| // SPDX-License-Identifier: GPL-2.0 |
| /** |
| * dwc3-omap.c - OMAP Specific Glue layer |
| * |
| * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com |
| * |
| * Authors: Felipe Balbi <balbi@ti.com>, |
| * Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| * |
| * Taken from Linux Kernel v3.19-rc1 (drivers/usb/dwc3/dwc3-omap.c) and ported |
| * to uboot. |
| * |
| * commit 7ee2566ff5 : usb: dwc3: dwc3-omap: get rid of ->prepare()/->complete() |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <asm/io.h> |
| #include <dm.h> |
| #include <dwc3-omap-uboot.h> |
| #include <dm/device_compat.h> |
| #include <dm/devres.h> |
| #include <linux/usb/dwc3-omap.h> |
| #include <linux/ioport.h> |
| |
| #include <linux/usb/otg.h> |
| #include <linux/compat.h> |
| |
| #include "linux-compat.h" |
| |
| /* |
| * All these registers belong to OMAP's Wrapper around the |
| * DesignWare USB3 Core. |
| */ |
| |
| #define USBOTGSS_REVISION 0x0000 |
| #define USBOTGSS_SYSCONFIG 0x0010 |
| #define USBOTGSS_IRQ_EOI 0x0020 |
| #define USBOTGSS_EOI_OFFSET 0x0008 |
| #define USBOTGSS_IRQSTATUS_RAW_0 0x0024 |
| #define USBOTGSS_IRQSTATUS_0 0x0028 |
| #define USBOTGSS_IRQENABLE_SET_0 0x002c |
| #define USBOTGSS_IRQENABLE_CLR_0 0x0030 |
| #define USBOTGSS_IRQ0_OFFSET 0x0004 |
| #define USBOTGSS_IRQSTATUS_RAW_1 0x0030 |
| #define USBOTGSS_IRQSTATUS_1 0x0034 |
| #define USBOTGSS_IRQENABLE_SET_1 0x0038 |
| #define USBOTGSS_IRQENABLE_CLR_1 0x003c |
| #define USBOTGSS_IRQSTATUS_RAW_2 0x0040 |
| #define USBOTGSS_IRQSTATUS_2 0x0044 |
| #define USBOTGSS_IRQENABLE_SET_2 0x0048 |
| #define USBOTGSS_IRQENABLE_CLR_2 0x004c |
| #define USBOTGSS_IRQSTATUS_RAW_3 0x0050 |
| #define USBOTGSS_IRQSTATUS_3 0x0054 |
| #define USBOTGSS_IRQENABLE_SET_3 0x0058 |
| #define USBOTGSS_IRQENABLE_CLR_3 0x005c |
| #define USBOTGSS_IRQSTATUS_EOI_MISC 0x0030 |
| #define USBOTGSS_IRQSTATUS_RAW_MISC 0x0034 |
| #define USBOTGSS_IRQSTATUS_MISC 0x0038 |
| #define USBOTGSS_IRQENABLE_SET_MISC 0x003c |
| #define USBOTGSS_IRQENABLE_CLR_MISC 0x0040 |
| #define USBOTGSS_IRQMISC_OFFSET 0x03fc |
| #define USBOTGSS_UTMI_OTG_CTRL 0x0080 |
| #define USBOTGSS_UTMI_OTG_STATUS 0x0084 |
| #define USBOTGSS_UTMI_OTG_OFFSET 0x0480 |
| #define USBOTGSS_TXFIFO_DEPTH 0x0508 |
| #define USBOTGSS_RXFIFO_DEPTH 0x050c |
| #define USBOTGSS_MMRAM_OFFSET 0x0100 |
| #define USBOTGSS_FLADJ 0x0104 |
| #define USBOTGSS_DEBUG_CFG 0x0108 |
| #define USBOTGSS_DEBUG_DATA 0x010c |
| #define USBOTGSS_DEV_EBC_EN 0x0110 |
| #define USBOTGSS_DEBUG_OFFSET 0x0600 |
| |
| /* SYSCONFIG REGISTER */ |
| #define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16) |
| |
| /* IRQ_EOI REGISTER */ |
| #define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0) |
| |
| /* IRQS0 BITS */ |
| #define USBOTGSS_IRQO_COREIRQ_ST (1 << 0) |
| |
| /* IRQMISC BITS */ |
| #define USBOTGSS_IRQMISC_DMADISABLECLR (1 << 17) |
| #define USBOTGSS_IRQMISC_OEVT (1 << 16) |
| #define USBOTGSS_IRQMISC_DRVVBUS_RISE (1 << 13) |
| #define USBOTGSS_IRQMISC_CHRGVBUS_RISE (1 << 12) |
| #define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE (1 << 11) |
| #define USBOTGSS_IRQMISC_IDPULLUP_RISE (1 << 8) |
| #define USBOTGSS_IRQMISC_DRVVBUS_FALL (1 << 5) |
| #define USBOTGSS_IRQMISC_CHRGVBUS_FALL (1 << 4) |
| #define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3) |
| #define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0) |
| |
| #define USBOTGSS_INTERRUPTS (USBOTGSS_IRQMISC_OEVT | \ |
| USBOTGSS_IRQMISC_DRVVBUS_RISE | \ |
| USBOTGSS_IRQMISC_CHRGVBUS_RISE | \ |
| USBOTGSS_IRQMISC_DISCHRGVBUS_RISE | \ |
| USBOTGSS_IRQMISC_IDPULLUP_RISE | \ |
| USBOTGSS_IRQMISC_DRVVBUS_FALL | \ |
| USBOTGSS_IRQMISC_CHRGVBUS_FALL | \ |
| USBOTGSS_IRQMISC_DISCHRGVBUS_FALL | \ |
| USBOTGSS_IRQMISC_IDPULLUP_FALL) |
| |
| /* UTMI_OTG_CTRL REGISTER */ |
| #define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5) |
| #define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4) |
| #define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3) |
| #define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0) |
| |
| /* UTMI_OTG_STATUS REGISTER */ |
| #define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31) |
| #define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9) |
| #define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8) |
| #define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4) |
| #define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3) |
| #define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2) |
| #define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1) |
| |
| struct dwc3_omap { |
| struct device *dev; |
| |
| void __iomem *base; |
| |
| u32 utmi_otg_status; |
| u32 utmi_otg_offset; |
| u32 irqmisc_offset; |
| u32 irq_eoi_offset; |
| u32 debug_offset; |
| u32 irq0_offset; |
| |
| u32 dma_status:1; |
| struct list_head list; |
| u32 index; |
| }; |
| |
| static LIST_HEAD(dwc3_omap_list); |
| |
| static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) |
| { |
| return readl(base + offset); |
| } |
| |
| static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) |
| { |
| writel(value, base + offset); |
| } |
| |
| static u32 dwc3_omap_read_utmi_status(struct dwc3_omap *omap) |
| { |
| return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS + |
| omap->utmi_otg_offset); |
| } |
| |
| static void dwc3_omap_write_utmi_status(struct dwc3_omap *omap, u32 value) |
| { |
| dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS + |
| omap->utmi_otg_offset, value); |
| |
| } |
| |
| static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap) |
| { |
| return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 - |
| omap->irq0_offset); |
| } |
| |
| static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value) |
| { |
| dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0 - |
| omap->irq0_offset, value); |
| |
| } |
| |
| static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap) |
| { |
| return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC + |
| omap->irqmisc_offset); |
| } |
| |
| static void dwc3_omap_write_irqmisc_status(struct dwc3_omap *omap, u32 value) |
| { |
| dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_MISC + |
| omap->irqmisc_offset, value); |
| |
| } |
| |
| static void dwc3_omap_write_irqmisc_set(struct dwc3_omap *omap, u32 value) |
| { |
| dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_MISC + |
| omap->irqmisc_offset, value); |
| |
| } |
| |
| static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value) |
| { |
| dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0 - |
| omap->irq0_offset, value); |
| } |
| |
| static void dwc3_omap_write_irqmisc_clr(struct dwc3_omap *omap, u32 value) |
| { |
| dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_MISC + |
| omap->irqmisc_offset, value); |
| } |
| |
| static void dwc3_omap_write_irq0_clr(struct dwc3_omap *omap, u32 value) |
| { |
| dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_0 - |
| omap->irq0_offset, value); |
| } |
| |
| static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, |
| enum omap_dwc3_vbus_id_status status) |
| { |
| u32 val; |
| |
| switch (status) { |
| case OMAP_DWC3_ID_GROUND: |
| dev_dbg(omap->dev, "ID GND\n"); |
| |
| val = dwc3_omap_read_utmi_status(omap); |
| val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG |
| | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
| | USBOTGSS_UTMI_OTG_STATUS_SESSEND); |
| val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
| | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; |
| dwc3_omap_write_utmi_status(omap, val); |
| break; |
| |
| case OMAP_DWC3_VBUS_VALID: |
| dev_dbg(omap->dev, "VBUS Connect\n"); |
| |
| val = dwc3_omap_read_utmi_status(omap); |
| val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND; |
| val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG |
| | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
| | USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
| | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; |
| dwc3_omap_write_utmi_status(omap, val); |
| break; |
| |
| case OMAP_DWC3_ID_FLOAT: |
| case OMAP_DWC3_VBUS_OFF: |
| dev_dbg(omap->dev, "VBUS Disconnect\n"); |
| |
| val = dwc3_omap_read_utmi_status(omap); |
| val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
| | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
| | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT); |
| val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND |
| | USBOTGSS_UTMI_OTG_STATUS_IDDIG; |
| dwc3_omap_write_utmi_status(omap, val); |
| break; |
| |
| default: |
| dev_dbg(omap->dev, "invalid state\n"); |
| } |
| } |
| |
| static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) |
| { |
| struct dwc3_omap *omap = _omap; |
| u32 reg; |
| |
| reg = dwc3_omap_read_irqmisc_status(omap); |
| |
| if (reg & USBOTGSS_IRQMISC_DMADISABLECLR) { |
| dev_dbg(omap->dev, "DMA Disable was Cleared\n"); |
| omap->dma_status = false; |
| } |
| |
| if (reg & USBOTGSS_IRQMISC_OEVT) |
| dev_dbg(omap->dev, "OTG Event\n"); |
| |
| if (reg & USBOTGSS_IRQMISC_DRVVBUS_RISE) |
| dev_dbg(omap->dev, "DRVVBUS Rise\n"); |
| |
| if (reg & USBOTGSS_IRQMISC_CHRGVBUS_RISE) |
| dev_dbg(omap->dev, "CHRGVBUS Rise\n"); |
| |
| if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_RISE) |
| dev_dbg(omap->dev, "DISCHRGVBUS Rise\n"); |
| |
| if (reg & USBOTGSS_IRQMISC_IDPULLUP_RISE) |
| dev_dbg(omap->dev, "IDPULLUP Rise\n"); |
| |
| if (reg & USBOTGSS_IRQMISC_DRVVBUS_FALL) |
| dev_dbg(omap->dev, "DRVVBUS Fall\n"); |
| |
| if (reg & USBOTGSS_IRQMISC_CHRGVBUS_FALL) |
| dev_dbg(omap->dev, "CHRGVBUS Fall\n"); |
| |
| if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_FALL) |
| dev_dbg(omap->dev, "DISCHRGVBUS Fall\n"); |
| |
| if (reg & USBOTGSS_IRQMISC_IDPULLUP_FALL) |
| dev_dbg(omap->dev, "IDPULLUP Fall\n"); |
| |
| dwc3_omap_write_irqmisc_status(omap, reg); |
| |
| reg = dwc3_omap_read_irq0_status(omap); |
| |
| dwc3_omap_write_irq0_status(omap, reg); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void dwc3_omap_enable_irqs(struct dwc3_omap *omap) |
| { |
| /* enable all IRQs */ |
| dwc3_omap_write_irq0_set(omap, USBOTGSS_IRQO_COREIRQ_ST); |
| |
| dwc3_omap_write_irqmisc_set(omap, USBOTGSS_INTERRUPTS); |
| } |
| |
| static void dwc3_omap_disable_irqs(struct dwc3_omap *omap) |
| { |
| /* disable all IRQs */ |
| dwc3_omap_write_irq0_clr(omap, USBOTGSS_IRQO_COREIRQ_ST); |
| |
| dwc3_omap_write_irqmisc_clr(omap, USBOTGSS_INTERRUPTS); |
| } |
| |
| static void dwc3_omap_map_offset(struct dwc3_omap *omap) |
| { |
| /* |
| * Differentiate between OMAP5 and AM437x. |
| * |
| * For OMAP5(ES2.0) and AM437x wrapper revision is same, even |
| * though there are changes in wrapper register offsets. |
| * |
| * Using dt compatible to differentiate AM437x. |
| */ |
| #ifdef CONFIG_AM43XX |
| omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET; |
| omap->irq0_offset = USBOTGSS_IRQ0_OFFSET; |
| omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET; |
| omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET; |
| omap->debug_offset = USBOTGSS_DEBUG_OFFSET; |
| #endif |
| } |
| |
| static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap, int utmi_mode) |
| { |
| u32 reg; |
| |
| reg = dwc3_omap_read_utmi_status(omap); |
| |
| switch (utmi_mode) { |
| case DWC3_OMAP_UTMI_MODE_SW: |
| reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; |
| break; |
| case DWC3_OMAP_UTMI_MODE_HW: |
| reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; |
| break; |
| default: |
| dev_dbg(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode); |
| } |
| |
| dwc3_omap_write_utmi_status(omap, reg); |
| } |
| |
| /** |
| * dwc3_omap_uboot_init - dwc3 omap uboot initialization code |
| * @dev: struct dwc3_omap_device containing initialization data |
| * |
| * Entry point for dwc3 omap driver (equivalent to dwc3_omap_probe in linux |
| * kernel driver). Pointer to dwc3_omap_device should be passed containing |
| * base address and other initialization data. Returns '0' on success and |
| * a negative value on failure. |
| * |
| * Generally called from board_usb_init() implemented in board file. |
| */ |
| int dwc3_omap_uboot_init(struct dwc3_omap_device *omap_dev) |
| { |
| u32 reg; |
| struct device *dev = NULL; |
| struct dwc3_omap *omap; |
| |
| omap = devm_kzalloc((struct udevice *)dev, sizeof(*omap), GFP_KERNEL); |
| if (!omap) |
| return -ENOMEM; |
| |
| omap->base = omap_dev->base; |
| omap->index = omap_dev->index; |
| |
| dwc3_omap_map_offset(omap); |
| dwc3_omap_set_utmi_mode(omap, omap_dev->utmi_mode); |
| |
| /* check the DMA Status */ |
| reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); |
| omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); |
| |
| dwc3_omap_set_mailbox(omap, omap_dev->vbus_id_status); |
| |
| dwc3_omap_enable_irqs(omap); |
| list_add_tail(&omap->list, &dwc3_omap_list); |
| |
| return 0; |
| } |
| |
| /** |
| * dwc3_omap_uboot_exit - dwc3 omap uboot cleanup code |
| * @index: index of this controller |
| * |
| * Performs cleanup of memory allocated in dwc3_omap_uboot_init |
| * (equivalent to dwc3_omap_remove in linux). index of _this_ controller |
| * should be passed and should match with the index passed in |
| * dwc3_omap_device during init. |
| * |
| * Generally called from board file. |
| */ |
| void dwc3_omap_uboot_exit(int index) |
| { |
| struct dwc3_omap *omap = NULL; |
| |
| list_for_each_entry(omap, &dwc3_omap_list, list) { |
| if (omap->index != index) |
| continue; |
| |
| dwc3_omap_disable_irqs(omap); |
| list_del(&omap->list); |
| kfree(omap); |
| break; |
| } |
| } |
| |
| /** |
| * dwc3_omap_uboot_interrupt_status - check the status of interrupt |
| * @index: index of this controller |
| * |
| * Checks the status of interrupts and returns true if an interrupt |
| * is detected or false otherwise. |
| * |
| * Generally called from board file. |
| */ |
| int dwc3_omap_uboot_interrupt_status(int index) |
| { |
| struct dwc3_omap *omap = NULL; |
| |
| list_for_each_entry(omap, &dwc3_omap_list, list) |
| if (omap->index == index) |
| return dwc3_omap_interrupt(-1, omap); |
| |
| return 0; |
| } |
| |
| MODULE_ALIAS("platform:omap-dwc3"); |
| MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer"); |