| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Address map functions for Marvell EBU SoCs (Kirkwood, Armada |
| * 370/XP, Dove, Orion5x and MV78xx0) |
| * |
| * Ported from the Barebox version to U-Boot by: |
| * Stefan Roese <sr@denx.de> |
| * |
| * The Barebox version is: |
| * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> |
| * |
| * based on mbus driver from Linux |
| * (C) Copyright 2008 Marvell Semiconductor |
| * |
| * The Marvell EBU SoCs have a configurable physical address space: |
| * the physical address at which certain devices (PCIe, NOR, NAND, |
| * etc.) sit can be configured. The configuration takes place through |
| * two sets of registers: |
| * |
| * - One to configure the access of the CPU to the devices. Depending |
| * on the families, there are between 8 and 20 configurable windows, |
| * each can be use to create a physical memory window that maps to a |
| * specific device. Devices are identified by a tuple (target, |
| * attribute). |
| * |
| * - One to configure the access to the CPU to the SDRAM. There are |
| * either 2 (for Dove) or 4 (for other families) windows to map the |
| * SDRAM into the physical address space. |
| * |
| * This driver: |
| * |
| * - Reads out the SDRAM address decoding windows at initialization |
| * time, and fills the mbus_dram_info structure with these |
| * informations. The exported function mv_mbus_dram_info() allow |
| * device drivers to get those informations related to the SDRAM |
| * address decoding windows. This is because devices also have their |
| * own windows (configured through registers that are part of each |
| * device register space), and therefore the drivers for Marvell |
| * devices have to configure those device -> SDRAM windows to ensure |
| * that DMA works properly. |
| * |
| * - Provides an API for platform code or device drivers to |
| * dynamically add or remove address decoding windows for the CPU -> |
| * device accesses. This API is mvebu_mbus_add_window_by_id(), |
| * mvebu_mbus_add_window_remap_by_id() and |
| * mvebu_mbus_del_window(). |
| */ |
| |
| #include <common.h> |
| #include <linux/errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/soc.h> |
| #include <linux/log2.h> |
| #include <linux/mbus.h> |
| |
| /* DDR target is the same on all platforms */ |
| #define TARGET_DDR 0 |
| |
| /* CPU Address Decode Windows registers */ |
| #define WIN_CTRL_OFF 0x0000 |
| #define WIN_CTRL_ENABLE BIT(0) |
| #define WIN_CTRL_TGT_MASK 0xf0 |
| #define WIN_CTRL_TGT_SHIFT 4 |
| #define WIN_CTRL_ATTR_MASK 0xff00 |
| #define WIN_CTRL_ATTR_SHIFT 8 |
| #define WIN_CTRL_SIZE_MASK 0xffff0000 |
| #define WIN_CTRL_SIZE_SHIFT 16 |
| #define WIN_BASE_OFF 0x0004 |
| #define WIN_BASE_LOW 0xffff0000 |
| #define WIN_BASE_HIGH 0xf |
| #define WIN_REMAP_LO_OFF 0x0008 |
| #define WIN_REMAP_LOW 0xffff0000 |
| #define WIN_REMAP_HI_OFF 0x000c |
| |
| #define ATTR_HW_COHERENCY (0x1 << 4) |
| |
| #define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) |
| #define DDR_BASE_CS_HIGH_MASK 0xf |
| #define DDR_BASE_CS_LOW_MASK 0xff000000 |
| #define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) |
| #define DDR_SIZE_ENABLED BIT(0) |
| #define DDR_SIZE_CS_MASK 0x1c |
| #define DDR_SIZE_CS_SHIFT 2 |
| #define DDR_SIZE_MASK 0xff000000 |
| |
| #define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) |
| |
| struct mvebu_mbus_state; |
| |
| struct mvebu_mbus_soc_data { |
| unsigned int num_wins; |
| unsigned int num_remappable_wins; |
| unsigned int (*win_cfg_offset)(const int win); |
| void (*setup_cpu_target)(struct mvebu_mbus_state *s); |
| }; |
| |
| struct mvebu_mbus_state mbus_state |
| __attribute__ ((section(".data"))); |
| static struct mbus_dram_target_info mbus_dram_info |
| __attribute__ ((section(".data"))); |
| |
| /* |
| * Functions to manipulate the address decoding windows |
| */ |
| |
| static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus, |
| int win, int *enabled, u64 *base, |
| u32 *size, u8 *target, u8 *attr, |
| u64 *remap) |
| { |
| void __iomem *addr = mbus->mbuswins_base + |
| mbus->soc->win_cfg_offset(win); |
| u32 basereg = readl(addr + WIN_BASE_OFF); |
| u32 ctrlreg = readl(addr + WIN_CTRL_OFF); |
| |
| if (!(ctrlreg & WIN_CTRL_ENABLE)) { |
| *enabled = 0; |
| return; |
| } |
| |
| *enabled = 1; |
| *base = ((u64)basereg & WIN_BASE_HIGH) << 32; |
| *base |= (basereg & WIN_BASE_LOW); |
| *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1; |
| |
| if (target) |
| *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT; |
| |
| if (attr) |
| *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT; |
| |
| if (remap) { |
| if (win < mbus->soc->num_remappable_wins) { |
| u32 remap_low = readl(addr + WIN_REMAP_LO_OFF); |
| u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF); |
| *remap = ((u64)remap_hi << 32) | remap_low; |
| } else { |
| *remap = 0; |
| } |
| } |
| } |
| |
| static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus, |
| int win) |
| { |
| void __iomem *addr; |
| |
| addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); |
| |
| writel(0, addr + WIN_BASE_OFF); |
| writel(0, addr + WIN_CTRL_OFF); |
| if (win < mbus->soc->num_remappable_wins) { |
| writel(0, addr + WIN_REMAP_LO_OFF); |
| writel(0, addr + WIN_REMAP_HI_OFF); |
| } |
| } |
| |
| /* Checks whether the given window number is available */ |
| static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus, |
| const int win) |
| { |
| void __iomem *addr = mbus->mbuswins_base + |
| mbus->soc->win_cfg_offset(win); |
| u32 ctrl = readl(addr + WIN_CTRL_OFF); |
| return !(ctrl & WIN_CTRL_ENABLE); |
| } |
| |
| /* |
| * Checks whether the given (base, base+size) area doesn't overlap an |
| * existing region |
| */ |
| static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, |
| phys_addr_t base, size_t size, |
| u8 target, u8 attr) |
| { |
| u64 end = (u64)base + size; |
| int win; |
| |
| for (win = 0; win < mbus->soc->num_wins; win++) { |
| u64 wbase, wend; |
| u32 wsize; |
| u8 wtarget, wattr; |
| int enabled; |
| |
| mvebu_mbus_read_window(mbus, win, |
| &enabled, &wbase, &wsize, |
| &wtarget, &wattr, NULL); |
| |
| if (!enabled) |
| continue; |
| |
| wend = wbase + wsize; |
| |
| /* |
| * Check if the current window overlaps with the |
| * proposed physical range |
| */ |
| if ((u64)base < wend && end > wbase) |
| return 0; |
| |
| /* |
| * Check if target/attribute conflicts |
| */ |
| if (target == wtarget && attr == wattr) |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus, |
| phys_addr_t base, size_t size) |
| { |
| int win; |
| |
| for (win = 0; win < mbus->soc->num_wins; win++) { |
| u64 wbase; |
| u32 wsize; |
| int enabled; |
| |
| mvebu_mbus_read_window(mbus, win, |
| &enabled, &wbase, &wsize, |
| NULL, NULL, NULL); |
| |
| if (!enabled) |
| continue; |
| |
| if (base == wbase && size == wsize) |
| return win; |
| } |
| |
| return -ENODEV; |
| } |
| |
| static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, |
| int win, phys_addr_t base, size_t size, |
| phys_addr_t remap, u8 target, |
| u8 attr) |
| { |
| void __iomem *addr = mbus->mbuswins_base + |
| mbus->soc->win_cfg_offset(win); |
| u32 ctrl, remap_addr; |
| |
| ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | |
| (attr << WIN_CTRL_ATTR_SHIFT) | |
| (target << WIN_CTRL_TGT_SHIFT) | |
| WIN_CTRL_ENABLE; |
| |
| writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); |
| writel(ctrl, addr + WIN_CTRL_OFF); |
| if (win < mbus->soc->num_remappable_wins) { |
| if (remap == MVEBU_MBUS_NO_REMAP) |
| remap_addr = base; |
| else |
| remap_addr = remap; |
| writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF); |
| writel(0, addr + WIN_REMAP_HI_OFF); |
| } |
| |
| return 0; |
| } |
| |
| static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus, |
| phys_addr_t base, size_t size, |
| phys_addr_t remap, u8 target, |
| u8 attr) |
| { |
| int win; |
| |
| if (remap == MVEBU_MBUS_NO_REMAP) { |
| for (win = mbus->soc->num_remappable_wins; |
| win < mbus->soc->num_wins; win++) |
| if (mvebu_mbus_window_is_free(mbus, win)) |
| return mvebu_mbus_setup_window(mbus, win, base, |
| size, remap, |
| target, attr); |
| } |
| |
| |
| for (win = 0; win < mbus->soc->num_wins; win++) |
| if (mvebu_mbus_window_is_free(mbus, win)) |
| return mvebu_mbus_setup_window(mbus, win, base, size, |
| remap, target, attr); |
| |
| return -ENOMEM; |
| } |
| |
| /* |
| * SoC-specific functions and definitions |
| */ |
| |
| static unsigned int armada_370_xp_mbus_win_offset(int win) |
| { |
| /* The register layout is a bit annoying and the below code |
| * tries to cope with it. |
| * - At offset 0x0, there are the registers for the first 8 |
| * windows, with 4 registers of 32 bits per window (ctrl, |
| * base, remap low, remap high) |
| * - Then at offset 0x80, there is a hole of 0x10 bytes for |
| * the internal registers base address and internal units |
| * sync barrier register. |
| * - Then at offset 0x90, there the registers for 12 |
| * windows, with only 2 registers of 32 bits per window |
| * (ctrl, base). |
| */ |
| if (win < 8) |
| return win << 4; |
| else |
| return 0x90 + ((win - 8) << 3); |
| } |
| |
| static unsigned int orion5x_mbus_win_offset(int win) |
| { |
| return win << 4; |
| } |
| |
| static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) |
| { |
| int i; |
| int cs; |
| |
| mbus_dram_info.mbus_dram_target_id = TARGET_DDR; |
| |
| for (i = 0, cs = 0; i < 4; i++) { |
| u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); |
| u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); |
| |
| /* |
| * We only take care of entries for which the chip |
| * select is enabled, and that don't have high base |
| * address bits set (devices can only access the first |
| * 32 bits of the memory). |
| */ |
| if ((size & DDR_SIZE_ENABLED) && |
| !(base & DDR_BASE_CS_HIGH_MASK)) { |
| struct mbus_dram_window *w; |
| |
| w = &mbus_dram_info.cs[cs++]; |
| w->cs_index = i; |
| w->mbus_attr = 0xf & ~(1 << i); |
| w->base = base & DDR_BASE_CS_LOW_MASK; |
| w->size = (size | ~DDR_SIZE_MASK) + 1; |
| } |
| } |
| mbus_dram_info.num_cs = cs; |
| |
| #if defined(CONFIG_ARMADA_MSYS) |
| /* Disable MBUS Err Prop - in order to avoid data aborts */ |
| clrbits_le32(mbus->mbuswins_base + 0x200, BIT(8)); |
| #endif |
| } |
| |
| static const struct mvebu_mbus_soc_data |
| armada_370_xp_mbus_data __maybe_unused = { |
| .num_wins = 20, |
| .num_remappable_wins = 8, |
| .win_cfg_offset = armada_370_xp_mbus_win_offset, |
| .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, |
| }; |
| |
| static const struct mvebu_mbus_soc_data |
| kirkwood_mbus_data __maybe_unused = { |
| .num_wins = 8, |
| .num_remappable_wins = 4, |
| .win_cfg_offset = orion5x_mbus_win_offset, |
| .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, |
| }; |
| |
| /* |
| * Public API of the driver |
| */ |
| const struct mbus_dram_target_info *mvebu_mbus_dram_info(void) |
| { |
| return &mbus_dram_info; |
| } |
| |
| int mvebu_mbus_add_window_remap_by_id(unsigned int target, |
| unsigned int attribute, |
| phys_addr_t base, size_t size, |
| phys_addr_t remap) |
| { |
| struct mvebu_mbus_state *s = &mbus_state; |
| |
| if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { |
| printf("Cannot add window '%x:%x', conflicts with another window\n", |
| target, attribute); |
| return -EINVAL; |
| } |
| |
| return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); |
| } |
| |
| int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, |
| phys_addr_t base, size_t size) |
| { |
| return mvebu_mbus_add_window_remap_by_id(target, attribute, base, |
| size, MVEBU_MBUS_NO_REMAP); |
| } |
| |
| int mvebu_mbus_del_window(phys_addr_t base, size_t size) |
| { |
| int win; |
| |
| win = mvebu_mbus_find_window(&mbus_state, base, size); |
| if (win < 0) |
| return win; |
| |
| mvebu_mbus_disable_window(&mbus_state, win); |
| return 0; |
| } |
| |
| #ifndef CONFIG_KIRKWOOD |
| static void mvebu_mbus_get_lowest_base(struct mvebu_mbus_state *mbus, |
| phys_addr_t *base) |
| { |
| int win; |
| *base = 0xffffffff; |
| |
| for (win = 0; win < mbus->soc->num_wins; win++) { |
| u64 wbase; |
| u32 wsize; |
| u8 wtarget, wattr; |
| int enabled; |
| |
| mvebu_mbus_read_window(mbus, win, |
| &enabled, &wbase, &wsize, |
| &wtarget, &wattr, NULL); |
| |
| if (!enabled) |
| continue; |
| |
| if (wbase < *base) |
| *base = wbase; |
| } |
| } |
| |
| static void mvebu_config_mbus_bridge(struct mvebu_mbus_state *mbus) |
| { |
| phys_addr_t base; |
| u32 val; |
| u32 size; |
| |
| /* Set MBUS bridge base/ctrl */ |
| mvebu_mbus_get_lowest_base(&mbus_state, &base); |
| |
| size = 0xffffffff - base + 1; |
| if (!is_power_of_2(size)) { |
| /* Round up to next power of 2 */ |
| size = 1 << (ffs(base) + 1); |
| base = 0xffffffff - size + 1; |
| } |
| |
| /* Now write base and size */ |
| writel(base, MBUS_BRIDGE_WIN_BASE_REG); |
| /* Align window size to 64KiB */ |
| val = (size / (64 << 10)) - 1; |
| writel((val << 16) | 0x1, MBUS_BRIDGE_WIN_CTRL_REG); |
| } |
| #endif |
| |
| int mbus_dt_setup_win(struct mvebu_mbus_state *mbus, |
| u32 base, u32 size, u8 target, u8 attr) |
| { |
| if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { |
| printf("Cannot add window '%04x:%04x', conflicts with another window\n", |
| target, attr); |
| return -EBUSY; |
| } |
| |
| /* |
| * In U-Boot we first try to add the mbus window to the remap windows. |
| * If this fails, lets try to add the windows to the non-remap windows. |
| */ |
| if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) { |
| if (mvebu_mbus_alloc_window(mbus, base, size, |
| MVEBU_MBUS_NO_REMAP, target, attr)) |
| return -ENOMEM; |
| } |
| |
| #ifndef CONFIG_KIRKWOOD |
| /* |
| * Re-configure the mbus bridge registers each time this function |
| * is called. Since it may get called from the board code in |
| * later boot stages as well. |
| */ |
| mvebu_config_mbus_bridge(mbus); |
| #endif |
| |
| return 0; |
| } |
| |
| int mvebu_mbus_probe(struct mbus_win windows[], int count) |
| { |
| int win; |
| int ret; |
| int i; |
| |
| #if defined(CONFIG_KIRKWOOD) |
| mbus_state.soc = &kirkwood_mbus_data; |
| #endif |
| #if defined(CONFIG_ARCH_MVEBU) |
| mbus_state.soc = &armada_370_xp_mbus_data; |
| #endif |
| |
| mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE; |
| mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE; |
| |
| for (win = 0; win < mbus_state.soc->num_wins; win++) |
| mvebu_mbus_disable_window(&mbus_state, win); |
| |
| mbus_state.soc->setup_cpu_target(&mbus_state); |
| |
| /* Setup statically declared windows in the DT */ |
| for (i = 0; i < count; i++) { |
| u32 base, size; |
| u8 target, attr; |
| |
| target = windows[i].target; |
| attr = windows[i].attr; |
| base = windows[i].base; |
| size = windows[i].size; |
| ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |