blob: 563f52c5fdb3640842ff9add8daf5c7f335cf09c [file] [log] [blame]
menu "mpc83xx CPU"
depends on MPC83xx
config DEFAULT_IMMR
hex
default 0xFF400000
config E300
def_bool y
config SYS_CPU
default "mpc83xx"
config SYS_83XX_DDR_USES_CS0
bool
help
DDR should be configured using CS0 and CS1 instead of CS2 and CS3.
choice
prompt "Target select"
optional
config TARGET_MPC837XERDB
bool "Support MPC837XERDB"
select ARCH_MPC837X
select BOARD_EARLY_INIT_F
select SYS_83XX_DDR_USES_CS0
config TARGET_KMETER1
bool "Support kmeter1"
select VENDOR_KM
select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_KMCOGE5NE
bool "Support kmcoge5ne"
select VENDOR_KM
select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_KMTEGR1
bool "Support kmtegr1"
select VENDOR_KM
select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_TUXX1
bool "Support tuxx1"
select VENDOR_KM
select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_KMSUPX5
bool "Support kmsupx5"
select VENDOR_KM
select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_TUGE1
bool "Support tuge1"
select VENDOR_KM
select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_KMOPTI2
bool "Support kmopti2"
select VENDOR_KM
select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_KMTEPR2
bool "Support kmtepr2"
select VENDOR_KM
select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_GAZERBEAM
bool "Support gazerbeam"
select ARCH_MPC8308
select SYS_FSL_ERRATUM_ESDHC111
imply ENV_IS_IN_FLASH
help
The "Gazerbeam" is a modular system by Guntermann & Drunck GmbH
Systementwicklung based on the NXP MPC8308 SoC for usage in KVM
appliances.
Features include:
* Two gigabit ethernet ports
* Multiple USB ports (depending on variant)
* Several gigabit ethernet or optical fiber ports (depending on
variant)
* Several display port inputs and outputs, and supporting redrivers
(depending on variant)
* Several FPGAs with custom logic (depending on variant)
endchoice
config MPC83XX_QUICC_ENGINE
bool
# TODO: Imply MPC83xx PCI driver
config MPC83XX_PCI_SUPPORT
bool
# TODO: Imply TSEC driver
config MPC83XX_TSEC1_SUPPORT
bool
config MPC83XX_TSEC2_SUPPORT
bool
config MPC83XX_PCIE1_SUPPORT
bool
config MPC83XX_PCIE2_SUPPORT
bool
config MPC83XX_SDHC_SUPPORT
bool
config MPC83XX_SATA
bool
config MPC83XX_SECOND_I2C
bool
config MPC83XX_LDP_PIN
bool
config ARCH_MPC830X
bool
select MPC83XX_SDHC_SUPPORT
select SYS_CACHE_SHIFT_5
config ARCH_MPC8308
bool
select ARCH_MPC830X
select MPC83XX_TSEC1_SUPPORT
select MPC83XX_TSEC2_SUPPORT
select MPC83XX_PCIE1_SUPPORT
select MPC83XX_SECOND_I2C
config ARCH_MPC831X
bool
select MPC83XX_PCI_SUPPORT
select MPC83XX_TSEC1_SUPPORT
select MPC83XX_TSEC2_SUPPORT
select SYS_CACHE_SHIFT_5
config ARCH_MPC8313
bool
select ARCH_MPC831X
select MPC83XX_SECOND_I2C
select FSL_ELBC
config ARCH_MPC832X
bool
select MPC83XX_QUICC_ENGINE
select MPC83XX_PCI_SUPPORT
select SYS_CACHE_SHIFT_5
config ARCH_MPC834X
bool
select SYS_CACHE_SHIFT_5
config ARCH_MPC8360
bool
select MPC83XX_QUICC_ENGINE
select MPC83XX_PCI_SUPPORT
select MPC83XX_LDP_PIN
select MPC83XX_SECOND_I2C
select SYS_CACHE_SHIFT_5
config ARCH_MPC837X
bool
select MPC83XX_PCI_SUPPORT
select MPC83XX_TSEC1_SUPPORT
select MPC83XX_TSEC2_SUPPORT
select MPC83XX_PCIE1_SUPPORT
select MPC83XX_PCIE2_SUPPORT
select MPC83XX_SDHC_SUPPORT
select MPC83XX_SATA
select MPC83XX_LDP_PIN
select MPC83XX_SECOND_I2C
select SYS_CACHE_SHIFT_5
select FSL_ELBC
source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig"
source "arch/powerpc/cpu/mpc83xx/bats/Kconfig"
source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig"
source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig"
source "arch/powerpc/cpu/mpc83xx/hid/Kconfig"
source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig"
source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig"
source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig"
config 83XX_PCICLK
hex "PCI clock frequency"
default 0xDEADBEEF
help
If required, the PCI clock frequency to use when configuring
the host bridge.
config FSL_ELBC
bool
config FSL_SERDES
bool "SerDes initialization"
depends on !MPC83XX_SERDES
source "board/freescale/mpc837xerdb/Kconfig"
source "board/gdsys/mpc8308/Kconfig"
endmenu