include/configs/eb_cpu5282.h - platform/external/u-boot - Gitiles

 /*
  * Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
  *
  * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef _CONFIG_EB_CPU5282_H_
 #define _CONFIG_EB_CPU5282_H_

 #undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP

 /*----------------------------------------------------------------------*
  * High Level Configuration Options (easy to change)                    *
  *----------------------------------------------------------------------*/

 #define CONFIG_MISC_INIT_R

 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE			115200

 #undef	CONFIG_MONITOR_IS_IN_RAM		/* starts uboot direct */

 #define CONFIG_BOOTCOMMAND "printenv"

 /*----------------------------------------------------------------------*
  * Options								*
  *----------------------------------------------------------------------*/

 #define CONFIG_BOOT_RETRY_TIME	-1
 #define CONFIG_RESET_TO_RETRY
 #define CONFIG_SPLASH_SCREEN

 #define CONFIG_HW_WATCHDOG

 #define CONFIG_STATUS_LED
 #define CONFIG_BOARD_SPECIFIC_LED
 #define STATUS_LED_ACTIVE		0
 #define STATUS_LED_BIT			0x0008	/* Timer7 GPIO */
 #define STATUS_LED_BOOT			0
 #define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE		STATUS_LED_OFF

 /*----------------------------------------------------------------------*
  * Configuration for environment					*
  * Environment is in the second sector of the first 256k of flash	*
  *----------------------------------------------------------------------*/

 #define CONFIG_ENV_ADDR		0xFF040000
 #define CONFIG_ENV_SECT_SIZE	0x00020000
 #define CONFIG_ENV_IS_IN_FLASH	1

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

 /*
  * Command line configuration.
  */
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_LED
 #define CONFIG_CMD_MII

 #define CONFIG_MCFTMR

 #define CONFIG_BOOTDELAY	5
 #define	CONFIG_SYS_LONGHELP	1

 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size	*/
 #define	CONFIG_SYS_PBSIZE 	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define	CONFIG_SYS_MAXARGS	16	/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE

 #define CONFIG_SYS_LOAD_ADDR		0x20000

 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		0x400000
 /*#define CONFIG_SYS_DRAM_TEST		1 */
 #undef CONFIG_SYS_DRAM_TEST

 /*----------------------------------------------------------------------*
  * Clock and PLL Configuration						*
  *----------------------------------------------------------------------*/
 #define	CONFIG_SYS_CLK			80000000      /* 8MHz * 8 */

 /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */

 #define CONFIG_SYS_MFD		0x02	/* PLL Multiplication Factor Devider */
 #define CONFIG_SYS_RFD		0x00	/* PLL Reduce Frecuency Devider */

 /*----------------------------------------------------------------------*
  * Network								*
  *----------------------------------------------------------------------*/

 #define CONFIG_MCFFEC
 #define CONFIG_MII			1
 #define CONFIG_MII_INIT			1
 #define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_SYS_RX_ETH_BUFFER	8
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN

 #define CONFIG_SYS_FEC0_PINMUX		0
 #define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #define MCFFEC_TOUT_LOOP		50000

 #define CONFIG_OVERWRITE_ETHADDR_ONCE

 /*-------------------------------------------------------------------------
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  *-----------------------------------------------------------------------*/

 #define	CONFIG_SYS_MBAR			0x40000000

 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  *-----------------------------------------------------------------------*/

 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x10000
 #define CONFIG_SYS_GBL_DATA_OFFSET	\
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
 #define CONFIG_SYS_SDRAM_BASE0		0x00000000
 #define	CONFIG_SYS_SDRAM_SIZE0		16	/* SDRAM size in MB */

 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE0
 #define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE0

 #define CONFIG_SYS_MONITOR_LEN		0x20000
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
 #define	CONFIG_SYS_BOOTMAPSZ	(8 << 20) /* Initial Memory map for Linux */

 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define CONFIG_FLASH_SHOW_PROGRESS	45

 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define	CONFIG_SYS_INT_FLASH_BASE	0xF0000000
 #define CONFIG_SYS_INT_FLASH_ENABLE	0x21

 #define	CONFIG_SYS_MAX_FLASH_SECT	128
 #define	CONFIG_SYS_MAX_FLASH_BANKS	1
 #define	CONFIG_SYS_FLASH_ERASE_TOUT	10000000
 #define	CONFIG_SYS_FLASH_PROTECTION

 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_SIZE		16*1024*1024
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT

 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }

 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16

 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)
 #define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 4)
 #define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV + CF_CACR_DCM)
 #define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
 					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 					 CF_ACR_EN | CF_ACR_SM_ALL)
 #define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_DISD | \
 					 CF_CACR_CEIB | CF_CACR_DBWE | \
 					 CF_CACR_EUSP)

 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */

 #define CONFIG_SYS_CS0_BASE		0xFF000000
 #define CONFIG_SYS_CS0_CTRL		0x00001980
 #define CONFIG_SYS_CS0_MASK		0x00FF0001

 #define CONFIG_SYS_CS2_BASE		0xE0000000
 #define CONFIG_SYS_CS2_CTRL		0x00001980
 #define CONFIG_SYS_CS2_MASK		0x000F0001

 #define CONFIG_SYS_CS3_BASE		0xE0100000
 #define CONFIG_SYS_CS3_CTRL		0x00001980
 #define CONFIG_SYS_CS3_MASK		0x000F0001

 /*-----------------------------------------------------------------------
  * Port configuration
  */
 #define CONFIG_SYS_PACNT		0x0000000	/* Port A D[31:24] */
 #define CONFIG_SYS_PADDR		0x0000000
 #define CONFIG_SYS_PADAT		0x0000000

 #define CONFIG_SYS_PBCNT		0x0000000	/* Port B D[23:16] */
 #define CONFIG_SYS_PBDDR		0x0000000
 #define CONFIG_SYS_PBDAT		0x0000000

 #define CONFIG_SYS_PCCNT		0x0000000	/* Port C D[15:08] */
 #define CONFIG_SYS_PCDDR		0x0000000
 #define CONFIG_SYS_PCDAT		0x0000000

 #define CONFIG_SYS_PDCNT		0x0000000	/* Port D D[07:00] */
 #define CONFIG_SYS_PCDDR		0x0000000
 #define CONFIG_SYS_PCDAT		0x0000000

 #define CONFIG_SYS_PASPAR		0x0F0F
 #define CONFIG_SYS_PEHLPAR		0xC0
 #define CONFIG_SYS_PUAPAR		0x0F
 #define CONFIG_SYS_DDRUA		0x05
 #define CONFIG_SYS_PJPAR		0xFF

 /*-----------------------------------------------------------------------
  * I2C
  */

 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL

 #define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR

 #define CONFIG_SYS_FSL_I2C_SPEED	100000
 #define CONFIG_SYS_FSL_I2C_SLAVE	0

 #ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1338
 #define CONFIG_I2C_RTC_ADDR		0x68
 #endif

 /*-----------------------------------------------------------------------
  * VIDEO configuration
  */

 #define CONFIG_VIDEO

 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_VCXK			1

 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN	2
 #define	CONFIG_SYS_VCXK_DOUBLEBUFFERED		1
 #define CONFIG_SYS_VCXK_BASE			CONFIG_SYS_CS2_BASE

 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT	MCFGPTB_GPTPORT
 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR		MCFGPTB_GPTDDR
 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN		0x0001

 #define CONFIG_SYS_VCXK_ENABLE_PORT		MCFGPTB_GPTPORT
 #define CONFIG_SYS_VCXK_ENABLE_DDR		MCFGPTB_GPTDDR
 #define CONFIG_SYS_VCXK_ENABLE_PIN		0x0002

 #define CONFIG_SYS_VCXK_REQUEST_PORT		MCFGPTB_GPTPORT
 #define CONFIG_SYS_VCXK_REQUEST_DDR		MCFGPTB_GPTDDR
 #define CONFIG_SYS_VCXK_REQUEST_PIN		0x0004

 #define CONFIG_SYS_VCXK_INVERT_PORT		MCFGPIO_PORTE
 #define CONFIG_SYS_VCXK_INVERT_DDR		MCFGPIO_DDRE
 #define CONFIG_SYS_VCXK_INVERT_PIN		MCFGPIO_PORT2

 #endif /* CONFIG_VIDEO */
 #endif	/* _CONFIG_M5282EVB_H */
 /*---------------------------------------------------------------------*/
	/*
	* Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
	*
	* (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef _CONFIG_EB_CPU5282_H_
	#define _CONFIG_EB_CPU5282_H_

	#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP

	/----------------------------------------------------------------------
	* High Level Configuration Options (easy to change) *
	----------------------------------------------------------------------/

	#define CONFIG_MISC_INIT_R

	#define CONFIG_MCFUART
	#define CONFIG_SYS_UART_PORT (0)
	#define CONFIG_BAUDRATE 115200

	#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */

	#define CONFIG_BOOTCOMMAND "printenv"

	/----------------------------------------------------------------------
	* Options *
	----------------------------------------------------------------------/

	#define CONFIG_BOOT_RETRY_TIME -1
	#define CONFIG_RESET_TO_RETRY
	#define CONFIG_SPLASH_SCREEN

	#define CONFIG_HW_WATCHDOG

	#define CONFIG_STATUS_LED
	#define CONFIG_BOARD_SPECIFIC_LED
	#define STATUS_LED_ACTIVE 0
	#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */
	#define STATUS_LED_BOOT 0
	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
	#define STATUS_LED_STATE STATUS_LED_OFF

	/----------------------------------------------------------------------
	* Configuration for environment *
	* Environment is in the second sector of the first 256k of flash *
	----------------------------------------------------------------------/

	#define CONFIG_ENV_ADDR 0xFF040000
	#define CONFIG_ENV_SECT_SIZE 0x00020000
	#define CONFIG_ENV_IS_IN_FLASH 1

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME

	/*
	* Command line configuration.
	*/
	#define CONFIG_CMDLINE_EDITING
	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_LED
	#define CONFIG_CMD_MII

	#define CONFIG_MCFTMR

	#define CONFIG_BOOTDELAY 5
	#define CONFIG_SYS_LONGHELP 1

	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	#define CONFIG_SYS_LOAD_ADDR 0x20000

	#define CONFIG_SYS_MEMTEST_START 0x100000
	#define CONFIG_SYS_MEMTEST_END 0x400000
	/#define CONFIG_SYS_DRAM_TEST 1 /
	#undef CONFIG_SYS_DRAM_TEST

	/----------------------------------------------------------------------
	* Clock and PLL Configuration *
	----------------------------------------------------------------------/
	#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */

	/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */

	#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
	#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */

	/----------------------------------------------------------------------
	* Network *
	----------------------------------------------------------------------/

	#define CONFIG_MCFFEC
	#define CONFIG_MII 1
	#define CONFIG_MII_INIT 1
	#define CONFIG_SYS_DISCOVER_PHY
	#define CONFIG_SYS_RX_ETH_BUFFER 8
	#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN

	#define CONFIG_SYS_FEC0_PINMUX 0
	#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
	#define MCFFEC_TOUT_LOOP 50000

	#define CONFIG_OVERWRITE_ETHADDR_ONCE

	/*-------------------------------------------------------------------------
	* Low Level Configuration Settings
	* (address mappings, register initial values, etc.)
	* You should know what you are doing if you make changes here.
	-----------------------------------------------------------------------/

	#define CONFIG_SYS_MBAR 0x40000000

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area (in DPRAM)
	-----------------------------------------------------------------------/

	#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
	#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
	#define CONFIG_SYS_GBL_DATA_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
	*/
	#define CONFIG_SYS_SDRAM_BASE0 0x00000000
	#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */

	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
	#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0

	#define CONFIG_SYS_MONITOR_LEN 0x20000
	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
	#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization ??
	*/
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CONFIG_FLASH_SHOW_PROGRESS 45

	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
	#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
	#define CONFIG_SYS_INT_FLASH_ENABLE 0x21

	#define CONFIG_SYS_MAX_FLASH_SECT 128
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
	#define CONFIG_SYS_FLASH_PROTECTION

	#define CONFIG_SYS_FLASH_CFI
	#define CONFIG_FLASH_CFI_DRIVER
	#define CONFIG_SYS_FLASH_SIZE 1610241024
	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT

	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }

	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CONFIG_SYS_CACHELINE_SIZE 16

	#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
	CONFIG_SYS_INIT_RAM_SIZE - 8)
	#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
	CONFIG_SYS_INIT_RAM_SIZE - 4)
	#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
	#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE \| \
	CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) \| \
	CF_ACR_EN \| CF_ACR_SM_ALL)
	#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB \| CF_CACR_DISD \| \
	CF_CACR_CEIB \| CF_CACR_DBWE \| \
	CF_CACR_EUSP)

	/*-----------------------------------------------------------------------
	* Memory bank definitions
	*/

	#define CONFIG_SYS_CS0_BASE 0xFF000000
	#define CONFIG_SYS_CS0_CTRL 0x00001980
	#define CONFIG_SYS_CS0_MASK 0x00FF0001

	#define CONFIG_SYS_CS2_BASE 0xE0000000
	#define CONFIG_SYS_CS2_CTRL 0x00001980
	#define CONFIG_SYS_CS2_MASK 0x000F0001

	#define CONFIG_SYS_CS3_BASE 0xE0100000
	#define CONFIG_SYS_CS3_CTRL 0x00001980
	#define CONFIG_SYS_CS3_MASK 0x000F0001

	/*-----------------------------------------------------------------------
	* Port configuration
	*/
	#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
	#define CONFIG_SYS_PADDR 0x0000000
	#define CONFIG_SYS_PADAT 0x0000000

	#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
	#define CONFIG_SYS_PBDDR 0x0000000
	#define CONFIG_SYS_PBDAT 0x0000000

	#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
	#define CONFIG_SYS_PCDDR 0x0000000
	#define CONFIG_SYS_PCDAT 0x0000000

	#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
	#define CONFIG_SYS_PCDDR 0x0000000
	#define CONFIG_SYS_PCDAT 0x0000000

	#define CONFIG_SYS_PASPAR 0x0F0F
	#define CONFIG_SYS_PEHLPAR 0xC0
	#define CONFIG_SYS_PUAPAR 0x0F
	#define CONFIG_SYS_DDRUA 0x05
	#define CONFIG_SYS_PJPAR 0xFF

	/*-----------------------------------------------------------------------
	* I2C
	*/

	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_FSL

	#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300
	#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR

	#define CONFIG_SYS_FSL_I2C_SPEED 100000
	#define CONFIG_SYS_FSL_I2C_SLAVE 0

	#ifdef CONFIG_CMD_DATE
	#define CONFIG_RTC_DS1338
	#define CONFIG_I2C_RTC_ADDR 0x68
	#endif

	/*-----------------------------------------------------------------------
	* VIDEO configuration
	*/

	#define CONFIG_VIDEO

	#ifdef CONFIG_VIDEO
	#define CONFIG_VIDEO_VCXK 1

	#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
	#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
	#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE

	#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
	#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
	#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001

	#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT
	#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR
	#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002

	#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT
	#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR
	#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004

	#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE
	#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE
	#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2

	#endif /* CONFIG_VIDEO */
	#endif /* _CONFIG_M5282EVB_H */
	/---------------------------------------------------------------------/