| config VIDEO_BRIDGE |
| bool "Support video bridges" |
| depends on DM |
| help |
| Some platforms use video bridges to convert from one output to |
| another. For example, where the SoC only supports eDP and the LCD |
| requires LVDS, an eDP->LVDS bridge chip can be used to provide the |
| necessary conversion. This option enables support for these devices. |
| |
| config VIDEO_BRIDGE_PARADE_PS862X |
| bool "Support Parade PS862X DP->LVDS bridge" |
| depends on VIDEO_BRIDGE |
| help |
| The Parade PS8622 and PS8625 are DisplayPort-to-LVDS (Low voltage |
| differential signalling) converters. They enable an LVDS LCD panel |
| to be connected to an eDP output device such as an SoC that lacks |
| LVDS capability, or where LVDS requires too many signals to route |
| on the PCB. Setup parameters are provided in the device tree. |
| |
| config VIDEO_BRIDGE_NXP_PTN3460 |
| bool "Support NXP PTN3460 DP->LVDS bridge" |
| depends on VIDEO_BRIDGE |
| help |
| The NXP PTN3460 is a DisplayPort-to-LVDS (Low voltage differential |
| signalling) converter. It enables an LVDS LCD panel to be connected |
| to an eDP output device such as an SoC that lacks LVDS capability, |
| or where LVDS requires too many signals to route on the PCB. |
| |
| config VIDEO_BRIDGE_ANALOGIX_ANX6345 |
| bool "Support Analogix ANX6345 RGB->DP bridge" |
| depends on VIDEO_BRIDGE |
| select DM_I2C |
| help |
| The Analogix ANX6345 is RGB-to-DP converter. It enables an eDP LCD |
| panel to be connected to an parallel LCD interface. |
| |
| config VIDEO_BRIDGE_SOLOMON_SSD2825 |
| bool "Solomon SSD2825 bridge driver" |
| depends on PANEL && DM_GPIO |
| select VIDEO_MIPI_DSI |
| help |
| Solomon SSD2824 SPI RGB-DSI bridge driver wrapped into panel uClass. |