| /* |
| *========================================================================== |
| * |
| * xyzModem.c |
| * |
| * RedBoot stream handler for xyzModem protocol |
| * |
| *========================================================================== |
| *####ECOSGPLCOPYRIGHTBEGIN#### |
| * ------------------------------------------- |
| * This file is part of eCos, the Embedded Configurable Operating System. |
| * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
| * Copyright (C) 2002 Gary Thomas |
| * |
| * eCos is free software; you can redistribute it and/or modify it under |
| * the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 or (at your option) any later version. |
| * |
| * eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
| * WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with eCos; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| * |
| * As a special exception, if other files instantiate templates or use macros |
| * or inline functions from this file, or you compile this file and link it |
| * with other works to produce a work based on this file, this file does not |
| * by itself cause the resulting work to be covered by the GNU General Public |
| * License. However the source code for this file must still be made available |
| * in accordance with section (3) of the GNU General Public License. |
| * |
| * This exception does not invalidate any other reasons why a work based on |
| * this file might be covered by the GNU General Public License. |
| * |
| * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
| * at http: *sources.redhat.com/ecos/ecos-license/ |
| * ------------------------------------------- |
| *####ECOSGPLCOPYRIGHTEND#### |
| *========================================================================== |
| *#####DESCRIPTIONBEGIN#### |
| * |
| * Author(s): gthomas |
| * Contributors: gthomas, tsmith, Yoshinori Sato |
| * Date: 2000-07-14 |
| * Purpose: |
| * Description: |
| * |
| * This code is part of RedBoot (tm). |
| * |
| *####DESCRIPTIONEND#### |
| * |
| *========================================================================== |
| */ |
| #include <common.h> |
| #include <xyzModem.h> |
| #include <stdarg.h> |
| #include <crc.h> |
| |
| /* Assumption - run xyzModem protocol over the console port */ |
| |
| /* Values magic to the protocol */ |
| #define SOH 0x01 |
| #define STX 0x02 |
| #define EOT 0x04 |
| #define ACK 0x06 |
| #define BSP 0x08 |
| #define NAK 0x15 |
| #define CAN 0x18 |
| #define EOF 0x1A /* ^Z for DOS officionados */ |
| |
| #define USE_YMODEM_LENGTH |
| |
| /* Data & state local to the protocol */ |
| static struct { |
| #ifdef REDBOOT |
| hal_virtual_comm_table_t* __chan; |
| #else |
| int *__chan; |
| #endif |
| unsigned char pkt[1024], *bufp; |
| unsigned char blk,cblk,crc1,crc2; |
| unsigned char next_blk; /* Expected block */ |
| int len, mode, total_retries; |
| int total_SOH, total_STX, total_CAN; |
| bool crc_mode, at_eof, tx_ack; |
| #ifdef USE_YMODEM_LENGTH |
| unsigned long file_length, read_length; |
| #endif |
| } xyz; |
| |
| #define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */ |
| #define xyzModem_MAX_RETRIES 20 |
| #define xyzModem_MAX_RETRIES_WITH_CRC 10 |
| #define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */ |
| |
| |
| #ifndef REDBOOT /*SB */ |
| typedef int cyg_int32; |
| int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) { |
| #define DELAY 20 |
| unsigned long counter=0; |
| while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT*1000/DELAY)) { |
| udelay(DELAY); |
| counter++; |
| } |
| if (tstc()) { |
| *c=getc(); |
| return 1; |
| } |
| return 0; |
| } |
| |
| void CYGACC_COMM_IF_PUTC(char x,char y) { |
| putc(y); |
| } |
| |
| /* Validate a hex character */ |
| __inline__ static bool |
| _is_hex(char c) |
| { |
| return (((c >= '0') && (c <= '9')) || |
| ((c >= 'A') && (c <= 'F')) || |
| ((c >= 'a') && (c <= 'f'))); |
| } |
| |
| /* Convert a single hex nibble */ |
| __inline__ static int |
| _from_hex(char c) |
| { |
| int ret = 0; |
| |
| if ((c >= '0') && (c <= '9')) { |
| ret = (c - '0'); |
| } else if ((c >= 'a') && (c <= 'f')) { |
| ret = (c - 'a' + 0x0a); |
| } else if ((c >= 'A') && (c <= 'F')) { |
| ret = (c - 'A' + 0x0A); |
| } |
| return ret; |
| } |
| |
| /* Convert a character to lower case */ |
| __inline__ static char |
| _tolower(char c) |
| { |
| if ((c >= 'A') && (c <= 'Z')) { |
| c = (c - 'A') + 'a'; |
| } |
| return c; |
| } |
| |
| /* Parse (scan) a number */ |
| bool |
| parse_num(char *s, unsigned long *val, char **es, char *delim) |
| { |
| bool first = true; |
| int radix = 10; |
| char c; |
| unsigned long result = 0; |
| int digit; |
| |
| while (*s == ' ') s++; |
| while (*s) { |
| if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) { |
| radix = 16; |
| s += 2; |
| } |
| first = false; |
| c = *s++; |
| if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) { |
| /* Valid digit */ |
| #ifdef CYGPKG_HAL_MIPS |
| /* FIXME: tx49 compiler generates 0x2539018 for MUL which */ |
| /* isn't any good. */ |
| if (16 == radix) |
| result = result << 4; |
| else |
| result = 10 * result; |
| result += digit; |
| #else |
| result = (result * radix) + digit; |
| #endif |
| } else { |
| if (delim != (char *)0) { |
| /* See if this character is one of the delimiters */ |
| char *dp = delim; |
| while (*dp && (c != *dp)) dp++; |
| if (*dp) break; /* Found a good delimiter */ |
| } |
| return false; /* Malformatted number */ |
| } |
| } |
| *val = result; |
| if (es != (char **)0) { |
| *es = s; |
| } |
| return true; |
| } |
| |
| #endif |
| |
| #define USE_SPRINTF |
| #ifdef DEBUG |
| #ifndef USE_SPRINTF |
| /* |
| * Note: this debug setup only works if the target platform has two serial ports |
| * available so that the other one (currently only port 1) can be used for debug |
| * messages. |
| */ |
| static int |
| zm_dprintf(char *fmt, ...) |
| { |
| int cur_console; |
| va_list args; |
| |
| va_start(args, fmt); |
| #ifdef REDBOOT |
| cur_console = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); |
| CYGACC_CALL_IF_SET_CONSOLE_COMM(1); |
| #endif |
| diag_vprintf(fmt, args); |
| #ifdef REDBOOT |
| CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console); |
| #endif |
| } |
| |
| static void |
| zm_flush(void) |
| { |
| } |
| |
| #else |
| /* |
| * Note: this debug setup works by storing the strings in a fixed buffer |
| */ |
| #define FINAL |
| #ifdef FINAL |
| static char *zm_out = (char *)0x00380000; |
| static char *zm_out_start = (char *)0x00380000; |
| #else |
| static char zm_buf[8192]; |
| static char *zm_out=zm_buf; |
| static char *zm_out_start = zm_buf; |
| |
| #endif |
| static int |
| zm_dprintf(char *fmt, ...) |
| { |
| int len; |
| va_list args; |
| |
| va_start(args, fmt); |
| len = diag_vsprintf(zm_out, fmt, args); |
| zm_out += len; |
| return len; |
| } |
| |
| static void |
| zm_flush(void) |
| { |
| char *p = zm_out_start; |
| #ifdef REDBOOT |
| while (*p) mon_write_char(*p++); |
| #endif |
| zm_out = zm_out_start; |
| } |
| #endif |
| |
| static void |
| zm_dump_buf(void *buf, int len) |
| { |
| #ifdef REDBOOT |
| diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0); |
| #else |
| |
| #endif |
| } |
| |
| static unsigned char zm_buf[2048]; |
| static unsigned char *zm_bp; |
| |
| static void |
| zm_new(void) |
| { |
| zm_bp = zm_buf; |
| } |
| |
| static void |
| zm_save(unsigned char c) |
| { |
| *zm_bp++ = c; |
| } |
| |
| static void |
| zm_dump(int line) |
| { |
| zm_dprintf("Packet at line: %d\n", line); |
| zm_dump_buf(zm_buf, zm_bp-zm_buf); |
| } |
| |
| #define ZM_DEBUG(x) x |
| #else |
| #define ZM_DEBUG(x) |
| #endif |
| |
| /* Wait for the line to go idle */ |
| static void |
| xyzModem_flush(void) |
| { |
| int res; |
| char c; |
| while (true) { |
| res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); |
| if (!res) return; |
| } |
| } |
| |
| static int |
| xyzModem_get_hdr(void) |
| { |
| char c; |
| int res; |
| bool hdr_found = false; |
| int i, can_total, hdr_chars; |
| unsigned short cksum; |
| |
| ZM_DEBUG(zm_new()); |
| /* Find the start of a header */ |
| can_total = 0; |
| hdr_chars = 0; |
| |
| if (xyz.tx_ack) { |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); |
| xyz.tx_ack = false; |
| } |
| while (!hdr_found) { |
| res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); |
| ZM_DEBUG(zm_save(c)); |
| if (res) { |
| hdr_chars++; |
| switch (c) { |
| case SOH: |
| xyz.total_SOH++; |
| case STX: |
| if (c == STX) xyz.total_STX++; |
| hdr_found = true; |
| break; |
| case CAN: |
| xyz.total_CAN++; |
| ZM_DEBUG(zm_dump(__LINE__)); |
| if (++can_total == xyzModem_CAN_COUNT) { |
| return xyzModem_cancel; |
| } else { |
| /* Wait for multiple CAN to avoid early quits */ |
| break; |
| } |
| case EOT: |
| /* EOT only supported if no noise */ |
| if (hdr_chars == 1) { |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); |
| ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__)); |
| ZM_DEBUG(zm_dump(__LINE__)); |
| return xyzModem_eof; |
| } |
| default: |
| /* Ignore, waiting for start of header */ |
| ; |
| } |
| } else { |
| /* Data stream timed out */ |
| xyzModem_flush(); /* Toss any current input */ |
| ZM_DEBUG(zm_dump(__LINE__)); |
| CYGACC_CALL_IF_DELAY_US((cyg_int32)250000); |
| return xyzModem_timeout; |
| } |
| } |
| |
| /* Header found, now read the data */ |
| res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.blk); |
| ZM_DEBUG(zm_save(xyz.blk)); |
| if (!res) { |
| ZM_DEBUG(zm_dump(__LINE__)); |
| return xyzModem_timeout; |
| } |
| res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.cblk); |
| ZM_DEBUG(zm_save(xyz.cblk)); |
| if (!res) { |
| ZM_DEBUG(zm_dump(__LINE__)); |
| return xyzModem_timeout; |
| } |
| xyz.len = (c == SOH) ? 128 : 1024; |
| xyz.bufp = xyz.pkt; |
| for (i = 0; i < xyz.len; i++) { |
| res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); |
| ZM_DEBUG(zm_save(c)); |
| if (res) { |
| xyz.pkt[i] = c; |
| } else { |
| ZM_DEBUG(zm_dump(__LINE__)); |
| return xyzModem_timeout; |
| } |
| } |
| res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc1); |
| ZM_DEBUG(zm_save(xyz.crc1)); |
| if (!res) { |
| ZM_DEBUG(zm_dump(__LINE__)); |
| return xyzModem_timeout; |
| } |
| if (xyz.crc_mode) { |
| res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc2); |
| ZM_DEBUG(zm_save(xyz.crc2)); |
| if (!res) { |
| ZM_DEBUG(zm_dump(__LINE__)); |
| return xyzModem_timeout; |
| } |
| } |
| ZM_DEBUG(zm_dump(__LINE__)); |
| /* Validate the message */ |
| if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) { |
| ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk))); |
| ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len)); |
| xyzModem_flush(); |
| return xyzModem_frame; |
| } |
| /* Verify checksum/CRC */ |
| if (xyz.crc_mode) { |
| cksum = cyg_crc16(xyz.pkt, xyz.len); |
| if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) { |
| ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n", |
| xyz.crc1, xyz.crc2, cksum & 0xFFFF)); |
| return xyzModem_cksum; |
| } |
| } else { |
| cksum = 0; |
| for (i = 0; i < xyz.len; i++) { |
| cksum += xyz.pkt[i]; |
| } |
| if (xyz.crc1 != (cksum & 0xFF)) { |
| ZM_DEBUG(zm_dprintf("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, cksum & 0xFF)); |
| return xyzModem_cksum; |
| } |
| } |
| /* If we get here, the message passes [structural] muster */ |
| return 0; |
| } |
| |
| int |
| xyzModem_stream_open(connection_info_t *info, int *err) |
| { |
| int console_chan, stat=0; |
| int retries = xyzModem_MAX_RETRIES; |
| int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC; |
| |
| /* ZM_DEBUG(zm_out = zm_out_start); */ |
| #ifdef xyzModem_zmodem |
| if (info->mode == xyzModem_zmodem) { |
| *err = xyzModem_noZmodem; |
| return -1; |
| } |
| #endif |
| |
| #ifdef REDBOOT |
| /* Set up the I/O channel. Note: this allows for using a different port in the future */ |
| console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); |
| if (info->chan >= 0) { |
| CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan); |
| } else { |
| CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan); |
| } |
| xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS(); |
| |
| CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan); |
| CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT); |
| #else |
| /* TODO: CHECK ! */ |
| int dummy; |
| xyz.__chan=&dummy; |
| #endif |
| xyz.len = 0; |
| xyz.crc_mode = true; |
| xyz.at_eof = false; |
| xyz.tx_ack = false; |
| xyz.mode = info->mode; |
| xyz.total_retries = 0; |
| xyz.total_SOH = 0; |
| xyz.total_STX = 0; |
| xyz.total_CAN = 0; |
| #ifdef USE_YMODEM_LENGTH |
| xyz.read_length = 0; |
| xyz.file_length = 0; |
| #endif |
| |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); |
| |
| if (xyz.mode == xyzModem_xmodem) { |
| /* X-modem doesn't have an information header - exit here */ |
| xyz.next_blk = 1; |
| return 0; |
| } |
| |
| while (retries-- > 0) { |
| stat = xyzModem_get_hdr(); |
| if (stat == 0) { |
| /* Y-modem file information header */ |
| if (xyz.blk == 0) { |
| #ifdef USE_YMODEM_LENGTH |
| /* skip filename */ |
| while (*xyz.bufp++); |
| /* get the length */ |
| parse_num(xyz.bufp, &xyz.file_length, NULL, " "); |
| #endif |
| /* The rest of the file name data block quietly discarded */ |
| xyz.tx_ack = true; |
| } |
| xyz.next_blk = 1; |
| xyz.len = 0; |
| return 0; |
| } else |
| if (stat == xyzModem_timeout) { |
| if (--crc_retries <= 0) xyz.crc_mode = false; |
| CYGACC_CALL_IF_DELAY_US(5*100000); /* Extra delay for startup */ |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); |
| xyz.total_retries++; |
| ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__)); |
| } |
| if (stat == xyzModem_cancel) { |
| break; |
| } |
| } |
| *err = stat; |
| ZM_DEBUG(zm_flush()); |
| return -1; |
| } |
| |
| int |
| xyzModem_stream_read(char *buf, int size, int *err) |
| { |
| int stat, total, len; |
| int retries; |
| |
| total = 0; |
| stat = xyzModem_cancel; |
| /* Try and get 'size' bytes into the buffer */ |
| while (!xyz.at_eof && (size > 0)) { |
| if (xyz.len == 0) { |
| retries = xyzModem_MAX_RETRIES; |
| while (retries-- > 0) { |
| stat = xyzModem_get_hdr(); |
| if (stat == 0) { |
| if (xyz.blk == xyz.next_blk) { |
| xyz.tx_ack = true; |
| ZM_DEBUG(zm_dprintf("ACK block %d (%d)\n", xyz.blk, __LINE__)); |
| xyz.next_blk = (xyz.next_blk + 1) & 0xFF; |
| |
| #if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH) |
| if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) { |
| #else |
| if (1) { |
| #endif |
| /* Data blocks can be padded with ^Z (EOF) characters */ |
| /* This code tries to detect and remove them */ |
| if ((xyz.bufp[xyz.len-1] == EOF) && |
| (xyz.bufp[xyz.len-2] == EOF) && |
| (xyz.bufp[xyz.len-3] == EOF)) { |
| while (xyz.len && (xyz.bufp[xyz.len-1] == EOF)) { |
| xyz.len--; |
| } |
| } |
| } |
| |
| #ifdef USE_YMODEM_LENGTH |
| /* |
| * See if accumulated length exceeds that of the file. |
| * If so, reduce size (i.e., cut out pad bytes) |
| * Only do this for Y-modem (and Z-modem should it ever |
| * be supported since it can fall back to Y-modem mode). |
| */ |
| if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) { |
| xyz.read_length += xyz.len; |
| if (xyz.read_length > xyz.file_length) { |
| xyz.len -= (xyz.read_length - xyz.file_length); |
| } |
| } |
| #endif |
| break; |
| } else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) { |
| /* Just re-ACK this so sender will get on with it */ |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); |
| continue; /* Need new header */ |
| } else { |
| stat = xyzModem_sequence; |
| } |
| } |
| if (stat == xyzModem_cancel) { |
| break; |
| } |
| if (stat == xyzModem_eof) { |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); |
| ZM_DEBUG(zm_dprintf("ACK (%d)\n", __LINE__)); |
| if (xyz.mode == xyzModem_ymodem) { |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); |
| xyz.total_retries++; |
| ZM_DEBUG(zm_dprintf("Reading Final Header\n")); |
| stat = xyzModem_get_hdr(); |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); |
| ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__)); |
| } |
| xyz.at_eof = true; |
| break; |
| } |
| CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); |
| xyz.total_retries++; |
| ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__)); |
| } |
| if (stat < 0) { |
| *err = stat; |
| xyz.len = -1; |
| return total; |
| } |
| } |
| /* Don't "read" data from the EOF protocol package */ |
| if (!xyz.at_eof) { |
| len = xyz.len; |
| if (size < len) len = size; |
| memcpy(buf, xyz.bufp, len); |
| size -= len; |
| buf += len; |
| total += len; |
| xyz.len -= len; |
| xyz.bufp += len; |
| } |
| } |
| return total; |
| } |
| |
| void |
| xyzModem_stream_close(int *err) |
| { |
| diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n", |
| xyz.crc_mode ? "CRC" : "Cksum", |
| xyz.total_SOH, xyz.total_STX, xyz.total_CAN, |
| xyz.total_retries); |
| ZM_DEBUG(zm_flush()); |
| } |
| |
| /* Need to be able to clean out the input buffer, so have to take the */ |
| /* getc */ |
| void xyzModem_stream_terminate(bool abort, int (*getc)(void)) |
| { |
| int c; |
| |
| if (abort) { |
| ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n")); |
| switch (xyz.mode) { |
| case xyzModem_xmodem: |
| case xyzModem_ymodem: |
| /* The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal */ |
| /* number of Backspaces is a friendly way to get the other end to abort. */ |
| CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); |
| CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); |
| CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); |
| CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); |
| CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); |
| CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); |
| CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); |
| CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); |
| /* Now consume the rest of what's waiting on the line. */ |
| ZM_DEBUG(zm_dprintf("Flushing serial line.\n")); |
| xyzModem_flush(); |
| xyz.at_eof = true; |
| break; |
| #ifdef xyzModem_zmodem |
| case xyzModem_zmodem: |
| /* Might support it some day I suppose. */ |
| #endif |
| break; |
| } |
| } else { |
| ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n")); |
| /* |
| * Consume any trailing crap left in the inbuffer from |
| * previous recieved blocks. Since very few files are an exact multiple |
| * of the transfer block size, there will almost always be some gunk here. |
| * If we don't eat it now, RedBoot will think the user typed it. |
| */ |
| ZM_DEBUG(zm_dprintf("Trailing gunk:\n")); |
| while ((c = (*getc)()) > -1) ; |
| ZM_DEBUG(zm_dprintf("\n")); |
| /* |
| * Make a small delay to give terminal programs like minicom |
| * time to get control again after their file transfer program |
| * exits. |
| */ |
| CYGACC_CALL_IF_DELAY_US((cyg_int32)250000); |
| } |
| } |
| |
| char * |
| xyzModem_error(int err) |
| { |
| switch (err) { |
| case xyzModem_access: |
| return "Can't access file"; |
| break; |
| case xyzModem_noZmodem: |
| return "Sorry, zModem not available yet"; |
| break; |
| case xyzModem_timeout: |
| return "Timed out"; |
| break; |
| case xyzModem_eof: |
| return "End of file"; |
| break; |
| case xyzModem_cancel: |
| return "Cancelled"; |
| break; |
| case xyzModem_frame: |
| return "Invalid framing"; |
| break; |
| case xyzModem_cksum: |
| return "CRC/checksum error"; |
| break; |
| case xyzModem_sequence: |
| return "Block sequence error"; |
| break; |
| default: |
| return "Unknown error"; |
| break; |
| } |
| } |
| |
| /* |
| * RedBoot interface |
| */ |
| #if 0 /* SB */ |
| GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close, |
| xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error); |
| RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem); |
| RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem); |
| #endif |