| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * TI serdes driver for keystone2. |
| * |
| * (C) Copyright 2014 |
| * Texas Instruments Incorporated, <www.ti.com> |
| */ |
| |
| #include <errno.h> |
| #include <common.h> |
| #include <asm/ti-common/keystone_serdes.h> |
| #include <linux/bitops.h> |
| |
| #define SERDES_CMU_REGS(x) (0x0000 + (0x0c00 * (x))) |
| #define SERDES_LANE_REGS(x) (0x0200 + (0x200 * (x))) |
| #define SERDES_COMLANE_REGS 0x0a00 |
| #define SERDES_WIZ_REGS 0x1fc0 |
| |
| #define SERDES_CMU_REG_000(x) (SERDES_CMU_REGS(x) + 0x000) |
| #define SERDES_CMU_REG_010(x) (SERDES_CMU_REGS(x) + 0x010) |
| #define SERDES_COMLANE_REG_000 (SERDES_COMLANE_REGS + 0x000) |
| #define SERDES_LANE_REG_000(x) (SERDES_LANE_REGS(x) + 0x000) |
| #define SERDES_LANE_REG_028(x) (SERDES_LANE_REGS(x) + 0x028) |
| #define SERDES_LANE_CTL_STATUS_REG(x) (SERDES_WIZ_REGS + 0x0020 + (4 * (x))) |
| #define SERDES_PLL_CTL_REG (SERDES_WIZ_REGS + 0x0034) |
| |
| #define SERDES_RESET BIT(28) |
| #define SERDES_LANE_RESET BIT(29) |
| #define SERDES_LANE_LOOPBACK BIT(30) |
| #define SERDES_LANE_EN_VAL(x, y, z) (x[y] | (z << 26) | (z << 10)) |
| |
| #define SERDES_CMU_CFG_NUM 5 |
| #define SERDES_COMLANE_CFG_NUM 10 |
| #define SERDES_LANE_CFG_NUM 10 |
| |
| struct serdes_cfg { |
| u32 ofs; |
| u32 val; |
| u32 mask; |
| }; |
| |
| struct cfg_entry { |
| enum ks2_serdes_clock clk; |
| enum ks2_serdes_rate rate; |
| struct serdes_cfg cmu[SERDES_CMU_CFG_NUM]; |
| struct serdes_cfg comlane[SERDES_COMLANE_CFG_NUM]; |
| struct serdes_cfg lane[SERDES_LANE_CFG_NUM]; |
| }; |
| |
| /* SERDES PHY lane enable configuration value, indexed by PHY interface */ |
| static u32 serdes_cfg_lane_enable[] = { |
| 0xf000f0c0, /* SGMII */ |
| 0xf0e9f038, /* PCSR */ |
| }; |
| |
| /* SERDES PHY PLL enable configuration value, indexed by PHY interface */ |
| static u32 serdes_cfg_pll_enable[] = { |
| 0xe0000000, /* SGMII */ |
| 0xee000000, /* PCSR */ |
| }; |
| |
| /** |
| * Array to hold all possible serdes configurations. |
| * Combination for 5 clock settings and 6 baud rates. |
| */ |
| static struct cfg_entry cfgs[] = { |
| { |
| .clk = SERDES_CLOCK_156P25M, |
| .rate = SERDES_RATE_5G, |
| .cmu = { |
| {0x0000, 0x00800000, 0xffff0000}, |
| {0x0014, 0x00008282, 0x0000ffff}, |
| {0x0060, 0x00142438, 0x00ffffff}, |
| {0x0064, 0x00c3c700, 0x00ffff00}, |
| {0x0078, 0x0000c000, 0x0000ff00} |
| }, |
| .comlane = { |
| {0x0a00, 0x00000800, 0x0000ff00}, |
| {0x0a08, 0x38a20000, 0xffff0000}, |
| {0x0a30, 0x008a8a00, 0x00ffff00}, |
| {0x0a84, 0x00000600, 0x0000ff00}, |
| {0x0a94, 0x10000000, 0xff000000}, |
| {0x0aa0, 0x81000000, 0xff000000}, |
| {0x0abc, 0xff000000, 0xff000000}, |
| {0x0ac0, 0x0000008b, 0x000000ff}, |
| {0x0b08, 0x583f0000, 0xffff0000}, |
| {0x0b0c, 0x0000004e, 0x000000ff} |
| }, |
| .lane = { |
| {0x0004, 0x38000080, 0xff0000ff}, |
| {0x0008, 0x00000000, 0x000000ff}, |
| {0x000c, 0x02000000, 0xff000000}, |
| {0x0010, 0x1b000000, 0xff000000}, |
| {0x0014, 0x00006fb8, 0x0000ffff}, |
| {0x0018, 0x758000e4, 0xffff00ff}, |
| {0x00ac, 0x00004400, 0x0000ff00}, |
| {0x002c, 0x00100800, 0x00ffff00}, |
| {0x0080, 0x00820082, 0x00ff00ff}, |
| {0x0084, 0x1d0f0385, 0xffffffff} |
| }, |
| }, |
| }; |
| |
| static inline void ks2_serdes_rmw(u32 addr, u32 value, u32 mask) |
| { |
| writel(((readl(addr) & (~mask)) | (value & mask)), addr); |
| } |
| |
| static void ks2_serdes_cfg_setup(u32 base, struct serdes_cfg *cfg, u32 size) |
| { |
| u32 i; |
| |
| for (i = 0; i < size; i++) |
| ks2_serdes_rmw(base + cfg[i].ofs, cfg[i].val, cfg[i].mask); |
| } |
| |
| static void ks2_serdes_lane_config(u32 base, struct serdes_cfg *cfg_lane, |
| u32 size, u32 lane) |
| { |
| u32 i; |
| |
| for (i = 0; i < size; i++) |
| ks2_serdes_rmw(base + cfg_lane[i].ofs + SERDES_LANE_REGS(lane), |
| cfg_lane[i].val, cfg_lane[i].mask); |
| } |
| |
| static int ks2_serdes_init_cfg(u32 base, struct cfg_entry *cfg, u32 num_lanes) |
| { |
| u32 i; |
| |
| ks2_serdes_cfg_setup(base, cfg->cmu, SERDES_CMU_CFG_NUM); |
| ks2_serdes_cfg_setup(base, cfg->comlane, SERDES_COMLANE_CFG_NUM); |
| |
| for (i = 0; i < num_lanes; i++) |
| ks2_serdes_lane_config(base, cfg->lane, SERDES_LANE_CFG_NUM, i); |
| |
| return 0; |
| } |
| |
| static void ks2_serdes_cmu_comlane_enable(u32 base, struct ks2_serdes *serdes) |
| { |
| /* Bring SerDes out of Reset */ |
| ks2_serdes_rmw(base + SERDES_CMU_REG_010(0), 0x0, SERDES_RESET); |
| if (serdes->intf == SERDES_PHY_PCSR) |
| ks2_serdes_rmw(base + SERDES_CMU_REG_010(1), 0x0, SERDES_RESET); |
| |
| /* Enable CMU and COMLANE */ |
| ks2_serdes_rmw(base + SERDES_CMU_REG_000(0), 0x03, 0x000000ff); |
| if (serdes->intf == SERDES_PHY_PCSR) |
| ks2_serdes_rmw(base + SERDES_CMU_REG_000(1), 0x03, 0x000000ff); |
| |
| ks2_serdes_rmw(base + SERDES_COMLANE_REG_000, 0x5f, 0x000000ff); |
| } |
| |
| static void ks2_serdes_pll_enable(u32 base, struct ks2_serdes *serdes) |
| { |
| writel(serdes_cfg_pll_enable[serdes->intf], |
| base + SERDES_PLL_CTL_REG); |
| } |
| |
| static void ks2_serdes_lane_reset(u32 base, u32 reset, u32 lane) |
| { |
| if (reset) |
| ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane), |
| 0x1, SERDES_LANE_RESET); |
| else |
| ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane), |
| 0x0, SERDES_LANE_RESET); |
| } |
| |
| static void ks2_serdes_lane_enable(u32 base, |
| struct ks2_serdes *serdes, u32 lane) |
| { |
| /* Bring lane out of reset */ |
| ks2_serdes_lane_reset(base, 0, lane); |
| |
| writel(SERDES_LANE_EN_VAL(serdes_cfg_lane_enable, serdes->intf, |
| serdes->rate_mode), |
| base + SERDES_LANE_CTL_STATUS_REG(lane)); |
| |
| /* Set NES bit if Loopback Enabled */ |
| if (serdes->loopback) |
| ks2_serdes_rmw(base + SERDES_LANE_REG_000(lane), |
| 0x1, SERDES_LANE_LOOPBACK); |
| } |
| |
| int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes) |
| { |
| int i; |
| int ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(cfgs); i++) |
| if (serdes->clk == cfgs[i].clk && serdes->rate == cfgs[i].rate) |
| break; |
| |
| if (i >= ARRAY_SIZE(cfgs)) { |
| puts("Cannot find keystone SerDes configuration"); |
| return -EINVAL; |
| } |
| |
| ks2_serdes_init_cfg(base, &cfgs[i], num_lanes); |
| |
| ks2_serdes_cmu_comlane_enable(base, serdes); |
| for (i = 0; i < num_lanes; i++) |
| ks2_serdes_lane_enable(base, serdes, i); |
| |
| ks2_serdes_pll_enable(base, serdes); |
| |
| return ret; |
| } |