| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015 Samsung Electronics |
| * |
| * Przemyslaw Marczak <p.marczak@samsung.com> |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <asm/gpio.h> |
| #include <power/pmic.h> |
| #include <power/regulator.h> |
| |
| struct fixed_regulator_platdata { |
| struct gpio_desc gpio; /* GPIO for regulator enable control */ |
| unsigned int startup_delay_us; |
| unsigned int off_on_delay_us; |
| }; |
| |
| static int fixed_regulator_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| struct fixed_regulator_platdata *dev_pdata; |
| struct gpio_desc *gpio; |
| int flags = GPIOD_IS_OUT; |
| int ret; |
| |
| dev_pdata = dev_get_platdata(dev); |
| uc_pdata = dev_get_uclass_platdata(dev); |
| if (!uc_pdata) |
| return -ENXIO; |
| |
| /* Set type to fixed */ |
| uc_pdata->type = REGULATOR_TYPE_FIXED; |
| |
| if (dev_read_bool(dev, "enable-active-high")) |
| flags |= GPIOD_IS_OUT_ACTIVE; |
| |
| /* Get fixed regulator optional enable GPIO desc */ |
| gpio = &dev_pdata->gpio; |
| ret = gpio_request_by_name(dev, "gpio", 0, gpio, flags); |
| if (ret) { |
| debug("Fixed regulator optional enable GPIO - not found! Error: %d\n", |
| ret); |
| if (ret != -ENOENT) |
| return ret; |
| } |
| |
| /* Get optional ramp up delay */ |
| dev_pdata->startup_delay_us = dev_read_u32_default(dev, |
| "startup-delay-us", 0); |
| dev_pdata->off_on_delay_us = |
| dev_read_u32_default(dev, "u-boot,off-on-delay-us", 0); |
| |
| return 0; |
| } |
| |
| static int fixed_regulator_get_value(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| if (!uc_pdata) |
| return -ENXIO; |
| |
| if (uc_pdata->min_uV != uc_pdata->max_uV) { |
| debug("Invalid constraints for: %s\n", uc_pdata->name); |
| return -EINVAL; |
| } |
| |
| return uc_pdata->min_uV; |
| } |
| |
| static int fixed_regulator_get_current(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| if (!uc_pdata) |
| return -ENXIO; |
| |
| if (uc_pdata->min_uA != uc_pdata->max_uA) { |
| debug("Invalid constraints for: %s\n", uc_pdata->name); |
| return -EINVAL; |
| } |
| |
| return uc_pdata->min_uA; |
| } |
| |
| static int fixed_regulator_get_enable(struct udevice *dev) |
| { |
| struct fixed_regulator_platdata *dev_pdata = dev_get_platdata(dev); |
| |
| /* Enable GPIO is optional */ |
| if (!dev_pdata->gpio.dev) |
| return true; |
| |
| return dm_gpio_get_value(&dev_pdata->gpio); |
| } |
| |
| static int fixed_regulator_set_enable(struct udevice *dev, bool enable) |
| { |
| struct fixed_regulator_platdata *dev_pdata = dev_get_platdata(dev); |
| int ret; |
| |
| debug("%s: dev='%s', enable=%d, delay=%d, has_gpio=%d\n", __func__, |
| dev->name, enable, dev_pdata->startup_delay_us, |
| dm_gpio_is_valid(&dev_pdata->gpio)); |
| /* Enable GPIO is optional */ |
| if (!dm_gpio_is_valid(&dev_pdata->gpio)) { |
| if (!enable) |
| return -ENOSYS; |
| return 0; |
| } |
| |
| ret = dm_gpio_set_value(&dev_pdata->gpio, enable); |
| if (ret) { |
| pr_err("Can't set regulator : %s gpio to: %d\n", dev->name, |
| enable); |
| return ret; |
| } |
| |
| if (enable && dev_pdata->startup_delay_us) |
| udelay(dev_pdata->startup_delay_us); |
| debug("%s: done\n", __func__); |
| |
| if (!enable && dev_pdata->off_on_delay_us) |
| udelay(dev_pdata->off_on_delay_us); |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops fixed_regulator_ops = { |
| .get_value = fixed_regulator_get_value, |
| .get_current = fixed_regulator_get_current, |
| .get_enable = fixed_regulator_get_enable, |
| .set_enable = fixed_regulator_set_enable, |
| }; |
| |
| static const struct udevice_id fixed_regulator_ids[] = { |
| { .compatible = "regulator-fixed" }, |
| { }, |
| }; |
| |
| U_BOOT_DRIVER(fixed_regulator) = { |
| .name = "fixed regulator", |
| .id = UCLASS_REGULATOR, |
| .ops = &fixed_regulator_ops, |
| .of_match = fixed_regulator_ids, |
| .ofdata_to_platdata = fixed_regulator_ofdata_to_platdata, |
| .platdata_auto_alloc_size = sizeof(struct fixed_regulator_platdata), |
| }; |