| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * (C) Copyright 2005 |
| * 2N Telekomunikace, a.s. <www.2n.cz> |
| * Ladislav Michl <michl@2n.cz> |
| */ |
| |
| #include <common.h> |
| #include <nand.h> |
| #include <errno.h> |
| #include <linux/mtd/concat.h> |
| #include <linux/mtd/rawnand.h> |
| |
| #ifndef CONFIG_SYS_NAND_BASE_LIST |
| #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } |
| #endif |
| |
| int nand_curr_device = -1; |
| |
| static struct mtd_info *nand_info[CONFIG_SYS_MAX_NAND_DEVICE]; |
| |
| #ifndef CONFIG_SYS_NAND_SELF_INIT |
| static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE]; |
| static ulong base_address[CONFIG_SYS_MAX_NAND_DEVICE] = CONFIG_SYS_NAND_BASE_LIST; |
| #endif |
| |
| static char dev_name[CONFIG_SYS_MAX_NAND_DEVICE][8]; |
| |
| static unsigned long total_nand_size; /* in kiB */ |
| |
| struct mtd_info *get_nand_dev_by_index(int dev) |
| { |
| if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev] || |
| !nand_info[dev]->name) |
| return NULL; |
| |
| return nand_info[dev]; |
| } |
| |
| int nand_mtd_to_devnum(struct mtd_info *mtd) |
| { |
| int i; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) { |
| if (mtd && get_nand_dev_by_index(i) == mtd) |
| return i; |
| } |
| |
| return -ENODEV; |
| } |
| |
| /* Register an initialized NAND mtd device with the U-Boot NAND command. */ |
| int nand_register(int devnum, struct mtd_info *mtd) |
| { |
| if (devnum >= CONFIG_SYS_MAX_NAND_DEVICE) |
| return -EINVAL; |
| |
| nand_info[devnum] = mtd; |
| |
| sprintf(dev_name[devnum], "nand%d", devnum); |
| mtd->name = dev_name[devnum]; |
| |
| #ifdef CONFIG_MTD |
| /* |
| * Add MTD device so that we can reference it later |
| * via the mtdcore infrastructure (e.g. ubi). |
| */ |
| add_mtd_device(mtd); |
| #endif |
| |
| total_nand_size += mtd->size / 1024; |
| |
| if (nand_curr_device == -1) |
| nand_curr_device = devnum; |
| |
| return 0; |
| } |
| |
| #if !CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) |
| static void nand_init_chip(int i) |
| { |
| struct nand_chip *nand = &nand_chip[i]; |
| struct mtd_info *mtd = nand_to_mtd(nand); |
| ulong base_addr = base_address[i]; |
| int maxchips = CONFIG_SYS_NAND_MAX_CHIPS; |
| |
| if (maxchips < 1) |
| maxchips = 1; |
| |
| nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr; |
| |
| if (board_nand_init(nand)) |
| return; |
| |
| if (nand_scan(mtd, maxchips)) |
| return; |
| |
| nand_register(i, mtd); |
| } |
| #endif |
| |
| #ifdef CONFIG_MTD_CONCAT |
| static void create_mtd_concat(void) |
| { |
| struct mtd_info *nand_info_list[CONFIG_SYS_MAX_NAND_DEVICE]; |
| int nand_devices_found = 0; |
| int i; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) { |
| struct mtd_info *mtd = get_nand_dev_by_index(i); |
| if (mtd != NULL) { |
| nand_info_list[nand_devices_found] = mtd; |
| nand_devices_found++; |
| } |
| } |
| if (nand_devices_found > 1) { |
| struct mtd_info *mtd; |
| char c_mtd_name[16]; |
| |
| /* |
| * We detected multiple devices. Concatenate them together. |
| */ |
| sprintf(c_mtd_name, "nand%d", nand_devices_found); |
| mtd = mtd_concat_create(nand_info_list, nand_devices_found, |
| c_mtd_name); |
| |
| if (mtd == NULL) |
| return; |
| |
| nand_register(nand_devices_found, mtd); |
| } |
| |
| return; |
| } |
| #else |
| static void create_mtd_concat(void) |
| { |
| } |
| #endif |
| |
| unsigned long nand_size(void) |
| { |
| return total_nand_size; |
| } |
| |
| void nand_init(void) |
| { |
| static int initialized; |
| |
| /* |
| * Avoid initializing NAND Flash multiple times, |
| * otherwise it will calculate a wrong total size. |
| */ |
| if (initialized) |
| return; |
| initialized = 1; |
| |
| #if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) |
| board_nand_init(); |
| #else |
| int i; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) |
| nand_init_chip(i); |
| #endif |
| |
| #ifdef CONFIG_SYS_NAND_SELECT_DEVICE |
| /* |
| * Select the chip in the board/cpu specific driver |
| */ |
| board_nand_select_device(mtd_to_nand(get_nand_dev_by_index(nand_curr_device)), |
| nand_curr_device); |
| #endif |
| |
| create_mtd_concat(); |
| } |