| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| #include "k3-binman.dtsi" |
| |
| #ifdef CONFIG_TARGET_J7200_R5_EVM |
| |
| &bcfg_yaml { |
| config = "board-cfg_j7200.yaml"; |
| }; |
| |
| &rcfg_yaml { |
| config = "rm-cfg_j7200.yaml"; |
| }; |
| |
| &pcfg_yaml { |
| config = "pm-cfg_j7200.yaml"; |
| }; |
| |
| &scfg_yaml { |
| config = "sec-cfg_j7200.yaml"; |
| }; |
| |
| &bcfg_yaml_tifs { |
| config = "board-cfg_j7200.yaml"; |
| }; |
| |
| &rcfg_yaml_tifs { |
| config = "rm-cfg_j7200.yaml"; |
| }; |
| |
| &pcfg_yaml_tifs { |
| config = "pm-cfg_j7200.yaml"; |
| }; |
| |
| &scfg_yaml_tifs { |
| config = "sec-cfg_j7200.yaml"; |
| }; |
| |
| &rcfg_yaml_dm { |
| config = "rm-cfg_j7200.yaml"; |
| }; |
| |
| &pcfg_yaml_dm { |
| config = "pm-cfg_j7200.yaml"; |
| }; |
| |
| &binman { |
| tiboot3-j7200_sr2-hs-evm.bin { |
| filename = "tiboot3-j7200_sr2-hs-evm.bin"; |
| ti-secure-rom { |
| content = <&u_boot_spl>, <&ti_fs_enc>, <&combined_tifs_cfg>, |
| <&combined_dm_cfg>, <&sysfw_inner_cert>; |
| combined; |
| dm-data; |
| sysfw-inner-cert; |
| keyfile = "custMpk.pem"; |
| sw-rev = <1>; |
| content-sbl = <&u_boot_spl>; |
| content-sysfw = <&ti_fs_enc>; |
| content-sysfw-data = <&combined_tifs_cfg>; |
| content-sysfw-inner-cert = <&sysfw_inner_cert>; |
| content-dm-data = <&combined_dm_cfg>; |
| load = <0x41c00000>; |
| load-sysfw = <0x40000>; |
| load-sysfw-data = <0x7f000>; |
| load-dm-data = <0x41c80000>; |
| }; |
| u_boot_spl: u-boot-spl { |
| no-expanded; |
| }; |
| ti_fs_enc: ti-fs-enc.bin { |
| filename = "ti-sysfw/ti-fs-firmware-j7200_sr2-hs-enc.bin"; |
| type = "blob-ext"; |
| optional; |
| }; |
| combined_tifs_cfg: combined-tifs-cfg.bin { |
| filename = "combined-tifs-cfg.bin"; |
| type = "blob-ext"; |
| }; |
| sysfw_inner_cert: sysfw-inner-cert { |
| filename = "ti-sysfw/ti-fs-firmware-j7200_sr2-hs-cert.bin"; |
| type = "blob-ext"; |
| optional; |
| }; |
| combined_dm_cfg: combined-dm-cfg.bin { |
| filename = "combined-dm-cfg.bin"; |
| type = "blob-ext"; |
| }; |
| }; |
| }; |
| |
| &binman { |
| tiboot3-j7200_sr2-hs-fs-evm.bin { |
| filename = "tiboot3-j7200_sr2-hs-fs-evm.bin"; |
| ti-secure-rom { |
| content = <&u_boot_spl_fs>, <&ti_fs_enc_fs>, <&combined_tifs_cfg_fs>, |
| <&combined_dm_cfg_fs>, <&sysfw_inner_cert_fs>; |
| combined; |
| dm-data; |
| sysfw-inner-cert; |
| keyfile = "custMpk.pem"; |
| sw-rev = <1>; |
| content-sbl = <&u_boot_spl_fs>; |
| content-sysfw = <&ti_fs_enc_fs>; |
| content-sysfw-data = <&combined_tifs_cfg_fs>; |
| content-sysfw-inner-cert = <&sysfw_inner_cert_fs>; |
| content-dm-data = <&combined_dm_cfg_fs>; |
| load = <0x41c00000>; |
| load-sysfw = <0x40000>; |
| load-sysfw-data = <0x7f000>; |
| load-dm-data = <0x41c80000>; |
| }; |
| u_boot_spl_fs: u-boot-spl { |
| no-expanded; |
| }; |
| ti_fs_enc_fs: ti-fs-enc.bin { |
| filename = "ti-sysfw/ti-fs-firmware-j7200_sr2-hs-fs-enc.bin"; |
| type = "blob-ext"; |
| optional; |
| }; |
| combined_tifs_cfg_fs: combined-tifs-cfg.bin { |
| filename = "combined-tifs-cfg.bin"; |
| type = "blob-ext"; |
| }; |
| sysfw_inner_cert_fs: sysfw-inner-cert { |
| filename = "ti-sysfw/ti-fs-firmware-j7200_sr2-hs-fs-cert.bin"; |
| type = "blob-ext"; |
| optional; |
| }; |
| combined_dm_cfg_fs: combined-dm-cfg.bin { |
| filename = "combined-dm-cfg.bin"; |
| type = "blob-ext"; |
| }; |
| }; |
| }; |
| |
| &binman { |
| tiboot3-j7200-gp-evm.bin { |
| filename = "tiboot3-j7200-gp-evm.bin"; |
| symlink = "tiboot3.bin"; |
| ti-secure-rom { |
| content = <&u_boot_spl_unsigned>, <&ti_fs_gp>, |
| <&combined_tifs_cfg_gp>, <&combined_dm_cfg_gp>; |
| combined; |
| dm-data; |
| content-sbl = <&u_boot_spl_unsigned>; |
| load = <0x41c00000>; |
| content-sysfw = <&ti_fs_gp>; |
| load-sysfw = <0x40000>; |
| content-sysfw-data = <&combined_tifs_cfg_gp>; |
| load-sysfw-data = <0x7f000>; |
| content-dm-data = <&combined_dm_cfg_gp>; |
| load-dm-data = <0x41c80000>; |
| sw-rev = <1>; |
| keyfile = "ti-degenerate-key.pem"; |
| }; |
| u_boot_spl_unsigned: u-boot-spl { |
| no-expanded; |
| }; |
| ti_fs_gp: ti-fs-gp.bin { |
| filename = "ti-sysfw/ti-fs-firmware-j7200-gp.bin"; |
| type = "blob-ext"; |
| optional; |
| }; |
| combined_tifs_cfg_gp: combined-tifs-cfg-gp.bin { |
| filename = "combined-tifs-cfg.bin"; |
| type = "blob-ext"; |
| }; |
| combined_dm_cfg_gp: combined-dm-cfg-gp.bin { |
| filename = "combined-dm-cfg.bin"; |
| type = "blob-ext"; |
| }; |
| }; |
| }; |
| |
| #endif |
| |
| #ifdef CONFIG_TARGET_J7200_A72_EVM |
| |
| #define SPL_NODTB "spl/u-boot-spl-nodtb.bin" |
| #define SPL_J7200_EVM_DTB "spl/dts/k3-j7200-common-proc-board.dtb" |
| |
| #define UBOOT_NODTB "u-boot-nodtb.bin" |
| #define J7200_EVM_DTB "u-boot.dtb" |
| |
| &binman { |
| ti-dm { |
| filename = "ti-dm.bin"; |
| blob-ext { |
| filename = "ti-dm/j7200/ipc_echo_testb_mcu1_0_release_strip.xer5f"; |
| }; |
| }; |
| ti-spl { |
| filename = "tispl.bin"; |
| pad-byte = <0xff>; |
| |
| fit { |
| description = "Configuration to load ATF and SPL"; |
| #address-cells = <1>; |
| |
| images { |
| |
| atf { |
| description = "ARM Trusted Firmware"; |
| type = "firmware"; |
| arch = "arm64"; |
| compression = "none"; |
| os = "arm-trusted-firmware"; |
| load = <CONFIG_K3_ATF_LOAD_ADDR>; |
| entry = <CONFIG_K3_ATF_LOAD_ADDR>; |
| ti-secure { |
| content = <&atf>; |
| keyfile = "custMpk.pem"; |
| }; |
| atf: atf-bl31 { |
| }; |
| }; |
| |
| tee { |
| description = "OP-TEE"; |
| type = "tee"; |
| arch = "arm64"; |
| compression = "none"; |
| os = "tee"; |
| load = <0x9e800000>; |
| entry = <0x9e800000>; |
| ti-secure { |
| content = <&tee>; |
| keyfile = "custMpk.pem"; |
| }; |
| tee: tee-os { |
| }; |
| }; |
| |
| dm { |
| description = "DM binary"; |
| type = "firmware"; |
| arch = "arm32"; |
| compression = "none"; |
| os = "DM"; |
| load = <0x89000000>; |
| entry = <0x89000000>; |
| ti-secure { |
| content = <&dm>; |
| keyfile = "custMpk.pem"; |
| }; |
| |
| dm: blob-ext { |
| filename = "ti-dm.bin"; |
| }; |
| }; |
| |
| spl { |
| description = "SPL (64-bit)"; |
| type = "standalone"; |
| os = "U-Boot"; |
| arch = "arm64"; |
| compression = "none"; |
| load = <CONFIG_SPL_TEXT_BASE>; |
| entry = <CONFIG_SPL_TEXT_BASE>; |
| ti-secure { |
| content = <&u_boot_spl_nodtb>; |
| keyfile = "custMpk.pem"; |
| }; |
| u_boot_spl_nodtb: blob-ext { |
| filename = SPL_NODTB; |
| }; |
| }; |
| |
| fdt-0 { |
| description = "k3-j7200-common-proc-board"; |
| type = "flat_dt"; |
| arch = "arm"; |
| compression = "none"; |
| ti-secure { |
| content = <&spl_j7200_evm_dtb>; |
| keyfile = "custMpk.pem"; |
| }; |
| spl_j7200_evm_dtb: blob-ext { |
| filename = SPL_J7200_EVM_DTB; |
| }; |
| }; |
| |
| }; |
| |
| configurations { |
| default = "conf-0"; |
| |
| conf-0 { |
| description = "k3-j7200-common-proc-board"; |
| firmware = "atf"; |
| loadables = "tee", "dm", "spl"; |
| fdt = "fdt-0"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &binman { |
| u-boot { |
| filename = "u-boot.img"; |
| pad-byte = <0xff>; |
| |
| fit { |
| description = "FIT image with multiple configurations"; |
| |
| images { |
| uboot { |
| description = "U-Boot for J7200 board"; |
| type = "firmware"; |
| os = "u-boot"; |
| arch = "arm"; |
| compression = "none"; |
| load = <CONFIG_TEXT_BASE>; |
| ti-secure { |
| content = <&u_boot_nodtb>; |
| keyfile = "custMpk.pem"; |
| }; |
| u_boot_nodtb: u-boot-nodtb { |
| }; |
| hash { |
| algo = "crc32"; |
| }; |
| }; |
| |
| fdt-0 { |
| description = "k3-j7200-common-proc-board"; |
| type = "flat_dt"; |
| arch = "arm"; |
| compression = "none"; |
| ti-secure { |
| content = <&j7200_evm_dtb>; |
| keyfile = "custMpk.pem"; |
| }; |
| j7200_evm_dtb: blob-ext { |
| filename = J7200_EVM_DTB; |
| }; |
| hash { |
| algo = "crc32"; |
| }; |
| }; |
| }; |
| |
| configurations { |
| default = "conf-0"; |
| |
| conf-0 { |
| description = "k3-j7200-common-proc-board"; |
| firmware = "uboot"; |
| loadables = "uboot"; |
| fdt = "fdt-0"; |
| }; |
| |
| }; |
| }; |
| }; |
| }; |
| |
| &binman { |
| ti-spl_unsigned { |
| filename = "tispl.bin_unsigned"; |
| pad-byte = <0xff>; |
| |
| fit { |
| description = "Configuration to load ATF and SPL"; |
| #address-cells = <1>; |
| |
| images { |
| |
| atf { |
| description = "ARM Trusted Firmware"; |
| type = "firmware"; |
| arch = "arm64"; |
| compression = "none"; |
| os = "arm-trusted-firmware"; |
| load = <CONFIG_K3_ATF_LOAD_ADDR>; |
| entry = <CONFIG_K3_ATF_LOAD_ADDR>; |
| atf-bl31 { |
| filename = "bl31.bin"; |
| }; |
| }; |
| |
| tee { |
| description = "OP-TEE"; |
| type = "tee"; |
| arch = "arm64"; |
| compression = "none"; |
| os = "tee"; |
| load = <0x9e800000>; |
| entry = <0x9e800000>; |
| tee-os { |
| filename = "tee-raw.bin"; |
| }; |
| }; |
| |
| dm { |
| description = "DM binary"; |
| type = "firmware"; |
| arch = "arm32"; |
| compression = "none"; |
| os = "DM"; |
| load = <0x89000000>; |
| entry = <0x89000000>; |
| blob-ext { |
| filename = "ti-dm.bin"; |
| }; |
| }; |
| |
| spl { |
| description = "SPL (64-bit)"; |
| type = "standalone"; |
| os = "U-Boot"; |
| arch = "arm64"; |
| compression = "none"; |
| load = <CONFIG_SPL_TEXT_BASE>; |
| entry = <CONFIG_SPL_TEXT_BASE>; |
| blob { |
| filename = SPL_NODTB; |
| }; |
| }; |
| |
| fdt-1 { |
| description = "k3-j7200-common-proc-board"; |
| type = "flat_dt"; |
| arch = "arm"; |
| compression = "none"; |
| blob { |
| filename = SPL_J7200_EVM_DTB; |
| }; |
| }; |
| }; |
| |
| configurations { |
| default = "conf-1"; |
| |
| conf-1 { |
| description = "k3-j7200-common-proc-board"; |
| firmware = "atf"; |
| loadables = "tee", "dm", "spl"; |
| fdt = "fdt-1"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &binman { |
| u-boot_unsigned { |
| filename = "u-boot.img_unsigned"; |
| pad-byte = <0xff>; |
| |
| fit { |
| description = "FIT image with multiple configurations"; |
| |
| images { |
| uboot { |
| description = "U-Boot for J7200 board"; |
| type = "firmware"; |
| os = "u-boot"; |
| arch = "arm"; |
| compression = "none"; |
| load = <CONFIG_TEXT_BASE>; |
| blob { |
| filename = UBOOT_NODTB; |
| }; |
| hash { |
| algo = "crc32"; |
| }; |
| }; |
| |
| fdt-1 { |
| description = "k3-j7200-common-proc-board"; |
| type = "flat_dt"; |
| arch = "arm"; |
| compression = "none"; |
| blob { |
| filename = J7200_EVM_DTB; |
| }; |
| hash { |
| algo = "crc32"; |
| }; |
| }; |
| }; |
| |
| configurations { |
| default = "conf-1"; |
| |
| conf-1 { |
| description = "k3-j7200-common-proc-board"; |
| firmware = "uboot"; |
| loadables = "uboot"; |
| fdt = "fdt-1"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| #endif |