blob: 6300587db02b37a9b4e809d10d6b9a3eb0e30720 [file] [log] [blame]
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <asm/io.h>
#include <usb.h>
#include "ehci.h"
#include "ehci-core.h"
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#define rdl(off) readl(KW_USB20_BASE + (off))
#define wrl(off, val) writel((val), KW_USB20_BASE + (off))
#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
#define USB_TARGET_DRAM 0x0
/*
* USB 2.0 Bridge Address Decoding registers setup
*/
static void usb_brg_adrdec_setup(void)
{
int i;
u32 size, attrib;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
/* Enable DRAM bank */
switch (i) {
case 0:
attrib = KWCPU_ATTR_DRAM_CS0;
break;
case 1:
attrib = KWCPU_ATTR_DRAM_CS1;
break;
case 2:
attrib = KWCPU_ATTR_DRAM_CS2;
break;
case 3:
attrib = KWCPU_ATTR_DRAM_CS3;
break;
default:
/* invalide bank, disable access */
attrib = 0;
break;
}
size = kw_sdram_bs(i);
if ((size) && (attrib))
wrl(USB_WINDOW_CTRL(i),
KWCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
attrib, KWCPU_WIN_ENABLE));
else
wrl(USB_WINDOW_CTRL(i), KWCPU_WIN_DISABLE);
wrl(USB_WINDOW_BASE(i), kw_sdram_bar(i));
}
}
/*
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
int ehci_hcd_init(void)
{
usb_brg_adrdec_setup();
hccr = (struct ehci_hccr *)(KW_USB20_BASE + 0x100);
hcor = (struct ehci_hcor *)((uint32_t) hccr
+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
debug("Kirkwood-ehci: init hccr %x and hcor %x hc_length %d\n",
(uint32_t)hccr, (uint32_t)hcor,
(uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
return 0;
}
/*
* Destroy the appropriate control structures corresponding
* the the EHCI host controller.
*/
int ehci_hcd_stop(void)
{
return 0;
}