| /* |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Alex Zuepke <azu@sysgo.de> |
| * |
| * Configuation settings for the Shannon/TuxScreen/IS2630 WebPhone Board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * If we are developing, we might want to start armboot from ram |
| * so we MUST NOT initialize critical regs like mem-timing ... |
| */ |
| |
| /* |
| * we just run in non-critical mode now, because we use the Inferno-Loader to |
| * bring us to live |
| */ |
| #define CONFIG_INFERNO /* we are using the inferno bootldr */ |
| #undef CONFIG_INIT_CRITICAL /* undef for developing */ |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_SA1100 1 /* This is an SA1100 CPU */ |
| #define CONFIG_SHANNON 1 /* on an SHANNON/TuxScreen Board */ |
| |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) |
| |
| /* |
| * Hardware drivers |
| */ |
| #define CONFIG_DRIVER_3C589 1 |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_SERIAL3 1 /* we use SERIAL 3 */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_BAUDRATE 115200 |
| |
| #if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */ |
| #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ |
| CFG_CMD_PCMCIA | \ |
| CFG_CMD_IDE) |
| #endif /* 0 */ |
| |
| /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
| #include <cmd_confdefs.h> |
| |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" |
| #define CONFIG_NETMASK 255.255.0.0 |
| #define CONFIG_BOOTCOMMAND "help" |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
| #endif |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CFG_PROMPT "TuxScreen # " /* Monitor Command Prompt */ |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CFG_MEMTEST_START 0xc0400000 /* memtest works on */ |
| #define CFG_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ |
| |
| #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
| |
| #define CFG_LOAD_ADDR 0xd0000000 /* default load address */ |
| |
| #define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ |
| #define CFG_CPUSPEED 0x09 /* 190 MHz for Shannon */ |
| |
| /* valid baudrates */ |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| #define CONFIG_DOS_PARTITION 1 /* DOS partitiion support */ |
| |
| /*----------------------------------------------------------------------- |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| */ |
| /* BE CAREFUL */ |
| #define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of EDORAM */ |
| #define PHYS_SDRAM_1 0xc0000000 /* RAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x00400000 /* 4 MB */ |
| #define PHYS_SDRAM_2 0xc8000000 /* RAM Bank #2 */ |
| #define PHYS_SDRAM_2_SIZE 0x00400000 /* 4 MB */ |
| #define PHYS_SDRAM_3 0xd0000000 /* RAM Bank #3 */ |
| #define PHYS_SDRAM_3_SIZE 0x00400000 /* 4 MB */ |
| #define PHYS_SDRAM_4 0xd8000000 /* RAM Bank #4 */ |
| #define PHYS_SDRAM_4_SIZE 0x00400000 /* 4 MB */ |
| |
| |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */ |
| |
| #define CFG_FLASH_BASE PHYS_FLASH_1 |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CFG_MAX_FLASH_SECT (31+4) /* max number of sectors on one chip */ |
| |
| /* timeout values are in ticks */ |
| #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ |
| #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ |
| |
| #define CFG_ENV_IS_IN_FLASH 1 |
| #ifdef CONFIG_INFERNO |
| /* we take the last sector, 128 KB in size, but we only use 4 KB of it for stack reasons */ |
| #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x003E0000) /* Addr of Environment Sector */ |
| #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ |
| #else |
| #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ |
| #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * PCMCIA stuff |
| *----------------------------------------------------------------------- |
| * |
| */ |
| |
| /* we pick the upper one */ |
| |
| #define CONFIG_PCMCIA_SLOT_A |
| |
| #define CFG_PCMCIA_IO_ADDR (0x20000000) |
| #define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) |
| #define CFG_PCMCIA_DMA_ADDR (0x24000000) |
| #define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) |
| #define CFG_PCMCIA_ATTRB_ADDR (0x2C000000) |
| #define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) |
| #define CFG_PCMCIA_MEM_ADDR (0x28000000) |
| #define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) |
| |
| /* in fact, MEM and ATTRB are swapped - has to be corrected soon in cmd_pcmcia or so */ |
| |
| /*----------------------------------------------------------------------- |
| * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) |
| *----------------------------------------------------------------------- |
| */ |
| |
| #define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */ |
| |
| #undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */ |
| #undef CONFIG_IDE_LED /* LED for ide not supported */ |
| #undef CONFIG_IDE_RESET /* reset for ide not supported */ |
| |
| #define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ |
| #define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ |
| |
| #define CFG_ATA_IDE0_OFFSET 0x0000 |
| |
| /* it's simple, all regs are in I/O space */ |
| #define CFG_ATA_BASE_ADDR CFG_PCMCIA_ATTRB_ADDR |
| |
| /* Offset for data I/O */ |
| #define CFG_ATA_DATA_OFFSET 0 |
| |
| /* Offset for normal register accesses */ |
| #define CFG_ATA_REG_OFFSET 0 |
| |
| /* Offset for alternate registers */ |
| #define CFG_ATA_ALT_OFFSET 0 |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| #endif /* __CONFIG_H */ |