| /****************************************************************************** |
| * |
| * Name: skgedrv.h |
| * Project: GEnesis, PCI Gigabit Ethernet Adapter |
| * Version: $Revision: 1.6 $ |
| * Date: $Date: 2002/07/15 15:38:01 $ |
| * Purpose: Interface with the driver |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * (C)Copyright 1998-2002 SysKonnect GmbH. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * The information in this file is provided "AS IS" without warranty. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * History: |
| * |
| * $Log: skgedrv.h,v $ |
| * Revision 1.6 2002/07/15 15:38:01 rschmidt |
| * Power Management support |
| * Editorial changes |
| * |
| * Revision 1.5 2002/04/25 11:05:47 rschmidt |
| * Editorial changes |
| * |
| * Revision 1.4 1999/11/22 13:52:46 cgoos |
| * Changed license header to GPL. |
| * |
| * Revision 1.3 1998/12/01 13:31:39 cgoos |
| * SWITCH INTERN Event added. |
| * |
| * Revision 1.2 1998/11/25 08:28:38 gklug |
| * rmv: PORT SWITCH Event |
| * |
| * Revision 1.1 1998/09/29 06:14:07 gklug |
| * add: driver events (initial version) |
| * |
| * |
| ******************************************************************************/ |
| |
| #ifndef __INC_SKGEDRV_H_ |
| #define __INC_SKGEDRV_H_ |
| |
| /* defines ********************************************************************/ |
| |
| /* |
| * Define the driver events. |
| * Usually the events are defined by the destination module. |
| * In case of the driver we put the definition of the events here. |
| */ |
| #define SK_DRV_PORT_RESET 1 /* The port needs to be reset */ |
| #define SK_DRV_NET_UP 2 /* The net is operational */ |
| #define SK_DRV_NET_DOWN 3 /* The net is down */ |
| #define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */ |
| #define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */ |
| #define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */ |
| #define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */ |
| #define SK_DRV_PORT_FAIL 8 /* One port fails */ |
| #define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */ |
| #define SK_DRV_POWER_DOWN 10 /* Power down mode */ |
| |
| #endif /* __INC_SKGEDRV_H_ */ |