ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
Device tree alignment with kernel v5.10-rc1.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/arch/arm/dts/stm32429i-eval-u-boot.dtsi b/arch/arm/dts/stm32429i-eval-u-boot.dtsi
index fe437bb..1e7429b 100644
--- a/arch/arm/dts/stm32429i-eval-u-boot.dtsi
+++ b/arch/arm/dts/stm32429i-eval-u-boot.dtsi
@@ -136,7 +136,7 @@
};
&pinctrl {
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
u-boot,dm-pre-reloc;
pins1 {
u-boot,dm-pre-reloc;
diff --git a/arch/arm/dts/stm32429i-eval.dts b/arch/arm/dts/stm32429i-eval.dts
index c5afa0c..592b182 100644
--- a/arch/arm/dts/stm32429i-eval.dts
+++ b/arch/arm/dts/stm32429i-eval.dts
@@ -19,7 +19,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@00000000 {
device_type = "memory";
reg = <0x00000000 0x2000000>;
};
@@ -54,19 +54,26 @@
regulator-max-microvolt = <3300000>;
};
+ vdd_panel: vdd-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_panel";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
leds {
compatible = "gpio-leds";
- green {
+ led-green {
gpios = <&gpiog 6 1>;
linux,default-trigger = "heartbeat";
};
- orange {
+ led-orange {
gpios = <&gpiog 7 1>;
};
- red {
+ led-red {
gpios = <&gpiog 10 1>;
};
- blue {
+ led-blue {
gpios = <&gpiog 12 1>;
};
};
@@ -97,6 +104,7 @@
panel_rgb: panel-rgb {
compatible = "ampire,am-480272h3tmqw-t01h";
+ power-supply = <&vdd_panel>;
status = "okay";
port {
panel_in_rgb: endpoint {
@@ -191,9 +199,8 @@
<dc {
status = "okay";
- pinctrl-0 = <<dc_pins>;
+ pinctrl-0 = <<dc_pins_a>;
pinctrl-names = "default";
- dma-ranges;
port {
ltdc_out_rgb: endpoint {
diff --git a/arch/arm/dts/stm32746g-eval-u-boot.dtsi b/arch/arm/dts/stm32746g-eval-u-boot.dtsi
index d5fb927..f2195a6 100644
--- a/arch/arm/dts/stm32746g-eval-u-boot.dtsi
+++ b/arch/arm/dts/stm32746g-eval-u-boot.dtsi
@@ -165,7 +165,7 @@
};
};
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
u-boot,dm-pre-reloc;
pins1 {
u-boot,dm-pre-reloc;
@@ -178,7 +178,7 @@
&qspi {
reg = <0xA0001000 0x1000>, <0x90000000 0x4000000>;
- qflash0: n25q512a {
+ qflash0: n25q512a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/dts/stm32746g-eval.dts b/arch/arm/dts/stm32746g-eval.dts
index d77eb53..9940cf1 100644
--- a/arch/arm/dts/stm32746g-eval.dts
+++ b/arch/arm/dts/stm32746g-eval.dts
@@ -19,7 +19,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x2000000>;
};
@@ -30,17 +30,17 @@
leds {
compatible = "gpio-leds";
- green {
+ led-green {
gpios = <&gpiof 10 1>;
linux,default-trigger = "heartbeat";
};
- orange {
+ led-orange {
gpios = <&stmfx_pinctrl 17 1>;
};
- red {
+ led-red {
gpios = <&gpiob 7 1>;
};
- blue {
+ led-blue {
gpios = <&stmfx_pinctrl 19 1>;
};
};
@@ -59,7 +59,6 @@
joystick {
compatible = "gpio-keys";
- #size-cells = <0>;
pinctrl-0 = <&joystick_pins>;
pinctrl-names = "default";
button-0 {
@@ -130,7 +129,7 @@
interrupts = <8 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gpioi>;
- stmfx_pinctrl: stmfx-pin-controller {
+ stmfx_pinctrl: pinctrl {
compatible = "st,stmfx-0300-pinctrl";
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/dts/stm32f4-pinctrl.dtsi b/arch/arm/dts/stm32f4-pinctrl.dtsi
index 7ed6828..adf5026 100644
--- a/arch/arm/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/dts/stm32f4-pinctrl.dtsi
@@ -127,7 +127,7 @@
st,bank-name = "GPIOK";
};
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -140,7 +140,7 @@
};
};
- usart3_pins_a: usart3@0 {
+ usart3_pins_a: usart3-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
bias-disable;
@@ -153,7 +153,7 @@
};
};
- usbotg_fs_pins_a: usbotg_fs@0 {
+ usbotg_fs_pins_a: usbotg-fs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -164,7 +164,7 @@
};
};
- usbotg_fs_pins_b: usbotg_fs@1 {
+ usbotg_fs_pins_b: usbotg-fs-1 {
pins {
pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
<STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
@@ -175,7 +175,7 @@
};
};
- usbotg_hs_pins_a: usbotg_hs@0 {
+ usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -195,7 +195,7 @@
};
};
- ethernet_mii: mii@0 {
+ ethernet_mii: mii-0 {
pins {
pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
<STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
@@ -215,13 +215,13 @@
};
};
- adc3_in8_pin: adc@200 {
+ adc3_in8_pin: adc-200 {
pins {
pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
};
};
- pwm1_pins: pwm@1 {
+ pwm1_pins: pwm1-0 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
<STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
@@ -229,14 +229,14 @@
};
};
- pwm3_pins: pwm@3 {
+ pwm3_pins: pwm3-0 {
pins {
pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
<STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
};
};
- i2c1_pins: i2c1@0 {
+ i2c1_pins: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
<STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
@@ -246,7 +246,7 @@
};
};
- ltdc_pins: ltdc@0 {
+ ltdc_pins_a: ltdc-0 {
pins {
pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
<STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
@@ -280,7 +280,86 @@
};
};
- dcmi_pins: dcmi@0 {
+ ltdc_pins_b: ltdc-1 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 6, AF14)>,
+ /* LCD_HSYNC */
+ <STM32_PINMUX('A', 4, AF14)>,
+ /* LCD_VSYNC */
+ <STM32_PINMUX('G', 7, AF14)>,
+ /* LCD_CLK */
+ <STM32_PINMUX('C', 10, AF14)>,
+ /* LCD_R2 */
+ <STM32_PINMUX('B', 0, AF9)>,
+ /* LCD_R3 */
+ <STM32_PINMUX('A', 11, AF14)>,
+ /* LCD_R4 */
+ <STM32_PINMUX('A', 12, AF14)>,
+ /* LCD_R5 */
+ <STM32_PINMUX('B', 1, AF9)>,
+ /* LCD_R6*/
+ <STM32_PINMUX('G', 6, AF14)>,
+ /* LCD_R7 */
+ <STM32_PINMUX('A', 6, AF14)>,
+ /* LCD_G2 */
+ <STM32_PINMUX('G', 10, AF9)>,
+ /* LCD_G3 */
+ <STM32_PINMUX('B', 10, AF14)>,
+ /* LCD_G4 */
+ <STM32_PINMUX('D', 6, AF14)>,
+ /* LCD_B2 */
+ <STM32_PINMUX('G', 11, AF14)>,
+ /* LCD_B3*/
+ <STM32_PINMUX('B', 11, AF14)>,
+ /* LCD_G5 */
+ <STM32_PINMUX('C', 7, AF14)>,
+ /* LCD_G6 */
+ <STM32_PINMUX('D', 3, AF14)>,
+ /* LCD_G7 */
+ <STM32_PINMUX('G', 12, AF9)>,
+ /* LCD_B4 */
+ <STM32_PINMUX('A', 3, AF14)>,
+ /* LCD_B5 */
+ <STM32_PINMUX('B', 8, AF14)>,
+ /* LCD_B6 */
+ <STM32_PINMUX('B', 9, AF14)>,
+ /* LCD_B7 */
+ <STM32_PINMUX('F', 10, AF14)>;
+ /* LCD_DE */
+ slew-rate = <2>;
+ };
+ };
+
+ spi5_pins: spi5-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 7, AF5)>,
+ /* SPI5_CLK */
+ <STM32_PINMUX('F', 9, AF5)>;
+ /* SPI5_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 8, AF5)>;
+ /* SPI5_MISO */
+ bias-disable;
+ };
+ };
+
+ i2c3_pins: i2c3-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 9, AF4)>,
+ /* I2C3_SDA */
+ <STM32_PINMUX('A', 8, AF4)>;
+ /* I2C3_SCL */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <3>;
+ };
+ };
+
+ dcmi_pins: dcmi-0 {
pins {
pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
<STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
@@ -303,7 +382,7 @@
};
};
- sdio_pins: sdio_pins@0 {
+ sdio_pins: sdio-pins-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
@@ -316,7 +395,7 @@
};
};
- sdio_pins_od: sdio_pins_od@0 {
+ sdio_pins_od: sdio-pins-od-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
diff --git a/arch/arm/dts/stm32f429-disco-u-boot.dtsi b/arch/arm/dts/stm32f429-disco-u-boot.dtsi
index 52f8032..77d5ea0 100644
--- a/arch/arm/dts/stm32f429-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f429-disco-u-boot.dtsi
@@ -123,7 +123,7 @@
};
&pinctrl {
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
u-boot,dm-pre-reloc;
pins1 {
u-boot,dm-pre-reloc;
diff --git a/arch/arm/dts/stm32f429-disco.dts b/arch/arm/dts/stm32f429-disco.dts
index 3a83ef5..42477c8 100644
--- a/arch/arm/dts/stm32f429-disco.dts
+++ b/arch/arm/dts/stm32f429-disco.dts
@@ -7,6 +7,8 @@
#include "stm32f429.dtsi"
#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "STMicroelectronics STM32F429i-DISCO board";
@@ -17,7 +19,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@90000000 {
device_type = "memory";
reg = <0x90000000 0x800000>;
};
@@ -28,10 +30,10 @@
leds {
compatible = "gpio-leds";
- red {
+ led-red {
gpios = <&gpiog 14 0>;
};
- green {
+ led-green {
gpios = <&gpiog 13 0>;
linux,default-trigger = "heartbeat";
};
@@ -66,12 +68,103 @@
status = "okay";
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ stmpe811@41 {
+ compatible = "st,stmpe811";
+ reg = <0x41>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpioa>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ /* forbid to use ADC channels 3-0 (touch) */
+ st,norequest-mask = <0x0F>;
+ };
+ };
+};
+
+<dc {
+ status = "okay";
+ pinctrl-0 = <<dc_pins_b>;
+ pinctrl-names = "default";
+
+ port {
+ ltdc_out_rgb: endpoint {
+ remote-endpoint = <&panel_in_rgb>;
+ };
+ };
+};
+
&rtc {
assigned-clocks = <&rcc 1 CLK_RTC>;
assigned-clock-parents = <&rcc 1 CLK_LSI>;
status = "okay";
};
+&spi5 {
+ status = "okay";
+ pinctrl-0 = <&spi5_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>, <&gpioc 2 GPIO_ACTIVE_LOW>;
+
+ l3gd20: l3gd20@0 {
+ compatible = "st,l3gd20-gyro";
+ spi-max-frequency = <10000000>;
+ st,drdy-int-pin = <2>;
+ interrupt-parent = <&gpioa>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>,
+ <2 IRQ_TYPE_EDGE_RISING>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ display: display@1{
+ /* Connect panel-ilitek-9341 to ltdc */
+ compatible = "st,sf-tc240t-9370-t";
+ reg = <1>;
+ spi-3wire;
+ spi-max-frequency = <10000000>;
+ dc-gpios = <&gpiod 13 0>;
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <<dc_out_rgb>;
+ };
+ };
+ };
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/dts/stm32f429.dtsi b/arch/arm/dts/stm32f429.dtsi
index db0b82e..a81e916 100644
--- a/arch/arm/dts/stm32f429.dtsi
+++ b/arch/arm/dts/stm32f429.dtsi
@@ -39,7 +39,7 @@
};
soc {
- romem: nvmem@1fff7800 {
+ romem: efuse@1fff7800 {
compatible = "st,stm32f4-otp";
reg = <0x1fff7800 0x400>;
#address-cells = <1>;
@@ -277,12 +277,10 @@
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
clocks = <&rcc 1 CLK_RTC>;
- clock-names = "ck_rtc";
assigned-clocks = <&rcc 1 CLK_RTC>;
assigned-clock-parents = <&rcc 1 CLK_LSE>;
interrupt-parent = <&exti>;
interrupts = <17 1>;
- interrupt-names = "alarm";
st,syscfg = <&pwrcfg 0x00 0x100>;
status = "disabled";
};
@@ -362,6 +360,18 @@
status = "disabled";
};
+ i2c3: i2c@40005c00 {
+ compatible = "st,stm32f4-i2c";
+ reg = <0x40005c00 0x400>;
+ interrupts = <72>,
+ <73>;
+ resets = <&rcc STM32F4_APB1_RESET(I2C3)>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
dac: dac@40007400 {
compatible = "st,stm32f4-dac-core";
reg = <0x40007400 0x400>;
@@ -374,14 +384,14 @@
dac1: dac@1 {
compatible = "st,stm32-dac";
- #io-channels-cells = <1>;
+ #io-channel-cells = <1>;
reg = <1>;
status = "disabled";
};
dac2: dac@2 {
compatible = "st,stm32-dac";
- #io-channels-cells = <1>;
+ #io-channel-cells = <1>;
reg = <2>;
status = "disabled";
};
@@ -546,8 +556,8 @@
status = "disabled";
};
- syscfg: system-config@40013800 {
- compatible = "syscon";
+ syscfg: syscon@40013800 {
+ compatible = "st,stm32-syscfg", "syscon";
reg = <0x40013800 0x400>;
};
@@ -620,6 +630,9 @@
reg = <0x40015000 0x400>;
interrupts = <85>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+ dmas = <&dma2 3 2 0x400 0x0>,
+ <&dma2 4 2 0x400 0x0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -634,7 +647,7 @@
};
pwrcfg: power-config@40007000 {
- compatible = "syscon";
+ compatible = "st,stm32-power-config", "syscon";
reg = <0x40007000 0x400>;
};
@@ -748,7 +761,6 @@
rng: rng@50060800 {
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
- interrupts = <80>;
clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
};
diff --git a/arch/arm/dts/stm32f469-disco-u-boot.dtsi b/arch/arm/dts/stm32f469-disco-u-boot.dtsi
index 5a89f13..3cf3a6a 100644
--- a/arch/arm/dts/stm32f469-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f469-disco-u-boot.dtsi
@@ -66,7 +66,7 @@
};
};
- qspi: quadspi@A0001000 {
+ qspi: spi@A0001000 {
compatible = "st,stm32f469-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -220,7 +220,7 @@
};
};
- usart3_pins_a: usart3@0 {
+ usart3_pins_a: usart3-0 {
u-boot,dm-pre-reloc;
pins1 {
u-boot,dm-pre-reloc;
@@ -245,7 +245,7 @@
&qspi {
reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>;
- flash0: n25q128a {
+ flash0: n25q128a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/dts/stm32f469-disco.dts b/arch/arm/dts/stm32f469-disco.dts
index d50c38d..23d87ee 100644
--- a/arch/arm/dts/stm32f469-disco.dts
+++ b/arch/arm/dts/stm32f469-disco.dts
@@ -19,7 +19,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@00000000 {
device_type = "memory";
reg = <0x00000000 0x1000000>;
};
@@ -35,23 +35,30 @@
regulator-max-microvolt = <3300000>;
};
+ vdd_dsi: vdd-dsi {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_dsi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
soc {
dma-ranges = <0xc0000000 0x0 0x10000000>;
};
leds {
compatible = "gpio-leds";
- green {
+ led-green {
gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
- orange {
+ led-orange {
gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
};
- red {
+ led-red {
gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
};
- blue {
+ led-blue {
gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
};
};
@@ -114,6 +121,7 @@
compatible = "orisetech,otm8009a";
reg = <0>; /* dsi virtual channel (0..3) */
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+ power-supply = <&vdd_dsi>;
status = "okay";
port {
@@ -125,7 +133,6 @@
};
<dc {
- dma-ranges;
status = "okay";
port {
diff --git a/arch/arm/dts/stm32f469.dtsi b/arch/arm/dts/stm32f469.dtsi
index 69c862d..5f6a797 100644
--- a/arch/arm/dts/stm32f469.dtsi
+++ b/arch/arm/dts/stm32f469.dtsi
@@ -8,7 +8,6 @@
dsi: dsi@40016c00 {
compatible = "st,stm32-dsi";
reg = <0x40016c00 0x800>;
- interrupts = <92>;
resets = <&rcc STM32F4_APB2_RESET(DSI)>;
reset-names = "apb";
clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
diff --git a/arch/arm/dts/stm32f7-pinctrl.dtsi b/arch/arm/dts/stm32f7-pinctrl.dtsi
index 9314128..fe4cfda 100644
--- a/arch/arm/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/dts/stm32f7-pinctrl.dtsi
@@ -127,7 +127,7 @@
st,bank-name = "GPIOK";
};
- cec_pins_a: cec@0 {
+ cec_pins_a: cec-0 {
pins {
pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
slew-rate = <0>;
@@ -136,7 +136,7 @@
};
};
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -149,7 +149,7 @@
};
};
- usart1_pins_b: usart1@1 {
+ usart1_pins_b: usart1-1 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -162,7 +162,7 @@
};
};
- i2c1_pins_b: i2c1@0 {
+ i2c1_pins_b: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
<STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
@@ -172,7 +172,7 @@
};
};
- usbotg_hs_pins_a: usbotg-hs@0 {
+ usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -192,7 +192,7 @@
};
};
- usbotg_hs_pins_b: usbotg-hs@1 {
+ usbotg_hs_pins_b: usbotg-hs-1 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
<STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -212,7 +212,7 @@
};
};
- usbotg_fs_pins_a: usbotg-fs@0 {
+ usbotg_fs_pins_a: usbotg-fs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -223,7 +223,7 @@
};
};
- sdio_pins_a: sdio_pins_a@0 {
+ sdio_pins_a: sdio-pins-a-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -236,7 +236,7 @@
};
};
- sdio_pins_od_a: sdio_pins_od_a@0 {
+ sdio_pins_od_a: sdio-pins-od-a-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -254,7 +254,7 @@
};
};
- sdio_pins_b: sdio_pins_b@0 {
+ sdio_pins_b: sdio-pins-b-0 {
pins {
pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
<STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
@@ -267,7 +267,7 @@
};
};
- sdio_pins_od_b: sdio_pins_od_b@0 {
+ sdio_pins_od_b: sdio-pins-od-b-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
<STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
diff --git a/arch/arm/dts/stm32f7-u-boot.dtsi b/arch/arm/dts/stm32f7-u-boot.dtsi
index 32613c9..46bd110 100644
--- a/arch/arm/dts/stm32f7-u-boot.dtsi
+++ b/arch/arm/dts/stm32f7-u-boot.dtsi
@@ -26,7 +26,6 @@
interrupt-names = "macirq", "eth_wake_irq";
snps,pbl = <8>;
snps,mixed-burst;
- dma-ranges;
pinctrl-0 = <ðernet_mii>;
phy-mode = "rmii";
phy-handle = <&phy0>;
@@ -43,7 +42,7 @@
};
};
- qspi: quadspi@A0001000 {
+ qspi: spi@A0001000 {
compatible = "st,stm32f469-qspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
index d8f9d8d..860dd77 100644
--- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
@@ -212,7 +212,7 @@
};
};
- usart1_pins_b: usart1@1 {
+ usart1_pins_b: usart1-1 {
u-boot,dm-pre-reloc;
pins1 {
u-boot,dm-pre-reloc;
@@ -229,7 +229,7 @@
&qspi {
reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>;
- qflash0: n25q128a {
+ qflash0: n25q128a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index 4fef016..9430dc0 100644
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -19,7 +19,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@c0000000 {
device_type = "memory";
reg = <0xC0000000 0x800000>;
};
diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index 3f312ab..ba9b3cd 100644
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -264,12 +264,10 @@
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
clocks = <&rcc 1 CLK_RTC>;
- clock-names = "ck_rtc";
assigned-clocks = <&rcc 1 CLK_RTC>;
assigned-clock-parents = <&rcc 1 CLK_LSE>;
interrupt-parent = <&exti>;
interrupts = <17 1>;
- interrupt-names = "alarm";
st,syscfg = <&pwrcfg 0x00 0x100>;
status = "disabled";
};
@@ -461,8 +459,8 @@
status = "disabled";
};
- syscfg: system-config@40013800 {
- compatible = "syscon";
+ syscfg: syscon@40013800 {
+ compatible = "st,stm32-syscfg", "syscon";
reg = <0x40013800 0x400>;
};
@@ -529,7 +527,7 @@
};
pwrcfg: power-config@40007000 {
- compatible = "syscon";
+ compatible = "st,stm32-power-config", "syscon";
reg = <0x40007000 0x400>;
};
@@ -551,7 +549,7 @@
assigned-clock-rates = <1000000>;
};
- dma1: dma@40026000 {
+ dma1: dma-controller@40026000 {
compatible = "st,stm32-dma";
reg = <0x40026000 0x400>;
interrupts = <11>,
@@ -567,7 +565,7 @@
status = "disabled";
};
- dma2: dma@40026400 {
+ dma2: dma-controller@40026400 {
compatible = "st,stm32-dma";
reg = <0x40026400 0x400>;
interrupts = <56>,
diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
index c1d7d6b..7dfe430 100644
--- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
@@ -215,7 +215,7 @@
};
};
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
u-boot,dm-pre-reloc;
pins1 {
u-boot,dm-pre-reloc;
@@ -228,7 +228,7 @@
&qspi {
reg = <0xA0001000 0x1000>, <0x90000000 0x4000000>;
- flash0: mx66l51235l {
+ flash0: mx66l51235l@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/dts/stm32f769-disco.dts b/arch/arm/dts/stm32f769-disco.dts
index 8d51e5b..03cfbd7 100644
--- a/arch/arm/dts/stm32f769-disco.dts
+++ b/arch/arm/dts/stm32f769-disco.dts
@@ -19,7 +19,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@c0000000 {
device_type = "memory";
reg = <0xC0000000 0x1000000>;
};
@@ -30,11 +30,11 @@
leds {
compatible = "gpio-leds";
- green {
+ led-green {
gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- red {
+ led-red {
gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/dts/stm32h743-pinctrl.dtsi b/arch/arm/dts/stm32h743-pinctrl.dtsi
index e3a5c53..141083f 100644
--- a/arch/arm/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/dts/stm32h743-pinctrl.dtsi
@@ -163,7 +163,7 @@
#interrupt-cells = <2>;
};
- i2c1_pins_a: i2c1@0 {
+ i2c1_pins_a: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
<STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
@@ -173,7 +173,7 @@
};
};
- ethernet_rmii: rmii@0 {
+ ethernet_rmii: rmii-0 {
pins {
pinmux = <STM32_PINMUX('G', 11, AF11)>,
<STM32_PINMUX('G', 13, AF11)>,
@@ -256,7 +256,7 @@
};
};
- usart1_pins: usart1@0 {
+ usart1_pins: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
bias-disable;
@@ -269,7 +269,7 @@
};
};
- usart2_pins: usart2@0 {
+ usart2_pins: usart2-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
bias-disable;
@@ -282,7 +282,7 @@
};
};
- usbotg_hs_pins_a: usbotg-hs@0 {
+ usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
<STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
index 4b4e7a9..e4e4723 100644
--- a/arch/arm/dts/stm32h743.dtsi
+++ b/arch/arm/dts/stm32h743.dtsi
@@ -74,6 +74,7 @@
compatible = "st,stm32h7-spi";
reg = <0x40003800 0x400>;
interrupts = <36>;
+ resets = <&rcc STM32H7_APB1L_RESET(SPI2)>;
clocks = <&rcc SPI2_CK>;
status = "disabled";
@@ -85,12 +86,13 @@
compatible = "st,stm32h7-spi";
reg = <0x40003c00 0x400>;
interrupts = <51>;
+ resets = <&rcc STM32H7_APB1L_RESET(SPI3)>;
clocks = <&rcc SPI3_CK>;
status = "disabled";
};
usart2: serial@40004400 {
- compatible = "st,stm32f7-uart";
+ compatible = "st,stm32h7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
status = "disabled";
@@ -144,21 +146,21 @@
dac1: dac@1 {
compatible = "st,stm32-dac";
- #io-channels-cells = <1>;
+ #io-channel-cells = <1>;
reg = <1>;
status = "disabled";
};
dac2: dac@2 {
compatible = "st,stm32-dac";
- #io-channels-cells = <1>;
+ #io-channel-cells = <1>;
reg = <2>;
status = "disabled";
};
};
usart1: serial@40011000 {
- compatible = "st,stm32f7-uart";
+ compatible = "st,stm32h7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
status = "disabled";
@@ -171,6 +173,7 @@
compatible = "st,stm32h7-spi";
reg = <0x40013000 0x400>;
interrupts = <35>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI1)>;
clocks = <&rcc SPI1_CK>;
status = "disabled";
};
@@ -181,6 +184,7 @@
compatible = "st,stm32h7-spi";
reg = <0x40013400 0x400>;
interrupts = <84>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI4)>;
clocks = <&rcc SPI4_CK>;
status = "disabled";
};
@@ -191,11 +195,12 @@
compatible = "st,stm32h7-spi";
reg = <0x40015000 0x400>;
interrupts = <85>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI5)>;
clocks = <&rcc SPI5_CK>;
status = "disabled";
};
- dma1: dma@40020000 {
+ dma1: dma-controller@40020000 {
compatible = "st,stm32-dma";
reg = <0x40020000 0x400>;
interrupts = <11>,
@@ -213,7 +218,7 @@
status = "disabled";
};
- dma2: dma@40020400 {
+ dma2: dma-controller@40020400 {
compatible = "st,stm32-dma";
reg = <0x40020400 0x400>;
interrupts = <56>,
@@ -293,7 +298,17 @@
status = "disabled";
};
- mdma1: dma@52000000 {
+ ltdc: display-controller@50001000 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x50001000 0x200>;
+ interrupts = <88>, <89>;
+ resets = <&rcc STM32H7_APB3_RESET(LTDC)>;
+ clocks = <&rcc LTDC_CK>;
+ clock-names = "lcd";
+ status = "disabled";
+ };
+
+ mdma1: dma-controller@52000000 {
compatible = "st,stm32h7-mdma";
reg = <0x52000000 0x1000>;
interrupts = <122>;
@@ -325,8 +340,8 @@
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>;
};
- syscfg: system-config@58000400 {
- compatible = "syscon";
+ syscfg: syscon@58000400 {
+ compatible = "st,stm32-syscfg", "syscon";
reg = <0x58000400 0x400>;
};
@@ -336,6 +351,7 @@
compatible = "st,stm32h7-spi";
reg = <0x58001400 0x400>;
interrupts = <86>;
+ resets = <&rcc STM32H7_APB4_RESET(SPI6)>;
clocks = <&rcc SPI6_CK>;
status = "disabled";
};
@@ -451,7 +467,6 @@
assigned-clock-parents = <&rcc LSE_CK>;
interrupt-parent = <&exti>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "alarm";
st,syscfg = <&pwrcfg 0x00 0x100>;
status = "disabled";
};
@@ -466,7 +481,7 @@
};
pwrcfg: power-config@58024800 {
- compatible = "syscon";
+ compatible = "st,stm32-power-config", "syscon";
reg = <0x58024800 0x400>;
};
diff --git a/arch/arm/dts/stm32h743i-disco.dts b/arch/arm/dts/stm32h743i-disco.dts
index 43c30bf..8100716 100644
--- a/arch/arm/dts/stm32h743i-disco.dts
+++ b/arch/arm/dts/stm32h743i-disco.dts
@@ -17,7 +17,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@d0000000 {
device_type = "memory";
reg = <0xd0000000 0x2000000>;
};
diff --git a/arch/arm/dts/stm32h743i-eval.dts b/arch/arm/dts/stm32h743i-eval.dts
index e4d3c58..8f39817 100644
--- a/arch/arm/dts/stm32h743i-eval.dts
+++ b/arch/arm/dts/stm32h743i-eval.dts
@@ -53,7 +53,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@d0000000 {
device_type = "memory";
reg = <0xd0000000 0x2000000>;
};