blob: b40199566e8346a33295b09687d30d8c8befa4ce [file] [log] [blame]
/*
* (C) Copyright 2004
* Greg Ungerer <greg.ungerer@opengear.com>.
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_KS8695 1 /* it is a KS8695 CPU */
#define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* Hardware drivers
*/
/*
* select serial console configuration
*/
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_KS8695_SERIAL
#define CONFIG_SERIAL1
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_SAVEENV
#define CONFIG_BOOTDELAY 0
#define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200"
#define CONFIG_BOOTCOMMAND "gofsk 0x02200000"
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */
#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */
#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */
#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */
#endif /* __CONFIG_H */