Various, unrelated tree-wide typo fixes.
Fix a number of typos, including:
* "compatble" -> "compatible"
* "eanbeld" -> "enabled"
* "envrionment" -> "environment"
* "FTD" -> "FDT" (for "flattened device tree")
* "ommitted" -> "omitted"
* "overriden" -> "overridden"
* "partiton" -> "partition"
* "propogate" -> "propagate"
* "resourse" -> "resource"
* "rest in piece" -> "rest in peace"
* "suport" -> "support"
* "varible" -> "variable"
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index afeaac8..bd6108e 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -21,7 +21,7 @@
Say Y here to boot in secure mode by default even if non-secure mode
is supported. This option is useful to boot kernels which do not
suppport booting in non-secure mode. Only set this if you need it.
- This can be overriden at run-time by setting the bootm_boot_mode env.
+ This can be overridden at run-time by setting the bootm_boot_mode env.
variable to "sec" or "nonsec".
config ARMV7_VIRT
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
index da5e052..7867c37 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
@@ -128,7 +128,7 @@
during U-boot booting.However the MC, DPC and DPL can be applied from
console independently.
The variable needs to be set from the console once and then on
- rebooting the parameters set in the varible will automatically be
+ rebooting the parameters set in the variable will automatically be
executed. The commmand is demostrated taking an example of mc boot
using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash:
diff --git a/arch/arm/cpu/armv8/zynqmp/mp.c b/arch/arm/cpu/armv8/zynqmp/mp.c
index 58312a7..e10fc31 100644
--- a/arch/arm/cpu/armv8/zynqmp/mp.c
+++ b/arch/arm/cpu/armv8/zynqmp/mp.c
@@ -128,7 +128,7 @@
writel(tmp, &crlapb_base->cpu_r5_ctrl);
/* Give some delay for clock
- * to propogate */
+ * to propagate */
udelay(0x500);
}