| /* |
| * (C) Copyright 2010,2011 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <asm/sizes.h> |
| |
| /* LP0 suspend / resume */ |
| #define CONFIG_TEGRA_LP0 |
| #define CONFIG_AES |
| #define CONFIG_TEGRA_PMU |
| #define CONFIG_TPS6586X_POWER |
| #define CONFIG_TEGRA_CLOCK_SCALING |
| |
| #include "tegra20-common.h" |
| |
| /* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ |
| #define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard |
| #define CONFIG_OF_CONTROL |
| #define CONFIG_OF_SEPARATE |
| |
| /* High-level configuration options */ |
| #define V_PROMPT "Tegra20 (SeaBoard) # " |
| #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" |
| |
| /* Board-specific serial config */ |
| #define CONFIG_TEGRA_ENABLE_UARTD |
| #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE |
| |
| /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ |
| #define CONFIG_UART_DISABLE_GPIO GPIO_PI3 |
| |
| #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD |
| |
| #define CONFIG_BOARD_EARLY_INIT_F |
| |
| /* I2C */ |
| #define CONFIG_TEGRA_I2C |
| #define CONFIG_SYS_I2C_INIT_BOARD |
| #define CONFIG_I2C_MULTI_BUS |
| #define CONFIG_SYS_MAX_I2C_BUS 4 |
| #define CONFIG_SYS_I2C_SPEED 100000 |
| #define CONFIG_CMD_I2C |
| |
| /* SD/MMC */ |
| #define CONFIG_MMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_TEGRA_MMC |
| #define CONFIG_CMD_MMC |
| |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_EFI_PARTITION |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_FAT |
| |
| /* Environment in eMMC, at the end of 2nd "boot sector" */ |
| #define CONFIG_ENV_IS_IN_MMC |
| #define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| #define CONFIG_SYS_MMC_ENV_PART 2 |
| |
| /* USB Host support */ |
| #define CONFIG_USB_EHCI |
| #define CONFIG_USB_EHCI_TEGRA |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_CMD_USB |
| |
| /* USB networking support */ |
| #define CONFIG_USB_HOST_ETHER |
| #define CONFIG_USB_ETHER_ASIX |
| |
| /* General networking support */ |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_DHCP |
| |
| /* Enable keyboard */ |
| #define CONFIG_TEGRA_KEYBOARD |
| #define CONFIG_KEYBOARD |
| |
| #undef TEGRA_DEVICE_SETTINGS |
| #define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ |
| "stdout=serial\0" \ |
| "stderr=serial\0" |
| |
| #include "tegra-common-post.h" |
| |
| /* NAND support */ |
| #define CONFIG_CMD_NAND |
| #define CONFIG_TEGRA_NAND |
| |
| /* Max number of NAND devices */ |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| |
| /* Somewhat oddly, the NAND base address must be a config option */ |
| #define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE |
| #endif /* __CONFIG_H */ |