| /* |
| * (C) Copyright 2003 |
| * Texas Instruments. |
| * Kshitij Gupta <kshitij@ti.com> |
| * Configuation settings for the TI OMAP Innovator board. |
| * |
| * (C) Copyright 2004 |
| * ARM Ltd. |
| * Philippe Robin, <philippe.robin@arm.com> |
| * Configuration for Integrator AP board. |
| *. |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include "integrator-common.h" |
| |
| /* Integrator/AP-specific configuration */ |
| #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ |
| |
| /* |
| * PL010 Configuration |
| */ |
| #define CONFIG_PL010_SERIAL |
| #define CONFIG_CONS_INDEX 0 |
| #define CONFIG_BAUDRATE 38400 |
| #define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) } |
| #define CONFIG_SYS_SERIAL0 0x16000000 |
| #define CONFIG_SYS_SERIAL1 0x17000000 |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_BOOTDELAY 2 |
| #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" |
| #define CONFIG_BOOTCOMMAND "" |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ |
| |
| /* Flash settings */ |
| #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 |
| #define CONFIG_ENV_IS_NOWHERE 1 |
| #define CONFIG_ENV_SIZE 32768 |
| |
| /*----------------------------------------------------------------------- |
| * PCI definitions |
| */ |
| |
| #define CONFIG_PCI |
| #define CONFIG_CMD_PCI |
| #define CONFIG_PCI_PNP |
| |
| #define CONFIG_TULIP |
| #define CONFIG_EEPRO100 |
| #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ |
| |
| |
| /*----------------------------------------------------------------------- |
| * There are various dependencies on the core module (CM) fitted |
| * Users should refer to their CM user guide |
| * - when porting adjust u-boot/Makefile accordingly |
| * to define the necessary CONFIG_ s for the CM involved |
| * see e.g. integratorcp_CM926EJ-S_config |
| */ |
| #include "armcoremodule.h" |
| |
| #endif /* __CONFIG_H */ |