| commit 4cda437898f7873752f0201757cd33f12196ce87 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Jan 17 13:32:42 2009 -0500 |
| |
| build system: treat all Darwin's alike |
| |
| The x86 based version of Darwin behaves the same quirky way as the powerpc |
| Darwin, so only check HOSTOS when setting up Darwin workarounds. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit c088a108c75db565e07292fd668dfa5491e85bc2 |
| Author: Peter Korsgaard <jacmet@sunsite.dk> |
| Date: Wed Jan 14 13:52:24 2009 +0100 |
| |
| fdt_resize(): fix actualsize calculations with unaligned blobs |
| |
| The code in fdt_resize() to extend the fdt size to end on a page boundary |
| is wrong for fdt's not located at an address aligned on a page boundary. |
| What's even worse, the code would make actualsize shrink rather than grow |
| if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(), |
| causing fdt_add_mem_rsv to fail. |
| |
| Fix it by aligning end address (blob + size) to a page boundary instead. |
| For aligned fdt's this is equivalent to what we had before. |
| |
| Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> |
| |
| commit fadad1573fb16c90025f08a2861d6047d093cba7 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Fri Jan 9 04:38:17 2009 -0500 |
| |
| ncb: use socklen_t |
| |
| The recvfrom() function takes a socklen_t, not an int. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Jan 11 16:35:16 2009 +0100 |
| |
| sh: serial: use readx/writex accessors |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 9e1fa628bdb64745811cdd26c4f953846c076180 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Jan 11 16:35:15 2009 +0100 |
| |
| sh: serial: coding style cleanup |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c9935c992575922b7ef13eec0656ed8665d324e3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Jan 11 17:48:56 2009 +0900 |
| |
| sh: Fix compile error on lowlevel_init file |
| |
| lowlevel_init of SH was corrected to use the write/readXX macro. |
| However, there was a problem that was not able to be compiled partially. |
| This patch corrected this. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit a5b04d00bfeb940c62232972ce644d50b45797f9 |
| Author: Kieran Bingham <kieranbingham@gmail.com> |
| Date: Tue Dec 30 01:16:03 2008 +0000 |
| |
| sh: Fix up rsk7203 target for out of tree build |
| |
| Fix up rsk7203 target to build successfully using out-of-tree build. |
| |
| Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f7e78f3b74aae9caca2997bad865a72338326c0a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 20 19:29:49 2008 +0100 |
| |
| sh: use write{8,16,32} in all lowlevel_init |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit e4430779623af500de1cee7892c379f07ef59813 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 20 19:29:48 2008 +0100 |
| |
| sh: lowlevel_init coding style cleanup |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 20 15:27:45 2008 +0100 |
| |
| sh: update sh2/sh2a timer coding style |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 1e15ff999322e81af4c0c0c548908f38944ba39c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 20 15:25:22 2008 +0100 |
| |
| sh: update sh timer coding style |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 0e3ece33801e377be67ffa29f083421ad820f28b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 14 23:26:05 2009 +0100 |
| |
| Prepare 2009.01-rc2 |
| |
| Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e92c9a860e44c14513c8909ce4299e253a775eeb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 14 22:35:30 2009 +0100 |
| |
| cpu/mpc824x/Makefile: fix warning with parallel builds |
| |
| Parallel builds would occasionally issue this build warning: |
| |
| ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists |
| |
| Use "ln -sf" as quick work around for the issue. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3ba605d4beec649438539e7df97b5fedb26592fb |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jan 2 12:18:49 2009 +0100 |
| |
| ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards |
| |
| This patch adds esd's loadpci BSP command to CPCI4052 and |
| CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 600fe46fb3dab7f07604f9009904f31584415114 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jan 2 12:18:12 2009 +0100 |
| |
| ppc4xx: Disable pci node in device tree on CPCI405 pci adapters |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f6a1f490d224c600a09137e58d1026d150b8e679 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jan 2 12:17:36 2009 +0100 |
| |
| ppc4xx: Cleanup CPCI405 board code |
| |
| This patch cleans up CPCI405 board support: |
| - wrap long lines |
| - unification of spaces in function calls |
| - remove dead code |
| |
| Use correct io accessors on peripherals. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fceebb45a0b97e92f9889861f8c3b9cb885e706f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jan 2 12:16:35 2009 +0100 |
| |
| ppc4xx: Enable auto RS485 mode on PLU405 boards |
| |
| This patch turns on the auto RS485 mode in the 2nd external |
| uart on PLU405 boards. This is a special mode of the used |
| Exar XR16C2850 uart. Because these boards only have a 485 physical |
| layer connected it's a good idea to turn it on by default. |
| |
| Signed-off-by: Matthias Fuchs <mf@esd.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue Jan 13 16:29:28 2009 -0500 |
| |
| Some changes of TLB entry setting for MPC8572DS |
| |
| - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode, |
| all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0 |
| can not access PIXIS_BASE anymore (any access will cause DataTLBError exception) |
| |
| - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 950264317eb9594b2b5ee2fb65206200a1c6007a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue Jan 13 16:29:22 2009 -0500 |
| |
| Change DDR tlb start entry to CONFIG param for 85xx |
| |
| So that we can locate the DDR tlb start entry to the value other than 8. By |
| default, it is still 8. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 6d3a10f73ece7ffb736890c10e023222612a4aa0 |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Fri Jan 9 16:02:35 2009 +0800 |
| |
| Change PCIE1&2 deciide logic on MPC8544DS board more readable |
| |
| The IO port selection for MPC8544DS board: |
| Port cfg_io_ports |
| PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 |
| PCIE2 0x4, 0x5, 0x6, 0x7 |
| PCIE3 0x6, 0x7 |
| This patch changes the PCIE12 and PCIE2 logic more readable. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 028e116811d28a031660f1ad9e20ac1293b3c5c7 |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Fri Jan 9 16:01:52 2009 +0800 |
| |
| PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit |
| |
| PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of |
| PCIE1 bit. |
| On MPC8572DS board, PCIE refers to PCIE1. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47 |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Fri Jan 9 16:00:55 2009 +0800 |
| |
| Fix IO port selection issue on MPC8544DS and MPC8572DS boards |
| |
| The IO port selection is not correct on MPC8572DS and MPC8544DS board. |
| This patch fixes this issue. |
| For MPC8572 |
| Port cfg_io_ports |
| PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf |
| PCIE2 0x3, 0x7 |
| PCIE3 0x7 |
| |
| For MPC8544 |
| Port cfg_io_ports |
| PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 |
| PCIE2 0x4, 0x5, 0x6, 0x7 |
| PCIE3 0x6, 0x7 |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946 |
| Author: Becky Bruce <beckyb@kernel.crashing.org> |
| Date: Wed Dec 3 22:36:44 2008 -0600 |
| |
| mpc8610hpcd: Fix PCI mapping concepts |
| |
| Rename _BASE to _BUS, as it's actually a PCI bus address, |
| separate virtual and physical addresses into _VIRT and _PHYS, |
| and use each appopriately. This makes the code easier to read |
| and understand, and facilitates mapping changes going forward. |
| |
| Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> |
| |
| commit 79e436cad3b4a7db88408c3f05175028f30d700d |
| Author: Becky Bruce <beckyb@kernel.crashing.org> |
| Date: Wed Dec 3 22:36:26 2008 -0600 |
| |
| sbc8641d: Fix PCI mapping concepts |
| |
| Rename _BASE to _BUS, as it's actually a PCI bus address, |
| separate virtual and physical addresses into _VIRT and _PHYS, |
| and use each appopriately. This makes the code easier to read |
| and understand, and facilitates mapping changes going forward. |
| |
| Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> |
| |
| commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jan 12 14:50:35 2009 +0100 |
| |
| MPC86xx: fix build warnings |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 032a1c934ef4dc003281f57302b6e693062c1868 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Jan 5 16:09:44 2009 -0500 |
| |
| bf537-stamp/nand: fix board_nand_init prototype |
| |
| The board_nand_init() function should return an int, not void. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 687f952e4119594ab913be11c90f7f018c2a7a79 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Dec 11 07:04:48 2008 -0500 |
| |
| Blackfin: drop CONFIG_SPI handling in board init |
| |
| The eeprom SPI init functions are duplicated as the common code already |
| executes these for us. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit e7e684b10d73a303902208594c7c3e7e0d753282 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Fri Oct 24 17:51:57 2008 -0400 |
| |
| Blackfin: fix out-of-tree building with ldscripts |
| |
| Many of the Blackfin board linker scripts are preprocessed, so make sure we |
| output the linker script into the build tree rather than the source tree. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Fri Oct 24 17:48:54 2008 -0400 |
| |
| Blackfin: fix linker scripts to work with --gc-sections |
| |
| Make sure all .text sections get pulled in and the entry point is properly |
| referenced so they don't get discarded when linking with --gc-sections. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Oct 11 20:45:44 2008 -0400 |
| |
| Blackfin: set proper LDRFLAGS for parallel booting LDRs |
| |
| In order to boot an LDR out of parallel flash, the ldr utility needs a few |
| flags to tell it to generate the right header. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Jan 6 21:41:59 2009 +0100 |
| |
| at91rm9200: move define from lowlevel_init to header |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8a48686fac2030287765f1970ea046bd5734b733 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Jan 3 17:22:26 2009 +0100 |
| |
| m501sk: move to the common memory setup |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d481c80d78f954133c035dae6c7d22de3625795d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Jan 3 17:22:25 2009 +0100 |
| |
| at91rm9200: rename lowlevel init value to CONFIG_SYS_ |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4e170b16625291aa10d0d9abc3f34e8a5945d157 |
| Author: Nicolas Ferre <nicolas.ferre@atmel.com> |
| Date: Tue Jan 6 21:13:14 2009 +0100 |
| |
| at91: add at91sam9xeek board support |
| |
| At91sam9xe is basically an at91sam9260 with embedded flash. We can manage |
| it as another entry for at91sam9260 in the Makefile. |
| |
| Check documentation at : |
| http://www.atmel.com/dyn/products/product_card.asp?part_id=4263 |
| |
| Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9ffd53db870a7da134f9a1ae76894a6b31237be5 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Jan 6 21:15:57 2009 +0100 |
| |
| fix bmp_logo.h make dependencies to allow parallel build |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e12d9a8fb48d24176efffccc072b445e60a3afe4 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Jan 3 17:22:24 2009 +0100 |
| |
| at91: Fix Atmel's at91sam9 boards out of tree build |
| |
| introduced in commit 89a7a87f084c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0668236bafaa1c11c521652a2facebc74beecbf0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 30 22:56:11 2008 +0100 |
| |
| README: update mailing list name and hits to patch submission. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d9011f9b75561a0bd9254934c2bb2bc799d4f645 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Dec 23 16:32:01 2008 -0600 |
| |
| 85xx: Enable inbound PCI config cycles for X-ES boards cleanup |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Dec 23 16:32:00 2008 -0600 |
| |
| XPedite5200 board support cleanup |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit fea91edee8ae0295e3c30b1ff544df51f4d668e1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Dec 2 21:58:04 2008 +0100 |
| |
| usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Remy Böhmer <linux@bohmer.net> |
| |
| commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28 |
| Author: Trent Piepho <tpiepho@freescale.com> |
| Date: Wed Dec 3 15:16:37 2008 -0800 |
| |
| mpc8[56]xx: Put localbus clock in sysinfo and gd |
| |
| Currently MPC85xx and MPC86xx boards just calculate the localbus frequency |
| and print it out, but don't save it. |
| |
| This changes where its calculated and stored to be more consistent with the |
| CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. |
| |
| The localbus frequency is added to sysinfo and calculated when sysinfo is |
| set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. |
| |
| get_clocks() copies the frequency into the global data, as the other |
| frequencies are, into a new field that is only enabled for MPC85xx and |
| MPC86xx. |
| |
| checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency |
| from sysinfo, like the other frequencies, instead of calculating it on the |
| spot. |
| |
| Signed-off-by: Trent Piepho <tpiepho@freescale.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7 |
| Author: Trent Piepho <tpiepho@freescale.com> |
| Date: Wed Dec 3 15:16:36 2008 -0800 |
| |
| mpc86xx: Double local bus clock divider |
| |
| The local bus clock divider should be doubled for both 8610 and 8641. |
| |
| Signed-off-by: Trent Piepho <tpiepho@freescale.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 446c381e3e16f19857b72ea0d06241267b8b9d58 |
| Author: Trent Piepho <tpiepho@freescale.com> |
| Date: Wed Dec 3 15:16:35 2008 -0800 |
| |
| mpc8568: Double local bus clock divider |
| |
| The clock divider for the MPC8568 local bus should be doubled, like the |
| other newer MPC85xx chips. |
| |
| Since there are now more chips with a 2x divider than a 1x, and any new |
| 85xx chips will probably be 2x, invert the sense of the #if so that it |
| lists the 1x chips instead of the 2x ones. |
| |
| Signed-off-by: Trent Piepho <tpiepho@freescale.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Dec 16 12:09:27 2008 +0800 |
| |
| 85xx: Fix the boot window issue |
| |
| If one custom board is using the 8MB flash, it is set |
| as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000. |
| The current start.S code will be broken at switch_as. |
| |
| It is because the TLB1[15] is set as 16MB page size, |
| EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000. |
| |
| For the 8MB flash case, the EPN = 0xefxxxxxx, |
| RPN = 0xffxxxxxx. Assume the virt address of switch_as |
| is 0xef7ff18c, the real address of the instruction at |
| switch_as should be 0xff7ff18c. the 0xff7ff18c is out |
| of the range of the default 8MB boot LAW window |
| 0xff800000 - 0xffffffff. |
| |
| So when we switch to AS1 address space at switch_as, |
| the core can't fetch the instruction at switch_as any |
| more. It will cause broken issue. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 58da8890d5fbd074746037722a423de9ac408616 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 11 15:47:50 2008 -0500 |
| |
| sbc8548: use proper PHY address |
| |
| The values given for the PHY address were wrong, so the code |
| read no valid PHY ID, and fell through to the generic PHY |
| support, which would work on 1000M but would not auto negotiate |
| down to 100M or 10M. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit ad22f9273c6f24fbfa917e867680e9688e0c59c5 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 11 15:47:51 2008 -0500 |
| |
| sbc8548: enable command line editing by default. |
| |
| Lets make things a bit more user friendly. It isn't 1985 anymore. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit bd93105fa171184a71ca8b22be03dc2705cfbd3f |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 11 15:47:49 2008 -0500 |
| |
| sbc8548: don't enable the 3rd and 4th eTSEC |
| |
| These interfaces don't have usable connectors on the board, so don't |
| bother enumerating or configuring them. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 181a3650113883728927928b3ac81ad6dade4b2c |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Dec 3 10:08:19 2008 -0500 |
| |
| Set IVPR to kenrel entry point in second core boot page |
| |
| Assuming the OSes exception vectors start from the base of kernel address, and |
| the kernel physical starting address can be relocated to an non-zero address. |
| This patch enables the second core to have a valid IVPR for debugger before |
| kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid |
| value for second core which runs kernel at different physical address other |
| than 0x0. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit a5d212a263c58cc746481bf1fc878510533ce7d6 |
| Author: Trent Piepho <tpiepho@freescale.com> |
| Date: Wed Dec 3 15:16:34 2008 -0800 |
| |
| mpc8xxx: LCRR[CLKDIV] is sometimes five bits |
| |
| On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits |
| instead of four. |
| |
| In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It |
| should be safe as the fifth bit was defined as reserved and set to 0. |
| |
| Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV. |
| |
| Signed-off-by: Trent Piepho <tpiepho@freescale.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 58ec4866ed916c7e422f5107bb27b0822084728e |
| Author: Trent Piepho <tpiepho@freescale.com> |
| Date: Wed Dec 3 15:16:38 2008 -0800 |
| |
| mpc8[56]xx: Put localbus clock in device tree |
| |
| Export the localbus frequency in the device tree, the same way the CPU, TB, |
| CCB, and various other frequencies are exported in their respective device |
| tree nodes. |
| |
| Some localbus devices need this information to be programed correctly, so |
| it makes sense to export it along with the other frequencies. |
| |
| Unfortunately, when someone wrote the localbus dts bindings, they didn't |
| bother to define what the "compatible" property should be. So it seems no |
| one was quite sure what to put in their dts files. |
| |
| Based on current existing dts files in the kernel source, I've used |
| "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all |
| of the 85xx devices, and are looked for by the Linux code. The eLBC is |
| apparently not entirely backward compatible with the pq3 LBC and so eLBC |
| equipped platforms like 8572 won't use pq3-localbus. |
| |
| For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems |
| and is also looked for by the Linux code. On MPC8641, I've also used |
| "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of |
| which don't use "fsl,elbc" or any other acceptable name to match on. |
| |
| Signed-off-by: Trent Piepho <tpiepho@freescale.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9d94aff699eed38b286814fcbb335f3eb8516a0e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Dec 16 14:59:22 2008 -0600 |
| |
| NAND FSL elbc: Use virt_to_phys to determine which bank is in use |
| |
| The current code that determines which bank/chipselect is used for a |
| given NAND instance only worked for 32-bit addresses and assumed |
| a 1:1 mapping. This breaks in 36-bit physical configs. |
| |
| The proper way to handle this is to use the virt_to_phys() and |
| BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address |
| with the the virtual address the NAND code uses. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 77c8115b1f1871811633eae77a5a700fac1f0e50 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Dec 16 14:59:21 2008 -0600 |
| |
| ppc: Use addrmap in virt_to_phys and map_physmem. |
| |
| If we have addr map support enabled use the mapping functions to |
| implement virt_to_phys() and map_physmem(). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Dec 16 14:59:20 2008 -0600 |
| |
| 85xx: Add support to populate addr map based on TLB settings |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Dec 1 13:47:13 2008 -0600 |
| |
| XPedite5200 board support |
| |
| Initial support for Extreme Engineering Solutions XPedite5200 - |
| a MPC8548-based PMC single board computer. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Wed Oct 29 12:39:27 2008 -0500 |
| |
| 85xx: Enable inbound PCI config cycles for X-ES boards |
| |
| Update X-ES Freescale boards to allow inbound PCI configuration |
| cycles when configured as agent/endpoint. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Wed Dec 17 16:36:23 2008 -0600 |
| |
| XPedite5370 board support |
| |
| Initial support for Extreme Engineering Solutions XPedite5370 - |
| a MPC8572-based 3U VPX single board computer with a PMC/XMC |
| site. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit e92739d34e2d6b6aca93b2598248210710897ce8 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Wed Dec 17 16:36:21 2008 -0600 |
| |
| Add support for PCA953x I2C gpio devices |
| |
| Initial support for NXP's 4 and 8 bit I2C gpio expanders |
| (eg pca9537, pca9557, etc). The CONFIG_PCA953X define |
| enables support for the devices while the CONFIG_CMD_PCA953X |
| define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO |
| define enables an 'info' sub-command which provides summary |
| information for the given pca953x device. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 7a8979591171676417ab36852d8811a8c46accd8 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Wed Oct 29 12:39:26 2008 -0500 |
| |
| pci/fsl_pci_init: Enable inbound PCI config cycles |
| |
| Add fsl_pci_config_unlock() function to enable a |
| PCI/PCIe interface configured in agent/endpoint mode to |
| respond to inbound PCI configuration cycles. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit b616f2b545f73757669b37386f0b37bb61fc6797 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Sep 8 22:27:18 2008 +0200 |
| |
| MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Dec 16 22:10:31 2008 +0100 |
| |
| MIPS: qemu_mips: update doc to use all disk and boot linux kernel |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 13095b2f07dacb1f863772266c1789d47a523a8a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Dec 16 22:10:30 2008 +0100 |
| |
| MIPS: qemu_mips: move env storage just after u-boot |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit aced78d852d0b009e8aaa1445af8cb40861ee549 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 16 23:48:27 2008 +0100 |
| |
| Prepare 2009.01-rc1 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 16 23:13:46 2008 +0100 |
| |
| include/configs/at91cap9adk.h: fix typo. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 45ca04f2377361593151d2d4da51f8ba4832d233 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 16 22:32:25 2008 +0100 |
| |
| board/trab/memory.c: Fix compile problems. |
| |
| Apply changes from commit 44b4dbed to board/trab/memory.c, too. |
| |
| Actually we'd need a major cleanup here - as it turns out, |
| board/trab/memory.c is more or less a verbatim copy of |
| post/drivers/memory.c ... but then, trab is EOL anyway,r |
| so this is not worth the effort. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ff49ea8977b56916edd5b1766d9939010e30b181 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Tue Dec 16 14:24:16 2008 -0600 |
| |
| NAND: Mark the BBT as scanned prior to calling scan_bbt. |
| |
| Otherwise, recursion can occur if scan_bbt does not find a bad block |
| table, and tries to write one, and the attempt to erase the BBT area |
| causes a bad block check. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 584eedab66d0828f2d571a24b10526c4e65f547b |
| Author: Ilya Yanok <yanok@emcraft.com> |
| Date: Thu Dec 11 05:51:57 2008 +0300 |
| |
| jffs2: include <linux/mtd/compat.h> instead of defining own min_t |
| |
| Include <linux/mtd/compat.h> header for min_t definition instead of |
| providing our own one. Removes warnings in case of OneNAND support |
| enabled. |
| |
| Although I thinks it's a bit silly to include <linux/mtd/compat.h> |
| just for min_t... |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit b1ffecec37b57a59c139042267faac458e5324e9 |
| Author: Becky Bruce <beckyb@kernel.crashing.org> |
| Date: Wed Dec 3 23:04:37 2008 -0600 |
| |
| powerpc: fix io.h build warning with CONFIG_PHYS_64BIT |
| |
| Casting a pointer to a phys_addr_t when it's an unsigned long long |
| on a 32-bit system without first casting to a non-pointer type |
| generates a compiler warning. Fix this. |
| |
| Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> |
| |
| commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 16 16:22:50 2008 +0100 |
| |
| trab: make trab_fkt standalone code independent of libgcc |
| |
| Use our own local functions in lib_arm/ instead. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 16 14:44:06 2008 +0100 |
| |
| post/Makefile: fix dependency problem with parallel builds |
| |
| Parallel builds (using "make -jN") would occasionally fail with error |
| messages like |
| ppc_4xxFP-objdump: string.o: File format not recognized |
| or |
| post/libpost.a(cpu.o): In function `cpu_post_test': |
| /home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string' |
| or similar. We now make sure to run the 'postdeps" step before |
| attempting to build the specific POST libraries. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 16 14:41:02 2008 +0100 |
| |
| Makefile: fix dependency problem with parallel builds |
| |
| Parallel builds (using "make -jN") would occasionally fail with error |
| messages like |
| include/autoconf.mk:212: *** missing separator. Stop. |
| Line numbers and affected boards were changing. Obviously some |
| Makefiles included autoconf.mk while it was still being written to. |
| As a fix, we now write to a temporary file first and then rename it, |
| so that it is really ready to use as soon as it appears. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 16 01:02:17 2008 +0100 |
| |
| Coding style cleanup, update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 84bc72d90c505fec3ef4b693995407a0bd4064e5 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Dec 11 18:39:08 2008 -0500 |
| |
| spi/stmicro: fix debug() display of cmd |
| |
| The stmicro_wait_ready() func tries to show the actual opcode that was sent |
| to the device, but instead it displays the array pointer. Fix it to pull |
| out the opcode from the start of the array. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Dec 11 06:23:37 2008 -0500 |
| |
| env_sf: support embedded environments |
| |
| If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect |
| size is larger than the env size, then it means the env is embedded in a |
| block. So we have to save/restore the part of the sector which is not the |
| environment. Previously, saving the environment in SPI flash in this |
| setup would probably brick the board as the rest of the sector tends to |
| contain actual U-Boot data/code. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Dec 3 11:28:30 2008 -0600 |
| |
| i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions |
| |
| All implementations of the functions i2c_reg_read() and |
| i2c_reg_write() are identical. We can save space and simplify the |
| code by converting these functions into inlines and putting them in |
| i2c.h. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e39cd81c44740d7355d277ed3d38536cbe1e003d |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Dec 5 15:36:14 2008 +0800 |
| |
| lib_ppc: rework the flush_cache |
| |
| - It is possible to miss flush/invalidate the last |
| cache line, we fix it at here. |
| - add the volatile and memory clobber. |
| |
| They are pointed by Scott Wood. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Sat Dec 13 17:20:28 2008 -0600 |
| |
| Introduce addr_map library |
| |
| Add a library that helps in translating between virtual and physical |
| addresses. This library can be useful as a simple means to implement |
| map_physmem() and virt_to_phys() for platforms that need functionality |
| beyond the simple 1:1 mapping. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 65e43a10631537dcb92c302d36301a12308216c3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Sat Dec 13 17:20:27 2008 -0600 |
| |
| Introduce virt_to_phys() |
| |
| virt_to_phys() returns the physical address given a virtual. In most |
| cases this will be just the input value as the vast majority of |
| systems run in a 1:1 mode. |
| |
| However in systems that are not running this way it should report the |
| physical address or ~0 if no mapping exists for the given virtual |
| address. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 45845301af3de8675c1f7bbc815c6de35452605a |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Sun Dec 7 22:12:50 2008 +0100 |
| |
| POST Make: fix the sub-dir dependencies missing. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 22525779cb51f1bbe4e96fea7b778de1935a5a69 |
| Author: Martin Michlmayr <tbm@cyrius.com> |
| Date: Wed Aug 6 14:44:05 2008 +0300 |
| |
| Fix a typo in fw_env.config |
| |
| Reported-by: Martin Michlmayr <tbm@cyrius.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ba490b7761c62b549c222a9723e532dc801a3899 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Dec 1 16:22:45 2008 -0600 |
| |
| Remove unused CONFIG_ADDR_STREAMING defines |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit d16da93430520d3e46c1ab52eedacf36ab7a2311 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Nov 24 11:54:47 2008 -0600 |
| |
| cmd_mem: Remove unused variable |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Dec 14 10:29:39 2008 +0100 |
| |
| Fix new found CFG_ |
| |
| Also fix some minor typos. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0e0c862efe7279e9609db74d758cd1b84c6c7209 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Sep 19 12:07:34 2008 +0200 |
| |
| Remove compiler warning: target CPU does not support interworking |
| |
| This warning is issued by modern ARM-EABI GCC on non-thumb targets. |
| |
| Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Nov 24 13:33:51 2008 +0100 |
| |
| Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent |
| |
| FDT support is used for both FIT style images and for architectures |
| that can pass a fdt blob to an OS (ppc, m68k, sparc). |
| |
| For other architectures and boards which do not pass a fdt blob to an |
| OS but want to use the new uImage format, we just need FIT support. |
| |
| Now we can have the 4 following configurations : |
| |
| 1) FIT only CONFIG_FIT |
| 2) fdt blob only CONFIG_OF_LIBFDT |
| 3) both CONFIG_OF_LIBFDT & CONFIG_FIT |
| 4) none none |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Dec 10 15:13:32 2008 +0100 |
| |
| ppc4xx: Disable EEPROM write access on PMC440 boards |
| |
| This patch disables EEPROM wrtie access by default on PMC440 board. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Dec 10 15:12:56 2008 +0100 |
| |
| ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 71fa0714fe5134bc8718c38d5261d267e88582ba |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 18 16:36:12 2008 +0100 |
| |
| MIPS: Flush data cache upon relocation |
| |
| This patch now adds a flush to the data cache upon relocation. The |
| current implementation is missing this. Only a comment states that it |
| should be done. So let's really do it now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 44174343688dba32571a34550dba08971c65fef1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 18 16:36:22 2008 +0100 |
| |
| MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT |
| |
| This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This |
| enables support for boards where the lowlevel initialization is |
| already done when U-Boot runs (e.g. via OnChip ROM). |
| |
| This will be used in the upcoming VCTH board support. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit db08ecaa6eb8176904b3bae103a85ee8f735dc40 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 12 13:18:02 2008 +0100 |
| |
| MIPS: Add board_early_init_f() to init_sequence |
| |
| This patch adds the board_early_init_f() call to the MIPS init |
| sequence. A weak dummy implementation is also added which can be |
| overridden by a board specific version. |
| |
| This will be used by the upcoming VCTH board support. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 12 13:18:19 2008 +0100 |
| |
| MIPS: Add onenand_init() to board.c and move nand_init() |
| |
| This patch adds a call to onenand_init() for OneNAND support and moves |
| the nand_init() call to an earlier place, so that the environment can |
| be used from NAND and OneNAND. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit d8bbc51c7ba9b737a20984333d19fe28a3526431 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Dec 9 11:32:46 2008 +0900 |
| |
| sh: Update sh2/sh2a timer |
| |
| Renesas SH2/SH2A timer broken. |
| This patch fix timer function. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit a319f1496210117b73198e3d889ffffaf6825d00 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Dec 5 07:27:37 2008 +0100 |
| |
| sh: r2dplus fix register access |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Dec 2 07:40:03 2008 +0100 |
| |
| sh: r2dplus/lowlevel_init: coding style fix |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Nov 25 11:05:19 2008 +0900 |
| |
| sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT |
| |
| SH4 is different a value of CACHE_OC_NUM_ENTRIES and |
| CACHE_OC_WAY_SHIFT every CPU. |
| This patch corrects these values. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit e9d5f35497885b3c65d494d09a525d443dcccd3b |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Nov 20 16:44:42 2008 +0900 |
| |
| sh: Update sh timer function |
| |
| Change to write/readX function and fix timer problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b81786cff476c41e332eaeb679158f6527cd67d4 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Nov 4 11:58:58 2008 +0900 |
| |
| sh: Migo-R: Update BSC value |
| |
| A value of BSC CS4 was wrong, Fixed it. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 5783758fd260a02f44566ad8f29f899565cd0403 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Mon Nov 17 16:52:09 2008 +0900 |
| |
| sh: Update ms7722se board config |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Mon Nov 17 16:53:09 2008 +0900 |
| |
| sh: Update SuperH serial driver |
| |
| The address of SCFSR register is wrong at SH7720/SH7721. |
| This patch fix this. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 9a1d3557dcd47365c12eeab584b822e57d994352 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 11 22:20:15 2008 +0100 |
| |
| sh: fix rsk7203 and MigoR out of tree build |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 1951f847f0a851853871b613ad7cf21a5242226c |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Dec 10 14:41:25 2008 +0100 |
| |
| ppc4xx: Update TEXT_BASE for CPCI405 boards |
| |
| This patch fixes building U-Boot for CPCI405 boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 9 20:08:01 2008 +0100 |
| |
| ppc4xx: Remove some features from ALPR to fit into 256k again |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3b089e4f889a2902449d55e081c886ae607cae89 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Dec 10 10:32:59 2008 +0100 |
| |
| UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization |
| |
| With this patch we set the type back to NONE upon failing UBI partition |
| initialization. Otherwise further calls to the UBI subsystem would try |
| to really access the non-existing UBI partition. |
| |
| Thanks to Michael Lawnick for pointing this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 817329351639a8895cd9b87b33aeff043f3d5a44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Dec 10 10:28:33 2008 +0100 |
| |
| UBI: Return -ENOMEM upon failing malloc |
| |
| Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon |
| failing malloc(). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Tue Dec 9 23:34:15 2008 -0800 |
| |
| Fix compile error in building MBX860T. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Nov 25 11:42:20 2008 +0100 |
| |
| microblaze: Remove XUPV2P board |
| |
| --- |
| |
| Microblaze platforms use generic settings and to have |
| many platforms is confusing that's why I decided to remove this |
| platform from U-BOOT. ml401 tree is sufficient for covering |
| all Microblaze platforms. |
| |
| This change will go through microblaze custodian tree. |
| |
| commit 99ba6f353582720defff6e6e6761dc455a207d31 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Nov 24 18:25:41 2008 +0100 |
| |
| microblaze: Remove CONFIG_LIBFDT due to error in common files |
| |
| commit e7d591e823a991513833af7030468409e25a3b13 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Nov 24 11:43:00 2008 +0100 |
| |
| microblaze: Fix ml401 uart16550 setting |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Nov 24 11:38:22 2008 +0100 |
| |
| microblaze: Set up relocation is done |
| |
| commit bcb6dd9187d4b23c748704767bd12d20c829e996 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Dec 9 23:20:31 2008 -0500 |
| |
| tools/netconsole: new script for working with netconsole over UDP |
| |
| While the doc/README.NetConsole does have a snippet for people to |
| create their own netcat script, it's a lot easier to make a simple |
| dedicated script and tell people to use it. |
| |
| Also spruce it up a bit to make it user friendly. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0 |
| Author: Sonic Zhang <Sonic.Zhang@analog.com> |
| Date: Tue Dec 9 23:20:18 2008 -0500 |
| |
| fs/fat: handle FAT on SATA |
| |
| The FAT file system driver should also handle FAT on SATA devices. |
| |
| Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com> |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Mon Nov 24 08:15:02 2008 -0500 |
| |
| libfdt: Fix redefined uintptr_t warning for USE_HOSTCC |
| |
| Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the |
| following warnings from FDT: |
| |
| include/libfdt_env.h:50: warning: redefinition of 'uintptr_t' |
| /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here |
| |
| Fix: Protect the definition of uintptr_t when compiling on the host |
| system. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b |
| Author: Graeme Russ <graeme.russ@gmail.com> |
| Date: Sat Nov 22 08:43:29 2008 +1100 |
| |
| Moved sc520 PCI definitions to stand-alone file |
| |
| Signed Off By: Graeme Russ <graeme.russ@gmail.com> |
| |
| commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa |
| Author: Graeme Russ <graeme.russ@gmail.com> |
| Date: Sat Nov 22 08:43:21 2008 +1100 |
| |
| Fixed path to sc520 SSI include file |
| |
| Signed Off By: Graeme Russ <graeme.russ@gmail.com> |
| |
| commit d4f70da544c33db3e4fce6473dea4ecca4322545 |
| Author: Graeme Russ <graeme.russ@gmail.com> |
| Date: Fri Nov 21 06:28:05 2008 +1100 |
| |
| Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c |
| |
| Signed-off-by: Graeme Russ <graeme.russ@gmail.com> |
| |
| commit c034075a713b60e654c64e88e87da29440f31bb4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 12 13:30:10 2008 +0100 |
| |
| serial: Add vcth UART driver |
| |
| This patch adds the UART driver for the upcoming VCTH board support. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 142a80ffc3b537a9c45acd2444a42a77f147c602 |
| Author: Ilya Yanok <yanok@emcraft.com> |
| Date: Thu Nov 13 19:49:36 2008 +0300 |
| |
| jffs2: cache data_crc results |
| |
| As we moved data_crc() invocation from jffs2_1pass_build_lists() to |
| jffs2_1pass_read_inode() data_crc is going to be calculated on each |
| inode access. This patch adds caching of data_crc() results. There |
| is no significant improvement in speed (because of flash access |
| caching added in previous patch I think, crc in RAM is really fast) |
| but this patch impacts memory usage -- every b_node structure uses |
| 12 bytes instead of 8. |
| |
| Signed-off-by: Alexey Neyman <avn@emcraft.com> |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit 9b7076229ec6a958bd835ab70745f7676297ce82 |
| Author: Ilya Yanok <yanok@emcraft.com> |
| Date: Thu Nov 13 19:49:35 2008 +0300 |
| |
| jffs2: summary support |
| |
| This patch adds support for reading fs information from summary |
| node instead of scanning full eraseblock. |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit 70741004dc28946cd82c7af6789c4ddb3fc94526 |
| Author: Ilya Yanok <yanok@emcraft.com> |
| Date: Thu Nov 13 19:49:34 2008 +0300 |
| |
| jffs2: add buffer to cache flash accesses |
| |
| With this patch JFFS2 code allocates memory buffer of max_totlen size |
| (size of the largest node, calculated during scan time) and uses it to |
| store entire node. Speeds up loading. If malloc fails we use old ways |
| to do things. |
| |
| Signed-off-by: Alexey Neyman <avn@emcraft.com> |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit 8a36d31f72411144ac0412ee7e1880e801acd754 |
| Author: Ilya Yanok <yanok@emcraft.com> |
| Date: Thu Nov 13 19:49:33 2008 +0300 |
| |
| jffs2: rewrite jffs2 scanning code based on Linux one |
| |
| Rewrites jffs2_1pass_build_lists() function in style of Linux's |
| jffs2_scan_medium() and jffs2_scan_eraseblock(). |
| This includes: |
| - Caching flash acceses |
| - Smart dealing with free space |
| |
| Signed-off-by: Alexey Neyman <avn@emcraft.com> |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237 |
| Author: Ilya Yanok <yanok@emcraft.com> |
| Date: Thu Nov 13 19:49:32 2008 +0300 |
| |
| jffs2: add sector_size field to part_info structure |
| |
| This patch adds sector_size field to part_info structure (used |
| by new JFFS2 code). |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit f73846956778a7dfee83403ef9747aff77198848 |
| Author: Ilya Yanok <yanok@emcraft.com> |
| Date: Thu Nov 13 19:49:31 2008 +0300 |
| |
| jffs2: fix searching for latest version in jffs2_1pass_list_inodes() |
| |
| We need to update i_version inside cycle to find really latest version |
| inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside |
| dump_inode() instead of calling expensive jffs2_1pass_read_inode(). |
| |
| Signed-off-by: Alexey Neyman <avn@emcraft.com> |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 9 23:13:51 2008 +0100 |
| |
| evb64260: fix "cast to pointer from integer of different size" warnings |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d2776827315c3d469b8cb4cec14d58877798daa2 |
| Author: Stefan Althoefer <stefan.althoefer@web.de> |
| Date: Sun Dec 7 19:39:11 2008 +0100 |
| |
| USB: descriptor handling |
| |
| Hi, |
| |
| I found a bug when working with the u-boot USB subsystem on IXP425 processor |
| (big endian Xscale aka ARMv5). |
| I recognized that the second usb_endpoint_descriptor of the attached memory |
| stick was corrupted. |
| |
| The reason for this are the packed structures below (either u-boot and |
| u-boot-usb): |
| |
| -------------- |
| /* Endpoint descriptor */ |
| struct usb_endpoint_descriptor { |
| unsigned char bLength; |
| unsigned char bDescriptorType; |
| unsigned char bEndpointAddress; |
| unsigned char bmAttributes; |
| unsigned short wMaxPacketSize; |
| unsigned char bInterval; |
| unsigned char bRefresh; |
| unsigned char bSynchAddress; |
| |
| } __attribute__ ((packed)); |
| /* Interface descriptor */ |
| struct usb_interface_descriptor { |
| unsigned char bLength; |
| unsigned char bDescriptorType; |
| unsigned char bInterfaceNumber; |
| unsigned char bAlternateSetting; |
| unsigned char bNumEndpoints; |
| unsigned char bInterfaceClass; |
| unsigned char bInterfaceSubClass; |
| unsigned char bInterfaceProtocol; |
| unsigned char iInterface; |
| |
| unsigned char no_of_ep; |
| unsigned char num_altsetting; |
| unsigned char act_altsetting; |
| struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; |
| } __attribute__ ((packed)); |
| ------------ |
| |
| As usb_endpoint_descriptor is only 7byte in length, the start of all |
| odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize |
| of these structures also not word aligned. |
| |
| ARMv5 Architecture however does not support non-aligned multibyte |
| data type (see A2.8 of ARM Architecture Reference Manual). |
| |
| Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de> |
| Signed-off-by: Remy Böhmer <linux@bohmer.net> |
| |
| commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Dec 9 10:27:33 2008 -0600 |
| |
| drivers/fsl_pci_init: Fix compile warning |
| |
| fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows': |
| fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type |
| |
| The check only makes sense if we are CONFIG_PHYS_64BIT |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit dedacc18a8c2b3951581eb721fa055a4e0ac4845 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Dec 7 09:45:35 2008 +0100 |
| |
| usbtty/omap: update to current API |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Remy Böhmer <linux@bohmer.net> |
| |
| commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Tue Dec 9 17:52:05 2008 +0100 |
| |
| video: fix FADS823 and RRvision compiling issues |
| |
| Since commit 561858ee building for FADS823 and RRvision |
| doesn't work. Let's include version.h and timestamp.h |
| unconditionally to fix the problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 2d2e05727fe4013f807ffa814dff0e75259a1db4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 2 10:53:47 2008 +0100 |
| |
| UBI: Fix size parsing in "ubi create" |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 27 14:07:09 2008 +0100 |
| |
| UBI: Enable re-initializing of the "ubi part" command |
| |
| With this patch now, the user can call "ubi part" multiple times to |
| re-connect the UBI device to another MTD partition. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 27 14:05:15 2008 +0100 |
| |
| MTD: Fix problem based on non-working relocation (list head mtd_partitions) |
| |
| Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon |
| first call of add_mtd_partitions(). Otherwise this won't work on platforms |
| where the relocation is broken (like MIPS or PPC). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47 |
| Author: Trent Piepho <tpiepho@freescale.com> |
| Date: Wed Nov 12 17:29:48 2008 -0800 |
| |
| Section name should be ".data", not "data" |
| |
| Signed-off-by: Trent Piepho <tpiepho@freescale.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 9 00:39:08 2008 +0100 |
| |
| MAKEALL: Automatically use parallel builds |
| |
| Add logic to the MAKEALL script to determine the number of CPU cores |
| on the system, and run a parallel build if there is more than one. |
| Usually this significantrly accelerates builds. |
| |
| Allow to manually adjust the number of parallel make jobs by using |
| the "BUILD_NCPUS" environment variable. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 268405fa7c44156c5192a70779920c70906af8d6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Dec 9 00:24:30 2008 +0100 |
| |
| vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 153176a9414120ca1736f3cc4951623d6e14e6af |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 11 06:08:59 2008 +0100 |
| |
| avr32/bootm: remove unused variable 'ret' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Wed Nov 12 13:06:48 2008 -0600 |
| |
| Remove unneeded CONFIG_SHELL references |
| |
| Make should be using the bash shell by default which makes |
| CONFIG_SHELL unnecessary |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit cf7a7b99794bac936899819b95539be1dbd71708 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Wed Nov 12 12:33:20 2008 -0600 |
| |
| Use bash for default GNU Make shell application |
| |
| Some Make script commands rely on bash-specific features like brace |
| expansion, so default to bash for the SHELL variable with a fallback |
| to the standard sh shell |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 4b530018764934ad5689196e9aa5714a6f4d1a6c |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Nov 12 09:50:45 2008 +0100 |
| |
| jffs2: rename devices_init () in common/jffs2.c |
| |
| rename devices_init () in common/jffs2.c to |
| jffs2_devices_init (), because there is also a |
| devices_init () in common/devices.c. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit af5eb847a10f1037590001355d88bab3fe7be48b |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Mon Nov 10 12:46:20 2008 +0000 |
| |
| SPARC: Fixed compiler error introduced by commit c160a9544743 |
| |
| This patch fixes a build error for the SPARC platform. It was |
| introduced by commit c160a9544743e80e8889edb2275538e7764ce334. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 4c60259899aa00f59db0d936b8807f9a26411c0f |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Sun Nov 9 12:50:59 2008 +0100 |
| |
| mgsuvd add the board-specific part of the HDLC driver |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70 |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Sun Nov 9 12:45:03 2008 +0100 |
| |
| mgcoge add the board-specific part of the HDLC driver |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit 135f5534538bb8ea4f38a7030da12187d22ef7e0 |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Sun Nov 9 12:36:15 2008 +0100 |
| |
| keymile add the common parts of the HDLC driver |
| |
| This implements the ICN protocol used across the backplane and is |
| needed by all the keymile boards. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Nov 7 22:46:22 2008 +0100 |
| |
| drivers/bios_emulator: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5 |
| Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> |
| Date: Thu Nov 6 14:01:51 2008 -0500 |
| |
| common/cmd_ide.c: Corrected endian order printing for compact flash serial number. |
| |
| Corrected endian order printing for compact flash serial number. |
| |
| Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> |
| |
| commit 16a28ef219c27423a1ef502f19070c4d375079b8 |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Thu Nov 6 15:04:23 2008 +0100 |
| |
| IOMUX: Add console multiplexing support. |
| |
| Modifications to support console multiplexing. This is controlled using |
| CONFIG_SYS_CONSOLE_MUX in the board configuration file. |
| |
| This allows a user to specify multiple console devices in the environment |
| with a command like this: setenv stdin serial,nc. As a result, the user can |
| enter text on both the serial and netconsole interfaces. |
| |
| All devices - stdin, stdout and stderr - can be set in this manner. |
| |
| 1) common/iomux.c and include/iomux.h contain the environment setting |
| implementation. |
| 2) doc/README.iomux contains a somewhat more detailed description. |
| 3) The implementation in (1) is called from common/cmd_nvedit.c to |
| handle setenv and from common/console.c to handle initialization of |
| input/output devices at boot time. |
| 4) common/console.c also contains the code needed to poll multiple console |
| devices for input and send output to all devices registered for output. |
| 5) include/common.h includes iomux.h and common/Makefile generates iomux.o |
| when CONFIG_SYS_CONSOLE_MUX is set. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Nov 4 16:03:46 2008 -0500 |
| |
| strings: use puts() rather than printf() |
| |
| When running `strings` on really long strings, the stack tends to get |
| smashed due to printf(). Switch to puts() instead since we're only passing |
| the data through. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b03150b52e3c491a86a3cc0945274f0e8f9872e7 |
| Author: Niklaus Giger <niklaus.giger@member.fsf.org> |
| Date: Mon Nov 3 22:16:18 2008 +0100 |
| |
| Use new CONFIG_SYS_VXWORKS parameters for Netstal boards |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> |
| |
| commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9 |
| Author: Niklaus Giger <niklaus.giger@member.fsf.org> |
| Date: Mon Nov 3 22:15:34 2008 +0100 |
| |
| cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters |
| |
| - fix size too small by one in sprintf |
| - changed old (pre 2004) device name ibmEmac to emac |
| - boot device may be overriden in board config |
| - servername may be defined in board config |
| - additional parameters may be defined in board config |
| - fixed some line wrappings |
| - replaced redundant MAX define by max |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> |
| |
| commit e9084b23d16102f44ace24379a1c0c352497ef80 |
| Author: Niklaus Giger <niklaus.giger@member.fsf.org> |
| Date: Mon Nov 3 22:14:36 2008 +0100 |
| |
| Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> |
| |
| commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f |
| Author: Niklaus Giger <niklaus.giger@member.fsf.org> |
| Date: Mon Nov 3 22:13:47 2008 +0100 |
| |
| README: Document CONFIG_SYS parameters for vxworks |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> |
| |
| commit ace514837cac656e29c37a19569cb8ea83071126 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Fri Oct 31 11:12:38 2008 -0500 |
| |
| lcd: Let the board code show board-specific info cleanup |
| |
| remove unneeded version.h from lcd.c |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Nov 3 09:30:59 2008 -0600 |
| |
| Update U-Boot's build timestamp on every compile |
| |
| Use the GNU 'date' command to auto-generate a new U-Boot |
| timestamp on every compile. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 83ad179e2f0f625b88adb8ef5696709e46fb9077 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Thu Dec 4 22:25:57 2008 +0100 |
| |
| Remove redundant armv4 flag from arm926ejs compile flags |
| |
| Currently the arm926ejs tree has the armv4 option set during compilation. |
| This flag does not belong here because a arm926 CPU is always a armv5 CPU. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| |
| commit 89a7a87f084c657f8e32b513a77b50eca07e17ec |
| Author: Nicolas Ferre <nicolas.ferre@atmel.com> |
| Date: Sat Dec 6 13:11:14 2008 +0100 |
| |
| at91: Choose environment variables location within make config target |
| |
| This patch adds the possiblity to choose the media where the environment will |
| be located. This allow to choose this fundamental configuration without editing |
| config files. |
| |
| Documentation file added. |
| |
| Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> |
| Acked-by: Stelian Pop <stelian@popies.net> |
| Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1450c4a6682378567030414a9f1198c39b7730c7 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Mon Nov 3 15:30:34 2008 +0100 |
| |
| lwmon, tqm8xx: Fix build errors |
| |
| Commit 6b59e03e0237a40a2305ea385defdfd92000978b |
| lcd: Let the board code show board-specific info |
| |
| introduced some bugs which prevent U-Boot building |
| for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will |
| be defined in the board configuration. |
| |
| Also "LCD enabled" building for TQM823L doesn't work |
| since this commit. |
| |
| This patch fixes above-mentioned issues. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Nov 2 01:18:18 2008 -0400 |
| |
| ignore .gdb_history files |
| |
| When using gdb, history files will often get generated. So ignore them. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 31 12:26:55 2008 +0100 |
| |
| FPGA: move fpga drivers to drivers/fpga |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Dec 1 16:29:38 2008 -0600 |
| |
| net: Fix TftpStart() ip:filename bug |
| |
| The TftpStart() function modifies the 'BootFile' |
| string when 'BootFile' contains both an IP address |
| and filename (eg 1.2.3.4:/path/file). This causes |
| subsequent calls to TftpStart to incorrectly parse |
| the TFTP filename and server IP address to use. |
| For example: |
| |
| => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant |
| Speed: 100, half duplex |
| Using eTSEC1 device |
| TFTP from server 10.52.0.62; our IP address is 10.52.253.79 |
| ^^^^^^^^^^ CORRECT |
| Filename '/home/ptyser/non_existant'. |
| ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT |
| Load address: 0x100000 |
| Loading: * |
| TFTP error: 'File not found' (1) |
| Starting again |
| |
| eTSEC2: No link. |
| Speed: 100, half duplex |
| Using eTSEC1 device |
| TFTP from server 10.52.0.33; our IP address is 10.52.253.79 |
| ^^^^^^^^^^ WRONG |
| Filename '10.52.0.62'. |
| ^^^^^^^^^^ WRONG |
| Load address: 0x100000 |
| Loading: * |
| TFTP error: 'File not found' (1) |
| Starting again |
| |
| TftpStart() was modified to not modify the 'BootFile' string. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d32c5be50bf0600bfdc54223ef341ee9c63db445 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Dec 1 16:26:21 2008 -0600 |
| |
| net: Add additional IP fragmentation check |
| |
| Ignore IP packets which have the "more fragments" flag bit |
| set. This flag indicates the IP packet is fragmented and |
| must be ignored by U-Boot. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Dec 1 16:26:20 2008 -0600 |
| |
| net: Define IP flag field values |
| |
| These defines were pulled from the "Add simple |
| IP/UDP fragmentation support" patch from Frank |
| Haverkamp <haver@vnet.ibm.com>. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 23afaba65ec5206757e589ef334a8b38168c045f |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Tue Dec 2 10:31:04 2008 +0100 |
| |
| net: tsec: Fix Marvell 88E1121R phy init |
| |
| This patch tries to ensure that phy interrupt pin |
| won't be asserted after booting. We experienced |
| following issues with current 88E1121R phy init: |
| |
| Marvell 88E1121R phy can be hardware-configured |
| to share MDC/MDIO and interrupt pins for both ports |
| P0 and P1 (e.g. as configured on socrates board). |
| Port 0 interrupt pin will be shared by both ports |
| in such configuration. After booting Linux and |
| configuring eth0 interface, port 0 phy interrupts |
| are enabled. After rebooting without proper eth0 |
| interface shutdown port 0 phy interrupts remain |
| enabled so any change on port 0 (link status, etc.) |
| cause assertion of the interrupt. Now booting Linux |
| and configuring eth1 interface will cause permanent |
| phy interrupt storm as the registered phy 1 interrupt |
| handler doesn't acknowledge phy 0 interrupts. This |
| of course should be fixed in Linux driver too. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Dec 2 12:59:51 2008 -0600 |
| |
| net: Fix download command parsing |
| |
| When CONFIG_SYS_HUSH_PARSER is defined network download |
| commands with 1 argument in the format 'tftp "/path/file"' |
| do not work as expected. The hush command parser strips |
| the quotes from "/path/file" which causes the network |
| commands to interpret "/path/file" as an address |
| instead of the intended filename. |
| |
| The previous check for a leading quote in netboot_common() |
| was replaced with a check which ensures only valid |
| numbers are treated as addresses. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3c2c2f427905040c1513d0c51d637689cba48346 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Thu Nov 27 22:30:27 2008 +0100 |
| |
| Remove non-ascii characters from fat code |
| |
| This code contains some non-ascii characters in comment lines and code. |
| Most editors do not display those characters properly and editing those |
| files results always in diffs at these places which are usually not required |
| to be changed at all. This is error prone. |
| |
| So, remove those weird characters and replace them by normal C-style |
| equivalents for which the proper defines were already in the header. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| |
| commit dc889e865356497d3e495570118c2245ebce2631 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Nov 28 20:16:58 2008 +0800 |
| |
| 85xx: fix the wrong DDR settings for MPC8572DS |
| |
| The default DDR freq is 400MHz or 800M data rate, |
| the old settings is pure wrong for the default case. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 9df59533f77de2829b4b66e5b7620e04edaa391c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 24 10:29:26 2008 -0600 |
| |
| 85xx: init gd as early as possible |
| |
| Moved up the initialization of GD so C code like set_tlb() can use |
| gd->flags to determine if we've relocated or not in the future. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit aed461af81012a398a205e9be67ab37667491838 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 24 10:29:25 2008 -0600 |
| |
| 85xx: Fix relocation of CCSRBAR |
| |
| If the virtual address for CCSRBAR is the same after relocation but |
| the physical address is changing we'd end up having two TLB entries with |
| the same VA. Instead we new us the new CCSRBAR virt address + 4k as a |
| temp virt address to access the old CCSRBAR to relocate it. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ea154a1781135d822eedee7567cc156089eae93c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 24 10:25:14 2008 -0600 |
| |
| FSL: Moved BR_PHYS_ADDR for localbus to common header |
| |
| The BR_PHYS_ADDR macro is useful on all machines that have local bus |
| which is pretty much all 83xx/85xx/86xx chips. |
| |
| Additionally most 85xx & 86xx will need it if they want to support |
| 36-bit physical addresses. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Dec 1 13:47:12 2008 -0600 |
| |
| 85xx: Add PORDEVSR_PCI1 define |
| |
| Add define used to determine if PCI1 interface is in PCI or PCIX mode. |
| |
| Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1 |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Fri Nov 21 19:24:22 2008 -0600 |
| |
| drivers/fsl_pci_init: Fix inbound window mapping bug |
| |
| The current code will cause the creation of a 4GB window |
| starting at 0 if we have more than 4GB of RAM installed, |
| which overlaps with PCI_MEM space and causes pci_bus_to_phys() |
| to return erroneous information. Limit the size to 4GB - 1; |
| which causes the code to create one 2GB and one 1GB window |
| instead. |
| |
| Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 5a105a333dab6a23e92d763ce76d6f31d57f45df |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 20 15:36:48 2008 -0600 |
| |
| Removed unused CONFIG_L1_INIT_RAM symbol. |
| |
| Prevent further viral propogation of the unused |
| symbol CONFIG_L1_INIT_RAM by just removing it. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7008d26a40a76f90cae5824c812cfed449fb97b8 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Oct 29 09:21:44 2008 -0500 |
| |
| fsl ddr skip interleaving if not supported. |
| |
| Removed while(1) hang if memctl_intlv_ctl is set wrong. |
| Remove embedded tabs from strings. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit dd332e18d082de75eca3fc2c7c778f5d4571a096 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Nov 13 18:08:57 2008 +0100 |
| |
| 85xx: socrates: fix DDR SDRAM tlb entry configuration |
| |
| since commit be0bd8234b9777ecd63c4c686f72af070d886517 |
| tlb entry for socrates DDR SDRAM will be reconfigured |
| by setup_ddr_tlbs() from initdram() causing an |
| inconsistency with previously configured DDR SDRAM tlb |
| entry from tlb_table: |
| |
| socrates>l2cam 7 9 |
| IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS |
| 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX |
| 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX |
| 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX |
| |
| This patch makes the presence of the DDR SDRAM tlb entry in |
| the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this |
| inconsistency. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Nov 11 10:17:10 2008 -0600 |
| |
| 85xx: Add CPU 2 errata workaround to all 8548 boards |
| |
| All mpc8548-based boards should implement the suggested workaround |
| to CPU 2 errata. Without the workaround, its possible for the |
| 8548's core to hang while executing a msync or mbar 0 instruction |
| and a snoopable transaction from an I/O master tagged to make |
| quick forward progress is present. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit e57f0fa1333cdf3ca36110aac2900712a5f82976 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 28 17:53:45 2008 +0800 |
| |
| 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case |
| |
| we need TLB entry for DDR at !SPD case. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 28 17:53:38 2008 +0800 |
| |
| 85xx: remove the unused ddr_enable_ecc in the board file |
| |
| The DDR controller of 8548/8544/8568/8572/8536 processors |
| have the ECC data init feature, and the new DDR code is |
| using the feature, and we don't need the way with DMA to |
| init memory any more. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 4a129a57d923f7c15aa1f567028a80a32d66a100 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 30 19:36:53 2008 +0100 |
| |
| at91rm9200dk: Fix typo |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 30 19:36:50 2008 +0100 |
| |
| AT91: remove non supported board AT91RM9200DF macro |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit bd876772ee04095e5dd943d97515a1f14bad4b1c |
| Author: Ilko Iliev <iliev@ronetix.at> |
| Date: Tue Dec 2 17:27:54 2008 +0100 |
| |
| mtd/dataflash.c: fix a problem with the last partition |
| |
| This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash |
| partition can be defined to use the area to the end of dataflash size. |
| Now it is possible to have only one dataflash partition from 0 to the end |
| of of dataflash size. |
| |
| Signed-off-by: Ilko Iliev <iliev@ronetix.at> |
| |
| commit 03f797793b124dccaae145b977d15d6cb9e74504 |
| Author: Ilko Iliev <iliev@ronetix.at> |
| Date: Tue Dec 2 17:20:17 2008 +0100 |
| |
| fix some coding style violations. |
| |
| This patch fix some coding style violations. |
| |
| Signed-off-by: Ilko Iliev <iliev@ronetix.at> |
| |
| commit 5e46b1e54112f4b7fd5185665e571510132c12a7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 27 14:11:37 2008 +0100 |
| |
| OneNAND: Add missing mtd info struct before calling onenand_erase() |
| |
| Without this patch "saveenv" crashes when MTD partitions are enabled (e.g. |
| for use in UBI) via CONFIG_MTD_PARTITIONS. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 29382d4064fbaff5daacff4c3209370fa5713966 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Thu Nov 20 16:43:52 2008 -0600 |
| |
| mpc8641: Fix error in README |
| |
| I made some updates to the code that didn't make it into the |
| README - fix this |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 801a194616d95e6fc426a176d9615ccbf9876c7f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 20 12:01:02 2008 -0600 |
| |
| Removed unused CONFIG_L1_INIT_RAM symbol. |
| |
| Prevent further viral propogation of the unused |
| symbol CONFIG_L1_INIT_RAM by just removing it. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f698738e46cb461e28c2d58228bb34a2fcf5a475 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 20 14:02:56 2008 -0600 |
| |
| 86xx: Fix non-64-bit compilation problems. |
| |
| Introducing 64-bit (36-bit) support for the MPC8641HPCN |
| failed to accomodate the other two 86xx boards. |
| Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH} |
| CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L} |
| with nominal 32-bit values. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd |
| Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> |
| Date: Wed Nov 26 17:40:37 2008 +0100 |
| |
| Remove obsolete command (apply afte USB style patch, 80 chars strict) |
| |
| Remove USB obsolete commmand |
| |
| Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> |
| Signed-off-by: Remy Böhmer <linux@bohmer.net> |
| |
| commit de39f8c19d7c12017248c49d432dcb81db68f724 |
| Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> |
| Date: Wed Nov 26 17:41:34 2008 +0100 |
| |
| USB style patch, 80 chars strict |
| |
| USB Code style patch |
| |
| Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> |
| Signed-off-by: Remy Böhmer <linux@bohmer.net> |
| |
| commit d10c5a87cb8affbb4d35a311370316d4383d598e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Nov 7 22:46:21 2008 +0100 |
| |
| drivers/usb: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Remy Böhmer <linux@bohmer.net> |
| |
| commit 2077e348c2a84901022ad95311b47b70361e6daa |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Tue Nov 25 10:47:02 2008 -0600 |
| |
| NAND: Fix misplaced return statement in nand_{read,write}_skip_bad(). |
| |
| This caused the operation to be needlessly repeated if there were |
| no bad blocks and no errors. |
| |
| Signed-off-by: Valeriy Glushkov <gvv@lstec.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 89295028e7d8f7a524f485328279d72fdb102385 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Nov 24 12:09:50 2008 +0100 |
| |
| ppc4xx: ml300 remove Xilinx BSP from ml300 folder |
| |
| This BSP should be outside u-boot source tree. |
| The second reason is that xilinx ppc405 was moved to generic platform. |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 24eea623d4974a169026a975ba12fb23d48154b1 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Nov 24 15:11:10 2008 +0100 |
| |
| ppc4xx: Remove unused features |
| |
| This patch disables some unused features from the PCI405 configuration |
| to keep U-Boot image size below 192k. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Nov 24 15:11:09 2008 +0100 |
| |
| ppc4xx: Use correct io accessors for PCI405 |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 348c849d86a6f0785752b9bc497a34658713d1d1 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Nov 24 15:11:08 2008 +0100 |
| |
| ppc4xx: Remove unused code from PCI405 code |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 58c696eed839af894e0265064669c402dc28b371 |
| Author: Wolfgang Denk <wd@xpert.denx.de> |
| Date: Mon Nov 24 21:50:59 2008 +0100 |
| |
| AT91RM9200DK: fix broken boot from NOR flash |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8052352f20b33bef8f9872fc983eac73d4693c38 |
| Author: Jens Scharsig <esw@bus-elektronik.de> |
| Date: Tue Nov 18 10:48:46 2008 +0100 |
| |
| at91rm9200: fix broken boot from nor flash |
| |
| This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if |
| CONFIG_AT91RM9200 is defined and nor preloader is used. |
| |
| Signed-off-by: Jens Scharsig <esw@bus-elektronik.de> |
| |
| commit 25ea652e907516a283b38237e83712a918f125d7 |
| Author: Piotr Ziecik <kosmo@semihalf.com> |
| Date: Mon Nov 17 15:58:00 2008 +0100 |
| |
| UBI: Add proof-of-concept CFI flash support |
| |
| With this patch UBI can be used on CFI flash chips. |
| |
| Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e6a7edbc1778d27431ac663b40a71dafa5d20578 |
| Author: Piotr Ziecik <kosmo@semihalf.com> |
| Date: Mon Nov 17 15:57:59 2008 +0100 |
| |
| mtd: Remove a printf() from add_mtd_device(). |
| |
| Remove a printf() from add_mtd_device(), which produces spurious output. |
| |
| Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 91809ed51d8327a8dbbf29aa98a091154c282171 |
| Author: Piotr Ziecik <kosmo@semihalf.com> |
| Date: Mon Nov 17 15:57:58 2008 +0100 |
| |
| cfi-mtd: Add cfi-mtd driver. |
| |
| Add cfi-mtd driver, which exports CFI flash to MTD layer. |
| This allows CFI flash devices to be used from MTD layer. |
| |
| Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD |
| option. Initialization is done by calling cfi_mtd_init() from |
| flash_init(). |
| |
| Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2 |
| Author: Piotr Ziecik <kosmo@semihalf.com> |
| Date: Mon Nov 17 15:49:32 2008 +0100 |
| |
| cfi_flash: Add interface for flash verbosity control |
| |
| Add interface for flash verbosity control. It allows |
| to disable output from low-level flash API. It is useful |
| when calling these low-level functions from context other |
| than flash commands (for example the MTD/CFI interface |
| implmentation). |
| |
| Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ebc9784ce6528385bb8d2558e783622d4bbf20f8 |
| Author: Piotr Ziecik <kosmo@semihalf.com> |
| Date: Thu Nov 20 15:17:38 2008 +0100 |
| |
| cfi_flash: Export flash_sector_size() function. |
| |
| Export flash_sector_size() function from drivers/mtd/cfi_flash.c, |
| so that it can be used in the upcoming cfi-mtd driver. |
| |
| Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 17 14:45:22 2008 +0100 |
| |
| cfi_flash: Make all flash access functions weak |
| |
| This patch defines all flash access functions as weak so that |
| they can be overridden by board specific versions. |
| |
| This will be used by the upcoming VCTH board support where the NOR |
| FLASH unfortunately can't be accessed memory-mapped. Special |
| accessor functions are needed here. |
| |
| To enable this weak functions you need to define |
| CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header. |
| Otherwise the "old" default functions will be used resulting |
| in smaller code. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit a5c4067017631d903e1afa6ad615f0ce19fea517 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 24 08:31:16 2008 +0100 |
| |
| UBI: Change parsing of size in commands to default to hex |
| |
| Currently the size parameters of the UBI commands (e.g. "ubi write") are |
| decoded as decimal instead of hex as default. This patch now interprets |
| all these values consistantly as hex, as all other standard U-Boot commands |
| do. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit de01c76c3ccc4e6c5989228eed58e955a3a1a968 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 21 13:06:06 2008 +0100 |
| |
| ppc4xx: ML2 shouldn't include the 4xx EMAC driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Fri Nov 14 16:19:19 2008 +0300 |
| |
| ppc4xx: katmai: Change default config |
| |
| This patch enables support for EXT2, and increases the |
| CONFIG_SYS_BOOTMAPSZ size for the default configuration |
| of the katmai boards to use them as the RAID-reference |
| AMCC setups. |
| |
| EXT2 enabling allows one to boot kernels from the EXT2 |
| formatted Compact Flash cards. |
| |
| CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the |
| Linux kernels, which use PAGE_SIZE of 256KB. Otherwise, |
| the memory area with DTB file (which is placed at the |
| end of the bootmap area) will turn out to be overlapped |
| with the BSS segment of the 256KB kernel, and zeroed |
| in early_init() of Linux. |
| |
| Actually, increasing of the bootmap size could be done |
| via setting of the bootm_size U-Boot variable, but it looks |
| like the current U-Boot implementation have some bootm_size- |
| related functionality lost. In many places through the U-Boot |
| code the CONFIG_SYS_BOOTMAPSZ definition is used directly |
| (instead of trying to read the corresponding value from the |
| environment). The same is truth for the boot_jump_linux() |
| function in lib_ppc/bootm.c, where U-Boot transfers control |
| to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size) |
| value to the booting kernel. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ddf45cc758d394591fb9bcdcbe96530f733f2bce |
| Author: Dave Mitchell <dmitch71@gmail.com> |
| Date: Thu Nov 20 14:09:50 2008 -0600 |
| |
| ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization |
| |
| Expanded OCM TLB to allow access to 64K OCM as well as 256K of |
| internal SRAM. |
| |
| Adjusted internal SRAM initialization to match updated user |
| manual recommendation. |
| |
| OCM & ISRAM are now mapped as follows: |
| physical virtual size |
| ISRAM 0x4_0000_0000 0xE300_0000 256k |
| OCM 0x4_0004_0000 0xE304_0000 64k |
| |
| A single TLB was used for this mapping. |
| |
| Signed-off-by: Dave Mitchell <dmitch71@gmail.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b14ca4b61a681f75f3125676e09d7ce6af66e927 |
| Author: Dave Mitchell <dmitch71@gmail.com> |
| Date: Thu Nov 20 14:00:49 2008 -0600 |
| |
| ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs |
| |
| Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and |
| L2 cache DCRs from ppc440.h to this new header. |
| |
| Also converted these DCR defines from lowercase to uppercase and |
| modified referencing modules to use them. |
| |
| Signed-off-by: Dave Mitchell <dmitch71@gmail.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 711e2b2af820d21d9931d4cf8057d3894600fd54 |
| Author: Steven A. Falco <sfalco@harris.com> |
| Date: Thu Nov 20 14:37:57 2008 -0500 |
| |
| ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h |
| |
| The definitions of bits in SDR_CFG are incorrect, and not used within |
| U-Boot. Therefore, they can be removed. |
| |
| The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions, |
| and are unused, so they can be removed too. |
| |
| A definition for SDR0_DDRCFG is added. |
| |
| Signed-off-by: Steven A. Falco <sfalco@harris.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e23c7c95a96eb0f068efe5c532215a10a1512a95 |
| Author: Dirk Behme <dirk.behme@gmail.com> |
| Date: Mon Nov 10 20:15:25 2008 +0100 |
| |
| ARM: OMAP: Convert IO macros |
| |
| Convert IO macros to readx/writex. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit 263b749e2e25473a48776d317bd2a7e2ddcdd212 |
| Author: Ilko Iliev <iliev@ronetix.at> |
| Date: Sun Nov 9 15:53:14 2008 +0100 |
| |
| lib_arm: do_bootm_linux() - correct a small mistake |
| |
| This patch corrects a small bug in the "if" condition: |
| the parameter "flag" is 0 and the "if" condition is always true. |
| The result is - the boom command doesn't start the kernel. |
| Affected targets: all arm based. |
| |
| Signed-off-by: Ilko Iliev <iliev@ronetix.at> |
| |
| commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Sun Nov 9 00:14:46 2008 +0100 |
| |
| AT91: Enable PLLB for USB |
| |
| At least some (old ?) versions of the AT91Bootstrap do not set up the |
| PLLB correctly to 48 MHz in order to make USB host function correctly. |
| |
| This patch sets up the PLLB to the same values Linux uses, and makes USB |
| work ok on the following CPUs: |
| - AT91CAP9 |
| - AT91SAM9260 |
| - AT91SAM9263 |
| |
| This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all |
| the relevant AT91CAP9/AT91SAM9 atmel boards. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Fri Nov 7 13:55:14 2008 +0100 |
| |
| AT91: Use AT91_CPU_CLOCK in displays |
| |
| Introduce AT91_CPU_CLOCK and use it for displaying the CPU |
| speed in the LCD driver. |
| |
| Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the |
| corresponding board clocks. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 20 11:46:20 2008 +0100 |
| |
| ppc4xx: Clear all potentially pending exceptions in MCSR |
| |
| This is needed on Canyonlands which still has an exception pending |
| while running relocate_code(). This leads to a failure after trap_init() |
| is moved to the top of board_init_r(). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit facdad5f2602e899a01746916beddbf9e856b5ee |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Nov 19 10:10:30 2008 +0100 |
| |
| powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4 |
| Author: Howard Gregory <Greg.Howard@freescale.com> |
| Date: Tue Nov 4 14:55:33 2008 +0800 |
| |
| mpc83xx: Improve the performance of DDR memory |
| |
| modify the CAS timings. my understanding is that these |
| settings decrease various wait times in the DDR interface. |
| Because these wait times are in clock cycles, and the DDR |
| clock on the 8315 RDB runs slower than on some other 83xx |
| platforms, we can dial down these values without a problem, |
| thereby decreasing the latency of memory a little. |
| |
| Signed-off-by: Howard Gregory <Greg.Howard@freescale.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8000b086b33a5a81f3f390f37e178db7956dc08b |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Fri Oct 24 14:55:33 2008 +0200 |
| |
| ARM: Add Apollon UBI support |
| |
| To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI |
| macro. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 694a0b3f1c0accd0de94b89555155d69f8022824 |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 11:47:05 2008 +0100 |
| |
| UBI: Add UBI command support |
| |
| This patch adds these UBI commands: |
| |
| ubi part [nand|onenand] [part] - Show or set current partition |
| ubi info [l[ayout]] -Display volume and UBI layout information |
| ubi create[vol] volume [size] [type] - Create volume name with size |
| ubi write[vol] address volume size - Write volume from address with size |
| ubi read[vol] address volume [size] - Read volume to address with size |
| ubi remove[vol] volume - Remove volume |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 58be3a1056d88c6d05f3e914389282807e69923a |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:38:24 2008 +0100 |
| |
| UBI: Add basic UBI support to U-Boot (Part 8/8) |
| |
| This patch adds basic UBI (Unsorted Block Image) support to U-Boot. |
| It's based on the Linux UBI version and basically has a "OS" |
| translation wrapper that defines most Linux specific calls |
| (spin_lock() etc.) into no-ops. Some source code parts have been |
| uncommented by "#ifdef UBI_LINUX". This makes it easier to compare |
| this version with the Linux version and simplifies future UBI |
| ports/bug-fixes from the Linux version. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9 |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:36:36 2008 +0100 |
| |
| UBI: Add basic UBI support to U-Boot (Part 7/8) |
| |
| This patch adds basic UBI (Unsorted Block Image) support to U-Boot. |
| It's based on the Linux UBI version and basically has a "OS" |
| translation wrapper that defines most Linux specific calls |
| (spin_lock() etc.) into no-ops. Some source code parts have been |
| uncommented by "#ifdef UBI_LINUX". This makes it easier to compare |
| this version with the Linux version and simplifies future UBI |
| ports/bug-fixes from the Linux version. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:32:36 2008 +0100 |
| |
| UBI: Add basic UBI support to U-Boot (Part 6/8) |
| |
| This patch adds basic UBI (Unsorted Block Image) support to U-Boot. |
| It's based on the Linux UBI version and basically has a "OS" |
| translation wrapper that defines most Linux specific calls |
| (spin_lock() etc.) into no-ops. Some source code parts have been |
| uncommented by "#ifdef UBI_LINUX". This makes it easier to compare |
| this version with the Linux version and simplifies future UBI |
| ports/bug-fixes from the Linux version. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c91a719daa331b5856109313371e4ece5ec06d96 |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:28:06 2008 +0100 |
| |
| UBI: Add basic UBI support to U-Boot (Part 5/8) |
| |
| This patch adds basic UBI (Unsorted Block Image) support to U-Boot. |
| It's based on the Linux UBI version and basically has a "OS" |
| translation wrapper that defines most Linux specific calls |
| (spin_lock() etc.) into no-ops. Some source code parts have been |
| uncommented by "#ifdef UBI_LINUX". This makes it easier to compare |
| this version with the Linux version and simplifies future UBI |
| ports/bug-fixes from the Linux version. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:27:23 2008 +0100 |
| |
| UBI: Add basic UBI support to U-Boot (Part 4/8) |
| |
| This patch adds basic UBI (Unsorted Block Image) support to U-Boot. |
| It's based on the Linux UBI version and basically has a "OS" |
| translation wrapper that defines most Linux specific calls |
| (spin_lock() etc.) into no-ops. Some source code parts have been |
| uncommented by "#ifdef UBI_LINUX". This makes it easier to compare |
| this version with the Linux version and simplifies future UBI |
| ports/bug-fixes from the Linux version. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:26:54 2008 +0100 |
| |
| UBI: Add basic UBI support to U-Boot (Part 3/8) |
| |
| This patch adds basic UBI (Unsorted Block Image) support to U-Boot. |
| It's based on the Linux UBI version and basically has a "OS" |
| translation wrapper that defines most Linux specific calls |
| (spin_lock() etc.) into no-ops. Some source code parts have been |
| uncommented by "#ifdef UBI_LINUX". This makes it easier to compare |
| this version with the Linux version and simplifies future UBI |
| ports/bug-fixes from the Linux version. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 961df83361aff9a14f226214224eb8a06e05ba24 |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:25:44 2008 +0100 |
| |
| UBI: Add basic UBI support to U-Boot (Part 2/8) |
| |
| This patch adds basic UBI (Unsorted Block Image) support to U-Boot. |
| It's based on the Linux UBI version and basically has a "OS" |
| translation wrapper that defines most Linux specific calls |
| (spin_lock() etc.) into no-ops. Some source code parts have been |
| uncommented by "#ifdef UBI_LINUX". This makes it easier to compare |
| this version with the Linux version and simplifies future UBI |
| ports/bug-fixes from the Linux version. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f399d4a281713d5ef2d764f05d545fe61e3bd569 |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:23:06 2008 +0100 |
| |
| UBI: Add basic UBI support to U-Boot (Part 1/8) |
| |
| This patch adds basic UBI (Unsorted Block Image) support to U-Boot. |
| It's based on the Linux UBI version and basically has a "OS" |
| translation wrapper that defines most Linux specific calls |
| (spin_lock() etc.) into no-ops. Some source code parts have been |
| uncommented by "#ifdef UBI_LINUX". This makes it easier to compare |
| this version with the Linux version and simplifies future UBI |
| ports/bug-fixes from the Linux version. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79 |
| Author: Kyungmin Park <kyungmin.park@samsung.com> |
| Date: Wed Nov 19 16:20:36 2008 +0100 |
| |
| MTD: Add MTD paritioning infrastructure |
| |
| This MTD part infrastructure will be used by the upcoming |
| UBI support. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9b827cf1720acda2473afa516956eab6f7cca9a1 |
| Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> |
| Date: Thu Oct 16 22:54:03 2008 +0530 |
| |
| Align end of bss by 4 bytes |
| |
| Most of the bss initialization loop increments 4 bytes |
| at a time. And the loop end is checked for an 'equal' |
| condition. Make the bss end address aligned by 4, so |
| that the loop will end as expected. |
| |
| Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3f510db522d160179dff3ddcce9b18f6241c2c24 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Nov 10 19:45:35 2008 -0600 |
| |
| mpc8641: fix address-cells default in old .dts detection |
| |
| address-cells defaults to 2, not 1; so in the unlikely |
| event that it isn't specified, this patch is required |
| for correct operation. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Fri Oct 31 17:14:39 2008 -0500 |
| |
| lib_ppc: Move trap_init to occur earlier |
| |
| Doing trap_init immediately once we're running from RAM |
| means we're no longer dependent on the physical location of |
| the flash on non-BookE platforms. Before trap_init, those |
| platforms switch to real mode and go to 0xfff00100 on exception. |
| After the switch, they go to 0x00000100 This makes it easier to |
| move the flash location. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit d52082b12c6e545705a19433a2f4142526536189 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Fri Nov 7 13:46:19 2008 -0600 |
| |
| mpc8641: Try to detect old .dts files |
| |
| Since we've changed the memory map of the board, be nice and |
| add some checking to try to catch out-of-date .dts files. We do |
| this by checking the CCSRBAR location in the .dts and comparing |
| it to the CCSRBAR location in u-boot. If they don't match, a |
| warning msg is printed. This isn't foolproof, but it's simple and |
| will catch most of the cases where an out-of-date .dts is present, |
| including all of the cases where a new u-boot is used with an old |
| standard MPC8641 .dts file as supplied with Linux. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 8db0400a27839f91c047dcb83f4a0f09e054a180 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Thu Nov 6 13:04:09 2008 -0600 |
| |
| toplevel Makefile: Add MPC8641HPCN_36BIT target |
| |
| This will enable CONFIG_PHYS_36BIT for MPC8641HPCN. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 3111d32c494e8251b90917447796a7206b757e1e |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Thu Nov 6 17:37:35 2008 -0600 |
| |
| mpc8641: Support 36-bit physical addressing |
| |
| This patch creates a memory map with all the devices |
| in 36-bit physical space, in addition to the 32-bit map. |
| The CCSR relocation is moved (again, sorry) to |
| allow for the physical address to be 36 bits - this |
| requires translation to be enabled. With 36-bit physical |
| addressing enabled, we are no longer running with VA=PA |
| translations. This means we have to distinguish between |
| the two in the config file. The existing region name is |
| used to indicate the virtual address, and a _PHYS variety |
| is created to represent the physical address. |
| |
| Large physical addressing is not enabled by default. |
| Set CONFIG_PHYS_64BIT in the config file to turn this on. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit c759a01a0022de9378a3a761f49786f87684c916 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Thu Nov 6 17:36:04 2008 -0600 |
| |
| mpc8641: Change 32-bit memory map |
| |
| The memory map on the 8641hpcn is modified to look more like |
| the 85xx boards; this is a step towards a more standardized |
| layout going forward. As part of this change, we now relocate |
| the flash. |
| |
| The regions for some of the mappings were far larger than they |
| needed to be. I have reduced the mappings to match the |
| actual sizes supported by the hardware. |
| |
| In addition I have removed the comments at the head |
| of the BAT blocks in the config file, rather than updating |
| them. These get horribly out of date, and it's a simple |
| matter to look at the defines to see what they are set to |
| since everything is right here in the same file. |
| |
| Documentation has been changed to reflect the new map, as this |
| change is user visible, and affects the OS which runs post-uboot. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit bf9a8c34309ed9276258295db9e9212aabb2531a |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Nov 5 14:55:35 2008 -0600 |
| |
| mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY |
| |
| We define CONFIG_MONITOR_BASE_EARLY to define the initial location |
| of the bootpage in flash. Use this to create an early mapping |
| definition for the FLASH, and change the early_bats code to use this. |
| |
| This change facilitates the relocation of the flash since the early |
| mappings are no longer tied to the final location of the flash. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Nov 5 14:55:34 2008 -0600 |
| |
| mpc86xx: Use SRR0/1/rfi to enable address translation, not blr |
| |
| Using a mtmsr/blr means that you have to be executing at the |
| same virtual address once you enable translation. This is |
| unnecessarily restrictive, and is not really how this is |
| usually done. Change it to use the more common mtspr SRR0/SRR1 |
| and rfi method. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 6bf98b1362f0cb237620355ed3e6762fff82388d |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Nov 5 14:55:33 2008 -0600 |
| |
| mpc8641: make DIAG_ADDR == FLASH_BASE |
| |
| Currently, that's what it is, but it's hardcoded. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 170deacb1ddc39164bdb68f3963e0c0456a5369b |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Nov 5 14:55:32 2008 -0600 |
| |
| mpc8641: Drop imaginary second flash bank, map 8MB |
| |
| There's a lot of setup and foo for the second flash |
| bank. The problem is, this board doesn't actually have one. |
| Clean this up. Also, the flash is 8M in size. Get rid |
| of the confusing aliased overmapping, and just map 8M. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Nov 5 14:55:31 2008 -0600 |
| |
| mpc8641: only define CONFIG_ENV_SIZE once |
| |
| It's currently defined twice inside in an if/else block, but |
| both halves set the same value. Move the define outside |
| the if. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Nov 5 14:55:30 2008 -0600 |
| |
| mpc86xx: Move setup_bats into cpu_init_f |
| |
| In order to later allow for a physical relocation of the |
| flash, setup_bats, which sets up the final BAT mapping |
| for the board, needs to happen *after* init_laws(). |
| Otherwise, there will be no window programmed for the flash |
| at the new physical location at the point when we change |
| the mmu translation. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Nov 5 14:55:29 2008 -0600 |
| |
| mpc8641: Remove extra "0" from BR2 define |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit edf3fe7d39a1ee07353128af5221422ce9ccfad6 |
| Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> |
| Date: Thu Oct 23 09:08:18 2008 -0400 |
| |
| drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver. |
| |
| Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c. |
| This adds support for PHY-less MAC connections to the UEC. |
| |
| Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 23 16:27:24 2008 +0000 |
| |
| ColdFire: Add mii driver in drivers/net |
| |
| All CF platforms' mii.c are consolidated into one |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 25a859066b3af1070eb69f12022113c0a91bd813 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Mon Oct 27 23:53:17 2008 -0700 |
| |
| Moved initialization of PPC4xx EMAC to cpu_eth_init() |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Nov 9 21:29:23 2008 -0800 |
| |
| Moved PPC4xx EMAC driver to drivers/net |
| |
| Also changed path in all linker scripts that reference this driver |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 96e21f86e8266ed40759e5495ee461265d7f6d28 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Mon Oct 27 23:50:15 2008 -0700 |
| |
| Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC |
| |
| All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Thu Oct 23 22:02:49 2008 -0700 |
| |
| Moved initialization of MPC8XX SCC to cpu_eth_init() |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit a9bec96d6359ac9f90a852962bf3040cad9e0256 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Oct 22 23:47:51 2008 -0700 |
| |
| Moved initialization of MPC8220 FEC to cpu_eth_init() |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Oct 22 23:32:48 2008 -0700 |
| |
| Moved initialization of QE Ethernet controller to cpu_eth_init() |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3456a148276d5494b53ee40242efb6462d163504 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Oct 22 23:20:29 2008 -0700 |
| |
| Moved initialization of FCC Ethernet controller to cpu_eth_init |
| |
| Affected boards: |
| Several MPC8xx boards |
| Several MPC8260/MPC8272 boards |
| Several MPC85xx boards |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 62e15b497f5c6334c059512678c8db7940ae4c61 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Thu Oct 30 22:15:35 2008 -0700 |
| |
| Fix typo in cpu/mpc85xx/cpu.c |
| |
| CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sun Oct 19 12:08:50 2008 +0900 |
| |
| net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init |
| |
| This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init |
| as a part of ongoing eth_initialize cleanup work. The function ret value |
| is also fixed as it should be negative on fail. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit cc94074ecac1885d18ddb683eb934b3c0268aa5b |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Fri Sep 5 01:55:22 2008 -0400 |
| |
| Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init() |
| |
| Also, removed the driver initialization from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f2a7806fc23e82d30c8548911369e0c530607354 |
| Author: Clive Stubbings <uboot@xentech.co.uk> |
| Date: Mon Oct 27 15:05:00 2008 +0000 |
| |
| xilinx_emaclite buffer overrun |
| |
| Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and |
| PKTSIZE_ALIGN bytes long. |
| |
| Acked-by: Michal Simek <monstr@monstr.eu> |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 0115b1953718a2969f6469d3d5da51ba11e12d42 |
| Author: richardretanubun <richardretanubun@ruggedcom.com> |
| Date: Fri Sep 26 08:59:12 2008 -0400 |
| |
| NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg. |
| |
| The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0] |
| This patch makes these function use the devname argument that is passed in to |
| allow access to the phy registers of other devices in devlist[]. |
| |
| Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 44dcb7332033db8de2810f2fffcae3084f15c8d4 |
| Author: richardretanubun <richardretanubun@ruggedcom.com> |
| Date: Mon Oct 6 15:31:43 2008 -0400 |
| |
| Adds two more ethernet interface to 83xx |
| |
| Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info. |
| Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Fri Nov 7 13:54:31 2008 +0100 |
| |
| AT91: Replace AT91_BASE_EMAC by the board specific values. |
| |
| AT91_BASE_EMAC is never used outside the board specific files, |
| so replace its usage by the board specific AT91xxx_BASE_EMAC. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c91e17affa175ce06afa89b04752301eb4a61666 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Fri Nov 7 12:09:21 2008 +0100 |
| |
| AT91: Replace (undefined) AT91_ID_US* by the board specific values. |
| |
| AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined. |
| Since they are never used outside the board specific files, they can |
| be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 / |
| AT91xxx_ID_US2. |
| |
| Bug spotted by Jesus Alvarez <jalvarez@micromint.com>. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 1 10:47:59 2008 +0100 |
| |
| Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1079432e04ccf71aa3684181186182cd63512f19 |
| Author: Sergey Lapin <slapin@ossfans.org> |
| Date: Fri Oct 31 12:28:43 2008 +0100 |
| |
| Custom AFEB9260 board support |
| |
| This patch provides support for AFEB9260 board, a product of |
| OpenSource hardware and software. Some commertial projects |
| are made with this design. A board is basically AT91SAM9260-EK |
| with some modifications and different peripherals and different |
| parts used. Main purpose of this project is to gain experience in |
| hardware design. |
| More info: http://groups.google.com/group/arm9fpga-evolution-board |
| (In Russian only, sorry). |
| Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb |
| |
| Signed-off-by: Sergey Lapin <slapin@ossfans.org> |
| |
| commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00 |
| Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp> |
| Date: Tue Oct 21 13:17:16 2008 +0900 |
| |
| Change to use "do_div" macro |
| |
| Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp> |
| |
| commit e352495318d8056a00faa21b633b3e4374bfbf52 |
| Author: Roman Mashak <romez777@gmail.com> |
| Date: Wed Oct 22 16:00:26 2008 -0400 |
| |
| ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory |
| |
| OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory. |
| It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap |
| |
| Signed-off-by: Roman Mashak <romez777@gmail.com> |
| |
| commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb |
| Author: Roman Mashak <romez777@gmail.com> |
| Date: Tue Oct 21 03:01:41 2008 -0700 |
| |
| ARM/Versatile port: Removed unused functions |
| |
| Removal of never used functions. |
| |
| Signed-off-by: Roman Mashak <romez777@gmail.com> |
| |
| commit 1266df887781c779deaf6d05eea2ef90a470cb34 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Nov 3 15:44:01 2008 -0600 |
| |
| powerpc: change 86xx SMP boot method |
| |
| We put the bootpg for the secondary cpus into memory and use |
| BPTR to get to it. This is a step towards converting to the |
| ePAPR boot methodology. Also, the code is written to |
| deal properly with more than 4GB of RAM. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit b5431560682d8f318fbc49db87cfe13ab41d2ee4 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Fri Oct 31 17:13:49 2008 -0500 |
| |
| 8641HPCN: Config file cleanup |
| |
| There are several items in the config file that were hardcoded |
| but that should really be based on other config options, since |
| the regions are contiguous and depend on being so. This cleans |
| that up a bit. Also, add BR_PHYS_ADDR() macro to convert |
| addresses into the proper format for BR registers. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 4c77de3f144ca088c3867bd6240718c10f5a9d69 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Fri Oct 31 17:13:32 2008 -0500 |
| |
| 86xx: Make dram_size a phys_size_t |
| |
| It's currently a long and should be phys_size_t. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 104992fc541302a6bac74448e01e7fdad20abca0 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Sun Nov 2 18:19:32 2008 -0600 |
| |
| powerpc 86xx: Handle CCSR relocation earlier |
| |
| Currently, the CCSR gets relocated while translation is |
| enabled, meaning we need 2 BAT translations to get to both the |
| old location and the new location. Also, the DEFAULT |
| CCSR location has a dependency on the BAT that maps the |
| FLASH region. Moving the relocation removes this unnecessary |
| dependency. This makes it easier and more intutive to |
| modify the board's memory map. |
| |
| Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same |
| BAT for CCSR space. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Fri Oct 31 17:14:14 2008 -0500 |
| |
| mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build |
| |
| You can't actually have both, and with some coming changes to |
| change the memory map for the board and support 36-bit physical, |
| we need the extra BAT that is being consumed by having both. |
| |
| I also make non-PCI configs build cleanly, for the sake of sanity. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Fri Oct 31 17:14:00 2008 -0500 |
| |
| mpc8641: Stop supporting non-PCI_PNP configs |
| |
| We don't actually ever do this, remove the code so we |
| can stop maintaining it. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Fri Oct 24 12:59:12 2008 +0000 |
| |
| ColdFire: Fix M5329EVB and M5373EVB nand issue |
| |
| Fix compilation issue caused by a few mismatches. |
| Provide proper nand chip select enable/disable in |
| nand_hwcontrol() rather than in board_nand_init() |
| just enable once. Remove redundant local nand driver |
| functions - nand_read_byte(), nand_write_byte() and |
| nand_dev_ready() to use common nand driver. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 1b2708442224a551a0b865b52710306333888932 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Oct 22 11:55:30 2008 +0000 |
| |
| ColdFire: Fix compilation error |
| |
| The error was caused by the change for strmhz() in cpu.c. |
| A few of them were one extra close parenthesis. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 536e7dac16769954915a484e682a2efb28699133 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Oct 22 11:38:21 2008 +0000 |
| |
| ColdFire: Add MCF5301x CPU and M53017EVB support |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a21d0c2cc9add8894d971ab791f4032f077db817 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Oct 21 15:37:02 2008 +0000 |
| |
| ColdFire: Add SBF support for M52277EVB |
| |
| Add serial boot support |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b202816c61042c183fe67d097a5893b0f2dafba0 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Oct 21 14:19:26 2008 +0000 |
| |
| ColdFire: Use CFI driver for M5272C3 |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f3962d3f574e5a1cffacd4e9bc48713060a2a314 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Oct 21 13:47:54 2008 +0000 |
| |
| ColdFire: Relocate FEC's GPIO and mii functions protocols |
| |
| Place FEC pin assignments in cpu_init.c from platform's |
| mii.c |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Oct 21 12:15:44 2008 +0000 |
| |
| ColdFire: Remove platforms mii.c file |
| |
| Will use mcfmii.c driver in drivers/net rather than |
| keep creating new mii.c for each future platform. |
| Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB, |
| M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB, |
| M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's |
| mii.c |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 012522fef3b382469125beb46a315ab4dee02fb0 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Oct 21 10:03:07 2008 +0000 |
| |
| ColdFire: Modules header files cleanup |
| |
| Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG, |
| MDHA, SKHA, INTC, and FlexBus structures and |
| definitions in immap_5xxx.h to more unify modules |
| header files. Append DSPI support for m547x_8x. |
| SSI cleanup. Remove USB Host structure from immap_539.h. |
| Apply changes to use FlexBus structures in mcf52x2's |
| cpu_init.c and platform configuration files. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ac2331aee99ad36be0fcfed8c49922e3c61b576d |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Oct 21 08:52:36 2008 +0000 |
| |
| ColdFire: Remove linker file |
| |
| Each different build for M54455EVB and M5235EVB will |
| create a u-boot.lds linker file. It is redundant to |
| keep the u-boot.lds |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 0829323073c505556ed5f5073f91adb504584d45 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Fri Oct 31 11:26:44 2008 -0500 |
| |
| ppc: Fix compile warnings when !CONFIG_OF_LIBFDT |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit a80b21d5127583171d6e9bc7f722947641898012 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 31 12:12:12 2008 +0100 |
| |
| common/Makefile: create others group for non core, environment and command files |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Oct 31 01:13:37 2008 +0100 |
| |
| TQM8260: use CFI flash driver instead of custom driver. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Thu Oct 30 17:35:30 2008 -0500 |
| |
| Consolidate MAX/MIN definitions |
| |
| There were several, now there is one (two if you count the lower-case |
| versions). |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Oct 30 09:23:09 2008 +0100 |
| |
| mgsuvd: remove unused defines in config file. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Nov 2 16:14:22 2008 +0100 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a47f957ab523019992fdef857af01bd71c58a4da |
| Author: Alessandro Rubini <rubini-list@gnudd.com> |
| Date: Fri Oct 31 22:33:21 2008 +0100 |
| |
| NAND: Allow NAND and OneNAND to coexist |
| |
| This removes in nand.h code that is verbatim duplicated from bbm.h, |
| including directly bbm.h in nand.h. The previous state of affairs |
| prevented compiling code for a board hosting both NAND and OneNAND chips. |
| |
| Reported-by: Scott Wood <scottwood@freescale.com> |
| Signed-off-by: Alessandro Rubini <rubini@unipv.it> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Fri Oct 31 13:51:12 2008 -0500 |
| |
| JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled. |
| |
| Reported-by: Alessandro Rubini <rubini-list@gnudd.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit c57fc28947e248fb03c49a28b467686299895055 |
| Author: Jason Jin <Jason.Jin@freescale.com> |
| Date: Fri Oct 31 05:07:04 2008 -0500 |
| |
| NAND: Add NAND support for MPC8536DS board |
| |
| This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000 |
| for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file. |
| It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image. |
| |
| Singed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 31 05:06:14 2008 -0500 |
| |
| NAND: Fix CONFIG_ENV_ADDR for MPC8572DS |
| |
| CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE). |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 51b572a801be57790fe26adaa530210e7fba59cc |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Oct 24 10:49:48 2008 +0900 |
| |
| sh: rsk7203: Moved rsk7203 board to board/renesas |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 58453b00b3ebb26aaa901210023f99504a90bb00 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Oct 24 10:48:31 2008 +0900 |
| |
| sh: MigoR: Moved MigoR board to board/renesas |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c1da2a22817ba85b437afa2f4e715e658b219fd1 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Oct 24 10:39:44 2008 +0900 |
| |
| sh: r2dplus: Moved r2dplus board to board/renesas |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 78385bf2359d828184d0b3649f7ae6b933420000 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Oct 24 10:36:13 2008 +0900 |
| |
| sh: sh7763rdp: Moved sh7763rdp board to board/renesas |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c6525d459c350bfc246ea7826456af77e1e314eb |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Oct 24 10:35:19 2008 +0900 |
| |
| sh: sh7785lcr: Moved sh7785lcr board to board/renesas |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit acd3e30d09a73f876222f0d496c4f52ee9d0771d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Oct 24 10:34:21 2008 +0900 |
| |
| sh: r7780mp: Moved r7780mp board to board/renesas |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Oct 24 10:32:14 2008 +0900 |
| |
| sh: ap325rxa: Moved ap325rxa board to board/renesas |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad |
| Author: Wolfgang Denk <wd@xpert.denx.de> |
| Date: Fri Oct 31 01:12:28 2008 +0100 |
| |
| CFI Driver: Fix "flash not ready" problem |
| |
| This patch fixes a problem on systems where the NOR flash is attached |
| to a 64 bit bus. The toggle bit detection in flash_toggle() is based |
| on the assumption that the same flash address is read twice without |
| any other interjacent flash accesses. However, on 32 bit systems the |
| function flash_read64() [as currently implemented] does not perform |
| an atomic 64 bit read - instead, this is broken down into two 32 bit |
| read accesses on addresses "addr" and "addr + 4". So instead of |
| reading a 64 bit value twice from "addr", we see a sequence of 4 32 |
| bit reads from "addr", "addr + 4", "addr", and "addr + 4". The |
| consequence is that flash_toggle() fails to work. |
| |
| This patch implements a simple, but somewhat ugly solution, as it |
| avoids the use of flash_read64() in this critical place (by breaking |
| it down manually into 32 bit read operations) instead of rewriting |
| flash_read64() such to perform atomic 64 bit reads as one could |
| expect. However, such a rewrite would require the use of floating |
| point load operations, which becomes pretty complex: |
| |
| save MSR; |
| set Floating Point Enable bit in MSR; |
| use "lfd" instruction to perform atomic 64 bit read; |
| use "stfd" to store value to temporary variable on stack; |
| load u64 value from temporary variable; |
| restore saved MSR; |
| return u64 value; |
| |
| The benefit-cost ratio of such an implementation was considered too |
| bad to actually attempt this, especially as we can expect that such |
| an implementation would not only have a bigger memory footprint but |
| also cause a performance degradation. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cdd4fe63b094d4b767f12ff241d72566b461ee61 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 31 10:48:08 2008 +0100 |
| |
| ppc4xx: Fix spelling error in MAINTAINERS file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit be270798900b75ad9c47c7b79c72f70441196c56 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 28 13:37:00 2008 +0100 |
| |
| ppc4xx: Update PMC440 board support |
| |
| This patch brings PMC440 board support up to date: |
| |
| - fix GPIO configuration |
| - add misc_init_f() |
| - use better values for usbact variable |
| - fix USB 2.0 phy reset sequence |
| - shrink BAR2 to save PCI address space |
| - add FDT support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 75183b1a7fc04206d9779d13f16e03853d7e965d |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 28 13:36:59 2008 +0100 |
| |
| ppc4xx: Fix PMC440 BSP commands |
| |
| This patch fixes the PMC440 BSP commands painit and selfreset |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 76b565b69f886d5ae748db65e44f464b0e70d41a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 28 13:36:58 2008 +0100 |
| |
| ppc4xx: Update PMC440 board configuration |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 28 13:36:57 2008 +0100 |
| |
| ppc4xx: Fix esd loadpci command |
| |
| This patch fixes esd's loadpci command when not all |
| memory on adapter boards is accessable via PCI. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 492aa9ea13791ca4591b5bde895a425e27ae2d10 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 28 13:36:56 2008 +0100 |
| |
| ppc4xx: Clean up PMC440 header |
| |
| -Codingstyle cleanup |
| -Remove unused GPIO define |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 295133258a44f97a57fb2ec339aecfda11f4db95 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 28 13:36:55 2008 +0100 |
| |
| ppc4xx: Handle other board variant in PMC440 FPGA code |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Mon Oct 27 12:35:59 2008 +0100 |
| |
| ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg |
| |
| Xilinx ppc440 and ppc405 have many similarities. This patch merge the |
| config files of both infrastuctures |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 25 06:45:31 2008 +0200 |
| |
| ppc4xx: Correctly configure the GPIO pin muxing on Arches |
| |
| Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO |
| pin multiplexing correctly |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Oct 30 23:22:04 2008 +0100 |
| |
| Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX) |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 4bc7deee9095f21e243b724ca3d634251c1d5432 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Wed Oct 29 23:27:45 2008 -0500 |
| |
| libfdt: Fix bug in fdt_subnode_offset_namelen() |
| |
| There's currently an off-by-one bug in fdt_subnode_offset_namelen() |
| which causes it to keep searching after it's finished the subnodes of |
| the given parent, and into the subnodes of siblings of the original |
| node which come after it in the tree. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f242a08871839eac081ba5b599af979f3a148a0d |
| Author: Peter Korsgaard <jacmet@sunsite.dk> |
| Date: Tue Oct 28 08:26:52 2008 +0100 |
| |
| fdt_resize(): ensure minimum padding |
| |
| fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry |
| (16 bytes), so make sure that fdt_resize at least adds that much |
| padding, no matter what the location or size of the fdt is. |
| |
| Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d685b74c64a38849f1a129b3ab846fbf67dd937e |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Thu Oct 23 21:59:35 2008 +0800 |
| |
| 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache |
| |
| The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7 |
| |
| mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache |
| |
| This is needed in unlock_ram_in_cache() because it is called from C and |
| will corrupt the small data area anchor that is kept in R2. |
| |
| lock_ram_in_cache() is modified similarly as good coding practice, but |
| is not called from C. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| |
| also, the r2 is used as global data pointer. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit e053ab1903ccae6048ef759025b9f675bba91450 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Tue Oct 28 11:45:04 2008 -0500 |
| |
| mpc83xx pci: Round up memory size in inbound window. |
| |
| The current calculation will fail to cover all memory if |
| its size is not a power of two. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 1c671977dc81359628be27ac99c174e76e8069ba |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Thu Oct 23 21:19:13 2008 +0800 |
| |
| 86xx: remove the unused definition |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit eaa44c5dc83756c3067b9e6c9db626facd0b0660 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 28 17:47:49 2008 +0800 |
| |
| 86xx: remove the redundant r2 global data pointer save |
| |
| The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add |
| the another global data pointer save, but in fact the |
| global data pointer will be initialized in the board_init_r, |
| so remove it such as the 85xx/83xx family. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Acked-by: Kumar Gala <kumar.gala@freescale.com> |
| |
| commit bd888e9544419665334a6f47f81f34011cea38f3 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 28 17:47:41 2008 +0800 |
| |
| 86xx: remove the unused code for 86xx family |
| |
| I believe these code was copied from 74xx family, but for |
| 86xx, it is unused. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Acked-by: Kumar Gala <kumar.gala@freescale.com> |
| |
| commit 5ba1ef507402bc5e344dc374203792a40f222e8a |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 28 17:46:35 2008 +0800 |
| |
| 86xx: remove the second DDR LAW setting for mpc8641hpcn |
| |
| The DDR1 LAW will precedence the DDR2 LAW, so remove |
| the second DDR LAW. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Acked-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 137a2dfd11ac51ae3154f13f323609b33a4a072e |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 28 17:46:23 2008 +0800 |
| |
| 86xx: remove the unused ddr_enable_ecc in the board file |
| |
| The DDR controller of 86xx processors have the ECC data init |
| feature, and the new DDR code is using the feature, we don't |
| need the way with DMA to init memory again. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Acked-by: Kumar Gala <kumar.gala@freescale.com> |
| |
| commit dc2adad85bf580d65916c940683f6e9671e8a5dd |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 28 17:46:12 2008 +0800 |
| |
| 86xx: Move the clear_tlbs before MMU turn on |
| |
| We must invalidate TLBs before MMU turn on, but |
| currently the code is not, if there are some stale |
| TLB entry valid in the TLBs, it will cause strange |
| issue. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Acked-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 5cdade07b118d07154cb882650f9778cecc8a87c |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Oct 27 15:57:08 2008 -0500 |
| |
| mpc8313erdb: Document NAND boot. |
| |
| Previously, the documentation claimed that NAND boot is not supported. |
| This is no longer true. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Oct 29 14:20:26 2008 -0500 |
| |
| NAND: Properly create JFFS2 cleanmarkers. |
| |
| As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean" |
| command is currently broken, and among other things causes all blocks |
| to be marked bad. |
| |
| This implements it properly using MTD_OOB_AUTO, along with some |
| indentation fixes. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit f7fe57c09866b44692d18c8cf22828bd137ec58d |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Oct 29 13:42:41 2008 -0500 |
| |
| NAND fsl elbc: Set FMR[ECCM] based on page size. |
| |
| Hardware expects ECCM 0 for small page and ECCM 1 for large page |
| when booting from NAND, so use those defaults. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit c013b74975dab0805ef6d369b013230c4e8a660d |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Oct 29 13:32:59 2008 -0400 |
| |
| NAND: Add support for MPC8572DS board |
| |
| This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns |
| 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in |
| config file. |
| |
| It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to |
| make room for the increased code size with NAND enabled. |
| |
| Signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Oct 29 11:05:55 2008 -0400 |
| |
| Make Freescale local bus registers available for both 83xx and 85xx. |
| |
| - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it |
| can be shared by both 83xx and 85xx |
| - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards |
| files which use lbus83xx_t. |
| - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that |
| 85xx can share them. |
| |
| Signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 695c130e4bf75b444720ddfd83aca88f41c046cf |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Oct 27 15:38:30 2008 -0500 |
| |
| NAND: Align right column of the shorthelp with other commands. |
| |
| I accidentally broke this in when making consistent the partial |
| alignment of the longhelp. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 33efde5ecac91ab118ff00b95a181fd6d75f8645 |
| Author: Karl Beldan <karl.beldan@gmail.com> |
| Date: Mon Sep 15 16:08:03 2008 +0200 |
| |
| NAND: Reset chip on power-up |
| |
| Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx). |
| The first command sent is NAND_CMD_READID. |
| Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id. |
| Tested with an MT29F4G08AAC. |
| |
| Signed-off-by: Karl Beldan <karl.beldan@gmail.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit c45912d8abc52de796b9059a58faf7c4166eab58 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Fri Oct 24 16:20:43 2008 -0500 |
| |
| NAND: sync with 2.6.27 |
| |
| This brings the core NAND code up to date with the Linux kernel. |
| |
| Since there were several drivers in Linux as of the last update that are |
| not in u-boot, I'm not bringing over new drivers that have been added |
| since in the absence of an interested party. |
| |
| I did not update OneNAND since it was recently synced by Kyungmin Park, |
| and I'm not sure exactly what the common ancestor is. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit b1d0db1805c3395149777e507b6da53410abac4e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 17:25:47 2008 -0500 |
| |
| bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS} |
| |
| Added the ability to config out bootm support for Linux, NetBSD, RTEMS |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5a98127d81a6eefc5a78a704df619bfe362eeb87 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 17:25:46 2008 -0500 |
| |
| bootm: support subcommands in linux ppc bootm |
| |
| Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 49c3a861d11735838f1f1b11999ce433006dc919 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 17:25:45 2008 -0500 |
| |
| bootm: Add subcommands |
| |
| Add the ability to break the steps of the bootm command into several |
| subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go. |
| |
| This allows us to do things like manipulate device trees before |
| they are passed to a booting kernel or setup memory for a secondary |
| core in multicore situations. |
| |
| Not all OS types support all subcommands (currently only start, loados, |
| ramdisk, fdt, and go are supported). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit be08315933537f061bc1ce61f33a29c56458bbad |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 17:25:44 2008 -0500 |
| |
| bootm: Move to using a function pointer table for the boot os function |
| |
| This removes a bit of code and makes it easier for the upcoming sub bootm |
| command support to call into the proper OS specific handler. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a369f4a492fa2805d87775d27380f0eeaca35aa6 |
| Author: Graeme Russ <graeme.russ@gmail.com> |
| Date: Mon Sep 29 23:03:14 2008 +1000 |
| |
| i386: Renamed show_boot_progress in assembler code |
| |
| Renamed show_boot_progress in assembler init phase to |
| show_boot_progress_asm to avoid link conflicts with C version |
| |
| Signed-off-by: Graeme Russ <graeme.russ@gmail.com> |
| |
| commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Oct 27 16:42:00 2008 -0500 |
| |
| 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask |
| |
| The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx |
| processors have a 3-bit wide IO_SEL field but have the most |
| significant bit is wired to 0 so this change should not affect |
| them. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit cd4251624205cb97104f6e32679dc7754934f711 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Oct 27 16:09:42 2008 -0500 |
| |
| powerpc: fix pci window initialization to work with > 4GB DRAM |
| |
| The existing code has a few errors that need to be fixed in |
| order to support large RAM sizes. Fix those, and add a |
| comment to make it clearer. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 219542a1a66ca017b12860920714a9859b18a5d7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Oct 27 13:16:20 2008 -0500 |
| |
| pci/fsl_pci_init: Removed a bunch pointless trailing backslashes. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 6b59e03e0237a40a2305ea385defdfd92000978b |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon Sep 1 16:21:22 2008 +0200 |
| |
| lcd: Let the board code show board-specific info |
| |
| The information displayed when CONFIG_LCD_INFO is set is inherently |
| board-specific, so it should be done by the board code. The current code |
| dealing with this only handles two cases, and is already a horrible mess |
| of #ifdeffery. |
| |
| Yes, this duplicates some code, but it also allows boards to print more |
| board-specific information; this used to be very difficult. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 6f93d2b8fca504200a5758f7c6dd2d6852900765 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon Sep 1 16:21:21 2008 +0200 |
| |
| lcd: Set lcd_is_enabled before clearing the screen |
| |
| This allows the logo/info rendering routines to use the regular |
| lcd_putc/lcd_puts/lcd_printf calls. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon Sep 1 16:21:20 2008 +0200 |
| |
| lcd: Implement lcd_printf() |
| |
| lcd_printf() has a prototype in include/lcd.h but no implementation. Fix |
| this by borrowing the lcd_printf() implementation from the cogent board |
| code (which appears to use its own LCD framework.) |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon Sep 1 16:21:19 2008 +0200 |
| |
| atmel_lcdfb: Straighten out funky vl_sync logic |
| |
| If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED, |
| otherwise we don't. WTF? |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon Sep 1 16:21:18 2008 +0200 |
| |
| atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h> |
| |
| atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It |
| includes a file that does, asm/arch/gpio.h, but this file doesn't |
| include <asm/arch/hardware.h> like it's supposed to. |
| |
| Add the missing include to asm/arch/gpio.h and remove the workaround |
| from the atmel_lcdfb driver. This makes the driver compile on avr32. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 22 14:38:55 2008 -0500 |
| |
| 86xx: Convert all fsl_pci_init users to new APIs |
| |
| Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use |
| fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). |
| |
| With these changes the board code is a bit smaller and we get dma-ranges |
| set in the device tree for these boards. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 08:28:33 2008 -0500 |
| |
| 85xx: Convert all fsl_pci_init users to new APIs |
| |
| Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS, |
| MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows() |
| and ft_fsl_pci_setup(). |
| |
| With these changes the board code is a bit smaller and we get dma-ranges |
| set in the device tree for these boards. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| |
| commit a2aab460727e5f674353a83a81000ef794bffcae |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 23 00:01:06 2008 -0500 |
| |
| pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| |
| commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 22 14:06:24 2008 -0500 |
| |
| pci/fsl_pci_init: Add a common PCI inbound setup function |
| |
| Add a common setup function that determines the pci_region(s) based |
| on how much memory we have in the system. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| |
| commit 612ea01018a459234d54ed57ec6a5a244ce75678 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 10:13:14 2008 -0500 |
| |
| pci/fsl_pci_init: Enable larger address and setting inbound windows properly |
| |
| * PCI Inbound window was setup incorrectly. The PCI address and system |
| address were swapped. The PCI address should be setting piwar/piwbear |
| and the system address should be setting pitar. |
| |
| * Removed masking of addresses to allow for system address to support |
| system address & PCI address >32-bits |
| |
| * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses |
| |
| * Respect the PCI_REGION_PREFETCH for inbound windows |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| |
| commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 22 23:33:56 2008 -0500 |
| |
| fdt: Added helper to set PCI dma-ranges property |
| |
| Added fdt_pci_dma_ranges() that parses the pci_region info from the |
| struct pci_controller and populates the dma-ranges based on it. |
| |
| The max # of windws/dma-ranges we support is 3 since on embedded |
| PowerPC based systems this is the max number of windows. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| |
| commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 23 00:05:47 2008 -0500 |
| |
| fdt: Add fdt_getprop_u32_default helpers |
| |
| Add helper functions to return find a node and return it's property |
| or a default value. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 18:06:15 2008 -0500 |
| |
| 86xx: Enable 64-bit PCI resources on all Freescale boards |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| |
| commit 0151cbaccf4504821ecfde0217299bd740086bb6 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 11:33:58 2008 -0500 |
| |
| 85xx: Enable 64-bit PCI resources on all Freescale boards |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| |
| commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 21 08:36:08 2008 -0500 |
| |
| pci: Allow for PCI addresses to be 64-bit |
| |
| PCI bus is inherently 64-bit. While not all system require access to |
| the full 64-bit PCI address range some do. This allows those systems |
| to enable the full PCI address width via CONFIG_SYS_PCI_64BIT. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> |
| Acked-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ae5f943ba8ede448a4b1a145fd8911856701ecc5 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Thu Oct 23 21:18:53 2008 +0800 |
| |
| 85xx: Fix the incorrect register used for DDR erratum1 |
| |
| The 8572 DDR erratum1: |
| DDR controller may enter an illegal state when operating |
| in 32-bit bus mode with 4-beat bursts. |
| |
| Description: |
| When operating with a 32-bit bus, it is recommended that |
| DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used. |
| This forces the DDR controller to use 4-beat bursts when |
| communicating to the DRAMs. However, an issue exists that |
| could lead to data corruption when the DDR controller is |
| in 32-bit bus mode while using 4-beat bursts. |
| |
| Projected Impact: |
| If the DDR controller is operating in 32-bit bus mode with |
| 4-beat bursts, then the controller may enter into a bad state. |
| All subsequent reads from memory is corrupted. |
| Four-beat bursts with a 32-bit bus only is used with DDR2 memories. |
| Therefore, this erratum does not affect DDR3 mode. |
| |
| Work Arounds: |
| To work around this issue, software must set DEBUG_1[31] in |
| DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1 |
| and CCSRBAR offset + 0x6f00 for DDR_2). |
| |
| Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2 |
| as condition, but it should be DDR_SDRAM_CFG register. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit d5b693090ed08d24c18491df9d8fc7387b2906f3 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Thu Oct 23 21:17:19 2008 +0800 |
| |
| 85xx: remove unused config definition |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 0f060c3bf82832331a509f2e5d2442539e7aad09 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 23 01:47:38 2008 -0500 |
| |
| 85xx: Add basic e500mc core support |
| |
| Introduce CONFIG_E500MC to deal with the minor differences between |
| e500v2 and e500mc. |
| |
| * Certain fields of HID0/1 don't exist anymore on e500mc |
| * Cache line size is 64-bytes on e500mc |
| * reset value of PIR is different |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 23 01:47:37 2008 -0500 |
| |
| 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number |
| |
| Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle |
| e500mc's 64-byte cacheline properly when it gets added. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5deb8022c3749faac30e9ad9694691e2442b5c93 |
| Author: Georg Schardt <schardt@team-ctech.de> |
| Date: Fri Oct 24 13:51:52 2008 +0200 |
| |
| ppc4xx: New board avnet fx12 minimodul |
| |
| This patch adds support for the avnet fx12 minimodul. |
| It needs the "ppc4xx: Generic architecture for xilinx ppc405" |
| patch from Ricardo. |
| |
| Signed-off-by: Georg Schardt <schardt@team-ctech.de> |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Tue Oct 21 18:29:46 2008 +0200 |
| |
| ppc4xx: Generic architecture for xilinx ppc405(v3) |
| |
| As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx |
| ppc440 boards, this patch presents a common architecture for all the |
| xilinx ppc405 boards. |
| |
| Any custom xilinx ppc405 board can be added very easily with no code |
| duplicity. |
| |
| This patch also adds a simple generic board, that can be used on almost |
| any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h |
| |
| This patch is prepared to work with the latest version of EDK (10.1) |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 485c00a57fab86f72a3769480c66bf1ca22e1459 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 24 08:56:09 2008 +0200 |
| |
| ppc4xx: Disable DDR2 autocalibration on Kilauea for now |
| |
| Since the new autocalibration still has some problems on some Kilauea |
| boards with 200MHz DDR2 frequency we disable the autocalibration and |
| use the hardcoded values as done before. This seems to work reliably |
| on all known DDR2 frequencies. |
| |
| After the autocalibration issue is fixed we will enable it again. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f177f4250c729727b1629fa8d8d6556c999e9b8c |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Wed Apr 9 02:02:07 2008 -0400 |
| |
| Blackfin: fix up UART status bit handling |
| |
| Some Blackfin UARTs are read-to-clear while others are write-to-clear. |
| This can cause problems when we poll the LSR and then later try and handle |
| any errors detected. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Oct 11 20:42:17 2008 -0400 |
| |
| Blackfin: bf561-ezkit: drop redundant code |
| |
| Common Blackfin code already announces CPU information. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Oct 11 20:43:10 2008 -0400 |
| |
| Blackfin: bf561-ezkit: drop pointless USB code |
| |
| The USB/LAN register settings are not actually used/needed in order to |
| drive things from U-Boot, so drop the code. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Oct 11 20:47:58 2008 -0400 |
| |
| Blackfin: linker scripts: force start.o and set initcode boundaries |
| |
| Make sure that the start.o object is always the first object in our linker |
| script regardless of configuration settings, and add some linker symbols |
| so the ldr utility can properly locate the initcode when generating a LDR. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Oct 11 21:19:39 2008 -0400 |
| |
| Blackfin: small cpu init optimization while setting interrupt mask |
| |
| Use the sti instruction to set the initial interrupt mask rather than |
| banging on the core IMASK MMR to save both space and time. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 960922291c9594acb575cec7e47d7bed9b58182c |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Oct 11 21:18:10 2008 -0400 |
| |
| Blackfin: set initial stack correctly according to Blackfin ABI |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Apr 20 03:11:53 2008 -0400 |
| |
| Blackfin: make baud calculation more accurate |
| |
| We should use the algorithm in the Linux kernel so that the UART divisor |
| calculation is more accurate. It also fixes problems on some picky UARTs |
| that have sampling anomalies. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Oct 6 04:21:41 2008 -0400 |
| |
| Blackfin: decode hwerrcause/excause when crashing |
| |
| Having to decode hwerrcause/excause values is a pain, so automate it. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 2de95bb20c488f20298df6881b700a5a757ee780 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Oct 6 04:20:54 2008 -0400 |
| |
| Blackfin: fix register dump messages |
| |
| Make sure we report RETI/IPEND correctly. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Oct 6 04:19:34 2008 -0400 |
| |
| Blackfin: don't bother displaying reboot msg when crashing |
| |
| The hang function already tells you to reboot, so no point in showing it |
| twice. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Jun 1 01:23:48 2008 -0400 |
| |
| Blackfin: enable support for nested interrupts |
| |
| During cpu init, make sure we initialize the CEC properly so that |
| interrupts can fire and be handled while U-Boot is running. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 39782727e185860faa4884c2b04e84cb33d1c6cf |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Oct 6 03:55:25 2008 -0400 |
| |
| Blackfin: init NAND before relocating env |
| |
| If booting out of NAND, we need to make sure we initialize it properly |
| before attempting to relocate the environment. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 0f9a8819416ba40a53de50af148847a0e508f84d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 18:40:13 2008 -0400 |
| |
| Blackfin: check cache bits, not cplb bits |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 17:52:59 2008 -0400 |
| |
| Blackfin: drop unused cache flush code |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 50f0d211912a648e31aa9123b4665a0444bb8ca9 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 15:21:47 2008 -0400 |
| |
| Blackfin: unify cache handling code |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 3c8798983403cb68a827d7a0d09b1134524a1b7d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Oct 6 03:39:07 2008 -0400 |
| |
| Blackfin: only initialize the RTC when actually used |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 621e579b812dd1a2e6777f7cbf6e55e736505823 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Oct 6 03:44:33 2008 -0400 |
| |
| Blackfin: fix SWRST register definition |
| |
| The SWRST register is a 16bit, not 32bit, register. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 18:54:57 2008 -0400 |
| |
| Blackfin: build with -fomit-frame-pointer |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit adbfeeb7b32f737a9738daa583350d2bb9ed017a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 17:50:26 2008 -0400 |
| |
| Blackfin: document some of the blackfin directories |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit e4337968e43698a68ba608369f46d4a4114111ca |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 15:16:56 2008 -0400 |
| |
| Blackfin: only enable hardware error irq by default |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 13:36:43 2008 -0400 |
| |
| Blackfin: punt old unused mem_init.h header |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit bcc121a01608042066a19ab5bff5bcfb805bf406 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 13:18:55 2008 -0400 |
| |
| Blackfin: delete unused page_descriptor_table_size define |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 13:17:03 2008 -0400 |
| |
| Blackfin: fix typo in boot mode comment and add NAND define |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c |
| Author: Ben Maan <moo@cow> |
| Date: Thu Aug 7 13:14:21 2008 -0400 |
| |
| Blackfin: fix port mux defines for BF54x |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 0656ef2ba274910d31364fe022f6c7db0051660d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 13:09:50 2008 -0400 |
| |
| Blackfin: update anomaly lists |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 50ca95402876cf7bac4e2d4f7855f616a038763f |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Aug 7 13:08:54 2008 -0400 |
| |
| Blackfin: unify DSPID/DBGSTAT MMR definitions |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 21 15:53:51 2008 +0200 |
| |
| Fix strmhz(): avoid printing negative fractions |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4a7f6b750d8de543fdf8e58acd86745010054571 |
| Author: Richard Retanubun <RichardRetanubun@ruggedcom.com> |
| Date: Fri Oct 17 08:55:51 2008 -0400 |
| |
| mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function |
| |
| This is done to allow other 83XX based platforms which also have UPM |
| (e.g. 8360) to configure and use their UPM in u-boot. |
| |
| Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3bf1be3c0cfb1129b68cc1474119e5f323536488 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Tue Oct 14 22:58:53 2008 +0400 |
| |
| mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS |
| |
| With this patch u-boot can fixup the dr_mode and phy_type properties |
| for the Dual-Role USB controller. |
| |
| While at it, also remove #ifdefs around includes, they are not needed. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b3379f3fd13969934c00097c05754e7a8990fd39 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Oct 8 20:52:54 2008 +0400 |
| |
| mpc83xx: add ELBC NAND support for the MPC837XEMDS boards |
| |
| Though NAND chip is replaceable on the MPC837XE-MDS boards, the |
| current settings don't work with the default chip on the board. |
| Nevertheless Freescale's U-Boot sets the option register correctly, |
| so I just dumped the register from the working u-boot. My guess is |
| that the old settings were applicable for some pilot boards, not |
| found in the production. |
| |
| This patch also enables FSL ELBC driver so that we could access |
| the NAND storage in the u-boot. |
| |
| The NAND support costs about 45KB, so the u-boot no longer fits |
| into two 128KB NOR flash sectors, thus we also have to adjust |
| environment location: add another 128KB to the monitor length. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| It is due to hardware design and logic defect, that is the |
| I/O[0:7] of NAND chip is connected to LAD[7:0], so when |
| the NAND chip connected to nLCS3, you have to set up the |
| OR3[BCTLD] = '1' for normal operation, otherwise it will have |
| bus contention due to the pin 48/25 of U60 is enabled. |
| |
| Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not |
| asserted upon access to the NAND chip, keep the default state. |
| |
| Acked-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu Oct 2 19:17:33 2008 +0400 |
| |
| mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards |
| |
| The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB, |
| standalone or acting as a PCI agent. User's Guide says: |
| |
| - When the CPLD recognizes its location on the PIB it automatically |
| configures RCW to the PCI Host. |
| - If the CPLD fails to recognize its location then it is automatically |
| configured as an Agent and the PCI is configured to an external arbiter. |
| |
| This sounds good. Though in the standalone setup the CPLD sets PCI_HOST |
| flag (it's ok, we can't act as PCI agents since we receive CLKIN, not |
| PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without |
| any arbiter bad things will happen (here the board hangs during any config |
| space reads). |
| |
| In this situation we must disable the PCI. And in case of anybody really |
| want to use an external arbiter, we provide "pci_external_aribter" |
| environment variable. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu Oct 2 18:32:25 2008 +0400 |
| |
| mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards |
| |
| This involves configuring the SerDes and fixing up the flags and |
| PHY addresses for the TSECs. |
| |
| For Linux we also fix up the device tree. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu Oct 2 18:31:59 2008 +0400 |
| |
| mpc83xx: add TSECs' HRCWH masks for MPC837x processors |
| |
| We'll use these masks to parse TSEC modes out of HRCWH. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu Oct 2 18:31:56 2008 +0400 |
| |
| mpc83xx: serdes: add forgotten shifts for rfcks |
| |
| The rfcks should be shifted by 28 bits left. We didn't notice the bug |
| because we were using only 100MHz clocks (for which rfcks == 0). |
| |
| Though, for SGMII we'll need 125MHz clocks. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 55c531984dcf933e4cd13a187a7e08e873b7ced1 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu Oct 2 18:31:53 2008 +0400 |
| |
| mpc83xx: fix serdes setup for the MPC8378E boards |
| |
| MPC837xE specs says that SerDes1 has: |
| |
| — Two lanes running x1 SGMII at 1.25 Gbps; |
| — Two lanes running x1 SATA at 1.5 or 3.0 Gbps. |
| |
| And for SerDes2: |
| |
| — Two lanes running x1 PCI Express at 2.5 Gbps; |
| — One lane running x2 PCI Express at 2.5 Gbps; |
| — Two lanes running x1 SATA at 1.5 or 3.0 Gbps. |
| |
| The spec also explicitly states that PEX options are not valid for |
| the SD1. |
| |
| Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX, |
| which is wrong to do. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5c2ff323a94e27e481f70c44838d43fcd844dd46 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Sep 10 18:12:37 2008 +0400 |
| |
| mpc83xx: mpc8360emds: rework LBC SDRAM setup |
| |
| Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes |
| it difficult to use (b/c then the memory is discontinuous and |
| there is quite big memory hole between the DDR/SDRAM regions). |
| |
| This patch reworks LBC SDRAM setup so that now we dynamically |
| place the LBC SDRAM near the DDR (or at 0x0 if there isn't any |
| DDR memory). |
| |
| With this patch we're able to: |
| |
| - Boot without external DDR memory; |
| - Use most "DDR + SDRAM" setups without need to support for |
| sparse/discontinuous memory model in the software. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit def0819e920b05b34b56d8b42e1e43d9b89a52d6 |
| Author: Wolfgang Denk <wd@xpert.denx.de> |
| Date: Tue Oct 21 11:23:56 2008 +0200 |
| |
| FDT: don't use private kernel header files |
| |
| On some systems (for example Fedora Core 4) U-Boot builds with the |
| following wanrings only: |
| |
| ... |
| In file included from /home/wd/git/u-boot/include/libfdt_env.h:33, |
| from fdt.c:51: |
| /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! |
| |
| This patch fixes this problem. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f4d14c55504ce40287321bd63ee269e3233ee4ae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 13 15:15:31 2008 +0200 |
| |
| ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 43cbce69d48d052574d71f50724be546d90a46a4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 13 10:45:14 2008 +0200 |
| |
| ppc4xx: Correctly setup ranges property in ebc node |
| |
| Previously only the NOR flash mapping was written into the ranges |
| property of the ebc node. This patch now writes all enabled chip |
| select areas into the ranges property. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d7b26d58328f137471ea97de382bfa63f7239931 |
| Author: Dirk Eibach <eibach@gdsys.de> |
| Date: Wed Oct 8 15:37:50 2008 +0200 |
| |
| ppc4xx: Add GDSys neo 405EP board support |
| |
| Signed-off-by: Dirk Eibach <eibach@gdsys.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Oct 1 14:46:13 2008 +0200 |
| |
| ppc4xx: Update configs for Netstal boards |
| |
| I reorganized my config files, putting the common stuff into netstal-common.h |
| (got the idea by looking a amcc-common.h from Stefan). |
| |
| Added stuff to boot the new powerpc linux via NFS (only tested with HCU4). |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15 |
| Author: Adam Graham <agraham@amcc.com> |
| Date: Wed Oct 8 10:13:19 2008 -0700 |
| |
| ppc4xx: Add routine to retrieve CPU number |
| |
| Provide a weak defined routine to retrieve the CPU number for |
| reference boards that have multiple CPU's. Default behavior |
| is the existing single CPU print output. Reference boards with |
| multiple CPU's need to provide a board specific routine. |
| See board/amcc/arches/arches.c for an example. |
| |
| Signed-off-by: Adam Graham <agraham@amcc.com> |
| Signed-off-by: Victor Gallardo <vgallardo@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 59217bae40e90982ab5400d849c08af683ace036 |
| Author: Adam Graham <agraham@amcc.com> |
| Date: Wed Oct 8 10:13:14 2008 -0700 |
| |
| ppc4xx: Add static support for 44x IBM SDRAM Controller |
| |
| This patch add the capability to configure a PPC440 based IBM SDRAM |
| Controller with static, compiled-in, values. PPC440 memory subsystem |
| includes a Memory Queue core. |
| |
| Signed-off-by: Adam Graham <agraham@amcc.com> |
| Signed-off-by: Victor Gallardo <vgallardo@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f09f09d3899017aaaa2b031bba63c271e9c48e4d |
| Author: Adam Graham <agraham@amcc.com> |
| Date: Wed Oct 8 10:12:53 2008 -0700 |
| |
| ppc4xx: Add AMCC Arches board support (dual 460GT) |
| |
| The Arches Evaluation board is based on the AMCC 460GT SoC chip. |
| This board is a dual processor board with each processor providing |
| independent resources for Rapid IO, Gigabit Ethernet, and serial |
| communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR |
| FLASH, UART, EEPROM and temperature sensor, along with a shared debug |
| port. The two 460GT's will communicate with each other via shared |
| memory, Gigabit Ethernet and x1 PCI-Express. |
| |
| Signed-off-by: Adam Graham <agraham@amcc.com> |
| Signed-off-by: Victor Gallardo <vgallardo@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3 |
| Author: Wolfgang Denk <wd@xpert.denx.de> |
| Date: Sun Oct 19 21:54:30 2008 +0200 |
| |
| TQM8260: environment in flash instead EEPROM, baudrate 115k |
| |
| Several customers have reported problems with the environment in |
| EEPROM, including corrupted content after board reset. Probably the |
| code to prevent I2C Enge Conditions is not working sufficiently. |
| |
| We move the environment to flash now, which allows to have a backup |
| copy plus gives much faster boot times. |
| |
| Also, change the default console initialization to 115200 bps as used |
| on most other boards. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Sun Oct 19 12:49:19 2008 -0500 |
| |
| 85xx: Fix compile warning in mpc8536ds.c |
| |
| mpc8536ds.c: In function 'is_sata_supported': |
| mpc8536ds.c:615: warning: unused variable 'devdisr' |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8ed44d91c8122d00368523b0b746691c895d3b3c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 19 02:35:50 2008 +0200 |
| |
| Cleanup: fix "MHz" spelling |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 19 02:35:49 2008 +0200 |
| |
| Use strmhz() to format clock frequencies |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 19 02:35:48 2008 +0200 |
| |
| strmhz(): Round numbers when printing clock frequencies |
| |
| Round clock frequencies for printing. |
| |
| Many boards printed off clock frequencies like 399 MHz instead of the |
| exact 400 MHz because numberes were not rounded. This is fixed now. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 681c02d05b29c6d46093525052c74b9c4ddc8b08 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Oct 20 15:16:47 2008 -0500 |
| |
| 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG |
| |
| Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot |
| to add a comment that the correct value disagrees with the 8544 reference |
| manual. The changelog for that commit is also wrong, as it says "bit 28" |
| when it should be "bit 24". |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 360fe71e82b83e264c964c9447c537e9a1f643c8 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 18:24:06 2008 +0200 |
| |
| mgcoge: add redundant environment sector |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 18:23:27 2008 +0200 |
| |
| mgsuvd: update size of environment |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2e26d837f11460c0e6dede7d65424a31e0183d09 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 10 11:41:00 2008 +0800 |
| |
| Enabled the Freescale SGMII riser card on 8536DS |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55 |
| Author: Liu Yu <yu.liu@freescale.com> |
| Date: Fri Oct 10 11:40:59 2008 +0800 |
| |
| Enabled the Freescale SGMII riser card on 8572DS |
| |
| This patch based on Andy's work. |
| Including command 'pixis_set_sgmii' support. |
| |
| Signed-off-by: Liu Yu <yu.liu@freescale.com> |
| |
| commit bff188baf9427c35745356439435acf3864d4c65 |
| Author: Liu Yu <yu.liu@freescale.com> |
| Date: Fri Oct 10 11:40:58 2008 +0800 |
| |
| Make pixis_set_sgmii more general to support MPC85xx boards. |
| |
| The pixis sgmii command depend on the FPGA support on the board, some 85xx |
| boards support SGMII riser card but did not support this command, define |
| CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command. |
| |
| Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits |
| are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and |
| PIXIS_VCFGEN1_MASK in header file for both boards. |
| |
| Signed-off-by: Liu Yu <yu.liu@freescale.com> |
| |
| commit 5e981d683d2363204c76773941c2e9c2044c808f |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Oct 8 23:38:02 2008 -0500 |
| |
| Add cpu/8xxx to TAGS_SUBDIRS |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Oct 9 01:25:55 2008 -0500 |
| |
| fsl_law clear enable before changing. |
| |
| Debug sessions may have left enabled laws. |
| Changing lawbar with an unkown enabled tgtid could cause problems. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 86be510f7b5443e7e937f696bfbe037fdc740b15 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Oct 9 00:29:27 2008 -0500 |
| |
| mpc8572 additional end-point mode |
| |
| mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0. |
| Include host_agent == 0 decode for end-point determination. |
| |
| This is not needed for the ds reference board since pcie3 will be a host |
| in order to connect to the uli chip. Include it here as a reference for |
| other mpc8572 boards. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 6856b3d0221a838580e6bb06f61425fd7529ba93 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Oct 8 23:37:59 2008 -0500 |
| |
| 85xx if NUM_CPUS>1, print cpu number |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Oct 8 23:38:01 2008 -0500 |
| |
| pixis do not print long help if not configured |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Oct 7 08:09:50 2008 -0500 |
| |
| Have u-boot pass stashing parameters into device tree |
| |
| Some cores don't support ethernet stashing at all, and some |
| instances have errata. Adds 3 properties to gianfar nodes |
| which support stashing. For now, just add this support to |
| 85xx SoCs. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 12:37:57 2008 -0400 |
| |
| Add DDR options setting on MPC8641HPCN board |
| |
| * Add board specific parameter table to choose correct cpo, clk_adjust, |
| write_data_delay based on board ddr frequency and n_ranks. |
| |
| * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 12:37:41 2008 -0400 |
| |
| Add ddr interleaving suppport for MPC8572DS board |
| |
| * Add board specific parameter table to choose correct cpo, clk_adjust, |
| write_data_delay, 2T based on board ddr frequency and n_ranks. |
| |
| * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#. |
| |
| * Set memory controller interleaving mode to bank interleaving, and disable |
| bank(chip select) interleaving mode by default, because the default on-board |
| DDR DIMMs are 2x512MB single-rank. |
| |
| * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 1f293b417ac6ab8e317ca2b770377ca93edf2370 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 12:37:26 2008 -0400 |
| |
| Add debug information for DDR controller registers |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit c9ffd839b1ada502c86f88edaf1534426b6688ce |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 12:37:10 2008 -0400 |
| |
| Check DDR interleaving mode |
| |
| * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and |
| ba_intlv_ctl. |
| * Print DDR interleaving mode information |
| * Add doc/README.fsl-ddr to describe the interleaving setting |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit dfb49108e4f86c2224e1f30124328b0de66ef72e |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 12:36:55 2008 -0400 |
| |
| Pass dimm parameters to populate populate controller options |
| |
| Because some dimm parameters like n_ranks needs to be used with the board |
| frequency to choose the board parameters like clk_adjust etc. in the |
| board_specific_paramesters table of the board ddr file, we need to pass |
| the dimm parameters to the board file. |
| |
| * move ddr dimm parameters header file from /cpu to /include directory. |
| * add ddr dimm parameters to populate board specific options. |
| * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit dbbbb3abeff325855cae76e33d69d5665631443f |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 12:36:39 2008 -0400 |
| |
| Make DDR interleaving mode work correctly |
| |
| Fix some bugs: |
| 1. Correctly set intlv_ctl in cs_config. |
| 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled. |
| 3. Set base_address and total memory for each ddr controller in memory |
| controller interleaving mode. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Sep 22 23:40:42 2008 -0500 |
| |
| 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7c0d4a7508d252d2d7c137eeb376814132dda30f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Sep 22 14:11:11 2008 -0500 |
| |
| 85xx: Improve flash remapping on MPC8572DS & MPC8536DS |
| |
| Changing the flash from cacheable to cache-inhibited was taking a significant |
| amount of time due to the fact that we were iterating over the full 256M of |
| flash. Instead we can just flush the L1 d-cache and invalidate the i-cache. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 54e091d3b603a3332c619199ca83a07e95960da4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Sep 22 14:11:10 2008 -0500 |
| |
| 85xx: Export invalidate_{i,d}cache and add flush_dcache |
| |
| Added the ability for C code to invalidate the i/d-cache's and |
| to flush the d-cache. This allows us to more efficient change mappings |
| from cache-able to cache-inhibited. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 16:11:52 2008 +0200 |
| |
| mgcoge, mgsuvd: extract more common code |
| |
| in ft_blob_update () for both boards was an unneccessary |
| repetition of code, which this patch moves in a common |
| function for this boards. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 9e299192ca9850cf725456388042a5aa5a6f3ec7 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 12:15:55 2008 +0200 |
| |
| mgcoge, mgsuvd: use in_*/out_* accesors |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit a21ca95f8b9dca22714952b348e4905ac157b5cd |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 13:52:51 2008 +0200 |
| |
| mgsuvd: fix compiler warning when using soft_i2c driver |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 12:15:05 2008 +0200 |
| |
| mgsuvd: fix coding style |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 5f4c3137f4f051787707c548133823f1656eb508 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 12:13:30 2008 +0200 |
| |
| mgcoge: Second Flash on CS5 not on CS1 |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 76da19df5b8e186d269f29190696bd31fb6c836b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 16 21:52:08 2008 -0500 |
| |
| Added arch_lmb_reserve to allow arch specific memory regions protection |
| |
| Each architecture has different ways of determine what regions of memory |
| might not be valid to get overwritten when we boot. This provides a |
| hook to allow them to reserve any regions they care about. Currently |
| only ppc, m68k and sparc need/use this. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e02d4a9904c8f36395994c0c81469d552b82f5ea |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Oct 16 16:32:35 2008 +0200 |
| |
| mgcoge: added CONFIG_FIT to support the new u-boot image format |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6d0f6bcf337c5261c08fabe12982178c2c489d76 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Oct 16 15:01:15 2008 +0200 |
| |
| rename CFG_ macros to CONFIG_SYS |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Oct 13 14:12:55 2008 -0500 |
| |
| 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Sep 23 10:05:02 2008 -0500 |
| |
| Expose command table search for sub-commands |
| |
| Sub-command can benefit from using the same table and search functions |
| that top level commands have. Expose this functionality by refactoring |
| find_cmd() and introducing find_cmd_tbl() that sub-command processing |
| can call. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f7e51b27508446f8cae3927975817137979ad5e8 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:41:33 2008 +0200 |
| |
| mgsuvd, mgcoge: added BOOTCOUNT feature. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 8f64da7f83b553889bc08400c97047998382e9d2 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:41:00 2008 +0200 |
| |
| mgcoge, mgsuvd: added support for the IVM EEprom. |
| |
| The EEprom contains some Manufacturerinformation, |
| which are read from u-boot at boot time, and saved |
| in same hush shell variables. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:40:28 2008 +0200 |
| |
| hush: add showvar command for hush shell. |
| |
| This new command shows the local variables defined in |
| the hush shell: |
| |
| => help showvar |
| showvar |
| - print values of all hushshell variables |
| showvar name ... |
| - print value of hushshell variable 'name' |
| |
| Also make the set_local_var() and unset_local_var () |
| no longer static, so it is possible to define local |
| hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR |
| is defined, u-boot calls hush_init_var (), where |
| boardspecific code can define local hush shell |
| variables at boottime. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 67b23a322848d828a5e45c0567b72762bfde7abf |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:39:47 2008 +0200 |
| |
| I2C: adding new "i2c bus" Command to the I2C Subsystem. |
| |
| With this Command it is possible to add new I2C Busses, |
| which are behind 1 .. n I2C Muxes. Details see README. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit c24853644ddd2dd2e4246b5854a93e6254a14092 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:39:08 2008 +0200 |
| |
| mgcoge, mgsuvd: add board specific I2C deblocking mechanism. |
| |
| As documented in doc/I2C_Edge_Conditions, adding a |
| board specific deblocking mechanism via CFG_I2C_INIT_BOARD |
| for the mgcoge and mgsuvd board. |
| |
| This code was originally written by Keymile in association |
| with Anatech and Atmel in 1998. The Code toggels the SCL |
| until the SCA line goes to HIGH (max. 16 times). |
| And after this, a start condition is sent. |
| |
| This is another approach to deblock the I2C Bus. The |
| soft I2C driver actually sends 9 clocks with SDA High, |
| and then a stop at the end, to deblock the I2C Bus. |
| |
| Maybe we should use the approach from Keymile as |
| the new standard? |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 4ca107effebfbabac1057c39632105dacef95957 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:38:38 2008 +0200 |
| |
| soft_i2c: Add CFG_I2C_INIT_BOARD option |
| |
| This patch adds the option for a boardspecific |
| I2C deblocking mechanism for the soft i2c driver. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:38:07 2008 +0200 |
| |
| mgcoge, mgsuvd: add DTT (LM75) support. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 8e442df438ab677057571e3ac01846bff7719bce |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:37:34 2008 +0200 |
| |
| lm75: Make the LM75 MULTI_BUS compatible. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 12f1678127c1df2b2878ba93c88948bedc060775 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:37:04 2008 +0200 |
| |
| lm75: fix Codingstyle issues. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit f2202450c75ba6934b356024101500ddcde6e2a6 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:36:33 2008 +0200 |
| |
| mgcoge, mgsuvd: added EEprom support. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 9661bf9d120f760238b2a073b84f2baf05010057 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:36:03 2008 +0200 |
| |
| mgcoge, mgsuvd: add I2C support. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 98aed379586a155292efbf3209356836584b601c |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:35:26 2008 +0200 |
| |
| soft_i2c: prevent compiler warnings if driver does not use CPU Pins. |
| |
| This patch fixes the following warnings, when using |
| the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx |
| systems: |
| |
| soft_i2c.c: In function 'send_reset': |
| soft_i2c.c:93: warning: unused variable 'immr' |
| soft_i2c.c: In function 'send_start': |
| soft_i2c.c:124: warning: unused variable 'immr' |
| soft_i2c.c: In function 'send_stop': |
| soft_i2c.c:146: warning: unused variable 'immr' |
| soft_i2c.c: In function 'send_ack': |
| soft_i2c.c:171: warning: unused variable 'immr' |
| soft_i2c.c: In function 'write_byte': |
| soft_i2c.c:196: warning: unused variable 'immr' |
| soft_i2c.c: In function 'read_byte': |
| soft_i2c.c:244: warning: unused variable 'immr' |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 799b784aa00cb03a352847ab9f9acdde79b72d21 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:34:45 2008 +0200 |
| |
| i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:34:05 2008 +0200 |
| |
| mgcoge: fix Coding Style issues. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit e43a27c49712203fe8848a17714330623edfb2eb |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:33:30 2008 +0200 |
| |
| I2C: add new command i2c reset. |
| |
| If I2C Bus is blocked (see doc/I2C_Edge_Conditions), |
| it is not possible to get out of this, until the |
| complete Hardware gets a reset. This new commando |
| calls again i2c_init (and that calls i2c_init_board |
| if defined), which will deblock the I2C Bus. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:32:25 2008 +0200 |
| |
| mgsuvd, mgcoge: move this 2 boards in one dir. |
| |
| There are some more extensions, which are for both boards |
| and some more boards from this manufacturer will follow soon. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b |
| Author: Dirk Eibach <eibach@gdsys.de> |
| Date: Wed Oct 8 13:44:27 2008 +0200 |
| |
| hwmon: Add LM63 support |
| |
| This patch adds support for the National LM63 temperature |
| sensor with integrated fan control. It's used on the GDSys |
| Neo board (405EP) which will be submitted later. |
| |
| Signed-off-by: Dirk Eibach <eibach@gdsys.de> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 7ba890bf2f2b92831420243c058951aa831119fd |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Wed Oct 8 11:01:17 2008 +0900 |
| |
| Add Red Black Tree support |
| |
| Now it's used at UBI module. Of course other modules can use it. |
| If you want to use it, please define CONFIG_RBTREE |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794 |
| Author: richardretanubun <richardretanubun@ruggedcom.com> |
| Date: Mon Oct 6 16:10:53 2008 -0400 |
| |
| CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c |
| |
| Added support for CONFIG_EFI_PARTITION to ext2 commands. |
| Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> |
| |
| commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567 |
| Author: richardretanubun <richardretanubun@ruggedcom.com> |
| Date: Fri Sep 26 11:13:22 2008 -0400 |
| |
| Add support for CONFIG_EFI_PARTITION (GUID Partition Table) |
| |
| The GUID (Globally Unique Identifier) Partition Table (GPT) is a part |
| of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table |
| |
| Based on linux/fs/partitions/efi.[ch] |
| |
| Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> |
| |
| commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Oct 1 15:26:32 2008 +0200 |
| |
| FIT: output image load address for type 'firmware', fix message while there |
| |
| Now that the auto-update feature uses the 'firmware' type for updates, it is |
| useful to inspect the load address of such images. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Oct 1 15:26:31 2008 +0200 |
| |
| Automatic software update from TFTP server |
| |
| The auto-update feature allows to automatically download software updates |
| from a TFTP server and store them in Flash memory during boot. Updates are |
| contained in a FIT file and protected with SHA-1 checksum. |
| |
| More detailed description can be found in doc/README.update. |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 3f0cf51dabacc2724731c5079a60ea989103bb8f |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Oct 1 15:26:27 2008 +0200 |
| |
| flash: factor out adjusting of Flash address to the end of sector |
| |
| The upcoming automatic update feature needs the ability to adjust an |
| address within Flash to the end of its respective sector. Factor out |
| this functionality to a new function flash_sect_roundb(). |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Oct 1 15:26:29 2008 +0200 |
| |
| net: Make TFTP server timeout configurable |
| |
| There are two aspects of a TFTP transfer involving timeouts: |
| 1. timeout waiting for initial server reply after sending RRQ |
| 2. timeouts while transferring actual data from the server |
| |
| Since the upcoming auto-update feature attempts a TFTP download during each |
| boot, it is undesirable to have a long delay when the TFTP server is not |
| available. Thus, this commit makes the server timeout (1.) configurable by two |
| global variables: |
| |
| TftpRRQTimeoutMSecs |
| TftpRRQTimeoutCountMax |
| |
| TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP |
| server, TftpRRQTimeoutCountMax overrides default number of connection retries. |
| The total delay when trying to download a file from a non-existing TFTP server |
| is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds. |
| |
| Timeouts during file transfers (2.) are unaffected. |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 49f3bdbba8071f56d950a9498b6cdb998b35340a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Oct 1 15:26:28 2008 +0200 |
| |
| net: express the first argument to NetSetTimeout() in milliseconds |
| |
| Enforce millisecond semantics of the first argument to NetSetTimeout() -- |
| the change is transparent for well-behaving boards (CFG_HZ == 1000 and |
| get_timer() countiing in milliseconds). |
| |
| Rationale for this patch is to enable millisecond granularity for |
| network-related timeouts, which is needed for the upcoming automatic |
| software update feature. |
| |
| Summary of changes: |
| - do not scale the first argument to NetSetTimeout() by CFG_HZ |
| - change timeout values used in the networking code to milliseconds |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit c68a05feeb88de9fcf158e67ff6423c4cc988f88 |
| Author: richardretanubun <richardretanubun@ruggedcom.com> |
| Date: Mon Sep 29 18:28:23 2008 -0400 |
| |
| Adds two more ethernet interface to 83xx |
| |
| Added as a convenience for other platforms that uses MPC8360 (has 8 UCC). |
| Six eth interface is chosen because the platform I am using combines |
| UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth. |
| |
| Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 41410eee472b0f42e03a77f961bbc55ef58f3c01 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Sep 24 11:42:12 2008 -0500 |
| |
| Change UEC PHY interface to RGMII on MPC8568MDS |
| |
| Change UEC phy interface from GMII to RGMII on MPC8568MDS board |
| |
| Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed, |
| but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable. |
| |
| Now both UEC1 and UEC2 can work properly under u-boot. |
| |
| It is also in consistent with the kernel setting for 8568 UEC phy interface. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 18 21:30:31 2008 +0200 |
| |
| Prepare v2008.10 release: update CHANGELOG & Makefile |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f7a35a60cf45491871a5c28e9ad24db005487857 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 18:24:06 2008 +0200 |
| |
| mgcoge: add redundant environment sector |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c2537ee85954af9d036b18b644f3e18d837bf4a5 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Oct 17 18:23:27 2008 +0200 |
| |
| mgsuvd: update size of environment |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d |
| Author: Lepcha Suchit <Suchit.Lepcha@freescale.com> |
| Date: Thu Oct 16 13:38:00 2008 -0500 |
| |
| 83xx NAND boot: wait for LTESR[CC] |
| |
| At least some revisions of the 8313, and possibly other chips, do not |
| wait for all pages of the initial 4K NAND region to be loaded before |
| beginning execution; thus, we wait for it before branching out of the |
| first NAND page. |
| |
| This fixes warm reset problems when booting from NAND on 8313erdb. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit bf29e0ea0af03d593c64614136acc723a7a022a2 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Fri Oct 17 12:54:18 2008 +0200 |
| |
| ppc4xx: PPC44x MQ initialization |
| |
| Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC |
| values. This fixes the occasional 440SPe hard locking issues when the 440SPe's |
| dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver). |
| |
| Previously the appropriate initialization had been made in Linux, by the |
| ppc440spe ADMA driver, which is wrong because modifying the MQ configuration |
| registers after normal operation has begun is not supported and could |
| have unpredictable results. |
| |
| Comment from Stefan: This patch doesn't change the resulting value of the |
| MQ registers. It explicitly sets/clears all bits to the desired state which |
| better documents the resulting register value instead of relying on pre-set |
| default values. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ec081c2c190148b374e86a795fb6b1c49caeb549 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 17 12:51:46 2008 +0200 |
| |
| ppc4xx: PPC44x MQ initialization |
| |
| Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC |
| values. This fixes the occasional 440SPe hard locking issues when the 440SPe's |
| dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver). |
| |
| Previously the appropriate initialization had been made in Linux, by the |
| ppc440spe ADMA driver, which is wrong because modifying the MQ configuration |
| registers after normal operation has begun is not supported and could |
| have unpredictable results. |
| |
| Comment from Stefan: This patch doesn't change the resulting value of the |
| MQ registers. It explicitly sets/clears all bits to the desired state which |
| better documents the resulting register value instead of relying on pre-set |
| default values. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 16 21:58:50 2008 -0500 |
| |
| 85xx: Using proper I2C source clock divider for MPC8544 |
| |
| The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being |
| bit 26, instead it should be bit 28. This caused in incorrect |
| interpretation of the i2c_clk which is the same as the SEC clk on |
| MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported |
| in PORDEVSR2. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 42653b826adb319a1df06e24ef26096b2a5d9d2a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 16 21:58:49 2008 -0500 |
| |
| Revert "85xx: Using proper I2C source clock divider for MPC8544" |
| |
| This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159. |
| |
| The fix introduced by this patch is not correct. The problem is |
| that the documentation is not correct for the MPC8544 with regards |
| to which bit in PORDEVSR2 is for the SEC_CFG. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2179c4766bffeece98e5e92040629a96c97e230c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 15 10:19:41 2008 -0500 |
| |
| 85xx: Fix compile warning |
| |
| mpc8536ds.c: In function 'is_sata_supported': |
| mpc8536ds.c:614: warning: unused variable 'devdisr' |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9029b68f3f81b3013044f167ea025e836e6c8c0e |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Oct 15 10:40:24 2008 +0800 |
| |
| Fix the function conflict in x86emu when DEBUG is on |
| |
| The function parse_line() in common/main.c was exposed globally by commit |
| 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same |
| name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG. |
| This patch fix this by renaming the function in the debug.c file. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit b4dbacf69a669a17487054552fc2761149dd6767 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Oct 15 15:50:45 2008 +0200 |
| |
| Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 374b9038293d01d8744a46af9b7854a6fd99b228 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Oct 15 09:51:19 2008 +0200 |
| |
| Fix compiler warning in lib_ppc/board.c |
| |
| Fix compiler warning introduced by commit 0f8cbc18 |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9724555755a6f1066636481b41f7094e0ce93a69 |
| Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> |
| Date: Thu Oct 9 10:29:14 2008 +0530 |
| |
| mpc83xx: wait till UPM completes the write to array |
| |
| Reference manual states that MxMR[MAD] increment is the indication |
| of write to UPM array is complete. Honour that. Also, make the dummy |
| write explicit. |
| |
| also fix the comment. |
| |
| Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51 |
| Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> |
| Date: Wed Oct 8 18:12:20 2008 -0500 |
| |
| Remove unwanted ';' at end of define. |
| |
| Currently this is not creating any problem. But it will result |
| in compilation error when used as below. |
| |
| printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2); |
| |
| Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> |
| |
| continuation of the theme based on git grep "^#define CFG_.*;$" include/ |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b2934a56650e9a6c54432f9ce6dc36757967385e |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Mon Oct 6 10:53:59 2008 -0400 |
| |
| ARM DaVinci: Add maintainer information for SFFSDR board. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sat Oct 4 19:26:16 2008 +0200 |
| |
| api: fix type mismatch |
| |
| This patch fixes a type mismatch and thus removes a compiler |
| warning when compiling with CONFIG_API on powerpc. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Wed Oct 1 12:25:04 2008 -0500 |
| |
| cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS |
| |
| Original code displayed: |
| => help i2c |
| i2c i2c speed [speed] - show or set I2C bus speed |
| i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device |
| ... |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 14 22:13:41 2008 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 10 11:41:01 2008 +0800 |
| |
| Do not init SATA when disabled on 8536DS. |
| |
| SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the |
| driver still try to access the SATA registers, the cpu will hangup. |
| This patch try to fix this by reading the serdes status before the SATA |
| initialize. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 9dbc366744960013965fce8851035b6141f3b3ae |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Fri Oct 10 10:23:22 2008 +0200 |
| |
| The PIPE_INTERRUPT flag is used wrong |
| |
| At a lot of places in the code the PIPE_INTERRUPT flags and friends |
| are used wrong. The wrong bits are compared to this flag resulting |
| in wrong conditions. Also there are macros that should be used for |
| PIPE_* flags. |
| This patch tries to fix them all, however, I was not able to test the |
| changes, because I do not have any of these boards. |
| |
| Review required! |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 48867208444cb2a82e2af9c3249e90b7ed4a1751 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Fri Oct 10 10:23:21 2008 +0200 |
| |
| fix USB initialisation procedure |
| |
| The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes. |
| At some places directly 8,16,32,64 was used instead of the encoded |
| value. Made a enum for the options to make this more clear and to help |
| preventing similar errors in the future. |
| |
| After fixing this bug it became clear that another bug existed where |
| the 'pipe' is and-ed with PIPE_* flags, where it should have been |
| 'usb_pipetype(pipe)', or even better usb_pipeint(pipe). |
| |
| Also removed the triple 'get_device_descriptor' sequence, it has no use, |
| and Windows nor Linux behaves that way. |
| There is also a poll going on with a timeout when usb_control_msg() fails. |
| However, the poll is useless, because the flag will never be set on a error, |
| because there is no code that runs in a parallel that can set this flag. |
| Changed this to something more logical. |
| |
| Tested on AT91SAM9261ek and compared the flow on the USB bus to what |
| Linux is doing. There is no difference anymore in the early initialisation |
| sequence. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit ec4d8c1c1d94a790c1473ae8aace282b817c3123 |
| Author: Nikita V. Youshchenko <yoush@cs.msu.su> |
| Date: Fri Oct 3 00:03:55 2008 +0400 |
| |
| fsl_diu: fix alignment error that caused malloc corruption |
| |
| When aligning malloc()ed screen_base, invalid offset was added. |
| This not only caused misaligned result (which did not cause hardware |
| misbehaviour), but - worse - caused screen_base + smem_len to |
| be out of malloc()ed space, which in turn caused breakage of |
| futher malloc()/free() operation. |
| |
| This patch fixes screen_base alignment. |
| |
| Also this patch makes memset() that cleans framebuffer to be executed |
| on first initialization of diu, not only on re-initialization. It looks |
| correct to clean the framebuffer instead of displaying random garbage; |
| I believe that was disabled only because that memset caused breakage |
| of malloc/free described above - which no longer happens with the fix |
| described above. |
| |
| Signed-off-by: Nikita V. Youshchenko <yoush@debian.org> |
| |
| commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Sep 24 10:29:37 2008 +0200 |
| |
| api: Fix building with CONFIG_API |
| |
| This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE. |
| |
| USB_MAX_STOR_DEV is defined in include/usb.h, but |
| needed in api/api_storage.c. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit abbb90666d5ef2f500ebbedbb80ff60adc56b043 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Sep 23 12:39:40 2008 -0500 |
| |
| Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 81e612014c40c922ec35488d17c504d4e9286f06 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Sep 23 12:38:42 2008 -0500 |
| |
| Remove CFG_EEPROM_PAGE* dependencies for temperature sensors |
| |
| The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and |
| CFG_EEPROM_PAGE_WRITE_BITS in various temperature |
| sensor drivers are not necessary |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Oct 14 07:04:38 2008 -0400 |
| |
| cmd_spi: remove broken signed casting for display |
| |
| Since we're working with unsigned data, you can't apply a signed pointer |
| cast and then attempt to print the result. Otherwise you get wrong output |
| when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF". |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d5fd0b49210c941de8a1fce3947ace92243ab5ca |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Oct 14 07:05:24 2008 -0400 |
| |
| strings cmd: drop old CONFIG_CFG_STRINGS define |
| |
| We don't need CONFIG_CFG_STRINGS anymore now that we have the define |
| CONFIG_CMD_STRINGS and Makefile control. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit fecb5ade3b37f62981f2b05b621005850173aaa9 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Sep 19 17:32:49 2008 +0800 |
| |
| Fix the NAND size overflow issue. |
| |
| When the total size of all NAND devices exceeds 4 GiB, the size will |
| overflow. This patch tries to fix this. |
| |
| Note that we still have a problem when a single NAND device is bigger |
| than 4 GiB: then the overflow would actually happen earlier, i. e. |
| when storing the size in nand_info[].size, as nand_info[].size is an |
| "u_int32_t". |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 30f574717277238b9014b8136c90eea77196490f |
| Author: Louis Su <louis@asix.com.tw> |
| Date: Wed Jul 9 11:01:37 2008 +0800 |
| |
| AX88180: new gigabit network driver |
| |
| Signed-off-by: Louis Su <louis@asix.com.tw> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit c9d6b6925344740ca1db2f8a6bab7921ff820de3 |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Tue Aug 19 16:07:03 2008 +0200 |
| |
| enable 10/100M at VSC8601 at tsec driver |
| |
| Currently VSC8601 doesn't link with 10/100M partners if the |
| EEPROM/Strapping is not set up. |
| Setting the auto-neg register fixes this. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 702c85b0e876d587c11acdbb55738ee52acd54f4 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Sep 30 15:02:53 2008 +0900 |
| |
| net: ne2000: Divided a function of NE2000 driver |
| |
| get_prom function was used __attriute__ , but it is not enable. |
| ax88796.o does not do link besides ne2000.o. When ld is carried |
| out, get_prom function of ax88796.c is ignored. |
| This problem is a thing by specifications of ld. |
| I checked and test this patch on SuperH and MIPS. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Oct 14 11:10:59 2008 +0900 |
| |
| sh: rsk7203: Add smc911x driver support to board config file |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit cae6f909baf86357b3c0bd01acfc414348c4d175 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Oct 9 13:54:33 2008 +0900 |
| |
| sh: Fix cannot execute a stand-alone application |
| |
| Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Oct 8 23:38:00 2008 -0500 |
| |
| fsl_pci_init do not scan bus when configured as an end-point |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Tue Sep 16 17:07:53 2008 -0400 |
| |
| ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board. |
| |
| This is no longer necessary now that the GD_FLG_RELOC flag is set for |
| all ARM boards. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit d977a57356657ba241256231efca32828a5822f9 |
| Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> |
| Date: Sat Sep 13 10:04:32 2008 +0200 |
| |
| Fix lzma uncompress call (image_start wrongly used instead image_len) |
| |
| Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> |
| |
| commit 392438406041415fe64ab8748ec5ab5ad01d1cf7 |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Thu Aug 28 14:09:15 2008 -0700 |
| |
| mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache |
| |
| This is needed in unlock_ram_in_cache() because it is called from C and |
| will corrupt the small data area anchor that is kept in R2. |
| |
| lock_ram_in_cache() is modified similarly as good coding practice, but |
| is not called from C. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| |
| commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 19 15:05:34 2008 -0500 |
| |
| 86xx: remove redudant code with lib_ppc/interrupts.c |
| |
| For some reason we duplicated the majority of code in lib_ppc/interrupts.c |
| Not know how that happened, but there is no good reason for it. |
| |
| Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why |
| they exist. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0d01f66d235118515b5086b88f82498bc0695d6a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Oct 9 01:26:36 2008 -0500 |
| |
| CFI: cfi_flash write fix for AMD legacy |
| |
| The flash_unlock_seq requires a sector for AMD_LEGACY. |
| Fix a retcode check typeo. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 542b385a620a1783454a00424930e51895f45073 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 7 13:13:10 2008 +0200 |
| |
| ppc4xx: Fix USB 2.0 phy reset sequence |
| |
| This patch fixes USB 2.0 communication issues on some DU440 boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df8c1ce11114c2260dedb5547281945f7db8fa5c |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 7 13:13:09 2008 +0200 |
| |
| ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 7 13:13:08 2008 +0200 |
| |
| ppc4xx: Fix DU440 GPIO configuration |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 35dd025c70fcc4389317db2f2a9d14795172137d |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Oct 7 13:13:07 2008 +0200 |
| |
| ppc4xx: Update DU440 config |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f3bf9273939ffe1a60a32a2eef909097f15df56b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 8 15:36:39 2008 -0500 |
| |
| MPC8572DS: Fix compile warnings |
| |
| Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following |
| compile warnings: |
| |
| cmd_i2c.c:112: warning: missing braces around initializer |
| cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]') |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit dffd2446fb041f38ef034b0fcf41e51e5e489159 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Tue Sep 30 10:55:57 2008 +0200 |
| |
| 85xx: Using proper I2C source clock divider for MPC8544 |
| |
| Measurements with our MPC8544 board showed that the I2C bus frequency |
| is wrong by a factor of 1.5. Obviously, the interpretation of the |
| MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not |
| correct. There seems to be an error in the 8544 RM. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17 |
| Author: Rafal Czubak <rcz@semihalf.com> |
| Date: Wed Oct 8 13:41:30 2008 +0200 |
| |
| FSL: Fix get_cpu_board_revision() return value. |
| |
| get_cpu_board_revision() returned board revision based on information stored |
| in global static struct eeprom. It should instead use one from local struct |
| board_eeprom, to which the data is actually read from EEPROM. The bug led to |
| system hang after printing L1 cache information on U-Boot startup. The problem |
| was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx |
| boards using CFG_I2C_EEPROM_CCID. |
| |
| The change has been successfully tested on MPC8555CDS system. |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| |
| commit 747f316cca484ed627a97dd3391febabce384186 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Sep 30 20:08:49 2008 +0200 |
| |
| update uImage FIT multi documentation |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Sep 30 20:08:36 2008 +0200 |
| |
| move README.imx31 to doc/ and merge with README.mx31 |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Sep 25 20:54:37 2008 +0200 |
| |
| i.MX31: switch to CFG_HZ=1000 |
| |
| Switch to the standard CFG_HZ=1000 value, while at it, minor white-space |
| cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads, |
| provides 2% or 0.4% precision depending on the |
| CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s |
| boot-delay. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2 |
| Author: gnusercn <gnusercn@gmail.com> |
| Date: Wed Oct 8 18:58:58 2008 +0200 |
| |
| Fix bug: in arch-arm, env_get_char dose not work fine |
| |
| due to the arm implementation which supposed that U-Boot is in RAM |
| when we jump to start_armboot |
| |
| Signed-off-by: gnusercn <gnusercn@gmail.com> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f |
| Author: Adam Graham <agraham@amcc.com> |
| Date: Mon Oct 6 10:16:13 2008 -0700 |
| |
| ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change |
| |
| After changing SDRAM_CLKTR phase value rerun the memory preload |
| initialization sequence (INITPLR) to reset and relock the memory |
| DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing |
| adjustment effects the phase relationship of the internal, to the |
| PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT. |
| |
| Signed-off-by: Adam Graham <agraham@amcc.com> |
| Signed-off-by: Victor Gallardo <vgallardo@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 11:48:03 2008 -0400 |
| |
| Remove redundant #define for MPC8536DS |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 445a7b38308eb05b41de74165b20855db58c7ee5 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 11:47:30 2008 -0400 |
| |
| Add ID EEPROM support for MPC8572DS |
| |
| The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for |
| system information like mac addresses etc. This patch enables it. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri Oct 3 11:46:59 2008 -0400 |
| |
| Minor fixes for I2C address on MPC8572DS |
| |
| MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1 |
| according to the board spec, and adds the 2nd i2c bus offset. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Sat Sep 27 14:40:57 2008 +0800 |
| |
| Fix the incorrect DDR clk freq reporting on 8536DS |
| |
| On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111), |
| The display is still sync mode DDR freq. This patch try to fix |
| this. The display DDR freq is now the actual freq in both |
| sync and async mode. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 7 10:28:46 2008 -0500 |
| |
| 85xx: Remove setting of *cache-line-size in device trees |
| |
| ePAPR says if the *cache-block-size is the same as *cache-line-size |
| than we don't need the *cache-line-size property. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit cd3cb0d9269d155276b00207e3816a9347fd1c92 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Oct 4 07:56:06 2008 -0400 |
| |
| libfdt: Fix error in documentation for fdt_get_alias_namelen() |
| |
| Oops, screwed up the function name in the documenting comment for this |
| function. Trivial correction in this patch. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Wed Aug 20 16:55:14 2008 +1000 |
| |
| libfdt: Add function to explicitly expand aliases |
| |
| Kumar has already added alias expansion to fdt_path_offset(). |
| However, in some circumstances it may be convenient for the user of |
| libfdt to explicitly get the string expansion of an alias. This patch |
| adds a function to do this, fdt_get_alias(), and uses it to implement |
| fdt_path_offset(). |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Oct 2 01:55:38 2008 -0400 |
| |
| cfi_flash: do not reset flash when probe fails |
| |
| The CFI flash driver starts at flash_init() which calls down into |
| flash_get_size(). This starts by calling flash_detect_cfi(). If said |
| function fails, flash_get_size() finishes by attempting to reset the |
| flash. Unfortunately, it does this with an info->portwidth set to 0x10 |
| which filters down into flash_make_cmd() and that happily smashes the |
| stack by sticking info->portwidth bytes into a cfiword_t variable that |
| lives on the stack. On a 64bit system you probably won't notice, but |
| killing the last 8 bytes on a 32bit system usually leads to a corrupt |
| return address. Which is what happens on a Blackfin system. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Sep 26 17:03:26 2008 +0200 |
| |
| fdt: Overwrite /chosen node in bootm if it already exists in the dtb |
| |
| Set force parameter in fdt_chosen() call in do_bootm_linux() call. |
| Without this, the chosen node is not overwritten if it already |
| exists. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Sep 25 11:02:17 2008 -0500 |
| |
| Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3. |
| |
| Using Gcc 4.3 detected this problem: |
| |
| ../dtc/libfdt/fdt.c: In function 'fdt_next_tag': |
| ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not |
| occur when assuming that (X + c) < X is always false |
| |
| To fix the problem, treat the offset as an unsigned int. |
| |
| The problem report and proposed fix were provided |
| by Steve Papacharalambous <stevep@freescale.com>. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Fri Aug 29 14:19:13 2008 +1000 |
| |
| libfdt: Fix bugs in fdt_get_path() |
| |
| The current implementation of fdt_get_path() has a couple of bugs, |
| fixed by this patch. |
| |
| First, contrary to its documentation, on success it returns the length |
| of the node's path, rather than 0. The testcase is correspondingly |
| wrong, and the patch fixes this as well. |
| |
| Second, in some circumstances, it will return -FDT_ERR_BADOFFSET |
| instead of -FDT_ERR_NOSPACE when given insufficient buffer space. |
| Specifically this happens when there is insufficient space even to |
| hold the path's second last component. This behaviour is corrected, |
| and the testcase updated to check it. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 33af3e6656e84660d397b5dd95abab2dccc36f83 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Oct 1 12:34:58 2008 +0200 |
| |
| TQM5200: enable support for ATAPI devices |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Sep 15 05:48:25 2008 +0200 |
| |
| Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM" |
| |
| we need this due to the arm implementation which supposed that U-Boot |
| is in RAM when we jump to start_armboot |
| |
| This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d. |
| in order to do it for all arm board |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Sep 24 08:46:25 2008 -0500 |
| |
| mpc83xx: don't disable autoboot |
| |
| bootdelay set to -1 'permanently' disables autobooting, even if |
| bootcmd is specified. Change to a positive value to allow |
| autobooting when a bootcmd is set. |
| |
| Reported-by: Coray Tate <Coray.Tate@freescale.com> |
| Cc: Scott Wood <scottwood@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2fb29c520c42b7bfef33ea3fd1527eba64099164 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Wed Sep 24 10:42:15 2008 +0900 |
| |
| mpc83xx: Fix typo in include/mpc83xx.h |
| |
| Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 162c41c03179727a1d14262f703c9a8bc40231fa |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Sep 23 09:38:49 2008 -0500 |
| |
| mpc83xx: add h/w flash protection to board configs |
| |
| the operating system may leave flash in a h/w locked state after writing. |
| This allows u-boot to continue to write flash by enabling h/w unlocking |
| by default. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu Sep 11 21:35:36 2008 +0400 |
| |
| mpc83xx: spd_sdram: fix ddr sdram base address assignment bug |
| |
| The spd_dram code shifts the base address, then masks 20 bits, but |
| forgets to shift the base address back. Fix this by just masking the |
| base address correctly. |
| |
| Found this bug while trying to relocate a DDR memory at the base != 0. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8fd4166c467a46773f80208bda1ec3b4757747bc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Sep 22 16:10:43 2008 +0200 |
| |
| ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup |
| |
| Depending on the configuration jumper "SATA SELECT", U-Boot disabled |
| either one PCIe node or the SATA node in the device tree blob. This |
| patch removes the unnecessary and even confusing warning, when the node |
| is not found at all. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Fri Sep 19 13:30:06 2008 +0200 |
| |
| Add missing device types to dev_print() in part.c |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| |
| commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 22 22:23:06 2008 +0200 |
| |
| Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which |
| eventually leads to a machine check. This change assures that DPRAM |
| is allocated only once in that case. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23 |
| Author: Laurent Pinchart <laurentp@cse-semaphore.com> |
| Date: Wed Sep 17 17:57:34 2008 +0200 |
| |
| Fix Spartan-3 definitions. |
| |
| A few Spartan-3 definitions erroneously use Spartan-3E size |
| constants. This patch fixes them. |
| |
| Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> |
| |
| commit 28113e1f0da4146b823ffce37680d31d5685a60b |
| Author: Laurent Pinchart <laurentp@cse-semaphore.com> |
| Date: Wed Sep 17 17:41:58 2008 +0200 |
| |
| Remove duplicate Spartan-3E definition. |
| |
| Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5c65ecf7cd94df250b295621f3b24135cbcfe579 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Sep 17 13:46:17 2008 +0200 |
| |
| socrates: change default mtest address range |
| |
| Running mtest command on socrates without specifying |
| an address range crashes the board. This patch changes |
| default mtest address range to prevent this behavior. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit d666b2d59674b5e002c0821b7ab83ec3ff90d670 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Sep 17 12:34:45 2008 +0200 |
| |
| socrates: fix crash after relocation |
| |
| Currently U-Boot crashes after relocation to RAM. |
| Changing the CPO value of the DDR SDRAM TIMING_CFG_2 |
| register to READ_LAT + 1 (to the value it was before |
| conversion of socrates to new DDR code) fixes the |
| problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 562788b0a303f3528b920d81f547f5ca77ba528e |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Sep 17 11:45:51 2008 +0200 |
| |
| socrates: fix SPD EEPROM address |
| |
| Commit be0bd8234b9777ecd63c4c686f72af070d886517 |
| changed SPD EEPROM address to 0x51 and DDR SDRAM |
| detection stopped working. Change this address |
| back to 0x50. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 023824549a370bd185d7129d9a6c86f9be7b86a8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Sep 22 11:06:50 2008 +0200 |
| |
| Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)" |
| |
| This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e58c41e26cf3c8accd60311be579f452e368e97e |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Sep 18 20:13:08 2008 +0900 |
| |
| usb: Fix compile warning of r8a66597-hcd |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit b5d10a13525c07ec6374adf840d7c87553b5f189 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Sep 18 19:34:36 2008 +0900 |
| |
| sh: Fix compile warning |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 4a065abf926f128beb36d93449defa0d690e7fef |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Sep 18 19:04:26 2008 +0900 |
| |
| sh: Add support watchdog for SH4A core |
| |
| Add support watchdog for SH4A core (SH7763, SH7780 and SH7785). |
| And fix some compile warning. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Sep 17 11:45:26 2008 +0900 |
| |
| sh: Fix typo in SH serial driver |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6b44a439215ba7c63f666f8099213ea4f05f2b07 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Sep 17 11:08:36 2008 +0900 |
| |
| sh: Add support any page size and empty_zero_page to SH Linux uImage |
| |
| Old U-Boot supported 4KB page size only. If this version, Linux |
| kernel can not get command line from U-Boot. |
| SH Linux kernel can change page size and empty_zero_page. |
| This patch support this function and fix promlem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit ce9f99ddb59628f41dc534e892368a7d66dfc774 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Aug 28 13:40:52 2008 +0900 |
| |
| sh: rsk7203: Add support pkt_data_pull and pkt_data_push function |
| |
| Add function of smc911x, pkt_data_pull and pkt_data_push. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit dd820b03a2f45e86e7960e26729a3b58e3dda44a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Sep 18 13:57:32 2008 +0200 |
| |
| ADS5121: fix typo in "rootpath" default setting |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c9e8436b10cca53fca4904ecbadcd6231ad72c38 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Sep 16 14:55:44 2008 +0200 |
| |
| USB layer of U-Boot causes USB protocol errors while using USB memory sticks |
| |
| There are several differences between Linux, Windows and U-boot for initialising the |
| USB devices. While analysing the behaviour of U-boot it turned out that U-boot does |
| things really different, and some are wrong (compared to the USB standard). |
| |
| This patch fixes some errors: |
| * The NEW_init procedure that was already in the code is good, while the old procedure |
| is wrong. See code comments for more info. |
| * On a Control request the data returned by the device can be more than 8 bytes, while |
| the host limits it to 8 bytes. This caused the host to generate a DataOverrun error. |
| This results in a lot of USB sticks not being recognised, and the transmission ended |
| frequently with a CTL:TIMEOUT Error. |
| * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 6f5794a6f78b313231256958fd73673c6aacc116 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Sep 16 14:55:43 2008 +0200 |
| |
| Refactoring parts of the common USB OHCI code |
| |
| This patch refactors some large routines of the USB OHCI code by |
| making some routines smaller and more readable which helps |
| debugging and understanding the code. (Makes the code looks |
| somewhat more like the Linux implementation.) |
| |
| Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant) |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit be19d324edc1a1d7f393d24e10d164cd94c91a00 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Sep 16 14:55:42 2008 +0200 |
| |
| Fix for USB sticks not working on ARM while using GCC 4.x compilers |
| |
| The GCC-compiler makes an optimisation error while optimising the routine |
| usb_set_maxpacket(). This should be fixed in the compiler in the first place, |
| but there lots of compilers out there that makes this error, that it is |
| probably wiser to workaround it in U-boot itself. |
| |
| What happens is that the register r3 is used as loop-counter 'i', but gets |
| overwritten later on. From there it starts using register r3 for several other |
| things and the assembler code is becoming a big mess. This is clearly a compiler bug. |
| |
| This error occurs on at least several versions of Code Sourcery Lite compilers |
| for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other |
| compilers, while compiling for armv4t, or armv5te with Os, O1 and O2. |
| |
| We work around it by splitting up this routine in 2 parts, and making sure that |
| the split out part is NOT inlined any longer. This will make GCC spit out assembler |
| that do not show this problem. Another possibility is to adapt the Makefile to stop |
| optimisation for the complete file. I think this solution is nicer. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Sep 17 10:17:55 2008 +0200 |
| |
| Coding style cleanup; update CHANEGLOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8 |
| Author: Victor Gallardo <vgallardo@amcc.com> |
| Date: Tue Sep 16 06:59:13 2008 -0700 |
| |
| ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB) |
| |
| Signed-off-by: Victor Gallardo <vgallardo@amcc.com> |
| Signed-off-by: Adam Graham <agraham@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ce47eb402c5e29a025399dc282246414fc492940 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Sep 16 10:04:47 2008 -0500 |
| |
| Support for multiple SGMII/TBI interfaces for TSEC ethernet |
| |
| Fix TBI PHY accesses to use the proper offset in CPU register space. The |
| previous code would incorrectly access the TBI PHY by reading/writing to CPU |
| register space at the same location as would be used to access external PHYs. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7c803be2eb3cae245dedda438776e08fb122250f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 16 18:02:19 2008 +0200 |
| |
| TQM8xx: Fix CFI flash driver support for all TQM8xx based boards |
| |
| After switching to using the CFI flash driver, the correct remapping |
| of the flash banks was forgotten. |
| |
| Also, some boards were not adapted, and the old legacy flash driver |
| was not removed yet. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c0d2f87d6c450128b88e73eea715fa3654f65b6c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 14 00:59:35 2008 +0200 |
| |
| Prepare v2008.10-rc2 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Sep 13 02:23:05 2008 +0200 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0c32565f536609d78feef35c88bbc39d3ac53a73 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Wed Sep 10 09:18:34 2008 -0500 |
| |
| Update mailing list email and archive addresses |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit fb661ea444ae61de60520f66ae84cdb5dd5a3246 |
| Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de> |
| Date: Thu Sep 11 15:40:01 2008 +0200 |
| |
| 85xx: socrates: autoprobe Lime chip |
| |
| This patch is an attempt to implement autoprobing for the Lime |
| presence on the bus. |
| Configure GPCM for Lime CS2 and try to access chip ID registers. |
| Second read atempt delivers register values if the chip is present. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5 |
| Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de> |
| Date: Thu Sep 11 15:40:01 2008 +0200 |
| |
| 85xx: socrates: Add support for new image format. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Sep 11 17:28:18 2008 +0900 |
| |
| sh: Fix compile error for r2dplus |
| |
| netdev.h was not include by r2dplus. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| |
| commit 56844a22b76c719e600047e23b80465a44d76abd |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Sep 11 08:11:23 2008 +0200 |
| |
| powerpc: Fix bootm to boot up again with a Ramdisk |
| |
| Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen, |
| and this stopped Linux from booting with a Ramdisk. This patch fixes |
| this, by deleting the useless dummy mem reservation. |
| |
| When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now |
| added to of_size, so we dont need anymore a dummy mem reservation. |
| |
| I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based |
| system (=0x44 bytes) and rounded it up to 0x80). |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7 |
| Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> |
| Date: Mon Sep 8 02:46:13 2008 +0200 |
| |
| Add support for LZMA uncompression algorithm. |
| |
| Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0008b6d968160abe2bfd936493f3a516a7c8da20 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Fri Jun 27 23:04:20 2008 +0400 |
| |
| fsl_elbc_nand: ecclayout cleanups |
| |
| This patch deletes oobavail assignments, they're calculated by the nand |
| core code in nand_scan_tail, plus current oobavail values are wrong for |
| the LP NANDs. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 8f42bf1c393d53a70c2545e9f329d11c46d74794 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Fri Jun 27 23:04:13 2008 +0400 |
| |
| fsl_elbc_nand: implement support for flash-based BBT |
| |
| This patch implements support for flash-based BBT for chips working |
| through ELBC NAND controller, so that NAND core will not have to re-scan |
| for bad blocks on every boot. |
| |
| Because ELBC controller may provide HW-generated ECCs we should adjust |
| bbt pattern and bbt version positions in the OOB free area. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 97ae023648e764f794ffb9c52da109d6caf09c47 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Fri Jun 27 23:04:04 2008 +0400 |
| |
| fsl_elbc_nand: fix OOB workability for large page NAND chips |
| |
| For large page chips, nand_bbt is looking into OOB area, and checking |
| for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be |
| reserved for bbt means. |
| |
| But ELBC driver is specifying ecclayout so that oobfree area starts at |
| offset 1, so only one byte left for the bbt purposes. |
| |
| This causes problems with any OOB users, namely JFFS2: after first mount |
| JFFS2 will fill all OOBs with "erased marker", so OOBs will contain: |
| |
| OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff |
| OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| |
| And on the next boot, NAND core will rescan for bad blocks, then will |
| see "0xff 0x19" pattern, and will mark all blocks as bad ones. |
| |
| To fix the issue we should implement our own bad block pattern: just one |
| byte at OOB start. Though, this will work only for x8 chips. For x16 |
| chips two bytes must be checked. Since ELBC driver does not support x16 |
| NANDs (yet), we're safe for now. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 7238ada313057a85409485b8ee21515dc10c07a5 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Sep 12 13:52:21 2008 +0200 |
| |
| MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b18410e508a12ba0a177dfc2a386857c806fa96d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Sep 11 13:05:56 2008 +0200 |
| |
| ppc4xx: Enable device tree (FDT) support in zeus board port |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Sep 10 16:53:47 2008 +0200 |
| |
| ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports |
| |
| This patch fixes a problem introdiced with patch |
| bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by |
| initdram()]. |
| |
| The boards affected are: |
| - PCI405 |
| - PPChameleonEVB |
| - quad100hd |
| - taihu |
| - zeus |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 61737c59a3285f6fadf96a5836879898c04ec28d |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Thu Sep 11 19:41:26 2008 -0400 |
| |
| ppc4xx: Add .gitignore file to xilinx-ppc440 boards |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Thu Sep 11 19:41:25 2008 -0400 |
| |
| ppc4xx: Fix compilation of v5fx30teval_flash |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Wed Sep 10 17:44:30 2008 -0400 |
| |
| ppc4xx: Fix in-tree build for ppc440-generic boards |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Sep 12 02:20:47 2008 +0200 |
| |
| ARM: synchronize mach-types.h with linux 2.6.27-rc6 |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c |
| Author: Jens Scharsig <esw@bus-elektronik.de> |
| Date: Fri Sep 12 02:20:47 2008 +0200 |
| |
| at91rm9200: fix errors with CONFIG_CMD_I2C_TREE |
| |
| This patch prevents linker error on AT91RM9200 boards, if |
| CONFIG_CMD_I2_TREE is set. |
| It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function. |
| |
| Signed-off-by: Jens Scharsig <esw@bus-elektronik.de> |
| |
| commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Fri Sep 12 02:20:47 2008 +0200 |
| |
| ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c |
| |
| ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit 03db53335c8eba656a7c44d1555b1a4514383e33 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Fri Sep 12 02:20:46 2008 +0200 |
| |
| make: Remove redundant __ARM__ addition when cross-compiling on *BSD |
| |
| __ARM__ is given by arm_config.mk automatically. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4 |
| Author: Claudio Scordino <claudio@evidence.eu.com> |
| Date: Fri Sep 12 02:20:46 2008 +0200 |
| |
| Fix MACH_TYPE for the AT91RM9200DK board. |
| |
| Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> |
| |
| commit 274737e5eb25b2bcd3af3a96da923effd543284f |
| Author: Andrew Dyer <adyer@righthandtech.com> |
| Date: Fri Sep 12 02:20:46 2008 +0200 |
| |
| i.mx change get_timer(base) to return time since base |
| |
| This patch changes get_timer() for i.MX to return the time since |
| 'base' instead of the time since the counter was at zero. |
| |
| Symptom seen is flash timeout errors when erasing or programming a |
| sector using the common cfi flash code. |
| |
| Signed-off-by: Andrew Dyer <adyer@righthandtech.com> |
| |
| commit 48fed40575b3e8eae960eb0141509ddd9a73012a |
| Author: Andrew Dyer <adyer@righthandtech.com> |
| Date: Fri Sep 12 02:20:46 2008 +0200 |
| |
| i.MX use u-boot baud rate and don't assume UART master clock |
| |
| 1) Change the i.MX serial driver to use the baud rate set in the |
| u-boot environment |
| |
| 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations |
| |
| 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write |
| one to clear" like other status bits in the reg.) |
| |
| Signed-off-by: Andrew Dyer <adyer@righthandtech.com> |
| |
| commit 6e1551a870d360805b9d172dc56d935064abe71d |
| Author: Andrew Dyer <adyer@righthandtech.com> |
| Date: Fri Sep 12 02:20:46 2008 +0200 |
| |
| arm920t fix constant error in start.S |
| |
| Code in cpu/arm920t/start.S will die with a compilation error if |
| CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for |
| the ARM sub instruction. Change the code so that each is subtracted |
| independently to avoid the error. |
| |
| Signed-off-by: Andrew Dyer <adyer@righthandtech.com> |
| |
| commit b23253835f871cd9bd8e955b9a971d18a7d4ff56 |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Fri Sep 12 02:20:40 2008 +0200 |
| |
| ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h |
| |
| - Correct Invalid #define of MPUTIM_PTV_MASK for |
| omap1510 & omap730 register definition |
| |
| MPUTIM_PTV_MASK is defined as |
| #define MPUTIM_PTV_MASK (0x7<<PTV_BIT) |
| |
| while it should have been |
| #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT) |
| |
| - Below Patch corrects the same |
| |
| Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf |
| Author: Adrian Filipi <adrian.filipi@eurotech.com> |
| Date: Fri Jul 18 11:52:02 2008 -0400 |
| |
| Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v. |
| |
| Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com> |
| |
| commit eb16135df20535b0d19969f50fb5bd17f95e9c25 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Aug 28 12:25:11 2008 +0200 |
| |
| i.MX31: document timer precision option |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 1a6337b01351b82a45b0defa76f08744511c580b |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Fri Aug 29 10:36:18 2008 +0200 |
| |
| i.MX31: Make the SPI bus and chip select configurable for MC13783 |
| |
| The i.MX31 has three SPI buses and each bus has several chip selects |
| and the MC13783 chip can be connected to any of these. The current |
| RTC driver for MC13783 is hardcoded for CSPI2/SS2. |
| |
| This patch makes make MC13783 SPI bus and chip select configurable |
| via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit 8c4ebec25b21e355b8488698ec1594da9701fff4 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Fri Aug 29 10:36:17 2008 +0200 |
| |
| i.MX31: Add reset_timer() and modify get_timer_masked(). |
| |
| This patch adds the reset_timer() function (needed by nand_base.c) and |
| modifies the get_timer_masked() to work in the same way as the omap24xx |
| function. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit deeec4991a55de243787002ede24d2331d234fc8 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:09 2008 +0200 |
| |
| ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a3a08c0cedd329edf5256e1d6b2bad0fca002725 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:09 2008 +0200 |
| |
| bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0e8d158664a913392cb01fb11a948d83f72e105e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:06 2008 +0200 |
| |
| rename CFG_ENV macros to CONFIG_ENV |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:05 2008 +0200 |
| |
| nvedit: rename error comment to CONFIG_ENV_IS_IN_ |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit b64b775e7546ed138df360ceb3a71ee358cb9a01 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:05 2008 +0200 |
| |
| cmd_mem: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8a40fb148efa442d6526eac46a2001e4c64d28ff |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:05 2008 +0200 |
| |
| move cmd_get_data_size to command.c |
| |
| add CMD_DATA_SIZE macro to enable it |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 507641d2491980531932b9f25dab37fe5e6c3a1a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:04 2008 +0200 |
| |
| env_flash: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 5a1aceb0689e2f731491838970884a673ef7e7d3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:04 2008 +0200 |
| |
| rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7d9b5bae5ba558c7464d89d033aca04acaf01172 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:03 2008 +0200 |
| |
| cleanup use of CFG_ENV_IS_IN_FLASH |
| |
| - #if CFG_ENV_IS_IN_FLASH |
| - #if (CFG_ENV_IS_IN_FLASH == 1) |
| - #define CFG_ENV_IS_IN_FLASH 0 |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:01 2008 +0200 |
| |
| rename environment.c in env_embedded.c to reflect is functionality |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c0878af6e32f0fd8e13a6ca315b9add64441115a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:01 2008 +0200 |
| |
| env_nowhere: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 93f6d72544da4510a146bc4c93d609b0116cde37 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:00 2008 +0200 |
| |
| rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2556ef78113b5f089dfcac5da90bf31dd568397b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:00 2008 +0200 |
| |
| env_sf: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:00 2008 +0200 |
| |
| rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 55c5f49910ec8225347aa1d211352a84de6649b4 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:48:00 2008 +0200 |
| |
| env_onenand: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9656138ff1a34d4c4768db6b490deffc40ee674b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:47:59 2008 +0200 |
| |
| rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 957a0e69575683efd70ace147746bbb3d8e7c501 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:47:59 2008 +0200 |
| |
| env_nvram: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9314cee6917444ab88bd4e758da7a30975120187 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:47:59 2008 +0200 |
| |
| rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 06f61354397911a4c121dfa51b6ccbf7e300d48b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:47:59 2008 +0200 |
| |
| env_nand: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 51bfee192099206a4397f15f3b93516e01f58ab0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:47:58 2008 +0200 |
| |
| rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:47:58 2008 +0200 |
| |
| env_dataflash: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 057c849c45b9ee19df8ff3acdeee66be52819962 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:47:58 2008 +0200 |
| |
| rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d1034bc8db60fa6bd419328baf6a75cb0645cee8 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Sep 10 22:47:52 2008 +0200 |
| |
| cmd_eeprom: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Sep 5 09:19:54 2008 +0200 |
| |
| env_eeprom: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Sep 5 09:19:30 2008 +0200 |
| |
| rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 32628c5008105a732212003d83b75f05e5243bb2 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 30 23:54:58 2008 +0200 |
| |
| cmd_mac: Move conditional compilation to Makefile |
| |
| finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM |
| start in commit ad8f8687b78c3e917b173f038926695383c55555 |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e5648acab153f0f429bfc714902c5aaa7879f71b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 30 23:47:41 2008 +0200 |
| |
| cmd_fdc: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2d02d91d530e831f2dab228085963fc1d5b71cb0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 30 23:47:38 2008 +0200 |
| |
| common/Makefile: add core command section |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 30 23:29:57 2008 +0200 |
| |
| cmd_vfd: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6644641d072aee3087da129d8443187196a4d8a9 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Sep 10 11:48:49 2008 -0500 |
| |
| delta, zylonite: Update nand_oobinfo to nand_ecclayout. |
| |
| This is part of the switch to newer upstream MTD code. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Sat Aug 30 17:06:55 2008 -0400 |
| |
| ARM DaVinci: Fix broken HW ECC for large page NAND. |
| |
| Based on original patch by Bernard Blackham <bernard@largestprime.net> |
| |
| U-boot's HW ECC support for large page NAND on Davinci is completely |
| broken. Some kernels, such as the 2.6.10 one supported by |
| MontaVista for DaVinci, rely upon this broken behaviour as they |
| share the same code for ECCs. In the existing scheme, error |
| detection *might* work on large page, but error correction |
| definitely does not. Small page ECC correction works, but the |
| format is not compatible with the mainline git kernel. |
| |
| This patch adds ECC code that matches what is currently in the |
| Davinci git repository (since NAND support was added in 2.6.24). |
| This makes the ECC and OOB layout written by u-boot compatible with |
| Linux for both small page and large page devices and fixes ECC |
| correction for large page devices. |
| |
| The old behaviour can be restored by defining the macro |
| CFG_DAVINCI_BROKEN_ECC, which is undefined by default. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Acked-by: Sergey Kubushyn <ksi@koi8.net> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Sep 10 11:15:28 2008 +0200 |
| |
| muas3001: update BR4 settings |
| |
| Also set up the port pins for using I2C. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 3591293509e0c0bcf244b0f974775bff2e25697e |
| Author: Petri Lehtinen <petri.lehtinen@inoi.fi> |
| Date: Wed Sep 10 09:43:49 2008 +0300 |
| |
| autoscr: Fix one-character lines and non-newline terminated scripts |
| |
| When not using hush, the autoscr command now executes lines that are |
| only one character long. It also runs the last line of scripts even if |
| it does not end in a newline. |
| |
| Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi> |
| |
| commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985 |
| Author: Victor Gallardo <vgallardo@amcc.com> |
| Date: Tue Sep 9 15:13:29 2008 -0700 |
| |
| ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR |
| |
| On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands |
| and glacier. |
| |
| Signed-off-by: Victor Gallardo <vgallardo@amcc.com> |
| |
| commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Mon Sep 8 10:21:11 2008 +0200 |
| |
| muas3001: added support for the LM75 sensor. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Mon Sep 8 10:20:19 2008 +0200 |
| |
| muas3001: activate WDT for the muas3001 board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Mon Sep 8 10:19:36 2008 +0200 |
| |
| muas3001: added 64MB SDRAM autodetection. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 5251469943895de4bb9a04d5053352cc22acb7d5 |
| Author: Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| Date: Thu Aug 21 07:12:26 2008 -0700 |
| |
| Fix printf errors under -DDEBUG |
| |
| Fix printf format-string/arg mismatches under -DDEBUG. |
| |
| These warnings occur with DEBUG defined for a platform using |
| cpu/mpc85xx. Users of other architectures can unearth similar |
| problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right |
| after "CFLAGS += $(call cc-option,-fno-stack-protector)". |
| |
| Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 9 23:55:18 2008 +0200 |
| |
| Update CHANGELOG, prepare 2008-10-rc1 release |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Sep 8 08:51:29 2008 -0500 |
| |
| 85xx: Ensure timebase is zero on secondary cores |
| |
| The e500um says the timebase is volatile out of reset. To ensure |
| TB sync works we need to make sure its zero. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 54b4ab3c961a2012a1c2a09c259a6343323ec551 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Sep 9 22:18:24 2008 +0200 |
| |
| bootm_load_os: fix load_end debug message |
| |
| print load_end value not pointer |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1d9af0be764960e6cc1c093e97176c3542796820 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Sep 9 22:18:23 2008 +0200 |
| |
| bootm: enable fdt support only on ppc, m68k and sparc |
| |
| ...as done in image.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 748b5274e76f81df85cfcffaffedc323678d0623 |
| Author: Markus Heidelberg <markus.heidelberg@web.de> |
| Date: Tue Sep 9 18:51:05 2008 +0200 |
| |
| common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY) |
| |
| Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> |
| |
| commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c |
| Author: Markus Heidelberg <markus.heidelberg@web.de> |
| Date: Tue Sep 9 17:31:46 2008 +0200 |
| |
| gitignore: add tags files and Vim swap file |
| |
| Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> |
| |
| commit 1d9b67b23fca6a25154333733204339802510720 |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Tue Sep 9 17:52:47 2008 +0900 |
| |
| add board_eth_init() for sh7785lcr board |
| |
| Fix the problem that cannot work RTL8169 on sh7785lcr board. |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| |
| commit 7b7a869a8ba3bd6d9bffb748c91232141330f514 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 6 16:08:41 2008 -0500 |
| |
| mtd: SPI Flash: Support the STMicro Flash |
| |
| Add MTD SPI Flash support for M25P16, M25P20, M25P32, |
| M25P40, M25P64, M25P80, M25P128. |
| |
| Signed-off-by: Jason McMullan <mcmullan@netapp.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 4bc07c368076560ed7fa4c9f987c71a8521488a9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 9 17:55:31 2008 +0200 |
| |
| trab: fix build problem after change to use do_div() |
| |
| We must link with libgeneric now. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011 |
| Author: Ryan CHEN <ryan.chen@st.com> |
| Date: Wed Aug 20 13:00:17 2008 -0400 |
| |
| Correct drv_usb_kbd_init function |
| |
| The patch is that check if usb_get_dev_index() function return valid |
| pointer. If valid, continue. Otherwise return -1. |
| |
| Signed-off-by: Ryan Chen <ryan.chen@st.com> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit eba1f2fc75f128a9a6c1328d786996a93fd7a707 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Wed Aug 20 11:22:02 2008 +0200 |
| |
| Make usb-stop() safe to call multiple times in a row. |
| |
| A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38) |
| enabled the usb_stop() command in common/cmd_bootm.c which was |
| not enabled for some time, because no board did actually set the |
| CFG_CMD_USB flag. So, now the usb_stop() is executed before |
| loading the linux kernel. |
| |
| However, the usb_ohci driver hangs up (at least on AT91SAM) if the |
| driver is stopped twice (e.g. the peripheral clock is stopped on AT91). |
| If some other piece of code calls usb_stop() before the bootm command, |
| this command will hangup the system during boot. |
| (usb start and stop is typically used while booting from usb memory stick) |
| |
| But, stopping the usb stack twice is useless anyway, and a flag already |
| existed that kept track on the usb_init()/usb_stop() calls. |
| So, we now check if the usb stack is really started before we stop it. |
| |
| This problem is now fixed in both the upper as low-level layer. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 9 16:55:47 2008 +0200 |
| |
| Makefile: fix bug introduced by commit 47ffd6c2 |
| |
| commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Tue Sep 9 10:00:33 2008 -0400 |
| |
| ppc4xx: ppc440-generic-ALL: Fix out of tree build v2 |
| |
| This patch solves the problems compiling ml507, v5fx30teval and |
| ppc440-generic out of tree. |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| |
| commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb |
| Author: NÃÂcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br> |
| Date: Thu Sep 4 15:35:46 2008 -0300 |
| |
| Fix dev_print when called from usb_stor_info (usb storage command) |
| |
| Fix output of the usb storage command. It was printing "Device 0: not |
| available" because IF_TYPE_USB was not included into the switch |
| statement. |
| |
| Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br> |
| |
| commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Sep 9 12:58:16 2008 +0200 |
| |
| FIT: make iminfo check hashes of all images in FIT, return 1 on failed check |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 919f550dc11a13abf01c6bc713c968de790b8d7c |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Sep 9 12:58:15 2008 +0200 |
| |
| FIT: add ability to check hashes of all images in FIT, improve output |
| |
| - add function fit_all_image_check_hashes() that verifies if all |
| hashes of all images in the FIT are valid |
| - improve output of fit_image_check_hashes() when the hash check fails |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 1de1fa408967cef6804bb046b904114519bb36f0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Sep 8 20:54:39 2008 +0200 |
| |
| qemu_mips: Update linux bootm to support dynamic cmdline |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Mon Sep 8 14:56:49 2008 -0500 |
| |
| Add support for booting of INTEGRITY operating system uImages |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Sep 8 21:01:29 2008 +0200 |
| |
| mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start" |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9ba2e2c8191353d75b2d535e672a125be7b84c03 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Sep 8 13:57:12 2008 -0500 |
| |
| Remove support for booting ARTOS images |
| |
| Pantelis Antoniou stated: |
| AFAIK, it is still used but the products using PPC are long gone. |
| Nuke it plz (from orbit). |
| |
| So remove it since it cleans up a usage of env_get_char outside of |
| the environment code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 9 15:45:18 2008 +0200 |
| |
| Makefile: compile and link each module just once |
| |
| Several source files need to be compiled and linked when one or more |
| config options are selected. To allow for easy selection in the |
| Makefiles yet to avoild multiple compilation (which costs build time) |
| and especially multiple linking (which causes errors), we use |
| "COBJS = $(sort COBJS-y)" which eliminates duplicates. |
| |
| By courtesy of Detlev Zundel who suggested this approach. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 48d0192fe869948fef14b460b5f0c85bca933693 |
| Author: Andreas Engel <andreas.engel@ericsson.com> |
| Date: Mon Sep 8 14:30:53 2008 +0200 |
| |
| Moved conditional compile into Makefile |
| |
| Signed-off-by: Andreas Engel <andreas.engel@ericsson.com> |
| |
| commit 20c9226cb8cab08a111ee73db04e62d943ee0c97 |
| Author: Andreas Engel <andreas.engel@ericsson.com> |
| Date: Mon Sep 8 10:17:31 2008 +0200 |
| |
| Merged serial_pl010.c and serial_pl011.c. |
| |
| They only differ in the init function. |
| This also adds the missing watchdog support for the PL011. |
| |
| Signed-off-by: Andreas Engel <andreas.engel@ericsson.com> |
| |
| commit 0817d688f307ee2c0598e79175c94a40ce90337b |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Sun Sep 7 17:10:27 2008 -0400 |
| |
| Remove gap fill in srec object v2 |
| |
| SREC files do not need gap fill: The load address is specified in the |
| file. On the other hand, it can't be avoided in a .bin object. It has |
| no information about memory location. |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| |
| commit 1dc306931ca5ce87f13916fa7165b052d3aa714f |
| Author: Markus Heidelberg <markus.heidelberg@web.de> |
| Date: Sun Sep 7 20:18:27 2008 +0200 |
| |
| README: fix missing subdirectory in the documentation |
| |
| Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> |
| |
| commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd |
| Author: Graeme Russ <graeme.russ@gmail.com> |
| Date: Sun Sep 7 07:08:42 2008 +1000 |
| |
| Update i386 code (sc520_cdp) |
| |
| Attempt to bring i386 / sc520 inline with master |
| |
| Signed-off-by: Graeme Russ <graeme.russ@gmail.com> |
| |
| commit 5608692104efa8d56df803dc79ea41ac3607eee5 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Sep 4 13:01:49 2008 +0200 |
| |
| fw_env: add NAND support |
| |
| Add support for environment in NAND with automatic NOR / NAND recognition, |
| including unaligned environment, bad-block skipping, redundant environment |
| copy. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 9 09:50:24 2008 +0200 |
| |
| ppc4xx: Fix out-of-tree building of CPCI405 variants |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 59f630588e3fdbd698a0a2798e52a8924e899563 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Aug 15 15:42:11 2008 +0200 |
| |
| Removed hardcoded MxMR loop value from upmconfig() for MPC85xx. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit e64987a892353f3d49eb242d997820ef8f538912 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Aug 15 15:42:13 2008 +0200 |
| |
| 85xx: socrates: Enable Lime support. |
| |
| This patch adds Lime GDC support together with support for the PWM |
| backlight control through the w83782d chip. The reset pin of the |
| latter is attached to GPIO, so we need to reset it in |
| early_board_init_r. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 3e79b588b5199f35016f178fc0d5d1266382097f |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Aug 15 15:42:12 2008 +0200 |
| |
| 85xx: Socrates: Major code update. |
| |
| - Update the local bus ranges in the FDT for Linux for the various |
| devices connected to the local bus via chip-select. |
| |
| - Set the LCRR_DBYP bit in the LCRR for local bus frequencies |
| lower than 66 MHz and uses I/O accessor functions consequently. |
| |
| - UPM data update. |
| |
| - Update of default environment and configuration. Use I2C multibus |
| as we do have two I2C buses. Also enable sdram and ext2 commands. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit e8d18541c6ceab821f75faab031740b33fdbfa4b |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Jul 18 16:52:23 2008 +0200 |
| |
| Update Freescale 85xx boards to sys_eeprom.c |
| |
| The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID |
| format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale |
| 86xx boards already use sys_eeprom.c, so this patch migrates the remaining |
| Freescale 85xx boards to use it as well. cds_eeprom.c is deleted. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 9 10:08:02 2008 +0200 |
| |
| lib_ppc/interrupts.c: make board_show_activity() a weak function |
| |
| This allows to use show_activity() without having to |
| define an empty board_show_activity() function. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fe876787f8743883ce58fed61525eaa2f34da4c5 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 9 10:06:44 2008 +0200 |
| |
| stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 965de106ba8900372c8b16dc60d5acab7f925e38 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 9 10:03:47 2008 +0200 |
| |
| NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Aug 15 15:42:11 2008 +0200 |
| |
| Removed hardcoded MxMR loop value from upmconfig() for MPC85xx. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 36241ca29d4804a1006fb3f26069effda5202581 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Aug 15 15:42:13 2008 +0200 |
| |
| 85xx: socrates: Enable Lime support. |
| |
| This patch adds Lime GDC support together with support for the PWM |
| backlight control through the w83782d chip. The reset pin of the |
| latter is attached to GPIO, so we need to reset it in |
| early_board_init_r. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Aug 15 15:42:12 2008 +0200 |
| |
| 85xx: Socrates: Major code update. |
| |
| - Update the local bus ranges in the FDT for Linux for the various |
| devices connected to the local bus via chip-select. |
| |
| - Set the LCRR_DBYP bit in the LCRR for local bus frequencies |
| lower than 66 MHz and uses I/O accessor functions consequently. |
| |
| - UPM data update. |
| |
| - Update of default environment and configuration. Use I2C multibus |
| as we do have two I2C buses. Also enable sdram and ext2 commands. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Sep 9 01:22:39 2008 +0200 |
| |
| disk-on-chip: remove duplicate doc_probe declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Sep 9 00:59:40 2008 +0200 |
| |
| onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Sep 9 00:59:39 2008 +0200 |
| |
| rs5c372: fix rtc_set prototype |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Thu Aug 14 14:08:28 2008 +0200 |
| |
| ARM: fix warning: target CPU does not support interworking |
| |
| This patch fixes warnings like this: |
| |
| start.S:0: warning: target CPU does not support interworking |
| |
| which come from some ARM cross compilers and are caused by hard-coded |
| (with "--with-cpu=arm9" configuration option) ARM targets (which |
| support ARM Thumb instructions), while the ARM target selected from |
| the command line (with "-march=armv4") doesn't support Thumb |
| instructions. |
| |
| This warning is issued by the compiler regardless of the real use of |
| the Thumb instructions in code. |
| |
| To fix this problem, we use options according to compiler version |
| being used. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4265c35fbcb248e58179007621d61d32d0b3b82a |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Thu Aug 14 14:08:28 2008 +0200 |
| |
| ARM: Use do_div() instead of division for "long long". |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8febd13c69cb68652577d1a9fcbde954bf784155 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Jul 18 16:52:23 2008 +0200 |
| |
| Update Freescale 85xx boards to sys_eeprom.c |
| |
| The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID |
| format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale |
| 86xx boards already use sys_eeprom.c, so this patch migrates the remaining |
| Freescale 85xx boards to use it as well. cds_eeprom.c is deleted. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 1055171ed05b7c4885737463d52b8d6c013bcb5d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 8 23:26:22 2008 +0200 |
| |
| lib_arm/bootm.c: fix compile warnings |
| |
| bootm.c:128: warning: label 'error' defined but not used |
| bootm.c:65: warning: unused variable 'ret' |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2e3c867d0a63c563a51e65b776973b008f16cec5 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 8 22:46:42 2008 +0200 |
| |
| ml507: fix out of tree build problem |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 8 22:10:28 2008 +0200 |
| |
| common/cmd_bootm.c: fix printf() format warnings |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 8 22:37:45 2008 +0200 |
| |
| BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings |
| |
| missing doc_probe() prototype. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2c5e3cc4994897d364b148942ff23e47783198f6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 8 21:28:14 2008 +0200 |
| |
| mk48t59: fix compile problem introduced by commit d1e23194 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5ff889349d2ace13f10c9335e09365fcec8247cc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Sep 8 14:11:12 2008 +0200 |
| |
| ppc4xx: Move ppc4xx specific prototypes to ppc4xx header |
| |
| This patch moves some 4xx specific prototypes out of include common.h |
| to a ppc4xx specific header. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ac53ee8318678190bf3c68da477a84a657d86fb0 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Sep 5 15:34:04 2008 +0200 |
| |
| ppc4xx: Update CPCI405(AB) configuration |
| |
| This patch add FDT support and command line editing capabilities |
| for CPCI405 and CPCI405AB boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Sep 5 15:34:03 2008 +0200 |
| |
| ppc4xx: Cleanup CPCI405 linker script |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Sep 5 15:34:02 2008 +0200 |
| |
| ppc4xx: Update CPCI405 variants handling |
| |
| This patch replaces the BOARD_REVISION variable in include/config.mk |
| by a using a temporary include file in the platform directory. |
| |
| The former way does not work anymore and the latter is also used by |
| some other boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f071f01fd09e9bf1cf09de37a7416aacce71bae1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Sep 8 10:01:48 2008 +0200 |
| |
| ppc4xx: Remove CONFIG_CS8952_PHY define |
| |
| Since this define is only used on one board that was never really in |
| production, removing this compile time option doesn't hurt and makes |
| the code more readable. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Sep 5 14:11:40 2008 +0200 |
| |
| ppc4xx: Fix compilation warning for PIP405 |
| |
| This patch fixes a compilation warning for the PIP405 board. It moves the |
| #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't |
| occur anymore. I am a little unsure if this #ifdef is at the correct |
| place now or if it could be removed completely. This needs to get |
| tested on the PIP405 board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 725b53ac61f4df3026b8f6489ef0080fd27d3816 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Sep 5 14:09:09 2008 +0200 |
| |
| ppc4xx: Fix compilation warning for canyonlands & glacier |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Sep 5 14:40:29 2008 -0500 |
| |
| Fix compiler warning in mpc8xxx ddr code |
| |
| ctrl_regs.c: In function 'compute_fsl_memctl_config_regs': |
| ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function |
| ctrl_regs.c:523: note: 'caslat' was declared here |
| |
| Add a warning in DDR1 case if cas_latency isn't a value we know about. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d1e2319414ea5218ba801163e4530ecf2dfcbf36 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Sep 1 23:06:23 2008 +0200 |
| |
| rtc: allow rtc_set to return an error and use it in cmd_date |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Sep 1 01:16:33 2008 +0200 |
| |
| ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6b971c73f182248ce103503d74fbc0100bb8c8b7 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sun Aug 31 05:37:04 2008 +0900 |
| |
| config.mk: Move arch-specific condition to $(ARCH)_config.mk |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 29 19:08:29 2008 -0500 |
| |
| Prevent crash if random/invalid ramdisks are passed to bootm |
| |
| Adds returning an error from the ramdisk detection code if |
| its not a real ramdisk (invalid). There is no reason we can't |
| just return back to the console if we detect an invalid |
| ramdisk or CRC error. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Aug 29 21:04:45 2008 +0200 |
| |
| Prevent crash if random DTB address is passed to bootm |
| |
| This patch adds bootm_start() return value check. If |
| error status is returned, we do not proceed further to |
| prevent board reset or crash as we still can recover |
| at this point. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8 |
| Author: Andrew Dyer <adyer@righthandtech.com> |
| Date: Fri Aug 29 12:30:39 2008 -0500 |
| |
| clean up some #if !defined() in drivers/video/cfb_console.c |
| |
| rearrange some #if !defined() / #else / #endif statements to remove |
| the negative logic. |
| |
| Signed-off-by: Andrew Dyer <adyer@righthandtech.com> |
| |
| commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Fri Aug 29 09:02:20 2008 +0900 |
| |
| apollon: use the last memory area for u-boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Aug 28 13:50:42 2008 +0200 |
| |
| TQM8272: move NAND part in seperate File |
| |
| I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver, |
| because I have no longer access to the hardware. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 584f979f7ee914e32d408739cbdd2c4457ec18b8 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Aug 28 13:48:36 2008 +0200 |
| |
| TQM8272: Fix compiling error for the TQM8272 board. |
| |
| Fix compile problems caused by |
| commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 1a7f8ccec981648ccd38fca2535490582eee08e6 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Wed Aug 27 14:45:20 2008 +0900 |
| |
| Add JFFS2 command support on OneNAND |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit f5c3ba79788b0e39baab7026d374fe375dd1a43f |
| Author: Mark Jackson <mpfj@mimc.co.uk> |
| Date: Mon Aug 25 19:21:30 2008 +0100 |
| |
| Allow console input to be disabled |
| |
| Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE. |
| |
| When CONFIG_DISABLE_CONSOLE is defined, setting |
| GD_FLG_DISABLE_CONSOLE disables all console input and output. |
| |
| Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> |
| |
| commit 2b22d608f370565c87f55928b524207031419c11 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Wed Jul 30 12:39:29 2008 +0200 |
| |
| loads: allow negative offsets |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| |
| commit e90fb6afab2c0c074dfb67bacb4de179eb188a24 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Sep 4 11:19:05 2008 +0200 |
| |
| USB EHCI: reset root hub |
| |
| Some of multi-function USB controllers (e.g. ISP1562) allow root hub |
| resetting only via EHCI registers. So, this patch adds the |
| corresponding kind of reset to OHCI's hc_reset() if the newly |
| introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates |
| board). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 5875d358f025c1b042d8a0f08384b756de7256c9 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Fri Aug 15 15:42:09 2008 +0200 |
| |
| RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get(). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 3e3c026ed746a284c6f0ef139b26d859939de7e9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Sep 5 10:47:46 2008 +0200 |
| |
| devices: Use list_add_tail() instead of list_add() to register a device |
| |
| This patch fixes a problem spotted on Glacier/Canyonlands (and most |
| likely lots of other board ports), that no serial output was seen |
| after console initialization in console_init_r(). This is because the |
| last added console device was used instead of the first added. |
| |
| This patch fixes this problem by using list_add_tail() instead of |
| list_add() to register a device. This way the first added console |
| is used again. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 78d78236896d62bb8ca7302af38d8f1493eb2651 |
| Author: Victor Gallardo <vgallardo@amcc.com> |
| Date: Thu Sep 4 23:49:36 2008 -0700 |
| |
| ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY |
| |
| This patch adds GPCS, SGMII and M88E1112 PHY support |
| for the AMCC PPC460GT/EX processors. |
| |
| Signed-off-by: Victor Gallardo <vgallardo@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765 |
| Author: Adam Graham <agraham@amcc.com> |
| Date: Wed Sep 3 12:26:59 2008 -0700 |
| |
| ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines |
| |
| Signed-off-by: Adam Graham <agraham@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 075d0b81e896e8735ae26372cd384f87cbd24e41 |
| Author: Adam Graham <agraham@amcc.com> |
| Date: Wed Sep 3 12:26:28 2008 -0700 |
| |
| ppc4xx: IBM Memory Controller DDR autocalibration routines |
| |
| Alternate SDRAM DDR autocalibration routine that can be generically used |
| for any PPC4xx chips that have the IBM SDRAM Controller core allowing for |
| support of more DIMM/memory chip vendors and gets the DDR autocalibration |
| values which give the best read latency performance (SDRAM0_RDCC.[RDSS]). |
| |
| Two alternate SDRAM DDR autocalibration algoritm are provided in this patch, |
| "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range |
| of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a |
| lot longer to run than Method_B. Method_B executes in the same amount of time |
| as the currently existing DDR autocalibration routine, i.e. 1 second or so. |
| Normally Method_B is used and it is set as the default method. |
| |
| The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM |
| Controller registers.[bit-field]: |
| 1) SDRAM0_RQDC.[RQFD] |
| 2) SDRAM0_RFDC.[RFFD] |
| |
| This alternate PPC4xx DDR autocalibration code calibrates the following |
| IBM SDRAM Controller registers.[bit-field]: |
| |
| 1) SDRAM0_WRDTR.[WDTR] |
| 2) SDRAM0_CLKTR.[CKTR] |
| 3) SDRAM0_RQDC.[RQFD] |
| 4) SDRAM0_RFDC.[RFFD] |
| |
| and will also use the calibrated settings of the above four registers that |
| produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS] |
| register.[bit-field]. |
| |
| Signed-off-by: Adam Graham <agraham@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e07f4a8033b6270b8103049adb6456f660ff4a89 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Mon Sep 1 13:09:39 2008 -0400 |
| |
| ppc44x: Unification of virtex5 pp440 boards |
| |
| This patch provides an unificated way of handling xilinx v5 ppc440 boards. |
| |
| It unificates 3 different things: |
| |
| 1) Source code |
| A new board called ppc440-generic has been created. This board includes |
| a generic tlb initialization (Maps the whole memory into virtual) and |
| defines board_pre_init, checkboard, initdram and get_sys_info weakly, |
| so, they can be replaced by specific functions. |
| |
| If a new board needs to redefine any of the previous functions |
| (specific initialization) it can create a new directory with the |
| specific initializations needed. (see the example ml507 board). |
| |
| 2) Configuration file |
| Common configurations are located under configs/xilinx-ppc440.h, this |
| header file interpretes the xparameters file generated by EDK and |
| configurates u-boot in correspondence. Example: if there is a Temac, |
| allows CMD_CONFIG_NET |
| Specific configuration are located under specific configuration file. |
| (see the example ml507 board) |
| |
| 3) Makefile |
| Some work has been done in order to not duplicate work in the Main |
| Makefile. Please see the attached code. |
| |
| In order to support new boards they can be implemented in the next way: |
| |
| a) Simple Generic Board (90% of the time) |
| Using EDK generates a new xparameters.h file, replace |
| ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config |
| && make |
| |
| b) Simple Boards with special u-boot parameters (9 % of the time) |
| Create a new file under configs for it (use ml507.h as example) and |
| change your paramaters. Create a new Makefile paragraph and compile |
| |
| c) Complex boards (1% of the time) |
| Create a new folder for the board, like the ml507 |
| |
| Finally, it adds support for the Avnet FX30T Evaluation board, following |
| the new generic structure: |
| |
| Cheap board by Avnet for evaluating the Virtex5 FX technology. |
| |
| This patch adds support for: |
| - UartLite |
| - 16MB Flash |
| - 64MB RAM |
| |
| Prior using U-boot in this board, read carefully the ERRATA by Avnet |
| to solve some memory initialization issues. |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 64ac1eb5afafced49b327425ad1814b2dc422d6e |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Tue Sep 2 15:21:16 2008 -0500 |
| |
| mpc83xx: fix mpc8313 in-tree building with NAND |
| |
| and add mpc8313 NAND build to MAKEALL |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3 |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Thu Aug 28 14:09:25 2008 -0700 |
| |
| mpc83xx: clean up cache operations and unlock_ram_in_cache() functions |
| |
| Cleans up some latent issues with the data cache control so that |
| dcache_enable() and dcache_disable() will work reliably (after |
| unlock_ram_in_cache() has been called) |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 46497056ae3b1e81e736e9cf3a170472c5d9719f |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Thu Aug 28 14:09:19 2008 -0700 |
| |
| mpc83xx: Store and display Arbiter Event Register values |
| |
| Record the Arbiter Event Register values and optionally display them. |
| |
| The Arbiter Event Register can record the type and effective address of |
| an arbiter error, even through an HRESET. This patch stores the values in |
| the global data structure. |
| |
| Display of the Arbiter Event registers immediately after the RSR value |
| can be enabled with defines. The Arbiter values will only be displayed |
| if an arbiter event has occured since the last Power On Reset, and either |
| of the following defines exist: |
| #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and |
| and type register values |
| #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter |
| event register values |
| |
| Address Only transactions are one of the trapped events that can register |
| as an arbiter event. They occur with some cache manipulation instructions |
| if the HID0_ABE (Address Broadcast Enable) is set and the memory region |
| has the MEMORY_COHERENCE WIMG bit set. Setting: |
| #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address |
| only events, so that it can still capture |
| other real problems. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605 |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Thu Aug 28 14:09:11 2008 -0700 |
| |
| mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache |
| |
| This is needed in unlock_ram_in_cache() because it is called from C and |
| will corrupt the small data area anchor that is kept in R2. |
| |
| lock_ram_in_cache() is modified similarly as good coding practice, but |
| is not called from C. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9 |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Fri Aug 22 23:52:50 2008 -0700 |
| |
| MPC83XX: Fix GPIO configuration - set gpio level before direction |
| |
| Set DAT value before DIR values to avoid creating glitches on the |
| GPIO signals. |
| |
| Set gpio level register before direction register to inhibit |
| glitches on high level output pins. |
| |
| Dir and data gets cleared at powerup, so high level output lines see |
| a short low pulse between setting the direction and level registers. |
| |
| Issue was seen on a new board with the nReset line of the NOR flash |
| connected to a GPIO. Setting the direction register puts the NOR flash |
| in reset so the next instruction to set the level cannot get executed. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 7007c5975ee900ad70983b0681d3251e221f8321 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Sep 2 02:58:32 2008 +0200 |
| |
| doc/qemu_mips: add doc howto debug u-boot with gdb |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Sep 3 17:15:45 2008 +0200 |
| |
| ppx4xx: Fix broken DASA_SIM board |
| |
| This patch adds initdram() to DASA_SIM boards that has been |
| removed accidentally by a previous commit. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Sep 1 08:35:37 2008 +0200 |
| |
| ppc4xx: Remove reference to common/lists.o from some esd linker scripts |
| |
| This patch removes some direct references to common/lists.o from some |
| esd linker scripts. This is necessary because the lists source was moved |
| and is not in the "common" directory anymore. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 97b0734d65f8a0b03df0a335a2addc759da56107 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 16:33:05 2008 +0200 |
| |
| ppc4xx: Remove obsolete or unused functions from some esd boards |
| |
| This patch removes initdram() and testdram() from most esd 405 platforms. |
| Some boards also have an empty dummy implementation of |
| misc_init_f(). This is also removed. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 15:07:54 2008 +0200 |
| |
| ppc4xx: Update VOM405 board configuration |
| |
| - remove PCI code |
| - add command line editing |
| - minor cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 15:07:53 2008 +0200 |
| |
| ppc4xx: Remove obsolete initdram() function from VOM405 board |
| |
| This patch removed the obsolete initdram() function from |
| VOM405 platform file. |
| |
| Some minor cleanup. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 15:07:52 2008 +0200 |
| |
| ppc4xx: Cleanup VOM405 linker script |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2 |
| Author: Matthias Fuchs <mf@esd.eu> |
| Date: Tue Sep 2 15:07:51 2008 +0200 |
| |
| ppc4xx: Add fdt support for VOM405 boards |
| |
| Signed-off-by: Matthias Fuchs <mf@esd.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 11:36:14 2008 +0200 |
| |
| ppc4xx: Coding style cleanup |
| |
| Wrap long lines etc. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 11:35:56 2008 +0200 |
| |
| ppc4xx: Enable USB on PLU405 boards |
| |
| This patch enables the PCI-OHCI controller on PLU405 board. |
| |
| Also the default CPU frequency is updated to 266 MHz and |
| command line editing is enabled. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 11:35:35 2008 +0200 |
| |
| ppc4xx: Cleanup PLU405 platform file |
| |
| This patch |
| - wraps some long lines |
| - removes unused/obsolete functions: misc_init_f() and initdram() |
| |
| Signed-off-by: Matthias Fuchs <mf@esd.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 11:35:04 2008 +0200 |
| |
| ppc4xx: Cleanup PLU405 linker script |
| |
| Signed-off-by: Matthias Fuchs <mf@esd.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3bc1054cec2f6b25822f301ea922a16233baa4c7 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 11:34:36 2008 +0200 |
| |
| ppc4xx: Add fdt support for PLU405 boards |
| |
| Signed-off-by: Matthias Fuchs <mf@esd.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 2 11:34:08 2008 +0200 |
| |
| ppc4xx: Increase U-Boot size to 384kB for PLU405 boards |
| |
| Signed-off-by: Matthias Fuchs <mf@esd.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit be1b0d2777e179191a57b138b660547a17e55aad |
| Author: Jochen Friedrich <jochen@scram.de> |
| Date: Tue Sep 2 11:24:59 2008 +0200 |
| |
| Don't tftp to unknown flash |
| |
| If a board has a variable number of flash banks, there are empty entries |
| in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with |
| "Outside available Flash". This patch skips flash banks with unknown |
| flash ids. |
| |
| Signed-off-by: Jochen Friedrich <jochen@scram.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Aug 28 13:40:44 2008 +0900 |
| |
| net: smc911x: Add pkt_data_pull and pkt_data_push function |
| |
| The RSK7203 board has the SMSC9118 wired up 'incorrectly'. |
| Byte-swapping is necessary, and so poor performance is inevitable. |
| This problem cannot evade by the swap function of CHIP, this can |
| evade by software Byte-swapping. |
| And this has problem by FIFO access only. pkt_data_pull/pkt_data_push |
| functions necessary to solve this problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 20:37:00 2008 -0700 |
| |
| Moved initialization of EEPRO100 Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| db64360 |
| db64460 |
| katmai |
| taihu |
| taishan |
| yucca |
| cpc45 |
| cpu87 |
| eXalion |
| elppc |
| debris |
| kvme080 |
| mpc8315erdb |
| integratorap |
| ixdp425 |
| oxc |
| pm826 |
| pm828 |
| pm854 |
| pm856 |
| ppmc7xx |
| sc3 |
| sc520_spunk |
| sorcery |
| tqm8272 |
| tqm85xx |
| utx8245 |
| |
| Removed initialization of the driver from net/eth.c |
| Also, wrapped contents of pci_eth_init() by CONFIG_PCI. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:45:44 2008 -0700 |
| |
| Moved initialization of TULIP Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| cu824 |
| bab7xx |
| adciop |
| dasa_sim |
| mousse |
| mpc8540eval |
| musenki |
| mvblue |
| pcippc2/pcippc6 |
| sbc8240 |
| stxssa |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit ad3381cf4167120db5c7b88e4970245e1d5c0a32 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:44:19 2008 -0700 |
| |
| Moved initialization of E1000 Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| ap1000 |
| mvbc_p |
| PM854 |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:40:51 2008 -0700 |
| |
| Moved initialization of plb2800 Ethernet driver to board_eth_init |
| |
| Affected boards: |
| purple |
| |
| Removed initialization of controller from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:39:12 2008 -0700 |
| |
| Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory |
| |
| Modified board_eth_init() functions of boards that have this FEC in addition |
| to other Ethernet controllers. |
| |
| Affected boards: |
| bc3450 |
| icecube |
| mvbc_p |
| o2dnt |
| pm520 |
| total5200 |
| tq5200 |
| |
| Removed initialization of controller from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:36:38 2008 -0700 |
| |
| Moved initialization of MPC512x_FEC Ethernet driver to CPU directory |
| |
| Added a cpu_eth_init() function to MPC512x CPU directory and |
| removed code from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 8218bd2aa68820b878a8413493ae17fd8d21f944 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:16:59 2008 -0700 |
| |
| Moved initialization of IncaIP Ethernet controller to board_eth_init |
| |
| Affected boards: |
| IncaIP |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:15:26 2008 -0700 |
| |
| Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init() |
| |
| Affected boards: |
| AmigaOneG3SE |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 6aca145e067efe75398e9fac97822bd3700de0b2 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:13:34 2008 -0700 |
| |
| Moved initialization of GT6426x Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| EVB64260 |
| P3G4 |
| ZUMA |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit e3090534d62045dcb73f5392bacc64a4e8e443dc |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:08:43 2008 -0700 |
| |
| Moved initialization of PCNET Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| PN62 |
| sc520_cdp |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:07:16 2008 -0700 |
| |
| Moved initialization of NATSEMI Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| a3000 |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 19403633dd70333893c2da7926a1d0dcd6dab7d8 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 10:03:22 2008 -0700 |
| |
| Moved initialization of NS8382X Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| bc3450 |
| cpci5200 |
| mecp5200 |
| pf2000 |
| icecube |
| o2dnt |
| pm520 |
| sandpoint8245 |
| total5200 |
| tqm5200 |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 09:59:33 2008 -0700 |
| |
| Moved initialization of TSI108 Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| mpc7448hpc2 |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 0b252f50ae218ae15bfb63af44227972686ebc56 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 21:41:08 2008 -0700 |
| |
| Moved initialization of RTL8139 Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| hidden_dragon |
| MPC8544DS |
| MPC8610HPCN |
| R2DPLUS |
| TB0229 |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 09:49:42 2008 -0700 |
| |
| Moved initialization of RTL8169 Ethernet controller to board_eth_init() |
| |
| Affected boards: |
| linkstation |
| r7780mp |
| |
| Removed initialization of the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3ae071e44256144d6c1e3febb65f6c56bd433769 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Tue Aug 12 22:11:53 2008 -0700 |
| |
| Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init() |
| |
| Removed at91sam9_eth_initialize() from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Aug 31 22:22:04 2008 -0700 |
| |
| Introduce netdev.h header file and remove externs |
| |
| This addresses all drivers whose initializers have already |
| been moved to board_eth_init()/cpu_eth_init(). |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sun Aug 31 16:33:30 2008 -0500 |
| |
| Add pixis_set_sgmii command |
| |
| The 8544DS and 8572DS platforms support an optional SGMII riser card to |
| expose ethernet over an SGMII interface. Once the card is in, it is also |
| necessary to configure the board such that it uses the card, rather than |
| the on-board ethernet ports. This can either be done by flipping dip switches |
| on the motherboard, or by modifying registers in the pixis. Either way |
| requires a reboot. |
| |
| This adds a command to allow users to choose which ports are routed through |
| the SGMII card, and which through the onboard ports. It also allows users |
| to revert to the current switch settings. |
| |
| This code does not work on the 8572, as the PIXIS is different. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sun Aug 31 16:33:29 2008 -0500 |
| |
| Add SGMII support for the 8544 DS |
| |
| The 8544 DS has an optional SGMII Riser card, which uses different PHY |
| addresses. Check if we are in SGMII mode, and invoke the SGMII Riser |
| setup code if so. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 652f7c2eef76a1340928bd660845441e932d86a2 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sun Aug 31 16:33:28 2008 -0500 |
| |
| Add support for Freescale SGMII Riser Card |
| |
| The 8544DS and 8572DS systems have an optional SGMII riser card which |
| exposes new ethernet ports which are connected to the eTSECs via an |
| SGMII interface. The SGMII PHYs for this board are offset from the standard |
| PHY addresses, so this code modifies the passed in tsec_info structure to |
| use the SGMII PHYs on the card, instead. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 2abe361c03b43e6dcf68f54e96b5c05156c49284 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sun Aug 31 16:33:27 2008 -0500 |
| |
| Add SGMII support to the tsec |
| |
| Adds support for configuring the TBI to talk properly with the SerDes. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sun Aug 31 16:33:26 2008 -0500 |
| |
| Pass in tsec_info struct through tsec_initialize |
| |
| The tsec driver contains a hard-coded array of configuration information |
| for the tsec ethernet controllers. We create a default function that works |
| for most tsecs, and allow that to be overridden by board code. It creates |
| an array of tsec_info structures, which are then parsed by the corresponding |
| driver instance to determine configuration. Also, add regs, miiregs, and |
| devname fields to the tsec_info structure, so that we don't need the kludgy |
| "index" parameter. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sun Aug 31 16:33:25 2008 -0500 |
| |
| tsec: Move tsec.h to include/ |
| |
| This is to prepare the way for board code passing in the tsec_info structure |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d23dc394aa69093b6326ad917db04dc0d1aff3f8 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Jun 6 15:52:44 2008 +0200 |
| |
| PHY: Add support for the M88E1121R Marvell chip. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 2 21:17:36 2008 +0200 |
| |
| fw_env.c: fix build problems with MTD_VERSION=old |
| |
| (as needed to support old 2.4 Linux kernel based releases) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Sep 1 17:11:26 2008 +0200 |
| |
| device: make device_register() clone the device |
| |
| This is expected by the callers, but this fact was hidden well within |
| the old list implementation. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c75e772a2f061a508bba28ded1b5bea91f0442b0 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Aug 31 23:28:15 2008 +0900 |
| |
| sh: Remove CC line from board's Makefile |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 468eae0660de6fdfd9999944c536ecc4797bd944 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Aug 31 23:25:57 2008 +0900 |
| |
| sh: Replaced "@./mkconfig" for @$(MKCONFIG) |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Aug 28 14:50:52 2008 +0900 |
| |
| sh: Add support sh2 to MAKEALL |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6f3d8bb5faa12dbf3031382286784c978df038ee |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Aug 28 14:52:23 2008 +0900 |
| |
| sh: Fix compile error rsk7203 board |
| |
| This boards used old type preprocessor. |
| This patch fix compile error. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Aug 28 14:53:31 2008 +0900 |
| |
| sh: Fix compile error sh7785lcr board |
| |
| This boards used old type preprocessor. |
| This patch fix compile error. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6f0da4972e48f99d37bc522814940a6022cd3084 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Aug 22 17:39:09 2008 +0900 |
| |
| sh: Renesas Solutions AP325RXA board support |
| |
| AP325RXA is SH7723's reference board. |
| This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other. |
| In this patch, support SCIF, NOR Flash, and Ethernet. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit ab09f433b50bb83b5e440c335bc3839ee069e534 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Fri Aug 22 17:48:51 2008 +0900 |
| |
| sh: add support Renesas SH7723 |
| |
| Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other. |
| This patch supports CPU register's header file and SCIF serial driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c655fad06ba3fb042dbc667724a40e1a9a091248 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Aug 31 23:02:04 2008 +0900 |
| |
| sh: Renesas RSK+ 7203 board support |
| |
| This adds initial support for the RTE RSK+ SH7203 board. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Jul 3 23:11:02 2008 +0900 |
| |
| sh: Add support Renesas SH7203 processor |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Aug 31 22:48:33 2008 +0900 |
| |
| sh: Add support SH2/SH2A which is CPU of Renesas Technology |
| |
| Add support SH2/SH2A basic function. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 0d53a47dc0737b6aa3a39caee21410c169441ae5 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Aug 31 22:45:08 2008 +0900 |
| |
| sh: Renesas R0P7785LC0011RL board support |
| |
| This board has SH7785, 512MB DDR2-SDRAM, NOR Flash, |
| Graphic, Ethernet, USB, SD, RTC, and I2C controller. |
| |
| This patch supports the following functions: |
| - 128MB DDR2-SDRAM (29-bit address mode only) |
| - NOR Flash |
| - USB host |
| - Ethernet |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Thu Jul 10 19:32:53 2008 +0900 |
| |
| sh: add support for SH7785 |
| |
| Renesas SH7785 has DDR2-SDRAM controller, PCI, and other. |
| This patch supports CPU register's header file. |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit d6e04258be8f2408845468d3cf722a4cf0433445 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Aug 31 04:45:42 2008 +0200 |
| |
| davinci: fix remaining dm644x_eth |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Aug 31 04:24:56 2008 +0200 |
| |
| fs: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Aug 31 04:24:55 2008 +0200 |
| |
| devices: merge to list_head |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit ef0255fc75f28655f9681422079287d68a14dbaa |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Aug 31 04:24:51 2008 +0200 |
| |
| update linux/list |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Aug 31 00:39:48 2008 +0200 |
| |
| smdk6400: add gitignore |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Aug 31 00:39:48 2008 +0200 |
| |
| smdk6400: Use CONFIG_FLASH_CFI_DRIVER |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Sun Aug 31 00:39:47 2008 +0200 |
| |
| smdk6400: remove redundant bootargs definition |
| |
| Double bootargs setting leads to a duplicated environmant entry. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 11edcfe260f20dcea79284a3e95270989d433854 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Sun Aug 31 00:39:47 2008 +0200 |
| |
| ARM: Add support for S3C6400 based SMDK6400 board |
| |
| SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl |
| driver for it too. The board can also boot from the NOR flash, but due to |
| hardware limitations it can only address 64KiB on it, which is not enough |
| for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit e0056b341069796eaea11eae0fc8eb93a3dceaac |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Sun Aug 31 00:39:47 2008 +0200 |
| |
| NAND: add NAND driver for S3C64XX |
| |
| Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 3fe7b589f9c7463df39056f8872006a67f56a91c |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Sun Aug 31 00:39:47 2008 +0200 |
| |
| S3C64XX: remove broken HWFLOW support from the serial driver |
| |
| As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is |
| broken and currently unused. Remove it. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 2fb28dcf82048045e1bf5014e938e486fa6c2383 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Sun Aug 31 00:39:47 2008 +0200 |
| |
| serial: add S3C64XX serial driver |
| |
| Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 8262813ca04fc57f5d8856e1828085c136e0f1eb |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Sun Aug 31 00:39:46 2008 +0200 |
| |
| USB: Add support for OHCI controller on S3C6400 |
| |
| Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could |
| try to enable the MMU, but map addresses 1-to-1, and disable data cache, then |
| it should work too and we could still profit from instruction cache. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 9b07773f8883665b002500c190507e9fd99b7181 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Sun Aug 31 00:39:46 2008 +0200 |
| |
| ARM: Add arm1176 core with S3C6400 SoC |
| |
| Based on the original S3C64XX port by Samsung for U-Boot 1.1.6. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75 |
| Author: Sandeep Paulraj <s-paulraj@ti.com> |
| Date: Sun Aug 31 00:39:46 2008 +0200 |
| |
| ARM DaVinci: Changing function names for EMAC driver |
| |
| DM644x is just one of a series of DaVinci chips that use the EMAC driver. |
| By replacing all the function names that start with dm644x_* to davinci_* |
| we make these function more portable. I have tested this change on my EVM. |
| DM6467 is another DaVinci SOC which uses the EMAC driver and i will |
| be sending patches that add DaVinci DM6467 support to the list soon. |
| |
| Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> |
| |
| commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Sat Aug 30 23:21:30 2008 +0200 |
| |
| Integrator[AP/CP] - Remove unused file memsetup.S |
| |
| - memsetup.s is changed/merged to lowlevel_init.S |
| memsetup.S has a global label memsetup that just returns back to caller |
| - memsetup global label is changed/merged to lowlevel_init |
| This label is not called from anywhere. |
| |
| Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit 89d51d022a63be1a851eda983c8cbce1a044f65f |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Wed Aug 27 21:35:52 2008 +0200 |
| |
| ARM DaVinci: Standardize names of directories/files |
| |
| ARM DaVinci: Standardize names of directories/files. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 264bbdd11d01f14f5ea4629556ae63b00b13402d |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Fri Jul 11 15:10:13 2008 -0400 |
| |
| ARM DaVinci: Move common functions to board/davinci/common |
| |
| ARM DaVinci: Move common functions to board/davinci/common. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit c2b4b2e4814f4ace9015fdb64132894327400bf0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 29 11:56:49 2008 +0200 |
| |
| ppc4xx/NAND: Add select_chip function to 4xx NDFC driver |
| |
| This function is needed for the new NAND infrastructure. We only need |
| a dummy implementation though for the NDFC. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3d4a746e2fb4545f07d871049805fb34ae97cc94 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 29 12:06:27 2008 +0200 |
| |
| ppc4xx: Increase image size for NAND boot target |
| |
| This is needed since now with HUSH enabled (amcc-common.h) the image |
| read from NAND exceeds the previous limit. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Thu Aug 28 23:58:30 2008 -0700 |
| |
| Move MPC512x_FEC driver to drivers/net |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 80b00af01b3c9154774de2936f05a051e92f6a03 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Thu Aug 28 23:58:29 2008 -0700 |
| |
| Move MPC5xxx_FEC driver to drivers/net |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Aug 29 21:53:57 2008 +0200 |
| |
| cmd_terminal: remove no need ifdef |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 578118bdf122877ae769776be002255be447b4fa |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Aug 29 21:53:57 2008 +0200 |
| |
| common/Makefile: order by functionality |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Aug 29 21:53:56 2008 +0200 |
| |
| miiphyutil: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 81789c39db3f0f6b621df8c0ec66014d701f368e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Aug 29 21:53:37 2008 +0200 |
| |
| autoscript: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Aug 29 01:18:11 2008 +0200 |
| |
| crc16: move to lib_generic |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 55195773eacefb22dd483a3c560ea30a14263ce1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Aug 29 01:18:01 2008 +0200 |
| |
| miiphybb: move to drivers/net/phy |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e8314035996a9118ac5948df2ff8a2f2161ed67a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Aug 28 12:31:51 2008 +0200 |
| |
| soft_spi: move to drivers/spi |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Aug 28 12:31:51 2008 +0200 |
| |
| soft_i2c: move to drivers/i2c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 717a222229fdb77703e9174d0eb08a4b41febf49 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Aug 28 12:31:48 2008 +0200 |
| |
| gunzip: move to lib_generic |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 52aef8f9ba28b747973bf76741c23db658d5773c |
| Author: Wolfgang Ocker <weo@reccoware.de> |
| Date: Tue Aug 26 19:55:23 2008 +0200 |
| |
| ppc4xx: NAND configuration |
| |
| Made NAND bank configuration setting a config variable. |
| |
| Signed-off-by: Wolfgang Ocker <weo@reccoware.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5bc542a593abc9e974fbd34704af85c37c366c60 |
| Author: Victor Gallardo <vgallardo@amcc.com> |
| Date: Thu Aug 28 16:03:28 2008 -0700 |
| |
| ppc4xx: fix UIC external_interrupt hang on UIC0 |
| |
| This patch fixes a UIC external_interrupt hang if critical or non-critical |
| interrupt is set at the same time as a normal interrupt is set on UIC0. |
| |
| Signed-off-by: Victor Gallardo <vgallardo@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 04737d5ffd16248cb80ab3dd4f3765057a803f18 |
| Author: Prodyut Hazarika <phazarika@amcc.com> |
| Date: Wed Aug 27 16:39:00 2008 -0700 |
| |
| ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller |
| |
| Removed Magic numbers from Initialization preload registers |
| Tested with Kilauea, Glacier, Canyonlands and Katmai boards |
| About 5-7% improvement seen for LMBench memtests |
| |
| Signed-off-by: Prodyut Hazarika <phazarika@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8a490422bed685c9491274ec997f62061d88620b |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Thu Aug 28 13:17:07 2008 -0600 |
| |
| ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon |
| |
| MPC5121 rev 2 silicon has a new register for controlling how long |
| CS is asserted after deassertion of ALE in multiplexed mode. |
| |
| The default is to assert CS together with ALE. The alternative |
| is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE. |
| |
| The default is wrong for the NOR flash and CPLD on the ADS5121. |
| |
| This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD) |
| it does so conditionally based on silicon rev 2.0 or greater. |
| |
| Signed-off-by: Martha J Marx <mmarx@silicontkx.com> |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit 5d9a5efa4b332f442b54a755d49969123c3a8742 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Aug 19 00:56:46 2008 +0600 |
| |
| Add I2C frequency dividers for ColdFire |
| |
| The existing I2C freqency dividers for FDR does not apply |
| to ColdFire platforms; thus, a seperate table is added |
| based on MCF5xxx Reference Manual |
| |
| Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: Tabi Timur <timur@freescale.com> |
| |
| commit eec567a67e00d1ed8d941e9098b7d421f4091abf |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Aug 19 03:01:19 2008 +0600 |
| |
| ColdFire: I2C fix for multiple platforms |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit d53cf6a9c7423cba668b867978648645f71c3090 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Aug 19 00:37:13 2008 +0600 |
| |
| ColdFire: Add CONFIG_MII_INIT for M5272C3 |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f78ced3028d4130b24a318943a70cf5584ab16f4 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Aug 19 00:26:25 2008 +0600 |
| |
| ColdFire: Multiple fixes for MCF5445x platforms |
| |
| Add FEC pin set and mii reset in __mii_init(). Change |
| legacy flash vendor from 2 to AMD LEGACY (0xFFF0), |
| change cfi_offset to 0, and change CFG_FLASH_CFI to |
| CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and |
| M54455EVB env settings in configuration file. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Fri Aug 15 18:24:25 2008 +0000 |
| |
| ColdFire: Change the SDRAM BRD2WT timing from 3 to 7 |
| |
| The user manuals recommend 7. |
| |
| Signed-off-by: Kurt Mahan <kmahan@freescale.com> |
| Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 79e0799cf6e88d98d77b216a55234bf674b59a4e |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Fri Aug 15 16:50:07 2008 +0000 |
| |
| ColdFire: Raise uart baudrate to 115200 bps |
| |
| M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms |
| uart baudrate increase from 19200 to 115200 bps |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ab6ba842682552ccf071d0034da0a20633d1d1ac |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 13 12:07:03 2008 +0000 |
| |
| ColdFire: Fix board.c warning message |
| |
| Implicit declaration of nand_init() warning message |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Aug 27 01:10:34 2008 -0500 |
| |
| FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Aug 21 20:44:49 2008 +0200 |
| |
| mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 9cff4448a9cb882defe6c8bde73b77fc0c636799 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 19 14:46:36 2008 -0500 |
| |
| mpc85xx: remove redudant code with lib_ppc/interrupts.c |
| |
| For some reason we duplicated the majority of code in lib_ppc/interrupts.c |
| not show how that happened, but there is no good reason for it. |
| |
| Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why |
| they exist. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Jul 25 13:31:05 2008 -0500 |
| |
| mpc85xx: Add support for the MPC8536DS reference board |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> |
| Signed-off-by: Dejan Minic <minic@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 12 11:14:19 2008 -0500 |
| |
| mpc85xx: Add support for the MPC8536 |
| |
| The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We |
| also have SERDES init code for the 8536. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> |
| Signed-off-by: Dejan Minic <minic@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 12 11:13:08 2008 -0500 |
| |
| mpc85xx: Add support for the MPC8572DS reference board |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 457caecdbca3df21a93abff19eab12dbc61b7897 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Aug 27 01:05:35 2008 -0500 |
| |
| FSL DDR: Remove old SPD support from cpu/mpc85xx |
| |
| All 85xx boards have been converted to the new code so we can |
| remove the old SPD DDR setup code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0e7927db138976469e7257e29c1338050a50fcd9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Aug 27 01:04:07 2008 -0500 |
| |
| FSL DDR: Convert STXSSA to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c360d9b970fbb9c13744c355879671165bbb9b9e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Aug 27 01:03:42 2008 -0500 |
| |
| FSL DDR: Convert STXGP3 to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8e55313b7ae12352a343f9b9962e662dbd897187 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 23:52:58 2008 -0500 |
| |
| FSL DDR: Convert SBC8560 to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9658bec2e8f55d56ca1be70090ce5a348be4980f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 23:52:32 2008 -0500 |
| |
| FSL DDR: Convert MPC8540EVAL to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 6bfa8f723cfd82c55e3ef5620ade396916470a70 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 23:52:07 2008 -0500 |
| |
| FSL DDR: Convert PM856 to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d53bd3e17bd4f460257c19255569ea6dcfaae817 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 23:51:49 2008 -0500 |
| |
| FSL DDR: Convert PM854 to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 33b9079ba20926f14238fff863b68a98e938948e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 23:15:28 2008 -0500 |
| |
| FSL DDR: Convert sbc8548 to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 23:14:14 2008 -0500 |
| |
| FSL DDR: Convert atum8548 to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit be0bd8234b9777ecd63c4c686f72af070d886517 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 22:56:56 2008 -0500 |
| |
| FSL DDR: Convert socrates to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 08:02:30 2008 -0500 |
| |
| FSL DDR: Convert MPC8544DS to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Mar 18 13:51:05 2008 -0500 |
| |
| FSL DDR: Convert MPC8568MDS to new DDR code. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Mar 18 13:51:06 2008 -0500 |
| |
| FSL DDR: Convert MPC8548CDS to new DDR code. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit aa11d85cf318b961e029fe50d68ca47d004bce93 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Mar 17 15:48:18 2008 -0500 |
| |
| FSL DDR: Convert MPC8541CDS to new DDR code. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2b40edb10d81da7bba724edbccd7f53777112579 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Mar 18 11:12:42 2008 -0500 |
| |
| FSL DDR: Convert MPC8555ADS to new DDR code. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Mar 18 11:12:44 2008 -0500 |
| |
| FSL DDR: Convert MPC8560ADS to new DDR code. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Jun 6 13:12:18 2008 -0500 |
| |
| FSL DDR: Convert MPC8540ADS to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 21:34:55 2008 -0500 |
| |
| FSL DDR: Add 85xx specific register setting |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 6fb1b7346849ccd0c20306143e334f5b76143070 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jun 9 11:07:46 2008 -0500 |
| |
| FSL DDR: Add e500 TLB helper for DDR code |
| |
| Provide a helper function that board code can call to map TLBs when |
| setting up DDR. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d26b739afe5a6760bd345743188759cd9d0f3b47 |
| Author: Andrew Dyer <adyer@righthandtech.com> |
| Date: Tue Aug 26 17:03:38 2008 -0500 |
| |
| dm9000 remove dead external phy support, gpio fix |
| |
| dm9000 has code to detect and initialize external phy parts, but later |
| on in the code the part is forced to use the internal phy |
| unconditionally. Remove the unused/untested code. |
| |
| change the GPIO initialization so that only the GPIO used as an |
| internal phy reset (hardwired in the chip) is set as an output. The |
| remaining GPIO need to be handled by board specific code to prevent |
| possible drive conflicts. Set as inputs for safety. |
| |
| replace a few magic numbers with defines |
| |
| Signed-off-by: Andrew Dyer <adyer@righthandtech.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Aug 26 11:17:48 2008 -0500 |
| |
| Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions |
| |
| cmd_net.c command descriptions were updated to describe the optional |
| hostIPaddr argument. The dhcp command help message was also updated |
| to more closely reflect the other commands in cmd_net.c |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 51dfe1382ebaf691485badfa0ea5e75b0710531b |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Wed Aug 20 11:30:28 2008 +0200 |
| |
| Fix bogus error message in the DHCP handler |
| |
| The DHCP handler has 1 state that is not listed in this case, causing a |
| failure message when there is actually no failure. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Wed Aug 20 11:30:27 2008 +0200 |
| |
| Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set. |
| |
| The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a |
| missing extern inside the net/bootp.h header |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 1803f7f91ff35ca402259065df7557107dcf28a2 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Aug 19 21:26:32 2008 +0000 |
| |
| ColdFire: Add FEC Buffer descriptors in SRAM |
| |
| Add FEC Buffer descriptors and data buffer in SRAM for |
| faster execution and access. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 429be27ce195210d4b9decf9e867b9ca6155a87d |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 21 23:55:11 2008 +0000 |
| |
| Fix ColdFire FEC warning messages |
| |
| Types mismatch and implicit declaration of icache_invalid() |
| warning messages |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 6a002171098e968bd5b362347d2831224fab6048 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sat Jul 12 00:17:50 2008 -0700 |
| |
| Moved initialization of SKGE Ethernet driver to board code. |
| |
| The only board using this driver is the SL8245 board. |
| Removed initialization for the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sat Jul 12 00:08:45 2008 -0700 |
| |
| Moved conditional compilation to Makefile for SK98 Ethernet driver |
| |
| Brute-force removal of #ifdefs. Didn't touch the code. |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 65d3d99c28dc363d15eaee78225ff643df499b97 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Fri Jul 11 23:42:19 2008 -0700 |
| |
| Moved initialization of ULI526X Ethernet driver to board code. |
| |
| The only board using this driver is the Freescale MPC8610HPCD board. |
| Removed initialization for the driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Fri Jul 11 23:15:28 2008 -0700 |
| |
| Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init() |
| |
| Added board_eth_init() function to bf537-stamp board. |
| Removed initialization for the Blackin EMAC driver from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit fc363ce35408f348cacced68505f3747a53e3d7c |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Jul 9 01:04:19 2008 -0700 |
| |
| Moved initialization of GRETH Ethernet driver to CPU directory |
| |
| Added a cpu_eth_init() function to leon2/leon3 CPU directories and |
| removed code from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 86882b80771309bceb11c6accfd7f6f90ade8bfc |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Tue Aug 26 22:16:25 2008 -0700 |
| |
| Moved initialization of MCFFEC Ethernet driver to CPU directory |
| |
| Added a cpu_eth_init() function to coldfire CPU directories and |
| removed code from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit b31da88b9c160d80d42a59cbbb31e24f27184d5c |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Tue Aug 26 22:12:36 2008 -0700 |
| |
| Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory |
| |
| Added a cpu_eth_init() function to cpu/mcf547x_8x directory and |
| removed code from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 15:01:38 2008 -0500 |
| |
| FSL DDR: Remove old SPD support from cpu/mpc86xx |
| |
| All 86xx boards have been converted to the new code so we can |
| remove the old SPD DDR setup code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9bd4e5911b750837515466bc7449087698b88e0e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 15:01:37 2008 -0500 |
| |
| FSL DDR: Convert SBC8641D to new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 26 15:01:36 2008 -0500 |
| |
| FSL DDR: Convert MPC8610HPCD to new DDR code. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 15:01:35 2008 -0500 |
| |
| FSL DDR: Convert MPC8641HPCN to new DDR code. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 15:01:34 2008 -0500 |
| |
| FSL DDR: Add 86xx specific register setting |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 233fdd502a6c227f476212b3097653ad48d7e254 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 15:01:32 2008 -0500 |
| |
| FSL DDR: Add DDR2 DIMM paramter support |
| |
| Compute DIMM parameters based upon the SPD information. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 05c05a2363a6ac11e0e405926034546ffad71fad |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 15:01:30 2008 -0500 |
| |
| FSL DDR: Add DDR1 DIMM paramter support |
| |
| Compute DIMM parameters based upon the SPD information in spd. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 15:01:29 2008 -0500 |
| |
| FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code. |
| |
| The main purpose of this rewrite it to be able to share the same |
| initialization code on all FSL PowerPC products that have DDR |
| controllers. (83xx, 85xx, 86xx). |
| |
| The code is broken up into the following steps: |
| GET_SPD |
| COMPUTE_DIMM_PARMS |
| COMPUTE_COMMON_PARMS |
| GATHER_OPTS |
| ASSIGN_ADDRESSES |
| COMPUTE_REGS |
| PROGRAM_REGS |
| |
| This allows us to share more code an easily allow for board specific code |
| overrides. |
| |
| Additionally this code base adds support for >4G of DDR and provides a |
| foundation for supporting interleaving on processors with more than one |
| controller. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f784e32b4bce0013983506b11af4b85b8ca3d36e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 26 15:01:28 2008 -0500 |
| |
| FSL DDR: Provide a generic set_ddr_laws() |
| |
| Provide a helper function that will setup the last available |
| LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Tue Aug 26 15:01:27 2008 -0500 |
| |
| Add proper SPD definitions for DDR1/2/3 |
| |
| Also adds helper functions for DDR1/2 to verify the checksum. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 285db74716c724ae8a0ff177878fd09a74428c7b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 27 01:02:48 2008 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Tue Aug 19 10:08:49 2008 +0200 |
| |
| Add support for muas3001 board (MPC8270) |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 322098bff32410d2a00031649b47c4ec90a66d9a |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Tue Aug 19 08:31:18 2008 +0530 |
| |
| common/cmd_load.c cleanup - remove unused variables |
| |
| - Remove unused global variable os_data_count. |
| - Remove unused variable z. |
| |
| Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit 306620b762a4f9fa6678568ad2e8772dec145208 |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Mon Aug 18 13:35:27 2008 +0200 |
| |
| remove MVS1 board |
| |
| MVS1 board has reached end-of-life and can be removed completely. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| |
| commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:45 2008 -0500 |
| |
| bootm: refactor do_reset and os boot function args |
| |
| There is no need for each OS specific function to call do_reset() we |
| can just do it once in bootm. This means its feasible on an error for |
| the OS boot function to return. |
| |
| Also, remove passing in cmd_tbl_t as its not needed by the OS boot |
| functions. flag isn't currently used but might be in the future so |
| we left it alone. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 40afac22a9c602e55c501c800f1c064324711b56 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:44 2008 -0500 |
| |
| fdt: Added resize command |
| |
| Resize the fdt to size + padding to 4k boundary |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:43 2008 -0500 |
| |
| fdt: refactor initrd related code |
| |
| Created a new fdt_initrd() to deal with setting the initrd properties |
| in the device tree and fixing up the mem reserve. We can use this |
| both in the choosen node handling and lets us remove some duplicated |
| code when we fixup the initrd info in bootm on PPC. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:42 2008 -0500 |
| |
| fdt: refactor fdt resize code |
| |
| Move the fdt resizing code out of ppc specific boot code and into |
| common fdt support code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 396f635b8ff3ccbc38d75d5eda98444c6466810a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:41 2008 -0500 |
| |
| bootm: refactor image detection and os load steps |
| |
| Created a bootm_start() that handles the parsing and detection of all |
| the images that will be used by the bootm command (OS, ramdisk, fdt). |
| As part of this we now tract all the relevant image offsets in the |
| bootm_headers_t struct. This will allow us to have all the needed |
| state for future sub-commands and lets us reduce a bit of arch |
| specific code on SPARC. |
| |
| Created a bootm_load_os() that deals with decompression and loading |
| the OS image. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:40 2008 -0500 |
| |
| bootm: move lmb into the bootm_headers_t structure |
| |
| To allow for persistent state between future bootm subcommands we |
| need the lmb to exist in a global state. |
| Moving it into the bootm_headers_t allows us to do that. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 54f9c86691309b2f919f567f9255b8bcad2c7651 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:39 2008 -0500 |
| |
| bootm: Set working fdt address as part of the bootm flow |
| |
| Set the fdt working address so "fdt FOO" commands can be used as part |
| of the bootm flow. Also set an the environment variable "fdtaddr" |
| with the value. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 06a09918f3903450313e2047a9cc258bf5872f46 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:38 2008 -0500 |
| |
| bootm: refactor fdt locating and relocation code |
| |
| Move the code that handles finding a device tree blob and relocating |
| it (if needed) into common code so all arch's have access to it. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:37 2008 -0500 |
| |
| bootm: refactor ramdisk locating code |
| |
| Move determing if we have a ramdisk and where its located into the |
| common code. Keep track of the ramdisk start and end in the |
| bootm_headers_t image struct. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c160a9544743e80e8889edb2275538e7764ce334 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:36 2008 -0500 |
| |
| bootm: refactor entry point code |
| |
| Move entry point code out of each arch and into common code. |
| Keep the entry point in the bootm_headers_t images struct. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 20220d22b9f41446288588cd2e457e0077a18bed |
| Author: Randy Vinson <rvinson@mvista.com> |
| Date: Wed Aug 13 11:44:57 2008 -0700 |
| |
| mpc7448hpc2: Fix PCI I/O space mapping. |
| |
| PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires |
| PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O |
| space such that 0xFA000000 in the processor's address space maps to 0 |
| on the PCI I/O bus. |
| |
| Signed-off-by Randy Vinson <rvinson@mvista.com> |
| Acked-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Wed Aug 13 18:10:26 2008 +0200 |
| |
| i.MX31: Specify maintainers for i.MX31-based boards |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 26 15:01:28 2008 +0200 |
| |
| ADS5121: adjust image addresses in RAM and flash |
| |
| Use the same mapping in flash as used by Linux |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 19f101412c16edee9fd55db4039e1d68a833b28b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 26 13:14:34 2008 +0200 |
| |
| cmd_mem.c: Fix help message alignment |
| |
| Bug was introced by "Big white-space cleanup" (53677ef1) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Wed Aug 20 11:11:52 2008 +0200 |
| |
| change mvBL-M7 default env and move to vendor subdir |
| |
| fix mvBL-M7 config and move to matrix_vision subdir |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5 |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Fri Aug 22 23:52:40 2008 -0700 |
| |
| MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices |
| |
| This patch adds elements to the 83xx sysconf structure and #define values that are used |
| by mpc83xx family devices. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 447ad5768abda669ac0e7f46fcdb62fbe828d637 |
| Author: Ira W. Snyder <iws@ovro.caltech.edu> |
| Date: Fri Aug 22 11:00:15 2008 -0700 |
| |
| MPC8349EMDS: Add PCI Agent (PCISLAVE) support |
| |
| Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a |
| PCI card rather than a host computer. |
| |
| Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 4ff9aea9d6b5602683a920951ef896996438af62 |
| Author: Ira W. Snyder <iws@ovro.caltech.edu> |
| Date: Fri Aug 22 11:00:14 2008 -0700 |
| |
| mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code |
| |
| This adds a helper function to unlock the PCI configuration bit, so that |
| any extra PCI setup (such as outbound windows, etc.) can be done after |
| using the 83XX_GENERIC_PCI code to set up the PCI bus. |
| |
| Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 162338e1fcde231ca4d562e5ebd7859456731691 |
| Author: Ira W. Snyder <iws@ovro.caltech.edu> |
| Date: Fri Aug 22 11:00:13 2008 -0700 |
| |
| MPC8349EMDS: use 83XX_GENERIC_PCI setup code |
| |
| Change the MPC8349EMDS board to use the generic PCI initialization code |
| for the mpc83xx cpu. |
| |
| Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f4e55a4941e8ba46bc06020b2747928adf8fdee7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Aug 25 14:53:09 2008 -0500 |
| |
| fix out of tree building |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a49d10cf027d059ee15c262010a05cdaec0961e1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 25 23:45:41 2008 +0200 |
| |
| Minor coding style cleanup, updte CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4d56e8dea670757c801a6a65531f02a8f981ce1f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 20 20:29:38 2008 +0200 |
| |
| RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338) |
| |
| This "||" doesn't seem to work. Now using the idea suggest by Scott Wood |
| to combine both config options into one line. This even allows defining |
| both options and not generating the target object twice. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 079edb913dbae147b50a488cf02e03f473fc5f28 |
| Author: Jens Gehrlein <sew_s@tqs.de> |
| Date: Fri Jul 4 16:50:05 2008 +0200 |
| |
| MX31: fix bit masks in function mx31_decode_pll() |
| |
| Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered. |
| |
| Signed-off-by: Jens Gehrlein <sew_s@tqs.de> |
| |
| commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6 |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Mon Aug 25 11:11:34 2008 +0200 |
| |
| Correct ARM Versatile Timer Initialization |
| |
| - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271), |
| -- Timer Value Register @ TIMER Base + 4 is Read-only. |
| -- Prescale Value (Bits 3-2 of TIMER Control register) |
| can only be one of 00,01,10. 11 is undefined. |
| -- CFG_HZ for Versatile board is set to |
| #define CFG_HZ (1000000 / 256) |
| So Prescale bits is set to indicate |
| - 8 Stages of Prescale, Clock divided by 256 |
| - The Timer Control Register has one Undefined/Shouldn't Use Bit |
| So we should do read/modify/write Operation |
| |
| Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9 |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Mon Aug 25 11:30:29 2008 +0200 |
| |
| Add ARM AMBA PL031 RTC Support |
| |
| Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| |
| commit e39411674669cc880e1ec4a8ca4794fb15c33a45 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Tue Aug 19 16:21:03 2008 -0400 |
| |
| ARM DaVinci: Removed redundant NAND initialization code. |
| |
| ARM DaVinci: Removed redundant NAND initialization code. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit b3fb663b20d995ca41327db877ddb168279b3f62 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Tue Aug 19 16:21:00 2008 -0400 |
| |
| ARM DaVinci: Fix compilation error with new MTD code. |
| |
| ARM DaVinci: Fix compilation error with new MTD code. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Aug 22 14:37:05 2008 -0400 |
| |
| Add note on dereferencing /aliases pointers |
| |
| Replace the "must quote special characters" note with a hint on |
| how to dereference /aliases pointers by omitting the leading "/". |
| This feature was introduced by Kumar Gala as a libfdt enhancement |
| in commit ed035708235332c3c117ee3bb1a426063f03cfcb. |
| |
| Example: |
| |
| => fdt print /aliases |
| aliases { |
| ethernet0 = "/qe@e0100000/ucc@2000"; |
| ethernet1 = "/qe@e0100000/ucc@3000"; |
| serial0 = "/soc8360@e0000000/serial@4500"; |
| serial1 = "/soc8360@e0000000/serial@4600"; |
| pci0 = "/pci@e0008500"; |
| }; |
| => fdt print ethernet0 |
| ucc@2000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <0x1>; |
| reg = <0x2000 0x200>; |
| interrupts = <0x20>; |
| interrupt-parent = <0x2>; |
| local-mac-address = [00 00 00 00 00 00]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk9"; |
| phy-handle = <0x3>; |
| phy-connection-type = "rgmii-id"; |
| pio-handle = <0x4>; |
| }; |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit feeca3f578b7f53c032ba203698751c982f8bf5a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 14 08:28:19 2008 -0500 |
| |
| libfdt: Add support for using aliases in fdt_path_offset() |
| |
| If the path doesn't start with '/' check to see if it matches some alias |
| under "/aliases" and substitute the matching alias value in the path |
| and retry the lookup. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: David Gibson <david@gibson.dropbear.id.au> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Wed Aug 6 14:50:49 2008 +1000 |
| |
| libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen() |
| |
| As well as fdt_subnode_offset(), libfdt includes an |
| fdt_subnode_offset_namelen() function that takes the subnode name to |
| look up not as a NUL-terminated string, but as a string with an |
| explicit length. This can be useful when the caller has the name as |
| part of a longer string, such as a full path. |
| |
| However, we don't have corresponding 'namelen' versions for |
| fdt_get_property() and fdt_getprop(). There are less obvious use |
| cases for these variants on property names, but there are |
| circumstances where they can be useful e.g. looking up property names |
| which need to be parsed from a longer string buffer such as user input |
| or a configuration file, or looking up an alias in a path with |
| IEEE1275 style aliases. |
| |
| So, since it's very easy to implement such variants, this patch does |
| so. The original NUL-terminated variants are, of course, implemented |
| in terms of the namelen versions. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit f171746f701ea58bf6a53e835b53d2aaebee0d81 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Tue Jul 29 14:51:22 2008 +1000 |
| |
| libfdt: Forgot one function when cleaning the namespace |
| |
| In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all |
| libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the |
| chance of collisions with things from whatever package libfdt is |
| embedded in, pulled into the libfdt build via that environment's |
| libfdt_env.h. |
| |
| Except... I missed one. This patch applies the same treatment to |
| _stringlist_contains(). While we're at it, also make it static since |
| it's only used in the same file. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 46390da15411351fc3b498bd8c1615f78fe80df0 |
| Author: Wolfram Sang <w.sang@pengutronix.de> |
| Date: Wed Jul 9 11:22:44 2008 +0200 |
| |
| libfdt: Improve documentation in libfdt.h |
| |
| Fix a few typos and mistakes. |
| |
| Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> |
| Acked-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Wed Jul 9 14:10:24 2008 +1000 |
| |
| libfdt: Increase namespace-pollution paranoia |
| |
| libfdt is supposed to easy to embed in projects all and sundry. |
| Often, it won't be practical to separate the embedded libfdt's |
| namespace from that of the surrounding project. Which means there can |
| be namespace conflicts between even libfdt's internal/static functions |
| and functions or macros coming from the surrounding project's headers |
| via libfdt_env.h. |
| |
| This patch, therefore, renames a bunch of libfdt internal functions |
| and macros and makes a few other chances to reduce the chances of |
| namespace collisions with embedding projects. Specifically: |
| - Internal functions (even static ones) are now named _fdt_*() |
| |
| - The type and (static) global for the error table in |
| fdt_strerror() gain an fdt_ prefix |
| |
| - The unused macro PALIGN is removed |
| |
| - The memeq and streq macros are removed and open-coded in the |
| users (they were only used once each) |
| |
| - Other macros gain an FDT_ prefix |
| |
| - To save some of the bulk from the previous change, an |
| FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) == |
| FDT_ALIGN(x, FDT_TAGSIZE) |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit c66830263af19831f2b7db307f79d1943febf7f9 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Jul 7 10:14:15 2008 +1000 |
| |
| dtc: Enable and fix -Wcast-qual warnings |
| |
| Enabling -Wcast-qual warnings in dtc shows up a number of places where |
| we are incorrectly discarding a const qualification. There are also |
| some places where we are intentionally discarding the 'const', and we |
| need an ugly cast through uintptr_t to suppress the warning. However, |
| most of these are pretty well isolated with the *_w() functions. So |
| in the interests of maximum safety with const qualifications, this |
| patch enables the warnings and fixes the existing complaints. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Jul 7 10:10:48 2008 +1000 |
| |
| dtc: Enable and fix -Wpointer-arith warnings |
| |
| This patch turns on the -Wpointer-arith option in the dtc Makefile, |
| and fixes the resulting warnings due to using (void *) in pointer |
| arithmetic. While convenient, pointer arithmetic on void * is not |
| portable, so it's better that we avoid it, particularly in libfdt. |
| |
| Also add necessary definition of uintptr_t needed by David Gibson's |
| changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition |
| comes from stdint.h, which u-boot doesn't have). -- gvb |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd |
| Author: Tirumala R Marri <tmarri@amcc.com> |
| Date: Thu Aug 21 21:54:53 2008 -0700 |
| |
| ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix |
| |
| During recent PCI-E tests it has been found that current |
| driverl level and de-emphasis values are not set correctly. |
| After sweeping throgh all de-ephasis values, it was found that |
| 0x130 is a right value. Where 0x13 is driver level and 0 is |
| de-emphasis. |
| |
| Signed-off-by: Tirumala R Marri <tmarri@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Wed Aug 20 20:46:56 2008 +0200 |
| |
| Make the YAFFS filesystem work |
| |
| Recently the YAFFS filesystem support has been added to U-boot. |
| However, just enabling CONFIG_YAFFS2 is not enough to get it working. |
| |
| ymount will generate an exception (when dereferencing mtd->readoob()), because |
| the genericDevice is a null pointer. Further, a lot of logging is produced |
| while using YAFFS fs, so logging should also be disabled. |
| Both issues are solved by this patch. |
| |
| With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem |
| in U-boot, as well as in Linux. |
| |
| Tested on a Atmel AT91SAM9261EK board. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Acked-by: William Juul <william.juul@tandberg.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Tue Aug 19 08:42:53 2008 +0900 |
| |
| Fix OneNAND read_oob/write_oob functions compatability |
| |
| Also sync with kernel OneNAND codes |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 8d765456c1d33f2010d2717ee58de7647fdc6346 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Aug 18 17:11:20 2008 -0500 |
| |
| NAND: Remove delay from nand_boot_fsl_elbc.c. |
| |
| It was for debugging purposes, and shouldn't have been left in. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit f556483734126793522fb7a8cf36af90da78f084 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 21 11:05:03 2008 +0200 |
| |
| ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch |
| |
| This patch fixes some minor issues introduced with the patch: |
| ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika: |
| |
| - Rework memory-queue and PLB arbiter optimization code, that the |
| local variable is not needed anymore. This removes one #ifdef. |
| - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead |
| of XXX+ 0x01). This was not introduced by Prodyut, just a |
| copy-paste problem. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 079589bcfb24ba11068460276a3cc9549ab5346f |
| Author: Prodyut Hazarika <phazarika@amcc.com> |
| Date: Wed Aug 20 09:38:51 2008 -0700 |
| |
| ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe, |
| PPC405EX and PPC460EX/GT/SX |
| |
| - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX |
| processors |
| - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared |
| across processors (405 and 440/460) |
| - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX |
| processors |
| - Add register bit definitions for Memory Queue Configuration registers |
| |
| Signed-off-by: Prodyut Hazarika <phazarika@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ba37aa03287c5483c61c0a3e320c8888bee0143a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 19 15:41:18 2008 -0500 |
| |
| fdt: rework fdt_fixup_ethernet() to use env instead of bd_t |
| |
| Move to using the environment variables 'ethaddr', 'eth1addr', etc.. |
| instead of bd->bi_enetaddr, bi_enet1addr, etc. |
| |
| This makes the code a bit more flexible to the number of ethernet |
| interfaces. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4cacf7c64609839f809e2f9c45873f1d65861703 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 19 14:57:55 2008 +0200 |
| |
| hush: Fix printf debug macro in hush.c so that it usable in U-Boot |
| |
| This patch changes the debug_printf() marco for U-Boot in hush.c and |
| moves the definition of DEBUG_SHELL to a place that is actually compiled |
| under U-Boot. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Tue Aug 19 09:57:41 2008 +0200 |
| |
| cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER |
| |
| Commit 00b1883a4cac59d97cd297b1a3a398db85982865 |
| missed a few boards: |
| include/configs/M5253DEMO.h |
| include/configs/ml507.h |
| include/configs/redwood.h |
| |
| This patch fixes this. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 0768b7a872964085eece8d5e9fec9175e9deb161 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon Aug 18 13:41:27 2008 +0200 |
| |
| Consolidate strmhz() implementation |
| |
| ARM, i386, m68k and ppc all have identical implementations of strmhz(). |
| Other architectures don't provide this function at all. |
| |
| This patch moves strmhz() into lib_generic, reducing code duplication |
| and providing a more unified API across architectures. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit a928d0df211f1d829308d335d19be3ca42558dfc |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Mon Aug 18 12:02:51 2008 +0200 |
| |
| fix mvbc_p board build warnings |
| |
| fix build warnings @ mvBC-P board by using correct types, i.e. change |
| out_be32 to out_be16 and out_8 accordingly. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| |
| commit a958b663d27f616bd1dfb720d1b476d1ecaaa569 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 16 18:54:27 2008 +0200 |
| |
| Makefile: fix posix support on find |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit bef92e215d945cc574399c1a1b00a3a76d35aa03 |
| Author: Axel Beierlein <belatronix@web.de> |
| Date: Sat Aug 16 00:30:48 2008 +0200 |
| |
| Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards |
| |
| Tested with TQM5200S on STK52XX.200 Board |
| |
| Signed-off-by: Axel Beierlein <belatronix@web.de> |
| |
| commit 0800707b6d5041a840a65d556032c15c584b55f8 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Fri Aug 15 14:36:32 2008 -0500 |
| |
| mod_i2c_mem() bugfix |
| |
| The last used chip, address, and address length were not being |
| stored for the imm and imn commands. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 4afbef967275b2f636abae86f91b81becee7ad03 |
| Author: Steven A. Falco <sfalco@harris.com> |
| Date: Fri Aug 15 15:37:31 2008 -0400 |
| |
| Fix typo in spelling of ATAPI. |
| |
| Correct a small spelling mistake. |
| |
| Signed-off-by: Steven A. Falco <sfalco@harris.com> |
| |
| commit 36c2d3062ecc6ab85f8e237180eb134464c48418 |
| Author: Steven A. Falco <sfalco@harris.com> |
| Date: Fri Aug 15 15:34:10 2008 -0400 |
| |
| Add a hook to allow board-specific PIO mode setting. |
| |
| This patch adds a hook whereby a board-specific routine can be called to |
| configure hardware for a PIO mode. The prototype for the board-specific |
| routine is: |
| |
| int inline ide_set_piomode(int pio_mode) |
| |
| ide_set_piomode should be prepared to configure hardware for a pio_mode |
| between 0 and 6, inclusive. It should return 0 on success or 1 on failure. |
| |
| Signed-off-by: Steven A. Falco <sfalco@harris.com> |
| |
| commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4 |
| Author: Steven A. Falco <sfalco@harris.com> |
| Date: Fri Aug 15 15:29:12 2008 -0400 |
| |
| Replace enums in ata.h with an include of libata.h |
| |
| This patch removes some enums from ata.h and replaces them with an |
| include of libata.h. This way, we eliminate duplicated code, and |
| prevent errors whereby the different versions could be out of sync. |
| |
| Signed-off-by: Steven A. Falco <sfalco@harris.com> |
| |
| commit 0de0afbca865ecf482b4d2b635236746def8518f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Aug 15 18:32:41 2008 +0200 |
| |
| coldfire: fix CFI drivers activation with new macro |
| |
| rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:35 2008 -0500 |
| |
| fdt: fdt addr w/o any args reports back the current working address |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f953d99fd528a496b400a706b511eaf8e3ea66af |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:34 2008 -0500 |
| |
| fdt: added the ability to set initrd start/end via chosen command |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ffa4bafacaef67058463b3d7d0099ced57569dd2 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:33 2008 -0500 |
| |
| Add command to enable/disable interrupts |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Tue Aug 19 22:21:16 2008 -0700 |
| |
| CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect() |
| |
| This patch fixes a missing vendor code in the flash_real_protect() function. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Aug 19 16:53:39 2008 +0000 |
| |
| CFI: Fix AMD Legacy sector protect |
| |
| New implement sector lock and unlock or softlock commands |
| do not exist in AMD legacy flash. Thus, causing issue |
| when erasing AMD legacy flash (such as lv040) |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 492671404140f09d5b21b3d2ce4e362c0692c069 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Aug 20 09:40:16 2008 +0200 |
| |
| hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER |
| |
| CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 33eac2b3d946fc998a09245dfe54d017079b9056 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Aug 20 09:28:36 2008 +0200 |
| |
| hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 25da0b84195fdda89a943b2d25757db5afeef5b8 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Aug 20 09:27:37 2008 +0200 |
| |
| favr-32-ezkit: Fix printf format warnings |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri Aug 15 12:04:25 2008 +0200 |
| |
| MAINTAINERS: Sort avr32 section alphabetically |
| |
| The rest of the MAINTAINERS file appears to be sorted |
| almost-alphabetically, but entries for the newly added AVR32 boards were |
| added somewhat randomly. This patch sorts the list alphabetically again. |
| |
| Also update my e-mail address. The old one still works, but it may not |
| work forever. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 13b50fe3bc065c48911fa373231421280855a9d6 |
| Author: Mark Jackson <mpfj@mimc.co.uk> |
| Date: Wed Jul 30 13:07:27 2008 +0100 |
| |
| avr32: Add MIMC200 board |
| |
| The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra |
| 8MByte FLASH and 128KByte FRAM. |
| |
| Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Wed Jul 9 21:07:34 2008 +0900 |
| |
| rtl8169: add support for RTL8110SCL |
| |
| This patch fixes a problem that RTL8110SCL started transfer |
| with an incorrect memory address. |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 943b825bf15e6a28ac8328e0f6489478bceef1ea |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jun 25 15:48:52 2008 -0500 |
| |
| Fix dm9000 receive status and len little endian issue |
| |
| The received status and len was in little endian |
| format and caused the ethernet unable to proceed |
| further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit(). |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit fcd69a1a57fb2af4d26201422095a4be9f36963e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:32 2008 -0500 |
| |
| Clean up usage of icache_disable/dcache_disable |
| |
| There is no point in disabling the icache on 7xx/74xx/86xx parts and not |
| also flushing the icache. All callers of invalidate_l1_instruction_cache() |
| call icache_disable() right after. Make it so icache_disable() calls |
| invalidate_l1_instruction_cache() for us. |
| |
| Also, dcache_disable() already calls dcache_flush() so there is no point |
| in the explicit calls of dcache_flush(). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Aug 15 08:24:31 2008 -0500 |
| |
| Update linux bootm to support ePAPR client interface |
| |
| The ePAPR spec has some subtle differences from the current device |
| tree based boot interface to the powerpc linux kernel. The powerpc |
| linux kernel currently ignores the differences that ePAPR specifies. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b734e5556a239b3be5f9693b2f4b4b739683ec16 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 18 23:50:20 2008 +0200 |
| |
| Minor code cleanup: keep lists sorted. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d0039d4ed275e6ca09fb417895024ad02be118c4 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Wed Jul 23 19:10:14 2008 +0200 |
| |
| Add support for ADT7460 I2C monitor chip |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| |
| commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Jul 14 19:45:45 2008 +0200 |
| |
| video: Clean drivers/video/Makefile |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 871c18dd301752270e1f74328c846c3104be1e2e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Jul 14 19:45:37 2008 +0200 |
| |
| rtc: Clean drivers/rtc/Makefile |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Jul 14 19:45:35 2008 +0200 |
| |
| i2c: Clean drivers/i2c/ Makefile |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Jul 9 22:30:30 2008 +0800 |
| |
| Add 'license' command to U-Boot command line |
| |
| The 'license' command includes the U-Boot license (GPLv2) into the |
| actual bootloader binary. The license text can be shown interactively |
| at the U-Boot commandline. |
| |
| For products where the commandline can actually be accessed by the |
| end user, this helps to prevent inadvertent GPL violations, since the |
| GPLv2 license text can no longer be 'forgotten' to be included into |
| the product. |
| |
| The 'license' command can be enabled by CONFIG_CMD_LICENSE. |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit fe2ce5500ebf43d79d227190bd2370232d5b113d |
| Author: Harald Welte <laforge@gnumonks.org> |
| Date: Sun Jul 6 15:56:38 2008 +0800 |
| |
| add 'unzip' command to u-boot commandline |
| |
| [PATCH] add new 'unzip' command to u-boot commandline |
| |
| common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from |
| memory to memory, and option CONFIG_CMD_UNZIP to enable it |
| |
| Signed-off-by: Werner Almesberger <werner@openmoko.org> |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit 07efc9e321619c3dec213310c32e011aa6f02783 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 6 19:37:17 2008 -0500 |
| |
| Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase |
| |
| The CFG_ENV_SIZE is not suitable used for SPI flash erase |
| sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE. |
| Add condition check if CFG_ENV_SIZE is larger than |
| CFG_ENV_SECT_SIZE, calculate the right number of sectors for |
| erasing. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Aug 11 15:54:25 2008 +0000 |
| |
| ColdFire: Multiple fixes for M5282EVB |
| |
| Incorrect CFG_HZ value, change 1000000 to 1000. |
| Rename #waring to #warning. RAMBAR1 uses twice |
| in start.S, rename the later to FLASHBAR. Insert |
| nop for DRAM setup. And, env_offset in linker file. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 10db3a17a278dd3a27668b31cb32cdd1476e9513 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Aug 11 15:26:43 2008 +0000 |
| |
| ColdFire: Move m5282evb from board to board/freescale |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Aug 11 15:25:07 2008 +0000 |
| |
| ColdFire: Move m5272c3 from board to board/freescale |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 659e9bad629a480f606b286d5703aef7159edf98 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Aug 11 15:23:16 2008 +0000 |
| |
| ColdFire: Move m5271evb from board to board/freescale |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 05316f8ece8206339a208ec052f039cd0f7ca922 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Aug 11 13:41:49 2008 +0000 |
| |
| ColdFire: Add M54451EVB platform support for MCF5445x |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 6 19:14:08 2008 -0500 |
| |
| ColdFire: Add Serial Flash support for M54455EVB |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 9f751551456828b2d0ff417f10959fb0c7110bd0 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 23 20:38:53 2008 -0500 |
| |
| ColdFire: Implement SBF feature for M5445EVB |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a7323bba229203aae2604afde131ab47bad4eadc |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 23 17:53:36 2008 -0500 |
| |
| ColdFire: Add SSPI feature for MCF5445x |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b2d022d1ac3f59bffa9cec249341e77aea168abc |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 23 17:37:10 2008 -0500 |
| |
| ColdFire: Use CFI Flash driver for M54455EVB |
| |
| Remove non-common flash driver in |
| board/freescale/m54455evb/flash.c. The non-cfi flash will |
| use CONFIG_FLASH_CFI_LEGACY to configure the flash |
| attribute. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 23 17:11:47 2008 -0500 |
| |
| ColdFire: Add M5253DEMO platform support for MCF5253 |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 80ba61fd82569af40e04d4a089257b81881884f2 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 6 14:17:09 2008 -0500 |
| |
| ColdFire: Raise M5253EVBE uart baudrate to 115200 bps |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit d361307e73ce1f6fc68760123f37d4876f851f3e |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 6 14:11:36 2008 -0500 |
| |
| ColdFire: Fix M5253EVB dram bring up issue |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 4b0708093e15b412296328bf81325cf9b69fe512 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 14 14:41:06 2008 +0200 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 68cf19aae48f2969ec70669604d0d776f02c8bc4 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Aug 13 18:24:05 2008 -0500 |
| |
| socrates: Update NAND driver to new API. |
| |
| Also, fix some minor formatting issues, and simplify the handling of |
| "state" for writes. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit ba22d10f39eaeedd035e8265616e31ff88e314d5 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Aug 13 18:03:40 2008 -0500 |
| |
| quad100hd: Update NAND driver to new API. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Aug 13 17:53:48 2008 -0500 |
| |
| m5373evb: Update NAND driver to new API. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 1a23a197c8722b805f40895544bbdb1a648c1c82 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Aug 13 17:04:30 2008 -0500 |
| |
| s3c24x0: Update NAND driver to new API. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Aug 13 15:56:00 2008 -0500 |
| |
| at91: Update board NAND drivers to current API. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit d438d50848e9425286e5fb0493e0affb5a0b1e1b |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Wed Aug 13 09:11:02 2008 +0900 |
| |
| Fix OneNAND build break |
| |
| Since page size field is changed from oobblock to writesize. But OneNAND is not updated. |
| - fix bufferram management at erase operation |
| This patch includes the NAND/OneNAND state filed too. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 9483df6408c25f16060432de3868901e352e23bc |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:43 2008 +0200 |
| |
| drivers/mtd/nand_legacy: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:43 2008 +0200 |
| |
| drivers/mtd/nand: Move conditional compilation to Makefile |
| |
| rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4fb09b81920e5dfdfc4576883186733f0bd6059c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:42 2008 +0200 |
| |
| drivers/mtd/onenand: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 00b1883a4cac59d97cd297b1a3a398db85982865 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:42 2008 +0200 |
| |
| drivers/mtd: Move conditional compilation to Makefile |
| |
| rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:41 2008 +0200 |
| |
| drivers/qe: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:40 2008 +0200 |
| |
| drivers/pci: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 55d6d2d39fe3fe87802e399aa17539368b495d2e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:40 2008 +0200 |
| |
| drivers/misc: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:40 2008 +0200 |
| |
| drivers/input: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 88f57e093114a44aa9a858d52b099bcc52034a8c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:39 2008 +0200 |
| |
| drivers/dma: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:39 2008 +0200 |
| |
| drivers/block: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:39 2008 +0200 |
| |
| serial: move CFG_NS9750_UART to CONFIG_NS9750_UART |
| |
| move also conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:38 2008 +0200 |
| |
| serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE |
| |
| move also conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d6e9ee92e890f67594ab150689510df361133ead |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:38 2008 +0200 |
| |
| common: Move conditional compilation to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f5acb9fd9bba1160de3ef349c7d33fe510eda286 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Aug 13 01:40:09 2008 +0200 |
| |
| mx31: move freescale's mx31 boards to vendor board dir |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Jul 5 23:11:11 2008 +0200 |
| |
| at91: move arch-at91sam9 to arch-at91 |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 195ccfc5991d48764b2519941e3507f693851d5d |
| Author: Fathi BOUDRA <fabo@debian.org> |
| Date: Wed Aug 6 10:06:20 2008 +0200 |
| |
| OneNAND: Fill in MTD function pointers for OneNAND. |
| |
| onenand_print_device_info(): |
| - Now returns a string to be placed in mtd->name, |
| rather than calling printf. |
| - Remove verbose parameter as it becomes useless. |
| |
| Signed-off-by: Fathi Boudra <fabo@debian.org> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit aa646643b6bc250cb3a4966bf728876e0c10d329 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Wed Aug 6 21:42:07 2008 +0200 |
| |
| nand_spl: Support page-aligned read in nand_load, use chipselect |
| |
| Supporting page-aligned reads doesn't incure any sinificant overhead, just |
| a small change in the algorithm. Also replace in_8 with readb, since there |
| is no in_8 on ARM. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Tue Aug 5 11:15:59 2008 -0500 |
| |
| NAND boot: Update large page support for current API. |
| |
| Also, remove the ctrl variable in favor of passing the constants |
| directly, and remove redundant (u8) casts. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit e4c09508545d1c45617ba45391c03c03cbc360b9 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Jun 30 14:13:28 2008 -0500 |
| |
| NAND boot: MPC8313ERDB support |
| |
| Note that with older board revisions, NAND boot may only work after a |
| power-on reset, and not after a warm reset. I don't have a newer board |
| to test on; if you have a board with a 33MHz crystal, please let me know |
| if it works after a warm reset. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Thu Jun 26 14:06:52 2008 -0500 |
| |
| mpc8313erdb: Enable NAND in config. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Jul 31 12:38:26 2008 +0200 |
| |
| NAND: Do not write or read a whole block if it is larger than the environment |
| |
| Environment can be smaller than NAND block size, do not need to read a whole |
| block and minimum for writing is one page. Also remove an unused variable. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit eafcabd15f00c142156235c519fcc55b10993241 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Sun Jun 22 16:30:06 2008 +0200 |
| |
| NAND: chip->state does not always get set. |
| |
| Fixes an issue with chip->state not always being set causing troubles. |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde |
| Author: Ilya Yanok <yanok@emcraft.com> |
| Date: Mon Jun 30 15:34:40 2008 +0200 |
| |
| NAND: Scan bad blocks lazily. |
| |
| Rather than scanning on boot, scan upon the first attempt to check the |
| badness of a block. This speeds up boot when not using NAND, and reduces |
| the likelihood of needing to reflash via JTAG if NAND becomes |
| nonfunctional. |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit dfbf617ff055e4216f78d358b0867c548916d14b |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Thu Jun 12 13:20:16 2008 -0500 |
| |
| NAND read/write fix |
| |
| Implement block-skipping read/write, based on a patch from |
| Morten Ebbell Hestens <morten.hestnes@tandberg.com>. |
| |
| Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 984e03cdf1431bb593aeaa1b74c445d616f955d3 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Thu Jun 12 13:13:23 2008 -0500 |
| |
| NAND: Always skip blocks on read/write/boot. |
| |
| Use of the non-skipping versions was almost always (if not always) |
| an error, and no valid use case has been identified. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit e1c3dbada349992875934575c97b328ab2cb33ca |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu Jun 12 11:10:21 2008 -0500 |
| |
| nand: fsl_upm: convert to updated MTD NAND infrastructure |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 300253306acc72b1b2e9faf0987f86551151d7cf |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Thu May 22 15:02:46 2008 -0500 |
| |
| fsl_elbc_nand: Hard-code the FBAR/FPAR split. |
| |
| The hardware has separate registers for block and page-within-block, |
| but the division between the two has no apparent relation to the |
| actual erase block size of the NAND chip. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 9c814b0a716aae884bec977b9a032dfa59cfb79a |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Fri Mar 28 22:10:54 2008 +0300 |
| |
| fsl_elbc_nand: workaround for hangs during nand write |
| |
| Using current driver elbc sometimes hangs during nand write. Reading back |
| last byte helps though (thanks to Scott Wood for the idea). |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Fri Mar 21 16:12:51 2008 -0500 |
| |
| Freescale eLBC FCM NAND driver |
| |
| This is a driver for the Flash Control Machine of the enhanched Local Bus |
| Controller found on some Freescale chips (such as the mpc8313 and the |
| mpc8379). |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Tue Mar 18 15:29:14 2008 -0500 |
| |
| Don't panic if a controller driver does ecc its own way. |
| |
| Some hardware, such as the enhanced local bus controller used on some |
| mpc83xx chips, does ecc transparently when reading and writing data, rather |
| than providing a generic calculate/correct mechanism that can be exported to |
| the nand subsystem. |
| |
| The subsystem should not BUG() when calculate, correct, or hwctl are |
| missing, if the methods that call them have been overridden. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit e52b34d40a8a646e3d11638ea8797e96398dba13 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 10 18:47:33 2008 +0100 |
| |
| NAND: Make NAND driver less verbose per default |
| |
| This patch turns off printing of bad blocks per default upon bootup. |
| This can always be shown via the "nand bad" command later. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fe56a2772e5c59577df906163d0d4b29b056140e |
| Author: Sergey Kubushyn <ksi@koi8.net> |
| Date: Wed Jan 9 15:36:20 2008 +0100 |
| |
| NAND: Davinci driver updates |
| |
| Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I |
| don't have hardware handy so I can not test it at the moment but changes are |
| rather trivial so it should work. It would be nice if somebody with a |
| hardware checked it anyways. |
| |
| Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| |
| commit deac913effd8d80535c9ff4687b6fcdff540c554 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 16:50:32 2008 +0100 |
| |
| NAND: Fix compilation warning and small coding style issue |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c568f77acdf896fc3dd6413ce53205b17ba809a3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 16:49:37 2008 +0100 |
| |
| NAND: Update nand_spl driver to match updated nand subsystem |
| |
| This patch changes the NAND booting driver nand_spl/nand_boot.c to match |
| the new infrastructure from the updated NAND subsystem. This NAND |
| subsystem was recently synced again with the Linux 2.6.22 MTD/NAND |
| subsystem. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3df2ece0f0fbba47d27f02fff96c533732b98c14 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 16:47:58 2008 +0100 |
| |
| NAND: Update 4xx NDFC driver to match updated nand subsystem |
| |
| This patch changes the 4xx NAND driver ndfc.c to match the new |
| infrastructure from the updated NAND subsystem. This NAND |
| subsystem was recently synced again with the Linux 2.6.22 MTD/NAND |
| subsystem. |
| |
| Tested successfully on AMCC Sequoia and Bamboo. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 12072264528eba33737bc9674e19f0e925ffda23 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 16:43:25 2008 +0100 |
| |
| NAND: Change nand_wait_ready() to not call nand_wait() |
| |
| This patch changes nand_wait_ready() to not just call nand_wait(), |
| since this will send a new command to the NAND chip. We just want to |
| wait for the chip to become ready here. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ad754fef5053144daed3b007adaf1c9bec654c9 |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Fri Dec 14 16:33:45 2007 +0100 |
| |
| make nand dump and nand dump.oob work |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838 |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Mon Nov 19 14:46:00 2007 +0100 |
| |
| moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| |
| commit 98824ce3f95e6c4d08d439b779c0acb0048045a6 |
| Author: William Juul <william.juul@tandberg.com> |
| Date: Tue Jun 10 16:18:13 2008 -0500 |
| |
| Clean out unneeded files |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| |
| commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23 |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Fri Nov 16 08:44:27 2007 +0100 |
| |
| Create symlinks from yaffs2/direct to yaffs2 |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| |
| commit 90ef117b68387d66763291af0117677644166611 |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Thu Nov 15 12:23:57 2007 +0100 |
| |
| Incorporate yaffs2 into U-boot |
| |
| To use YAFFS2 define CONFIG_YAFFS2 |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61 |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Thu Nov 15 11:13:05 2007 +0100 |
| |
| YAFFS2 import |
| |
| Direct import of yaffs as a tarball as of 20071113 from their public |
| CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/ |
| |
| The code can also be imported on the command line with: |
| export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon |
| (Hit return when asked for a password) |
| cvs checkout yaffs2 |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| Signed-off-by: Stig Olsen <stig.olsen@tandberg.com> |
| |
| commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038 |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Wed Nov 14 14:28:11 2007 +0100 |
| |
| Whitespace cleanup and marking broken code. |
| |
| Changes requested by maintainer Stefan Roese after |
| posting patch to U-boot mailing list. |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Fri Nov 9 13:32:30 2007 +0100 |
| |
| Fixing coding style issues |
| |
| - Fixing leading white spaces |
| - Fixing indentation where 4 spaces are used instead of tab |
| - Removing C++ comments (//), wherever I introduced them |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 4cbb651b29cb64d378a06729970e1e153bb605b1 |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Thu Nov 8 10:39:53 2007 +0100 |
| |
| Remove white space at end. |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b |
| Author: William Juul <william.juul@datarespons.no> |
| Date: Wed Oct 31 13:53:06 2007 +0100 |
| |
| Update MTD to that of Linux 2.6.22.1 |
| |
| A lot changed in the Linux MTD code, since it was last ported from |
| Linux to U-Boot. This patch takes U-Boot NAND support to the level |
| of Linux 2.6.22.1 and will enable support for very large NAND devices |
| (4KB pages) and ease the compatibility between U-Boot and Linux |
| filesystems. |
| |
| This patch is tested on two custom boards with PPC and ARM |
| processors running YAFFS in U-Boot and Linux using gcc-4.1.2 |
| cross compilers. |
| |
| MAKEALL ppc/arm has some issues: |
| * DOC/OneNand/nand_spl is not building (I have not tried porting |
| these parts, and since I do not have any HW and I am not familiar |
| with this code/HW I think its best left to someone else.) |
| |
| Except for the issues mentioned above, I have ported all drivers |
| necessary to run MAKEALL ppc/arm without errors and warnings. Many |
| drivers were trivial to port, but some were not so trivial. The |
| following drivers must be examined carefully and maybe rewritten to |
| some degree: |
| cpu/ppc4xx/ndfc.c |
| cpu/arm926ejs/davinci/nand.c |
| board/delta/nand.c |
| board/zylonite/nand.c |
| |
| Signed-off-by: William Juul <william.juul@tandberg.com> |
| Signed-off-by: Stig Olsen <stig.olsen@tandberg.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit cd82919e6c8a73b363a26f34b734923844e52d1c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 12 16:08:38 2008 +0200 |
| |
| Coding style cleanup, update CHANGELOG, prepare release |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 17e900b8c0f38d922da47073246219dce2a847f2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 12 14:54:04 2008 +0200 |
| |
| MVBC_P: fix compile problem |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 52b047ae48219b59bebe37ba743ab103fd4f8316 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 12 12:10:11 2008 +0200 |
| |
| MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk' |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c9c101c660b3d1995045c61c7c6041f52b6cf335 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 12 00:36:53 2008 +0200 |
| |
| ads5121: fix compiler warnings (unused variables) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 902ca09246039964d59bbcb519b1e1b5aed01308 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Aug 11 11:29:28 2008 -0500 |
| |
| 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS |
| |
| Use CONFIG_NUM_CPUS to match existing define used by 86xx. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3216ca9692ff80d7c638723ef448f3d36301d9e7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Aug 11 09:20:53 2008 -0500 |
| |
| Fix fallout from autostart revert |
| |
| The autostart revert caused a bit of duplicated code as well as |
| code that was using images->autostart that needs to get removed so |
| we can build again. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3cf8a234b8e8c02e4da1f23566043bc288b05220 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Aug 11 09:16:25 2008 -0500 |
| |
| Fix compile error related to r8a66597-hcd & usb |
| |
| When building the 8544DS board we get this error: |
| |
| In file included from r8a66597-hcd.c:22: |
| u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined |
| make[1]: *** [r8a66597-hcd.o] Error 1 |
| |
| The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD |
| is set. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2d0daa03612338a813e3c9d22680e54eabfea378 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Aug 4 14:02:26 2008 -0500 |
| |
| POWERPC 86xx: Move BAT setup code to C |
| |
| This is needed because we will be possibly be locating |
| devices at physical addresses above 32bits, and the asm |
| preprocessing does not appear to deal with ULL constants |
| properly. We now call write_bat in lib_ppc/bat_rw.c. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9de67149db576c91b9c2a0a182652331e7e44211 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Aug 4 14:01:53 2008 -0500 |
| |
| POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c |
| |
| Perform sync/isync as required by the architecture. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 23f935c073e7578c6066804fd2f9ee116cae6ffe |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Aug 4 14:01:16 2008 -0500 |
| |
| POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5276a3584d26a9533404f0ec00c3b61cf9a97939 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Sun Aug 3 21:44:10 2008 +0200 |
| |
| i.MX31: Fix mx31_gpio_mux() function and MUX_-macros. |
| |
| Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX |
| contacts instead of only the first 256 ones as is the case prior to |
| this patch. |
| |
| Add missing MUX_* macros and update board files to use the new macros. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Sun Aug 3 21:43:37 2008 +0200 |
| |
| i.MX31: Fix IOMUX related typos |
| |
| Correct the names of some IOMUX macros. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0 |
| Author: Steve Sakoman <steve@sakoman.com> |
| Date: Mon Aug 11 20:26:16 2008 +0200 |
| |
| OneNAND: Remove unused parameters to onenand_verify_page |
| |
| The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled. |
| |
| Signed-off-by: Steve Sakoman <steve@sakoman.com> |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit e84d568fa2a9f4ce7888141e71676368ef6b3f25 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Aug 8 18:00:40 2008 +0200 |
| |
| video: fix bug in cfb_console code |
| |
| FILL_15BIT_555RGB macro extension for pixel swapping |
| by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35 |
| introduced a bug in cfb_console: |
| |
| Bitmaps with odd-numbered width won't be rendered |
| correctly and even U-Boot crashes are observed on |
| some platforms while repeated rendering of such |
| bitmaps with "bmp display". Also if a bitmap is |
| rendered to an odd-numbered x starting position, |
| the same problem occurs. This patch is an attempt |
| to fix it. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit d9015f6a50d7258125349ef5c2af836458a0029a |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Aug 8 18:00:39 2008 +0200 |
| |
| video: fix bug in logo_plot |
| |
| If logo_plot() should ever be called with x starting |
| position other than zero and for pixel depths greater |
| than 8bpp, logo colors distortion will be observed. |
| This patch fixes the issue. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 406819ae94f79f5b59e01d163380ca7d83709251 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 11 00:17:52 2008 +0200 |
| |
| MAINTAINERS: sort entries |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Thu Aug 7 18:19:28 2008 +0800 |
| |
| Add mpc7448hpc2 maintainer information |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8 |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Thu Aug 7 13:13:27 2008 +0530 |
| |
| common/cmd_load.c - Minor code & Coding Style cleanup |
| |
| - os_data_header Variable is a carry over feature |
| & unused. So removed all instance of this variable |
| - Minor Code Style Update |
| |
| Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in> |
| Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Wed Aug 6 19:32:33 2008 +0200 |
| |
| Update the U-Boot wiki URL. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754 |
| Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com> |
| Date: Sun Aug 10 17:56:36 2008 +0200 |
| |
| OneNAND: Remove base address offset usage |
| |
| While locally preparing some U-Boot patches for ARM based OMAP3 boards, some |
| using OneNAND and some using NAND, we found some differences in OneNAND and |
| NAND command address handling. |
| |
| As this might confuse users (it already confused us), we like to align OneNAND |
| and NAND address handling. |
| |
| The issue is that cmd_onenand.c subtracts the onenand base address from the |
| addresses you type into the u-boot command line so, unlike nand, you can't |
| use addresses relative to the start of the onenand part e.g. this won't work: |
| |
| onenand read 82000000 280000 400000 |
| |
| you have to use: |
| |
| onenand read 82000000 20280000 400000 |
| |
| Looking at recent git, the only board currently using OneNAND is Apollon, and |
| for this the OneNAND base address is 0 (apollon.h) |
| |
| #define CFG_ONENAND_BASE 0x00000000 |
| |
| so patch below won't break any existing boards and will align OneNAND and NAND |
| handling on boards where OneNAND base address is != 0. |
| |
| Signed-off-by: Steve Sakoman <sakoman@gmail.com> |
| Signed-off-by: Manikandan Pillai <mani.pillai@ti.com> |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit c11528083ef6e55e76df742228c26e39d151813d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 7 09:28:20 2008 -0500 |
| |
| mpc85xx: workaround old binutils bug |
| |
| The recent change to move the .bss outside of the image gives older |
| binutils (ld from eldk4.1/binutils-2.16) some headache: |
| |
| ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4) |
| ppc_85xx-ld: final link failed: Bad value |
| |
| We workaround it by being explicit about the program headers and not |
| assigning the .bss to a program header. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0bf202ec586d4466c900e987720fa635c594d689 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 10 01:26:26 2008 +0200 |
| |
| Revert "[new uImage] Add autostart flag to bootm_headers structure" |
| |
| This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004. |
| |
| The commit was based on a misunderstanding of the (documented) |
| meaning of the 'autostart' environment variable. It might cause |
| boards to hang if 'autostart' was used, with the potential to brick |
| them. Go back to the documented behaviour. |
| |
| Conflicts: |
| |
| common/cmd_bootm.c |
| common/image.c |
| include/image.h |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Aug 9 23:17:32 2008 +0200 |
| |
| TQM8xx{L,M}: try to normalize config files for TQM8xx? based board |
| |
| - enable CFI driver where this was forgotten |
| - enable mtdparts support |
| - adjust default environment |
| etc. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 41266c9b5a5f873df3ec891bb0907616958b5602 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Tue Aug 5 10:51:57 2008 -0500 |
| |
| FIT: Fix handling of images without ramdisks |
| |
| boot_get_ramdisk() should not treat the case when a FIT image does |
| not contain a ramdisk as an error. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| Acked-by: Michal Simek <monstr@monstr.eu> |
| |
| commit f77d92a3f56d88e63cc02226a1204b3bdbac6961 |
| Author: Sergey Lapin <slapin@ossfans.org> |
| Date: Sat Aug 9 01:39:09 2008 +0400 |
| |
| DataFlash: AT45DB021 fix and AT45DB081 support |
| |
| Fix for page size of AT45DB021. Also adding bigger AT45DB081 |
| which comes with some newer boards. |
| |
| Signed-off-by: Sergey Lapin <slapin@ossfans.org> |
| |
| commit ba9324451b662dd393afa53e5cc36fc5d3d10966 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Fri Aug 8 16:30:23 2008 +0900 |
| |
| sh: Update sh7763rdp config |
| |
| Add sh_eth support to sh7763rdp. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| |
| commit 21f971ec265f6042ec21636d55d06a6bc0751077 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 7 01:22:29 2008 +0200 |
| |
| TQM823L: re-enable logo support; update LCD_INFO text |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Aug 8 16:41:56 2008 +0200 |
| |
| TQM8xxL: fix support for second flash bank |
| |
| When switching the TQM8xxL modules to use the CFI flash driver, |
| support for the second flash bank was broken because the CFI driver |
| did not support dynamically sized banks. This gets fixed now. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2a112b234d879f6390503a5f4e38246acce9d0b0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Aug 8 16:39:54 2008 +0200 |
| |
| CFI: allow for dynamically determined flash sizes and addresses |
| |
| The CFI driver allowed only for static initializers in the |
| CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map |
| several flash banks contiguously if the bank sizes were not known in |
| advance, which kind of violates U-Boot's design philosophy. |
| |
| (will be used for example by the TQM8xxL boards) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Thu Aug 7 23:26:35 2008 -0700 |
| |
| QE UEC: Fix compiler warnings |
| |
| Moved static functions earlier in file so forward declarations are not needed. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d5d28fe4aad5f4535400647a5617c11039506467 |
| Author: David Saada <David.Saada@ecitele.com> |
| Date: Mon Mar 31 02:37:38 2008 -0700 |
| |
| QE UEC: Add MII Commands |
| |
| Add MII commands to the UEC driver. Note that once a UEC device is selected, |
| any device on its MDIO bus can be addressed. |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7 |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Wed Jul 9 21:07:38 2008 +0900 |
| |
| usb: add support for R8A66597 usb controller |
| |
| add support for Renesas R8A66597 usb controller. |
| This patch supports USB Host mode. |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 1d10dcd041aaeae9fd7c821005692898a0303382 |
| Author: Hunter, Jon <jon-hunter@ti.com> |
| Date: Sat Jul 26 18:59:16 2008 -0500 |
| |
| Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c |
| |
| Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices. |
| |
| Signed-off-by: Jon Hunter <jon-hunter@ti.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit eab1007334b93a6209f1ec33615e26ef5311ede7 |
| Author: Steven A. Falco <sfalco@harris.com> |
| Date: Wed Aug 6 15:42:52 2008 -0400 |
| |
| ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic. |
| |
| The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO |
| configuration to match the schematic, and also sets the SDR0_PFC1 register to |
| select the corresponding mode for the UARTs. |
| |
| Signed-off-by: Steven A. Falco <sfalco@harris.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5 |
| Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> |
| Date: Wed Aug 6 14:42:13 2008 +0200 |
| |
| avr32: add support for EarthLCD Favr-32 board |
| |
| This patch adds support for the Favr-32 board made by EarthLCD. |
| |
| This kit, which is also called ezLCD-101 when running with EarthLCD firmware, |
| has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash, |
| Ethernet, audio out, USB device, SD-card slot, USART and various other |
| connectors for cennecting stuff to SPI, I2C, GPIO, etc. |
| |
| Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit bc9019e19758a19a388fb20ef18dc771cd39fdda |
| Author: Rafael Campos <rafael.campos@hanscan.com> |
| Date: Thu Jul 31 10:22:20 2008 +0200 |
| |
| cfi-flash: Added support to flash_real_protect for Atmel flash devices |
| |
| Some of the flash memories produced by ATMEL start in read-only mode. |
| We need to unprotect it. This patch allows the AT49BV6416 to work with |
| cfi_flash memories. Tested in the at91rm9200ek board. |
| |
| Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7949839e5836bf8b1074bb6142c46d30ac3aa350 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Aug 5 15:36:39 2008 +0200 |
| |
| cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1318673045fe188c6e24c582b1e6efc00ae1c62c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 6 14:06:03 2008 +0200 |
| |
| Fix merge problems |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f2302d4430e7f3f48308d6a585320fe96af8afbd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 6 14:05:38 2008 +0200 |
| |
| Fix merge problems |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d |
| Author: Kenneth Johansson <kenneth@southpole.se> |
| Date: Tue Jul 15 12:13:38 2008 +0200 |
| |
| mpc5121: Move iopin features from board specific to common files. |
| |
| And in the process eliminate some duplicate register defines. |
| |
| Signed-off-by: Kenneth Johansson <kenneth@southpole.se> |
| |
| commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12 |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Tue Aug 5 17:38:57 2008 -0600 |
| |
| mpc5121: squash some fdt fixup errors |
| |
| On ADS5121 when booting linux the following errors are seen: |
| Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND |
| Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND |
| Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND |
| |
| This is caused by ft_cpu_setup trying to deal with |
| both old and new soc node naming. This patch |
| fixes this by being smarter about what to |
| fixup. |
| |
| Also do soc node fixups by compatible instead of by path. |
| A new board config called OF_SOC_COMPAT defined |
| to be "fsl,mpc5121-immr" replaces the old |
| OF_SOC node path that was defined to be "soc@80000000". |
| |
| Old device trees still work, but the compatiblity |
| is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES |
| which is on by default in include/configs/ads5121.h. |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 2 23:48:30 2008 +0200 |
| |
| drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4cd7e6528f61ec669755c3754bb4f9779874fab3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 2 23:48:32 2008 +0200 |
| |
| nios2/sysid: fix printf warning |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 66da6fa0e35e7ee56628c85981709afe7180fc8e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 2 23:48:33 2008 +0200 |
| |
| Fix remaining build issues with MPC8xx FADS boards. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 2 23:48:31 2008 +0200 |
| |
| nios2: fix phys_addr_t and phys_size_t support |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Aug 2 23:48:34 2008 +0200 |
| |
| mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f |
| Author: Mark Jackson <mpfj@mimc.co.uk> |
| Date: Fri Aug 1 09:48:29 2008 +0100 |
| |
| Fix bitmap display for atmel lcd controller |
| |
| The current lcd_display_bitmap() function does not work properly |
| for the Atmel LCD controller. |
| |
| 2 fixes need to be done:- |
| |
| (a) when setting the colour map, use the lcd_setcolreg() function |
| as provided by the Atmel driver |
| (b) the data is never actually written to the lcd framebuffer !! |
| |
| Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> |
| |
| commit 2a433c66b1e2770349fe4911be23c375f053ebd8 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Aug 1 08:40:34 2008 +0200 |
| |
| qemu_mips: update README to follow qemu update about default machine |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit ac169d645f5f0e0b9a232563099209e92a355d8e |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 31 19:53:21 2008 -0500 |
| |
| ColdFire: Fix compilation issue caused by a missing function |
| |
| Implement usec2ticks() which is used by fsl_i2c.c in |
| lib_m68k/time.c |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 31 19:53:06 2008 -0500 |
| |
| Fix compilation error for TASREG |
| |
| TASREG is ColdFire platform, the include ppc4xx.h in |
| board/esd/common/flash.c causes conflict. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 31 19:52:36 2008 -0500 |
| |
| Fix compilation error for MCF5275 |
| |
| Rename OBJ to COBJ in board/platform/Makefile |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 5c40548f01218360a1f1395198c50ff45f3035b5 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 31 19:52:28 2008 -0500 |
| |
| Fix compile error caused by incorrect function return type |
| |
| Rename int mii_init(void) to void mii_init(void) for idmr |
| ColdFire platform |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a58c78067c928976c082c758d3987e89ead5b191 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Aug 1 12:06:22 2008 +0200 |
| |
| Fix build issues with MPC8xx FADS boards. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 31 17:54:03 2008 +0200 |
| |
| Prepare v1.3.4-rc2: update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4 |
| Author: Mark Jackson <mpfj@mimc.co.uk> |
| Date: Thu Jul 31 16:09:00 2008 +0100 |
| |
| Add gzipped logo support |
| |
| The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows: |
| |
| If this option is set, additionally to standard BMP |
| images, gzipped BMP images can be displayed via the |
| splashscreen support or the bmp command. |
| |
| However, the splashscreen function *only* supports standard BMP images. |
| |
| This patch adds the documented gzip support. |
| |
| Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> |
| |
| commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac |
| Author: Mark Jackson <mpfj@mimc.co.uk> |
| Date: Thu Jul 31 15:56:48 2008 +0100 |
| |
| Fix Atmel LCD controller endianess for AVR32 processors |
| |
| The Atmel lcd controller is used on Atmel's AT91 (little endian) and |
| AVR32 (big endian) platforms. |
| |
| As such, the controller can handle both big and little endian memory. |
| |
| This patch fixes the driver for the AVR32 platform. |
| |
| Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> |
| |
| commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Jul 31 15:56:01 2008 +0200 |
| |
| apollon: fix build out of tree |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2e752be39d3e398d4ab89ffa6634c397df298297 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Jul 31 12:35:04 2008 +0200 |
| |
| Uncompressed images loaded to their start address shall set load_end too |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c37207d7f51e19c17f859966f314e27cc1231801 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 16 16:38:59 2008 +0200 |
| |
| Fix printf() format problems with configurable prompts |
| |
| U-Boot allows for configurable prompt strings using the |
| CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far, |
| the assumption was that any such user defined problts would contain |
| exactly one "%d" format specifier. But some boards did not. |
| |
| To allow for flexible boot prompts without adding too complex code we |
| now allow to specify the whole list of printf() arguments in the user |
| definition. This is powerful, but requires a responsible user who |
| really understands what he is doing, as he needs to know for exanple |
| which variables are available in the respective context. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 54754120637b6a7f4ff774fb199fc550bcfea1da |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 31 17:02:14 2008 +0200 |
| |
| TQM85xx: fix typo introduce by commit ffbb5cb9 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0b4951d4cddca9cc800745891c95b291e47cbbd7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 31 15:27:01 2008 +0200 |
| |
| mvbc_p board: fix most build warnings. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c4ec6db074051d2f6fc76a66411c60621b22bc02 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 31 13:57:20 2008 +0200 |
| |
| E1000: clean up CONFIG_E1000_FALLBACK_MAC handling |
| |
| Avoid "integer constant is too large for 'long' type" warnings. |
| And simplify the code. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9196b44334c330cc13de2464c59181e4db71f549 |
| Author: Matvejchikov Ilya <matvejchikov@gmail.com> |
| Date: Wed Jul 30 23:21:19 2008 +0400 |
| |
| 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI |
| |
| Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> |
| |
| commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0 |
| Author: Matvejchikov Ilya <matvejchikov@gmail.com> |
| Date: Wed Jul 30 23:20:32 2008 +0400 |
| |
| PPC: Add pci_clk in the global_data for CPM2 processors |
| |
| This patch adds pci_clk field to the global_data structure for the |
| processors which have CPM2 module in case the CONFIG_PCI is defined. |
| |
| Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> |
| |
| commit f0ff885ca64655bee6540eb8a25eed90b1152686 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jul 30 14:13:30 2008 -0500 |
| |
| mpc85xx: Update linker scripts for Freescale boards |
| |
| * Move to using absolute addressing always. Makes the scripts a bit more |
| portable and common |
| * Moved .bss after the end of the image. These allows us to have more |
| room in the resulting binary image for code and data. |
| * Removed .text object files that aren't really needed |
| * Make sure _end is 4-byte aligned as the .bss init code expects this. |
| (Its possible that the end of .bss isn't 4-byte aligned) |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 57c219ad5d34dd9d49991777a62e3899595f2ec7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jul 30 08:01:15 2008 -0500 |
| |
| Fix compile warnings in dlmalloc |
| |
| The origional code was using on odd reference to get to the first |
| real element in av_[]. The first two elements of the array are |
| not used for actual bins, but for house keeping. If we are more |
| explicit about how use the first few elements we can get rid of the |
| warnings: |
| |
| dlmalloc.c: In function 'malloc_extend_top': |
| dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules |
| dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules |
| dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules |
| ... |
| |
| The logic of how this code came to be is: |
| bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ |
| |
| SIZE_SZ is the size of pointer, and av_ is arry of pointers so: |
| bin_at(0) = &(av_[0]) |
| |
| Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 30 10:21:01 2008 +0200 |
| |
| ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 30 09:59:51 2008 +0200 |
| |
| cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)' |
| |
| A recent patch used '#if (CONFIG_CMD_USB)' instead of |
| '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes |
| common/bootm.c compile again. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 2cb9080427fe641dcb71da46cd0634dd406f37ed |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Tue Jul 22 08:01:43 2008 +0900 |
| |
| Remove unused I2C at apollon board |
| |
| There are no I2C devices on this board. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 3c95960e526b3b026da20201db64526f46faf14b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 31 10:12:09 2008 +0200 |
| |
| at91rm9200dk, csb637: fix NAND related build problems |
| |
| Tried fixing NAND support for the at91rm9200dk board; untested. |
| Disabled NAND support in the csb637 board config file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Wed Jul 30 12:39:28 2008 +0200 |
| |
| ppc4xx: ML507: Environment in flash and MTD Support |
| |
| - Relocate the location of U-Boot in the flash |
| - Save the environment in one sector of the flash memory |
| - MTD Support |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Tue Jul 29 17:16:10 2008 +0200 |
| |
| ppc4xx: ML507: Use of get_ram_size in board ml507 |
| |
| - Change suggested by WD |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Mon Jul 21 20:30:07 2008 +0200 |
| |
| ppc4xx: ML507: U-Boot in flash and System ACE |
| |
| This patch allows booting from FLASH the ML507 board by Xilinx. |
| Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783 |
| Author: Julien May <mailinglist@miromico.ch> |
| Date: Mon Jun 23 13:57:52 2008 +0200 |
| |
| Add support for the hammerhead (AVR32) board |
| |
| The Hammerhead platform is built around a AVR32 32-bit microcontroller |
| from Atmel. It offers versatile peripherals, such as ethernet, usb |
| device, usb host etc. |
| |
| The board also incooperates a power supply and is a Power over Ethernet |
| (PoE) Powered Device (PD). |
| |
| Additonally, a Cyclone III FPGA from Altera is integrated on the board. |
| The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two |
| DDR2 SDRAM interfaces, which will cover even the most exceptional need |
| of memory bandwidth. Together with the onboard video decoder the board |
| is ready for video processing. |
| |
| For more information see: http:///www.miromico.com/hammerhead |
| |
| Signed-off-by: Julien May <mailinglist@miromico.ch> |
| [haavard.skinnemoen@atmel.com: various small fixes and adaptions] |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 09d318a8bb1444ec92e31cafcdba877eb9409e58 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jul 29 12:23:49 2008 -0500 |
| |
| fsl_i2c: Use timebase timer functions instead of get_timer() |
| |
| The current implementation of get_timer() is only really useful after we |
| have relocated u-boot to memory. The i2c code is used before that as part |
| of the SPD DDR setup. |
| |
| We actually have a bug when using the get_timer() code before relocation |
| because the .bss hasn't been setup and thus we could be reading/writing |
| a random location (probably in flash). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4 |
| Author: Frank Svendsbøe <frank.svendsboe@gmail.com> |
| Date: Tue Jul 29 14:49:31 2008 +0200 |
| |
| Adder8xx: Fix CFG_MONITOR_LEN |
| |
| Due to increased space usage, U-Boot can no longer be stored in three sectors. |
| The current U-Boot use just over three flash sectors (197k), and U-Boot will |
| become corrupt after saving environment variables. This patch adds another 64k |
| to CFG_MONITOR_LEN. |
| |
| Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com> |
| |
| commit a4c59ad4a21140550ada6f97690d2527c4146ce5 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Tue Jul 29 08:47:57 2008 +0900 |
| |
| Add OneNAND IPL related files to gitignore |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 8d87589e8e874df7120a3d9667f051bc33bac250 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Mon Jul 28 20:38:25 2008 +0200 |
| |
| API: Teach the storage layer about SATA and MMC options. |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| Acked-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Mon Jul 28 20:37:48 2008 +0200 |
| |
| API: Dump contents of sector 0 in the demo application. |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| Acked-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 13ca6305f2eba49c175f6370c35286141059c789 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Mon Jul 28 20:37:10 2008 +0200 |
| |
| API: Correct storage enumeration routine, other minor fixes in API storage area. |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| Acked-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Mon Jul 28 20:36:19 2008 +0200 |
| |
| API: Fix compilation warnings in api_examples/demo.c. |
| |
| Signed-off-by: Rafal Czubak <rcz@semihalf.com> |
| |
| commit c14eefcc48212af2f3314809605698dd8393a90a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Jul 27 17:09:43 2008 +0200 |
| |
| Fix more printf() format warnings |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 936897d4d1365452bbbdf8430db5e7769ef08d38 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Jul 25 15:18:16 2008 +0200 |
| |
| Fix remaining CFG_CMD_ define, ifdef and comments |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 5d1d00fb36005482e1803a00ddc46efa11d719af |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Fri Jul 25 08:57:40 2008 +0200 |
| |
| Add include for config.h in command.h. |
| |
| Because the cmd_tbl_s structure depends on the configuration file, it |
| must be assured that config.h is included before the structure is |
| evaluated by the compiler. If this is not certain, it could happen |
| that the compiler generates structures of different size, depending |
| on the fact if the source file includes <config.h> before or after |
| <command.h>. |
| |
| The effect is that u-boot crashes when tries to relocate the command |
| table (for ppc) or try to access to the command table for other |
| architectures. |
| |
| The problem can happen on board-depending commands. All general |
| commands under /common are unaffected, because they include already |
| config.h before command.h. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Jul 23 13:16:06 2008 -0500 |
| |
| NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile. |
| |
| This fixes building out-of-tree. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 36d59bd9da9e15d19b867b48449408830f4e2ad5 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Wed Jul 23 07:30:46 2008 +0200 |
| |
| Fix warnings if compiling with IDE support. |
| |
| cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior |
| cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 7610db17fd4d59c51d825488526d85ede2f06767 |
| Author: Adrian Filipi <adrian.filipi@eurotech.com> |
| Date: Tue Jul 22 14:28:11 2008 -0400 |
| |
| Removed support for the adsvix board. |
| |
| Support for the adsvix was originally provided by Applied Data |
| Systems (ADS), inc., now EuroTech, Inc. |
| The board never shipped aside from some sample boards. |
| |
| Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com> |
| |
| commit f96b44cef897bd372beb86dde1b33637c119d84d |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Jul 22 16:22:11 2008 +0200 |
| |
| ARM: set GD_FLG_RELOC for boards skipping relocation to RAM |
| |
| If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually |
| never set, because relocation to RAM is actually never done by U-boot |
| itself. However, several pieces of code check if this flag is set at |
| some time. |
| |
| So, to make sure this flag is set on boards skipping relocation, this |
| is added to the initialisation of U-boot at a moment where it is safe |
| to do so. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| |
| commit e4dafff86f289b5677143a3e41da7b45c6d27fc7 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Jul 21 14:26:23 2008 -0500 |
| |
| fsl-i2c: fix writes to data segment before relocation |
| |
| Prevent i2c_init() in fsl_i2c.c from writing to the data segment before |
| relocation. Commit d8c82db4 added the ability for i2c_init() to program the |
| I2C bus speed and save the value in i2c_bus_speed[], which is a global |
| variable. It is an error to write to the data segment before relocation, |
| which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[]. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21 |
| Author: Wolfgang Ocker <weo@reccoware.de> |
| Date: Mon Jul 28 16:56:51 2008 +0200 |
| |
| mips: Fix baudrate divisor computation on alchemy cpus |
| |
| Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor |
| on alchemy cpus. |
| |
| Signed-off-by: Wolfgang Ocker <weo@reccoware.de> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit c8c845cfdc6d0217135c1d5927eebd2b133a3314 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sat Jul 5 00:08:48 2008 -0700 |
| |
| Moved initialization of AVR32 Ethernet controllers to board_eth_init() |
| |
| Renamed initialization functions for atngw100 and atstk1000. |
| Removed initializations for these boards from net/eth.c |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit a229d291f33308ab7761d39f25fa1a53c0fc00a2 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Jul 23 10:55:46 2008 +0200 |
| |
| spi flash: Fix printf() format warnings |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Jul 23 10:55:31 2008 +0200 |
| |
| atmel_mci: Fix printf() format warnings |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Jul 23 10:55:15 2008 +0200 |
| |
| avr32: Fix printf() format warnings |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Jul 23 10:52:19 2008 +0200 |
| |
| avr32: asm/io.h needs asm/types.h |
| |
| map_physmem() takes a phys_addr_t as parameter. This type is defined in |
| asm/types.h, so we need to include that file. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Thu Jul 17 12:25:46 2008 +0200 |
| |
| microblaze: Fix printf() format issues |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0 |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Thu Jul 17 07:27:51 2008 +0530 |
| |
| Remove unused code from lib_arm/bootm.c |
| |
| Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit ffbb5cb942e9856fa24e946977e0a60c64df04ab |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Wed Jul 16 18:56:45 2008 +0200 |
| |
| tqm85xx: Demystify 'DK: !!!' comment |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit b2f44ba570f3a01113bbb745daf46f3858d22f53 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Wed Jul 16 18:56:44 2008 +0200 |
| |
| 83xx/85xx/86xx: Add LTEDR local bus definitions |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494 |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Wed Jul 16 16:22:32 2008 +0200 |
| |
| serial_xuartlite.c: fix compiler warnings |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 18 11:03:35 2008 +0200 |
| |
| POST: Add disable interrupts in some of the missing CPU POST tests |
| |
| Some CPU POST tests did not disable the interrupts while running. This |
| seems to be necessary to protect this self modifying code. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 97a3bf268d096e0e97e54048448c35114edcf557 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 18 10:43:24 2008 +0200 |
| |
| ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL |
| |
| This is needed for boards that define CFG_64BIT_STRTOUL but don't define |
| CFG_64BIT_LBA. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0043ac55024963295fc79b39af85b6dc3b261e17 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Fri Jul 18 11:22:23 2008 +0200 |
| |
| POST PPC4xx/spr IVPR only if PPC440 |
| |
| The SPR IVPR register is only present (as far as I know) for |
| processors with a PPC440 core. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 1092fbd64748dfa2e979b102611ece9bc5ec1855 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 18 10:42:29 2008 +0200 |
| |
| ppc4xx: Enable 64bit printf format on 440/460 platforms |
| |
| This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all |
| 440/460 platforms. This may be needed since those platforms support |
| 36bit physical address space. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 18 15:57:23 2008 +0200 |
| |
| ppc4xx: Fix incorrect MODTx setup for some DIMM configurations |
| |
| This patch fixes a problem with incorrect MODTx (On Die Termination) |
| setup for a configuration with multiple DIMM's and multiple ranks. |
| Without this change Katmai was unable to boot Linux with DDR2 frequency |
| >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux |
| with DDR2 frequency = 640MHz and mem=4GB. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 18 12:24:41 2008 +0200 |
| |
| ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Thu Jul 17 12:47:09 2008 +0200 |
| |
| ppc4xx: ML507 Board Support |
| |
| The Xilinx ML507 Board is a Virtex 5 prototyping board that includes, |
| among others: |
| -Virtex 5 FX FPGA (With a ppc440x5 in it) |
| -256MB of SDRAM2 |
| -32MB of Flash |
| -I2C Eeprom |
| -System ACE chip |
| -Serial ATA connectors |
| -RS232 Level Conversors |
| -Ethernet Transceiver |
| |
| This patch gives support to a standard design produced by EDK for this |
| board: ppc440, uartlite, xilinx_int and flash |
| |
| - Includes Changes propossed by Stefan Roese and Michal Simek |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit d865fd09809a3a18669f35f970781820af40e4de |
| Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Date: Thu Jul 17 11:44:12 2008 +0200 |
| |
| ppc4xx: CPU PPC440x5 on Virtex5 FX |
| |
| -This patchs gives support for the embbedded ppc440 |
| on the Virtex5 FPGAs |
| -interrupts.c divided in uic.c and interrupts.c |
| -xilinx_irq.c for xilinx interrupt controller |
| -Include modifications propossed by Stefan Roese |
| |
| Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 340ccb260f21516be360745d5c5e3bd0657698df |
| Author: Sebastian Siewior <bigeasy@linutronix.de> |
| Date: Wed Jul 16 20:04:49 2008 +0200 |
| |
| cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA |
| |
| This got broken by commits 93c56f212c |
| [cfi_flash: support of long cmd in U-boot.] |
| |
| That command needs to be in little endian format on BE machines |
| with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0 |
| gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into |
| the cmdbuf in case portwidth = chipwidth = 8bit. |
| |
| Cc: Alexey Korolev <akorolev@infradead.org> |
| Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> |
| Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> |
| |
| commit 11188d55bc16dd907451c00282e00a038f73dd62 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 17 10:40:51 2008 +0200 |
| |
| ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 021f6df6e96af5b387810cf96d24848da1faa55c |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu Jul 10 17:20:51 2008 +0400 |
| |
| 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup |
| |
| The thinko was quite silly indeed, I messed with !ptr. Normally this |
| would trigger some fault, but in U-Boot NULL pointer is equal to phys |
| 0, so the code was working still, just didn't actually test mpc8315erdb |
| environment variable value. Heh. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Tue Jul 8 21:00:04 2008 +0400 |
| |
| 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs |
| |
| Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI |
| support, or without TSEC1 but with USB ULPI PHY support in addition. |
| With this patch user can specify desired USB PHY. |
| |
| Also, it seems that we can't distinguish the two boards in software, so |
| user have to set `mpc8315erdb' environment variable to either 'tsec1' |
| (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that |
| Linux will not probe for TSEC1. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Tue Jul 8 20:59:43 2008 +0400 |
| |
| fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups |
| |
| Currently U-Boot can only fixup the usb dr_mode, but some boards (namely |
| MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI |
| (connected to the four-ports hub, usb host only). |
| |
| This patch implements support for passing Dual-Role USB controller's |
| device tree property phy_type through the usb_phy_type environment |
| variable. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 699f05125509249072a0b865c8d35520d97cd501 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jul 15 22:22:44 2008 +0200 |
| |
| Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit bcab74baa6b1b1c969038ab6f64a186239180405 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Tue Jul 15 11:23:02 2008 -0400 |
| |
| Round the serial port clock divisor value returned by calc_divisor() |
| |
| Round the serial port clock divisor value returned by |
| calc_divisor() |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 0328ef0edfe950f0b7b8b368dae482531506b74a |
| Author: Robin Getz <rgetz@blackfin.uclinux.org> |
| Date: Tue Jul 15 21:44:46 2008 +0200 |
| |
| Fix DHCP protocol so U-Boot does not respond too early |
| on the network with it's offered IP number; it should not reply until |
| after it has received a DHCP ACK message. Also ensures that U-Boot |
| does it's DHCPREQUEST as broadcast (per RFC 2131). |
| |
| Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> |
| Acked-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7288f972fcaee14a9741cb08c8688a23874b4a2e |
| Author: Sebastian Siewior <bigeasy@linutronix.de> |
| Date: Tue Jul 15 13:35:23 2008 +0200 |
| |
| cfi_flash: make the command u32 only |
| |
| This got changed by commit 93c56f212c |
| [cfi_flash: support of long cmd in U-boot.] |
| |
| Long is the wrong type because it will behave differently on 64bit |
| machines in a way that is probably not expected. u32 should be |
| enough. |
| |
| Cc: Alexey Korolev <akorolev@infradead.org> |
| Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> |
| Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> |
| |
| commit 31cfe57491b183acae575d486729e158f016c27b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Jul 14 23:48:41 2008 +0200 |
| |
| tools/gitignore: update to all generated files |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Wed Jul 9 18:30:44 2008 +0200 |
| |
| mpc5xxx: Add MVBC_P board support |
| |
| The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet |
| controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit e2d31fb3450653115452144363d5bde4e5e3e693 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Thu Jun 19 17:56:11 2008 -0500 |
| |
| Update Freescale sys_eeprom.c to handle CCID formats |
| |
| Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The |
| NXID format replaces the older CCID format, but it's important to support both |
| since most boards out there still use the CCID format. This change is in |
| preparation for using one file to handle both formats. This will also unify |
| EEPROM support for all Freescale 85xx and 86xx boards. |
| |
| Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR |
| instead of ID_EEPROM_ADDR. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Fri Jul 11 17:22:43 2008 +0900 |
| |
| pci: sh: Add pci_skip_dev and pci_print_dev function |
| |
| Add function of new PCI, pci_skip_dev and pci_print_dev. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 1107014e835ec9d46c0333f4211d104f77442db0 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jul 14 20:29:07 2008 -0500 |
| |
| Clean up INIT_RAM options |
| |
| The L2_INIT_RAM option was unused, and recent changes to the TLB code |
| meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce |
| the amount of mapped space attached to nothing, we change things so the TLBs |
| get cleared. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 4524561820a9327e89107854b3a7187800ccf719 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jul 14 20:26:57 2008 -0500 |
| |
| Remove fake flash bank from 8544 DS |
| |
| The fake flash bank was generating errors for anyone who didn't have a |
| PromJET hooked up to the board. As that constitutes the vast majority of |
| users, we remove it. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jul 14 14:07:03 2008 -0500 |
| |
| MPC8544DS: Add ATI Video card support |
| |
| Add support for using a PCIe ATI Video card on PCIe2. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jul 14 14:07:02 2008 -0500 |
| |
| 85xx: Add some L1/L2 SPR register definitions |
| |
| Add new L1/L2 SPRs related to e500mc cache config and control. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e5852787f0c3c442a276262f13d91ca450605ac0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jul 14 14:07:01 2008 -0500 |
| |
| MPC8544DS: Report board id, board version and fpga version. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 73f15a060f67a2462551c334215bd20fac6b81d1 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jul 14 14:07:00 2008 -0500 |
| |
| 85xx: Cleanup L2 cache size detection |
| |
| The L2 size detection code was a bit confusing and we kept having to add |
| code to it to handle new processors. Change the sense of detection so we |
| look for the older processors that aren't changing. |
| |
| Also added support for 1M cache size on 8572. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c3ca7e5e00a24451f20df3bded9a61ba541921df |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Fri Jul 11 15:33:08 2008 -0400 |
| |
| sbc8560: enable CONFIG_OF_LIBFDT by default |
| |
| Make the default build for the sbc8560 board be powerpc |
| capable with libfdt support. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jul 14 20:04:40 2008 -0500 |
| |
| Fix indentation for default boot environment variables |
| |
| This was proposed by Paul Gortmaker in response to Wolfgang's comments on |
| similar #defines in sbc8560.h. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Fri Jul 11 15:33:07 2008 -0400 |
| |
| sbc8560: add default fdt values |
| |
| Add in the default fdt settings and the typical EXTRA_ENV |
| settings as borrowed from the mpc8560ads. Fix a couple |
| of stale references to the mpc8560ads dating back to the |
| original clone/fork. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d04e76edf92f7f89696989e8702b97e020455af3 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Fri Jul 11 15:33:06 2008 -0400 |
| |
| sbc8560: add in ft_board_setup() |
| |
| Add in for the sbc8560, the ft_board_setup() routine, based on what is |
| in use for the Freescale MPC8560ADS board. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit c158bcaca3b31cbe38c4143812e6170e38a57393 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Fri Jul 11 15:33:05 2008 -0400 |
| |
| sbc8560: define eth0 and eth1 instead of eth1 and eth2 |
| |
| The existing config doesn't define CONFIG_HAS_ETH0, and so the |
| fdt support doesn't update the zeros in the dtb local-mac with |
| real data from the u-boot env. Since the existing config is |
| tailored to just two interfaces, get rid of the ETH2 definitions |
| at the same time. |
| |
| Also don't include any end user specific data into the environment |
| by default -- things like MAC address, network parameters etc. need |
| to come from the end user. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Fri Jul 11 15:33:04 2008 -0400 |
| |
| sbc8560: properly set cs0_bnds for 512MB |
| |
| The sbc8560 board ships with 512MB of memory installed, |
| but the current cs0_bnds is hard coded for 256MB. Set the |
| value based on CFG_SDRAM_SIZE. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Fri Jul 11 15:33:03 2008 -0400 |
| |
| sbc8560: proper definitions for TSEC. |
| |
| The definitions for the TSEC have become out of date. There is no |
| longer any such options like "CONFIG_MPC85xx_TSEC1" or similar. |
| Update to match those of other boards, like the MPC8560ADS. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Acked-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 71074abbe0c76429577aff58aeff0a24ad210b23 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Wed Jul 9 13:23:05 2008 -0400 |
| |
| 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq |
| |
| Some boards that have external 16550 UARTs don't have a direct |
| tie between bi_busfreq and the clock used for the UARTs. Boards |
| that do have such a tie should set CFG_NS16550_CLK to be |
| get_bus_freq(0) -- which most of them do already. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 24ef76f320fbadf074105229826514db140f939f |
| Author: Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| Date: Wed Jul 2 07:03:53 2008 -0700 |
| |
| Change the temp map to ROM to align addresses to page size. |
| |
| With a page size of BOOKE_PAGESZ_16M, both the real and effective |
| addresses must be multiples of 16MB. The hardware silently truncates |
| them so the code happens to work. This patch clarifies the situation |
| by establishing addresses that the hardware doesn't need to truncate. |
| |
| Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 06b4186c10204b6683edb047ac5f506fb0ce0937 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jun 17 17:45:22 2008 -0500 |
| |
| mpc85xx: use IS_E_PROCESSOR macro |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Jun 16 15:55:53 2008 -0500 |
| |
| fdt: add crypto node handling for MPC8{3, 5}xxE processors |
| |
| Delete the crypto node if not on an E-processor. If on 8360 or 834x family, |
| check rev and up-rev crypto node (to SEC rev. 2.4 property values) |
| if on an 'EA' processor, e.g. MPC8349EA. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 85e5808e8ea9f77da5219f23394112f0b424fa5e |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Fri Jul 11 15:10:11 2008 -0400 |
| |
| ARM DaVinci: Remove extern phy_t declaration by moving code to proper place |
| |
| ARM DaVinci: Remove extern phy_t declaration by moving |
| code to proper place. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Fri Jul 11 15:10:10 2008 -0400 |
| |
| ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init() |
| |
| ARM DaVinci: Remove duplicate definitions of MACH_TYPE |
| and prototype of i2c_init(). |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit 348753d416cd2c9e7ec6520a544c8f33cf02a560 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jul 14 14:03:02 2008 -0500 |
| |
| Fix some more printf() format problems. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 45b16d22c64674ccd8c4637456a987463609141c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 22:38:42 2008 +0200 |
| |
| Fix coding style; make code better parsable by external tools |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b880cbf207b1c109d3a661417a8feddcbd729a9d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 21:19:08 2008 +0200 |
| |
| cpu/i386/serial.c: Fix syntax errors |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e2d45e6f4d9919e1afeac5e09557b2252832fccf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 20:41:35 2008 +0200 |
| |
| elppc board: Coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 82b24a8a505fc81466484b3c55b574ee0b4205bc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 20:40:22 2008 +0200 |
| |
| elppc board: fix syntax error. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0fe340585a6a48bd392d315b0dd84d068b1c3790 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 20:38:26 2008 +0200 |
| |
| EB+MCF-EV123 board: fix coding style (alingment) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6841785a0bb0f38175456a923edd634fb7dd6947 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 20:36:44 2008 +0200 |
| |
| EB+MCF-EV123 board: fix syntx error |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jul 7 18:02:08 2008 -0500 |
| |
| Remove LBC_CACHE_BASE from 8544 DS |
| |
| The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping |
| space for some anyway, we were allowing speculative loads into unmapped space, |
| which would cause an exception (annoying, even if ultimately harmless). |
| Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the |
| problem. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 15:19:07 2008 +0200 |
| |
| Code cleanup: fix old style assignment ambiguities like "=-" etc. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d7854223c5c85b5849fbf422cc8ac0efef461c37 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 15:10:53 2008 +0200 |
| |
| AmigaOneG3SE: remove dead and incomplete files |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b64f190b7a34224df09b559ca111eb1b733f00ad |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 14 15:06:35 2008 +0200 |
| |
| Fix printf() format issues with sizeof_t types by using %zu |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f354b73e16a86f9e9085471a830605f74f84ea5d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Jul 14 14:11:45 2008 +0200 |
| |
| vsprintf: add z and t options |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 25dbe98abb686d8210e1731fba85ced7d3ce874c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jul 13 23:07:35 2008 +0200 |
| |
| Fix some more printf() format issues. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d5996dd555edf52721b7691a4c59de016251ed39 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jul 13 19:51:00 2008 +0200 |
| |
| Fix some more printf() format problems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0f9d5f6d6e814907794995c6a22af752040c35d9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jul 13 19:48:26 2008 +0200 |
| |
| ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Sat Jul 12 17:31:36 2008 +0200 |
| |
| Fix bug in Lime video driver |
| |
| We need to wait while drawing engine clears frame |
| buffer before any further software accesses to frame |
| buffer will be initiated. Otherwise software drawn |
| parts could be partially destroyed by the drawing |
| engine or even GDC chip freeze could occur (as |
| observed on socrates board). |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Jul 12 14:36:34 2008 +0200 |
| |
| Fix some more printf() format issues. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 18c8a28aad49803780bd8d52432ded528e37e701 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 11 15:11:57 2008 +0200 |
| |
| hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722 |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 11 11:50:53 2008 +0200 |
| |
| hwmon: Cleaning hwmon devices |
| |
| Clean Makefile |
| Move device specific values to driver for better reading |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit c78fce699c7ff467ecd841da6a79f065180bf578 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 11 10:43:13 2008 +0200 |
| |
| FIS: repare incorrect return value with ramdisk handling |
| |
| Microblaze and PowerPC use boot_get_ramdisk for loading |
| ramdisk to memory with checking return value. |
| Return 0 means success. Return 1 means failed. |
| Here is correspond part of code from bootm.c which check |
| return code. |
| |
| ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC, |
| &rd_data_start, &rd_data_end); |
| if (ret) |
| goto error; |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 11 10:10:32 2008 +0200 |
| |
| microblaze: Remove useless ancient headers |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 53ea981c3124b13c137c2d10e975b7c6672266e0 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 11 10:10:31 2008 +0200 |
| |
| microblaze: Clean uartlite driver |
| |
| Redesign uartlite driver to in_be32 and out_be32 macros |
| Fix missing header in io.h |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit dbf3dfb386a2d5d2381814e39985ab2e21894550 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Fri Jul 11 02:39:14 2008 +0200 |
| |
| Enable passing of ATAGs required by latest Linux kernel. |
| |
| commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Fri Jul 11 10:24:15 2008 -0400 |
| |
| Fix integer overflow warning in calc_divisor() |
| |
| which happened when rounding the serial port clock divisor |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit 6b760189d77f001684e3160b355c185ca3804961 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Fri Jul 11 01:09:59 2008 +0200 |
| |
| Fix build time warnings in function mmc_decode_csd() |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit c15947d6ce0d59925c97fdfac692476af6e262d0 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Thu Jul 10 10:46:33 2008 -0400 |
| |
| ARM: Fix for broken compilation when defining CONFIG_CMD_ELF |
| |
| caused by missing dcache status/enable/disable functions. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| |
| commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 10 13:53:31 2008 +0200 |
| |
| ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards |
| |
| This patch removes some ft_board_setup() functions from some 4xx boards. |
| This can be done since we now have a default weak implementation for this |
| in cpu/ppc4xx/fdt.c. Only board in need for a different/custom |
| implementation like canyonlands need their own version. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d39a089f8bc960ba9ae6a08fda5582b578620cc1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jul 13 14:58:16 2008 +0200 |
| |
| Add last known maintainer for orphaned boards; reformat. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu Jul 10 13:16:04 2008 +0200 |
| |
| Remove kharris@nexus-tech.net from MAINTAINERS |
| |
| Mail to kharris@nexus-tech.net bounces because the user doesn't exist |
| anymore. You can't be a maintainer without a valid e-mail address, so |
| move all boards that used to be maintained by Kyle Harris to the |
| "orphaned" list. |
| |
| Currently, only PowerPC has a list of orphaned boards, so this patch |
| creates one for ARM as well. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 17bd17071463b0cde391ac4a0863d600474b4ea1 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Jul 10 01:15:10 2008 +0200 |
| |
| at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260 |
| |
| On the at91sam9260ep development board there is an EEPROM |
| connected to the TWI interface (PA23, PA24 Peripheral A |
| multiplexing), so we cannot use these pins as ETX2, ETX3. |
| This patch configures PA10, PA11 pins for ETX2, ETX3 |
| instead of PA23, PA24 pins. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de> |
| |
| commit f889265753ddf4465d9d580827bb9289bfac55d6 |
| Author: Kenneth Johansson <kenneth@southpole.se> |
| Date: Sat Jul 12 13:18:34 2008 -0600 |
| |
| fix DIU for small screens |
| |
| The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values |
| so it was not possible to set a slow pixel clock and thus prevented |
| display on small screens. |
| |
| Signed-off-by: Kenneth Johansson <kenneth@southpole.se> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit b60b8573875e650e4c69be667bfc88d3ed474a7c |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Fri Jul 11 14:44:09 2008 -0600 |
| |
| ADS5121 cleanup compile warnings |
| |
| board/ads5121/iopin.c |
| Replace bit fields in struct iopin_t with a single |
| field and intialize it via plain old macros. |
| This fixes the type pun warnings and makes the code |
| more readable. |
| |
| board/ads5121/ads5121.c |
| Add include iopin.h to ads5121.c for the iopin_initialize |
| prototype. |
| |
| Add an extern void ads5121_diu_init(void) |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit bde63587622c4b830a27d1ddf7265843de9e994f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jul 11 22:56:11 2008 +0200 |
| |
| Fix some more printf() format issues. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jul 11 22:55:31 2008 +0200 |
| |
| Fixed some out-of-tree build issues |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 9 16:20:23 2008 -0500 |
| |
| ColdFire: Fix FB CS not setup properly for Mcf5282 |
| |
| Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If |
| CFG_CSn_RO is defined as 0, the chipselect will not |
| be assigned. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 9 15:47:27 2008 -0500 |
| |
| ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC |
| |
| Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time |
| clock module in cpu/<cf arch>/cpu_init.c |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f94945b517f10e01927101679c62361e03d4e837 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 9 15:25:01 2008 -0500 |
| |
| ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 9 15:21:44 2008 -0500 |
| |
| Fix compile error caused by missing timer function |
| |
| Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c37ea031175b807c54e6bad9b270e9bede6c0078 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jul 9 15:14:25 2008 -0500 |
| |
| Fix compile error caused by incorrect function return type |
| |
| Rename int mii_init(void) to void mii_init(void) |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ab4860b255239dbaecccdd002c8d11f4ef54dd75 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jun 18 19:27:23 2008 -0500 |
| |
| ColdFire: Fix power up issue for MCF5235 |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jun 18 19:19:07 2008 -0500 |
| |
| ColdFire: Fix compiling error for MCF5275 |
| |
| The compiling error was caused by missing a closed parentheses |
| in speed.c |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jun 18 19:14:01 2008 -0500 |
| |
| ColdFire: Fix timer issue for MCF5272 |
| |
| The timer was assigned to wrong timer memory mapped which |
| caused udelay() and timer() not working properly. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jun 18 19:12:13 2008 -0500 |
| |
| ColdFire: Change invalid JMP to BRA caught by new v4e toolchain |
| |
| Signed-off-by: Kurt Mahan <kmahan@freescale.com> |
| |
| commit 8371dc2066136be21e10b7b9293e469297d77298 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jun 18 19:05:23 2008 -0500 |
| |
| ColdFire: Add -got=single param for new linux v4e toolchains |
| |
| Signed-off-by: Kurt Mahan <kmahan@freescale.com> |
| |
| commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jun 18 13:21:19 2008 -0500 |
| |
| ColdFire: Fix code flash configuration for M547x/M548x boards |
| |
| Signed-off-by: Kurt Mahan <kmahan@freescale.com> |
| |
| commit 6e37091afc07fdcc15590093fd066b0cb7399f85 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jun 24 12:12:16 2008 -0500 |
| |
| ColdFire: Fix warning messages by passing correct data type in board.c |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 81cc32322acb1b3225ee45606ced48e2a14824dc |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu May 29 12:21:54 2008 -0500 |
| |
| ColdFire: Fix UART baudrate formula |
| |
| The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32" |
| can generate the wrong divisor due to integer division truncation. |
| Round the calculated divisor value by adding 1/2 the baudrate |
| before dividing by the baudrate. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit b578fb471444cbd7db1285701ba51343baaf73fb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 10 11:38:26 2008 +0200 |
| |
| ppc4xx: Fix include sequence in 4xx_pcie.c |
| |
| This patch now moves common.h to the top of the inlcude list. This |
| is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that |
| the phys_size_t/phys_addr_t are defined to the correct size in this |
| driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 11 13:10:56 2008 +0200 |
| |
| ppc4xx: Fix compile warning in 44x_spd_ddr2.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6bd9138498c2e4f4f09190108b99157d1b2140b5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 11 11:40:13 2008 +0200 |
| |
| ppc4xx: Fix small korat merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1d0554736a0a1dd59718acda660871ce56b69e18 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 11 11:34:52 2008 +0200 |
| |
| ppc4xx: Some Rewood cleanups (coding style, leading white spaces) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3a82113ed5934d498f25080441a8261fc9454b15 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 10 16:37:09 2008 +0200 |
| |
| ppc4xx: Add 460SX UIC defines |
| |
| Only the really needed ones are added (cascading and EMAC/MAL). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 26173fc6f60521c2a8072f652f863617fc11ba9a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 30 14:11:07 2008 +0200 |
| |
| ppc4xx: Continue cleanup of ppc440.h |
| |
| This patch continues the ppc440.h cleanup by removing some of the unused |
| defines. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d9056b7913ed6a228d2f33671d916efedee541dd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 30 14:05:05 2008 +0200 |
| |
| ppc4xx: Cleanup Katmai & Yucca PCIe register usage |
| |
| This patch cleans up the 440SPe PCIe register usage. Now only defines |
| from the include/asm-ppc/4xx_pcie.h are used. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5de851403b01489b493fa83137ad990b8ce60d1c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jun 26 17:36:39 2008 +0200 |
| |
| ppc4xx: Rework 440GX UIC handling |
| |
| This patch reworks the 440GX interrupt handling so that the common 4xx |
| code can be used. The 440GX is an exception to all other 4xx variants |
| by having the cascading interrupt vectors not on UIC0 but on a special |
| UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references |
| the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt |
| handling is simpler without any 440GX special cases. |
| |
| Also some additional cleanup to cpu/ppc4xx/interrupt.c is done. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d1631fe1a05b063ccaf62ea892a8887b829847d1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jun 26 13:40:57 2008 +0200 |
| |
| ppc4xx: Consolidate PPC4xx UIC defines |
| |
| This 2nd patch now removes all UIC mask bit definition. They should be |
| generated from the vectors by using the UIC_MASK() macro from now on. |
| This way only the vectors need to get defined for new PPC's. |
| |
| Also only the really used interrupt vectors are now defined. This makes |
| definitions for new PPC versions easier and less error prone. |
| |
| Another part of this patch is that the 4xx emac driver got a little |
| cleanup, since now the usage of the interrupts is clearer. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4fb25a3db3b3839094aa9ab748efd7a95924690b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jun 25 10:59:22 2008 +0200 |
| |
| ppc4xx: Consolidate PPC4xx UIC defines |
| |
| This patch is the first step to consolidate the UIC related defines in the |
| 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to |
| asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next |
| steps. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7ee2619c20ccecd57966d74d844e6329e141261c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 24 17:18:50 2008 +0200 |
| |
| ppc4xx: Consolidate PPC4xx EBC defines |
| |
| This patch removes all EBC related defines from the PPC4xx headers |
| ppc405.h and ppc440.h and introduces a new header |
| |
| include/asm-ppc/ppc4xx-ebc.h |
| |
| with all those defines. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e321801bed5a6d896d298c00fd20046f039d5d66 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 10 13:52:44 2008 +0200 |
| |
| ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards |
| |
| This patch removes some ft_board_setup() functions from some 4xx boards. |
| This can be done since we now have a default weak implementation for this |
| in cpu/ppc4xx/fdt.c. Only board in need for a different/custom |
| implementation like canyonlands need their own version. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 08250eb2edbd96514d049602d9e134110ac3185f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 10 15:32:32 2008 +0200 |
| |
| ppc4xx: Fix merge problems in 44x_spd_ddr2.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Tue Jul 8 08:35:00 2008 -0700 |
| |
| ppc4xx: Add MII mode support to the EMAC RGMII Bridge |
| |
| This patch adds support for placing the RGMII bridge on the |
| PPC405EX(r) into MII/GMII mode and allows a board-specific |
| configuration to specify the bridge mode at compile-time. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2e2050842e731c823ce8d41fb0c15579eb70ced9 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Wed Jul 9 16:46:35 2008 -0700 |
| |
| ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller |
| |
| This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM |
| controller registers (MODT and INITPLR) used by the |
| PowerPC405EX(r). The MMODE and MEMODE registers are unified with their |
| peer values used for the INITPLR MR and EMR registers, |
| respectively. Finally, a spelling typo is correct (MANUEL to MANUAL). |
| |
| With these mnemonics in place, the CFG_SDRAM0_* magic numbers for |
| Kilauea are replaced by equivalent mnemonics to make it easier to |
| compare and contrast other 405EX(r)-based boards (e.g. during board |
| bring-up). |
| |
| Finally, unified the SDRAM controller register dump routine such that |
| it can be used across all processor variants that utilize the IBM DDR2 |
| SDRAM controller core. It produces output of the form: |
| |
| PPC4xx IBM DDR2 Register Dump: |
| ... |
| SDRAM_MB0CF[40] = 0x00006701 |
| ... |
| |
| which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included |
| since it is not uncommon that the DCR values in header files get mixed |
| up and it helps to validate, at a glance, they match what is printed |
| in the user manual. |
| |
| Tested on: |
| AMCC Kilauea/Haleakala: |
| - NFS Linux Boot: PASSED |
| - NAND Linux Boot: PASSED |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ad7382d828982e9c1bafc4313ef1b666f6145f58 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Wed Jul 9 16:31:59 2008 -0700 |
| |
| ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics |
| |
| Add additional DDR2 SDRAM memory controller DCR mneomnics, condition |
| revision ID DCR based on 405EX, and add field mnemonics for bus error |
| status and ECC error status registers. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Wed Jul 9 16:31:36 2008 -0700 |
| |
| ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r) |
| |
| This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5b457d00730d4aa0c6450d21a9104723e606fb98 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Wed Jul 9 11:55:46 2008 -0700 |
| |
| PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r) |
| |
| While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM |
| controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in |
| the 405EX(r), SDRAM_MCSTAT has a different DCR value. |
| |
| Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF |
| which causes SDRAM initialization to periodically fail since it can |
| prematurely indicate SDRAM ready status. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d |
| Author: Feng Kan <fkan@amcc.com> |
| Date: Tue Jul 8 22:48:42 2008 -0700 |
| |
| ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board. |
| |
| Add AMCC Redwood reference board that uses the latest |
| PPC 464 CPU processor combined with a rich mix of peripheral |
| controllers. The board will support PCIe, mutiple Gig ethernet |
| ports, advanced hardware RAID assistance and IEEE 1588. |
| |
| Signed-off-by: Feng Kan <fkan@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89 |
| Author: Feng Kan <fkan@amcc.com> |
| Date: Tue Jul 8 22:48:07 2008 -0700 |
| |
| ppc4xx: Add initial 460SX reference board (redwood) config file and defines. |
| |
| Signed-off-by: Feng Kan <fkan@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d30793685efcada183891c78fc892e6c9ba50c7 |
| Author: Feng Kan <fkan@amcc.com> |
| Date: Tue Jul 8 22:47:31 2008 -0700 |
| |
| ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory. |
| |
| Signed-off-by: Feng Kan <fkan@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jul 11 01:16:00 2008 +0200 |
| |
| Fix some more print() format errors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fdd70d1921b87287d9a99d1be99bc35226c2b412 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Jul 10 20:57:54 2008 +0200 |
| |
| MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c |
| Author: Sergey Lapin <slapin@ossfans.org> |
| Date: Thu Jun 5 11:06:29 2008 +0400 |
| |
| DataFlash AT45DB021 support |
| |
| Some boards based on AT91SAM926X-EK use smaller DF chips to keep |
| bootstrap, u-boot and its environment, using NAND or other external |
| storage for kernel and rootfs. This patch adds support for |
| small 1024x263 chip. |
| |
| Signed-off-by: Sergey Lapin <slapin@ossfans.org> |
| |
| commit 4109df6f75fc00ab7da56d286ba50149a0d16a69 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Jul 10 14:00:15 2008 -0500 |
| |
| silence misc printf formatting compiler warnings |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3 |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Thu Jul 10 14:47:09 2008 +0200 |
| |
| USB: shutdown USB before booting |
| |
| This patch fixes a potentially serious issue related to USB which was |
| discouvered by Martin Krause <martin.krause@tqs.de> and fixed for |
| ARM920T. Martin wrote: |
| |
| Turn off USB to prevent the host controller from writing to the |
| SDRAM while Linux is booting. This could happen, because the HCCA |
| (Host Controller Communication Area) lies within the SDRAM and the |
| host controller writes continously to this area (as busmaster!), for |
| example to increase the HccaFrameNumber variable, which happens |
| every 1 ms. |
| |
| This is a slightly modified version of the patch in order to shutdown |
| USB when booting on all architectures. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8 |
| Author: Martha Marx <mmarx@silicontkx.com> |
| Date: Thu May 29 14:23:25 2008 -0400 |
| |
| Configuration changes for ADS5121 Rev 3 |
| |
| ADS5121 Rev 3 board is now the default config |
| |
| config targets are now |
| |
| ads5121_config |
| Rev 3 board with |
| PCI |
| M41T62 on board RTC |
| 512MB DRAM |
| |
| ads5121_rev2_config |
| Rev 2 board with |
| No PCI |
| 256MB DRAM |
| |
| Signed-off-by: Martha Marx <mmarx@silicontkx.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615 |
| Author: Martha Marx <mmarx@silicontkx.com> |
| Date: Thu May 29 15:37:21 2008 -0400 |
| |
| Consolidate ADS5121 IO Pin configuration |
| |
| Consolidate ADS5121 IO Pin configuration to one file |
| board/ads5121/iopin.c. |
| |
| Remove pin config from cpu/mpc512x/fec.c |
| |
| Signed-off-by: Martha Marx <mmarx@silicontkx.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7 |
| Author: Christian Eggers <christian@p2400.wgnetz.xx> |
| Date: Fri Jun 27 19:46:51 2008 +0200 |
| |
| Fix "usb part" command |
| |
| Only print partition for selected device if user supplied the <dev> |
| arg with the "usb part [dev]" command. |
| |
| Signed-off-by: Christian Eggers <ceggers@gmx.de> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit cc83b27217f7380041fea386ddb6d6d9b261617d |
| Author: Harald Welte <laforge@gnumonks.org> |
| Date: Mon Jul 7 00:58:05 2008 +0800 |
| |
| fix USB devices with multiple configurations |
| |
| This patch fixes bugs in usbdcore*.c related to the use of devices |
| with multiple configurations. |
| |
| The original code made mistakes about the meaning of configuration value and |
| configuration index, and the resulting off-by-one errors resulted in: |
| |
| * SET_CONFIGURATION always selected the first configuration, no matter what |
| wValue is being passed. |
| * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first |
| configuration (index 0). |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 06c53beae1a726e707971c555613f09b270a2461 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 10 13:16:09 2008 +0200 |
| |
| Fix some more print() format errors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d4b5f3fa001228d76e2c3380cedadf804b802c2a |
| Author: Christian Eggers <christian@p2400.wgnetz.xx> |
| Date: Fri Jun 27 19:46:51 2008 +0200 |
| |
| Fix "usb part" command |
| |
| Only print partition for selected device if user supplied the <dev> |
| arg with the "usb part [dev]" command. |
| |
| Signed-off-by: Christian Eggers <ceggers@gmx.de> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit e73b5212e0463a3db0af0a5c95c75bfb762ca973 |
| Author: Harald Welte <laforge@gnumonks.org> |
| Date: Mon Jul 7 00:58:05 2008 +0800 |
| |
| fix USB devices with multiple configurations |
| |
| This patch fixes bugs in usbdcore*.c related to the use of devices |
| with multiple configurations. |
| |
| The original code made mistakes about the meaning of configuration value and |
| configuration index, and the resulting off-by-one errors resulted in: |
| |
| * SET_CONFIGURATION always selected the first configuration, no matter what |
| wValue is being passed. |
| * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first |
| configuration (index 0). |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit e870690bdca154943ecadd5212d2d59c1b9d391b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 10 10:10:54 2008 +0200 |
| |
| MTD/NAND: Fix printf format warning in nand code |
| |
| This patch fixes NAND related printf format warning. Those warnings are |
| now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd |
| [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is |
| really helpful. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 10943c9afa25694bd9999461f4e9e50ce22fff2b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 10 10:00:45 2008 +0200 |
| |
| rtc: Fix printf format warning in m41t60.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 8 12:01:47 2008 +0200 |
| |
| pci: Move PCI device configuration check into a separate weak function |
| |
| This patch moves the check, if a device should be skipped in PCI PNP |
| configuration into the function pci_skip_dev(). This function is defined |
| as weak so that it can be overwritten by a platform specific one if |
| needed. The check if the device should get printed in the PCI summary upon |
| bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function |
| pci_print_dev() which is also defined as weak too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b002144e1dc21374b1ef5281fe6b5d014af96650 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 10 09:58:06 2008 +0200 |
| |
| ppc4xx: Fix printf format warnings now visible with the updated format check |
| |
| This patch fixes ppc4xx related printf format warning. Those warnings are |
| now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd |
| [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is |
| really helpful. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 9 17:33:57 2008 +0200 |
| |
| ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai |
| |
| Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM. |
| To support such configurations, we "only" map the first 2GB via the TLB's. We |
| need some free virtual address space for the remaining peripherals like, SoC |
| devices, FLASH etc. |
| |
| Note that ECC is currently not supported on configurations with more than 2GB |
| SDRAM. This is because we only map the first 2GB on such systems, and therefore |
| the ECC parity byte of the remaining area can't be written. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cf1c2ed91df26903b956948f37f82de9e1158a89 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Sat Jun 14 17:02:49 2008 -0400 |
| |
| ppc4xx: Remove implementation of testdram() from Korat board support |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Sat Jun 14 16:53:02 2008 -0400 |
| |
| ppc4xx: Update and add FDT to Korat board support |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4188f0491886b3b486164e819c0a83fdb97efd7d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 10 01:13:30 2008 +0200 |
| |
| Minor coding style cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8915f1189c1d29d8be7f4de325702d90a8988219 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Wed Jul 9 17:50:45 2008 -0400 |
| |
| e1000: add support for 82545GM 64bit PCI-X copper variant |
| |
| This PCI-X e1000 variant works by just adding in the correct |
| PCI IDs in the appropriate places. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Jul 9 12:34:11 2008 +0000 |
| |
| SPARC: Build error fix |
| |
| (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378) |
| |
| This patch makes SPARC targets build again. It is caused by |
| phys_addr_t and phys_size_t being defined in the wrong header |
| file. include/lmb.h need those typedefs to build. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 11ccc33fa21acce108f6b4a6936e3271af904c64 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Wed Jul 9 08:17:15 2008 +0200 |
| |
| Many spelling fixes in README. |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit dbab0691d2533560f7e91b92ae844046a9ad1df3 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Wed Jul 9 08:17:06 2008 +0200 |
| |
| Minor spelling fix in comment. |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Tue Jul 8 14:54:58 2008 -0400 |
| |
| Round the serial port clock divisor value returned by calc_divisor() |
| |
| Round the serial port clock divisor value returned by |
| calc_divisor(). |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Signed-off-by: John Roberts <john.roberts@pwav.com> |
| |
| commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Jul 9 17:47:52 2008 -0500 |
| |
| NAND: ifdef-protect most of nand.h when using legacy NAND. |
| |
| Some macros such as NAND_CTL_SETALE conflict between current and legacy |
| NAND, being defined by the subsystem in the former case and the board |
| config file in the latter. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Tue Jul 8 11:02:05 2008 -0400 |
| |
| ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS) |
| |
| ARM: Fix for incorrect version of patch applied when |
| adding support for the Lyrtech SFF-SDR board. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com> |
| |
| commit 47042b363ee5022b8180c65d3f4558e7972c79cd |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Tue Jul 8 09:08:40 2008 +0900 |
| |
| Remove useless print message at apollon |
| |
| Remove useless print message at apollon |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 98874ff329d4a5b32c467b43f6e966e1aa68479f |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jul 7 14:24:39 2008 -0500 |
| |
| Fix LMB type issues |
| |
| The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple |
| of casting problems in the bootm code that called the LMB functions. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jul 7 09:39:06 2008 -0500 |
| |
| Fix compiler warnings |
| |
| gcc-4.3.x generates the following: |
| |
| bootm.c: In function 'do_bootm_linux': |
| bootm.c:208: warning: cast from pointer to integer of different size |
| bootm.c:215: warning: cast from pointer to integer of different size |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698 |
| Author: Harald Welte <laforge@gnumonks.org> |
| Date: Mon Jul 7 15:40:39 2008 +0800 |
| |
| Remove code duplication for setting the default environment |
| |
| common/env_common.c (default_env): new function that resets the environment to |
| the default value |
| common/env_common.c (env_relocate): use default_env instead of own copy |
| common/env_nand.c (env_relocate_spec): use default_env instead of own copy |
| include/environment.h: added default_env prototype |
| |
| Signed-off-by: Werner Almesberger <werner@openmoko.org> |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit 99c2b434d37863df5dda5207a53760c6506fc2be |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Sun Jun 22 16:13:46 2008 +0200 |
| |
| NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c. |
| |
| The writeenv() and readenv() calls introduced by the recently added bad block |
| management for environment variables were missing casts therefore producing |
| compile time warnings. |
| While at it fixing some typo in a comment and indentation. |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Fri Jun 20 12:38:57 2008 -0500 |
| |
| NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution. |
| |
| This is particularly problematic now that non-NAND-specific code is |
| including <nand.h>, and thus all debugging code is being compiled |
| regardless of whether it was requested, as reported by Scott McNutt |
| <smcnutt@psyent.com>. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu Jun 12 19:27:58 2008 +0200 |
| |
| mmc: Move atmel_mci driver into drivers/mmc |
| |
| This makes it easier to use the driver on other platforms. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu Jun 12 19:27:57 2008 +0200 |
| |
| avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver |
| |
| After we move the atmel_mci driver into drivers/mmc, we can't select |
| it with CONFIG_MMC anymore. Introduce a new symbol specifically for |
| this driver so that there's no ambiguity. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 5ce13051a48c62bda9723df3b4778c492fb47f36 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu Jun 12 19:27:56 2008 +0200 |
| |
| Create drivers/mmc subdirectory |
| |
| In order to consolidate more of the various MMC drivers around the |
| tree, we must first have a common place to put them. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit b502611b51f02718c2d1117d4981dabceb5af6de |
| Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> |
| Date: Sun Jul 6 12:30:09 2008 +0200 |
| |
| Change env_get_char from a global function ptr to a function |
| |
| This avoids an early global data reference. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit 27269417ade432189b234d9fbac98b54e37b978c |
| Author: Matvejchikov Ilya <matvejchikov@gmail.com> |
| Date: Sun Jul 6 13:57:58 2008 +0400 |
| |
| Some copy-n-paste fixes in printf usage |
| |
| Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> |
| |
| commit 0e6989b9faf1588e8723535539e88a0df3c71356 |
| Author: Matvejchikov Ilya <matvejchikov@gmail.com> |
| Date: Sun Jul 6 13:57:00 2008 +0400 |
| |
| FDT memory and pci node fixes for MPC8260ADS |
| |
| Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> |
| |
| commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd |
| Author: Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| Date: Mon Jul 7 06:41:14 2008 -0700 |
| |
| Fix printf errors. |
| |
| The compiler will help find mismatches between printf formats and |
| arguments if you let it. This patch adds the necessary attributes to |
| declarations in include/common.h, then begins to correct the resulting |
| compiler warnings. Some of these were bugs, e.g., "$d" instead of |
| "%d" and incorrect arguments. Others were just annoying, like |
| int-long mismatches on a system where both are 32 bits. It's worth |
| fixing the annoying errors to catch the real ones. |
| |
| Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| |
| commit 417faf285b2527acb2de24c5cd3e2621d385408c |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jul 9 11:09:41 2008 -0500 |
| |
| Allow print_size to print in GB |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit e7c374529c87525c9aa463e0557c287887ae4e9e |
| Author: Jason McMullan <mcmullan@netapp.com> |
| Date: Sun Jun 8 23:56:00 2008 -0400 |
| |
| mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment |
| |
| Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if |
| they are set in the U-Boot environment. |
| |
| Signed-off-by: Jason McMullan <mcmullan@netapp.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 0192d7d56e9320819dea262f49789ae18fdd2c72 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 8 12:57:14 2008 +0200 |
| |
| jedec_flash: Fix AM29DL800BB device ID |
| |
| As pointed out by Jerry Hicks, this patch corrects the device ID of |
| the Spansion AM29DL800BB NOR device. Verified against latest Spansion |
| datasheet (rev C4 from Dezember 2006). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Mon Jul 7 11:22:37 2008 +0900 |
| |
| sh: Fix compile error sh7763rdp board |
| |
| Disable SH ether driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jul 8 12:03:24 2008 +0900 |
| |
| sh: Fix SH-boards compile error |
| |
| By Cleanup out-or-tree building for some boards (.depend) |
| (commit:c8a3b109f07f02342d097b30908965f7261d9f15) |
| because filse ware changed, some SH-boards have compile error. |
| I revised this problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 3473ab737282b08ad61841fcbb14c4d264a93a8e |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Tue May 13 11:50:36 2008 +0800 |
| |
| Feed the watchdog in u-boot for 8610 board. |
| |
| The watchdog on 8610 board is enabled by setting sw[6] |
| to on. Once enabled, the watchdog can not be disabled |
| by software. So feed the dog in u-boot is necessary for |
| normal operation. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 63676841ca2d603b13765f3f7b72ff1a61c23f90 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Wed Jun 18 12:10:33 2008 -0400 |
| |
| Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c. |
| |
| Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c. |
| |
| Remove duplicate code in a if/else block in |
| cpu/arm926ejs/davinci/lxt972.c. |
| Fixed style issues. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit fec61431a003f5778bafa2624073a571af8bec9f |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Wed Jun 18 12:10:31 2008 -0400 |
| |
| Remove duplicate definitions in include/lxt971a.h. |
| |
| Remove duplicate definitions in include/lxt971a.h. |
| |
| Remove duplicate registers and bits definitions in |
| include/lxt971a.h for standard MII registers, and |
| use values in include/miiphy.h instead. |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 9751ee0990f467941da0b095a4e995f863672d7a |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Wed Jun 11 21:05:00 2008 +0900 |
| |
| net: sh: Renesas SH7763 Ethernet device support |
| |
| Renesas SH7763 has 2 channel Ethernet device. |
| This is 10/100/1000 Base support. |
| But this patch check 10/100 Base only. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:28:05 2008 +0900 |
| |
| sh: Update Renesas R2DPlus board |
| |
| New NOR Flash board support and remove old type flash board config. |
| And Remove network setting from config file. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:28:01 2008 +0900 |
| |
| sh: Update Renesas R7780MP board |
| |
| New NOR Flash board support and remove network setting from config file. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c001cd604e9f133743effbddb1c215b48e761c5a |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:27:56 2008 +0900 |
| |
| sh: Update Renesas Migo-R board |
| |
| Remove network setting from config file. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:27:52 2008 +0900 |
| |
| sh: Update Hitachi MS7722SE board |
| |
| Remove network setting from config file. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 26209e48e8791670c93108029a5c31a30016c6df |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:27:48 2008 +0900 |
| |
| sh: Cleanup source code of SH7763RDP |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 5cd5b2c96ef0025762931349d350287aec03ab47 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:27:44 2008 +0900 |
| |
| sh: Cleanup source code of R2DPlus |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:27:41 2008 +0900 |
| |
| sh: Cleanup source code of R7780MP |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:27:38 2008 +0900 |
| |
| sh: Cleanup source code of MS7722SE |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Tue Jun 17 16:27:34 2008 +0900 |
| |
| sh: Cleanup source code of MS7720SE |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 3ab4827cbe409488ebea1a2ee5094783f2672214 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Jul 7 00:45:03 2008 +0200 |
| |
| SH: fix out of tree building |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9047bfa1e737d787be460387dd6f45737eeceb10 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Thu Jul 3 23:16:06 2008 +0900 |
| |
| net: smc911x: Fix typo |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| |
| commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Wed Jul 2 18:54:08 2008 +0200 |
| |
| update mvBL-M7 board config |
| |
| update mvBL-M7 config file to use UBOOT_VERSION and define |
| CONFIG_HIGH_BATS. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| |
| commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Mon Jun 30 17:45:01 2008 +0900 |
| |
| net: fix compile problem in smc911x driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 9fea65a6c469b1b474b27446feb58738baba2d31 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Jun 24 09:54:09 2008 +0200 |
| |
| ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405 |
| |
| This change helps with better handling with others |
| Xilinx based platform. |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jun 17 13:07:11 2008 +0900 |
| |
| net: ne2000: Move dev_addr variable from grobal to local. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jun 17 13:07:15 2008 +0900 |
| |
| net: ne2000: Fix compile error of NE2000 |
| |
| If enable DEBUG, can not compile ne2000 driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Mon Jun 23 22:57:27 2008 -0700 |
| |
| Add mechanisms for CPU and board-specific Ethernet initialization |
| |
| This patch is the first step in cleaning up net/eth.c, by moving Ethernet |
| initialization to CPU or board-specific code. Initial implementation is |
| only on the Freescale TSEC controller, but others will be added soon. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 7754f2be5d1835d263aad21b5a629526f3e680b0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jul 6 01:21:46 2008 +0200 |
| |
| include/sha256.h: fix file permissions. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d3bcdf838e2991d58571308fa6e04ca335bc06e8 |
| Author: Patrice Vilchez <patrice.vilchez@atmel.com> |
| Date: Tue May 27 11:15:29 2008 +0200 |
| |
| [AT91SAM9] Fix NAND FLASH timings |
| |
| Fix NAND FLASH timings for at91sam9x evaluation kits. |
| |
| New timings are based on application note |
| "NAND Flash Support on AT91SAM9 Microcontrollers" available at |
| http://atmel.com/dyn/resources/prod_documents/doc6255.pdf |
| |
| Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Acked-by: Stelian Pop <stelian@popies.net> |
| |
| commit 19bd688484322fe62d1a66c8299da6ff9e967ff9 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 22 00:15:40 2008 +0200 |
| |
| Fix boot from NOR due to incorrect reset delay. |
| |
| AT91 RSTC registers are battery-backuped, so their values |
| are not reset across power cycles. One of those registers, |
| the AT91_RSTC_MR register, is being modified by U-Boot, in |
| the ethernet initialisation routine, to generate a 500ms |
| user reset. |
| |
| Unfortunately, this value is not being restored afterwards, |
| causing subsequent resets to also last for 500ms. |
| |
| This long reset sequence causes problems (at least) in the |
| boot sequence from NOR: by the time the CPU tries to load |
| a program from the NOR flash, the latter is still in reset |
| and not yet available. |
| |
| Additionaly, this patch fixes a bug in the original code which |
| caused the reset delay to last for 2s instead of 500ms. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f492dd636fbbae529e17533995bc6e5813c007f6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jul 4 20:11:49 2008 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jul 4 20:07:35 2008 +0200 |
| |
| CCM/SCM boards: fix out of tree building |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ab4c3a490df9a964711556d2a05b0c787db45fde |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 3 23:22:27 2008 +0200 |
| |
| SCM board: fix build errors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a566466f17ba0e2d2b6c250e77da678fb932470d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 3 23:06:36 2008 +0200 |
| |
| IAD210 board: fix ``"ALIGN" redefined'' warning. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ad756314797c16fa5dca23e115aab881011f164f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 3 23:00:24 2008 +0200 |
| |
| CCM board: fix build errors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Wed Jul 2 18:54:08 2008 +0200 |
| |
| update mvBL-M7 board config |
| |
| update mvBL-M7 config file to use UBOOT_VERSION. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ced209c50e80c25f13c083099b05044048d21f4f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 3 22:39:21 2008 +0200 |
| |
| sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'" |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 3 22:34:08 2008 +0200 |
| |
| Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 730f298485984b011b6ee8f4acb511cb45a843dd |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 3 22:04:17 2008 +0200 |
| |
| lmb: fix "implicit declaration of function 'lmb_free'" warning |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 322ef5e28d2dc62571afc699b00add22a8e006e4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 2 23:53:23 2008 +0200 |
| |
| Cleanup: remove redundant deleting on *~ files |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c8a3b109f07f02342d097b30908965f7261d9f15 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 2 23:49:18 2008 +0200 |
| |
| Cleanup out-or-tree building for some boards (.depend) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 2 23:38:50 2008 +0200 |
| |
| Cleanup: fix out-of-tree building for some boards |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 461fa68d20861811487944d22291db5a13410e20 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 2 23:00:14 2008 +0200 |
| |
| Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5981ebd32017e062b08aa6747cf591276f2db779 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Jun 20 22:26:24 2008 +0200 |
| |
| fdt: Fix typo in variable name. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Thu Jun 19 11:11:19 2008 +0200 |
| |
| Add logos for RRvision board |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit ee4ae38342142237ca85913f88ee570c1eb5ca7c |
| Author: Esben Haabendal <EsbenHaabendal@gmail.com> |
| Date: Wed Jun 18 11:03:57 2008 +0200 |
| |
| mpc8260: add fdt_fixup_ethernet support |
| |
| Add support for updating mac-address and local-mac-address in fdt for |
| all MPC8260 targets. |
| |
| Signed-off-by: Esben Haabendal <eha@doredevelopment.dk> |
| |
| commit f6a69559d64498a04e1e0b087a9b920e5775f866 |
| Author: Steven A. Falco <sfalco@harris.com> |
| Date: Thu Jun 12 13:24:42 2008 -0400 |
| |
| cmd_nvedit.c: clean up syntax highlighting |
| |
| My text-editor (vim) has a bit of trouble syntax-highlighting the |
| cmd_nvedit.c file, because it apparently does not parse C |
| ifdef/else/endif. The following patch does not change the behavior of |
| the code at all, but does allow the editor to properly |
| syntax-highlight the file. |
| |
| Signed-off-by: Steve Falco <sfalco@harris.com> |
| |
| commit 75678c807a6272ecc5541eb32898c93887f08400 |
| Author: Steven A. Falco <sfalco@harris.com> |
| Date: Thu Jun 12 13:22:12 2008 -0400 |
| |
| Make setenv() return status |
| |
| Currently, the setenv function does not return an error code. |
| This patch allows to test for errors. |
| |
| Signed-off-by: Steve Falco <sfalco@harris.com> |
| |
| commit 4928e97c8531283ca9b368b7c29a8a12e726562a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jun 11 10:14:06 2008 -0500 |
| |
| PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops |
| |
| fls64, __ilog2_u64, ffs64 are variants that work on an u64, |
| and fls is used to implement them. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 83002a77cbdf383015ca384eff5fa31722d8e571 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Mon Jun 9 22:58:48 2008 +0200 |
| |
| i.MX31: Cleanup comments in lowlevel_init.S. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit f8cc312bbee69257d741dc9f4062f4a0f5adf609 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Jun 8 23:28:33 2008 -0700 |
| |
| Move conditional compilation of MPC8XXX SPI driver to Makefile |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d92ea21bafb674ee2bf27447970b047845e7b0a2 |
| Author: Juergen Kilb <J.Kilb@gmx.de> |
| Date: Sun Jun 8 17:59:53 2008 +0200 |
| |
| i.MX31: fixed CTRL-C detection |
| |
| The Register URXD contains status information in bits [15..8]. |
| With status bit 15 set, CTRL-C was reported as 0x8003 instead |
| of 0x03. Therefore CTRL-C was not detected. |
| To solve this, bits [15..8] were masked out now. |
| |
| Signed-off-by: Juergen Kilb <J.Kilb@gmx.de> |
| Acked-by: Felix Radensky <felix@embedded-sol.com> |
| |
| commit dd1c5523d6f44e842e69f2fcb50788c6060eab86 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 1 17:03:19 2008 +0200 |
| |
| ppc4xx: Fix 460EX/GT PCIe port initialization |
| |
| This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was |
| configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing |
| this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b571afde0295b007a45055ee49f8822c753a5651 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Jun 7 12:29:52 2008 +0200 |
| |
| add SHA256 support |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com> |
| |
| commit 3bab76a26e03df4ff81342fcc16393ce37d9766b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Jun 6 23:07:40 2008 +0200 |
| |
| Delay FIT format check on sector based devices |
| |
| Global FIT image operations like format check cannot be performed on |
| a first sector data, defer them to the point when whole FIT image was |
| uploaded to a system RAM. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com> |
| NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 9810263afec5ac5f38f92963bb3b6d799e4331d0 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Jun 3 17:38:19 2008 +0800 |
| |
| sata: wait for device updating signature to host |
| |
| The driver need wait for the device updating signature to host. |
| If we don't wait for it, the driver can not detect the device(disk) |
| when the system powers up. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 745d8a0d3cea82e6d1753e14afb4588c34761b15 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jun 28 14:56:17 2008 +0200 |
| |
| ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic |
| |
| This patch implements a fix provided by AMCC so that the lockup upon |
| simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur |
| anymore: |
| |
| Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2] |
| (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG, |
| USB 2.0 host and SATA. |
| |
| This errata is not officially available yet. I'll update the comment |
| to add the errata number later. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8b616edb118e37d05f6401389eaee1c636b22828 |
| Author: Stuart Wood <stuart.wood@labxtechnologies.com> |
| Date: Mon Jun 2 16:42:19 2008 -0400 |
| |
| serial_pl010.c: add watchdog support |
| |
| Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com> |
| |
| commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b |
| Author: Stuart Wood <stuart.wood@labxtechnologies.com> |
| Date: Mon Jun 2 16:40:08 2008 -0400 |
| |
| jffs2_1pass.c: add watchdog support |
| |
| Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com> |
| |
| commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89 |
| Author: Sascha Laue <sascha.laue@liebherr.com> |
| Date: Fri May 30 09:48:14 2008 +0200 |
| |
| Configure DSP POST; add watchdog reset to diag command |
| |
| Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> |
| |
| commit f13526517859bf6b573e23ff47199e107d1009b5 |
| Author: Tor Krill <tor@excito.com> |
| Date: Thu May 29 10:40:17 2008 +0200 |
| |
| Add sata sil3114 support |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| |
| commit e093a247628228100f405b6d7f6b1bfc16141938 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jun 28 23:34:37 2008 +0200 |
| |
| Coding Style Cleanup |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jun 28 23:16:01 2008 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c7f879ec2b389c4f2bf726b293bd516f4c692e03 |
| Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Date: Wed May 21 13:58:41 2008 -0400 |
| |
| ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS) |
| |
| This patch adds support for the Lyrtech SFF-SDR board, |
| based on the TI DaVinci architecture (ARM926EJS). |
| |
| Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> |
| Signed-off-by: Philip Balister <philip@balister.org> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 341188b9ccaa8d4462d772cc067aca8d7618633a |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu May 22 11:09:59 2008 +0200 |
| |
| MMC: Consolidate MMC/SD command definitions |
| |
| This moves the MMC and SD Card command definitions from |
| include/asm/arch/mmc.h into include/mmc.h. These definitions are |
| given by the MMC and SD Card standards, not by any particular |
| architecture. |
| |
| There's a lot more room for consolidation in the MMC drivers which |
| I'm hoping to get done eventually, but this patch is a start. |
| |
| Compile-tested for all avr32 boards as well as lpc2292sodimm and |
| lubbock. This should cover all three mmc drivers in the tree. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit fa60edfc4c952626e048c0e065f654b3c1822fa5 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Wed May 21 14:38:08 2008 +0900 |
| |
| Use better Ethernet timings for apollon board |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 41c5eaa7253ed82bbae1eda5667755872c615164 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jun 16 13:58:56 2008 -0500 |
| |
| Resize device tree to allow space for board changes and the chosen node |
| |
| Current code requires that a compiled device tree have space added to the end to |
| leave room for extra nodes added by board code (and the chosen node). This |
| requires that device tree creators anticipate how much space U-Boot will add to |
| the tree, which is absurd. Ideally, the code would resize and/or relocate the |
| tree when it needed more space, but this would require a systemic change to the |
| fdt code, which is non-trivial. Instead, we resize the tree inside |
| boot_relocate_fdt, reserving either the remainder of the bootmap (in the case |
| where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7570a9941fc565922078679a72d246fe208d696d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jun 16 13:58:55 2008 -0500 |
| |
| Fix an underflow bug in __lmb_alloc_base |
| |
| __lmb_alloc_base can underflow if it fails to find free space. This was fixed |
| in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch |
| merely updates __lmb_alloc_base to resemble the current version in Linux. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 63796c4e61b207d2e635729d41b7a7f7d188b03c |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jun 16 13:58:54 2008 -0500 |
| |
| Add lmb_free |
| |
| lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or |
| lmb_reserve to temporarily reserve some memory. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Jun 16 13:58:53 2008 -0500 |
| |
| Add ALIGN() macro |
| |
| ALIGN() returns the smallest aligned value greater than the passed |
| in address or size. Taken from Linux. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 24 17:15:22 2008 +0200 |
| |
| ppc4xx: Fix compilation problems with phys_size_t |
| |
| This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx |
| board specific files where it has been missing. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 28eab0d77352b84885f938759bf2612b7bf0bc44 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon May 19 12:26:38 2008 +0200 |
| |
| Conditionally add -fno-stack-protector to CFLAGS |
| |
| When compile-testing on powerpc, I get errors like this: |
| |
| net/nfs.c:422: undefined reference to `__stack_chk_fail_local' |
| |
| This seems to be because -fstack-protector is on by default, so |
| let's explicitly disable it on all architectures that support the |
| option. |
| |
| The Ubuntu toolchain is affected by this problem, and according to |
| Mike Frysinger, Gentoo has been running with SSP enabled for years. |
| More and more distros are turning SSP on by default, so this problem |
| is likely to get worse in the future. |
| |
| Also, powerpc just happens to be one of the arches I do |
| compile-testing on. There may be other arches affected by this too. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit dfd3be881c03a26e31f0dea4a42e76061fa610ac |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:52 2008 +0200 |
| |
| pcmcia/ti_pci1410a: Move compile condition to the Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:51 2008 +0200 |
| |
| pxa_pcmcia: Move compile condition to the Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c9eff32881fb429101c937cf8c268f1d42e5c2a9 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:50 2008 +0200 |
| |
| marabun_pcmcia: Move compile condition to the Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6a19c46cae43c16c528eddefae3db97134f1915d |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Mon Jun 23 13:25:34 2008 +0200 |
| |
| fix non-working mvBL-M7 |
| |
| Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 846f1574ddddeda2bc227655e687308695f41cdc |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Mon Jun 23 11:40:56 2008 +0200 |
| |
| fix system config overwrite @ MPC834x and MPC8313 |
| |
| During 83xx setup the "System I/O configuration register high" gets |
| overwritten with user defined value if CFG_SICRH is defined. |
| |
| Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH |
| must keep their reset value regardless of configuration. |
| |
| On my board (using RGMII) those bits are set after reset - yet it's |
| unclear where they come from. |
| |
| The patch keeps both bits on MPC834x and MPC8313. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 4890246a2c5df90a74e2941e3673a49bbd36aee9 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jun 17 17:45:27 2008 -0500 |
| |
| mpc83xx: move CPU_TYPE_ENTRY over to processor.h |
| |
| to avoid this: |
| |
| cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined |
| In file included from cpu.c:33: |
| /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 23 11:15:09 2008 +0200 |
| |
| ppc4xx: Fix problem in gpio_config() |
| |
| As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted |
| left by one. So the additional shift is bogus. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 40777812316fc252c941665c0f60c148fd79d50f |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Jun 20 22:24:05 2008 +0200 |
| |
| fdt: Fix typo in variable name. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 5f723a3b98c630bde33de74351f2121691fdef14 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri Jun 20 10:41:05 2008 +0200 |
| |
| avr32: Enable SPI flash support on ATNGW100 |
| |
| The ATNGW100 has 8MB DataFlash on board. Give users access to it through |
| the new SPI flash framework. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 5605ef6b5802921cbefe6a933a9dea3497396b5c |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri Jun 20 12:44:28 2008 +0200 |
| |
| avr32: Fix SPI portmux initialization |
| |
| Use the new GPIO manipulation functions to set up the chip select lines, |
| and make sure both busses use GPIO for chip select control. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab |
| Author: Peter Ma <pma@mediamatech.com> |
| Date: Sun Jun 1 22:59:24 2008 -0700 |
| |
| avr32: Add GPIO manipulation functions |
| |
| Adds GPIO manipulation functions for AVR32 AP7 platform. |
| |
| Signed-off-by: Peter Ma <pma@mediamatech.com> |
| [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification] |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:02:30 2008 +0200 |
| |
| MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver |
| |
| This patch is based on the following patch sent a few minutes ago: |
| "NAND FSL UPM: driver re-write using the hwcontrol callback" |
| It is untested, of course. Anton, could you please give it a try. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 96026d42fa4e646d28318c0a1438aac4b2017909 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Jun 12 12:40:11 2008 +0200 |
| |
| Fix 4xx build issue |
| |
| Building for 4xx doesn't work since commit 4dbdb768: |
| |
| In file included from 4xx_pcie.c:28: |
| include/asm/processor.h:971: error: expected ')' before 'ver' |
| make[1]: *** [4xx_pcie.o] Error 1 |
| |
| This patch fixes the problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Acked-by: Stefan Roese <sr@denx.de> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a036b0443657fe0f4773786de9092251869f08ac |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jun 19 01:45:50 2008 -0500 |
| |
| MPC8610HPCD: Report board id, board version and fpga version. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jun 19 01:45:27 2008 -0500 |
| |
| MPC8641HPCN: Report board id, board version and fpga version. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 16 10:40:02 2008 +0200 |
| |
| cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably |
| |
| This patch simplifies flash_toggle() (AMD commandset), which is used to |
| detect if a FLASH device is still busy with erase/program operations. On |
| 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation |
| did not detect the busy state reliably, resulting in non erased sectors |
| etc. This patch now simplifies this function by "just" comparing the |
| complete data-word instead of ANDing it with the command-word (0x40) |
| before the compatison. It is done the same way in the Linux implementation |
| chip_ready() in cfi_cmdset_0002.c. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9e4006bca3d9fb4a2d061996771036cb01e539d3 |
| Author: Philip Balister <philip@balister.org> |
| Date: Mon Jun 16 08:58:07 2008 -0400 |
| |
| NAND: Add missing declaration to non-redundant saveenv(). |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Mon Jun 2 15:09:55 2008 +0200 |
| |
| MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 10 15:34:11 2008 +0200 |
| |
| ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output |
| |
| This patch disables the square wave output of the M41T62 RTC used on |
| Canyonlands & Glacier. Here the explanation: |
| |
| The serial real-time clock part used in the design is an |
| STMicro M41T62. This part has a full-time 32KHz square wave |
| output that is connected to the TmrClk input to the |
| processor. The default state for this square wave output is |
| enabled so the output runs continuously when the board is |
| powered normally and also from the battery. The TmrClk input |
| to the processor goes to ground when the power is removed |
| from the board/processor, and therefore the running square |
| wave output is driving ground which drains the battery quickly. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a94f22f08f280905926219e568568964cb9eeb9d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jun 11 18:10:20 2008 -0500 |
| |
| Fix build issue with string.h and linux/string.h |
| |
| This commit: |
| commit 338cc038461a6c7709c5b86fd9a240209338a1ae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jun 6 14:28:14 2008 +0200 |
| |
| tools/mkimage: fix compiler warnings on some systems. |
| |
| Broke building on some systems, because the host's string.h was interfering |
| with u-boot's linux/string.h. It doesn't look like we need the u-boot one if |
| we're building for the host, so now we only include when building inside |
| u-boot. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 9973e3c614721bbf169882ffc3be266a6611cd60 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Jun 9 16:03:40 2008 -0500 |
| |
| Change initdram() return type to phys_size_t |
| |
| This patch changes the return type of initdram() from long int to phys_size_t. |
| This is required for a couple of reasons: long int limits the amount of dram |
| to 2GB, and u-boot in general is moving over to phys_size_t to represent the |
| size of physical memory. phys_size_t is defined as an unsigned long on almost |
| all current platforms. |
| |
| This patch *only* changes the return type of the initdram function (in |
| include/common.h, as well as in each board's implementation of initdram). It |
| does not actually modify the code inside the function on any of the platforms; |
| platforms which wish to support more than 2GB of DRAM will need to modify |
| their initdram() function code. |
| |
| Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc |
| MPC8641HPCN. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 391fd93ab23e15ab3dd58a54f5b609024009c378 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Jun 9 20:37:18 2008 -0500 |
| |
| Change lmb to use phys_size_t/phys_addr_t |
| |
| This updates the lmb code to use phys_size_t |
| and phys_addr_t instead of unsigned long. Other code |
| which interacts with this code, like getenv_bootm_size() |
| is also updated. |
| |
| Booted on MPC8641HPCN, build-tested ppc, arm, mips. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 61b09fc2952dc636017df4e7970e3de132276ba1 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Jun 9 20:37:17 2008 -0500 |
| |
| Change print_size to take phys_size_t |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Mon Jun 9 20:37:16 2008 -0500 |
| |
| Change bd/gd memsize/ram_size to be phys_size_t. |
| |
| Currently, both are defined as an unsigned long, but |
| should be phys_size_t. This should result in no real change, |
| since phys_size_t is currently an unsigned long for all the |
| default configs. Also add print_lnum to cmd_bdinfo to deal |
| with the potentially wider memsize. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit ba04f7010958e88a8910f2a123fee53fdc72e013 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jun 10 16:16:02 2008 -0500 |
| |
| FSL LAW: Add new interface to use the last free LAW |
| |
| LAWs have the concept of priority so its useful to be able to allocate |
| the lowest (highest number) priority. We will end up using this with the |
| new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 859a86a25c569d3665ff413d1d923394b8a961f3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jun 11 00:51:45 2008 -0500 |
| |
| 85xx/86xx: Move to dynamic mgmt of LAWs |
| |
| With the new LAW interface (set_next_law) we can move to letting the |
| system allocate which LAWs are used for what purpose. This makes life |
| a bit easier going forward with the new DDR code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit f060054dadbbe7027ca088eed806a3ef1f82fdb7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jun 11 00:44:10 2008 -0500 |
| |
| FSL LAW: Keep track of LAW allocations |
| |
| Make it so we keep track of which LAWs have allocated and provide |
| a function (set_next_law) which can allocate a LAW for us if one is |
| free. |
| |
| In the future we will move to doing more "dynamic" LAW allocation |
| since the majority of users dont really care about what LAW number |
| they are at. |
| |
| Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ddde74a159caa6e18b481fec01d40b885aebb566 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jun 9 22:31:57 2008 -0500 |
| |
| 85xx: remove dummy board_early_init_f |
| |
| A number of board ports have empty version of board_early_init_f |
| for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 81e56e9af0d43712db8efb843606a8d62eab454f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jun 9 18:55:38 2008 -0500 |
| |
| MPC8544DS: Update config.h |
| |
| * Enable flash progress |
| * remove CLEAR_LAW0 since we dont really use it |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 978e81604c1b28526ed580df0fbe64eb8384e94f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jun 9 13:37:24 2008 -0500 |
| |
| 85xx: Remove unused and unconfigured memory test code. |
| |
| Remove unused and unconfigured DDR test code from FSL 85xx boards. |
| Besides, other common code exists. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Jun 6 15:42:45 2008 +0200 |
| |
| Socrates: Added FPGA base address update in FDT. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Jun 6 15:42:44 2008 +0200 |
| |
| Socrates: NAND support added. Changed the U-Boot base address and |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 248ae5cfc8bf69074d1da099dc495d8e06070547 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Jun 6 15:42:43 2008 +0200 |
| |
| NAND: Added support for 128-bit OOB, adapted |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 31ca0208612f2eb57690110d7c2815953650e47b |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Jun 6 15:42:42 2008 +0200 |
| |
| Socrates: added missed file with UPMA configuration data. |
| |
| Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Jun 6 15:42:41 2008 +0200 |
| |
| Socrates: Added FPGA mapping. LAWs and TLBs cleanup. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 740280e68ccc0b971e613face7eaaa8bd1382b8c |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Jun 6 15:42:40 2008 +0200 |
| |
| Added the upmconfig() function for 85xx. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d39e68514ff943930ee692cff3fde03532eb7fec |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Fri Jun 6 15:42:39 2008 +0200 |
| |
| Socrates: config file cleanup. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit e8cc3f04b124f757af4528206e60d8eb715ae083 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:10 2008 +0200 |
| |
| TQM85xx: Change memory map to support Flash memory > 128 MiB |
| |
| Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash |
| memory. The current memory map only supports up to 128 MiB Flash. |
| This patch adds the configuration option CONFIG_TQM_BIGFLASH. If |
| set, up to 1 GiB flash is supported. To achieve this, the memory |
| map has to be adjusted in great parts (for example the CCSRBAR is |
| moved from 0xE0000000 to 0xA0000000). |
| |
| If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new |
| memory map also has to be considered in the kernel (changed |
| CCSRBAR address, changed PCI IO base address, ...). Please use |
| an appropriate Flat Device Tree blob (tqm8548.dtb). |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:09 2008 +0200 |
| |
| TQM85xx: NAND support via local bus UPMB |
| |
| This patch adds support for NAND FLASH on the TQM8548. It is disabled by |
| default and can be enabled for the TQM8548 modules. It is now based on |
| the re-written FSL NAND UPM driver. A patch has been posted earlier today |
| with the subject: |
| |
| "NAND FSL UPM: driver re-write using the hwcontrol callback" |
| |
| Note that the R/B pin is not supported by that module requiring to use |
| the specified maximum delay time. |
| |
| Note: With NAND support enabled the size of the U-Boot image exceeds |
| 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk, |
| doubling the image size :-(. |
| |
| Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de> |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit b9e8078bb3f3c48111a7081e27279938c3a445e1 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:08 2008 +0200 |
| |
| TQM8548: PCI express support |
| |
| This patch adds support for PCI express cards. The board support |
| now uses common FSL PCI init code, for both, PCI and PCIe on all |
| TQM85xx modules. |
| |
| Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de> |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:07 2008 +0200 |
| |
| TQM8548: Basic support for the TQM8548 modules |
| |
| This patch adds basic support for the TQM8548 module from TQ-Components |
| (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for |
| eTSEC 3 and 4 |
| |
| Furthermore Flash buffer write has been enabled to speed up output to |
| the Flash by approx. a factor of 10. |
| |
| Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de> |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit 25991353204c78b094c3c1fec90182dcd607ab8f |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:06 2008 +0200 |
| |
| TQM85xx: Support for Flat Device Tree |
| |
| This patch adds support for Linux kernels using the Flat Device Tree. |
| It also re-defines the default environment settings for booting Linux |
| with the FDT blob. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit d9ee843d54c54776e1fdb86336ce554906a87331 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:05 2008 +0200 |
| |
| TQM85xx: Support for Intel 82527 compatible CAN controller |
| |
| This patch adds initialization of the UPMC RAM to support up to two |
| Intel 82527 compatible CAN controller on the TQM85xx modules. |
| |
| Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de> |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit 518d5cfe72916323c746af1647764459914f555f |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:04 2008 +0200 |
| |
| TQM85xx: Bugfix in the SDRAM initialisation |
| |
| The CS0_BNDS register is now set according to the detected |
| memory size. |
| |
| Signed-off-by Martin Krause <martin.krause@tqs.de> |
| |
| commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:03 2008 +0200 |
| |
| TQM85xx: Fix chip select configuration for second FLASH bank |
| |
| This patch fixes the re-calculation of the automatic chip select |
| configuration for boards with two populated FLASH banks. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:02 2008 +0200 |
| |
| TQM85xx: Support for Spansion 'N' type flashes added |
| |
| The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors, |
| than the formerly used 'M' types (S29GLxxxM series), so the flash layout |
| needs to be changed -> new start address of the environment. The macro |
| definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be |
| defined for boards with 'N' type flashes. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit 5d5bd838f76eade22c0ea40a500389f924d0da36 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:01 2008 +0200 |
| |
| TQM85xx: Fix CPM port pin configuration |
| |
| Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560 |
| board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used |
| as serial interface anyway. Worse, on some board variants configuring the |
| pins for SCC1 leads to short circuits (for example on the TQM8541-BG). |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit b99ba1679e8cd51b023e67098c89e606e47137d2 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:12:00 2008 +0200 |
| |
| TQM85xx: Various coding style fixes |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Jun 10 22:15:58 2008 -0400 |
| |
| libfdt: Move the working_fdt pointer to cmd_fdt.c |
| |
| The working_fdt pointer was declared in common/fdt_support.c but was |
| not used there. Move it to common/cmd_fdt.c where it is used (it is |
| also used in lib_ppc/bootm.c). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jun 10 11:06:17 2008 -0500 |
| |
| fdt: unshadow global working fdt variable |
| |
| differentiate with local variables of the same name by renaming the |
| global 'fdt' variable 'working_fdt'. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e1eb0e25d9d8fd8efdfb93f670a417663f386022 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Jun 10 18:49:34 2008 -0500 |
| |
| socrates: Fix PCI clk fix patch |
| |
| The submitted patch seems to have been more up-to-date, but an older patch was |
| already in the repository. This patch encompasses the differences |
| |
| Taken entirely from Sergei Poselenov <sposelenov@emcraft.com> |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:02:29 2008 +0200 |
| |
| NAND FSL UPM: driver re-write using the hwcontrol callback |
| |
| This is a re-write of the NAND FSL UPM driver using the more universal |
| hwcontrol callback (instead of the cmdfunc callback). Here is a brief |
| list of furher modifications: |
| |
| - For the time being, the UPM setup writing the UPM array has been |
| removed from the driver and must now be done by the board specific |
| code. |
| |
| - The bus width definition in "struct fsl_upm_nand" is now in bits to |
| comply with the corresponding Linux driver and 8, 16 and 32 bit |
| accesses are supported. |
| |
| - chip->dev_read is only set if fun->dev_ready != NULL, which is |
| required for boards not connecting the R/B pin. |
| |
| - A few issue have been fixed with MxMR bit manipulation like in the |
| corresponding Linux driver. |
| |
| Note: I think the "io_addr" field of "struct fsl_upm" could be removed |
| as well, because the address is already determined by |
| "nand->IO_ADDR_[RW]", but I'm not 100% sure. |
| |
| This patch has been tested on a TQM8548 modules with the NAND chip |
| Micron MT29F8G08FABWP. |
| |
| This patch is based on the following patches posted to this list a few |
| minutes ago: |
| |
| PPC: add accessor macros to clear and set bits in one shot |
| 83xx/85xx/86xx: add more MxMR local bus definitions |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 6beecfbb542992eede5831240cd58678274683a9 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Thu Jun 5 13:11:59 2008 +0200 |
| |
| MPC85xx: Beautify boot output of L2 cache configuration |
| |
| The boot output is now aligned poperly with other boot output |
| lines, e.g.: |
| |
| FLASH: 128 MB |
| L2: 512 KB enabled |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit 398415114f0a705163a14543e9fef03f734b1ffa |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Wed Jun 4 12:45:22 2008 +0200 |
| |
| PPC: add accessor macros to clear and set bits in one shot |
| |
| PPC: add accessor macros to clear and set bits in one shot |
| |
| This patch adds macros from linux/include/asm-powerpc/io.h to clear and |
| set bits in one shot using the in_be32, out_be32, etc. accessor functions. |
| They are very handy to manipulate bits it I/O registers. |
| |
| This patch is required for my forthcoming FSL NAND UPM driver re-write and |
| the support for the TQM8548 module. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit 4677988c7edc070c3786d3db7994abeca3ab82a0 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Wed Jun 4 13:52:17 2008 +0200 |
| |
| TQM: move TQM boards to board/tqc |
| |
| Move all TQM board directories to the vendor specific directory "tqc" |
| for modules from TQ-Components GmbH (http://www.tqc.de). |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Mon Jun 2 12:09:30 2008 +0200 |
| |
| 83xx/85xx/86xx: add more MxMR local bus definitions |
| |
| 83xx/85xx/86xx: add more MxMR local bus definitions |
| |
| This patch adds more macro definitions for the UPM Machine Mode Registers |
| They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx |
| common local bus definitions into include/asm-ppc/fsl_lbc.h. They are |
| required for my forthcoming FSL NAND UPM driver re-write and the support |
| for the TQM8548 module. |
| |
| This patch is based on the following two patches from Anton Vorontsov: |
| |
| http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html |
| http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html |
| |
| I leave coding style violation fixes, code beautification and name |
| corrections to somebody else ;-(. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| |
| commit c8c5fc266e4499e283c293ccb972863156aa4134 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu May 29 18:14:56 2008 +0400 |
| |
| 83xx/85xx: further localbus cleanups |
| |
| Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names |
| from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 42dbd667c88d496882d53e22656e89b654205492 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed May 28 18:20:15 2008 +0400 |
| |
| 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h |
| |
| This patch moves Freescale Localbus defines out of mpc83xx.h, so we could |
| use it on MPC85xx and MPC86xx processors. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu May 29 11:22:06 2008 -0500 |
| |
| 85xx: Add setting of cache props in the device tree. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4dbdb7681e243431530df0725627192a0c4aefda |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jun 10 16:53:46 2008 -0500 |
| |
| 85xx: expose cpu identification |
| |
| The current cpu identification code is used just to return the name |
| of the processor at boot. There are some other locations that the name |
| is useful (device tree setup). Expose the functionality to other bits |
| of code. |
| |
| Also, drop the 'E' suffix and add it on by looking at the SVR version |
| when we print this out. This is mainly to allow the most flexible use |
| of the name. The device tree code tends to not care about the 'E' suffix. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2329fe113d847e43cca8e4a0e4edd613b50b8492 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jun 10 13:25:24 2008 -0500 |
| |
| mpc83xx: MVBLM7: minor build fixups |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a1293e549b56da135ef32ffca5b9d35a16aa6802 |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Tue Jun 10 09:14:05 2008 +0200 |
| |
| add MPC8343 based board mvBlueLYNX-M7 (board+make files) |
| |
| Add MPC8343 based board mvBlueLYNX-M7. |
| It's a single board stereo camera system. |
| Please read doc/README.mvblm7 for details. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c005b93925ba49f07da2aa748527996d927e172f |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Tue Jun 10 09:13:16 2008 +0200 |
| |
| add MPC8343 based board mvBlueLYNX-M7 (doc+config) |
| |
| Add MPC8343 based board mvBlueLYNX-M7. |
| It's a single board stereo camera system. |
| Please read doc/README.mvblm7 for details. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Thu May 29 18:14:56 2008 +0400 |
| |
| 83xx/85xx: further localbus cleanups |
| |
| move the BRx_* and ORx_* left behind in mpc85xx.h |
| |
| The same is needed for mpc8xx.h and mpc8260.h (defines are almost |
| the same, just few differences which needs some attention though). |
| |
| But the bad news for mpc8xx and mpc8260 is that there are a lot of users |
| of these defines. So this cleanup I'll leave for the "better times". |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit bf30bb1f7c954d7855d9b23624b33b00c50b4697 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed May 28 18:20:15 2008 +0400 |
| |
| 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h |
| |
| This patch moves Freescale Localbus defines out of mpc83xx.h, so we could |
| use it on MPC85xx and MPC86xx processors. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a |
| Author: Tor Krill <tor@excito.com> |
| Date: Mon Jun 2 15:09:30 2008 +0200 |
| |
| Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3b904ccb93c3196727e2e9870cb1df903cab19ad |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Mon Jun 9 23:37:44 2008 +0900 |
| |
| net: Conditional COBJS inclusion of network drivers |
| |
| Replace COBJS-y with appropriate driver config names. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 2fb698bf50f4aff2485581a12fa634a07c040e4a |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 9 21:02:17 2008 -0400 |
| |
| Use strncmp() for the fdt command |
| |
| Cleaner than doing multiple conditionals on characters. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Jun 7 12:25:05 2008 -0400 |
| |
| The fdt boardsetup command criteria was not unique |
| |
| It was checking just for "b", which is not unique with respect to the |
| "boot" command. Change to check for "boa"[rdsetup]. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 2f08bfa9526bae4f461e043530cfb903fec0d273 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Tue May 20 17:19:11 2008 +1000 |
| |
| libfdt: Several cleanups to parameter checking |
| |
| This patch makes a couple of small cleanups to parameter checking of |
| libfdt functions. |
| |
| - In several functions which take a node offset, we use an |
| idiom involving fdt_next_tag() first to check that we have indeed been |
| given a node offset. This patch adds a helper function |
| _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag(). |
| |
| - In fdt_rw.c in several places we have the expanded version |
| of the RW_CHECK_HEADER() macro for no particular reason. This patch |
| replaces those instances with an invocation of the macro; that's what |
| it's for. |
| |
| - In fdt_sw.c we rename the check_header_sw() function to |
| sw_check_header() to match the analgous function in fdt_rw.c, and we |
| provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER() |
| functions in fdt_rw.c |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit fec6d9ee7c10443f65ce1788ef818919167bbf2e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Jun 3 20:34:45 2008 -0400 |
| |
| Remove the deprecated CONFIG_OF_FLAT_TREE |
| |
| Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is |
| cleaner, has better functionality, and is better supported. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 62bcdda293efa752f8281fbd9da03822b27ce82f |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Jun 3 20:26:29 2008 -0400 |
| |
| Change the stxxst to CONFIG_OF_LIBFDT |
| |
| This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change |
| to CONFIG_OF_LIBFDT. |
| |
| WARNING: It appears that this board lost its ability to boot via a |
| flattened device tree prior to this changeset. |
| |
| WARNING: This conversion was untested because I do not have a board to |
| test it on. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 589c04271d129729a8b01391453851ab9cc4069c |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Jun 3 20:24:58 2008 -0400 |
| |
| Convert mpc7448hpc2 to CONFIG_OF_LIBFDT |
| |
| This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change |
| to CONFIG_OF_LIBFDT. |
| |
| WARNING: This conversion is untested because I do not have a board to |
| test it on. |
| |
| NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally) |
| /aliases/ethernet1 property for the ethernet to work. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit ee1e35bede91debc8bff9b02f75574486033b652 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu May 29 01:21:24 2008 -0500 |
| |
| 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3b9519fc50802436e417c839e69df7b2016cade5 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed May 14 13:10:04 2008 -0500 |
| |
| MPC85xx: Change traps.c to not reference non-addressable memory |
| |
| Currently, END_OF_RAM is used by the trap code to determine if |
| we should attempt to access the stack pointer or not. However, |
| on systems with a lot of RAM, only a subset of the RAM is |
| guaranteed to be mapped in and accessible. Change END_OF_RAM |
| to use get_effective_memsize() instead of using the raw ram |
| size out of the bd. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 7faddaecea52f585f538fdf9c2e61f85a789b19c |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Mon Jun 9 13:39:57 2008 +0900 |
| |
| sh: Renesas Solutions SH7763RDP board support |
| |
| SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC. |
| In this patch, support SCIF, NOR Flash, and Ethernet. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 60179098a95eaa972007d7ec58e4c1588029720f |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Fri Jun 6 16:24:13 2008 +0900 |
| |
| sh: Add support Renesas SH7763 |
| |
| Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other. |
| This patch supprts CPU register's header file. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 08c5fabe181d663eec0feba5ecd02c0b78934a52 |
| Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Date: Fri Jun 6 16:16:08 2008 +0900 |
| |
| sh: SH7763 SCIF support |
| |
| SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution, |
| but only SCIF2 is different. This patch work all SCIF channel. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 79b51ff8205f0354d5300570614c1d2db499679c |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Jun 7 20:51:59 2008 +0900 |
| |
| [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines |
| |
| Also get rid of some #ifdefs in *.c files. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 8bde63eb3f79d68f693201528dafc8ae7aa087de |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Jun 7 20:51:56 2008 +0900 |
| |
| [MIPS] Rename Alchemy processor configs into CONFIG_SOC_* |
| |
| CONFIG_SOC_AU1X00 |
| |
| Common Alchemy Au1x00 stuff. All Alchemy processor based machines |
| need to have this config as a system type specifier. |
| |
| CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200, |
| CONFIG_SOC_AU1500, CONFIG_SOC_AU1550 |
| |
| Machine type specifiers. Each port should have one of aboves. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc |
| Author: Stuart Wood <stuart.wood@labxtechnologies.com> |
| Date: Fri May 30 16:05:28 2008 -0400 |
| |
| env_nand.c: Added bad block management for environment variables |
| |
| Modified to check for bad blocks and to skipping over them when |
| CFG_ENV_RANGE has been defined. |
| CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND |
| flash block size. |
| |
| Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 279726bd00558e80263d44581c44167625b7fb9a |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed May 14 13:09:58 2008 -0500 |
| |
| MPC86xx: Change traps.c to not reference non-addressable memory |
| |
| Currently, END_OF_RAM is used by the trap code to determine if |
| we should attempt to access the stack pointer or not. However, |
| on systems with a lot of RAM, only a subset of the RAM is |
| guaranteed to be mapped in and accessible. Change END_OF_RAM |
| to use get_effective_memsize() instead of using the raw ram |
| size out of the bd to prevent us from trying to access |
| non-mapped memory. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 338cc038461a6c7709c5b86fd9a240209338a1ae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jun 6 14:28:14 2008 +0200 |
| |
| tools/mkimage: fix compiler warnings on some systems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b2815f79288d4da7a3ba18bdbd05120ce09d5622 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 6 16:10:41 2008 +0200 |
| |
| ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options |
| |
| We use upper case letters for the AMCC processor defines (like |
| CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and |
| not CONFIG_440SPe. This patch fixes the last misspelled config options. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 72675dc6c06a48846d180106161d49dd714383cc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 6 15:55:21 2008 +0200 |
| |
| ppc4xx: Unify AMCC's board config files (part 3/3) |
| |
| This patch series unifies the AMCC eval board ports by introducing |
| a common include header for all AMCC eval boards: |
| |
| include/configs/amcc-common.h |
| |
| This header now includes all common configuration options/defines which |
| are removed from the board specific headers. |
| |
| The reason for this is ease of maintenance and unified look and feel |
| of all AMCC boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 490f204096d6e2c9940f67816f154a8125bab116 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 6 15:55:03 2008 +0200 |
| |
| ppc4xx: Unify AMCC's board config files (part 2/3) |
| |
| This patch series unifies the AMCC eval board ports by introducing |
| a common include header for all AMCC eval boards: |
| |
| include/configs/amcc-common.h |
| |
| This header now includes all common configuration options/defines which |
| are removed from the board specific headers. |
| |
| The reason for this is ease of maintenance and unified look and feel |
| of all AMCC boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a8a11a9ed046b480a16e47a158f8f5300028dfa6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 6 15:54:31 2008 +0200 |
| |
| ppc4xx: Unify AMCC's board config files (part 1/3) |
| |
| This patch series unifies the AMCC eval board ports by introducing |
| a common include header for all AMCC eval boards: |
| |
| include/configs/amcc-common.h |
| |
| This header now includes all common configuration options/defines which |
| are removed from the board specific headers. |
| |
| The reason for this is ease of maintenance and unified look and feel |
| of all AMCC boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Thu Jun 5 13:03:36 2008 +0200 |
| |
| DM9000 fix status check fail 0x6d error for trizeps board |
| |
| According to the Application Notes of the DM9000, only the 2 bits 0:1 of |
| the status byte need to be checked to identify a valid packet in the fifo |
| |
| But, The several different Application Notes do not all speak the same |
| language on these bits. They do not disagree, but only 1 Application Note |
| noted explicitly that only these 2 bits need to be checked. |
| Even the datasheets do not mention anything about these 2 bits. |
| |
| Because the old code, and the kernel check the whole byte, I left this piece |
| untouched. |
| |
| However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so |
| it should work. |
| |
| Notice, that the 2nd iteration through this receive loop (when a 2nd packet is |
| in the fifo) is much shorter now, compared to the older U-boot driver code, |
| so that we can maybe run into a hardware condition now that was never seen |
| before, or maybe was seen very unfrequently. |
| |
| Additionaly added a cleanup of a stack variable. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Thu Jun 5 22:29:00 2008 +0900 |
| |
| [MIPS] Update <asm/addrspace.h> header |
| |
| - Fix traditional KSEG names |
| - Replace PHYSADDR with CPHYSADDR |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit f0d5a6f060d00358b85c62a921a423ea8df71184 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Thu Jun 5 22:29:00 2008 +0900 |
| |
| [MIPS] mips_config.mk: Misc fixes |
| |
| - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk) |
| - Modify comments |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 5f64d21c9a2998794f255b469165b91f092dfc2d |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Thu Jun 5 22:29:00 2008 +0900 |
| |
| [MIPS] Kill unused <version.h> inclusions |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit a55d48174cfd1a5bc184159513f48dcbbe409c83 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Thu Jun 5 22:29:00 2008 +0900 |
| |
| [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines |
| |
| MIPS port has two problems in timer routines. One is now we assume CFG_HZ |
| equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000 |
| in the U-Boot system. |
| |
| The other is we don't have a proper time management counter like timestamp |
| other ARCHs have. We need the 32-bit millisecond clock counter. |
| |
| This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a |
| 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number |
| of calculated CP0 counter cycles in a CFG_HZ. |
| |
| STRATEGY: |
| |
| * Fix improper CFG_HZ value to have 1000 |
| |
| * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead. |
| |
| * timer_init: initialize timestamp and set up the first timer expiration. |
| Note that we don't need to initialize CP0 count/compare registers here |
| as they have been already zeroed out on the system reset. Leave them as |
| they are. |
| |
| * get_timer: calculate how many timestamps have been passed, then return |
| base-relative timestamp. Make sure we can easily count missed timestamps |
| regardless of CP0 count/compare value. |
| |
| * get_ticks: return the current timestamp, that is get_timer(0). |
| |
| Most parts are from good old Linux v2.6.16 kernel. |
| |
| v2: |
| - Remove FIXME comments as they turned out to be trivial. |
| - Use CP0 compare register as a global variable for expirelo. |
| - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY |
| instead. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Thu Jun 5 22:29:00 2008 +0900 |
| |
| [MIPS] lib_mips/time.c: Fix udelay |
| |
| What we have to do is just to wait for given micro-seconds. No need to |
| take into account current time, get_timer and CFG_HZ. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Thu Jun 5 22:28:59 2008 +0900 |
| |
| [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros |
| |
| We already have many pre-defined CP0 access macros in <asm/mipsregs.h>. |
| This patch replaces mips_{compare,count}_set and mips_count_get with |
| existing macros. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 6b52cfe16cd539935e32bd8cf19146522e462a4d |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Jun 3 15:48:17 2008 +0200 |
| |
| Get rid of annoying/superfluous bad-checksum warning message |
| |
| U-boot can complain a lot about 'checksum bad' when it is attached to the network. |
| It is annoying for ordinary users who start to doubt the network connection |
| in general when they see messages like this. |
| |
| This is caused by the routine NetCksumOk() which cannot handle IP-headers longer |
| than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them |
| now before checking the checksum. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d6ee5fa40c26970d39990c6fc4a2f20a97822650 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Wed Jun 4 10:47:25 2008 +0200 |
| |
| Fix order for reading rx-status registers in 32bit mode of DM9000 |
| |
| A last minute cleanup before submitting the DM9000A patch series yesterday introduced |
| a bug in reading the rx-status registers in 32bit mode only. |
| This patch repairs this. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 98291e2e689096420465074cce926b226d2e71b4 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Jun 3 15:26:26 2008 +0200 |
| |
| DM9000: Some minor code cleanups |
| |
| Some lines of the U-boot DM9000x driver are longer than 80 characters, or |
| need some other minor cleanup. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 850ba7555dbd4ca8d14fc475b864d534797adab3 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Jun 3 15:26:25 2008 +0200 |
| |
| DM9000: Make driver work properly for DM9000A |
| |
| The DM9000A network controller does not work with the U-boot DM9000x driver. |
| Analysis showed that many incoming packets are lost. |
| |
| The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to |
| check for a valid rx packet be done on the interrupt status register, not |
| directly by performing the dummy read and the rx status check as is currently |
| the case in the u-boot driver. |
| |
| When the recommended poll is done as suggested the driver starts working |
| correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there |
| can be more than 1 package in the fifo at the same time. |
| |
| The driver must perform the rx-status check in a loop and read and handle all |
| packages until there is no more left _after_ the interrupt RX flag is set. |
| |
| This change has been tested with DM9000A, DM9000E, DM9000EP. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Jun 3 15:26:24 2008 +0200 |
| |
| DM9000: Improve eth_reset() routine |
| |
| According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the |
| reset procedure must be done twice to properly reset the DM9000 by means of software. |
| This errata is not needed anymore for the DM9000A, but it does not bother it. |
| |
| This change has been tested with DM9000A, DM9000E, DM9000EP. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit acba31847fad9ae40708cc2c9f3a634ec35f3416 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Jun 3 15:26:23 2008 +0200 |
| |
| DM9000: improve eth_send() routine |
| |
| The eth_send routine of the U-boot DM9000x driver does not match the |
| DM9000 or DM9000A application notes/programming guides. |
| |
| This change improves the stability of the DM9000A network controller. |
| |
| This change has been tested with DM9000A, DM9000E, DM9000EP. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 134e266253c02a7832560da59d394989c4f64453 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Jun 3 15:26:22 2008 +0200 |
| |
| DM9000: repair debug logging |
| |
| It seems that the debugging code of the DM9000x driver in U-boot has not been |
| compiled for a long time, because it cannot compile... |
| |
| Also rearranged some loglines to get more useful info while debugging. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit a101361bfe23c120321e45d114c0603b8e0763e9 |
| Author: Remy Bohmer <linux@bohmer.net> |
| Date: Tue Jun 3 15:26:21 2008 +0200 |
| |
| DM9000: Add data bus-width auto detection. |
| |
| The U-boot DM9000x driver contains a compile time bus-width definition for |
| the databus connected to the network controller. |
| |
| This compile check makes the code unclear, inflexible and is unneccessary. |
| It can be asked to the network controller what its bus-width is by reading bits |
| 6 and 7 of the interrupt status register. |
| |
| The linux kernel already uses a runtime mechanism to determine this bus-width, |
| so the implementation below looks somewhat like that implementation. |
| |
| This change has been tested with DM9000A, DM9000E, DM9000EP. |
| |
| Signed-off-by: Remy Bohmer <linux@bohmer.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 63a0afa0c32e5f4ea98a9439542870072437404d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jun 4 19:19:20 2008 +0200 |
| |
| ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port |
| |
| This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene) |
| introduced by the commit: |
| |
| ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S |
| |
| With this patch SDRAM will get initialized again and booting from NAND |
| is working again. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| |
| commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue May 27 14:19:30 2008 +0200 |
| |
| Socrates: Fix PCI bus frequency report |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f |
| Author: Tor Krill <tor@excito.com> |
| Date: Thu May 29 11:10:30 2008 +0200 |
| |
| Fix incorrect switch for IF_TYPE in part.c |
| |
| Use correct field in block_dev_desc_t when writing interface type in |
| dev_print. Error introduced in 574b3195. |
| |
| Also added fix from Martin Krause |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| |
| commit b64b8a0bd310935b70af69ac970952f2b364ae56 |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Tue May 27 10:25:39 2008 +0200 |
| |
| Add size #defines for Altera Cyclone-II EP2C8 and EP2C20. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| |
| commit 35ef877f0a8f6232cdef748f442fed5accb2b641 |
| Author: Peter Tyser <ptyser@xes-inc.com> |
| Date: Thu May 22 18:56:52 2008 -0500 |
| |
| Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating |
| |
| Removed unneeded command line history initialization. Also, the original |
| code would access the 'initted' variable before relocation to SDRAM |
| which resulted in erratic behavior since the bss is not initialized when |
| executing from flash. |
| |
| Signed-off-by: Peter Tyser <ptyser@xes-inc.com> |
| |
| commit 22f371b63038a4ecab04068877c1089e51a01ba1 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Wed May 21 13:28:30 2008 -0700 |
| |
| PPC4xx: Simplified post_word_{load, store} |
| |
| This patch simplifies post_word_{load,store} by using the preprocessor |
| to eliminate redundant, copy-and-pasted code. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| |
| commit 9c048b523413ae5f3ff34e00cf57569c3368ab51 |
| Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru> |
| Date: Wed May 7 21:25:33 2008 +0400 |
| |
| cfi_flash: enable M18 flash chips family support. |
| |
| Added new command set ID. Buffered write command processing is changed |
| in order to support M18 flash chips family. |
| |
| Signed-off-by: Alexey Korolev <akorolev@infradead.org> |
| Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> |
| |
| commit 93c56f212ccdadc182018f0769cb284426b88f1d |
| Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru> |
| Date: Wed May 7 21:24:44 2008 +0400 |
| |
| cfi_flash: support of long cmd in U-boot. |
| |
| Some NOR flash chips needs support of commands with length grether than max |
| value size of uchar. For example all M18 family chips use 0x1ff command in |
| buffered write mode as value of program loops count. |
| |
| Signed-off-by: Alexey Korolev <akorolev@infradead.org> |
| Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> |
| |
| commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri May 16 11:06:06 2008 +0200 |
| |
| DTT: Issue one-shot command on AD7414 (LM75 code) to read temp |
| |
| On AD7414 the first value upon bootup is not read correctly. |
| This is most likely because of the 800ms update time of the |
| temp register in normal update mode. To get current values |
| each time we issue the "dtt" command including upon powerup |
| we switch into one-short mode. |
| |
| This patch fixes the problem on AD7414 equipped boards (Sequoia, |
| Canyonlands etc), that temp value printed in the bootup log was |
| incorrect. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit de5bfcf7b0425e032be12698252dbaa6b65a28c0 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri May 30 16:55:06 2008 +0200 |
| |
| ppc4xx: Cleanup CPCI405 variant's config file |
| |
| This patch removes some dead code from CPCI405 board's |
| config files. JFFS2 support is also removed. It's not used and |
| CPCI4052 does not build anymore without some size reduction. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65 |
| Author: Kenneth Johansson <kenneth@southpole.se> |
| Date: Thu May 29 16:32:33 2008 +0200 |
| |
| Remove shell variable UNDEF_SYM. |
| |
| UNDEF_SYM is a shell variable in the main Makefile used to force the |
| linker to add all u-boot commands to the final image. It has no use here. |
| |
| Signed-off-by: Kenneth Johansson <kenneth@southpole.se> |
| |
| commit 8c66497e06bf803489c589df58ee591d71033274 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri May 16 11:10:35 2008 +0200 |
| |
| Add support for environment in SPI flash |
| |
| This is pretty incomplete...it doesn't handle reading the environment |
| before relocation, it doesn't support redundant environment, and it |
| doesn't support embedded environment. But apart from that, it does |
| seem to work. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri May 16 11:10:34 2008 +0200 |
| |
| SPI Flash: Add "sf" command |
| |
| This adds a new command, "sf" which can be used to manipulate SPI |
| flash. Currently, initialization, reading, writing and erasing is |
| supported. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit d25ce7d24cc0f93881559f4009175ea305af65e8 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri May 16 11:10:33 2008 +0200 |
| |
| SPI Flash subsystem |
| |
| This adds a new SPI flash subsystem. |
| |
| Currently, only AT45 DataFlash in non-power-of-two mode is supported, |
| but some preliminary support for other flash types is in place as |
| well. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 60445cb5c3eb77ed1a07f2d908eef09174483698 |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Fri May 16 11:10:32 2008 +0200 |
| |
| atmel_spi: Driver for the Atmel SPI controller |
| |
| This adds a driver for the SPI controller found on most AT91 and AVR32 |
| chips, implementing the new SPI API. |
| |
| Changed in v4: |
| - Update to new API |
| - Handle zero-length transfers appropriately. The user may send a |
| zero-length SPI transfer with SPI_XFER_END set in order to |
| deactivate the chip select after a series of transfers with chip |
| select active. This is useful e.g. when polling the status |
| register of DataFlash. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri May 16 11:10:31 2008 +0200 |
| |
| SPI API improvements |
| |
| This patch gets rid of the spi_chipsel table and adds a handful of new |
| functions that makes the SPI layer cleaner and more flexible. |
| |
| Instead of the spi_chipsel table, each board that wants to use SPI |
| gets to implement three hooks: |
| * spi_cs_activate(): Activates the chipselect for a given slave |
| * spi_cs_deactivate(): Deactivates the chipselect for a given slave |
| * spi_cs_is_valid(): Determines if the given bus/chipselect |
| combination can be activated. |
| |
| Not all drivers may need those extra functions however. If that's the |
| case, the board code may just leave them out (assuming they know what |
| the driver needs) or rely on the linker to strip them out (assuming |
| --gc-sections is being used.) |
| |
| To set up communication parameters for a given slave, the driver needs |
| to call spi_setup_slave(). This returns a pointer to an opaque |
| spi_slave struct which must be passed as a parameter to subsequent SPI |
| calls. This struct can be freed by calling spi_free_slave(), but most |
| driver probably don't want to do this. |
| |
| Before starting one or more SPI transfers, the driver must call |
| spi_claim_bus() to gain exclusive access to the SPI bus and initialize |
| the hardware. When all transfers are done, the driver must call |
| spi_release_bus() to make the bus available to others, and possibly |
| shut down the SPI controller hardware. |
| |
| spi_xfer() behaves mostly the same as before, but it now takes a |
| spi_slave parameter instead of a spi_chipsel function pointer. It also |
| got a new parameter, flags, which is used to specify chip select |
| behaviour. This may be extended with other flags in the future. |
| |
| This patch has been build-tested on all powerpc and arm boards |
| involved. I have not tested NIOS since I don't have a toolchain for it |
| installed, so I expect some breakage there even though I've tried |
| fixing up everything I could find by visual inspection. |
| |
| I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and |
| DataFlash drivers posted as a follow-up. I'd like some help testing |
| other boards that use the existing SPI API. |
| |
| But most of all, I'd like some comments on the new API. Is this stuff |
| usable for everyone? If not, why? |
| |
| Changed in v4: |
| - Build fixes for various boards, drivers and commands |
| - Provide common struct spi_slave definition that can be extended by |
| drivers |
| - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate |
| - Make default bus and mode build-time configurable |
| - Override default SPI bus ID and mode on mx32ads and imx31_litekit. |
| |
| Changed in v3: |
| - Add opaque struct spi_slave for controller-specific data associated |
| with a slave. |
| - Add spi_claim_bus() and spi_release_bus() |
| - Add spi_free_slave() |
| - spi_setup() is now called spi_setup_slave() and returns a |
| struct spi_slave |
| - soft_spi now supports four SPI modes (CPOL|CPHA) |
| - Add bus parameter to spi_setup_slave() |
| - Convert the new i.MX32 SPI driver |
| - Convert the new MC13783 RTC driver |
| |
| Changed in v2: |
| - Convert the mpc8xxx_spi driver and the mpc8349emds board to the |
| new API. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Tested-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 289011207d999b2e4085150d2aa30d547ad9b800 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri May 16 11:10:30 2008 +0200 |
| |
| Move definition of container_of() to common.h |
| |
| AVR32 and AT91SAM9 both have their own identical definitions of |
| container_of() taken from the Linux kernel. Move it to common.h so |
| that all architectures can use it. |
| |
| container_of() is already used by some drivers, and will be used |
| extensively by the new and improved SPI API. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri May 16 11:08:11 2008 +0200 |
| |
| soft_i2c: Pull SDA high before reading |
| |
| Spotted by Dean Capindale. |
| |
| Systems that support open-drain GPIO properly are allowed provide an |
| empty I2C_TRISTATE define. However, this means that we need to be |
| careful not to drive SDA low when the slave is expected to respond. |
| |
| This patch adds a missing I2C_SDA(1) to read_byte() required to |
| tristate the SDA line on systems that support open-drain GPIO. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon May 19 11:34:53 2008 +0200 |
| |
| ppc4xx: Remove implementations of testdram() |
| |
| This patch removes the used testdram() implementations of the board |
| that are maintained by myself. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 2 17:37:28 2008 +0200 |
| |
| ppc4xx: Remove superfluous dram_init() call or replace it by initdram() |
| |
| Historically the 405 U-Boot port had a dram_init() call in early init |
| stage. This function was still called from start.S and most of the time |
| coded in assembler. This is not needed anymore (since a long time) and |
| boards should implement the common initdram() function in C instead. |
| |
| This patch now removed the dram_init() call from start.S and removes the |
| empty implementations that are scattered through most of the 405 board |
| ports. Some older board ports really implement this dram_init() though. |
| These are: |
| |
| csb272 |
| csb472 |
| ERIC |
| EXBITGEN |
| W7OLMC |
| W7OLMG |
| |
| I changed those boards to call this assembler dram_init() function now |
| from their board specific initdram() instead. This *should* work, but please |
| test again on those platforms. And it is perhaps a good idea that those |
| boards use some common 405 SDRAM initialization code from cpu/ppc4xx at |
| some time. So further patches welcome here. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 2 17:22:11 2008 +0200 |
| |
| ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 39b32be18cd33b53a84065edcd4e465165cc5564 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 2 17:20:03 2008 +0200 |
| |
| ppc4xx: Fix common ECC generation code for 440GP style platforms |
| |
| This patch makes the common 4xx ECC code really usable on 440GP style |
| platforms. |
| |
| Since the IBM DDR controller used on 440GP/GX/EP/GR is not register |
| compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT |
| we need to make some processor dependant defines used later on by the |
| driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ec724f883ee3f3925e6c55027e8ffa70ada83303 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 2 17:13:55 2008 +0200 |
| |
| ppc4xx: Change Kilauea to use the common DDR2 init function |
| |
| This patch changes the kilauea and kilauea_nand (for NAND booting) |
| board port to not use a board specific DDR2 init routine anymore. Now |
| the common code from cpu/ppc4xx is used. |
| |
| Thanks to Grant Erickson for all his basic work on this 405EX early |
| bootup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 2 14:59:21 2008 +0200 |
| |
| ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2 |
| |
| This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all |
| ppc4xx related SDRAM/DDR/DDR2 controller defines. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 2 14:57:41 2008 +0200 |
| |
| ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1 |
| |
| This patch removes all SDRAM related defines from the PPC4xx headers |
| ppc405.h and ppc440.h. This is needed since now some 405 PPC's use |
| the same SDRAM controller as 440 systems do (like 405EX and 440SP). |
| |
| It also introduces new defines for the equipped SDRAM controller based on |
| which PPC variant is used. There new defines are: |
| |
| used on 405GR/CR/EP and some Xilinx Virtex boards. |
| |
| used on 440GP/GX/EP/GR. |
| |
| used on 440EPx/GRx. |
| |
| used on 405EX/r/440SP/SPe/460EX/GT. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 2 14:35:44 2008 +0200 |
| |
| ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S |
| |
| This patch consolidates the 405 and 440 parts of the NAND booting code |
| selected via CONFIG_NAND_SPL. Now common code is used to initialize the |
| SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc. |
| Only *after* running from this location, nand_boot() is called. |
| |
| Please note that the initsdram() call is now moved from nand_boot.c |
| to start.S. I experienced problems with some boards like Kilauea |
| (405EX), which don't have internal SRAM (OCM) and relocation needs to |
| be done to SDRAM before the NAND controller can get accessed. When |
| initdram() is called later on in nand_boot(), this can lead to problems |
| with variables in the bss sections like nand_ecc_pos[]. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Thu May 22 14:44:24 2008 -0700 |
| |
| ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling |
| |
| This patch (Part 2 of 2): |
| |
| * Rolls up a suite of changes to enable correct primordial stack and |
| global data handling when the data cache is used for such a purpose |
| for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS). |
| |
| * Related to the first, unifies DDR2 SDRAM and ECC initialization by |
| eliminating redundant ECC initialization implementations and moving |
| redundant SDRAM initialization out of board code into shared 4xx |
| code. |
| |
| * Enables MCSR visibility on the 405EX(r). |
| |
| * Enables the use of the data cache for initial RAM on |
| both AMCC's Kilauea and Makalu and removes a redundant |
| CFG_POST_MEMORY flag from each board's CONFIG_POST value. |
| |
| - Removed, per Stefan Roese's request, defunct memory.c file for |
| Makalu and rolled sdram_init from it into makalu.c. |
| |
| With respect to the 4xx DDR initialization and ECC unification, there |
| is certainly more work that can and should be done (file renaming, |
| etc.). However, that can be handled at a later date on a second or |
| third pass. As it stands, this patch moves things forward in an |
| incremental yet positive way for those platforms that utilize this |
| code and the features associated with it. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c821b5f120bedf73867513466412587c6912a8f8 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Thu May 22 14:44:14 2008 -0700 |
| |
| ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling |
| |
| This patch (Part 1 of 2): |
| |
| * Rolls up a suite of changes to enable correct primordial stack and |
| global data handling when the data cache is used for such a purpose |
| for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS). |
| |
| * Related to the first, unifies DDR2 SDRAM and ECC initialization by |
| eliminating redundant ECC initialization implementations and moving |
| redundant SDRAM initialization out of board code into shared 4xx |
| code. |
| |
| * Enables MCSR visibility on the 405EX(r). |
| |
| * Enables the use of the data cache for initial RAM on |
| both AMCC's Kilauea and Makalu and removes a redundant |
| CFG_POST_MEMORY flag from each board's CONFIG_POST value. |
| |
| - Removed, per Stefan Roese's request, defunct memory.c file for |
| Makalu and rolled sdram_init from it into makalu.c. |
| |
| With respect to the 4xx DDR initialization and ECC unification, there |
| is certainly more work that can and should be done (file renaming, |
| etc.). However, that can be handled at a later date on a second or |
| third pass. As it stands, this patch moves things forward in an |
| incremental yet positive way for those platforms that utilize this |
| code and the features associated with it. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a439680019e06171d4a5694b7992accce87f590e |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Wed May 21 13:28:30 2008 -0700 |
| |
| PPC4xx: Simplified post_word_{load, store} |
| |
| This patch simplifies post_word_{load,store} by using the preprocessor |
| to eliminate redundant, copy-and-pasted code. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| |
| commit f979690ee337450b2030aba128f95b7a8d9881c0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu May 15 15:13:08 2008 -0500 |
| |
| Fix warnings from gcc-4.3.0 build on a ppc host |
| |
| * The cfi_flash.c memset fix actual allows the board to boot so there is |
| a bit more going on here than just resolving warnings associated with |
| uninitialized variables. |
| |
| * include/asm/bitops.h:302: warning: '__swab32p' is static but used in |
| inline function 'ext2_find_next_zero_bit' which is not static |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed May 14 13:09:51 2008 -0500 |
| |
| MPC512x: Change traps.c to not reference non-addressable memory |
| |
| Currently, END_OF_RAM is used by the trap code to determine if |
| we should attempt to access the stack pointer or not. However, |
| on systems with a lot of RAM, only a subset of the RAM is |
| guaranteed to be mapped in and accessible. Change END_OF_RAM |
| to use get_effective_memsize() instead of using the raw ram |
| size out of the bd. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 81673e9ae14b771cd13faf19947192599cae3959 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue May 13 19:01:54 2008 -0500 |
| |
| Make sure common.h is the first include. |
| |
| If common.h isn't first we can get CONFIG_ options defined in the |
| board config file ignored. This can cause an issue if any of those |
| config options impact the size of types of data structures |
| (eg CONFIG_PHYS_64BIT). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue May 13 15:53:29 2008 +0200 |
| |
| Avoid initrd and logbuffer area overlaps |
| |
| Add logbuffer to reserved LMB areas to prevent initrd allocation |
| from overlaping with it. |
| |
| Make sure to use correct logbuffer base address. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 6956d53d9934862507f83f0e3255dfd4662e7482 |
| Author: Sascha Laue <sascha.laue@liebherr.com> |
| Date: Tue May 13 13:29:54 2008 +0200 |
| |
| lwmon5: add memory-pattern-test to FPGA POST. |
| |
| commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Thu May 8 19:02:51 2008 -0500 |
| |
| PPC: 86xx Add bat registers to reginfo command |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Fri May 9 15:41:35 2008 -0500 |
| |
| PPC: Add print_bats() to lib_ppc/bat_rw.c |
| |
| This function prints the values of all the BAT register |
| pairs - I needed this for debug earlier this week; adding it to |
| lib_ppc so others can use it (and add it to reginfo commands |
| if so desired). |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit c148f24c15743a02e855636e6bed013bd121f7f2 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Thu May 15 21:29:04 2008 -0500 |
| |
| PPC: Change lib_ppc/bat_rw.c to use high bats |
| |
| Currently, this code only deals with BATs 0-3, which makes |
| it useless on systems that support BATs 4-7. Add the |
| support for these registers. |
| |
| Signed-off-by: Becky Bruce <Becky.bruce@freescale.com> |
| |
| commit 31d826722434931e1152a09d140187dcf72f8aac |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Thu May 8 19:02:12 2008 -0500 |
| |
| PPC: Create and use CONFIG_HIGH_BATS |
| |
| Change all code that conditionally operates on high bat |
| registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS |
| instead of the myriad ways this is done now. Define the option |
| for every config for which high bats are supported (and |
| enabled by early boot, on parts where they're not always |
| enabled) |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit aa3b8bf9c30065bb2ea852799d32db5020598495 |
| Author: Wolfgang Grandegger <wg@grandegger.com> |
| Date: Wed May 28 19:55:19 2008 +0200 |
| |
| E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit ff36fbb2e7583fb808eef773f511489c7a9c2df3 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed May 28 13:06:25 2008 -0500 |
| |
| ColdFire: Add 10 base ethernet support for mcf5445x |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba |
| Author: Jason McMullan <mcmullan@netapp.com> |
| Date: Fri May 30 00:53:38 2008 +0900 |
| |
| mips: Add an 'include/asm/errno.h', like all other architectures |
| |
| All other u-boot architectures have an include/asm/errno.h, so |
| this change adds it to the mips include/asm-mips headers also. |
| |
| Stolen from Linux 2.6.25. |
| |
| Signed-off-by: Jason McMullan <mcmullan@netapp.com> |
| |
| commit e2ad8426624bac457acc6925b6ff408e9bf20466 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Fri May 30 00:53:38 2008 +0900 |
| |
| [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Fri May 30 00:53:38 2008 +0900 |
| |
| [MIPS] <asm/mipsregs.h>: Update register / bit field definitions |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit bf462ae450a7f2eeeddc699ed345b391e3263540 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Fri May 30 00:53:37 2008 +0900 |
| |
| [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups |
| |
| No functional changes. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 89a1550ec6b74452274a7a23127936e2c7eec711 |
| Author: Jason McMullan <mcmullan@netapp.com> |
| Date: Fri May 30 00:53:37 2008 +0900 |
| |
| mips: If CONFIG_CMD_SPI is defined, call spi_init() |
| |
| The mips architecture currently does not call 'spi_init()' in the generic |
| board initialization routine is CONFIG_CMD_SPI is defined. |
| |
| This patch rectifies that problem. |
| |
| Signed-off-by: Jason McMullan <mcmullan@netapp.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3 |
| Author: Jason McMullan <mcmullan@netapp.com> |
| Date: Fri May 30 00:53:37 2008 +0900 |
| |
| [MIPS] lib_mips/board.c: Add nand_init |
| |
| This patch adds the standard 'nand_init()' call to the mips generic |
| 'board_init_r()' call, bringing MIPS in line with the other architectures. |
| |
| Signed-off-by: Jason McMullan <mcmullan@netapp.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit d6ac2ed893c2168738aee01579d6283af8d37045 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Thu May 22 10:49:46 2008 -0500 |
| |
| Remove prototypes of nand_init() in favor of including nand.h. |
| |
| Likewise with onenand_init(). |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 229c56f07a82eacda8c8720cb146fc9be0f6db54 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Thu May 22 10:49:00 2008 -0500 |
| |
| Make onenand_uboot.h self-sufficient. |
| |
| Don't assume types are provided by previously included headers. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 9723bbb46abb7b2ca24eead5114a3faa58060c20 |
| Author: Dirk Behme <dirk.behme@gmail.com> |
| Date: Wed Jan 16 14:26:59 2008 +0100 |
| |
| nand: Correct NAND erase percentage output |
| |
| For NAND erase sizes smaller than one NAND erase block, erase |
| percentage output becomes grater than 100% e.g. |
| |
| -- cut -- |
| > nand info |
| Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB |
| > nand erase 0x100000 0x2000 |
| NAND erase: device 0 offset 0x100000, size 0x2000 |
| Erasing at 0x100000 -- 200% complete. |
| OK |
| > |
| -- cut -- |
| |
| Correct this and give user a warning that more is erased than specified: |
| |
| -- cut -- |
| > nand erase 0x100000 0x2000 |
| NAND erase: device 0 offset 0x100000, size 0x2000 |
| Warning: Erase size 0x00002000 smaller than one erase block 0x00004000 |
| Erasing 0x00004000 instead |
| Erasing at 0x100000 -- 100% complete. |
| OK |
| > |
| -- cut -- |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit 5922db6c0948506be91e0de44e7a6863a18a417f |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Tue May 13 17:31:24 2008 +0200 |
| |
| Cleanup nand_info[] declaration. |
| |
| The nand_info array is declared as extern in several .c files. |
| Those days, nand.h contains a reference to the array, so there is |
| no need to declare it elsewhere. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 135f0a7488af2947adbe4b40b79280bdfe5e9886 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon May 19 09:30:43 2008 -0500 |
| |
| NAND: Provide a sane default for NAND_MAX_CHIPS. |
| |
| This allows the header to be included regardless of whether a board's |
| config file provides NAND-related defininitions. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit a8092c021d27f27f4b323b7d49979ca01b3fc19d |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon May 26 12:19:10 2008 +0200 |
| |
| avr32: Fix theoretical race in udelay() |
| |
| If the specified delay is very short, the cycle counter may go past the |
| "end" time we are waiting for before we get around to reading it. |
| |
| Fix it by checking the different between the cycle count "now" and the |
| cycle count at the beginning. This will work as long as the delay |
| measured in number of cycles is below 2^31. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 48ea623eae8674793372e3e7c95e72e5a44d7a95 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed May 21 13:01:09 2008 +0200 |
| |
| avr32: Compile atmel_mci.o conditionally |
| |
| Remove #ifdef CONFIG_MMC from the source file and use conditional |
| compilation in the Makefile instead. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu May 22 12:28:25 2008 +0200 |
| |
| avr32: Fix wrong error flags in atmel_mci driver |
| |
| Make sure we check for CRC errors when sending commands that use CRC |
| checking. |
| |
| Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed May 21 11:10:59 2008 +0200 |
| |
| avr32: Fix two warnings in atmel_mci.c |
| |
| The warnings are harmless but annoying. Let's fix them. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit a23e277c4a3a2bbc42d237aae29da3a8971e757f |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon May 19 11:36:28 2008 +0200 |
| |
| avr32: Rework SDRAM initialization code |
| |
| This cleans up the SDRAM initialization and related code a bit, and |
| allows faster booting. |
| |
| * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h |
| * Remove memory test from sdram_init() and make caller responsible |
| for verifying the SDRAM and determining its size. |
| * Remove base_address member from struct sdram_config (was sdram_info) |
| * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT |
| * Add support for a common STK1000 hack: 16MB SDRAM instead of 8. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 95107b7c028806919630bf02c653aa8f4f867c94 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Mon May 19 11:27:37 2008 +0200 |
| |
| avr32: Do stricter stack checking in the exception handler |
| |
| Don't do a stack dump if the stack pointer is outside the memory area |
| reserved for stack. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit caf83ea888a0220f41747d0b7748fa43b4a4bd49 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri May 2 15:32:57 2008 +0200 |
| |
| avr32: Use the same entry point for reset and exception handling |
| |
| Since the reset vector is always aligned to a very large boundary, we |
| can save a couple of KB worth of alignment padding by placing the |
| exception vectors at the same address. |
| |
| Deciding which one it is is easy: If we're handling an exception, the |
| CPU is in Exception mode. If we're starting up after reset, the CPU is |
| in Supervisor mode. So this adds a very minimal overhead to the reset |
| path (only executed once) and the exception handling path (normally |
| never executed at all.) |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 0c16eed2189a190bd5655b33c029f809a9b31128 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri May 2 15:24:22 2008 +0200 |
| |
| avr32: Put memset in its own section |
| |
| All C code is compiled with -ffunction-sections -fdata-sections. |
| Assembly functions should get their own sections as well so that |
| everything looks consistent. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Fri May 2 15:21:40 2008 +0200 |
| |
| avr32: Rename pm_init() as clk_init() and make SoC-specific |
| |
| pm_init() was always more about clock initialization than anything |
| else. Dealing with PLLs, clock gating and such is also inherently |
| SoC-specific, so move it into a SoC-specific directory. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 4f5972c3b2454c22957f2842cfe64ec8118e015b |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Apr 30 16:15:57 2008 +0200 |
| |
| avr32: Use new-style Makefile for the at32ap platform |
| |
| This makes it easier to avoid compiling certain files later. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Apr 30 14:36:47 2008 +0200 |
| |
| avr32: Remove unused file cpu/at32ap/pm.c |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Apr 30 14:19:28 2008 +0200 |
| |
| avr32: Clean up the HMATRIX code |
| |
| Rework the HMATRIX configuration interface so that it becomes easier |
| to configure the HMATRIX for boards with special needs, and add new |
| parts. |
| |
| The HMATRIX header file has been split into a general, |
| chip-independent part with register definitions, etc. and a |
| chip-specific part with SFR bitfield definitions and master/slave |
| identifiers. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 0a2e48792dd372c90b80059f3235e67a567e16fc |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu Nov 22 12:14:11 2007 +0100 |
| |
| avr32: Add support for the ATSTK1006 board |
| |
| This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on |
| board. It's currently in production and will be available soon. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Tue Apr 29 12:53:05 2008 +0200 |
| |
| avr32: Get rid of the .flashprog section |
| |
| The .flashprog section was only needed back when we were running |
| directly from flash, and it's even more useless on NGW100 since it |
| uses the CFI flash driver which never used this workaround in the |
| first place. |
| |
| Remove it on STK1000 as well, and get rid of all the associated code and |
| annotations. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit cdd42c0c7a5205fc380912d83229069a71ea3abf |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Wed Apr 30 13:09:56 2008 +0200 |
| |
| avr32: Use correct condition around macb clock accessors |
| |
| get_macb_pclk_rate() and get_macb_hclk_rate() should be available when |
| the chip has a MACB controller, not when it has a USART. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit f793a3581901ff39c2abb94012d9bbc8573ccf02 |
| Author: David Brownell <david-b@pacbell.net> |
| Date: Wed Apr 16 22:57:58 2008 -0700 |
| |
| avr32: Disable the AP7000 internal watchdog on startup |
| |
| This patch forces the watchdog off in all cases. That will at least |
| get rid of the constant reboot cycle, though it won't let the watchdog |
| actually run in the new kernels: its probe() comes up with a polite |
| warning. |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 55ac7a7490b55da56659f95d82a0c83b9756df27 |
| Author: David Brownell <david-b@pacbell.net> |
| Date: Fri Feb 22 12:54:39 2008 -0800 |
| |
| avr32: stk1002 and ngw100 convergence |
| |
| Make STK1002 and NGW100 boards act more alike: |
| - STK boards can use as many arguments as NGW |
| - STK boards don't need to manage FPGAs either |
| - NGW commands should match STK ones |
| |
| Also spell U-Boot right in prompts for STK1002 and NGW100. |
| |
| Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> |
| [haavard.skinnemoen@atmel.com: update STK100[34] as well] |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue May 27 13:47:00 2008 +0200 |
| |
| Socrates: Fix PCI bus frequency report |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 791e1dba8de76ad8e762a7badb869f224a1f8b82 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue May 27 11:49:13 2008 +0200 |
| |
| Socrates: Added USB support. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 5a904e5637cff1d708dc67098004f83ba9e84c54 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue May 27 11:35:02 2008 +0200 |
| |
| USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO |
| |
| In case of several PCI USB controllers on a board this variable |
| specifys which controller to use. |
| See doc/README.generic_usb_ohci for details. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 2f7468aeba60e1288030a8d007c4e63bd3f13221 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue May 27 10:36:07 2008 +0200 |
| |
| Socrates: add support for DS75 Digital Thermo Sensor on I2C bus. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 83e9d7a2614d4006b92690afa3390c291734267e |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Mon May 26 18:16:04 2008 +0200 |
| |
| Socrates: Config file cleanup. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 602cac1389b755b223272f2328a47e6f8c240848 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat May 24 12:47:46 2008 +0200 |
| |
| MAKEALL: add at91 list |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0 |
| Author: Ron Madrid <ron_madrid@sbcglobal.net> |
| Date: Fri May 23 15:37:05 2008 -0700 |
| |
| Add Marvell 88E1118 support for TSEC |
| |
| Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 557b377d8bfc8b833b6e749457bcdfa298331a24 |
| Author: Jens Gehrlein <sew_s@tqs.de> |
| Date: Mon May 5 14:06:11 2008 +0200 |
| |
| smc911x: add 16 bit support |
| |
| Signed-off-by: Jens Gehrlein <sew_s@tqs.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb |
| Author: Christian Eggers <ceggers@gmx.de> |
| Date: Wed May 21 21:29:10 2008 +0200 |
| |
| Fix endianess conversion in usb_ohci.c |
| |
| Sorry, I forgot this line: |
| |
| Signed-off-by: Christian Eggers <ceggers@gmx.de> |
| |
| I think this must be swapped (result may be equal). |
| |
| commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596 |
| Author: Christian Eggers <ceggers@gmx.de> |
| Date: Wed May 21 22:12:00 2008 +0200 |
| |
| USB: replace old swap_ with proper endianess conversion macros |
| |
| Signed-off-by: Christian Eggers <ceggers@gmx.de> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c |
| Author: Christian Eggers <ceggers@gmx.de> |
| Date: Wed May 21 21:29:10 2008 +0200 |
| |
| Fix endianess conversion in usb_ohci.c |
| |
| Signed-off-by: Christian Eggers <ceggers@gmx.de> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 477434c63c2ea5baa5c6c4e43500786f436511ff |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Thu May 22 01:15:53 2008 +0200 |
| |
| USB: add support for multiple PCI OHCI controllers |
| |
| Add new configuration variable CONFIG_PCI_OHCI_DEVNO. |
| In case of several PCI USB controllers on a board this variable |
| specifys which controller to use. |
| |
| Also add USB support for sokrates board. |
| |
| See doc/README.generic_usb_ohci for details. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 21 16:56:08 2008 +0200 |
| |
| Fix some whitespace issues |
| |
| introduced by 53677ef18 "Big white-space cleanup." |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4416603aeb06861b468b06a981e52c3ff805db7b |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon May 12 14:36:39 2008 -0500 |
| |
| Make ads5121 out-of-tree compiling safe |
| |
| Reuse the existing DIU driver in board/freescale/common. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit 0e1bad47cd345c76c91a64caf41011e431b62599 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon May 5 10:20:01 2008 -0500 |
| |
| Adding DIU support for Freescale 5121ADS |
| |
| Add DIU and cfb console support to FSL 5121ADS board. |
| |
| Use #define CONFIG_VIDEO in config file to enable fb console. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit a48ff68d235e671176f6b496c44246dbe5e0a93f |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon May 5 10:20:00 2008 -0500 |
| |
| Replace DPRINTF with debug |
| |
| Remove DPRINTF macro and replace it with generic debug macro. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon May 5 10:19:59 2008 -0500 |
| |
| Move pixel clock setting to board file |
| |
| The clock divider has different format in 5121 and 8610. This patch moves it to |
| board specific code. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit 53677ef18e25c97ac613349087c5cb33ae5a2741 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue May 20 16:00:29 2008 +0200 |
| |
| Big white-space cleanup. |
| |
| This commit gets rid of a huge amount of silly white-space issues. |
| Especially, all sequences of SPACEs followed by TAB characters get |
| removed (unless they appear in print statements). |
| |
| Also remove all embedded "vim:" and "vi:" statements which hide |
| indentation problems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Thu May 8 17:46:23 2008 +0200 |
| |
| socrates: fix second TSEC configuration (it is actually TSEC3) |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Thu May 8 14:17:08 2008 +0200 |
| |
| Fixed reset for socrates |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit e18575d5f589a62e19c70d471d4b4e27cad3af56 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Wed May 7 15:10:49 2008 +0200 |
| |
| socrates: changes to support FDT |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Wed Apr 30 11:42:50 2008 +0200 |
| |
| Initial support for "Socrates" board |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu May 8 15:46:42 2008 +0200 |
| |
| POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags. |
| |
| This way we become able to utilize the full post_log_word for POST |
| activities (overwise, POST ECC, which has 0x8000 ID, could be |
| erroneously treated as started in post_output_backlog() even if there |
| was actually no POST ECC run (because of OCM POST failure, for |
| example). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 7845d49094c81321021b50a4dbb8864d2f3777e4 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu May 8 15:46:02 2008 +0200 |
| |
| POST: mark OCM test as POST_STOP |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit 28a385065882d6cb6ac5f443311ff87887ed7c13 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu May 8 15:45:26 2008 +0200 |
| |
| POST: add POST_STOP flag |
| |
| Don't run futher tests in case of a test fails that is marked as |
| POST_STOP. |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit a525145d8110d15b4389d23c3ea8a78f22509d3f |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu May 8 15:44:16 2008 +0200 |
| |
| POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround) |
| |
| Switch the OCM testid with the codec one. The reason is that current |
| implementation requires the POST_ROM testid to fit into lower 16 |
| bits, and the codec test will never run with POST_ROM hopefully. |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu May 8 15:43:28 2008 +0200 |
| |
| lwmon5: enable OCM post test on lwmon5 board |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit 6e8ec682268493b8d098f99e17b1ce71b4448977 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu May 8 15:42:47 2008 +0200 |
| |
| POST: OCM test added. |
| |
| Added OCM test to POST layer. This version runs before all other tests |
| but doesn't yet interrupt post sequence on failure. |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 6891260bdd935a382c95d9fa333922b0dfded68a |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu May 8 15:40:39 2008 +0200 |
| |
| POST: typo fix |
| |
| Signed-off-by: Ilya Yanok <yanok@emcraft.com> |
| |
| commit 727f63334676e760877d43bfb8f0e9331ac8b101 |
| Author: Hebbar <gururajakr@sanyo.co.in> |
| Date: Tue May 20 02:16:36 2008 -0700 |
| |
| common/usb.c: fix incorrect escape sequence |
| |
| Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa |
| Author: York Sun <yorksun@freescale.com> |
| Date: Thu May 15 15:26:27 2008 -0500 |
| |
| Fix 8313ERDB board configuration |
| |
| Change LCRR clock ratio from 2 to 4 to commodate VSC7385. |
| Correct TSEC1 vs TSEC2 assignment. |
| Define ETHADDR and ETH1ADDR always. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 2c289e320dcfb3760e99cf1d765cb067194a1202 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon May 19 09:47:25 2008 -0500 |
| |
| mpc86xx: Removed unused and unconfigured memory test code. |
| |
| Besides, other common code exists. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 180a90abdae72587c0f679edf8991455e559440d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 19 12:47:11 2008 +0200 |
| |
| Release v1.3.3 |
| |
| Update CHANGELOG for release. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 16bedc661de0dae767b1377d8413373a3fbcfa79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon May 19 07:14:38 2008 +0200 |
| |
| ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection |
| |
| When SATA is selected (via jumper J6) we need to disable the first PCIe |
| node in the device tree, so that Linux doesn't initialize it. Otherwise |
| the Linux SATA driver will fail to detect the devices. |
| |
| The same goes the other way around too. So if PCIe is selected we need |
| to disable the SATA node in the device tree. |
| |
| This is because PCIe port 0 and SATA on 460EX share the same pins |
| (multiplexed) and we have to configure in U-Boot which peripheral is |
| enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3cc27b426aeefe2930f911692e9df3143fb2565f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:58 2008 +0200 |
| |
| i386: Fix multiple definitions of __show_boot_progress |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 311f3446930c1e64c12026c1cfd00500b05be52d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:57 2008 +0200 |
| |
| sc530_spunk: add missing SOBJS entry |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a559317143b4f95927b08cd388707e6f077e95fa |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:56 2008 +0200 |
| |
| sc520_spunk: Fix flash |
| |
| flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules |
| flash.c:398: error: label at end of compound statement |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 91f221317af64191ee8caf303ea9305943158691 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:49 2008 +0200 |
| |
| drivers/pcmcia: add missing i82365 |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit dd223944132f97ffa52977ea95e5a52428f5cc2f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:47 2008 +0200 |
| |
| i386/bootm: remove unused var |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a9da341df19b32ad2ecb58ce529f7e4fada7814e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 18 19:09:45 2008 +0200 |
| |
| example/gitignore: update with all generated examples |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a38dc3ea8614f8b0c41e432b445a9959b9711295 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu May 15 00:42:45 2008 +0200 |
| |
| TQM8272: fix out-of-tree building |
| |
| ...and add to MAKEALL script |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 14 23:34:53 2008 +0200 |
| |
| environment: fix bug introduced by commit a8409f4f1ac8 |
| |
| env_get_char is not a function, but a pointer to one. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Wed May 14 13:39:22 2008 +0200 |
| |
| ppc4xx: QUAD100HD: Allow the environment to be put into flash. |
| |
| After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also |
| use a redundant environment. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit cda2a4a9961fd4341b7db305cb22fc05957e8b77 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 14 13:55:30 2008 +0200 |
| |
| Fix config files for out-of-tree building |
| |
| Several board/<...>/config.mk files include dynamically built (by |
| the Makefile) config files but used the wrong file name of |
| $(TOPDIR)/board/$(BOARDDIR)/config.tmp |
| instead if the correct |
| $(OBJTREE)/board/$(BOARDDIR)/config.tmp |
| |
| The bug is nasty because the build result is correct for the (normal) |
| in-tree builds, and because 'sinclude' is used no errors get raised |
| even for out-of-tree build tests. But out-of-tree builds use an |
| incomplete and thus usually incorrect configuration... |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed May 14 13:40:03 2008 +0200 |
| |
| ppc4xx: Fix bogus Canyonlands config.mk |
| |
| This patch fixes the canyonlands config.mk file to enable correct |
| out-of-tree builds. Thanks to Wolfgang Denk for spotting this. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fdd1247a66d788a3446244f6fde9955a93c26322 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed May 14 10:32:32 2008 +0200 |
| |
| ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build |
| |
| Canyonlands has a file ddr2_fixed.c which needs special treatment when |
| building in separate directory. It has to be linked to build directory |
| otherwise it is not seen. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a8409f4f1ac84c36273c1a1e341189662521bcfb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 14 12:22:49 2008 +0200 |
| |
| environment: cleanup prototype declarations of env functions. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cf39b07948015c480b72a6e732cf7d839aa93a9e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 14 12:21:48 2008 +0200 |
| |
| linkstation_HGLAN: Fix out of tree building. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 085551c05ca09e6c491ea11a1c6727a36776a545 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed May 14 10:32:32 2008 +0200 |
| |
| ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build |
| |
| Canyonlands has a file ddr2_fixed.c which needs special treatment when |
| building in separate directory. It has to be linked to build directory |
| otherwise it is not seen. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1510b82d50615f344e89d42533e8224cce067dc0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue May 13 23:15:52 2008 +0200 |
| |
| Makefile: fix "error: version_autogenerated.h: No such file or directory" |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Tue May 13 17:31:24 2008 +0200 |
| |
| Cleanup nand_info[] declaration. |
| |
| The nand_info array is declared as extern in several .c files. |
| Those days, nand.h contains a reference to the array, so there is |
| no need to declare it elsewhere. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 70fab1908fc1734a403711eaabbef546bc4b77dc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue May 13 20:22:01 2008 +0200 |
| |
| ppc4xx: Add 405EX(r) revision C PVR definitions and detection code |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 12 01:11:21 2008 +0200 |
| |
| Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option" |
| |
| This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 |
| which broke many PowerPC boards. |
| |
| commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 12 00:56:28 2008 +0200 |
| |
| Revert "Avoid initrd and logbuffer area overlaps" |
| |
| This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888 |
| which breaks building on all PPC boards that don't use a log buffer. |
| |
| commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Sat May 10 14:02:04 2008 -0700 |
| |
| Fix offset calculation for multi-type legacy images. |
| |
| Calculation of tail was incorrect when size % 4 == 0. |
| |
| New code removes the conditional and does the same thing but with arithmetic |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| |
| commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 12 00:40:58 2008 +0200 |
| |
| Revert "Change env_get_char from a global function ptr to a function." |
| |
| This reverts commit c0559be371b2a64b1a817088c3308688e2182f93 |
| which is known to break booting from dataflash and NAND. |
| |
| commit 20e5ed137483823aaea5178169f3b144c7a4d9e0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 11 23:13:57 2008 +0200 |
| |
| API: remove duplicate syscall check |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 67e3beb52c320b0a31cf030716c99392cde2d532 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Fri May 9 21:46:51 2008 +0200 |
| |
| AT91: Cleanup unused config header file definitions. |
| |
| CONFIG_ENV_OVERWRITE is commented out in the config header files, |
| so let's cleanup the files by removing the whole definition. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 19883aede2ac0a522493bfb2b35a7dbb200071b1 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 14:52:34 2008 +0200 |
| |
| Support AT91CAP9 revC CPUs |
| |
| The AT91CAP9 revC CPU has a few differences over the previous, |
| revB CPU which was distributed in small quantities only (revA was |
| an internal Atmel product only). |
| |
| The revC silicon needs a special initialisation sequence to |
| switch from the internal (imprecise) RC oscillator to the |
| external 32k clock. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 098b7b4b441b12c2a64dd517930f43c793542759 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 14:52:33 2008 +0200 |
| |
| Use custom logo for Atmel boards |
| |
| This patch adds a custom vendor logo for the Atmel AT91 boards. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 761c70b80cdd3bead40146b96a8e713d6ae01632 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 14:52:32 2008 +0200 |
| |
| AT91SAM9RLEK: hook up the ATMEL LCD driver |
| |
| This patch makes the necessary adaptations (PIO configurations and |
| defines in config header file) to hook up the Atmel LCD driver to the |
| AT91SAM9RLEK board. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 14:52:31 2008 +0200 |
| |
| AT91SAM9263EK: hook up the ATMEL LCD driver |
| |
| This patch makes the necessary adaptations (PIO configurations and |
| defines in config header file) to hook up the Atmel LCD driver to the |
| AT91SAM9263EK board. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 820f2a958325061a446115f3035e48e4726b3390 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 14:52:30 2008 +0200 |
| |
| AT91SAM9261EK: hook up the ATMEL LCD driver |
| |
| This patch makes the necessary adaptations (PIO configurations and |
| defines in config header file) to hook up the Atmel LCD driver to the |
| AT91SAM9261EK board. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c139b17d20c8371c1e0a8d7fb27c11050cf86304 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 14:52:29 2008 +0200 |
| |
| AT91CAP9ADK: hook up the ATMEL LCD driver |
| |
| This patch makes the necessary adaptations (PIO configurations and |
| defines in config header file) to hook up the Atmel LCD driver to the |
| AT91CAP9ADK board. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 39cf480484fcce5c04a590ee1c30be0c17b02c34 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Fri May 9 21:57:18 2008 +0200 |
| |
| Add ATMEL LCD driver |
| |
| This patch adds support for the ATMEL LCDC driver which is used on some |
| AT91 and AVR platforms. |
| |
| Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and |
| AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2118ebb44dc40f8117c94950fd95799a9ef821b2 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 18:52:25 2008 +0200 |
| |
| AT91SAM9RLEK support |
| |
| This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK |
| board. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8e429b3eee23927c1222679f6b6f53667b21595c |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 18:52:23 2008 +0200 |
| |
| AT91SAM9263EK support |
| |
| This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK |
| board. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d99a8ff66d8ae87e5c87590ed2e4ead629540607 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:22 2008 +0200 |
| |
| AT91SAM9261EK support |
| |
| This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK |
| board. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 86c8c8a414988c50104a3b02c29f50af2be738c0 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:21 2008 +0200 |
| |
| AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND |
| |
| This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND |
| in order to cope with the changes in DataFlash partitionning scheme |
| (cset c3a60cb3). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 96996ac25d5222611a8888968db6e53a6d3726da |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:20 2008 +0200 |
| |
| AT91SAM9260EK: Normalize BOOTARGS |
| |
| This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from |
| DataFlash or from NAND), and gives to Linux a fully specified mtdparts |
| variable. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:19 2008 +0200 |
| |
| AT91SAM9260EK: Normalize SPI timings |
| |
| This patch changes the SPI timings to closely match the ones |
| used by the Linux kernel and the Atmel's own bootstrap project. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:18 2008 +0200 |
| |
| AT91SAM9260EK: Handle 8 or 16 bit NAND |
| |
| The Atmel boards can handle 8 or 16 bit NAND memories. This patch |
| makes the support configurable in the board config header file |
| (CFG_NAND_DBW_8 or CFG_NAND_DBW_16). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit ab52640fc01624e208424e527af0b7b3a5a65a12 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:17 2008 +0200 |
| |
| AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND |
| |
| This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND |
| in order to cope with the changes in DataFlash partitionning scheme |
| (cset c3a60cb3). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:16 2008 +0200 |
| |
| AT91CAP9ADK: Normalize BOOTARGS |
| |
| This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from |
| DataFlash or from NAND), and gives to Linux a fully specified mtdparts |
| variable. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 93da48b910511911ce110656e17ed733c8ac4c45 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:15 2008 +0200 |
| |
| AT91CAP9ADK: Normalize SPI timings |
| |
| This patch changes the SPI timings to closely match the ones |
| used by the Linux kernel and the Atmel's own bootstrap project. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:14 2008 +0200 |
| |
| AT91CAP9ADK: Handle 8 or 16 bit NAND |
| |
| The Atmel boards can handle 8 or 16 bit NAND memories. This patch |
| makes the support configurable in the board config header file |
| (CFG_NAND_DBW_8 or CFG_NAND_DBW_16). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 11b162bae058e96c7929e358d4adff2bee6c2cc4 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:13 2008 +0200 |
| |
| Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms |
| |
| All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch |
| below avoids the duplication of u-boot.lds by putting the file in the |
| cpu directory instead of the board one. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:12 2008 +0200 |
| |
| Add proper copyright notices in Atmel boards Makefiles |
| |
| The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete |
| copyright notice. This patch adds the missing pieces. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e817a042cef6164bf26fee86f90326f2ec9e6745 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:11 2008 +0200 |
| |
| Add copyright information in Atmel boards partition.c |
| |
| When Ulf did the dataflash.c cleanup, he didn't add his copyright on |
| the new created files. This patch fixes the problem. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 20:52:10 2008 +0200 |
| |
| Update origin and copyright information in arch-at91sam9 header files |
| |
| When doing the AT91CAP9/AT91SAM9 port, a number of header files were |
| copied from the Linux kernel sources. This patch explicitly specifies |
| this origin for all the copied headers, and for those missing copyright |
| information, adds it. |
| |
| Additionaly, the header file 'at91sam926x_mc.h' has been superceeded |
| in the latest kernel sources by 'at91sam9_smc.h'. |
| |
| The copyright information has been confirmed by the AT91 Linux kernel |
| maintainer, Andrew Victor <avictor.za@gmail.com>. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 79dd1712689d6a5031d7cbff54957049680751c7 |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Thu May 8 16:00:55 2008 +0200 |
| |
| ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config |
| |
| When using dhcp/bootp the "netmask" environment variable is not set |
| because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is |
| desireable, so the following patch adds this this option to the board |
| config. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 869d14b4cc2e47de2ddcb117bad0407a44436684 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat May 10 10:30:36 2008 +0200 |
| |
| ppc4xx: Update Makalu defconfig to use device-tree booting as default |
| |
| This patch reworks the default environment on Makalu. Now "net_nfs" for |
| example uses the device-tree style booting formerly know as "net_nfs_fdt". |
| Also the addresses in RAM were changed because of the new image booting |
| support, which check for image overwriting. So the addresses needed to |
| get adjusted. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f3612a7b199cab3942f60d9c1392eb39d58cc699 |
| Author: Becky Bruce <bgill@freescale.com> |
| Date: Wed May 7 13:28:16 2008 -0500 |
| |
| PPC: fix map_physmem build warning |
| |
| map_physmem currently generates a warning when CONFIG_PHYS_64BIT is |
| enabled. This quiets the warning. |
| |
| Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com> |
| |
| commit 36f32675f40292002ee1fed252c180a43022d2d4 |
| Author: Becky Bruce <bgill@freescale.com> |
| Date: Wed May 7 13:24:57 2008 -0500 |
| |
| Update pci code to use phys_addr_t |
| |
| Physical addrs need to be represented by phys_addr_t, not |
| unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT |
| are going to fail mightily. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 91a616741fc128cdb88f39bddcd4d72fe17466d0 |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Thu May 8 22:32:22 2008 -0700 |
| |
| Support legacy multi-type images without FDT section. |
| |
| This patch enables legacy multi-type images containing only a Linux kernel |
| and root file system to be loaded, maintaining compatibility with previous |
| versions of u-boot. |
| |
| This is required when using old image files such as a Linux 2.4 kernel / |
| filesystem. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 881031d9732783b7aeae2198fc7eb480ae8974a6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 10 00:38:02 2008 +0200 |
| |
| Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 10 00:36:09 2008 +0200 |
| |
| post/cpu/ppc4xx/Makefile: line length cleanup |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 22:52:09 2008 +0200 |
| |
| Fix @ -> <at> substitution |
| |
| When applying the AT91CAP9 patches upstream, something transformed |
| the '@' character into the ' <at> ' sequence. |
| |
| The patch below restores the original form in all the places where |
| it has been modified (the AT91CAP9 files, the AT91SAM9260 files which |
| were copied from AT91CAP9, and a couple of other files where the |
| ' <at> ' sequence was present). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 9606b3c81b3c47a1d58514e9a232c6f461a17597 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 22:52:10 2008 +0200 |
| |
| Update origin and copyright information in arch-at91sam9 header files |
| |
| When doing the AT91CAP9/AT91SAM9 port, a number of header files were |
| copied from the Linux kernel sources. This patch explicitly specifies |
| this origin for all the copied headers, and for those missing copyright |
| information, adds it. |
| |
| Additionaly, the header file 'at91sam926x_mc.h' has been superceeded |
| in the latest kernel sources by 'at91sam9_smc.h'. |
| |
| The copyright information has been confirmed by the AT91 Linux kernel |
| maintainer, Andrew Victor <avictor.za@gmail.com>. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 22:52:11 2008 +0200 |
| |
| Add copyright information in Atmel boards partition.c |
| |
| When Ulf did the dataflash.c cleanup, he didn't add his copyright on |
| the new created files. This patch fixes the problem. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu May 8 10:09:27 2008 +0200 |
| |
| mx31ads: fix 32kHz clock handling |
| |
| According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz |
| oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value. |
| Also fix a typo when verifying a jumper configuration. While at it, make |
| two needlessly global functions static. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 1b5605ca57fbb364f4d78eeee28b974ed875e888 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed May 7 13:10:04 2008 +0200 |
| |
| Avoid initrd and logbuffer area overlaps |
| |
| Add logbuffer to reserved LMB areas to prevent initrd allocation |
| from overlaping with it. |
| |
| Make sure to use correct logbuffer base address. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed May 7 13:08:54 2008 +0200 |
| |
| ppc: Cleanup get_effective_memsize() use |
| |
| Removed duplicated effective memory size calculation code. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 273c37d843d5b581090378016cd12dd9c586907b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed May 7 09:03:53 2008 +0200 |
| |
| Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled |
| |
| Recent modifcations to LOGBUFFER handling code were incorrecly |
| introduced to fit_check_kernel() routine during |
| "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing", |
| commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f. |
| |
| This patch cleans up this merge issue. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit bc11756daff89a3de09ca80adac962b88cf06e6e |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Tue May 6 20:16:15 2008 -0700 |
| |
| Propagate Error Status to the Shell on fw_printenv Errors |
| |
| Changed implementation such that fw_printenv returns failure status |
| when one or more specified variables do not exist or when incorrect |
| command syntax is used. |
| |
| This aids scripting fw_printenv such that the script can key of the |
| return status rather than relying on standard error "scraping". |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6 |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Tue May 6 16:18:00 2008 -0700 |
| |
| Fix Compilation Errors with 'tools/env/fw_printenv' |
| |
| In the current top-of-tree, 1.3.3.-rc2, the optional tool |
| 'tools/env/fw_printenv' fails to compile for two reasons: |
| |
| 1) The header watchdog.h cannot be found. |
| 2) The header zlib.h is picked up from the tool chain rather than the |
| project causing a prototype conflict for crc32. |
| |
| This patch addresses both of these issues. |
| |
| Platforms Tested On: |
| - AMCC "Kilauea" |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| |
| commit 597f6c26a18b389903a64692bacbf9a1ca69355b |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Mon May 5 10:22:53 2008 -0500 |
| |
| Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating |
| |
| When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't |
| work before relocating to RAM because command history is written into |
| a global array that is not writable before relocation. This patch |
| defers to the no-editing and no-history code in readline_into_buffer() |
| if it is called before relocation. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 726c0f1e5f108dccea052965123b95837d2bd402 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Mon May 5 16:11:22 2008 +0200 |
| |
| cosmetic: Adjust coding style for switch statements to be consistent |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 574b319512b13e10800f0045e39b993f4ca25e42 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Mon May 5 16:11:21 2008 +0200 |
| |
| Fix disk type output in disk/part.c |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171 |
| Author: Vlad Lungu <vlad.lungu@windriver.com> |
| Date: Mon May 5 14:20:03 2008 +0300 |
| |
| Mail address change, documentation modified |
| |
| Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com> |
| |
| commit 4d49b28038e2819088e8356a77212fc95a89ce5a |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun May 4 15:42:41 2008 +0200 |
| |
| microblaze: Repare intc handling |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 878b3b1e193e570caf3e96ad8e31e561f68d0287 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun May 4 15:17:52 2008 +0200 |
| |
| include/gitignore: update to all architectures |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1df368aed3b8bc240fe1595d290b0e91b22961da |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Mon May 5 02:12:06 2008 +0200 |
| |
| ide: Remove spurious second include of io.h |
| |
| Removed the second include, with all the #ifdef around as suggested by Wolfgang. |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c |
| Author: Adrian Filipi <adrian.filipi@eurotech.com> |
| Date: Tue May 6 16:46:37 2008 -0400 |
| |
| Fix some typos |
| |
| This patch fixes three typos. |
| The first is a repetition of CONFIG_CMD_BSP. |
| The second makes the #endif comment match its #if. |
| The third is a spelling error. |
| |
| Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com> |
| |
| commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb |
| Author: Grant Erickson <gerickson@nuovations.com> |
| Date: Sun May 4 16:45:01 2008 -0700 |
| |
| Recognize 'powerpc' As an Alias for IH_ARCH_PPC |
| |
| Add support for the recognition of 'powerpc' as an alias for the PowerPC |
| architecture type since Linux is already trending in that direction, |
| preferring 'powerpc' to 'ppc'. |
| |
| Signed-off-by: Grant Erickson <gerickson@nuovations.com> |
| |
| commit f5a24259190c388c2527bdc49fee34577d862cc7 |
| Author: Wheatley Travis <Travis.Wheatley@freescale.com> |
| Date: Fri May 2 13:35:15 2008 -0700 |
| |
| 7450 and 86xx L2 cache invalidate bug corrections |
| |
| The 7610 and related parts have an L2IP bit in the L2CR that is |
| monitored to signal when the L2 cache invalidate is complete whereas the |
| 7450 and related parts utilize L2I for this purpose. However, the |
| current code does not account for this difference. Additionally the 86xx |
| L2 cache invalidate code used an "andi" instruction where an "andis" |
| instruction should have been used. |
| |
| This patch addresses both of these bugs. |
| |
| Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com> |
| Acked-By: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri May 9 10:16:13 2008 +0200 |
| |
| Avoid infinite loop "Generating include/autoconf.mk" |
| |
| Fix a bogus circular dependency that caused an infinite loop of |
| "Generating include/autoconf.mk" again and again. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 567fb852178dbf59529d7301620a3f3732a4b02d |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu May 8 22:52:09 2008 +0200 |
| |
| Fix @ -> <at> substitution |
| |
| When applying the AT91CAP9 patches upstream, something transformed |
| the '@' character into the ' <at> ' sequence. |
| |
| The patch below restores the original form in all the places where |
| it has been modified (the AT91CAP9 files, the AT91SAM9260 files which |
| were copied from AT91CAP9, and a couple of other files where the |
| ' <at> ' sequence was present). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 73ccb3410a0785593cda7aee455dfc51f790e281 |
| Author: Gary Jennejohn <gary.jennejohn@freenet.de> |
| Date: Mon Apr 28 14:04:32 2008 +0200 |
| |
| ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ef2642625cbfb1c3695e3478d08ae515052a4950 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 8 11:10:46 2008 +0200 |
| |
| ppc4xx: Kilauea: Fix incorrect FPGA FIFO address |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a00eccfebc954ad9485161efeca7d9aaf626d530 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 8 11:05:15 2008 +0200 |
| |
| ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards |
| |
| This patch adds fdt (flattened device tree) support to all remaining AMCC |
| eval boards. Most newer boards already support device tree. With this patch, |
| all AMCC boards now enable device tree passing from U-Boot to Linux |
| arch/powerpc kernels. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 8 11:01:09 2008 +0200 |
| |
| ppc4xx: Add weak default ft_board_setup() routine |
| |
| This patch adds a default ft_board_setup() routine to the 4xx fdt code. |
| This routine is defined as weak and can be overwritten by a board specific |
| one if needed. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 8 10:48:58 2008 +0200 |
| |
| ppc4xx: acadia: Add fdt support and fix section overlap problem |
| |
| This patch adds fdt (flattened device tree) support to the AMCC |
| Acadia eval board. This increases the image size and it doesn't |
| fit anymore into 256kByte. Since we didn't want to remove features |
| from the configuration, we decided to increase the U-Boot image size |
| (add one flash sector). |
| |
| Also changed the default environment definition to make it |
| independent of such changes. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4adb3023de75bc150f088c8935db340930ad38c8 |
| Author: Ira Snyder <iws@ovro.caltech.edu> |
| Date: Tue Apr 29 11:18:54 2008 -0700 |
| |
| ppc4xx: Add device tree support to AMCC Yosemite |
| |
| Add support for booting with a device tree blob. This is needed to boot |
| ARCH=powerpc kernels. Also add support for setting the eth0 mac address |
| via the ethaddr variable. |
| |
| Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b |
| Author: Dave Mitchell <dmitchell@amcc.com> |
| Date: Wed May 7 09:00:23 2008 -0700 |
| |
| ppc4xx: Fix typos in 460GT/EX FBDV array |
| |
| Corrected two typos in the 460GT/EX FBDV array. |
| |
| Signed-off-by: Dave Mitchell <dmitchell@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 66f5fa9263629271edc86178b1f224e3c9aab2b3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed May 7 16:54:31 2008 -0500 |
| |
| 85xx: Limit CPU2 workaround to parts that have the errata |
| |
| Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a5fe514e8ace564300d2c1d73846ddff49654243 |
| Author: Lee Nipper <lee.nipper@freescale.com> |
| Date: Fri Apr 25 15:44:45 2008 -0500 |
| |
| mpc83xx: system performance settings for MPC8349EMDS. |
| |
| These same settings are used on MPC8349ITX, and |
| improve performance on MPC8349EMDS. |
| |
| Signed-off-by: Lee Nipper <lee.nipper@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 49387dba910e485640b575e920ee463b7e611dc3 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue May 6 13:22:52 2008 +0900 |
| |
| [MIPS] cpu/mips/cache.S: Fix build warning |
| |
| Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0), |
| warns illegal global symbol references by bal (and jal also) instruction. |
| This does not happen with the latest binutils v2.18. |
| |
| Here's an example on gth2_config: |
| |
| mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy |
| stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k |
| c -EB -c -o cache.o cache.S |
| cache.S: Assembler messages: |
| cache.S:243: Warning: Pretending global symbol used as branch target is local. |
| cache.S:250: Warning: Pretending global symbol used as branch target is local. |
| |
| In principle, gas might be sensitive to global symbol references in PIC |
| code because they should be processed through GOT (global offset table). |
| But if `bal' instruction is used, it results in PC-based offset jump. |
| This is the cause of this warning. |
| |
| In practice, we know it doesn't matter whether PC-based reference or GOT- |
| based. As for this case, both will work before/after relocation. But let's |
| fix the code. |
| |
| This patch explicitly sets up a target address, then jump there. |
| Here's an example of disassembled code with/without this patch. |
| |
| 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20> |
| 9000066c: ac80fffc sw zero,-4(a0) |
| 90000670: 01402821 move a1,t2 |
| -90000674: 0411ffba bal 90000560 <mips_init_icache> |
| -90000678: 01803021 move a2,t4 |
| -9000067c: 01602821 move a1,t3 |
| -90000680: 0411ffcc bal 900005b4 <mips_init_dcache> |
| -90000684: 01a03021 move a2,t5 |
| -90000688: 03000008 jr t8 |
| -9000068c: 00000000 nop |
| +90000674: 01803021 move a2,t4 |
| +90000678: 8f8f83ec lw t7,-31764(gp) |
| +9000067c: 01e0f809 jalr t7 |
| +90000680: 00000000 nop |
| +90000684: 01602821 move a1,t3 |
| +90000688: 01a03021 move a2,t5 |
| +9000068c: 8f8f81e0 lw t7,-32288(gp) |
| +90000690: 01e0f809 jalr t7 |
| +90000694: 00000000 nop |
| +90000698: 03000008 jr t8 |
| +9000069c: 00000000 nop |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3 |
| Author: Vlad Lungu <vlad.lungu@windriver.com> |
| Date: Mon May 5 14:04:00 2008 +0300 |
| |
| Allow building mips versions with ELDK 3.1.1 |
| |
| .gpword works only with local symbols on certain binutils versions |
| |
| Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com> |
| |
| commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 5 12:52:36 2008 +0200 |
| |
| MAKEALL: add inka4x0 board |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b83dcc13ae7b2dab394bfef6f699750d11490ee2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun May 4 21:34:23 2008 +0200 |
| |
| kb9202 board: fix build problem. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun May 4 12:10:33 2008 +0200 |
| |
| Prepare for v1.3.3-rc3 |
| |
| Update ChNAGELOG, minor white space cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7c0773fde6100b61be2558cb5d8c442a3194aecb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun May 4 00:35:15 2008 +0200 |
| |
| drivers/net/tsec.c: Fix typo. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit aa737945e6f37a5de5dbad550a7694e0cb2a8120 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Fri May 2 21:45:12 2008 -0400 |
| |
| version_autogenerated.h: use printf rather than echo -n |
| |
| Some systems are dumb and do not implement the -n flag to echo (like OS X). |
| Convert the Makefile to use printf as this should work everywhere. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4acc2a108ad0a669165924704a6cb083f9138242 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Fri May 2 18:17:50 2008 -0400 |
| |
| fix building when saveenv is disabled in some setups |
| |
| If you enable environment in the flash, but disable the embedded |
| option, and you disable the saveenv command, then the #if nested |
| logic will trigger a compile failure: |
| env_flash.c: In function 'env_relocate_spec': |
| env_flash.c:399: error: 'flash_addr' undeclared (first use in this function) |
| The fix is to add CMD_SAVEENV ifdef protection like everywhere else. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7 |
| Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com> |
| Date: Fri May 2 16:10:04 2008 -0400 |
| |
| SBC8548: fix address mask to allow 64M flash |
| |
| Fix incorrect mask to enable all 64MB of onboard flash. |
| Previously U-Boot incorrectly mapped only 8MB of flash, this |
| patch correctly maps all the available flash. |
| |
| Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com> |
| |
| commit 3648085c464c8c22ef76fab006ca4344d3796124 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri May 2 19:48:56 2008 +0200 |
| |
| qemu_mips: add README |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6fdd002689190a0022c7b3dbab37fcba724580ce |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Fri May 2 02:35:59 2008 +0200 |
| |
| Fix misspelled comment |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu May 1 04:13:05 2008 -0400 |
| |
| mkimage: make mmap() checks consistent |
| |
| The mmap() related code is full of inconsistent casts/constants when |
| it comes to error checking, and may break when building on some |
| systems (like ones that do not implicitly define the caddr_t type). |
| Let's just avoid the whole mess by writing the code nice and clean in |
| the first place. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Thu May 1 09:05:34 2008 +0200 |
| |
| Fix defined but not used build warning |
| |
| - warning: 'srom' defined but not used |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit b71190f3250aaffcc81c35f6cfd3498cb7c48013 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Thu May 1 09:05:26 2008 +0200 |
| |
| Fix implicit declaration build warnings |
| |
| - warning: implicit declaration of function ‘serial_initialize’ |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 9acde129cc3f9c1b3bc11a821480dd446774d618 |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Tue Apr 29 19:18:32 2008 +0200 |
| |
| TSEC: add config options for VSC8601 RGMII PHY |
| |
| The Vitesse VSC8601 RGMII PHY has internal delay for both Rx |
| and Tx clock lines. They are configured using 2 bits in extended |
| register 0x17. |
| Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have |
| been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| Acked-by: Ben Warren <biggerbadderben@gmail.com> |
| -- |
| |
| drivers/net/tsec.c | 6 ++++++ |
| drivers/net/tsec.h | 3 +++ |
| 2 files changed, 9 insertions(+), 0 deletions(-) |
| |
| commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 3 23:07:15 2008 +0200 |
| |
| Revert "ColdFire: Get information from the correct GCC" |
| |
| This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a |
| (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40). |
| |
| commit c4e5f52a58d278eebb87f476e353972c5dacea40 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 3 22:25:00 2008 +0200 |
| |
| config.mk: use correct (cross) compiler |
| |
| Some config.mk files reference $(CC) to test for specific tool chain |
| features, so make sure $(CC) gets set before including any such |
| config files. |
| |
| This patch replaces commit b7166e05a5 ("ColdFire: Get information from |
| the correct GCC"). |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 27c38689d0cfde0e444239345f97b5eecc9f4067 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu May 1 02:13:44 2008 +0200 |
| |
| pxa: fix previous definition on cpu init |
| |
| start.S:183:1: warning: "ICMR" redefined |
| In file included from start.S:33: |
| include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition |
| start.S:187:1: warning: "RCSR" redefined |
| ... |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6d12e697de794d700767f22f950e3026ccf4daf6 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu May 1 02:13:43 2008 +0200 |
| |
| pxa: fix pcmcia operation on 'i' may be undefined |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Apr 30 16:24:35 2008 -0500 |
| |
| MPC8610HPCD: Drop -O2 from the build flags |
| |
| Make the flags use -Os like all other boards |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 30 15:50:39 2008 +0200 |
| |
| RTC: Fix month offset by one problem in M41T62 RTC driver |
| |
| This patch fixes a problem with the month being read and written |
| incorrectly (offset by one). This only gets visible by also using |
| the Linux driver (rtc-m41t80). |
| |
| Tested on AMCC Canyonlands. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 141ba1cad8e6598a2466e7e2976c6a12285df619 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat May 3 13:51:44 2008 +0900 |
| |
| [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker |
| |
| Current trick to pick up GNU assembler minor version uses a dot(.) as a |
| delimiter, and take the second field to obtain minor version number. But |
| as can be expected, this doesn't work with a version string which has |
| dots more than needs. |
| |
| Here's an example: |
| |
| $ mips-linux-gnu-as --version | grep 'GNU assembler' |
| GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215 |
| $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2 |
| 2-129) 2 |
| $ |
| |
| This patch restricts the version format to 2.XX.XX... This will work |
| in most cases. |
| |
| $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' |
| 2.18.50.20080215 |
| $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2 |
| 18 |
| $ |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit ea638951acead7f1086c908c0b9f086beab82a22 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat May 3 13:51:28 2008 +0900 |
| |
| [MIPS] cpu/mips/cache.S: Add dcache_enable |
| |
| Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482, |
| "allow ports to override bootelf behavior") requires ports to have this |
| function. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d2c6fbec4397c936b18cd42482b6973cd6781bdf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu May 1 21:30:16 2008 +0200 |
| |
| onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts |
| |
| Onenand needs a version of memcpy() which performs 16 bit accesses |
| only; make sure the name does not conflict with the standard |
| function. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 12bc4e94251c369c529ffa505cf58b148c372f7f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 30 22:38:17 2008 +0200 |
| |
| cmd_nand: fix warning: str2long ncompatible pointer type |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Apr 4 11:16:11 2008 -0500 |
| |
| Fix calculation of I2C clock for some 86xx chips |
| |
| Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2. |
| There is no pattern that can be used to determine which chips use which |
| frequency, so the only way to determine is to look up the actual SOC |
| designation and use the right value for that SOC. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Apr 30 12:11:19 2008 -0500 |
| |
| ColdFire: Fix ethernet hang issue for mcf547x_8x |
| |
| The ethernet hang is caused by receiving buffer in DRAM is not |
| yet ready due to access cycles require longer time in DRAM. |
| Relocate DMA buffer descriptors from DRAM to internal SRAM. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Apr 30 12:10:47 2008 -0500 |
| |
| ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c |
| |
| Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b7166e05a513c0806b63b9dfb6f1d77645cede2a |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Apr 30 12:10:23 2008 -0500 |
| |
| ColdFire: Get information from the correct GCC |
| |
| Signed-off-by: Kurt Mahan <kmahan@freescale.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9 |
| Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com> |
| Date: Wed Apr 30 18:02:59 2008 +0200 |
| |
| Fix warning in env_nand.c if compiled for DaVinci Schmoogie |
| |
| Fix warnings |
| |
| nv_nand.c: In function 'saveenv': |
| env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type |
| env_nand.c: In function 'env_relocate_spec': |
| env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type |
| |
| if compiled for davinci_schmoogie_config. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| Ack by: Sergey Kubushyn <ksi@koi8.net> |
| |
| commit 33a4a70d48d622cc4950c60a84fec23b9421f23e |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Apr 30 13:34:40 2008 +0200 |
| |
| Fix warnings while compiling net/net.c for MPC8610HPCD board |
| |
| MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS |
| causing overriding default -Os option. New gcc (ver. 4.2.2) |
| produces warnings while compiling net/net.c file with -O2 |
| option. The patch is an attempt to fix this. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 58b575e575c25fdf8c88141e145db201f3092149 |
| Author: Sascha Laue <Sascha.Laue@gmx.biz> |
| Date: Wed Apr 30 15:23:38 2008 +0200 |
| |
| lwmon5: fix offset error in sysmon0 POST |
| |
| Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e7419b243a373de4ee042f7d4f45f66de787240d |
| Author: Sascha Laue <Sascha.Laue@gmx.biz> |
| Date: Wed Apr 30 15:16:35 2008 +0200 |
| |
| lwmon5: fix manual merge error in POST |
| |
| Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> |
| |
| commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 30 17:46:26 2008 +0200 |
| |
| cmd_nand.c: fix another 'incompatible pointer type' warning. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit de109d909707e2dfe806be5efc3cdb103b47c8ad |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 30 17:25:07 2008 +0200 |
| |
| Makefile: fix parallel builds |
| |
| This problem shows up with parallel builds only; it results in |
| somewhat cryptic error messages like |
| |
| $ JOBS=-j6 MAKEALL netstar |
| Configuring for netstar board... |
| arm-linux-ld: cannot find -lgeneric |
| make[1]: *** [eeprom.srec] Error 1 |
| |
| A few boards (like netstar and voiceblue) need some libraries for |
| building; however, the board Makefile does not contain any such |
| dependencies which may cause problems with parallel builds. Adding |
| such dependencies is difficult as we would also have to provide build |
| rules, which already exist in the respective library Makefiles. |
| |
| To solve this, we make sure that all libraries get built before the |
| board code. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 30 14:51:36 2008 +0200 |
| |
| ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module |
| |
| This patch changes the Canyonlands/Glacier fixed DDR2 controller setup |
| used for NAND booting to match the values needed for the new 512MB |
| DIMM modules shipped with the productions boards: |
| |
| Crucial: CT6464AC667.8FB |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ea9202a659dc75996facf1475f1866a19a9d3129 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 30 10:49:43 2008 +0200 |
| |
| ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c |
| |
| This patch fixes a problem with DIMMs that have 8 banks. Now the |
| MCIF0_MBxCF register will be setup correctly for this setup too. |
| |
| This was noticed with the 512MB DIMM on Canyonlands/Glacier. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 76617299358ebba260ecc02d33e8e75d8d13dd3b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Apr 29 23:41:06 2008 +0200 |
| |
| Prepare v1.3.3-rc2, again. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b7fcc4c13993782342cf5cd20d237a6281648a0b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Apr 29 23:35:24 2008 +0200 |
| |
| Prepare v1.3.3-rc2 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Apr 29 23:32:20 2008 +0200 |
| |
| common/env_nand.c: fix one more incompatible pointer type issue |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Apr 29 21:33:08 2008 +0200 |
| |
| post/board/lwmon5/sysmon.c: fix manual merge error. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Apr 29 12:54:59 2008 -0500 |
| |
| 85xx: Add -mno-spe to e500/85xx builds |
| |
| Newer gcc's might be configured to enable autovectorization by default. |
| If we happen to build with one of those compilers we will get SPE |
| instructions in random code. |
| |
| -mno-spe disables the compiler for automatically generating SPE |
| instructions without our knowledge. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Apr 29 10:18:34 2008 -0500 |
| |
| Update .gitignore for zlib.h |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 45239cf4152109caa925145ccd433529902df887 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Apr 29 10:27:08 2008 -0500 |
| |
| 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs |
| |
| All the 85xx and 86xx UM describe the register as timing_cfg_3 |
| not as ext_refrec. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ef7d30b14394e4c4a153118f5845760cadada02a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Apr 29 10:28:34 2008 -0500 |
| |
| 85xx/86xx: Rename DDR init address and init extended address register |
| |
| Rename init_addr and init_ext_addr to match the docs between |
| 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit cf6cc014270549684873a5972d2595052c468cb6 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Apr 28 02:24:04 2008 -0500 |
| |
| 85xx: Additional fixes and cleanup of MP code |
| |
| * adjust __spin_table alignment to match ePAPR v0.94 spec |
| * loop over all cpus when determing who is up. This fixes an issue if |
| the "boot cpu" isn't core0. The "boot cpu" will already be in the |
| cpu_up_mask so there is no harm |
| * Added some protection in the code to ensure proper behavior. These |
| changes are explicitly needed but don't hurt: |
| - Added eieio to ensure the "hot word" of the table is written after |
| all other table updates have occurred. |
| - Added isync to ensure we don't prefetch loading of table entries |
| until we a released |
| |
| These issues we raised by Dave Liu. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b2d527a8b9fb50afccbaf79b5540952585cdc760 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Tue Apr 29 15:06:41 2008 +0200 |
| |
| lwmon5: minor clean-up to include/configs/lwmon5.h |
| |
| LWMON5 DSPIC POST uses the watch-dog scratch register. So, make |
| the CFG_DSPIC_TEST_ADDR definition more readable. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit f4c4d21a885ccc222fd0acdf653b683249e85117 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 29 16:08:05 2008 +0200 |
| |
| ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Tue Apr 29 13:32:45 2008 +0200 |
| |
| ppc flush_cache: add watch-dog triggering into the loops. |
| |
| Some boards (e.g. lwmon5) need rather a frequent watch-dog |
| kicking. Since the time it takes for the flush_cache() function |
| to complete its job depends on the size of data being flushed, one |
| may encounter watch-dog resets on such boards when, for example, |
| download big files over ethernet. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit cab99d6f3281ab6784feccf98b9b425daa58418a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 29 14:44:54 2008 +0200 |
| |
| ppc4xx: Fix compilation warning in denali_spd_ddr2.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 29 14:12:07 2008 +0200 |
| |
| ppc4xx: Fix Katmai CFG_MONITOR_LEN |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 29 13:57:07 2008 +0200 |
| |
| ppc4xx: Complete remove bogus dflush() |
| |
| Since the current dflush() implementation is know to have some problems |
| (as seem on lwmon5 ECC init) this patch removes it completely and replaces |
| it by using clean_dcache_range(). |
| |
| Tested on Katmai with ECC DIMM. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 29 13:36:51 2008 +0200 |
| |
| ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range() |
| |
| As it seems the "old" ECC initialization routine by using dflush() didn't |
| write all lines in the dcache back to memory on lwmon5. This could lead |
| to ECC error upon Linux booting. This patch changes the program_ecc() |
| routine to now use clean_dcache_range() instead of dflush(). |
| clean_dcache_range() uses dcbst which is exactly what we want in this |
| case. |
| |
| Since dflush() is known is cause problems, this routine will be |
| removed completely and replaced by clean_dcache_range() with an |
| additional patch. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Apr 28 18:19:34 2008 +0200 |
| |
| POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit eea5a743a2193ef2a05b9bc6dc447ba241416f35 |
| Author: Markus Brunner <super.firetwister@googlemail.com> |
| Date: Mon Apr 28 08:47:47 2008 +0200 |
| |
| ppc4xx: Fixup ebc clock in FDT for 405GP/EP |
| |
| On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb |
| and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc |
| doesn't exist. |
| |
| Signed-off-by: Markus Brunner <super.firetwister@gmail.com> |
| |
| commit 2ef7503a593c77a80c2a054011970227c4b62774 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Apr 24 07:57:17 2008 +0200 |
| |
| NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 |
| |
| Move non-inlied functions into specific drivers file |
| Set get_prom as weak |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Apr 3 17:04:19 2008 +0200 |
| |
| net: make ARP timeout configurable |
| |
| Currently the timeout waiting for an ARP reply is hard set to 5 seconds. |
| On i.MX31ADS due to a hardware "strangeness" up to four first IP packets |
| to the boards get lost, which typically are ARP replies. By configuring |
| the timeout to a lower value we significantly improve the first network |
| transfer time on this board. The timeout is specified in milliseconds, |
| later internally it is converted to deciseconds, because it has to be |
| converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on |
| different boards. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Apr 3 13:36:18 2008 +0200 |
| |
| minor cs8900 driver clean up |
| |
| Remove a redundant register definition, clean up some coding style |
| violations. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Apr 28 22:01:04 2008 +0200 |
| |
| jffs2_1pass.c: fix incompatible pointer type warning |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9 |
| Author: Sascha Laue <Sascha.Laue@gmx.biz> |
| Date: Tue Apr 1 10:10:18 2008 +0200 |
| |
| lwmon5: update dsPIC POST spezification |
| |
| The specification for the lwmon5 board dsPIC POST got changed. |
| Also add defines for the temperatures and voltages. |
| |
| Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> |
| |
| commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7 |
| Author: Sascha Laue <Sascha.Laue@gmx.biz> |
| Date: Tue Apr 1 15:13:03 2008 +0200 |
| |
| Fix watchdog POST for lwmon5 |
| |
| If the hardware watchdog detects a voltage error, the watchdog sets |
| GPIO62 to low. The watchdog POST has to detect this low level. |
| |
| Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit dd5748bcd669f46aeb6686c1b341323843738ccc |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Mon Apr 28 14:37:14 2008 +0200 |
| |
| rtl8169: fix compiler warnings |
| |
| Fix multiple compiler warnings related to argument type mismatch. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1 |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Mon Apr 28 14:36:06 2008 +0200 |
| |
| IDE: fix compiler warnings |
| |
| The IDE driver can use 32-bit addresses in LBA mode, in which case it |
| spits multiple warnings during compilation. Fix them. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit db9084de28c46ac81c8f681722cb0d7411be4d7f |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Mon Apr 28 14:35:57 2008 +0200 |
| |
| LinkStation: fix compiler warning, add a maintainer |
| |
| out_8 wants a pointer to an unsigned as the first argument. Add a |
| maintainer for Linkstation boards. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit c71abba3cb67b063f789f17abf6c7447727c0cd5 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Apr 28 14:55:12 2008 +0200 |
| |
| cmd_nand.c: fix "differ in signedness" problem |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f2c288a35341ad02ac03b1563d786763c9c8f159 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Apr 28 12:48:47 2008 +0200 |
| |
| pcnet.c: fix a merge issue |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4ca79f477ebd25a6872e6196d80e2f5eff441376 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Apr 28 12:08:18 2008 +0200 |
| |
| NAND: fix some strict-aliasing compiler warnings |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 28 11:37:14 2008 +0200 |
| |
| ppc4xx: Fix compile warning of hcu4 board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Apr 28 11:31:23 2008 +0200 |
| |
| MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom' |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Mon Apr 28 00:25:32 2008 +0200 |
| |
| mx31ads: fix loadaddr environment variable define |
| |
| Arithmetic expressions do not get evaluated under stringification. Remove |
| default network configuration, add DHCP command support. Thanks to Felix |
| Radensky for reporting. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 144eec777ac07bcb12bd38245a5a289f694a7f98 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Apr 28 10:55:24 2008 +0200 |
| |
| katmai: fix section overlap problem |
| |
| Since we didn't want to remove features from the configuration, we |
| decided to increase the U-Boot image size (add one flash sector). |
| |
| Also changed the default environment definition to make it |
| independent of such changes. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 941d696d25624e3cc65ebf924199541acf52d74e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Apr 28 10:55:24 2008 +0200 |
| |
| katmai: fix section overlap problem |
| |
| Since we didn't want to remove features from the configuration, we |
| decided to increase the U-Boot image size (add one flash sector). |
| |
| Also changed the default environment definition to make it |
| independent of such changes. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Sat Apr 26 11:44:44 2008 -0500 |
| |
| post: Fix building with O= |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Apr 26 01:55:00 2008 +0200 |
| |
| Prepare v1.3.3-rc1 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 19cf2ec90d8ce52da60c1693693c4048cb810967 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Apr 26 01:25:39 2008 +0200 |
| |
| post/Makefile: make sure to use the correct flags |
| |
| ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a" |
| messages to be printed. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Apr 26 00:34:42 2008 +0200 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f9204e15173834ff8d123e36279ce49c3c6c74fc |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Sun Apr 20 10:38:12 2008 +0200 |
| |
| i.MX31: Enable SPI and MC13783/RTC support for the Litekit board |
| |
| This patch enables SPI and MC13783/RTC support for the Litekit board. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit f97abbfb47d9e407354e157cae3f6369e460cd37 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Apr 25 01:08:32 2008 -0500 |
| |
| MPC8544DS: decode pcie3 end-point configuration correctly. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 292188e15523c165c4269403fdcd33c26d89176e |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Fri Apr 25 00:55:09 2008 -0500 |
| |
| MPC8544DS: Removes the unknown flash message information |
| |
| This patch removes the unknown flash message information: |
| '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB' |
| This unknown flash message is caused by PromJet. |
| Some of the board user is unhappy with this information. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b2115757403beef0ac6bc2c6c3b24f31256a75d2 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Apr 24 14:07:38 2008 -0500 |
| |
| mpc83xx: bump loadaddr over fdtaddr to 0x500000 |
| |
| this seems as a good compromise between human memory, typing, |
| and last but not least, to accommodate for current and future kernel bloat. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Acked-by: Dave Liu <daveliu@freescale.com> |
| |
| commit be5a7190265a34d968578ff266549c60f6f57654 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Apr 15 13:12:23 2008 +0800 |
| |
| mpc83xx: clean up the readme for 83xx boards |
| |
| 1. correct the typo |
| 2. correct the memory map for 837xerdb board |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Apr 15 13:11:11 2008 +0800 |
| |
| mpc83xx: remove the unused CPM's stuff |
| |
| The MPC83xx family never have CPM block, so remove it from 83xx. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit c63ad6325a8ac0097a54b418a3288926b0484b18 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Apr 18 16:29:40 2008 +0200 |
| |
| cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST |
| |
| This patch adds a configurable flash auto protection list that can be used |
| to make U-Boot protect flash regions in flash_init(). |
| |
| The idea has been discussed on the u-boot mailing list starting |
| on Nov 18th, 2007. |
| |
| Even this patch brings a new feature it is used as a bugfix for 4xx |
| platforms where flash_init() does not completely protect the |
| monitor's flash range in all situations. |
| |
| U-Boot protects the flash range from CFG_MONITOR_BASE to |
| (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not |
| include the reset vector at 0xfffffffc. |
| |
| Example: |
| #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}} |
| |
| This config option will auto protect the last 512k of flash that |
| contains the bootloader on board like APC405 and PMC405. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Apr 25 13:59:03 2008 +0200 |
| |
| ppc4xx: Remove double defines in lwmon5.h |
| |
| introduced with latest lwmon5/POST merge |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7590378fb9c686709492ceb142825cd058255956 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Apr 25 13:54:02 2008 +0200 |
| |
| Use watchdog-aware functions when calculating hashes of images - take two |
| |
| Some files didn't get updated properly with the "Use watchdog-aware |
| functions when calculating hashes of images" commit, this commit |
| fixes this. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8e048c438e20ec89b49da5f085f8f756eba6e587 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Apr 25 12:01:39 2008 +0200 |
| |
| ppc4xx: Add bootcount limit handling for APC405 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Apr 25 12:10:09 2008 +0200 |
| |
| Use watchdog-aware functions when calculating hashes of images |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 25 12:44:08 2008 +0200 |
| |
| USB: fix more GCC 4.2.x aliasing warnings |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit aff4f86448f6586930f0a3be7fc4b0ddcf450980 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 25 12:41:53 2008 +0200 |
| |
| lib_generic/crc32.c: add missing #include <watchdog.h> |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 25 11:52:21 2008 +0200 |
| |
| lib_generic/crc32.c: fix compile problem |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 22 12:20:32 2008 +0200 |
| |
| ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt |
| |
| The PCIe root-complex/endpoint setup as configured via the "pcie_mode" |
| environment variable will now get passed to the Linux kernel by setting |
| the device_type property of the PCIe device tree node. For normal root- |
| complex configuration it will keep its defaults value of "pci" and for |
| endpoint configuration it will get changed to "pci-endpoint". |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Apr 24 10:30:53 2008 +0200 |
| |
| lwmon5: watchdog POST fix |
| |
| Use the GPT0_MASKx registers as the temporary storage for watch-dog |
| timer POST test instead of GPT0_COMPx. The latter |
| (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Apr 21 18:10:14 2008 -0500 |
| |
| lib_ppc: Revert "Make MPC83xx one step closer to full relocation." |
| |
| This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has |
| proven problematic getting right from the start at least on 83xx and |
| 4xx. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a99715b8ebfc500f3f40e01b36b64d473938443d |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Apr 18 14:50:01 2008 +0200 |
| |
| Realining some header definitions. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 4acbc6c7f993cae409c424615415a3e76820f13d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Apr 24 07:57:16 2008 +0200 |
| |
| NE2000: coding style cleanup |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit b4aff1ffaf7120032c653357c007faa14f74d29d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 23 00:11:47 2008 +0900 |
| |
| qemu-mips.h: Add CFI support |
| |
| CONFIG_ENV_OVERWRITE is also added. |
| |
| This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 4a1f11b45a82908e5b0df602d703082413a6b7ed |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Apr 22 22:47:27 2008 +0900 |
| |
| doc/README.mips: Add MIPS notes |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 215b01bba8bc662d35f72b084700b192d367dfb4 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Apr 22 12:27:56 2008 +0200 |
| |
| Add support for calculating hashes with watchdog triggering |
| |
| Implement watchodg-aware variants of hash calculation functions: |
| - crc32_wd() |
| - md5_wd() |
| - sha1_csum_wd() |
| The above functions calculate the hash of the input buffer in chunks, |
| triggering the watchdog after processing each chunk. The chunk size |
| is given as a function call parameter. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 8875e3abab986df930167ce5c1ac4f95dcacc81c |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Wed Apr 23 11:02:12 2008 +0900 |
| |
| qemu-mips: Cleanup whitespace, indentation, etc. |
| |
| No functional change. |
| |
| This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD. |
| Then I re-created from scratch, and changed more lines than the original. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 386563197e3a50b0e97ad9aae87f57d9aab909ab |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Wed Oct 10 23:02:09 2007 +0300 |
| |
| Fixed pcnet io_base |
| |
| Bus and phys address are not always the same |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit 11ea26fd1cb63c91403fe04a6eea975cd418603f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Apr 24 23:44:26 2008 +0200 |
| |
| drivers/net/pcnet.c: Coding Style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 899ef7b84578b7cafadfd78488c2fd2aac93f636 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Wed Oct 10 23:04:23 2007 +0300 |
| |
| Added Am79C970A chip id to pcnet |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Sun Apr 20 10:35:03 2008 +0200 |
| |
| i.MX31: Fix architecture numbers for ADS and Litekit boards |
| |
| Correct the Linux architecture number for i.MX31 Litekit and ADS boards. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit e7ae84d6c7288790e88639f57cb60daf89c11369 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Sun Apr 20 10:36:36 2008 +0200 |
| |
| i.MX31: Use symbolic names for Litekit membases. |
| |
| Use symbolic names instead of hard coded addresses for Litekit membases. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit 2ef1d9b6030d02f576b1bcd9fec948e602522012 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Apr 19 17:59:20 2008 +0200 |
| |
| Fix show_boot_progress prototype |
| |
| in commit fad634071 "make show_boot_progress () weak." |
| show_boot_progress is supposed to be declared as weak but declared as |
| inline instead. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit edbed247a14d70b94958010f736621212285de91 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Apr 18 12:39:23 2008 +0200 |
| |
| Memory footprint optimizations |
| |
| As suggested by Wolfgang Denk: |
| - image printing functions: |
| - remove wrappers |
| - remove indentation prefix from functions' signatures |
| - merge getenv_verify and getenv_autostart into one parametrized function |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Apr 15 13:33:11 2008 +0200 |
| |
| MX31ADS environment variable update, spi and rtc support |
| |
| Update MX31ADS default environment to better match the flash layout and |
| the memory map, support SPI and RTC. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 022f12163595b9a55380c6d77c3119b93d6a9a4b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Apr 21 09:28:36 2008 -0500 |
| |
| 85xx: Round up frequency calculations to get reasonable output |
| |
| eg. because of rounding error we can get 799Mhz instead of 800Mhz. |
| |
| Introduced DIV_ROUND_UP and roundup taken from linux kernel. |
| |
| Signed-off-by: Dejan Minic <minic@freescale.com> |
| Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Apr 23 16:58:04 2008 -0500 |
| |
| fsl_pci: Only modify registers if we have them |
| |
| pme_msg_det exists only on PCIe controllers only set it if we are a "bridge". |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 83fe32334337def160b302aa9d152d808bfcc68e |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Wed Apr 23 10:57:33 2008 +0200 |
| |
| USB: remove a cpu bug workaround for an unsupported architecture. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit f957576cb53e6cfab412709cfc8db1afd39d21c3 |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Wed Apr 23 10:53:23 2008 +0200 |
| |
| USB: fix those pesky aliasing warnings issued by gcc-4.2 |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 89cdab788f3716b335fefb60b836ebcf975aceab |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Mar 31 11:02:01 2008 -0400 |
| |
| crc32: use uint32_t rather than unsigned long |
| |
| The envcrc.c does sizeof(unsigned long) when calculating the crc, but |
| this is done with the build toolchain instead of the target tool |
| chain, so if the build is a 64bit system but the target is 32bits, |
| the size will obviously be wrong. This converts all unsigned long |
| stuff related to crc32 to uint32_t types. Compile tested only: output |
| of ./tools/envcrc when run on a 32bit build system matches that of a |
| 64bit build system. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 80c40b765b3642ddb9f3392b7898715aab44a29c |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Wed Mar 26 09:53:29 2008 +0100 |
| |
| ARM: Davinci: Fix DM644x timer overflow handling and cleanup |
| |
| Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code. |
| |
| Changes: |
| |
| - Remove *_masked() functions as noted by Wolfgang |
| |
| - Adapt register naming to recent TI spec (sprue26, March 2007) |
| |
| - Fix reset_timer() handling |
| |
| - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this. |
| |
| [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 |
| |
| - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV). |
| |
| Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing! |
| |
| Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> |
| |
| commit a6e6fc610e39dec41b79680413d4ed38145bd3c8 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Wed Apr 9 16:09:41 2008 +0200 |
| |
| Added watchdog triggering calls in the "mtest" test function. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit d32a874b9b4c1e949ee38be7790f6bf6d6143451 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Sun Apr 6 19:19:14 2008 +0200 |
| |
| lwmon5 watchdog: limit trigger rate |
| |
| Limit the rate of h/w watch-dog triggering on the LWMON5 board by |
| the CONFIG_WD_MAX_RATE value. |
| |
| Note that an earlier version of this patch which used microseconds |
| instead of ticks dis not work. The problem was that we used |
| usec2ticks() to convert microseconds into ticks. usec2ticks() uses |
| get_tbclk(), which in turn calls get_sys_info(). It turns out that |
| this function does a lot of prolonged operations (like divisions) |
| which take too much time so we do not trigger the watchdog in time, |
| and it resets the system. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 2d2b994a30bb100774dc747ae9865b7f95285a88 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Mar 31 10:51:37 2008 +0200 |
| |
| POST: move CONFIG_POST to Makefiles |
| |
| Introduce the new logical option CONFIG_HAS_POST which is set when the |
| platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles |
| to determine should the POST libs be compiled for the selected target |
| platform, or not. |
| |
| To avoid breaking u-boot linking process, the empty post/libpost.a file is |
| created for platforms which do not have POSTs. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Mar 31 10:49:34 2008 +0200 |
| |
| POST: preparations for moving CONFIG_POST to Makefiles |
| |
| Remove CONFIG_POST ifdefs from the post/ source files. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 22 14:14:20 2008 +0200 |
| |
| ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage |
| |
| This patch fixes the Canyonlands and Glacier default environment to better |
| fit to the arch/powerpc device-tree kernels. The variables dealing with |
| arch/ppc booting are removed, since these boards are supported only in |
| arch/powerpc. Glacier uses the same config file as Canyonlands. |
| |
| Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 22 14:06:42 2008 +0200 |
| |
| ppc4xx: Small coding style cleanup for the latest esd patches |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 79941d63bc03aed8c48d7602f18217cc200ee931 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 18:01:07 2008 +0200 |
| |
| ppc4xx: Update CPU strapping for PMC440 boards |
| |
| This patch removes the temporary 'test' strapping option |
| of the sbe command. The '667' strapping option now uses |
| a PLB/PCI divider of 3. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit f00cf3193a6635355b121e90debb2f54e777e7da |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:42:21 2008 +0200 |
| |
| ppc4xx: Remove unused APC405 strataflash driver |
| |
| The APC405 board support has been migrated to use the common |
| CFI flash driver. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1c686676a86473bbd92151f0544e109413f6ed06 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:42:17 2008 +0200 |
| |
| ppc4xx: Update APC405 configuration |
| |
| - enable esd's auto_update mechanism |
| - support alternative flash layout on rev. 1.8 boards |
| - update default environment |
| - use common CFI flash driver |
| - coding style cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 0b9872515a521bf7866dc24b85ddce708e60d702 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:42:11 2008 +0200 |
| |
| ppc4xx: Update APC405 board support |
| |
| - enable esd's auto_update mechanism |
| - fix LCD support on latest hardware revision (uses other LCD controller) |
| - support alternative flash layout on rev. 1.8 boards |
| - coding style cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 83975d02e225e231960784972e7820a8b303756b |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:42:06 2008 +0200 |
| |
| ppc4xx: update esd's common auto_update code for 405 boards |
| |
| - Coding style cleanup (long lines) |
| - improve handling of protected flash regions |
| - remove dead code |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit b9233fe5d59cb25d975071616bd1035d6f4c2285 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:41:59 2008 +0200 |
| |
| ppc4xx: Update esd's common LCD code for 405 boards |
| |
| - Coding style cleanup (long lines) |
| - Add s1d13505 support |
| - Make some functions return a result code instead of void |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit dea68189424c3f1242427a8146a3861bf093173c |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 11:36:55 2008 +0200 |
| |
| ppc4xx: Update FPGA image for APC405 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 2a05b152924acfcec3b037693329e517e6d3578f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 11:36:08 2008 +0200 |
| |
| ppc4xx: Update bootlogo for APC405 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Apr 18 16:41:31 2008 +0200 |
| |
| ppc4xx: Add dcache_enable() for 440 |
| |
| dcache_enable() was missing for 440 and the patch |
| 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf |
| "] behavior uses this function. |
| |
| Note: Currently the cache handling functions like |
| d/icache_disable/enable() are NOP's on 440. This may be changed in the |
| future. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a49e0d177a0749614b316ec847fb623f09c82c07 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 11:19:04 2008 +0200 |
| |
| video: Add missing free for logo memory |
| |
| This patch adds two missing free()s. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42 |
| Author: Troy Kisky <troy.kisky@boundarydevices.com> |
| Date: Mon Sep 24 16:41:43 2007 -0700 |
| |
| PATCH - Fix oob data copied into supplied buffer |
| |
| This patch correctly sets the oobavail variable |
| and fixes a bug where the oob data was not valid when |
| there where multiple groups in oobfree. |
| |
| First segment fixes a typo |
| Second segment fixes a bug where oob data may be copied incorrectly. |
| Third segment adds an error message when exiting due to write protect. |
| Forth segment fixes a bug where oobavail may be set incorrectly. |
| |
| Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
| |
| commit e1d09680f64b452adde89ed9fe28a77c56bedc9a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Apr 18 17:24:32 2008 +0200 |
| |
| ppc4xx: Fix sys_get_info() for 405GP(r) |
| |
| This patch assigns the correct EBC clock for 405GP(r) CPUs |
| to PPC4xx_SYS_INFO structure. Without this patch U-Boot |
| uses an uninitialized EBC clock in its startup message. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 20 15:39:38 2008 -0700 |
| |
| Makefile: remove nand_spl/System.map when cleaning up. |
| |
| commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 20 15:35:52 2008 -0700 |
| |
| MAKEALL: sort entries / lists. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0878af169b181868a105b5c33f3a6423e2c9fd60 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Apr 18 11:29:01 2008 -0500 |
| |
| 85xx: Fix size of cpu-release-addr property |
| |
| The cpu-release-addr is defined as always being a 64-bit quanity regardless |
| if we are running on a 32-bit or 64-bit machine. |
| |
| commit 88353a985109562a639b2f8a0c90d77011bfe374 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Apr 4 11:15:58 2008 -0500 |
| |
| Fix calculation of I2C clock for some 85xx chips |
| |
| Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and |
| some use CCB/3. There is no pattern that can be used to determine which |
| chips use which frequency, so the only way to determine is to look up the |
| actual SOC designation and use the right value for that SOC. |
| |
| Update immap_85xx.h to include the GUTS PORDEVSR2 register. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 18 11:44:27 2008 -0700 |
| |
| Fix build breakage casued by commit c0559be371b2 |
| |
| Change env_get_char from a global function ptr to a function. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 268a804d7e2fa07b64211fd2f9a9615db4539f23 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 18 10:53:41 2008 -0700 |
| |
| Coding Style cleanup, update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Apr 8 14:00:57 2008 -0400 |
| |
| Add support for u-boot in svn and localversion-* files |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d23ff6827decf121461fbc5622612fd7effe207e |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Apr 3 17:04:22 2008 +0200 |
| |
| MX31ADS network and flash updates |
| |
| This patch allows U-Boot to use buffered writes to the Spansion NOR |
| flash installed on this board, and eliminates long delays in network |
| transfers after the board startup. |
| |
| Also modify flash layout to embed main and redundant environment |
| blocks in the U-Boot image. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit b5dc9b304d289831f291843ff88a45cbdf1a6290 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Mon Apr 14 10:53:12 2008 +0200 |
| |
| Support for the MX31ADS evaluation board from Freescale |
| |
| This patch adds support for the MX31ADS evaluation board from Freescale, |
| initialization code is copied from RedBoot sources, also provided by |
| Freescale. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 499e7831e1baaac6bfb959213f1950c216fbc5ba |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 8 10:33:29 2008 +0200 |
| |
| ppc4xx: Change Canyonlands to support booting from 2k page NAND devices |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5e182dce04d68cc94407a1b1fa09307f2bb96719 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 8 10:33:28 2008 +0200 |
| |
| ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 8 10:33:27 2008 +0200 |
| |
| ppc4xx: Add Glacier NAND booting target |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 46f373838e384a4c23d13581b1dfa5acb66b5810 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 8 10:31:00 2008 +0200 |
| |
| nand_spl: Update nand_spl to support 2k page size NAND devices |
| |
| This patch adds support for booting from 2k page sized NAND device |
| (e.g. Micron 29F2G08AAC). |
| |
| Tested on AMCC Canyonlands. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Apr 17 18:18:00 2008 +0200 |
| |
| Fix crash on sequoia in ppc_4xx_eth_init |
| |
| Currently U-Boot crashes in ppc_4xx_eth_init on sequoia |
| with cache enabled (TLB Parity exeption). This patch |
| fixes the problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Apr 17 18:15:27 2008 +0200 |
| |
| ppc4xx: Fix crash on sequoia with cache enabled |
| |
| Currently U-Boot crashes on sequoia board in CPU POST if |
| cache is enabled (CONFIG_4xx_DCACHE defined). The cache |
| won't be disabled by change_tlb before CPU POST because |
| there is an insufficient adress range check since |
| CFG_MEM_TOP_HIDE was introduced. This patch tries to fix |
| this problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 43c509254fab375c49936498da944658117ed07c |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Thu Apr 17 23:35:13 2008 +0900 |
| |
| Use jr as register jump instruction |
| |
| Current assembler codes are inconsistent in the way of register jump |
| instruction usage; some use jr, some use j. Of course GNU as allows both |
| usages, but as can be expected from `Jump Register' the mnemonic `jr' is |
| more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage |
| at all. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 7ce63709828d37b08866e537339a169bd0db2bd3 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Apr 15 14:15:30 2008 +0200 |
| |
| RTC driver for MC13783 |
| |
| MC13783 is a multifunction IS with an SPI interface to the host. This |
| driver handles the RTC controller in this chip. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 38254f45b0b412332726c90d3184ad47479fcffb |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Apr 15 14:14:25 2008 +0200 |
| |
| New i.MX31 SPI driver |
| |
| This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far |
| only implemented and tested on i.MX31, can with a modified register layout |
| and definitions be used for i.MX27, I think, MXC CPUs have similar SPI |
| controllers too. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Tue Apr 15 19:09:10 2008 +0200 |
| |
| Fix name of i.MX31 boards in config file header |
| |
| Correct the name of the i.MX31 Litekit and phyCORE boards in config files. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit a49864593e083a5d0779fb9ca98e5a0f2053183d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Apr 13 19:42:19 2008 -0400 |
| |
| allow ports to override go behavior |
| |
| Split the arch-specific logic out of the common go code and into a dedicated |
| weak function called do_go_exec() that lives in cpu directories. This will |
| need review from i386/nios people to make sure I didn't break them. |
| |
| commit 017e9b7925f74878d0e9475388cca9bda5ef9482 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Apr 13 19:42:18 2008 -0400 |
| |
| allow ports to override bootelf behavior |
| |
| Change the bootelf setup function into a dedicated weak function called |
| do_bootelf_exec. This way ports can control the behavior however they |
| like before/after calling the ELF entry point. |
| |
| commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7 |
| Author: Ulf Samuelsson <ulf@atmel.com> |
| Date: Sat Apr 12 20:56:03 2008 +0200 |
| |
| Reorder ARM boards in Makefile |
| |
| Rearrange ARM boards in Makefile so that ARM926EJ-S boards |
| are no longer under ARM92xT header. |
| |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688 |
| Author: Ulf Samuelsson <ulf@atmel.com> |
| Date: Sat Apr 12 20:29:44 2008 +0200 |
| |
| Clean up dataflash partitioning |
| |
| This patch removes the board dependent parts from |
| "drivers/mtd/dataflash.c". |
| Each board relying on this, will have the appropriate |
| code in a new file, "partition.c" in the board directory. |
| board Makefiles updated to use the file. |
| |
| The dataflash partitions are aligned on sector/page boundaries. |
| |
| The CONFIG_NEW_DF_PARTITION was used to create named partitions |
| This is now the default operation, and the CONFIG variable is removed. |
| |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| |
| commit 51ecde946fec511a16346e498204ca10ad71080d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Apr 12 14:08:45 2008 +0200 |
| |
| gitignore: udpate stgit generated and .patch file |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 66e39818e95f51ee1c1dd2094407a8929543fa6d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 18 00:15:36 2008 -0700 |
| |
| Get rid of redundant copy of renamed header file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Fri Apr 11 21:20:14 2008 +0300 |
| |
| Fix dependency generation for older gcc versions |
| |
| With gcc 3.3.3 at least, compilation fails with |
| |
| Generating include/autoconf.mk |
| gcc: compilation of header file requested |
| make: *** [include/autoconf.mk] Error 1 |
| |
| since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba. |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit cb1c4896905ab22fcd982e6a8a539f0031942e71 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Apr 11 11:07:49 2008 +0200 |
| |
| Restore the ability to continue booting after legacy image overwrite |
| |
| Before new uImage code was merged, bootm code allowed for the kernel image to |
| get overwritten during decompresion. new uImage introduced a check for image |
| overwrites and refused to boot the image that got overwritten. This patch |
| restores the old behavior. It also adds a warning when the image overwriten is |
| a multi-image file, because in such case accessing componentes other than the |
| first one will fail. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Apr 11 11:07:43 2008 +0200 |
| |
| ppc: Fix ftd_blob variable init when processing raw blob |
| |
| Set fdt_blob variable before its value is printed out. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 3d36be030043cd841a2551d00a395135e363a64b |
| Author: Jason Wessel <jason.wessel@windriver.com> |
| Date: Thu Apr 10 14:30:16 2008 -0500 |
| |
| Remove all the search paths from the .lds files. |
| |
| The cross compiler is responsible for providing the correct libraries |
| and the logic to find the linking libraries. |
| |
| Signed-off-by: Jason Wessel <jason.wessel@windriver.com> |
| |
| commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Mon Apr 14 15:44:16 2008 +0200 |
| |
| Boot-related documentation update |
| |
| - document 'bootm_low' and 'bootm_size' environment variables |
| - update inaccurate CFG_BOOTMAPSZ entry |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Wed Apr 9 17:34:08 2008 +0200 |
| |
| Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code" |
| |
| Restore logic reverted by commit |
| |
| commit 80767a6cead9990d9e77e62be947843c2c72f469 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed Sep 5 16:04:41 2007 +0100 |
| |
| Changed API name to coloured_led.h |
| Removed code using deprecated ifdef CONFIG_BOOTBINFUNC |
| Tidied other cpu/arm920t/start.S code |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Apr 8 10:24:24 2008 -0400 |
| |
| Remove conflicting NAND ID |
| |
| There are two NAND entries with ID 0xDC and this obviously causes problems. |
| In the kernel, they punted the first entry, so we should do the same. |
| |
| See this upstream e-mail for more info: |
| http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html |
| |
| Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 188e94c370621708d13547d58dbc6ed3c5602aa8 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Tue Apr 8 16:20:35 2008 +0900 |
| |
| cpu/mips/cpu.c: Fix flush_cache bug |
| |
| Cache operations have to take line address (addr), not start_addr. |
| I noticed this bug when debugging ping failure. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Apr 3 14:29:01 2008 +0200 |
| |
| TQM5200: fix default IDE reset level |
| |
| Before the first call of ide_reset(), the level of the IDE reset |
| signal on the TQM5200 is low (reset asserted). This patch sets the |
| default value to high (reset not asserted). |
| |
| Currently this patch fixes no real problem, but it is cleaner to |
| assert the reset signal only on demand, and not permanently. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit c61e033d6e8abb7b4060ee36060961e1399f6079 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Thu Apr 3 14:18:48 2008 +0200 |
| |
| mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit f308572e19eb7fe63aa3d41f214cde4c23c9800f |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Thu Apr 3 14:18:47 2008 +0200 |
| |
| mgcoge, mgsuv: rename 'addcon' to 'addcons' |
| |
| The latter name with 13 users is already established, so we will use |
| that. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit e175eacc87c3a9e4dad0799fee0e95732520afc7 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Apr 3 13:37:56 2008 +0200 |
| |
| IDE: fix bug in reset sequence |
| |
| According to the ata (ata5) specification the RESET- signal |
| shall be asserted for at least 25 us. Without this patch, |
| the RESET- signal is asserted on some boards for only < 1 us |
| (e. g. on the TQM5200). This patch adds a general delay of |
| 25 us to the RESET- signal. |
| |
| Without this patch a Platinum 4 GiB CF card is not recognised |
| properly on boards with a TQM5200 (STK52xx, TB5200). |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 813bea96a960916c72b4a3a7df840151529c26ce |
| Author: Sascha Laue <Sascha.Laue@gmx.biz> |
| Date: Thu Apr 3 14:43:11 2008 +0200 |
| |
| lwmon5: disable CONFIG_ZERO_BOOTDELAY |
| |
| Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> |
| |
| commit 53eec6f1d25932e76d63ccb14082792b0b96bf41 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 2 08:03:58 2008 +0200 |
| |
| ds174x: Fix warning on return in rtc_get and rtc_set functions |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a253b38bf50c85227c33ca0febc870ee49d1588e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 2 08:03:57 2008 +0200 |
| |
| cmd_log.c: Fix assignment differ in signedness |
| |
| In function 'logbuff_init_ptrs': |
| cmd_log.c:79: warning: pointer targets in assignment differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Wed Apr 2 11:04:43 2008 +0530 |
| |
| Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c |
| |
| Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in> |
| |
| commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Apr 1 14:07:10 2008 +0200 |
| |
| s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c08fb3ea36d19b1640b7906264581e9105534399 |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Tue Apr 15 10:24:14 2008 +0200 |
| |
| Additional PCI IDs for IDE and network controllers |
| |
| These PCI IDs are required by the Linkstation platforms. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit c0559be371b2a64b1a817088c3308688e2182f93 |
| Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> |
| Date: Mon Apr 14 23:01:50 2008 +0200 |
| |
| Change env_get_char from a global function ptr to a function. |
| |
| This avoids an early global data reference. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit 3e0f331c05d72f140715c1e9fca991927e44d422 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Apr 29 12:35:08 2008 +0000 |
| |
| Clean up smsc911x driver |
| |
| Replace direct register address derefencing with accessor functions. |
| Restrict explicitly 32-bit bus-width, extend affected configurations |
| respectively. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Tue Apr 15 00:08:20 2008 -0400 |
| |
| This patch adds a driver for the following smsc network controllers: |
| LAN9115 |
| LAN9116 |
| LAN9117 |
| LAN9215 |
| LAN9216 |
| LAN9217 |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski<lg@denx.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3dfd4aab929cccddb63d9ea509967861e1333b52 |
| Author: Sascha Laue <Sascha.Laue@gmx.biz> |
| Date: Tue Apr 1 15:13:03 2008 +0200 |
| |
| Fix watchdog POST for lwmon5 |
| |
| If the hardware watchdog detects a voltage error, the watchdog sets |
| GPIO62 to low. The watchdog POST has to detect this low level. |
| |
| Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i> |
| |
| commit 24b448448a917e52806f82660a5c9d47608894fb |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Apr 1 15:22:11 2008 +0800 |
| |
| ata: update the libata.h from ata.h of linux kernel |
| |
| Current libata.h of u-boot is out of sync from linux kernel, |
| this patch make it be consistent with linux kernel. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Tor Krill <tor@excito.com> |
| |
| commit f8f9dc98883f66f59eb0601da65808e6b139c87c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Mar 31 11:59:27 2008 -0500 |
| |
| Allow use of ARCH=powerpc when building |
| |
| The linux kernel is now mostly ARCH=powerpc, so to make life easier |
| allow use to use ARCH=powerpc and convert it to ARCH=ppc. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Mar 31 10:40:54 2008 +0900 |
| |
| Add apollon board MAINTAINERS entry |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 77e475cc0ed1832160017d364be32a0be9ff02a9 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Mar 31 10:40:36 2008 +0900 |
| |
| Fix OneNAND read |
| |
| It should access with 16-bit instead of 8-bit |
| |
| Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit a9da2b41079d230db3a5641625311983f85ce1fb |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Mar 31 10:40:19 2008 +0900 |
| |
| Fix OneNAND erase command |
| |
| It mis-calculates the block address. |
| Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 61525f2ffa156665a66908fda47dbf29d65ea579 |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Mon Mar 31 01:32:15 2008 +0200 |
| |
| Support for LinkStation / KuroBox HD and HG PPC models |
| |
| This patch is based on the port by Mihai Georgian (see linkstation.c for |
| Copyright information) and implements support for LinkStation / KuroBox HD |
| and HG PPC models from Buffalo Technology, whereby HD is deactivated at |
| the moment, pending network driver fixing. |
| |
| Notice to users: this is pretty much a barebone port. Support for network |
| on HG models is already in the U-Boot mainline, but you might also want |
| patches to switch fan / phy modes depending on the negotiated ethernet |
| parameters. This patch also doesn't support console switching, booting EM |
| mode, Buffalo specific ext2 magic number. So, if you want to use any of |
| those, you need additional patches. Otherwise this patche provides a fully |
| functional u-boot with a network console on your system. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Mar 30 01:22:13 2008 -0500 |
| |
| Add CONFIG_MII_INIT support to related boards |
| |
| Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in |
| cmd_init.c. Add CONFIG_MII_INIT to board configuration files |
| that use mii_init() in cmd_init.c. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Mar 30 01:19:06 2008 -0500 |
| |
| Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards |
| |
| Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define |
| CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit e99ccb488181d012248c6be30b2093e950319fc5 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Mar 27 11:46:38 2008 -0500 |
| |
| Introduce phys_size_t and move phys_addr_t into asm/types.h |
| |
| Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's |
| that have larger physical addresses like 44x, 85xx, and 86xx. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 20a14a42a25f72e379f38460b8a8484667536795 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Apr 2 16:19:07 2008 -0500 |
| |
| Rename include/md5.h to include/u-boot/md5.h |
| |
| Some systems have md5.h installed in /usr/include/. This isn't the |
| desired file (we want the one in include/md5.h). This will avoid the |
| conflict. This fixes the host tools building problem by creating a new |
| directory for U-Boot specific header files. |
| |
| [Patch by Andy Fleming, modified to use separate directory by Wolfgang |
| Denk] |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Acked-by: Timur Tabi <timur@freescale.com> |
| |
| commit f297b7a1ec87433f66320d89d993e1bc738c66b8 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Mar 27 18:51:17 2008 +0800 |
| |
| drivers: code clean up |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Mar 27 18:50:41 2008 +0800 |
| |
| drivers: clean up the ata_piix.h |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit e8f7ba404f1409606962815ecc955a06984b08b3 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Mar 27 18:49:56 2008 +0800 |
| |
| doc: english polishing for README.sata |
| |
| according to gvb's suggestion, polishing for the doc. |
| |
| Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 3e3f766a5274d204780460e1879723b565296d34 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Mar 26 18:53:28 2008 -0500 |
| |
| Fix warnings introduced by I2C bus speed setting patch |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3c735e7437150e8615f26930c7819db85634276d |
| Author: eran liberty <eran.liberty@gmail.com> |
| Date: Thu Mar 27 00:50:49 2008 +0100 |
| |
| Altera Stratix II support |
| |
| Adds Support for Altera's Stratix II. |
| |
| Within your board specific init file you will have to call |
| |
| 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); |
| 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); |
| |
| Altera_desc* contines (for example): |
| { |
| Altera_StratixII, /* part type */ |
| passive_serial, /* interface type */ |
| 1, /* bytes of data part can accept */ |
| (void *)(&funcs), /* interface function table */ |
| 0L, /* base interface address */ |
| 0 /* implementation specific cookie */ |
| } |
| |
| funcs is the interface. It is of type altera_board_specific_func. |
| It looks like this: |
| altera_board_specific_func func = { |
| pre_fn, |
| config_fn, |
| status_fn, |
| done_fn, |
| clk_fn, |
| data_fn, |
| abort_fn, |
| post_fn, |
| }; |
| |
| you will have to implement these functions, which is usually bit |
| banging some gpio. |
| |
| Signed-off-by: Eran Liberty <liberty@extricom.com> |
| |
| commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 13 14:32:54 2008 -0700 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:41:17 2008 +0100 |
| |
| Phytec Phycore-i.MX31 support |
| |
| This patch adds support for the Phytec Phycore-i.MX31 board |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:41:09 2008 +0100 |
| |
| mx31 litekit support |
| |
| This patch adds support for the mx31 litekit board |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit cdace0661208754a53019ea0dc7b803a040e0939 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:40:49 2008 +0100 |
| |
| add an i2c driver for mx31 |
| |
| This patch adds an i2c driver for Freescale i.MX processors |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:40:42 2008 +0100 |
| |
| core support for Freescale mx31 |
| |
| This patch adds the core support for Freescale mx31 |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 7ec68862a27c8f6f6d566228de8f6724d964a939 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 13 14:19:23 2008 -0700 |
| |
| Fix compile error |
| |
| ...as suggested by Peter Pearse |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5252ed95204bdf55bec5a90ea69860bf2f78c643 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:40:36 2008 +0100 |
| |
| Separate omap24xx specific code from arm1136 |
| |
| Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 |
| to cpu/arm1136/omap24xx. |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Jan 29 18:21:05 2008 -0500 |
| |
| disable caches before booting an app for Blackfin apps |
| |
| It isn't generally save to execute applications outside of U-Boot with caches |
| enabled due to the way the Blackfin processor handles caches (requires |
| software assistance). This patch disables caches before booting an ELF or |
| just booting raw code. The previous discussion on the patch was that we |
| wanted to use weaks instead, but that proved to not be feasible when multiple |
| symbols are involved, which puts us back at the ifdef solution. I've |
| minimized the ugliness by moving the setup step outside of the main function. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 13 10:03:54 2008 -0700 |
| |
| ppc: Get rid of unused machine type definitions |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 13 09:59:26 2008 -0700 |
| |
| Coding Style cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7754f33c6fb7a2c050388d20bf3847038558bdcf |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Thu Feb 21 13:58:11 2008 -0500 |
| |
| LM73 bug fix for negative temperatures and cleanup |
| |
| When the LM73 temperature sensor measures a temperature below 0 C, the |
| current driver does not perform sign extension, so the result returned is |
| 512 C too high. This patch fixes the problem, and does general cleanup |
| of the code. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 96ef831f713289afba19da0c8f905e99da2b23e0 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Apr 3 13:36:02 2008 +0200 |
| |
| cfi_flash: Support buffered writes on non-standard Spansion NOR flash |
| |
| Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit |
| series require different addresses for buffered write commands. Define a |
| configuration option to support buffered writes on those chips. A more |
| elegant solution would be to automatically detect those chips by parsing |
| their CFI records, but that would require introduction of a fixup table |
| into the cfi_flash driver. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44 |
| Author: Lee Nipper <lee.nipper@freescale.com> |
| Date: Thu Apr 10 09:35:06 2008 -0500 |
| |
| mpc83xx: Update DIMM data bus width test to support 40-bit width |
| |
| 32-bit wide ECC memory modules report 40-bit width. |
| Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'. |
| |
| Signed-off-by: Lee Nipper <lee.nipper@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5fb5a689d822ca61e814bd523fc930af335242fa |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Mon Mar 31 17:05:12 2008 +0800 |
| |
| mpc83xx: Fix the bug of serdes initialization |
| |
| Currently the serdes will not be initializated due to the |
| partid's error. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2000784818f043db7ca60e2846a72d097766b894 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Apr 3 16:28:29 2008 +0800 |
| |
| mpc83xx: Fix the SATA clock setting of 837x targets |
| |
| Currently the SATA controller clock is configured as CSB clock, |
| usually the CSB clock is 400/333/266MHz. |
| |
| However, The SATA IP block is only guaranteed to operate up to |
| 200 MHz as stated in the HW spec. |
| |
| The bug is reported by Joe D'Abbraccio <ljd015@freescale.com> |
| |
| This patch makes the SATA clock as half of CSB clock. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 2 13:41:21 2008 +0200 |
| |
| mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 97b3ecb575a92fa34c1765229dbc06f2b662f139 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Apr 9 04:20:57 2008 -0500 |
| |
| 85xx: Fix detection of MP cpu spin up |
| |
| We were looking at the wrong memory offset to determine of a secondary |
| cpu had been spun up or not. Also added a warning message if the |
| all the secondary cpus we expect don't spin up. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f3e04bdc3f360c66801a9048956e61e41a16edba |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Apr 8 10:45:50 2008 -0500 |
| |
| 85xx: Use SVR_SOC_VER instead of SVR_VER |
| |
| The recent change introduced by 'Update SVR numbers to expand support' |
| now requires that we use SVR_SOC_VER instead of SVR_VER if we want |
| to compare against a particular processor id. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7 |
| Author: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Date: Fri Apr 11 10:00:35 2008 -0400 |
| |
| ppc4xx: Fix power mgt definitions for PPC440 |
| |
| Corrected DCR addresses of PPC440EP power management registers. |
| |
| Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| |
| commit 950a392464e616b4590bc4501be46e2d7d162dea |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 11 15:11:26 2008 +0200 |
| |
| Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18: |
| |
| Reverting became necessary after it turned out that the patches in |
| the u-boot-arm repo were modified, and in some cases corrupted. |
| |
| This reverts the following commits: |
| |
| 066bebd6353e33af3adefc3404560871699e9961 |
| 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 |
| c88ae20580b2b01487b4cdcc8b2a113f551aee36 |
| a147e56f03871bba4f05058d5e04ce7deb010b04 |
| d6674e0e2a6a1f033945f78838566210d3f28c95 |
| 8c8463cce44d849e37744749b32d38e1dfb12e50 |
| c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d |
| 8bf69d81782619187933a605f1a95ee1d069478d |
| 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d |
| a574a73852a527779234e73e17e7597fd8128882 |
| 1377b5583a48021d983e1fd565f7d40c89e84d63 |
| 1704dc20917b4f71e373e2c888497ee666d40380 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Apr 11 07:02:29 2008 +0200 |
| |
| ppc4xx: Update Kilauea defconfig to use device-tree booting as default |
| |
| This patch reworks the default environment on Kilauea/Haleakala. Now |
| "net_nfs" for exmaple uses the device-tree style booting formerly know |
| as "net_nfs_fdt". Also the addresses in RAM were changed because of the |
| new image booting support, which check for image overwriting. So the |
| addresses needed togeet adjusted. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 9 11:58:02 2008 +0200 |
| |
| ppc4xx: Fix Canyonlands default environment to work with new image support |
| |
| Since the new image support checks for image overwriting, the default |
| environment needs to get adjusted to use correct addresses. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dfc6c7b647dba7ab86749616f0e9e5740deed422 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 9 11:54:11 2008 +0200 |
| |
| ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE |
| |
| The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step |
| closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But |
| on 4xx systems _start currently cannot be used for this calculation. |
| So revert back to the original version for now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f91374f65eae8b42cac329e06ba1c54728278efb |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:49:52 2008 +0100 |
| |
| microblaze: Sort microblaze boards in MAKEALL script |
| |
| commit 62032deb7214c6d9b4396297e2aaa559bc2f8495 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:58:45 2008 +0100 |
| |
| microblaze: clean microblaze_config.mk |
| |
| FLAGS are generated by U-BOOT generator. |
| Board specific FLAGS are in board directory |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit cf5c679ca04a6b54bf53a55b8b9c29335b387287 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:47:19 2008 +0100 |
| |
| microblaze: xupv2p fix config file for supporting FDT |
| |
| commit 188dc16b189143573b1ed90e584bf866d75cdd12 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:53:02 2008 +0100 |
| |
| microblaze: ml401 fix config file for supporting FDT |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 4c6a6f02e239236261333759997eeaf86b30b54c |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:22:48 2008 +0100 |
| |
| microblaze: ml401 - add ifdef for GPIO |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:13:03 2008 +0100 |
| |
| microblaze: clean uart16550 and uartlite handling |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 0b20f250877441460fb79d72192954abe8498834 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:08:31 2008 +0100 |
| |
| microblaze: Add Emaclite driver to Makefile |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 868cde5310f88234b774878e4f06e79df10a88b3 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:08:01 2008 +0100 |
| |
| microblaze: Add Emac driver to Makefile |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 6f961b4f461f6cbb83a467d468a02e6078c2b327 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:42:29 2008 +0100 |
| |
| microblaze: add Emac ethernet driver |
| |
| commit 89c53891b18cbafd29ab8931b40e27ad231b6085 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:41:56 2008 +0100 |
| |
| microblaze: add Emaclite ethernet driver |
| |
| commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:04:01 2008 +0100 |
| |
| microblaze: ML401 and XUPV2P remove emac and emaclite reference |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 10:59:32 2008 +0100 |
| |
| microblaze: remove old setting for emac driver |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 10:58:15 2008 +0100 |
| |
| microblaze: Clean Makefile from ancient emac driver |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit ab68f921d9c741830f721c3d879c13a0c5597183 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 10:20:43 2008 +0100 |
| |
| SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 6ed8a43a19bb0275501bc286007daafa923552cf |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 23:38:48 2008 +0100 |
| |
| SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 23:34:47 2008 +0100 |
| |
| SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 823edd8a66ed50af5aaba0c79567f67061e4d79a |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 10:06:52 2008 +0100 |
| |
| SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 23:26:48 2008 +0100 |
| |
| SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit b330990c2f36ee4a8bb318360e1c8ba965269ab6 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 10:00:33 2008 +0100 |
| |
| SPARC: Added support for SPARC LEON2 SOC Processor. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 23:00:38 2008 +0100 |
| |
| SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 22:51:29 2008 +0100 |
| |
| SPARC: Added support for SPARC LEON3 SOC processor. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit bf3d8b31169546fcddb4737391e1893fb12d033a |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 08:29:26 2008 +0100 |
| |
| SPARC: added SPARC support for new uimage in common code. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 00ab32c85405a4fe65fd4128243086210fc90a21 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 22:36:03 2008 +0100 |
| |
| SPARC: added SPARC board information to the command bdinfo. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit c2f02da21a3f37f0878554eebc785e04fdc4e128 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 09:47:00 2008 +0100 |
| |
| SPARC: Added generic support for SPARC architecture. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit e54ec0f016803e4d9524ff71f7971bda0c51b287 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Apr 3 14:50:34 2008 +0200 |
| |
| ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3 |
| |
| This patch fixes a problem with the RGMII setup of the 460GT. The 460GT |
| has 2 RGMII instances and we need to configure the 2nd RGMII instance |
| for the EMAC2+3 channels. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c2a545ce33b26d80337f80b533828839249fb1c9 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 2 08:03:56 2008 +0200 |
| |
| MPC8xx: Fix libfdt support introduced in commit 77ff7b74 |
| |
| fdt.c: In function 'ft_cpu_setup': |
| fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32' |
| fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32' |
| fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet' |
| fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Mar 31 20:45:56 2008 -0500 |
| |
| Fix fdt set command to conform to dts spec |
| |
| The fdt set command was treating properties specified as <00> and <0011> |
| as byte streams, rather than as an array of cells. As we already have |
| syntax for expressing the desire for a stream of bytes ([ xx xx ...]), |
| we should use the <> syntax to describe arrays of cells, which are always |
| 32-bits per element. If we imagine this likely (IMHO) scenario: |
| |
| > fdt set /ethernet-phy@1 reg <1> |
| |
| With the old code, this would create a bad fdt, since the reg cell would be |
| made to be one byte in length. But the cell must be 4 bytes, so this would |
| break mysteriously. |
| |
| Also, the dts spec calls for constants inside the angle brackets (<>) |
| to conform to C constant standards as they pertain to base. |
| Take this scenario: |
| |
| > fdt set /ethernet@f00 reg <0xe250000\ 0x1000> |
| |
| The old fdt command would complain that it couldn't parse that. Or, if you |
| wanted to specify that a certain clock ran at 33 MHz, you'd be required to |
| do this: |
| |
| > fdt set /mydev clock <1f78a40> |
| |
| Whereas the new code will accept decimal numbers. |
| |
| While I was in there, I extended the fdt command parser to handle property |
| strings which are split across multiple arguments: |
| |
| > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 > |
| > fdt p /ethernet@f00 |
| ethernet@f00 { |
| interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>; |
| }; |
| |
| Lastly, the fdt print code was rearranged slightly to print arrays of cells |
| if the length of the property is a multiple of 4 bytes, and to not print |
| leading zeros. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 2 08:39:33 2008 +0200 |
| |
| ppc4xx: Canyonlands: Init SATA/PCIe port correctly |
| |
| Canyonlands (460EX) shares the first PCIe interface with the SoC SATA |
| interface. This usage can be configured with the jumper J6. This patch |
| correctly configures the SATA/PCIe PHY for SATA usage when this jumper |
| is installed. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6fe2946f198481254a6ee9600d7456b8316a4083 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 17:37:49 2008 -0500 |
| |
| remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code |
| |
| finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d, |
| "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T" |
| started. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b5873f1732b92a25690e1513b90dfb0d644f6697 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Apr 1 07:30:51 2008 +0200 |
| |
| dataflash: Move CONFIG_HAS_DATAFLASH to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2d934ea51f276522b532f870a820e844ff480b5b |
| Author: Tor Krill <tor@excito.com> |
| Date: Fri Mar 28 15:29:45 2008 +0100 |
| |
| Add Vitesse 8601 support to TSEC driver |
| |
| Add phy_info for Vitesse VSC8601. |
| Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation. |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| Reviewed-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Mon Mar 31 14:25:00 2008 +0000 |
| |
| SPARC: added SMC91111 driver in and out macros for LEON processors. |
| |
| This patch makes SPARC/LEON processors able to read and write |
| to the SMC91111 chip using the chip external I/O bus of the memory |
| controller. This patchs defines the standard in and out macros |
| expected by the SMC9111 driver. |
| |
| To access that I/O bus one must set up the memory controller |
| (MCTRL or FTMCTRL) correctly. It is assumed that the user sets |
| up this correctly when the other MCTRL parameters are set up. It |
| can be set up from the board configuration header file. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 18:52:34 2008 +0100 |
| |
| Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Mar 31 21:31:04 2008 +0200 |
| |
| AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 18:52:33 2008 +0100 |
| |
| Add support for AT91SAM9260EK |
| |
| Support for booting from internal DataFlash, external DataFlash card |
| or NAND flash is available. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 1762f13b4aab88b685b1722f17dada247945624b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Mar 31 21:20:49 2008 +0200 |
| |
| AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 761712188b353494defb2b644491ff73d0daaa6f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Mar 31 21:12:17 2008 +0200 |
| |
| AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 20:52:32 2008 +0100 |
| |
| Port AT91CAP9 to the new headers |
| |
| Adapt the existing AT91CAP9 code to the new headers and APIs. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 19:52:31 2008 +0100 |
| |
| Finish header files reworking |
| |
| Replace AT91CAP9.h file with several splitted header files coming |
| from the Linux kernel. |
| |
| This is part 2 of the replacement: more header imports and edits. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 19:52:30 2008 +0100 |
| |
| Import several header files from Linux |
| |
| Replace AT91CAP9.h file with several splitted header files coming |
| from the Linux kernel. |
| |
| This is part 1 of the replacement: pristine header files import. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit a8a78f2d99dc1bd30dc3595da118539b506c6118 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 20:52:28 2008 +0100 |
| |
| Move at91cap9 specific files to at91sam9 directory |
| |
| AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a |
| common infrastructure can be used. Let this infrastructure be |
| named after the AT91SAM9 family, and move the existing AT91CAP9 |
| files to the new place. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 61106a565870ff503f92b251b94bd7afef889a04 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 21:52:27 2008 +0100 |
| |
| Use timer_init() instead of board supplied interrupt_init() |
| |
| The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by |
| the board, so use timer_init() instead of interrupt_init(). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 5604e2178c5218fbfdba2e4293ca7652e829ac25 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 21:52:36 2008 +0100 |
| |
| Cleanup DataFlash partition handling |
| |
| DataFlash partition information has become a mess. This patch |
| defines a single partition scheme for Atmel DataFlashes. This partition |
| scheme will be used by all AT91CAP9 and AT91SAM9 boards. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Fri Mar 28 08:47:45 2008 -0500 |
| |
| ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S |
| |
| When the version_string function in start.S is not 4-byte align, |
| it will cause the compiler generates "unaligned opcodes detected |
| in executable segment". This issue affects all ColdFire CPUs. |
| By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if |
| it is not aligned. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit bae61eefe15b4d454060a7140e49ae58322be803 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Mar 25 15:41:15 2008 -0500 |
| |
| ColdFire: Add dspi and serial flash support for MCF5445x |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 48ead7a7a922fceaf494e352abfab8216a41b417 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Mar 18 17:37:01 2008 -0500 |
| |
| ColdFire: Remove R5200 board |
| |
| This board never went into production |
| |
| Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com> |
| Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8 |
| Author: Matthew Fettke <[matthew.fettke@gmail.com]> |
| Date: Thu Jan 24 14:02:32 2008 -0600 |
| |
| ColdFire: Added M5275EVB support. |
| |
| Signed-off-by: Matthew Fettke <mfettke@videon-central.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b |
| Author: Matthew Fettke <[matthew.fettke@gmail.com]> |
| Date: Mon Feb 4 15:38:20 2008 -0600 |
| |
| ColdFire: Added MCF5275 cpu support. |
| |
| Signed-off-by: Matthew Fettke <mfettke@videon-central.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Mar 17 12:14:11 2008 -0500 |
| |
| ColdFire: Define bootdelay in configuration file for M52277EVB |
| |
| Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com> |
| Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 77878f16cedee17161ff2336990970fffc6cea35 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Mar 17 12:09:07 2008 -0500 |
| |
| ColdFire: Fix second memory Chipselect for M5475EVB |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 43d60642395a550956cb21d287c8cfa563913d28 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Mar 13 14:26:32 2008 -0500 |
| |
| ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282 |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit eb14ebe813a0cb5d47905228da446a5ad692473b |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Sun Mar 30 20:33:04 2008 -0500 |
| |
| ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 02e3892021112f21067d9ed1d04ae4182725ba52 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Mar 31 12:20:48 2008 +0200 |
| |
| ppc4xx: Small whitespace fix of esd patches |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 034394abb524785047c815f00dde8cdbdc1593c5 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Mar 30 18:52:44 2008 +0200 |
| |
| ppc4xx: Cleanup PMC440 board support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit a6cc6c37188d85c25d167a4515da86f48d9a583e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Mar 30 18:52:06 2008 +0200 |
| |
| ppc4xx: Add ptm configuration variables for PMC440 |
| |
| Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms |
| environment variables. |
| |
| Cleanup pci_target_init. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 7c91f51a2fe296909147f1646a1412729dd10b1d |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Mar 30 18:01:15 2008 +0200 |
| |
| ppc4xx: Minor updates for DU440 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d5bffeb868d6b4d462f558dac43011027b6644b7 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:54:20 2008 -0500 |
| |
| Blackfin: cleanup and overhaul common board init functions |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b86b3416f874358acaf07519e7620cdb2145f75b |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:50:58 2008 -0500 |
| |
| Blackfin: cleanup lib_blackfin/cache.c |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Mar 30 15:46:13 2008 -0400 |
| |
| Blackfin: unify cpu and boot modes |
| |
| All of the duplicated code for Blackfin processors and boot modes have been |
| unified. After all, the core is the same for all processors, just the |
| peripheral set differs (which gets handled in the drivers). |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 880cc4381ea8360248cddcdf87a64566745a5724 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 22:52:35 2008 +0100 |
| |
| Fix CFG_NO_FLASH compilation. |
| |
| Many Atmel boards have no "real" (NOR) flash on board, and rely only |
| on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to |
| be present in a board configuration file, while still enabling flash |
| commands like 'flinfo', 'protect', etc. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 9ce7e53abd039decea1af67aec81bbd5df7a2593 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:58:13 2008 -0500 |
| |
| Blackfin: BF537-stamp: cleanup spi flash driver |
| |
| This punts the old spi flash driver for a new/generalized one until the |
| common one can be integrated. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Mar 30 11:34:34 2008 -0400 |
| |
| Fix macro typo in common/cmd_mii.c |
| |
| This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I |
| actually applied the wrong patch. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Mar 30 16:39:53 2008 +0200 |
| |
| use correct at91rm9200 register name in m501sk board |
| |
| This fixes a naming bug for at91rm9200 lowlevel init code: |
| NOR boot flash is on chipselect 0, not chipselect 2. This |
| makes code use the register name from chip datasheets. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 480ed1dea103a1c8f4591afc77d2de3c7868d983 |
| Author: David Brownell <david-b@pacbell.net> |
| Date: Fri Jan 18 12:55:00 2008 -0800 |
| |
| use correct at91rm9200 register name |
| |
| This fixes a naming bug for at91rm9200 lowlevel init code: |
| NOR boot flash is on chipselect 0, not chipselect 2. This |
| makes code use the register name from chip datasheets. |
| |
| Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> |
| |
| commit a3543d6dc52b0ba9c64016687cf32d600b31a476 |
| Author: David Brownell <david-b@pacbell.net> |
| Date: Fri Jan 18 12:45:45 2008 -0800 |
| |
| add missing ARM boards to MAKEALL |
| |
| Add some missing ARM boards to MAKEALL. These build correctly, |
| unlike several of the boards already listed. |
| |
| Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> |
| |
| commit 066bebd6353e33af3adefc3404560871699e9961 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Sun Mar 30 11:34:09 2008 +0100 |
| |
| Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c |
| to prevent compilation error. |
| |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| |
| commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 |
| Author: Guennadi Liakhovetski <[lg@denx.de]> |
| Date: Sun Mar 30 11:32:30 2008 +0100 |
| |
| Support for the MX31ADS evaluation board from Freescale |
| |
| This patch adds support for the MX31ADS evaluation board from Freescale, |
| initialization code is copied from RedBoot sources, also provided by Freescale. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit c88ae20580b2b01487b4cdcc8b2a113f551aee36 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:32:27 2008 +0100 |
| |
| Phytec Phycore-i.MX31 support |
| |
| This patch adds support for the Phytec Phycore-i.MX31 board |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit a147e56f03871bba4f05058d5e04ce7deb010b04 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:32:24 2008 +0100 |
| |
| mx31 litekit support |
| |
| This patch adds support for the mx31 litekit board |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit d6674e0e2a6a1f033945f78838566210d3f28c95 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:32:21 2008 +0100 |
| |
| add SMSC LAN9x1x Network driver |
| |
| This patch adds a driver for the following smsc network controllers: |
| LAN9115 |
| LAN9116 |
| LAN9117 |
| LAN9215 |
| LAN9216 |
| LAN9217 |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 8c8463cce44d849e37744749b32d38e1dfb12e50 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:32:16 2008 +0100 |
| |
| add an i2c driver for mx31 |
| |
| This patch adds an i2c driver for Freescale i.MX processors |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:30:43 2008 +0100 |
| |
| core support for Freescale mx31 |
| |
| This patch adds the core support for Freescale mx31 |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 8bf69d81782619187933a605f1a95ee1d069478d |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:28:46 2008 +0100 |
| |
| Separate omap24xx specific code from arm1136 |
| |
| Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Sun Mar 30 11:23:05 2008 +0100 |
| |
| Add pmdra into MAKEALL |
| |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| |
| commit a574a73852a527779234e73e17e7597fd8128882 |
| Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> |
| Date: Sun Mar 30 11:21:58 2008 +0100 |
| |
| Adds support for the Prodrive PMDRA board, based on a DM6441 |
| |
| Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> |
| |
| commit 1377b5583a48021d983e1fd565f7d40c89e84d63 |
| Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> |
| Date: Sun Mar 30 11:11:34 2008 +0100 |
| |
| Removes all board specific code from the arch. part for DM644x (DaVinci) boards |
| |
| Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> |
| |
| commit 1704dc20917b4f71e373e2c888497ee666d40380 |
| Author: Dirk Behme <dirk.behme@gmail.com> |
| Date: Sun Mar 30 11:09:01 2008 +0100 |
| |
| - Remove *_masked() functions as noted by Wolfgang |
| - Adapt register naming to recent TI spec (sprue26, March 2007) |
| - Fix reset_timer() handling |
| - As reported by Pieter [1] the overflow fix introduced a |
| delay of factor 16 (e.g 2 seconds became 32). While the |
| overflow fix is basically okay, it missed to divide udelay by |
| 16, too. Fix this. |
| [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 |
| - Remove software division of timer count value (DIV(x) |
| macro) and do it in hardware (TIM_CLK_DIV). |
| Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> |
| and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for |
| the hints & testing! |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> |
| |
| commit ac3315c26e143c31680750c9c13f027efbcc887e |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Thu Mar 6 16:45:44 2008 +0100 |
| |
| new PHY @ e1000 - 2nd try |
| |
| Add 82541ER device with latest integrated IGP2 PHY. |
| Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 20:22:53 2008 +0100 |
| |
| SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver. |
| |
| GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without |
| a debug link (EDCL). The GRETH core is documented in GRIP.pdf |
| available at www.gaisler.com. |
| |
| If the GRETH has GigaBit support (GBIT, Scatter gather, checksum |
| offloading etc.) can be determined by a bit in the control register. |
| The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 233a8bcd94997f3f345833a3b82e836222f2a206 |
| Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Mar 17 17:08:22 2008 -0500 |
| |
| Add CONFIG_MII_INIT in cmd_mii.c |
| |
| Provide common configuration in do_mii() to execute mii_init() |
| for all cpu architectures |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f605479de2deb11e834f31dfdb0af107c86aced6 |
| Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Mar 17 17:08:16 2008 -0500 |
| |
| ColdFire: Fix FEC transmit issue for MCF5275 |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746 |
| Author: Aras Vaichas <arasv@magtech.com.au> |
| Date: Wed Mar 26 09:43:57 2008 +1100 |
| |
| DHCP request fix for Windows Server 2003 |
| |
| Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional |
| delay before sending "DHCP Request" in net/bootp.c. Required to overcome |
| interoperability problems with Windows Server 200x DHCP server when U-Boot |
| client responds too fast for server to handle. |
| |
| Signed-off-by: Aras Vaichas <arasv@magtech.com.au> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 97bf85d784fbed485e652eb907589ad0d5cb7262 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 20:40:19 2008 +0100 |
| |
| MTD/CFI: flash_read64 is defined a weak function (for SPARC) |
| |
| SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address. |
| SPARC CPUs implement flash_read64 which calls __raw_readq. |
| |
| For current SPARC architectures (LEON2 and LEON3) each read from the |
| FLASH must lead to a cache miss. This is because FLASH can not be set |
| non-cacheable since program code resides there, and alternatively disabling |
| cache is poor from performance view, or doing a cache flush between each |
| read is even poorer. |
| |
| Forcing a cache miss on a SPARC is done by a special instruction "lda" - |
| load alternative space, the alternative space number (ASI) is processor |
| implementation spcific and can be found by including <asm/processor.h>. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 70431e8a7393b6b793f77957f95b999fc9a269b8 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Fri Mar 28 15:41:25 2008 +0100 |
| |
| Make MPC83xx one step closer to full relocation. |
| |
| Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx |
| and use GOT relative reference. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5b2793a3f3de34d439232b05acc8af67a028fd35 |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Thu Mar 27 14:34:43 2008 -0400 |
| |
| mpc8323erdb: fix EEPROM page size and get MAC from EEPROM |
| |
| This patch fixes eeprom page size so that you can now write more than |
| 64 bytes at a time. |
| |
| It also makes the board take MAC addresses, if found, from EEPROM. |
| |
| User should place up to 4 addresses at offset 0x7f00, for |
| eth{,1,2,3}addr. Any unused addresses should be zero. This group of |
| four six-byte values should have it's CRC at the end. crc32 and |
| eeprom commands can be used to accomplish this. |
| |
| If CRC fails, MAC addresses come from the environment. If CRC |
| succeeds, the environment is overwritten at startup. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8f325cff31f6e745e6540014b131b9a97f61944c |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Fri Mar 28 15:15:38 2008 -0400 |
| |
| mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE |
| |
| Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB |
| controller on the PCI bus in Linux on the MPC8323ERDB. |
| |
| This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's |
| config file. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 10:19:07 2008 -0500 |
| |
| mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code |
| |
| in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, |
| 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing |
| and processor ID display. Add REVID_{MAJ,MIN}OR macros to make |
| REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR |
| convenience macros. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 10:18:53 2008 -0500 |
| |
| mpc83xx: display ddr frequency in board_add_ram_info banner |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 10:18:40 2008 -0500 |
| |
| mpc83xx: unreinvent mem_clk |
| |
| delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to |
| mem_*_clk for consistency's sake. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 14:31:23 2008 -0500 |
| |
| mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:57:19 2008 +0800 |
| |
| mpc83xx: enable the SATA interface on mpc837xemds board |
| |
| Enable the first two SATA interfaces on MPC837xEMDS board, |
| The two SATA ports are on LYNX1. (SATA0/1 on J4/5) |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:56:36 2008 +0800 |
| |
| mpc83xx: initialize serdes for MPC837xEMDS boards |
| |
| This patch is stolen from Anton Vorontsov's patch |
| for mpc837xerdb boards. |
| |
| The reference clk and xcorevdd voltage of serdes1/2 |
| is same between mpc837xemds and mpc837xerdb. |
| |
| 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE |
| 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE |
| 8379E: LYNX1- 2 SATA LYNX2- 2 SATA |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit cc8e839abc80887ae832767b5930d40edd6d7eb7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 28 14:09:04 2008 +0100 |
| |
| ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision |
| |
| Canyonlands (460EX) shares the first PCIe interface with the SoC SATA |
| interface. This usage can be configured with the jumper J6. This patch |
| displays the current configuration upon bootup and changes the PCIe |
| init loop, to only initialize the availabel PCIe slots. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 90447ecbbac8572457b6d8903073ac3f120995ba |
| Author: Tor Krill <tor@excito.com> |
| Date: Fri Mar 28 11:29:10 2008 +0100 |
| |
| MTD/CFI: Add support for 16bit legacy AMD flash |
| |
| Add entry for 512Kx16 AMD flash to jedec_table. |
| Read out 16bit device id if chipwidth is 16bit. |
| Fixed coding style after Stefans feedback |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| |
| commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 28 11:02:53 2008 +0100 |
| |
| ppc: Small change to CFG_MEM_TOP_HIDE description |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Mar 27 15:44:12 2008 +0900 |
| |
| sh: Add support stat structure and stat.h |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09 |
| Author: Mark Jonas <toertel@gmail.com> |
| Date: Sat Mar 22 19:27:52 2008 +0100 |
| |
| sh: Removed warning when compiling drivers/serial/serial_sh.c. |
| |
| Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f309fa38929ffba71230c02330ffa42f4bba6333 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Mar 12 18:02:57 2008 +0900 |
| |
| sh: Remove disable_ctrlc function from R7780MP |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Mar 12 17:55:15 2008 +0900 |
| |
| sh: Add maintainer of R7780MP to MAINTAINER file |
| |
| Update MAINTAINER entry for R7780MP. And fix maintainer's name. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f5e2466f7baa887a7df0c536333eea8231333497 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Mar 25 17:11:24 2008 +0900 |
| |
| sh: Add support Renesas Solutions R2D plus board |
| |
| R2D plus is SH reference board used with SH7751R. |
| This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface, |
| one PCI bus, VGA, and two Ethernet controller. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit e92c95180bb5bc5fd4051598a9d60beaba48988d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Mar 12 12:15:29 2008 +0900 |
| |
| sh: Add support SH4 cache control |
| |
| Add support SH4 cache control and flash_cache function |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 28e5efde4d925fcb34901d0030d0648de2da7e89 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Mon Mar 24 01:53:01 2008 +0900 |
| |
| sh: Add support PCI host driver for SH7751/SH7751R |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Mon Mar 24 02:11:26 2008 +0900 |
| |
| sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 566933278101c144d75361ea682678a326c1290d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Mar 12 12:10:28 2008 +0900 |
| |
| sh: Add support SuperH SH7751/SH7751R |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 3313e0e26224fc9a0c445124f3455058c696df84 |
| Author: Mark Jonas <toertel@gmail.com> |
| Date: Mon Mar 10 11:37:10 2008 +0100 |
| |
| sh: Added support for SH7720 based board MPR2. |
| |
| Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Mar 6 14:05:53 2008 +0900 |
| |
| sh: Fix receive FIFO level register of SH4A |
| |
| Receive FIFO level register is different in SH4A. |
| Because register is different, cannot occasionally receive data. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c133c1fb0b590662206b0eba70f4478ee0300a9a |
| Author: Yusuke Goda <goda.yusuke@renesas.com> |
| Date: Tue Mar 11 12:55:12 2008 +0900 |
| |
| sh: Add support Renesas Solutions R7780MP |
| |
| Renesas Solutions R7780MP is a reference board on SH7780. |
| This board has serial, 10/100 base Ethernet deivice, CF slot |
| and VGA devices. This board can set extension board. |
| Extension board has 10/100/1000 base Ethernet device, PCI slot, |
| S-ATA, iDVR slot. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28 |
| Author: Yusuke Goda <goda.yusuke@renesas.com> |
| Date: Wed Mar 5 14:30:02 2008 +0900 |
| |
| sh: Add support PCI of SuperH and SH7780 |
| |
| This patch add support PCI of SuperH base code and SH7780 specific code. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b55523efff2ae11f0b9ae3cc405893c32eb78156 |
| Author: Yusuke Goda <goda.yusuke@renesas.com> |
| Date: Wed Mar 5 14:23:26 2008 +0900 |
| |
| sh: Add support SH7780 |
| |
| SH7780 is CPU of Renesas Technology. |
| This CPU has |
| - CPU clock 400MHz |
| - PCI support |
| - DDR-SDRAM controller |
| - etc ... |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c2042f5952a686c414031309b8f244513bf578f0 |
| Author: goda.yusuke <goda.yusuke@renesas.com> |
| Date: Fri Jan 25 20:46:36 2008 +0900 |
| |
| sh: Add support Renesas Solutions Migo-R board |
| |
| Migo-R is a board based on SH7722 and has may devices. |
| In this patch, supported SCIF, NOR flash and Ethernet. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 74d1e66d22dac91388bc538b2fe19f735edc5b82 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 27 15:06:40 2008 +0100 |
| |
| Fix host tool build breakage, take two |
| |
| Revert commit 87c8431f and fix build breakage so that the build continues |
| to work on FC systems. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 09:36:47 2008 +0100 |
| |
| ppc4xx: Enable ECC on LWMON5 |
| |
| Since all ECC related problems seem to be resolved on LWMON5, this patch |
| now enables ECC support. |
| |
| We have to write the ECC bytes by zeroing and flushing in smaller |
| steps, since the whole 256MByte takes too long for the external |
| watchdog. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Mon Mar 17 11:10:35 2008 -0500 |
| |
| ppc4xx: Updates to Korat-specific code |
| |
| This patch contains updates for changes for the Korat PPC440EPx board. |
| These changes include: |
| |
| (1) Support for "permanent" and "upgradable" copies of U-Boot, as |
| described in the new "doc/README.korat" file; |
| |
| (2) a new memory map for the registers in the board's CPLD; |
| |
| (3) a revised format for manufacturer's data in serial EEPROM; and |
| |
| (4) changes to track updates to U-Boot for the Sequoia board. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit f766cdf89b3a2a7634b8c5869f606150e332036c |
| Author: Markus Brunner <super.firetwister@gmail.com> |
| Date: Thu Mar 27 10:46:25 2008 +0100 |
| |
| ppc4xx: PPC405EP Set EMAC noise filter bits |
| |
| This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 |
| which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally |
| disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set. |
| |
| Signed-off-by: Markus Brunner <super.firetwister@gmail.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991 |
| Author: Mike Nuss <mike@terascala.com> |
| Date: Wed Feb 20 11:54:20 2008 -0500 |
| |
| ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx |
| |
| On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured |
| after startup to change the speed of the clocks. This patch adds the |
| option CFG_PLL_RECONFIG. If this option is set to 667, the CPU |
| initialization code will reconfigure the PLL to run the system with a CPU |
| frequency of 667MHz and PLB frequency of 166MHz, without the need for an |
| external EEPROM. |
| |
| Signed-off-by: Mike Nuss <mike@terascala.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu Mar 27 09:12:40 2008 +0100 |
| |
| new-image: Fix host tool build breakage |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 6fb4b640562a10daff0dbe537638d511b5b48650 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 27 10:24:03 2008 +0100 |
| |
| ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9462732a3ec551c11862450902cd8ee1bedea6d9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 10:23:43 2008 +0100 |
| |
| ppc4xx: Add fdt support to Prodrive alpr |
| |
| Since this board will probably be ported to arch/powerpc in the |
| near future, we add device tree support now. This way we are |
| "ready" for arch/powerpc from now on. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150 |
| Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl> |
| Date: Mon Mar 17 09:27:56 2008 +0100 |
| |
| ppc4xx: Enable cache support on the ALPR board |
| |
| Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> |
| |
| commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 26 10:14:11 2008 +0100 |
| |
| ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched" |
| |
| If CFG_MEM_TOP_HIDE is defined in the board config header, this specified |
| memory area will get subtracted from the top (end) of ram and won't get |
| "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel |
| should gets passed the now "corrected" memory size and won't touch it |
| either. This should work for arch/ppc and arch/powerpc. Only Linux board |
| ports in arch/powerpc with bootwrapper support, which recalculate the |
| memory size from the SDRAM controller setup, will have to get fixed |
| in Linux additionally. |
| |
| This patch enables this config option on some PPC440EPx boards as a workaround |
| for the CHIP 11 errata. Here the description from the AMCC documentation: |
| |
| CHIP_11: End of memory range area restricted access. |
| Category: 3 |
| |
| Overview: |
| The 440EPx DDR controller does not acknowledge any |
| transaction which is determined to be crossing over the |
| end-of-memory-range boundary, even if the starting address is |
| within valid memory space. Any such transaction from any PLB4 |
| master will result in a PLB time-out on PLB4 bus. |
| |
| Impact: |
| In case of such misaligned bursts, PLB4 masters will not |
| retrieve any data at all, just the available data up to the |
| end of memory, especially the 440 CPU. For example, if a CPU |
| instruction required an operand located in memory within the |
| last 7 words of memory, the DCU master would burst read 8 |
| words to update the data cache and cross over the |
| end-of-memory-range boundary. Such a DCU read would not be |
| answered by the DDR controller, resulting in a PLB4 time-out |
| and ultimately in a Machine Check interrupt. The data would |
| be inaccessible to the CPU. |
| |
| Workaround: |
| Forbid any application to access the last 256 bytes of DDR |
| memory. For example, make your operating system believe that |
| the last 256 bytes of DDR memory are absent. AMCC has a patch |
| that does this, available for Linux. |
| |
| This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards: |
| lwmon5, korat, sequoia |
| |
| The other remaining 440EPx board were intentionally not included |
| since it is not clear to me, if they use the end of ram for some |
| other purpose. This is unclear, since these boards have CONFIG_PRAM |
| defined and even comments like this: |
| |
| PMC440.h: |
| /* esd expects pram at end of physical memory. |
| * So no logbuffer at the moment. |
| */ |
| |
| It is strongly recommended to not use the last 256 bytes on those |
| boards too. Patches from the board maintainers are welcome. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 27 10:09:05 2008 +0100 |
| |
| ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d56a3ce179688cde61073a3690e21703d68fafd7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 25 17:51:13 2008 +0100 |
| |
| ppc4xx: Correctly pass phyiscal FLASH base address into dtb |
| |
| The routine ft_board_setup() configures the EBC NOR mappings for the |
| Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from |
| 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS |
| problem, we need to pass the corrected address here too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ad31989de12ce5c67b07c4867ead47465655c4b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 16:35:12 2008 +0100 |
| |
| ppc4xx: Fix compilation warning in 4xx_enet.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4c9e855734c523900322a7c3cdd9099b4f51b51d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 16:20:49 2008 +0100 |
| |
| ppc4xx: Add AMCC Glacier 406GT eval board support |
| |
| This patch adds support for the AMCC Glacier 460GT eval board. |
| The main difference to the Canyonlands board are listed here: |
| |
| - 4 ethernet ports instead of 2 |
| - no SATA port |
| - no USB port |
| |
| Currently EMAC2+3 are not working. This will be fixed in a later |
| release. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d8bd643141af4710d7f1b69bbab6b760de0af0a1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 27 08:47:26 2008 +0100 |
| |
| ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b9670dd85be6e0496ef2e231043c23cad9b1d903 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Mar 26 21:05:43 2008 +0100 |
| |
| Fix out of tree building issue |
| |
| Currently U-Boot building in some external directory |
| doesn't work. This patch tries to fix the problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit d4ee711d8a5c366ee3f857c26b927d12e66614ff |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Mar 26 18:13:33 2008 +0100 |
| |
| README: update documentation (availability, links, etc.) |
| |
| Fix typo in README |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Mar 26 17:47:44 2008 +0100 |
| |
| Fix compilation error in cmd_usb.c |
| |
| This patch fixes compilation error |
| cmd_usb.c: In function 'do_usb': |
| cmd_usb.c:552: error: void value not ignored as it ought to be |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit d8c82db482d6b535d12b419d6440b88bf7091c9b |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Mar 14 17:45:29 2008 -0500 |
| |
| Add support for setting the I2C bus speed in fsl_i2c.c |
| |
| Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying |
| the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, |
| but fsl_i2c.c ignores it and uses conservative value when programming the |
| I2C bus speed. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 27 00:03:57 2008 +0100 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:55:32 2008 +0800 |
| |
| drivers: add the support for Freescale SATA controller |
| |
| Add the Freescale on-chip SATA controller driver to u-boot, |
| The SATA controller is used on the 837x and 8315 targets, |
| The driver can be used to load kernel, fs and dtb. |
| |
| The features list: |
| - 1.5/3 Gbps link speed |
| - LBA48, LBA28 support |
| - DMA and FPDMA support |
| - Two ports support |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit bede87f4c87c3ccd868cc60ebf792e0560c6d024 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:54:44 2008 +0800 |
| |
| ata: add the readme for SATA command line |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit cd54081cd479e542fc399b8a40651ff11a1ad849 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:53:24 2008 +0800 |
| |
| ata: enable the sata initialize on boot up |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 69386383c5c2b323c66495b0b0cef6a9714d83bf |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:52:36 2008 +0800 |
| |
| ata: add the fis struct for SATA |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:51:44 2008 +0800 |
| |
| ata: add the libata support |
| |
| add simple libata support in u-boot |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 8e9bb43429e50df55fa41932cbe65841ff579220 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:50:45 2008 +0800 |
| |
| ata: make the ata_piix driver using new SATA framework |
| |
| original ata_piix driver is using IDE framework, not real |
| SATA framework. For now, the ata_piix driver is only used |
| by x86 sc520_cdp board. This patch makes the ata_piix driver |
| use the new SATA framework, so |
| |
| - remove the duplicated command stuff |
| - remove the CONFIG_CMD_IDE define in the sc520_cdp.h |
| - add the CONFIG_CMD_SATA define to sc520_cdp.h |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:49:44 2008 +0800 |
| |
| ata: add the support for SATA framework |
| |
| - add the SATA framework |
| - add the SATA command line |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:48:18 2008 +0800 |
| |
| ata: merge the header of ata_piix driver |
| |
| move the sata.h from include/ to drivers/block/ata_piix.h |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 9eef62804d9695425b24c87b46a61a7fa74afee0 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:47:06 2008 +0800 |
| |
| ata: merge the ata_piix driver |
| |
| move the cmd_sata.c from common/ to drivers/ata_piix.c, |
| the cmd_sata.c have some part of ata_piix controller drivers. |
| consolidate the driver to have better framework. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit b9e749e95354f33eb5dc6653c6db7d502adb95fe |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Mar 26 18:26:43 2008 +0100 |
| |
| USB, Storage: fix a bug introduced in commit |
| f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info |
| to only print only information on one storage device, but not for |
| multiple. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Mar 26 17:47:44 2008 +0100 |
| |
| Fix compilation error in cmd_usb.c |
| |
| This patch fixes compilation error |
| cmd_usb.c: In function 'do_usb': |
| cmd_usb.c:552: error: void value not ignored as it ought to be |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Mar 26 08:53:53 2008 -0500 |
| |
| 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page |
| |
| Provide a board_lmb_reserve helper function to ensure we reserve |
| the page of memory we are using for the boot page translation code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 79679d80021ab095e639e250ca472fe526da02e2 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Mar 26 08:34:25 2008 -0500 |
| |
| 85xx: Update multicore boot mechanism to ePAPR v0.81 spec |
| |
| The following changes are needed to be inline with ePAPR v0.81: |
| |
| * r4, r5 and now always set to 0 on boot release |
| * r7 is used to pass the size of the initial map area (IMA) |
| * EPAPR_MAGIC value changed for book-e processors |
| * changes in the spin table layout |
| * spin table supports a 64-bit physical release address |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 25eedb2c1958a13110c7de1fc809b624053cc69c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 19 15:02:07 2008 -0500 |
| |
| FSL: Clean up board/freescale/common/Makefile |
| |
| Each file that can be built here now follows some |
| CONFIG_ option so that they are appropriately built |
| or not, as needed. And CONFIG_ defines were added |
| to various board config files to make sure that happens. |
| |
| The other board/freescale/*/Makefiles no longer need |
| to reach up and over into ../common to build their |
| individually needed files any more. |
| |
| Boards that are CDS specific were renamed with cds_ prefix. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a5af4b358a7caa9c0aa374d4d894bf762ec37669 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 22:00:27 2008 -0600 |
| |
| 85xx: Fix merge duplication |
| |
| ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5893b3d0a4084f87a06a5d3dc03db91206818941 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Tue Feb 12 16:35:07 2008 -0600 |
| |
| 85xx: Expand CCSR space with more DDR controller registers. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Feb 8 18:05:08 2008 -0600 |
| |
| 85xx: Speed up get_ddr_freq() and get_bus_freq() |
| |
| get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were |
| called. However, get_sys_info() recalculates extraneous information when |
| called each time. Have get_ddr_freq() and get_bus_freq() return memoized |
| values from global_data instead. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e9ea679918fbc9a53fa2f2a904aac874ea736036 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Feb 8 16:46:27 2008 -0600 |
| |
| 85xx: Show DDR memory data rate in addition to the memory clock frequency. |
| |
| Show the DDR memory data rate in addition to the memory clock |
| frequency. For DDR/DDR2 memories the memory data rate is 2x the |
| memory clock. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 591933ca6eabc440e6ed6967233aaf56fce464a3 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Feb 8 16:44:53 2008 -0600 |
| |
| 85xx: get_tbclk() speed up and rounding fix |
| |
| Speed up get_tbclk() by referencing pre-computed bus clock |
| frequency value from global data instead of sys_info_t. Fix |
| rounding of result to nearest; previously it was rounding |
| upwards. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Feb 6 01:19:40 2008 -0600 |
| |
| Update SVR numbers to expand support |
| |
| FSL has taken to using SVR[16:23] as an SOC sub-version field. This |
| is used to distinguish certain variants within an SOC family. To |
| account for this, we add the SVR_SOC_VER() macro, and update the SVR_* |
| constants to reflect the larger value. We also add SVR numbers for all |
| of the current variants. Finally, to make things neater, rather than |
| use an enormous switch statement to print out the CPU type, we create |
| and array of SVR/name pairs (using a macro), and print out the CPU name |
| that matches the SVR SOC version. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b83eef440cf3cef816172ccbb5897ccd8e403cf3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Feb 6 01:12:57 2008 -0600 |
| |
| Add the Freescale PCI device IDs |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Feb 14 11:04:23 2008 -0600 |
| |
| 85xx: Added support for multicore boot mechanism |
| |
| Added the cpu command that provides a generic mechanism to get status, |
| reset, and release secondary cores in multicore processors. |
| |
| Added support for using the ePAPR defined spin-table mechanism on 85xx. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 16:48:33 2008 -0600 |
| |
| 85xx: Added support for multicore boot mechanism |
| |
| Added the cpu command that provides a generic mechanism to get status, |
| reset, and release secondary cores in multicore processors. |
| |
| Added support for using the ePAPR defined spin-table mechanism on 85xx. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f69766e4b5d47ecd3aa58677a8da875694f364f2 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 30 14:55:14 2008 -0600 |
| |
| 85xx: Add the concept of CFG_CCSRBAR_PHYS |
| |
| When we go to 36-bit physical addresses we need to keep the concept of |
| the physical CCSRBAR address seperate from the virtual one. |
| |
| For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 26 15:38:47 2008 +0100 |
| |
| Coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Wed Mar 26 13:02:13 2008 +0100 |
| |
| Add CFG_RTC_DS1337_NOOSC to turn off OSC output |
| |
| The default settings for RTC DS1337 keeps the OSC |
| output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to |
| turn it off. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit 438a4c11260b4ea9805039b0b4f92f9df5306b02 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 26 11:48:46 2008 +0100 |
| |
| Cleanup coding style, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 218ca724c08ca8a649f0917cf201cf23d4b33f39 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 26 10:40:12 2008 +0100 |
| |
| README: update documentation (availability, links, etc.) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 |
| Author: Aras Vaichas <arasv@magtech.com.au> |
| Date: Tue Mar 25 12:09:07 2008 +1100 |
| |
| USB Storage, add meaningful return value |
| |
| This patch changes the "usb storage" command to return success if it |
| finds a USB storage device, otherwise it returns error. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 18e69a35efbb078403db0c0063986470dad7d082 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Fri Mar 14 23:20:18 2008 +0300 |
| |
| 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role |
| |
| Linux understands "host" (default), "peripheral" and "otg" (broken). |
| Though, U-Boot doesn't restrict dr_mode variable to these values (think |
| of renames in future). |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c7604783b236e368f225efb7b3efb418fe20b404 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Fri Mar 14 23:20:30 2008 +0300 |
| |
| tsec: fix link detection for the RTL8211B PHY |
| |
| RTL8211B sets link state register after autonegotiation complete, |
| so with bootdelay=0 RTL8211B will report lack of the link. |
| |
| To fix this, we should wait for aneg to complete, even if the |
| link is currently down. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:47:09 2008 +0300 |
| |
| mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups |
| |
| device_type = "soc" is being deprecated, newer device trees will use |
| "fsl,soc" and/or "fsl,immr" for the soc nodes. |
| |
| This patch also adds clock-frequency property for soc nodes (the same |
| value as bus-frequency). |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07 |
| Author: Joe D'Abbraccio <ljd015@freescale.com> |
| Date: Mon Mar 24 13:00:59 2008 -0400 |
| |
| Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock |
| |
| With the original value of 1/2 clock cycle delay, the system ran relatively |
| stable except when we run benchmarks that are intensive users of memory. |
| When I run samba connected disk with a HDBENCH test, the system locks-up |
| or reboots sporadically. |
| |
| Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> |
| |
| commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Mar 24 12:44:13 2008 -0500 |
| |
| mpc83xx: Set PCI I/O bus-address base to zero. |
| |
| The device trees for these boards describe PCI I/O as starting from |
| address zero from the device's perspective. |
| |
| Placing I/O elsewhere may cause problems with certain PCI boards, and may |
| cause problems with Linux. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:47:05 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK |
| |
| At least on the "33MHz Pilot" board crystal is actually 33.3MHz. |
| This patch fixes "system time drifting" problem. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 3a0cfdd576dc9b16d1468d37339182607c697fb7 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:47:02 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS |
| |
| This is needed to update /choosen/linux,stdout-path properly. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:47:00 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: add dhcp command |
| |
| Plus modify environment to use it and remove bootfile env variable, |
| it is internal and CONFIG_BOOTFILE is used for these purposes. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:57 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc |
| |
| Current DDR setup easily causes memory corruption, this patch fixes it. |
| |
| Also fix TIMING_CFG0_MRS_CYC definition. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:53 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI |
| |
| This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen |
| controller and FHCI (QE USB). |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 7ad959490962e6842648d87d4bd795ea6cdcce67 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:51 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: add support for NAND |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 9a3e832aeb491861d029991241572ebdf4b5b61b |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:46 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode |
| |
| This is needed for BCM PHYs to work on this board. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:34 2008 +0300 |
| |
| uec: add support for Broadcom BCM5481 Gigabit PHY |
| |
| This patch adds basic support for Broadcom BCM5481 PHY. |
| |
| RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is |
| Peter Barada <peterb@logicpd.com>. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 6a600c3a1876bc203445df4f0fd6b12648259666 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:28 2008 +0300 |
| |
| uec: add support for RGMII_RXID interface mode |
| |
| PHY drivers will use it to setup software delay between RXD and RXC |
| signals. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:24 2008 +0300 |
| |
| uec: add support for gbit mii status readings |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:47 2008 +0300 |
| |
| 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards |
| |
| This is primarily for the early console support. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:43 2008 +0300 |
| |
| 83xx: initialize serdes for MPC837XRDB boards |
| |
| On the MPC8377ERDB: 2 SATA and 2 PCI-E. |
| On the MPC8378ERDB: 2 PCI-E |
| On the MPC8379ERDB: 4 SATA |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 453316a2a19642d8afcbca7452e40a6b44a197b1 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:32 2008 +0300 |
| |
| 83xx: serdes setup routines |
| |
| This patch adds few routines to configure serdes on 837x targets. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit a796cdf9c377cb4e5d61d1079a296608f8fbd903 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:27 2008 +0300 |
| |
| 83xx: split COBJS onto separate lines |
| |
| ..plus get rid of some #ifdefs in the .c files. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:23 2008 +0300 |
| |
| 83xx: nand support for MPC837XRDB boards |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 82e45a204190593e8613145a928f998fb8c909c4 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Tue Mar 18 21:44:41 2008 -0400 |
| |
| Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 0fa7a1b4719e325fce332689fb8754ec166191ff |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Thu Mar 20 13:15:39 2008 -0400 |
| |
| mpc8323erdb: remove RTC and add EEPROM |
| |
| There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5bbeea86eb6afb872374cd23217cb3c1018443ed |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Thu Mar 20 13:15:34 2008 -0400 |
| |
| mpc8323erdb: Improve the system performance |
| |
| The following changes are based on kernel UCC ethernet performance: |
| |
| 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode |
| 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT |
| switch to enable this setting. |
| |
| The following changes are based on the App Note AN3369 and |
| verified to improve memory latency using LMbench: |
| |
| 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0 |
| 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting |
| previously. |
| 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on |
| Twr=15ns, and this was already the setting in DDR_MODE) |
| 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on |
| Trp=15ns) |
| 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on |
| Tras=40ns) |
| 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on |
| Trcd=15ns) |
| 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on |
| Trfc=75ns) |
| 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based |
| on Tfaw=50ns) |
| 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based |
| on CL=3 and WL=2). |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit fc549c871f43933396a5b3e21d897023d4b31b8d |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Thu Mar 20 13:15:28 2008 -0400 |
| |
| mpc8323erdb: use readable DDR config macros |
| |
| Use available shift/mask macros to define DDR configuration. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 89c7784ed90ba50301eec521144f95111e472906 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Feb 8 13:15:55 2008 -0600 |
| |
| 83xx: Add Vitesse VSC7385 firmware uploading |
| |
| Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload |
| the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. |
| Cleaned up the board header files to make selecting the VSC7385 easier to |
| control. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Feb 8 13:15:54 2008 -0600 |
| |
| NET: Add Vitesse VSC7385 firmware uploading |
| |
| The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX |
| and other boards. A small firwmare must be uploaded to its on-board memory |
| before it can be enabled. This patch adds the code which uploads firmware |
| (but not the firmware itself). |
| |
| Previously, this feature was provided by a U-Boot application that was |
| made available only on Freescale BSPs. The VSC7385 firmware must still |
| be obtained separately, but at least there is no longer a need for a separate |
| application. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 26 00:52:10 2008 +0100 |
| |
| Coding Style cleanyp; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 43ddd9c820fec44816188f53346b464e20b3142d |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Sat Mar 22 14:23:49 2008 -0400 |
| |
| Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T |
| |
| These defines embedded the u-boot env variables and/or the bd_t structure |
| in the fdt blob. The conclusion of discussion on the u-boot email list |
| was that embedding these in the fdt blob is not useful: there are better |
| ways of passing the data (in fact, the fdt blob itself replaces the |
| bd_t struct). |
| |
| The only board that enables these is the stxxtc and they don't appear |
| to be used by linux. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 22ed2285743359fd1fe73e411dff914b2256e68f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Mar 17 10:49:25 2008 +0100 |
| |
| rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Mar 17 08:54:06 2008 +0900 |
| |
| Add Flex-OneNAND booting support |
| |
| Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array |
| using a NOR Flash interface. This on-chip integration enables system designers |
| to reduce external system logic and use high-density NAND Flash |
| in applications that would otherwise have to use more NOR components. |
| |
| Flex-OneNAND enables users to configure to partition it into SLC and MLC areas |
| in more flexible way. While MLC area of Flex-OneNAND can be used to store data |
| that require low reliability and high density, SLC area of Flex-OneNAND |
| to store data that need high reliability and high performance. Flex-OneNAND |
| can let users take advantage of storing these two different types of data |
| into one chip, which is making Flex-OneNAND more cost- and space-effective. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit c512389cc4a10253249271ff6c887c6dab1f0db2 |
| Author: André Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Thu Mar 13 13:50:52 2008 +0100 |
| |
| MPC5200: support setup without FEC |
| |
| Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is |
| defined. Systems without FEC, i.e. no FEC node in DTB, should be possible. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit aa3511e422946041ef626f80a05ae5e8bfc700e6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 18:05:46 2008 -0600 |
| |
| FSL: Move board/mpc8266ads under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7f1d846e5c5754449c286587d099d85246062772 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 18:05:47 2008 -0600 |
| |
| FSL: Move board/mpc7448hpc2 under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b7e24d283e34727c2a6cdfdac2e09a426c579b73 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 18:05:45 2008 -0600 |
| |
| FSL: Move board/mpc8260ads under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97 |
| Author: goda.yusuke <goda.yusuke@renesas.com> |
| Date: Wed Mar 5 17:08:33 2008 +0900 |
| |
| net: Add support AX88796L ethernet device |
| |
| AX88796L is device of NE2000 compatible. |
| This patch support AX88796L ethernet device. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit e0a6140dd381e1eed1ada2291166ef2616d8822b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 25 22:50:41 2008 +0100 |
| |
| ne2000 driver: change #ifdef to Makefile conditional compilation |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e710185aae90c64d39c2d453e40e58ceefe4f250 |
| Author: goda.yusuke <goda.yusuke@renesas.com> |
| Date: Wed Mar 5 17:08:20 2008 +0900 |
| |
| net: Divided code of NE2000 ethernet driver |
| |
| There are more devices of the NE2000 base. |
| A present code is difficult for us to support more devices. |
| To support more NE2000 clone devices, separated the function. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 395bce4f59a507a60a475f7ee46bed47de9482df |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Feb 24 23:58:13 2008 -0500 |
| |
| net/Blackfin: move on-chip MAC driver into drivers/net/ |
| |
| The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board |
| directory, but it is not board specific, so relocate it to the drivers dir |
| so that other Blackfin ports can utilize it. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Feb 24 23:52:35 2008 -0500 |
| |
| smc91111: use SSYNC() rather than asm(ssync) for Blackfin |
| |
| Since the "ssync" instruction may have hardware anomalies associated with |
| it, have the smc91111 driver use the SSYNC macro rather than invoking it |
| directly. We workaround all the anomalies via this macro. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138 |
| Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> |
| Date: Sun Feb 17 22:57:47 2008 +0000 |
| |
| 8xx: Update OF support on 8xx |
| |
| This patch does some shifting around of OF support on 8xx. |
| |
| Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> |
| |
| commit 9c666a7db0b2285a270c68810889ce7d5dba304b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Feb 15 15:16:18 2008 -0600 |
| |
| ppc: Allow boards to specify how much memory they can map |
| |
| For historical reasons we limited the stack to 256M because some boards |
| could only map that much via BATS. However newer boards are capable of |
| mapping more memory (for example 85xx is capble of doing up to 2G). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb |
| Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> |
| Date: Fri Feb 15 01:05:58 2008 +0000 |
| |
| 8xx : Add OF support to Adder875 board port - resubmit |
| |
| Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> |
| |
| commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Feb 14 20:44:42 2008 -0600 |
| |
| Add setexpr command |
| |
| Add a simple expr style command that will set an env variable as the result |
| of the command. This allows us to do simple math in shell. The following |
| operations are supported: &, |, ^, +, -, *, /. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3f105faa64b9826e088711fdfcaa70cb1230397a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 17:27:48 2008 -0600 |
| |
| FSL: Move board/mpc7448hpc2 under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 449c703374a8868453425e15da7e2f76221b72e4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 17:21:43 2008 -0600 |
| |
| FSL: Move board/mpc8266ads under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5863577989ad689427bb750107e9a75f1c1645d2 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 16:41:41 2008 -0600 |
| |
| FSL: Move board/mpc8260ads under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8a773983957ee6c4aa344469b742f29c7d26afbd |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:08 2008 +0900 |
| |
| [MIPS] Move gth2_config from ARM section to MIPS |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Fix dcache_status() |
| |
| You can't judge UNCACHED by Config.K0 LSB. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Introduce _machine_restart |
| |
| Handles machine specific functions by using weak functions. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit decaba6f5cf386d569ac3997bebb871b966c6b18 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Cleanup CP0 Status initialization |
| |
| Add setup_c0_status from Linux. For the moment we disable interrupts, set |
| CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for |
| reset-time configuration and will work well across most processors. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Initialize CP0 Cause before setting up CP0 Status register |
| |
| Without this change, we'll be suffering from deffered WATCH exception |
| once Status.EXL is cleared. Make sure Cause.WP is cleared. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 26138623230ca2bad3c78e05a65527ea70c8b688 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init() |
| |
| Move things to appropriate place. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:06 2008 +0900 |
| |
| [MIPS] Implement flush_cache() |
| |
| We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you |
| don't need to do Hit_Invalidate_I, but flush_cache() needs it since this |
| function is used not only in U-Boot specfic programs but also at loading |
| target binaries. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:06 2008 +0900 |
| |
| [MIPS] Fix I-/D-cache initialization loops |
| |
| Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I |
| again per a loop for I-cache initialization. But according to 'See MIPS |
| Run', we're encouraged to use three separate loops rather than combining |
| them *for both I- and D-cache*. This patch tries to fix this. |
| |
| In accordance with fixing above, mips_init_[id]cache are separated from |
| mips_cache_reset(), and rewrite cache loops are completely rewritten with |
| useful macros. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 1898840797c7f50799377bd5b285a8a93a82c419 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:06 2008 +0900 |
| |
| [MIPS] Replace memory clearance code with f_fill64 |
| |
| This routine fills memory with zero by 64 bytes, and is 64-bit capable. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2f5d414ccb4024dd0992ff6b22561732dbc73590 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:06 2008 +0900 |
| |
| [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros |
| |
| This patch replaces the current function definitions with NESTED, LEAF |
| and END macro. They specify some more additional information about the |
| function; an alignment of symbol, type of symbol, stack frame usage, etc. |
| These information explicitly tells the assembler and the debugger about |
| the types of code we want to generate. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 282223a607c611425fa33f5428f8eae6636972bb |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 11:43:17 2008 +0900 |
| |
| [MIPS] asm headers' updates |
| |
| Make some asm headers adjusted to the latest Linux kernel. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 11:39:29 2008 +0900 |
| |
| [MIPS] Request for the 'mips_cache_lock()' removal |
| |
| The initial intension of having mips_cache_lock() was to use the cache |
| as memory for temporary stack use so that a C environment can be set up |
| as early as possible. |
| |
| But now mips_cache_lock() follow lowlevel_init(). We've already have the |
| real memory initilaized at this point, therefore we could/should use it. |
| No reason to lock at all. |
| |
| Other problems: |
| |
| Cache locking is not consistent across MIPS implementaions. Some imple- |
| mentations don't support locking at all. The style of locking varies - |
| some support per line locking, others per way, etc. Some parts use bits |
| in status registers instead of cache ops. Current mips_cache_lock() is |
| not necessarily general-purpose. |
| |
| And this is worthy of special mention; once U-Boot/MIPS locks the lines, |
| they are never get unlocked, so the code relies on whatever gets loaded |
| after U-Boot to re-initialize the cache and clear the locks. We're sup- |
| posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented, |
| but leave the situation as it is for a long time. |
| |
| For these reasons, I proposed the removal of mips_cache_lock() from the |
| global start-up code. |
| |
| This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that |
| *things have changed*. If he wants the same behavior as before, he needs |
| to have CFG_INIT_RAM_LOCK_MIPS in his config file. |
| |
| If we don't have any regression report through several releases, then |
| we'll remove codes entirely. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Acked-by: Andrew Dyer <amdyer@gmail.com> |
| |
| commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Mar 24 11:30:54 2008 +0100 |
| |
| lwmon5 SYSMON POST: fix backlight control |
| |
| If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be |
| run on the board, then the SYSMON POST controls the display backlight |
| (doesn't switch backlight ON if POST FAILED, and does switch the |
| backlight ON if PASSED). |
| |
| If not, then the video driver controls the display backlight (just |
| switch ON the backlight upon initialization). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Mar 24 11:29:14 2008 +0100 |
| |
| lwmon5 SYSMON POST: fix handling of negative temperatures |
| |
| Fix errors in the LWMON5 Sysmon POST for negative temperatures. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Mar 7 16:04:25 2008 +0900 |
| |
| pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option |
| |
| In current source code, when the device number of PCI is 0, process PCI |
| bridge without fail. However, when the device number is 0, it is not PCI |
| always bridge. There are times when device of PCI allocates. |
| |
| When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when |
| use this patch. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Fri Mar 21 09:18:40 2008 +0100 |
| |
| LWMON5: fix dsPIC POST |
| |
| Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> --- |
| |
| commit 388b82fddc7c05596f3f615f190da0448227dc82 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:23:13 2008 +0100 |
| |
| [new uImage] Enable new uImage support for the pcs440ep board. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 95f4ec2b9c910c7261e6f060ea530d58b039692d |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:23:13 2008 +0100 |
| |
| [new uImage] Do not compile new uImage format support by default |
| |
| Disable default building of new uImage format support in preparation |
| for merge with the master. Support for new format can be enabled on |
| a per-board basis, by defining the following in the board's config file: |
| |
| #define CONFIG_FIT 1 |
| #define CONFIG_OF_LIBFDT 1 |
| |
| This can be optionally defined to give more verbose output: |
| |
| #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit dafaede8a46c7159310239e036c93e31c6374487 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:20:31 2008 +0100 |
| |
| [new uImage] Disable debuging output in preparation for merge with master |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit fbe7a155027beacebaee9b32e1ada781fe924bca |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 19:38:45 2008 +0100 |
| |
| [new uImage] Compilation and new uImage handling fixes for imxtract |
| |
| Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in |
| include/config_cmd_default.h. Fix few warnings and handling of new format |
| images. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 36cc8cbb3379d5166f882641123521735c469f92 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:10:19 2008 +0100 |
| |
| [new uImage] Fix autoscr command used with new uImage format |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 43142e817f0597be412e7cbe19413f5532eafa5d |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:10:19 2008 +0100 |
| |
| [new uImage] Fix *.its files location in documentation |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 20 22:01:38 2008 +0100 |
| |
| lwmon5 POST: remove unreachable code |
| |
| plus some coding style cleanup |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b73a19e1609d0f705cbab8014ca17aefe89e4c76 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Mar 20 17:56:04 2008 +0300 |
| |
| LWMON5: POST RTC fix |
| |
| Modify the RTC API to provide one a status for the time reported by |
| the rtc_get() function: |
| 0 - a reliable time is guaranteed, |
| < 0 - a reliable time isn't guaranteed (power fault, clock issues, |
| and so on). |
| |
| The RTC chip drivers are responsible for providing this info if the |
| corresponding chip supports such functionality. If not - always |
| report that the time is reliable. |
| |
| The POST RTC test was modified to detect the RTC faults utilizing |
| this new rtc_get() feature. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Mar 19 14:25:14 2008 +0100 |
| |
| TQM5200B: update MTD partition layout |
| |
| - insert partition for dtb blob to TQM5200B MTD layout |
| - set env variables dependent on the configured board |
| (TQM5200 or TQM5200B) |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit f0105727d132f56a21fa3ed8b162309cca6cac44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 07:09:26 2008 +0100 |
| |
| CFI: Small cleanup for FLASH_SHOW_PROGRESS |
| |
| With this patch we don't need that many #ifdef's in the code. It moves |
| the subtraction into the macro and defines a NOP-macro when |
| CONFIG_FLASH_SHOW_PROGRESS is not defined. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9a042e9ca512beaaa2cb450274313fc477141241 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Sat Mar 8 13:48:01 2008 -0500 |
| |
| Flash programming progress countdown. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Mar 19 10:00:06 2008 +0100 |
| |
| [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org> |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Feb 18 18:09:04 2008 +1100 |
| |
| libfdt: Remove no longer used code from fdt_node_offset_by_compatible() |
| |
| Since fdt_node_offset_by_compatible() was converted to the new |
| fdt_next_node() iterator, a chunk of initialization code became |
| redundant, but was not removed by oversight. This patch cleans it up. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit d0ccb9b140b472039732de102fc14597eedb14df |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Feb 18 18:06:31 2008 +1100 |
| |
| libfdt: Trivial cleanup for CHECK_HEADER) |
| |
| Currently the CHECK_HEADER() macro is defined local to fdt_ro.c. |
| However, there are a handful of functions (fdt_move, rw_check_header, |
| fdt_open_into) from other files which could also use it (currently |
| they open-code something more-or-less identical). Therefore, this |
| patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those |
| places. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit fe30a354cdbb808b5f15366a935b151a4ccee74f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 20 14:32:36 2008 -0600 |
| |
| Fix fdt boardsetup command parsing |
| |
| The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 804887e6001e2f00bea11431bf34d6d472512cda |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Feb 15 03:34:36 2008 -0600 |
| |
| Add sub-commands to fdt |
| |
| fdt header - Display header info |
| fdt bootcpu <id> - Set boot cpuid |
| fdt memory <addr> <size> - Add/Update memory node |
| fdt rsvmem print - Show current mem reserves |
| fdt rsvmem add <addr> <size> - Add a mem reserve |
| fdt rsvmem delete <index> - Delete a mem reserves |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Thu Feb 14 16:50:34 2008 +1100 |
| |
| libfdt: Fix NOP handling bug in fdt_add_subnode_namelen() |
| |
| fdt_add_subnode_namelen() has a bug if asked to add a subnode to a |
| node which has NOP tags interspersed with its properties. In this |
| case fdt_add_subnode_namelen() will put the new subnode before the |
| first NOP tag, even if there are properties after it, which will |
| result in an invalid blob. |
| |
| This patch fixes the bug, and adds a testcase for it. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Tue Feb 12 11:58:31 2008 +1100 |
| |
| libfdt: Add and use a node iteration helper function. |
| |
| This patch adds an fdt_next_node() function which can be used to |
| iterate through nodes of the tree while keeping track of depth. This |
| function is used to simplify the iteration code in a lot of other |
| functions, and is also exported for use by library users. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Fri Jan 11 14:55:05 2008 +1100 |
| |
| libfdt: Add fdt_set_name() function |
| |
| This patch adds an fdt_set_name() function to libfdt, mirroring |
| fdt_get_name(). This is a r/w function which alters the name of a |
| given device tree node. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 23e20aa6488e6c0622496549861bfdc74108debe |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Tue Mar 18 13:33:30 2008 +0100 |
| |
| lwmon5: Fix register test logic to match the specific GDC h/w. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 46bc0a938779aa1d664b847d36b08aa00f22e539 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Tue Mar 18 13:27:57 2008 +0100 |
| |
| Fix backlight in the lwmon5 POST. |
| |
| Backlight was switched on even when temperature was too low. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Wed Feb 6 18:48:36 2008 +0100 |
| |
| The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5). |
| |
| To enable this, alternative, configuration the U-Boot board configuration |
| file for lwmon5 includes the definitions of alternative addresses for header |
| (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). |
| |
| The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, |
| and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the |
| lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 0f009f781b5b88f25769e154ea4d42db13baf0c6 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 17:11:53 2008 +0100 |
| |
| Add support for the lwmon5 board reset via GPIO58. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit f694e32f93565ec1fa8d0226c584d6b89e931ed9 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 17:09:55 2008 +0100 |
| |
| Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:11:03 2008 +0100 |
| |
| The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:10:42 2008 +0100 |
| |
| The patch adds new POST tests for the Lwmon5 board. These are: |
| |
| * External Watchdog test; |
| * dsPIC tests; |
| * FPGA test; |
| * GDC test; |
| * Sysmon tests. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit c2ed33efbfff5767bca236828e021c55fd547b6c |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:10:01 2008 +0100 |
| |
| Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| |
| commit 3a5d1e7f1309998791702b2a559e3126781746b9 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Tue Mar 18 13:33:30 2008 +0100 |
| |
| lwmon5: Fix register test logic to match the specific GDC h/w. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 0f855a1f056a8c22116a2103a3900cbfb669df0b |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Tue Mar 18 13:27:57 2008 +0100 |
| |
| Fix backlight in the lwmon5 POST. |
| |
| Backlight was switcehd on even when temperature was too low. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 2d991958b1e420fbfe17b128bd26ade74be5efcc |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Wed Feb 6 18:48:36 2008 +0100 |
| |
| The patch introduces the alternative configuration of the log buffer for |
| the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), |
| the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., |
| PPC440EPX_GPT0_COMP5). |
| |
| To enable this, alternative, configuration the U-Boot board configuration |
| file for lwmon5 includes the definitions of alternative addresses for header |
| (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). |
| |
| The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, |
| and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the |
| lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit ff818b21b069f4bc9cb73373cc5a16014be101b7 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 17:11:53 2008 +0100 |
| |
| Add support for the lwmon5 board reset via GPIO58. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 17:09:55 2008 +0100 |
| |
| Some fixes to dspic, fpga, and gdc post tests for lwmon5. |
| Disable external watch-dog for now. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit e262efe35742c1ad4b0966ff501efc26f34a0aec |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:11:03 2008 +0100 |
| |
| The patch introduces the CRITICAL feature of POST tests. If the test |
| marked as POST_CRITICAL fails then the alternative, post_critical, |
| boot-command is used. If this command is not defined then U-Boot |
| enters into interactive mode. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 65b20dcefc89618193fa51947968dada91e4c778 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:10:42 2008 +0100 |
| |
| The patch adds new POST tests for the Lwmon5 board. |
| These are: |
| |
| * External Watchdog test; |
| * dsPIC tests; |
| * FPGA test; |
| * GDC test; |
| * Sysmon tests. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:10:01 2008 +0100 |
| |
| Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| |
| commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 18 17:35:51 2008 +0100 |
| |
| HMI1001: fix compile problem. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1f2a9970109cebf7446e0503b10b71f8673045ee |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:32:30 2008 -0500 |
| |
| Blackfin: BF537-stamp: drop board-specific flash driver for CFI |
| |
| The parallel flash on the BF537-STAMP is CFI compliant, so there is no need |
| for the board specific driver at all. Just use the common CFI driver. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:36:14 2008 -0500 |
| |
| Blackfin: add proper ELF markings to some assembly functions |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:35:17 2008 -0500 |
| |
| Blackfin: new cplbinfo command for viewing cplb tables |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit aadb72503cd1602349a5fe53356d5f55ecc1b900 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:37:51 2008 -0500 |
| |
| Blackfin: update MAINTAINERS list |
| |
| Add maintainer information for the Blackfin boards. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:26:48 2008 -0500 |
| |
| Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU |
| |
| Stop tying things to the processor that should be tied to other defines and |
| change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build |
| system to select the -mcpu option. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 86a20fb920bd198105acf7b1191117f566d637ed |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Feb 16 07:40:36 2008 -0500 |
| |
| Blackfin: move bootldr command to common code |
| |
| This moves the Blackfin-common bootldr command out of the BF537-STAMP |
| specific board directory and into the common directory so that all Blackfin |
| boards may utilize it. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit decbe029b2a9d3333d02c433389b1c821eea96d7 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Mar 14 11:05:20 2008 +0100 |
| |
| mgcoge: update configuration |
| |
| Fix configuration for mgcoge board |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit c136724cda0219c49f1d4b346f00da29b14fdf14 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 16 01:22:59 2008 +0100 |
| |
| drivers/rtc/Makefile: keep list sorted |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f |
| Author: Tor Krill <tor@excito.com> |
| Date: Sat Mar 15 15:40:26 2008 +0100 |
| |
| Add support for Intersil isl1208 RTC |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| |
| commit 0210cff3d079d97b2156b13685ee8de368e68a1a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Mar 15 17:36:41 2008 +0100 |
| |
| cramfs: Fix ifdef |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 16 01:12:58 2008 +0100 |
| |
| Conding style cleanup |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 41712b4e8c95dff23354bcd620e1f9477160c190 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 5 12:31:53 2008 +0100 |
| |
| ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board |
| |
| This patch adds USB OHCI support to the Canyonlands board port. It also |
| enables EXT2 support. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2596f5b9d353ff3e4387a3325d05740f16958038 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 5 12:29:32 2008 +0100 |
| |
| usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver |
| |
| This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This |
| way a board just needs to define this new option to enable the "force |
| NoPowerSwitching mode" instead of adding new CPU/architecture defines |
| to the USB source itself. |
| |
| This new option will be used first with the new AMCC 460EX Canyonlands |
| board port, which will be posted in a few days. |
| |
| This patch also fixes a small compilation problem when DEBUG is enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 71665ebf88408ff2acb762af47989fd4365b321a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Mar 3 17:27:02 2008 +0100 |
| |
| ppc4xx: Add Canyonlands NAND booting support |
| |
| 460EX doesn't support a fixed bootstrap option to boot from 512 byte page |
| NAND devices. The only bootstrap option for NAND booting is option F for |
| 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap |
| EEPROM needs to be programmed accordingly. |
| |
| This patch adds basic NAND booting support for the AMCC Canyonlands aval |
| board and also adds support to the "bootstrap" command, to enable NAND |
| booting I2C setting. |
| |
| Tested with 512 byte page NAND device (32MByte) on Canyonlands. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 16:53:00 2008 +0100 |
| |
| ppc4xx: Add AMCC Canyonlands support (460EX) (3/3) |
| |
| This patch adds support for the AMCC Canyonlands 460EX evaluation |
| board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6983fe21f774a924d3adb263a270bc2f301f2aa2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 16:52:24 2008 +0100 |
| |
| ppc4xx: Add AMCC Canyonlands support (460EX) (2/3) |
| |
| This patch adds support for the AMCC Canyonlands 460EX evaluation |
| board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 16:51:17 2008 +0100 |
| |
| ppc4xx: Add AMCC Canyonlands support (460EX) (1/3) |
| |
| This patch adds support for the AMCC Canyonlands 460EX evaluation |
| board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:11:43 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (5/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:11:18 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (4/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 999ecd5aca381984d8ebbeb207ece82a1c275577 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:07:10 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (3/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:05:50 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (2/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:05:26 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (1/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 56e410178375d9f20be25fb24e180974f0ae120b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 19 22:07:57 2008 +0100 |
| |
| ppc4xx: interrupt.c reworked |
| |
| This patch is a rework of the 4xx interrupt handling done while |
| adding the 460EX/GT support. Interrupts are needed on 4xx for the |
| EMAC driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 19 22:01:57 2008 +0100 |
| |
| ppc4xx: program_tlb now uses 64bit physical addess |
| |
| This patch changes the physical addess parameter from 32bit to 64bit. |
| This is needed for 36bit 4xx platforms to access areas located |
| beyond the 4GB border, like SoC peripherals (EBC etc.). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c3307fa186af85771924c434997089b8104c0a46 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 19 21:58:25 2008 +0100 |
| |
| ppc4xx: miiphy.c reworked |
| |
| While adding the 460EX/GT support I reworked the 4xx miiphy code. It |
| badly neede some cleanup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 19 16:21:49 2008 +0100 |
| |
| rtc: Add M41T62 support |
| |
| This patch add support for the STM M41T62 RTC. It is used and tested |
| on the AMCC Canyonlands 406EX platform. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 217d383e201adc7f2271145ae345ea5eae2b7170 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:46:43 2008 +0100 |
| |
| ppc4xx: Add 405GPr based MCU25 board specific files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 75a66dcdb383863ad33f0534cfc27b7a86947dad |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:46:42 2008 +0100 |
| |
| ppc4xx: Add 405GPr based MCU25 board config file |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit b05f35436b733a240559e77e46bed8439665ecc5 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:46:41 2008 +0100 |
| |
| ppc4xx: Add 405GPr based MCU25 board. Global files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 14c27b35ac812a71abce6e3e2f4129d5e9313660 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:37:02 2008 +0100 |
| |
| ppc4xx: HCU4/5. remove obsolete hcu_flash.c |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit a079494853cc2bfeddb26673219db0b4b2b31566 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:37:01 2008 +0100 |
| |
| ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY |
| |
| Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with |
| the FLASH_CFI_LEGACY et al. config options. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit e4170e5a50c8110f792bc37472833ae669d69951 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 13:52:25 2008 +0100 |
| |
| ppc4xx: Fix comment in 405EX DDR2 init code |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 766529fccc860ecb9e955b4239dff69cd9e4ea09 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Mar 14 16:22:34 2008 +0100 |
| |
| Add MD5 support to the new uImage format |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 0ede0c383530a418cf98be9122371a86573cd0db |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Mar 14 16:22:34 2008 +0100 |
| |
| Add the MD5 algorithm |
| |
| MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then |
| calculated using the md5() function -- see include/md5.h for details. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Mar 14 16:04:54 2008 +0100 |
| |
| tools/setlocalversion: use a git-describe-ish format |
| |
| Change the automatic local version to have the form -nnnnn-gSHA1SUMID, |
| where 'nnnnn' is the number of commits since the last tag (i.e., |
| 1.3.2-rc3). This makes it much easier to recognize "newer" versions |
| and to see how much has been changed since the referenced tag. |
| |
| Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c6dc21c84de0f159a1752c5ebd33cff843f63609 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 13 14:32:03 2008 +0100 |
| |
| HMI1001: add support for MPC5200 Rev. B processors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 13 14:29:49 2008 +0100 |
| |
| TQM5200: remove dead code |
| |
| This board never used a MGT5100 processor. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 12:14:15 2008 +0100 |
| |
| [new uImage] Fix build issue on ARM |
| |
| ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3310c549a73a949430bfda90876df7552a1dab0c |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 12:13:13 2008 +0100 |
| |
| [new uImage] Add new uImage format documentation and examples |
| |
| Create doc/uImage.FIT documentation directory with the following files: |
| - command_syntax_extensions.txt : extended command syntax description |
| - howto.txt : short usage howto |
| - source_file_format.txt : internal new uImage format description |
| |
| Add example image source files: |
| - kernel.its |
| - kernel_fdt.its |
| - multi.its |
| |
| Update README appropriately. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 1ec73761d2e247078f4520a265d463e8b73391a2 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:35:52 2008 +0100 |
| |
| [new uImage] Fix definition of common bootm_headers_t fields |
| |
| verify, autostart and lmb fields are used regardless of CONFIG_FIT |
| setting, move their definitions to common section. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1d1cb4270edc6a99276834064069717f9782c491 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:35:51 2008 +0100 |
| |
| [new uImage] Fix build problems on trab board |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f773bea8e11f4a11c388dcee956b2444203e6b65 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:35:46 2008 +0100 |
| |
| [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used |
| |
| Save FIT configuration provied in the first bootm argument and use it |
| when to get ramdisk/FDT subimages when second and third (ramdisk/FDT) |
| arguments are not specified. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:01 2008 +0100 |
| |
| [new uImage] More verbose kernel image uncompress error message |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:01 2008 +0100 |
| |
| [new uImage] Use show_boot_progress() for new uImage format |
| |
| This patch allocates a set of show_boot_progress() IDs for new uImage format |
| and adds show_boot_progress() calls in new uImage format handling code. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:01 2008 +0100 |
| |
| [new uImage] Add new uImage fromat support to fpga command |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 09475f7527460e426c0e0628fc5b8f3754fbaa23 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:01 2008 +0100 |
| |
| [new uImage] Add new uImage format handling to other bootm related commands |
| |
| Updated commands: |
| |
| docboot - cmd_doc.c |
| fdcboot - cmd_fdc.c |
| diskboot - cmd_ide.c |
| nboot - cmd_nand.c |
| scsiboot - cmd_scsi.c |
| usbboot - cmd_usb.c |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:00 2008 +0100 |
| |
| [new uImage] Add new uImage format support to imgextract command |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 424c4abdd175d2c470510df8ce0e32d3f463ec16 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:00 2008 +0100 |
| |
| [new uImage] Add new uImage format support to autoscript routine |
| |
| autoscript() routine is updated to accept second argument, which |
| is only used for FIT images and provides a FIT subimage unit name. |
| |
| autoscript() routine callers must now pass two arguments. For |
| non-interactive use (like in cmd_load.c, cmd_net.c), new environment |
| variable 'autoscript_uname' is introduced and used as a FIT |
| subimage unit name source. |
| |
| autoscript command accepts extended syntax of the addr argument: |
| addr:<subimg_uname> |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit cd7c596e9f561dbbc17b717277438aee78cde14f |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:00 2008 +0100 |
| |
| [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines |
| |
| This patch updates architecture specific implementations of |
| do_bootm_linux() adding new uImage format handling for |
| operations like get kernel entry point address, get kernel |
| image data start address. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 3dfe110149311425919e6d6a14b561b4207498f1 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:32:59 2008 +0100 |
| |
| [new uImage] Add node offsets for FIT images listed in struct bootm_headers |
| |
| This patch adds new node offset fields to struct bootm_headers |
| and updates bootm_headers processing code to make use of them. |
| Saved node offsets allow to avoid repeating fit_image_get_node() calls. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit bc8ed486b125452ba3bd8344f052f437329150c5 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:32:53 2008 +0100 |
| |
| [new uImage] ppc: Add new uImage format support to FDT handling routines |
| |
| Support for new (FIT) format uImages is added to powerpc specific |
| boot_get_fdt() routine which now recognizes, sanity checks FIT image |
| and is able to access data sections of the requested component image. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit a44a269a905f924b420020506a4d7d7eedcc0eaf |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:14:57 2008 +0100 |
| |
| [new uImage] Re-enable interrupts for non automatic booting |
| |
| Re-enable interrupts if we return from do_bootm_<os> and 'autostart' |
| environment variable is not set to 'yes'. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d985c8498c4e47095820da97aa722381d39172c5 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:14:38 2008 +0100 |
| |
| [new uImage] Remove unnecessary arguments passed to ramdisk routines |
| |
| boot_get_ramdisk() and image_get_ramdisk() do not need all |
| cmdtp, flag, argc and argv arguments. Simplify routines definition. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit c87796483bc7c2900470dc747c367f602577608d |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:12:37 2008 +0100 |
| |
| [new uImage] Add new uImage format support for ramdisk handling |
| |
| This patch updates boot_get_ramdisk() routine adding format |
| verification and handling for new (FIT) uImages. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:01:05 2008 +0100 |
| |
| [new uImage] Add new uImage format support for kernel booting |
| |
| New format uImages are recognized by the bootm command, |
| validity of specified kernel component image is checked and |
| its data section located and used for further processing |
| (uncompress, load, etc.) |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Mar 11 12:35:20 2008 +0100 |
| |
| [new uImage] Add new uImage format support for imls and iminfo commands |
| |
| imls and iminfo can now recognize nad print out contents of the new (FIT) |
| format uImages. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 9d25438fe7d70cf35a8a293ea5e392fefc672613 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Mar 11 12:34:47 2008 +0100 |
| |
| [new uImage] Add support for new uImage format to mkimage tool |
| |
| Support for the new uImage format (FIT) is added to mkimage tool. |
| Commandline syntax is appropriately extended: |
| |
| mkimage [-D dtc_options] -f fit-image.its fit-image |
| |
| mkimage (together with dtc) takes fit-image.its and referenced therein |
| binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the |
| final image that can be transferred to the target (e.g., via tftp) and then |
| booted using the bootm command in U-Boot. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit eb6175edd6c120d8b89678243e5a2be362ee8e40 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Mar 10 17:53:49 2008 +0100 |
| |
| [new uImage] Make node unit names const in struct bootm_headers |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 21:24:06 2008 +0100 |
| |
| [new uImage] New uImage low-level API |
| |
| Add FDT-based functions for handling new format component images, |
| configurations, node operations, property get/set, etc. |
| |
| fit_ - routines handling global new format uImage operations |
| like get/set top level property, process all nodes, etc. |
| fit_image_ - routines handling component images subnodes |
| fit_conf_ - routines handling configurations node |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 30f1806f60978d707b0cff2d7bf89d141fc24290 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 16:20:02 2008 +0100 |
| |
| Release v1.3.2 |
| |
| Update CHANGELOG for release. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5b464c289ba715d0979b6e1f94947bb8f1068d16 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Mar 9 14:52:11 2008 +0100 |
| |
| SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit db695b78515ddb88a2d4f3357c120345efbf59ec |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Mar 9 10:44:01 2008 +0100 |
| |
| scb9328: Fix flash warning: type qualifiers ignored on function return type |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 10:50:41 2008 +0100 |
| |
| esd/common/fpga.c: fix indentation. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cc3843e36453e2b8db65d7e56de938ba045016a0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 10:33:31 2008 +0100 |
| |
| common/kgdb.c: fix 'dereferencing type-punned pointer' warning |
| |
| and get rid of a couple of unneeded casts. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 10:09:53 2008 +0100 |
| |
| esd/common/fpga.c: fix 'assignment of read-only location' error |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c6fe4dabac066e8758345d249032768496983a3e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 02:13:19 2008 +0100 |
| |
| Makefile: make build silently again. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 76babc86576f092573599334c85ec543fdbc6015 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 02:07:49 2008 +0100 |
| |
| m501sk: Fix out of tree building |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 210ed2004e062fdd03f25ab4925998aa1bd08a07 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 00:06:09 2008 +0100 |
| |
| ADS5121: fix out of tree build |
| |
| and simplify Makefile a bit. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Mar 8 22:35:31 2008 +0100 |
| |
| Release v1.3.2 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 78a90f827df74520e939c794fc7413dace21c4db |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Mar 8 22:35:04 2008 +0100 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Mar 8 21:30:04 2008 +0100 |
| |
| esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d75469d48c05795144f4b8ba76addbb4920a7bba |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sat Mar 8 09:25:49 2008 +0900 |
| |
| net: rtl8169: Add processing when OWNbit did't enable in rtl_recv() |
| |
| When rtl_recv() of rtl8169 is called, OWNbit of status register |
| is not enable occasionally. |
| rtl_recv() doesn't work normally when the driver doesn't do |
| appropriate processing. |
| This patch fix this problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Mar 7 08:15:28 2008 +0100 |
| |
| mgsuvd: update board configuration |
| |
| initialize the UPIOx controller. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit e492c90c26215e459aec0fdf0f8ef1fd204988f5 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Mar 7 08:13:41 2008 +0100 |
| |
| mgcoge: update board configuration |
| |
| add support for the config Flash. |
| initialize the UPIOx controller. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 7 12:27:31 2008 -0600 |
| |
| mpc83xx: make dtb basename file references equal those of linux |
| |
| the dts file basenames were updated in linux - this helps avoid |
| inadvertently loading any old dtbs laying around. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 27 16:08:22 2008 -0600 |
| |
| net: uec_phy: actually increment the timeout counter |
| |
| allow u-boot to recover (and, e.g., switch to another interface) in the |
| case where a PHY does not report autonegotiation is complete within its |
| two second timeout value. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 772003e43957ee0c895abed7cd82cbe72820cbb8 |
| Author: Markus Brunner <super.firetwister@googlemail.com> |
| Date: Wed Mar 5 21:38:12 2008 +0100 |
| |
| fix taihu soft spi_read |
| |
| The taihu board used gpio_read_out_bit which reads the output register and not |
| the pin state. |
| |
| Signed-off-by: Markus Brunner <super.firetwister@gmail.com> |
| |
| commit fc84a8495ac750f6b4adae81f8c4f100f65b6340 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 7 08:01:43 2008 +0100 |
| |
| ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit bd4458cb47abecabd406b1210457be96c69fc49d |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Mar 4 16:59:22 2008 +0800 |
| |
| 837xEMDS: Improve the system performance |
| |
| 1. Make the CSB bus pipeline depth as 4, and enable |
| the repeat mode; |
| 2. Raise the eTSEC emergency priority; |
| 3. Use the highest IP blocks clock. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Thu Mar 6 16:45:53 2008 +0100 |
| |
| Replace "run load; run update" with conditionalized "run load update". |
| |
| The latter version stops when "run load" fails for whatever reasons |
| rendering the combination *a lot* more secure. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 6bc113886d7d316df1a4e459bec8baf027518551 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 4 17:40:41 2008 +0100 |
| |
| net: Print error message upon net usage when no ethernet-interface is found |
| |
| This patch fixes a problem seen on PPC4xx boards, when no MAC address is |
| defined. Then no ethernet interface is available but a simple "tftp" |
| command will return without any error message which is quite confusing. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a30a549a3553032d809e0356306b62de0b125901 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Mar 4 10:03:03 2008 -0600 |
| |
| Remove erroneous or extra spd.h #includers. |
| |
| Many of the spd.h #includers don't need it, |
| and wanted to have spd_sdram() declared instead. |
| Since they didn't get that, some also had open |
| coded extern declarations of it instead or as well. |
| Fix it all up by using spd_sdram.h where needed. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a4475386cef14af3fd88f0518b688e755669486d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 4 17:41:28 2008 +0100 |
| |
| PCS440EP: fix build problems (redundant #define) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 4 17:39:25 2008 +0100 |
| |
| net: Print error message upon net usage when no ethernet-interface is found |
| |
| This patch fixes a problem seen on PPC4xx boards, when no MAC address is |
| defined. Then no ethernet interface is available but a simple "tftp" |
| command will return without any error message which is quite confusing. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 4 17:38:50 2008 +0100 |
| |
| W7OLMC/W7OLMG: fix build problems (redundant #define) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f9301e1cda296245ba052d7b08321199c3d0af9d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 4 14:58:31 2008 +0100 |
| |
| Makefile: fix problem with out-of-tree builds introduced by 5013c09f |
| |
| Commit 5013c09f (Makefile: cleanup "clean" target) introduced a |
| problem for out-of-tree builds which caused "make clean" to fail. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit dfece9500556bed5d8244b1c15d973cec7c25bfe |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 4 11:58:26 2008 +0100 |
| |
| examples/Makefile: build "hello_world" on 8xx, too. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 74eb0222594fd23aafdf168e60e872814eea8b62 |
| Author: Mike Nuss <mike@terascala.com> |
| Date: Mon Mar 3 15:27:05 2008 -0500 |
| |
| PPC4xx (Sequoia): Fix Ethernet "remote fault" problems |
| |
| Every now and then a Sequoia board (or equivalent hardware) had |
| problems connecting to a Gigabit capable network interface. |
| |
| There were differences in the PHY setup between Linux and U-Boot. |
| |
| This patch fixes the problem. Apparently "remote fault" is being set, |
| which signals to some devices (on the other end of the cable) that a |
| fault has occurred, while other devices ignore it. I believe the RF bit |
| was causing the issue, but I removed T4 also, to match up with Linux. |
| |
| Signed-off-by: Mike Nuss <mike@terascala.com> |
| |
| commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Mar 3 09:58:52 2008 -0600 |
| |
| fix QE firmware uploading limit |
| |
| Fix a typo in qe_upload_firmware() that prevented uploading firmware on |
| systems with more than one RISC core. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a |
| Author: Bernhard Nemec <bnemec@ganssloser.com> |
| Date: Mon Mar 3 11:57:23 2008 +0000 |
| |
| Fix endianess problem in cramfs code (cramfs is always host-endian in Linux) |
| |
| Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>, |
| see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846 |
| |
| Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com> |
| |
| commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8 |
| Author: Kim B. Heino <Kim.Heino@bluegiga.com> |
| Date: Mon Mar 3 10:39:13 2008 +0200 |
| |
| fix copy from ram to dataflash |
| |
| If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash |
| routines instead of dataflash. This is because it checks "if source |
| address is not dataflash" instead of target address. |
| |
| Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com> |
| |
| commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Mar 3 12:16:44 2008 +0100 |
| |
| Fix quoting problem (preboot setting) in many board config files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Mar 3 12:36:49 2008 +0100 |
| |
| ADS5121: Fix default environment. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 91c82076ae492bb1f9d9c47a481314631d32dc8e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Mar 2 16:12:31 2008 +0100 |
| |
| Makefile: Fix missing unconfig and mkconfig use |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d |
| Author: michael <trimarchi@gandalf.sssup.it> |
| Date: Sun Mar 2 23:33:46 2008 +0100 |
| |
| Fix checking fat32 cluster size. |
| |
| This fixes the cluster size tests in the FAT32 file system. |
| The current implementation of VFAT support doesn't work if the |
| referred cluster has an offset > 16bit representation, causing |
| "fatload" and "fatls" commands etc. to fail. |
| |
| Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it> |
| |
| commit 661bad63a076a96c39c64f136915f146725af92b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 2 22:57:23 2008 +0100 |
| |
| Prepare v1.3.2-rc2 release candidate |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 76957cb3d621bf664311908e5962e151c633c285 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 1 12:11:40 2008 +0100 |
| |
| ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1 |
| |
| The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But |
| currently 4k/2k is configured. This patch fixes this issue. |
| |
| Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 118978c8eb43803e2794233922df4249fa278b83 |
| Author: Woodruff, Richard <r-woodruff2@ti.com> |
| Date: Fri Feb 29 17:34:35 2008 -0600 |
| |
| Fix alignment error on ARM for modules |
| |
| Fix alignment fault on ARM when running modules. With out an explicit |
| linker file gcc4.2.1 will half word align __bss_start's value. The word |
| dereference will crash hello_world. |
| |
| signed-off-by Richard Woodruff <r-woodruff2@ti.com> |
| |
| commit ce1120dd703e6f12c59e4eba9962356a0300b832 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Feb 29 17:45:31 2008 +0800 |
| |
| fs: Fix ext2 read issue |
| |
| The ext2 aligned process will corrupt the key |
| data struct, the patch fix this. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 2 22:45:33 2008 +0100 |
| |
| Makefile: cleanup "clean" target |
| |
| Make sure CDPATH settings cannot interfere. |
| Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ffda586fc1373243c9794babde69500f6293a8d8 |
| Author: Li Yang <leoli@freescale.com> |
| Date: Fri Feb 29 11:46:05 2008 +0800 |
| |
| add cscope build target |
| |
| Add cscope build target to generate cscope database for code browsing. |
| |
| Signed-off-by: Li Yang <leoli@freescale.com> |
| |
| commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 27 15:06:39 2008 -0600 |
| |
| net: uec_phy: handle 88e1111 rev.B2 erratum 5.6 |
| |
| erratum 5.6 states the autoneg completion bit is functional only if the |
| autoneg bit is asserted. |
| |
| This fixes any secondarily-issued networking commands on non-gigabit |
| links on the mpc8360 mds board. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5f91db7f582ca17b1f19f10189c025696f333d2e |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Tue Feb 26 09:38:14 2008 -0700 |
| |
| MPC5121e ADS PCI support take 3 |
| |
| Adds PCI support for MPC5121 |
| |
| Tested with drivers/net/rtl8139.c |
| |
| Support is conditional since PCI on old silicon does not work. |
| |
| ads5121_PCI_config turns on PCI |
| |
| In this version, condition compilation of PCI code has been moved |
| from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as |
| suggested by Jean-Christophe PLAGNIOL-VILLARD |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit 44b4dbed4133f657705b7c5193209da9978243a7 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Mon Feb 25 23:53:07 2008 +0100 |
| |
| Fix warnings while compilation of post/drivers/memory.c |
| |
| Fix warnings while compilation with new gcc in eldk-4.2 |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 4fae35a53b3e958254d6574a1cc7e10811fc6726 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Mon Feb 25 20:54:04 2008 +0100 |
| |
| ppc4xx: Fix problem in 4xx_enet.c driver |
| |
| U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is |
| enabled. To reproduce the problem ensure that 'ethrotate' |
| environment variable isn't set to "no" and then run |
| "tftp 200000 not_existent_file". |
| This patch tries to fix the issue. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Mon Feb 25 20:04:20 2008 +0100 |
| |
| POST: Disable cache while SPR POST |
| |
| Currently (since commit b2e2142c) u-boot crashes on |
| sequoia board while SPR test if CONFIG_4xx_DCACHE is |
| enabled. This patch disables the cache while SPR test. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Feb 25 17:52:40 2008 +0100 |
| |
| TQM5200: use automatic fdt memory fixup (part 2) |
| |
| Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, |
| TB5200 and TB5200_B to fixup the /memory node with the memory values |
| detected by U-Boot. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 44ceec253ea941b301abf4b079d52324def69d92 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Feb 25 15:17:05 2008 +0100 |
| |
| TQM5200: use automatic fdt memory fixup |
| |
| Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, |
| TB5200 and TB5200_B to fixup the /memory node with the memory values |
| detected by U-Boot. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Feb 25 13:27:52 2008 +0100 |
| |
| TQM5200: fix bug in SDRAM initialization code |
| |
| This patch fixes a bug in the SDRAM initialization code for the |
| TQM5200. The hi_addr bit is now set correctly. Without this patch |
| the hi_addr bit is always set to 1, if the second SDRAM bank is |
| not populated. |
| |
| For other MPC5200 boards a correspondig patch has already been applied |
| some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| -- |
| Forget the first patch please. I confused flash with SDRAM in |
| the comment ... |
| |
| commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Feb 25 00:03:12 2008 +0100 |
| |
| mx1fs2/flash: Fix multiple compiler warnings |
| |
| "pointer targets in assignment differ in signedness" |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Feb 25 00:03:11 2008 +0100 |
| |
| arm-imx: Fix register definitions |
| |
| Sync register definitions with linux |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c9bcf75fecc58886af77d2a571cff2eab39eab6f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Feb 25 00:03:10 2008 +0100 |
| |
| actua1/actua2/actua3: Fix multiple unused variable warnings |
| |
| - actua1: |
| actux1.c: In function 'checkboard': |
| actux1.c:92: warning: unused variable 'revision' |
| |
| - actua2: |
| actux2.c: In function 'checkboard': |
| actux2.c:100: warning: unused variable 's' |
| actux2.c:99: warning: unused variable 'revision' |
| actux2.c: In function 'reset_phy': |
| actux2.c:130: warning: unused variable 'i' |
| |
| - actua3: |
| actux3.c: In function 'checkboard': |
| actux3.c:114: warning: unused variable 'revision' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sun Feb 24 11:44:29 2008 +0900 |
| |
| Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. |
| |
| The previous patch was lacking of i386, microblaze, nios and nios2. This |
| patch tries to fix them. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 22:22:46 2008 +0100 |
| |
| [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt() |
| |
| Do not use global fdt blob pointer, calculate blob size from routine |
| argument blob pointer. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d1cc52879c8966507dad9fb575481e6d3985e64e |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Tue Feb 12 00:58:31 2008 +1100 |
| |
| libfdt: Add and use a node iteration helper function. |
| |
| This patch adds an fdt_next_node() function which can be used to |
| iterate through nodes of the tree while keeping track of depth. This |
| function is used to simplify the iteration code in a lot of other |
| functions, and is also exported for use by library users. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 8cf30809a82902a471866d2f07725ce3b8a22291 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Feb 29 16:00:24 2008 +0100 |
| |
| [new uImage] Add libfdt support to mkimage |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Feb 29 16:00:23 2008 +0100 |
| |
| [new uImage] Add sha1.o object to mkimage binary build |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit df6f1b895c997978f03afe04502ee76b7ba34ab9 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 16:00:06 2008 +0100 |
| |
| [new uImage] Fix component handling for legacy multi component images |
| |
| Use uint32_t when accessing size table in image_multi_count() and |
| image_multi_getimg() for multi component images. |
| |
| Add missing uimage_to_cpu() endianness conversion. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 15:59:59 2008 +0100 |
| |
| [new uImage] Share common uImage code between mkimage and U-boot |
| |
| This patch adds the following common routines: |
| |
| 1) Dedicated mkimage print_header() is replaced with common |
| image_print_contents() |
| image_print_contents_noindent() |
| |
| 2) Common os/arch/type/comp fields name <--> id translation routines |
| genimg_get_os_name() |
| genimg_get_arch_name() |
| genimg_get_type_name() |
| genimg_get_comp_name() |
| genimg_get_os_id() |
| genimg_get_arch_id() |
| genimg_get_type_id() |
| genimg_get_comp_id() |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 14:58:34 2008 +0100 |
| |
| [new uImage] Update naming convention for bootm/uImage related code |
| |
| This patch introduces the following prefix convention for the |
| image format handling and bootm related code: |
| |
| genimg_ - dual format shared code |
| image_ - legacy uImage format specific code |
| fit_ - new uImage format specific code |
| boot_ - booting process related code |
| |
| Related routines are renamed and a few pieces of code are moved around and |
| re-grouped. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:51 2008 -0600 |
| |
| [new uImage] Respect autostart setting in linux bootm |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:50 2008 -0600 |
| |
| [new uImage] Provide ability to restrict region used for boot images |
| |
| Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way |
| to restrict what memory range is used for bootm. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:49 2008 -0600 |
| |
| [new uImage] Use lmb for bootm allocations |
| |
| Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd() |
| functions over to using lmb for allocation of the ramdisk, command line |
| and kernel bd info. |
| |
| Convert PPC specific fdt_relocate() to use lmb for allocation of the device |
| tree. |
| |
| Provided a weak function that board code can call to do additional |
| lmb reserves if needed. |
| |
| Also introduce the concept of bootmap_base to specify the offset in |
| physical memory that the bootmap is located at. This is used for |
| allocations of the cmdline, kernel bd, and device tree as they should |
| be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f5614e7926863bf0225ec860d9b319741a9c4004 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:48 2008 -0600 |
| |
| [new uImage] Add autostart flag to bootm_headers structure |
| |
| The autostart env variable was dropped as part of the initial new uImage |
| cleanup. Add it back here so the arch specific code can decide if it |
| wants to really boot or not. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 4ed6552f715983bfc7d212c1199a1f796f1144ad |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:47 2008 -0600 |
| |
| [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images |
| |
| Introduce the LMB lib used on PPC in the kernel as a clean way to manage |
| the memory spaces used by various boot images and structures. This code |
| will allow us to simplify the code in bootm and its support functions. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Feb 19 22:03:47 2008 -0600 |
| |
| [new uImage] ppc: Allow boards to specify effective amount of memory |
| |
| For historical reasons we limited the stack to 256M because some boards |
| could only map that much via BATS. However newer boards are capable of |
| mapping more memory (for example 85xx is capable of doing up to 2G). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 274cea2bddbca10cdad7daa518951b75c44ef6bc |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:46 2008 -0600 |
| |
| [new uImage] rework error handling so common functions don't reset |
| |
| Changed image_get_ramdisk() to just return NULL on error and have |
| get_ramdisk() propogate that error to the caller. It's left to the |
| caller to call do_reset() if it wants to. |
| |
| Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc |
| to a common location. In the future we will change get_fdt() and |
| fdt_relocate() to return success/failure and not call do_reset() at all. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d2bc095a639672def11d5d043b5688d0dbd692ec |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:45 2008 -0600 |
| |
| [new uImage] ppc: Re-order ramdisk/fdt handling sequence |
| |
| Doing the fdt before the ramdisk allows us to grow the fdt w/o concern |
| however it does mean we have to go in and fixup the initrd info since |
| we don't know where it will be. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 27953493ef025fb698d68c5dee39b36f01f4d530 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:44 2008 -0600 |
| |
| [new uImage] ppc: Determine if we are booting an OF style |
| |
| If we are bootin OF style than we can skip setting up some things |
| that are used for the old boot method. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:43 2008 -0600 |
| |
| [new uImage] Don't pass kdb to ramdisk_high since we may not have one |
| |
| We don't actually need the kdb param as we are just using it to get |
| bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we |
| boot via OF we might not actually fill out a kdb. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 16:30:47 2008 -0600 |
| |
| 85xx: Don't icbi when unlocking the cache |
| |
| There is no reason to icbi when invalidating the temporary stack in |
| the d-cache. Its impossible on e500 to have the i-cache contain |
| any addresses in the temp stack and it can be problematic in generating |
| transactions on the bus to non-valid addresses. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Feb 27 15:50:50 2008 -0600 |
| |
| Fix source for ECM error IVPR |
| |
| The source vector for the ECM was being set to 2, |
| but that's what the source vector for DDR was being |
| set to. Change it to 1. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Feb 27 14:29:58 2008 -0600 |
| |
| Invalidate INIT_RAM TLB mappings |
| |
| Commit 0db37dc... (and some others) changed the INIT_RAM TLB |
| mappings to be unguarded. This collided with an existing "bug" |
| where the mappings for the INIT_RAM were being kept around. |
| This meant that speculative loads to those addresses were |
| succeeding in the TLB, and going out to the bus, where they |
| were causing an exception (there's nothing at that address). The |
| Flash code was coincidentally causing such a speculative load. |
| Rather than go back to mapping the INIT RAM as guarded, we fix |
| it so that the entries for the INIT_RAM are invalidated. Thus |
| the speculative loads will fail in the TLB, and have no effect. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 347b7938d3e561eb215aa386c37fb5acb5a383c6 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 22:56:17 2008 +0100 |
| |
| sbc8548: Fix Revision reading and unused variable 'path' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 495d162374c472f46454453553382ad0735dc725 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 22:56:16 2008 +0100 |
| |
| sbc8548: Fix cfi flash bank declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4efbe9dbb129f857f27856936112c8c02f016be6 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:02:26 2008 +0100 |
| |
| [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled |
| |
| Dual format image code must properly handle all three FDT passing methods: |
| - raw FDT blob passed |
| - FDT blob embedded in the legacy uImage |
| - FDT blob embedded in the new uImage |
| |
| This patch enables proper raw FDT handling when no FIT imaeg support |
| is compiled in. This is a bit tricky as we must dected FIT format even |
| when FIT uImage handling is not enabled as both FIT uImages and raw FDT |
| blobs use tha same low level format (libfdt). |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:02:26 2008 +0100 |
| |
| [new uImage] POWERPC: Add image_get_fdt() routine |
| |
| FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage |
| (3) or embedded in the new uImage. For the (2) case embedding image must be |
| verified before we get FDT from it. This patch factors out legacy image |
| specific verification routine to the separate helper routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1efd43601f90de21ec6c0ebb9880823e822927b1 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:02:07 2008 +0100 |
| |
| [new uImage] Add image_get_kernel() routine |
| |
| Legacy image specific verification is factored out to a separate helper |
| routine to keep get_kernel() generic and simple. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:01:04 2008 +0100 |
| |
| [new uImage] Move image verify flag to bootm_headers structure |
| |
| Do not pass image verification flag directly to related routines. |
| Simplify argument passing and move it to the bootm_header structure which |
| contains curently processed image specific data and is already being passed |
| on the argument list. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 823afe7cefe00dafefc6696c1cc7aa828c394234 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:00:47 2008 +0100 |
| |
| [Makefile] Sort COBJS in lib_<arch> Makefiles |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:00:47 2008 +0100 |
| |
| [new uImage] Optimize gen_get_image() flow control |
| |
| When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing |
| to do, update its control flow to better reflect that simple case. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Feb 4 08:28:17 2008 +0100 |
| |
| [new uImage] POWERPC: Split get_fdt() into get and relocate routines |
| |
| PPC specific FDT blob handling code is divided into two separate routines: |
| |
| get_fdt() - find and verify a FDT blob (either raw or image embedded) |
| fdt_relocate() - move FDT blob to within BOOTMAP if needed |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Feb 25 13:13:37 2008 -0600 |
| |
| 86xx: Fix renamed GUR symbols in sbc8641d board. |
| |
| Back in commit a551cee99ad1d1da20fd23ad265de47448852f56 |
| (86xx: Fix GUR PCI config registers properly), we should have |
| changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL |
| symbols in the sbc8641d board as well. Fix this oversight. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 64cd594e623c39f73964d18787763e4533f791f7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Feb 25 16:50:48 2008 +0100 |
| |
| ppc4xx: Fix acadia_nand build problem |
| |
| Don't include testdram() on NAND-booting target acadia_nand. This saves |
| a few bytes and makes the target build clean again. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 14e099e698d41e8179d05c2b2dbcf704a236f748 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 24 23:03:12 2008 +0000 |
| |
| mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 724902c8464e610642b3a170278b99710325888e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 24 23:03:11 2008 +0000 |
| |
| arm-imx: Fix registers definition |
| |
| Sync registers definition with linux |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4cd288b589ea1178947c6e364453c32b3dede6b7 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 24 23:03:10 2008 +0000 |
| |
| actua1/actua2/actua3: Fix multipleunused variable |
| |
| - actua1: |
| actux1.c: In function 'checkboard': |
| actux1.c:92: warning: unused variable 'revision' |
| |
| - actua2: |
| actux2.c: In function 'checkboard': |
| actux2.c:100: warning: unused variable 's' |
| actux2.c:99: warning: unused variable 'revision' |
| actux2.c: In function 'reset_phy': |
| actux2.c:130: warning: unused variable 'i' |
| |
| - actua3: |
| actux3.c: In function 'checkboard': |
| actux3.c:114: warning: unused variable 'revision' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d5934ad7756f038a393a9cfab76a4fe306d9d930 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Feb 4 08:28:09 2008 +0100 |
| |
| [new uImage] Add dual format uImage support framework |
| |
| This patch adds framework for dual format images. Format detection is added |
| and the bootm controll flow is updated to include cases for new FIT format |
| uImages. |
| |
| When the legacy (image_header based) format is detected appropriate |
| legacy specific handling is invoked. For the new (FIT based) format uImages |
| dual boot framework has a minial support, that will only print out a |
| corresponding debug messages. Implementation of the FIT specific handling will |
| be added in following patches. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit b29661fc1151077776454288051bc9a488351ce8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Feb 24 15:21:36 2008 +0100 |
| |
| Coding style cleanup. Prepare v1.3.2-rc2 release candidate |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 00b48a48424894daa589d166d73277830b1c6ac4 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Feb 23 12:15:56 2008 +0100 |
| |
| ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit b075d74efb70ff68c49a2532f26b56d6703b69c1 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Feb 23 17:24:16 2008 +0900 |
| |
| Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. |
| |
| ---------------------------------------------------------------- |
| Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)] |
| |
| Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on |
| 32bit targets. |
| |
| GCC can be made to warn about usage of long long types with ISO C90 |
| (-ansi), but only with -pedantic. You can write this in a way that even |
| then it doesn't cause warnings, namely by: |
| |
| #ifdef __GNUC__ |
| __extension__ typedef __signed__ long long __s64; |
| __extension__ typedef unsigned long long __u64; |
| #endif |
| |
| The __extension__ keyword in front of this switches off any pedantic |
| warnings for this expression. |
| |
| Signed-off-by: Olaf Hering <olh@suse.de> |
| Cc: <linux-arch@vger.kernel.org> |
| Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
| Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
| ---------------------------------------------------------------- |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 208acd112e6517b21fc30c420396902b103563ac |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Feb 23 17:07:57 2008 +0900 |
| |
| cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate. |
| |
| This will reduce the build time. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Feb 23 17:05:00 2008 +0900 |
| |
| cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate. |
| |
| This will reduce the build time. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit e682ba399a1d76f09d8cc7af1e57066f1d360d91 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Feb 23 16:58:41 2008 +0900 |
| |
| cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate. |
| |
| This reduces the build time by ~10%. Here's the gth2_config example. |
| |
| BEFORE AFTER |
| real 0m31.441s 0m27.833s |
| user 0m24.766s 0m23.045s |
| sys 0m10.425s 0m7.468s |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 02409f8cf54c7cd91981f0dfec135dbf3858090c |
| Author: Marcel Moolenaar <marcelm@juniper.net> |
| Date: Fri Feb 22 10:48:07 2008 -0800 |
| |
| make define2mk.sed work on FreeBSD |
| |
| In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link", |
| the define2mk.sed script was identified as the source of the link |
| failure on FreeBSD. The problem is that sed(1) does not always support |
| the '+' operator. It isn't on FreeBSD. The attach patch implements the |
| equivalent, using the '*' operator instead and should work everywhere. |
| |
| Signed-off-by: Marcel Moolenaar <marcelm@juniper.net> |
| |
| commit e5084af8ded58453cd07ec1af8b0f29f34122bbc |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Feb 22 17:21:32 2008 +0100 |
| |
| Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter. |
| |
| The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove |
| final traces of long-deprecated "ramdisk" kernel parm") makes these |
| changes neccessary. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit d01b847c5cd070895c4ba178c85cd068a95cf7cd |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Thu Feb 21 13:58:16 2008 -0500 |
| |
| LM75 bug fix for negative temperatures |
| |
| When the LM75 temperature sensor measures a temperature below 0 C, the |
| current driver does not perform sign extension, so the result returned is |
| 256 C too high. This patch fixes the problem. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 5a910c224b13e413bda41922379add6d75c32da3 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Feb 21 18:33:45 2008 +0100 |
| |
| IDS8247: update MAINTAINER entry. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 79eac2bfb591f2b028ec1735049dc91e4320de4a |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Feb 21 18:31:15 2008 +0100 |
| |
| Fix device tree for mgsuvd board. |
| |
| Rename the "scc" node in "ethernet" for the mgsuvd board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2e721094a70a52206af2e1bf1208d9a7131f6dad |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Feb 21 14:23:42 2008 +0100 |
| |
| lwmon5: enable hardware watchdog |
| |
| Some boards (e.g. lwmon5) may use rather small watchdog intervals, so |
| causing it to reboot the board if U-Boot does a long busy-wait with |
| udelay(). Thus, for these boards we have to restart WD more |
| frequently. |
| |
| This patch splits the busy-wait udelay() into smaller, predefined, |
| intervals, so that the watchdog timer may be resetted with the |
| configurable (CONFIG_WD_PERIOD) interval. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Feb 21 12:52:29 2008 +0100 |
| |
| ppc4xx: Support for ATI Radeon 9200 card on sequoia |
| |
| Adds configuration option for ATI Radeon 9200 card |
| support to sequoia config file. If CONFIG_VIDEO |
| is enabled, TEXT_BASE should be changed to 0xFFF80000. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Feb 18 08:18:07 2008 -0600 |
| |
| Remove duplicate defines for ARRAY_SIZE |
| |
| A few duplicate of the ARRAY_SIZE macro sneaked in since we put |
| the define in common.h. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Feb 18 08:09:37 2008 -0600 |
| |
| ppc: Allow boards to specify effective amount of memory |
| |
| For historical reasons we limited the stack to 256M because some boards |
| could only map that much via BATS. However newer boards are capable of |
| mapping more memory (for example 85xx is capable of doing up to 2G). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:24:13 2008 -0500 |
| |
| include autoconf.mk before any other .mk files |
| |
| This bumps the autoconf.mk include step above board/cpu/arch/etc... so that |
| those .mk files can have make if statements based on the current config. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 16fe77752eee099b9fb61ed73460e51cc94b37ba |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:10:07 2008 -0500 |
| |
| error check autoconf.mk generation |
| |
| If any of the steps for generating autoconf.mk fail currently, they go |
| unnoticed. To fix, we can simply add 'set -e' to the long list of commands. |
| This is simpler and more robust than placing '|| exit $$?' after every line. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 019895a8dee71a9f00da05c03e379f45d581b0fe |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Mon Feb 18 08:03:51 2008 +0100 |
| |
| Fix bug in dependency checking |
| |
| By adding VERSION_FILE to the PHONY targets the script |
| /tools/setlocalversion is always called and version_autogenerated.h |
| is replaced only if the script find a modified source file. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 98ba144ccc912eee90dd42699f023c497ce774c6 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Feb 18 14:35:43 2008 +0900 |
| |
| Fix GPMC CS2 memory setup at apollon |
| |
| It disables the current map first |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 23:52:46 2008 +0100 |
| |
| uli526x: Fix multiple differ in signedness and parentheses around comparison |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit beeccf7a5dc5415c202e0132a33c58fc316c2a62 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 16:58:04 2008 +0100 |
| |
| MIPS: Fix CFG_NO_FLASH support |
| |
| - Fix flash_init call when CFG_NO_FLASH is used |
| - Remove no more needed flash.c for qemu-mips |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Feb 16 02:40:18 2008 -0500 |
| |
| easylogo: clean up some more and add -r (rgb) support |
| |
| Michael Hennerich added support for outputting an image in RGB format rather |
| than forcing YUYV all the time. This makes obvious sense if the display you |
| have takes RGB input rather than YUYV. |
| |
| Rather than hack in support for options, I've converted it to use getopt and |
| cleaned up the argument parsing in the process. |
| |
| Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit f65c98129ccada3f7caf97d80395a95b84e911de |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Feb 16 02:12:37 2008 -0500 |
| |
| Makefile: add target for $(LDSCRIPT) |
| |
| If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds), |
| then change into the board directory and try and create it. This allows you |
| to generate the linker script on the fly based upon board defines (like the |
| Blackfin boards do). |
| |
| There should be no regressions due to this change as the normal case is to |
| already have a u-boot.lds file. If that's the case, then there's nothing to |
| generate, and so make will always exit. The fix here is that if the linker |
| script does not exist, the implicit rules take over and attempt to guess how |
| to generate the file. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 5583cbf736474ef754e128a54fb78632f57b48fd |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:27:49 2008 +0100 |
| |
| [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2242f5369822bc7780db95c47985bb408ea9157b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:27:41 2008 +0100 |
| |
| [new uImage] Rename and move print_image_hdr() routine |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f50433d670ec2ee9e96abac67cdc6e5e061a810d |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:20:20 2008 +0100 |
| |
| [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines |
| |
| Introducing routines for parsing new uImage format bootm arguments: |
| [<addr>]#<conf> - configuration specification |
| [<addr>]:<subimg> - subimage specification |
| |
| New format images can contain multiple subimages of the same type. For example |
| a single new format image file can contain three kernels, two ramdisks and a |
| couple of FDT blobs. Subimage and configuration specifications are extensions |
| to bootm (and other image-related commands) arguments' syntax that allow to |
| specify which particular subimage should be operated on. |
| |
| Subimage specification is used to denote a particular subimage. Configurations |
| are a bit more complex -- they are used to define a particualr booting setup, |
| for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple, |
| etc. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit fff888a1997ff7de9b29e24050fc4a0fd403ba16 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:20:19 2008 +0100 |
| |
| [new uImage] Add gen_get_image() routine |
| |
| This routine assures that image (whether legacy or FIT) is not |
| in a special dataflash storage. |
| |
| If image address is a dataflash address image is moved to system RAM. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 75d3e8fbd93c14d9929d024c75af2d742c76db70 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:20:18 2008 +0100 |
| |
| [new uImage] Pull in libfdt if CONFIG_FIT is enabled |
| |
| New uImage format (Flattened Image Tree) requires libfdt |
| functionality, print out error message if CONFIG_OF_LIBFDT |
| is not defined. |
| |
| New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT). |
| This commit turns it on by default. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Mon Feb 18 23:16:35 2008 +0100 |
| |
| CFI: Do not use uninitialized cmd_reset |
| |
| Do not use uninitialized cmd_reset; issue both AMD and Intel reset |
| commands instead |
| |
| From a short test, it looks like AMD-style flash roms treat *any* unknown |
| command write as a reset, at least when in CFI Query mode, so issuing the |
| Intel reset command to AMD-style flashs seems safe (from the small sample I |
| have), plus the 3-cycle magic sequence should kick the state machine into |
| the right state even without a reset command. Since the AMD-style flashs |
| require the unlock sequence for real operation, I chose to try the AMD reset |
| command first, so that Intel flashs do no see an invalid command prior to |
| the CFI query. |
| |
| I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix, |
| plus Intel StrataFlash. |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e7a85f26830c9f2e78506421c2d519a2965bc7a1 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Thu Feb 21 11:56:44 2008 +0100 |
| |
| API: Add (c) and licensing notice to the public API header. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Feb 21 11:06:07 2008 +0100 |
| |
| Fix CPU POST test failure |
| |
| The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the |
| ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered |
| by it. The gcc-4.2 with its more aggressive optimization exposes this fact. |
| This patch just saves the CR value before running the test code, so allowing |
| it to do anything it wants with CR. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Acked-by: Yuri Tikhonov <yur@emcraft.com> |
| -- |
| |
| commit d5908b093955415f3d340706378b991f911af671 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Feb 20 15:26:51 2008 -0600 |
| |
| 8610HPCD: Document the flashbank selection switches. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a551cee99ad1d1da20fd23ad265de47448852f56 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Feb 20 14:22:26 2008 -0600 |
| |
| 86xx: Fix GUR PCI config registers properly. |
| |
| Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where |
| I tried to "8610HPCD: Fix typos in two PCI setup registers", I |
| botched it due to not realizing that 8610 and 8641 had different |
| Global Utility Register defintions, one of which was like 85xx, |
| and the other wasn't. Correct this problem by introducing two |
| symbols, one for each 86xx SoC, but neither of which is named |
| anything like 85xx. |
| |
| My bad. Lovely Wednesday with git bisect. You know. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb06eb961bdffc8728b38c242473d802e83ab2b4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Feb 20 12:24:11 2008 -0600 |
| |
| 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default. |
| |
| Without an actual supported video card hooked up, enabling |
| the CONFIG_VIDEO by default just makes it look broken by |
| routing all console output to the video card. Don't. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d264eff4312f230776b913edade7ceb75f1b1e0 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jan 30 15:08:15 2008 -0600 |
| |
| ColdFire: Fix missing code flash size for M5485EVB |
| |
| Signed-off-by: James Mahan <kmahan@freescale.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jan 30 15:04:42 2008 -0600 |
| |
| ColdFire: Fix 5282 and 5271 interrupt mask bit |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Feb 19 12:31:08 2008 -0600 |
| |
| 8610HPCD: Fix typos in two PCI setup registers. |
| |
| The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA |
| were erroneously present as 85xx names and values, leftover from |
| the clone wars. Fix this by removing the 85xx cruft from the |
| 86xx codebase. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Feb 18 14:01:56 2008 -0600 |
| |
| 86xx: Convert sbc8641d to use libfdt. |
| |
| This is the proper fix for a missing closing brace in the function |
| ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com. |
| The ft_cpu_setup() function in mpc8641hpcn.c should have been |
| removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE, |
| but was missed. Only, the sbc8641d was nominally still using it. |
| It all got ripped out, and the funcality that was in ft_board_setup() |
| was refactored to remove the CPU portions into the new file |
| cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now. |
| |
| Based loosely on an original patch from joe.hamman@embeddedspecialties.com |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 04efddc87c50c84f85dad5c331c634a6ce830a83 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 23:35:31 2008 +0100 |
| |
| mpc86xx: Fix unused variable 'config' and 'immap' |
| |
| and remove useless CONFIG_DDR_INTERLEAVE |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 83d1b3876695c4f21faff2b731d9ef83f38ed208 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 23:03:36 2008 +0100 |
| |
| mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit b6f29c84c208a091f95a10cbc9852d729659ba20 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 14:15:31 2008 +0100 |
| |
| s3c24x0: Fix unused variable 'i' in function 'serial_init_dev' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0937b8d869fdb42d6ad4fe312958639bd62c973f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 14:15:32 2008 +0100 |
| |
| pxa: fix assignment from incompatible pointer type |
| |
| fix mmc_bread function prototype |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 64d792063fff90b8118179b092feee09fe5cae13 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 14:15:30 2008 +0100 |
| |
| at91cap9adk: fix implicit declaration of function 'eth_init' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 375c4353db8f900f7ec772e26fab116ec00f7d3a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Feb 17 15:43:44 2008 +0100 |
| |
| Remove files added by mistake, update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b738654d3c84a30f2bfd9a8d7652ff20807c890c |
| Author: Mike Nuss <mike@terascala.com> |
| Date: Wed Feb 6 11:10:11 2008 -0500 |
| |
| PPC440EPx: Optionally enable second I2C bus |
| |
| The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the |
| PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board |
| code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected. |
| |
| Signed-off-by: Mike Nuss <mike@terascala.com> |
| Cc: Stefan Roese <sr@denx.de> |
| |
| commit ef5b4f221c22d05770878513951745f236b5b43f |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Tue Feb 5 10:26:44 2008 +0100 |
| |
| ppc4xx: HCU4/5. Cleanup configs |
| |
| - hcu4.h: Removed define of CONFIG_PPC405GPr |
| - Corrected phy addresses |
| - Fix boot variables |
| - Respect line length of 80 chars |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 74973126d1be63ac75bdc192f46234dca3a7c421 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Tue Feb 5 11:31:28 2008 +0100 |
| |
| ppc4xx: HCU4/5. Cleanups |
| |
| - Fix some coding style violations. |
| - Use in/out_u16/32 where appropriate. |
| - Use register names from ppc405.h. |
| - Fix trace useage for Lauterbach. |
| - Remove obsolete generation HCU2. |
| - Renamed fixed_hcu4_sdram to init_ppc405_sdram. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Tue Feb 5 10:26:41 2008 +0100 |
| |
| ppc4xx: PPC405GPr fix missing register definitions |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 214398d9cb22268d9d4f7563359edca0f78297a2 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Fri Jan 18 21:49:05 2008 -0500 |
| |
| ppc4xx: Beautify configuration files for Sequoia and Korat boards |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 30c6a241e88499f536e86d325759e29ba00ff67f |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Feb 15 20:09:01 2008 +0100 |
| |
| Wipe out assembler warnings while compiling x86 biosemu |
| |
| This patch tries to get rid of some assembler warnings about |
| changed .got2 section type while compiling x86 bios emulator |
| code. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 67a4389e39ad853d65b72e2b7cad15c7e8291147 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Feb 15 00:57:09 2008 +0100 |
| |
| Prepare v1.3.2-rc1 release candidate |
| |
| commit f33e9653c9c09868995d788511d573771c209fe5 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Feb 15 00:13:20 2008 +0100 |
| |
| Fix compile warning on lib_ppc/board.c |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Feb 14 18:22:04 2008 +0100 |
| |
| Add Radeon Mobility 9200 pci device id to the radeon driver |
| |
| This patch extends PCI device id table of the |
| radeon driver so that the driver will also support |
| Radeon Mobility 9200 (M9+) based boards. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 1b8607e1f7143548c6062c28371449ec69588c00 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Feb 14 18:19:50 2008 +0100 |
| |
| Extend ATI Radeon driver to support more video modes |
| |
| Adds ATI Radeon 9200 support for 1280x1024, 1024x768, |
| 800x600, 640x480 at 24, 16 and 8 bpp. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 4124382de029d361162a4b8cecc773eb8f26e2a8 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 10 17:05:20 2008 +0100 |
| |
| xsengine: fix typo and few coding style |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Fri Feb 8 21:25:58 2008 +0100 |
| |
| Fix wrong memory limit calculation in memory-test |
| |
| If the length of the memory address range passed to the "mtest" command is |
| not of the form 2^x - 1, not all address lines are tested. This bug is |
| inherited from the original software at |
| http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix |
| this. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Feb 15 00:11:39 2008 +0100 |
| |
| Coding STyle cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f6921e3dc331293c873ec4d109fd5517a42a90b3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Feb 5 13:30:43 2008 +0900 |
| |
| sh: Fix register address of SH7722 |
| |
| The address of SH7722 is wrong by old document. |
| This patch fixes this problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 17:44:23 2008 -0500 |
| |
| only update version header as needed |
| |
| Constantly rebuilding the version header will force useless relinking, so we |
| simply need to compare the new header with the existing one before updating |
| it. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 208447f8e953f347425eb92c8e28d59e6d911363 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Jan 28 05:56:19 2008 -0500 |
| |
| Do not specify a CROSS_COMPILE default when executing size |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Wed Feb 13 11:19:19 2008 +0100 |
| |
| Fix return value of mtest when CFG_ALT_MEMTEST set |
| |
| Fix a missing return statement from a non-void function. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 9 14:35:26 2008 -0600 |
| |
| 85xx, 86xx: Determine I2C clock frequencies and store in global_data |
| |
| Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. |
| |
| Update the get_clocks() function in 85xx and 86xx to determine the I2C |
| clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Feb 14 23:18:01 2008 +0100 |
| |
| TQM834x: clean up configuration |
| |
| Get board name consistent with Linux and elsewhere; |
| get rid of local network definitions etc. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 38cc09c55b1d7f233789052c6fc462e5377669a9 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Feb 14 08:02:12 2008 +0100 |
| |
| TFTP: fix search of ':' in BootFile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0bc9efada170096c6b273f19165e32936d330d80 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Feb 14 22:46:55 2008 +0100 |
| |
| Coding style cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Feb 14 22:43:22 2008 +0100 |
| |
| PPC: Use r2 instead of r29 as global data pointer |
| |
| R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc |
| will refuse to use load/store multiple insns; instead, it issues a |
| list of simple load/store instructions upon function entry and exit, |
| resulting in bigger code size, which in turn makes the build for a |
| few boards fail. |
| |
| Use r2 instead. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3c234efa693bc59906c2be55c7918ecbb55392ea |
| Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> |
| Date: Wed Jan 30 09:08:49 2008 +0100 |
| |
| ARM: make the machid configurable via the environment |
| |
| If the variable "machid" exists, let do_bootm_linux use that instead |
| of bd->bi_arch_number. |
| |
| Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> |
| |
| commit dd24058407c5add45cc60aec6c757ddc1a17e1b0 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Wed Jan 23 16:34:46 2008 +0200 |
| |
| Use #ifdef CONFIG_FSLDMAFEC |
| |
| MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably) |
| fails |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit 26c7bab81e08dc7bd696c48f753428a829629bd8 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Jan 19 10:25:59 2008 +0900 |
| |
| common/miiphyutil.c: Cleanup MII_DEBUG and debug() |
| |
| Current MII_DEBUG is confusing in two ways. One is useless define-then- |
| undef at the top of the file. The other is there is only one debug() in |
| this file, and that doesn't seem worthwhile to bother having MII_DEBUG. |
| While there are many useful printf()/puts() debug codes, but they are for |
| DEBUG, not for MII_DEBUG. |
| |
| This patch tries to put them all together into MII_DEBUG and debug(). |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 751b9b5189f3274b03c809172631316d6b002c82 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Thu Jan 17 16:43:25 2008 +0900 |
| |
| OneNAND Initial Program Loader (IPL) support |
| |
| This patch enables the OneNAND boot within U-Boot. |
| Before this work, we used another OneNAND IPL called X-Loader based |
| on open source. With this work, we can build the oneboot.bin image |
| without other program. |
| |
| The build sequence is simple. |
| First, it compiles the u-boot.bin |
| Second, it compiles OneNAND IPL |
| Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin |
| The mechanism is similar with NAND boot except it boots from itself. |
| |
| Another thing is that you can only use the OneNAND IPL only to work |
| other bootloader such as RedBoot and so on. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 21f6f9636f0e978397548751347425fbf8d42bb3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jan 16 13:06:59 2008 -0600 |
| |
| Fix CONFIG_MMC usage in fat code |
| |
| A #if statement in fat.c depended on CONFIG_MMC, instead of |
| defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined |
| as "1" rather than just defined. Now it's better. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f57d7d364ce189e39b0a64338d2f8012c074a2bd |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jan 15 12:52:31 2008 +0100 |
| |
| ppc: Refactor cache routines, so there is only one common set. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jan 23 15:55:02 2008 -0600 |
| |
| 86xx: Fix compilation warning in sys_eprom.c |
| |
| sys_eeprom.c:82:9: warning: unknown escape sequence '\/' |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 65230107025733e89e28fd5e5cfd916d4953c28a |
| Author: Haavard Skinnemoen <hskinnemoen at> |
| Date: Fri Feb 22 11:40:50 2008 +0000 |
| |
| Move AT91RM9200DK board support under board/atmel |
| |
| We already have a vendor subdir for Atmel, so we should use it. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com> |
| |
| commit 6d0943a6be99977d6d853d51749e9963d68eb192 |
| Author: Andreas Engel <andreas.engel@ericsson.com> |
| Date: Mon Jan 14 09:06:52 2008 +0000 |
| |
| ARM: cleanup duplicated exception handlingcode |
| |
| Move duplicated exception handling code into lib_arm. |
| |
| Signed-off-by: Andreas Engel <andreas.engel@ericsson.com> |
| |
| commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29 |
| Author: Timo Tuunainen <timo.tuunainen@sysart.fi> |
| Date: Fri Feb 1 10:09:03 2008 +0000 |
| |
| Support for Artila M-501 starter kit |
| |
| Kimmo Leppala / Sysart and |
| Timo Tuunainen / Sysart |
| |
| commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Mon Feb 11 10:50:19 2008 +0000 |
| |
| AT91CAP9 support |
| |
| --------------------------------- |
| |
| read_dataflash() takes a signed char pointer as a parameter. Silence a |
| few warnings dues to incorrect parameter types in env_dataflash.c. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu Feb 7 09:42:57 2008 +0000 |
| |
| AT91CAP9 support : move board files to Atmel vendor directory. |
| |
| AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 7263ef191b87da94768f762c7093bedeb70db98f |
| Author: Stelian Pop <stelian at> |
| Date: Thu Jan 3 21:15:56 2008 +0000 |
| |
| AT91CAP9 support : MACB changes |
| |
| Signed-off-by: Stelian Pop <stelian <at> popies.net> |
| Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com> |
| |
| commit 6afcabf11d7321850f4feaadfee841488ace54c5 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu Feb 7 16:37:54 2008 +0000 |
| |
| AT91CAP9 support : board/ files |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit fefb6c10928caa9e71335cad64dcb65c83fce8ab |
| Author: Stelian Pop <stelian at> |
| Date: Wed Jan 30 21:15:54 2008 +0000 |
| |
| AT91CAP9 support : cpu/ files |
| |
| Signed-off-by: Stelian Pop <stelian <at> popies.net> |
| |
| commit fa506a926cec348805143576c941f8e61b333cc0 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu Jan 31 21:15:53 2008 +0000 |
| |
| AT91CAP9 support : include/ files |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 20b197c6f2799af399a68f96a1aff543a75621b8 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Sun Jan 20 19:49:21 2008 +0000 |
| |
| AT91CAP9 support : build integration |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Sun Jan 20 21:07:00 2008 +0000 |
| |
| Improve DataFlash CS definition. |
| |
| Use a structure instead of the error prone unnamed array to |
| define the possible dataflash banks. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit a6cdd21b56014208706238712a853a9e9a0a2290 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Sat Jan 19 21:09:35 2008 +0000 |
| |
| Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on |
| |
| Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on. |
| |
| cpu/arm926ejs/start.o: In function `cpu_init_crit': |
| .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init' |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri Feb 1 16:50:24 2008 +0000 |
| |
| Fix timer overflow in DaVinci |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri Feb 1 16:49:08 2008 +0000 |
| |
| Update board NetStar |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| |
| commit b7f6193e76651e1fd606e46eb11915b53cb6618b |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Tue Feb 5 10:26:42 2008 +0100 |
| |
| ppc4xx: HCU4/5. Fix make O=../xx |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Tue Jan 22 08:51:59 2008 -0500 |
| |
| ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit fe891ecf4d187e9d11dde869ed4623af52b54451 |
| Author: Hiroshi Ito <ito@mlb.co.jp> |
| Date: Thu Jan 31 18:35:04 2008 +0900 |
| |
| NFS Timeout with large files. |
| |
| Retry to send NFS packet before reaching timeout. |
| |
| Signed-off-by: Hiroshi Ito <ito@mlb.co.jp> |
| |
| commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0 |
| Author: Johannes Stezenbach <js@sig21.net> |
| Date: Tue Jan 29 00:11:25 2008 +0100 |
| |
| Add dependencies to avoid race conditions with parallel make. |
| |
| Signed-off-by: Johannes Stezenbach <js@sig21.net> |
| |
| commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Jan 28 05:46:01 2008 -0500 |
| |
| Mark board_init_[fr] as noreturn |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 161b2af4d7b48fd602ce333c355a4df0337892bb |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Jan 28 05:28:50 2008 -0500 |
| |
| Only use TEXT_BASE if defined by the board |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 1b769881750030f10743808b9d6013e11f559350 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Jan 25 07:54:47 2008 +0100 |
| |
| Fix remaining CONFIG_COMMANDS |
| |
| update comments |
| Fix coding style |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Jan 21 16:46:00 2008 +0100 |
| |
| Add *~ to .gitignore |
| |
| One should never add a backup file ending in with ~ to the git repository. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 00:02:10 2008 -0600 |
| |
| Remove duplicate defines for ARRAY_SIZE |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c77ce474b1c57b13e9d36d9830f147966c143694 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Mon Jan 14 22:08:14 2008 +0100 |
| |
| Fix incorrect address test in AT91F_DataflashSelect(). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 13 15:09:58 2008 -0600 |
| |
| Fix building of fdt_support.c if DEBUG set |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Feb 12 14:53:28 2008 -0600 |
| |
| Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols |
| |
| These replace direct structure references for IMMR sections. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c62776be8dca4097ca03d4f9415f08d4887b45d0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Feb 12 00:45:06 2008 +0100 |
| |
| Get rid of "#undef DEBUG" from board config files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Jan 15 17:09:41 2008 -0600 |
| |
| Remove #undef DEBUG from MPC83xx board header files |
| |
| Remove the "#undef DEBUG" line from all Freescale 83xx board header files. |
| The inclusion of this line makes it impossible to enable debug code in |
| other source files, because "#define DEBUG" typically needs to be defined |
| before any header files are included. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 69018ce2e086e9caf35b914d675b82bc4888f077 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 08:25:45 2008 -0600 |
| |
| QE: Move FDT support into a common file |
| |
| Move the flat device tree setup for QE related devices into |
| a common file shared between 83xx & 85xx platforms that have QE's. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5cf746c303710329f8040d9c62ee354313e3e91f |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:59:09 2008 +0100 |
| |
| [new uImage] Move kernel data find code to get_kernel() routine |
| |
| Verification of the kernel image (in old format) and finding kernel |
| data is moved to a dedicated routine. The routine will also hold |
| support for, to be added, new image format. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 7b325454fd231d4273de3fe373850f777fb086bf |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:58:20 2008 +0100 |
| |
| [new uImage] Cleanup FDT handling in PPC do_boot_linux() |
| |
| Move FDT blob finding and relocation to a dedicated |
| get_fdt() routine. It increases code readability and |
| will make adding support for new uImage format easier. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit b6b0fe6460b7063ac60b9a3531ef210aedb31451 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:58:13 2008 +0100 |
| |
| [new uImage] Cleanup do_botm_linux() boot allocations |
| |
| This patch moves common pre-boot allocation steps shared between PPC |
| and M68K to a helper routines: |
| |
| common: |
| - get_boot_sp_limit() |
| - get_boot_cmline() |
| - get_boot_kbd() |
| |
| platform: |
| - set_clocks_in_mhz() |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:57:17 2008 +0100 |
| |
| [new uImage] Move ramdisk loading to a common routine |
| |
| Ramdisk loading code, including initrd_high variable handling, |
| was duplicated for PPC and M68K platforms. This patch creates |
| common helper routine that is being called from both platform |
| do_bootm_linux() routines. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:55:53 2008 +0100 |
| |
| [new uImage] Removed dead ramdisk code on microblaze architectures |
| |
| Microblaze do_bootm_linux() includes ramdisk processing code but |
| the ramdisk does not get used anywhere later on. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5ad03eb3854c162684222a718b44c0716ea0db03 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:55:39 2008 +0100 |
| |
| [new uImage] Factor out common image_get_ramdisk() routine |
| |
| Architecture specific do_bootm_linux() routines share common |
| ramdisk image processing code. Move this code to a common |
| helper routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:08 2008 +0100 |
| |
| [new uImage] Move FDT error printing to common fdt_error() routine |
| |
| FDT error handling in PPC do_bootm_linux() shares the same message format. |
| This patch moves error message printing to a helper fdt_error() routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 42b73e8ee00d48004791dea64b8093fb974c57e1 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:07 2008 +0100 |
| |
| [new uImage] Factor out common routines for getting os/arch/type/comp names |
| |
| Move numeric-id to name translation for image os/arch/type/comp header |
| fields to a helper routines: image_get_os_name(), image_get_arch_name(), |
| image_get_type_name(), image_get_comp_name(). |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e99c26694a384221d336f6448c06a57479c0baa4 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:07 2008 +0100 |
| |
| [new uImage] Remove standalone applications handling from boootm |
| |
| Standalone applications are supposed to be run using the "go" command. |
| This patch removes standalone images handling from the do_bootm(). |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:07 2008 +0100 |
| |
| [new uImage] Remove OF_FLAT_TREE support from PPC bootm code |
| |
| Support for OF_FLAT_TREE is to be obsoleted in the near future, |
| remove related code from the bootm routines. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 82850f3d32a2661868ec6876bed7a22c55cef718 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:06 2008 +0100 |
| |
| [new uImage] Use image API in SH do_bootm_linux() routine |
| |
| Introduce image handling API for lately added Hitachi SH architecture. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 4a995edec1ac163d9326d143ffe2b47e7543407f |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:06 2008 +0100 |
| |
| [new uImage] Rename architecture specific bootm code files |
| |
| Implementation of the do_bootm_linux() and other bootm helper routines is |
| architecture specific code. As such it resides in lib_<arch> directories |
| in files named <arch>_linux.c |
| |
| This patch renames those files to a more clear and accurate |
| lib_<arch>/bootm.c form. |
| |
| List of the renamed files: |
| lib_arm/armlinux.c -> lib_arm/bootm.c |
| lib_avr32/avr32_linux.c -> lib_avr32/bootm.c |
| lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c |
| lib_i386/i386_linux.c -> lib_i386/bootm.c |
| lib_m68k/m68k_linux.c -> lib_m68k/bootm.c |
| lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c |
| lib_mips/mips_linux.c -> lib_mips/bootm.c |
| lib_nios/nios_linux.c -> lib_nios/bootm.c |
| lib_nios2/nios_linux.c -> lib_nios2/bootm.c |
| lib_ppc/ppc_linux.c -> lib_ppc/bootm.c |
| lib_sh/sh_linux.c -> lib_sh/bootm.c |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 7582438c285bf0cef82909d0f232de64ec567a8a |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:06 2008 +0100 |
| |
| [new uImage] Return error on image move/uncompress overwrites |
| |
| Check for overwrites during image move/uncompress, return with error |
| when the original image gets corrupted. Report clear message to the user |
| and prevent further troubles when pointer to the corrupted images is passed |
| to do_bootm_linux routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f13e7b2e993c61fed1f607962501e051940d6e80 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:12:17 2008 +0100 |
| |
| [new uImage] Cleanup image header pointer use in bootm code |
| |
| - use single image header pointer instead of a set of auxilliary variables. |
| - add multi component image helper routines: get component size/data address |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:17:10 2008 +0100 |
| |
| [new uImage] Cleanup cmd_bootm.c |
| |
| - sort and cleanup headers, declarations, etc. |
| - group related routines |
| - cleanup indentation, white spaces |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit af13cdbc01eaf88880978bfb4f603e012818ba24 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:45 2008 +0100 |
| |
| [new uImage] Add memmove_wd() common routine |
| |
| Move common, watchdog sensible memmove code to a helper memmmove_wd() routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:44 2008 +0100 |
| |
| [new uImage] Fix FDT header verification in PPC do_boot_linux() routine |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 15158971f49255ccef54f0979a942cfd3de2ae52 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:44 2008 +0100 |
| |
| [new uImage] Fix uImage header pointer use in i386 do_bootm_linux() |
| |
| Use image header copy instead of a (possibly corrupted) pointer to |
| a initial image location. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 261dcf4624b25f3c551efcf8634e9194fabba9c3 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:44 2008 +0100 |
| |
| [new uImage] Remove I386 uImage fake_header() routine |
| |
| I386 targets are not using a uImage format, instead fake header |
| is added to ram image before it is further processed by bootm. |
| |
| Remove this fixup and force proper uImage use for I386. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 559316faf7eae0614c91d77f509b57d6c4c091ba |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:44 2008 +0100 |
| |
| [new uImage] Move CHUNKSZ definition to image.h |
| |
| CHUNKSZ defined for PPC and M68K is set to the same value of 64K, |
| move this definition to a common header. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 321359f20823e0b8c5ad38b64d007a6c48cda16e |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:43 2008 +0100 |
| |
| [new uImage] Move gunzip() common code to common/gunzip.c |
| |
| Move gunzip(), zalloc() and zfree() to a separate file. |
| Share zalloc() and zfree() with cramfs uncompress routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d45d5a18b6b36688f2365623f9d550566c664b5b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:43 2008 +0100 |
| |
| [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux() |
| |
| Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more |
| readable in PPC variant of do_bootm_linux() routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:43 2008 +0100 |
| |
| [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c |
| |
| PPC implementation of do_bootm_linux() routine is moved to |
| a dedicated file lib_ppc/ppc_linux.c |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:14:09 2008 +0100 |
| |
| [new uImage] Define a API for image handling operations |
| |
| - Add inline helper macros for basic header processing |
| - Move common non inline code common/image.c |
| - Replace direct header access with the API routines |
| - Rename IH_CPU_* to IH_ARCH_* |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit ed29bc4e8142b46b626f67524207b36e43d9aad6 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:19:58 2008 +0100 |
| |
| Add missing cmd_ximg.o to common/Makefile |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Mon Jan 28 10:15:02 2008 +0100 |
| |
| ADS5121e: DDR2 init/timing update. |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit ac9152830d7fdebace8a260b7737ef2870c21ca0 |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Wed Jan 30 13:36:57 2008 -0700 |
| |
| Device tree updates |
| |
| Changes to match 5121 device tree going mainline in 2.6.25. |
| |
| Change OF_SOC from "soc5121" to plain "soc". |
| Remove unneeded "ref-frequency" fixups. |
| Remove "address" enetaddr fixup. |
| |
| Add bus-frequency fixup for old OF_SOC so old |
| kernels with old device trees will work with new |
| u-boot with 66MHz IPS clock |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit de55d18df3ff2ea614624e74793de7c43520e0e7 |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Wed Jan 30 13:36:56 2008 -0700 |
| |
| Change IPS freq to 66MHz |
| |
| Recommended frequency is 66MHz |
| Change divider from 4 to 3. |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Jan 14 22:38:55 2008 +0100 |
| |
| xsengine: rename board_post_init to board_late_init |
| |
| missing migration from "Cleanup of some init functions" |
| in c837dcb1a316745092567bfe4fb266d0941884ff |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8dafa87476b0d7170e219c2f5e3842c833a91807 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Sat Jan 12 23:35:33 2008 -0500 |
| |
| Add attribute POST_PREREL to ECC memory POST |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 08:25:45 2008 -0600 |
| |
| QE: Move FDT support into a common file |
| |
| Move the flat device tree setup for QE related devices into |
| a common file shared between 83xx & 85xx platforms that have QE's. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d38da537943cd36356b9d3d9d9b60533554b81d8 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Jan 23 17:20:14 2008 +0100 |
| |
| AVR32: Make SDRAM refresh rate configurable |
| |
| The existing code assumes the SDRAM row refresh period should always |
| be 15.6 us. This is not always true, and indeed on the ATNGW100, the |
| refresh rate should really be 7.81 us. |
| |
| Add a refresh_period member to struct sdram_info and initialize it |
| properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will |
| panic() until the refresh_period member is updated properly. |
| |
| Big thanks to Gerhard Berghofer for pointing out this issue. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 61151cccb660cdb06a07fb283de6089913d7bde0 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Apr 19 10:10:11 2007 +0200 |
| |
| ATSTK1000: Fix potential flash programming bug |
| |
| The (now obsolete) atngw100 flash programming code was having problems |
| programming the onboard at49bv642 chip. The atstk1000 flash |
| programming code may have the same bug, so import fix for this problem |
| from the AVR32 Linux BSP. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 22 17:04:13 2007 +0100 |
| |
| ATSTK1004: Fix comment about default load address |
| |
| The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter |
| wouldn't have worked anyway since the board can only access 4MB of |
| SDRAM. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 8269ab53608d8db2aa06969c337ab0b0518211e5 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 22 17:01:24 2007 +0100 |
| |
| ATSTK1002: Use SDRAM + 4MB as default load address |
| |
| Many people run into problems when they compile a big kernel and load |
| the uImage at the default SDRAM + 2MB address as the kernel will |
| overwrite the uImage as it is being unpacked. Increase the default |
| load address so that we can load a 4MB kernel image without any |
| problems. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2bcacc2d841b77f3d2d3910db722003742727e9f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 22 16:51:39 2007 +0100 |
| |
| ATNGW100: Fix default mtest range |
| |
| Let mtest cover the whole SDRAM except the last megabyte, which is |
| where u-boot lives. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9856a6b3104e0bc210b0868dfe691c52bf03c227 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jan 22 15:31:56 2008 +0900 |
| |
| sh: Fix register address of SH7722. |
| |
| The address of SH7722 is wrong by old document. |
| This patch fixes this problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 30942b18b66f35f2ceedab39af10e9eccaa943cc |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| new command for displaying strings at specified memory locations |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b58d8b48e25b0c866d167cc577f118f528cd9e0a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| rewrite/cleanup Blackfin RTC driver |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 94a91e248b71c3ff951fc27cff6909e82ca37d15 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| generate u-boot.ldr for Blackfin targets |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b779f7a59530436040f157f7841db7ab796542df |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| scrub unused symbols |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit cc2977acc3bbbb7850f16645dd1081f95335868d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| move Blackfin cpu object list to respective cpu directories |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| interface to Blackfin on-chip One-Time-Programmable memory |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:56 2008 -0500 |
| |
| add support for memory commands with Blackfin L1 instruction memory |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:56 2008 -0500 |
| |
| use C code rather than inline assembly |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:56 2008 -0500 |
| |
| add Blackfin-specific reginfo command |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 0858b835e7ea501ea084d34cef75932f098342bb |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| add support for Blackfin symbol prefixes to examples |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 8dc48d71a4be753ea9f84956cd33600de35fad04 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| add Blackfin-specific bdinfo command |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__ |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 60fa72d65610c7ef33e1d6db858979d05ff0df58 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| unify the Blackfin board targets |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d4d7730853e5d675f76ec666807da3028c91d592 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| punt Blackfin VDSP headers and import sanitized/auto-generated ones |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| always pull in asm/blackfin.h for Blackfin ports |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| add missing __raw versions of Blackfin read/write io functions |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| add the default Blackfin logo used by Blackfin boards with splash screens |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| add some more Blackfin docs |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 4087bc88cebec75c432a7fe9f6afb545b0919831 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b45264ee85cbd92020640a32e02fb434fd557108 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:53 2008 -0500 |
| |
| add gitignores for Blackfin pieces |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Jan 18 01:14:03 2008 +0100 |
| |
| TFTP: add host ip addr support |
| |
| allow to use a different server as set in serverip |
| add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length |
| if not defined the max length will be at 128 |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e56b4b494cd92def577969f9678395aa22d34c9f |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 9 14:35:26 2008 -0600 |
| |
| 85xx,86xx: Determine I2C clock frequencies and store in global_data |
| |
| Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. |
| |
| Update the get_clocks() function in 85xx and 86xx to determine the I2C |
| clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 27 10:56:54 2007 +0100 |
| |
| OMAP5912: fix FIFO handling in UART driver |
| |
| According to the OMAP5912 Serial Interfaces Reference Guide (see |
| http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the |
| FIFO_EN enable bit in the FIFO Control Register (FCR) can only be |
| changed when the baud clock is not running, i. e. when both DLL and |
| DLH are set to 0. |
| |
| Thus make sure that DLL and DLH are 0 when writing the FCR. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 16158778b5f52f201e95ded2d2d9084b0ed5670d |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 15:10:52 2007 +0100 |
| |
| ARM: S3C24x0 SoC NAND controller support |
| |
| This patch adds NAND support to the S3C24x0 SoC code in u-boot |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:24:40 2007 +0100 |
| |
| ARM: s3c24xx: Multiple serial port support |
| |
| This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit a25f72f1f73a11de68251fb88c89991e202e68fa |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:16:57 2007 +0100 |
| |
| ARM: arm920t: Allow use of 'gd' pointer from IRQ |
| |
| This patch allows us to use the 'gd' pointer (and thus environment |
| and everything else associated with it) from interrupt context on |
| arm920t. |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit be19bd5cd0f454b63298844a0b5377e029b2caad |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:19:38 2007 +0100 |
| |
| ARM: arm920/s3c24xx: IRQ demulitplexer callback |
| |
| This patch adds a IRQ demultiplexer callback to the arm920 cpu core code, |
| plus a stub implementation of it for the S3C2410. |
| |
| The purpose is to allow arm920t implementations such as the s3c24x0 to |
| implement interrupt handlers in u-boot without having to touch core |
| arm920t code. |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda |
| Author: Hebbar <gururajakr@sanyo.co.in> |
| Date: Tue Dec 18 16:03:07 2007 -0800 |
| |
| ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined |
| |
| Add ifdef to bdinfo command to display ethernet information |
| only if CONFIG_CMD_NET is defined for arm modules. |
| |
| Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884 |
| Author: Hebbar <gururajakr@sanyo.co.in> |
| Date: Tue Dec 18 16:00:54 2007 -0800 |
| |
| ARM: add I2C init function call in lib_arm/board.c |
| |
| Adds I2C init func call to init sequence for ARM boards. This is |
| present in ppc,blackfin and other processor init sequence. |
| |
| Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Feb 1 09:38:29 2008 +0100 |
| |
| ppc4xx: Fix ndfc HW ECC byte order |
| |
| The current ndfc HW ECC implementation swaps the first two ECC bytes. |
| But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering, |
| so this swapping in the HW ECC driver is bogus. This patch fixes this |
| problem and now really uses the SMC ECC byte order. |
| |
| Thanks to Sean MacLennan for pointing this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 30 15:35:50 2008 +0100 |
| |
| ppc4xx: Fix GPIO configuration for pcs440ep |
| |
| The SRD0_PFC0 register was not configured correctly to enable the GPIO's |
| 49-63 for GPIO. They have been configured as trace signals. This patch |
| fixes this by clearing the corresponding bit. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 30 14:48:28 2008 +0100 |
| |
| ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Fri Dec 7 00:42:32 2007 +0100 |
| |
| ARM: Board voiceblue update |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| |
| commit 2c5260f711168d5ee91c70ddbb7d897013eefc46 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Thu Dec 6 23:24:57 2007 +0100 |
| |
| ARM: AT91RM9200 based boards config cleanup |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| |
| Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix |
| indentation. |
| |
| commit 481f28b1db5cd21deb55f69399ba240e107af4c7 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Thu Dec 6 22:59:16 2007 +0100 |
| |
| ARM: Fix at91rm9200dk base address |
| |
| Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was |
| renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced |
| with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT. |
| However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to |
| CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact. |
| I'm sending this patch 4th (!) time in hope it produces at least some |
| reaction. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| |
| Fix at91rm9200dk base and environment address. |
| |
| commit c95219fae2a7add7daa2f91aedca65b1698465c7 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Nov 20 10:40:24 2007 +0100 |
| |
| MMC for PXA 27X (resubmit) |
| |
| MMC support for X_Scale PXA is broken and does not work. |
| Mainly, the mmc_init() function cannot recognize current SD/MMC cards. |
| There were already some patches around the world but none of them was |
| merged into the official u-boot tree. |
| |
| This patch makes order fixing this issue. Resubmit after code cleanup. |
| |
| Applied and tested on PXA 270 (TrizepsIV module). |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Nov 20 10:37:04 2007 +0100 |
| |
| Fix gcc issues in pxa-regs.h |
| |
| Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4 |
| issues generates wrong code. |
| (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu). |
| This patch fixes the problem and solves the gcc-4 issues as the linux |
| kernel does. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com> |
| |
| commit 7047b388876e7b905b2ec4edb8010543e3641b85 |
| Author: Jens Gehrlein <sew_s@tqs.de> |
| Date: Tue Jan 29 08:45:03 2008 +0100 |
| |
| TQM834x: enable DHCP |
| |
| Signed-off-by: Jens Gehrlein <sew_s@tqs.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec |
| Author: Jens Gehrlein <sew_s@tqs.de> |
| Date: Tue Jan 29 08:45:02 2008 +0100 |
| |
| TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit). |
| |
| Signed-off-by: Jens Gehrlein <sew_s@tqs.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8931ab176025b03cfc320b3fd1eca432a88ed560 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sat Jan 26 23:41:19 2008 -0500 |
| |
| Fix conditional compilation of mpx8xxx_spi driver |
| |
| This driver should only compile if CONFIG_MPC8XXX_SPI is set |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 63f732d3d3880feb531f48af247c025bf01462b0 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jan 29 17:00:34 2008 +0100 |
| |
| API: Provide dummy halt() in the glue layer. |
| |
| This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jan 29 16:57:38 2008 +0100 |
| |
| API: Convert conditional building to the new scheme. |
| |
| This fixes a build breakage with CONFIG_API enabled, which appeared after |
| the recent changes in the U-Boot build system. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 98b742489c09780be6a832eeaa4e5eff824792bb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jan 25 09:56:17 2008 +0100 |
| |
| inka4x0: remove dead code |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:06 2008 -0600 |
| |
| 86xx: Add reginfo command |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit ddcebcb638715a6278da93b553d5016f99823816 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:05 2008 -0600 |
| |
| 86xx: Add print_laws function to fsl_law.c |
| |
| This can be used for debug, and will be used by board code |
| to help implement reginfo. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:04 2008 -0600 |
| |
| 86xx: Remove old-style law setup code |
| |
| This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 713d8186649dae874613d495b0cecaa039a98b30 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:03 2008 -0600 |
| |
| 86xx: Convert sbc8641d to use new law setup code. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 031976f6364b93833e989f57e9f1e023e0be8c4c |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:02 2008 -0600 |
| |
| 86xx: Convert mpc8610hpcd to new law setup method. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 4933b91f8a49e436681f163df3173beb91cac44a |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:01 2008 -0600 |
| |
| 86xx: Support new law setup method and convert mpc8641 |
| |
| Adds the support code in cpu/mpc86xx for the new law setup code |
| recently created fsl_law.c, and changes the MPC8641HPCN config |
| to use this code. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:00 2008 -0600 |
| |
| 86xx: Rearrange the sequence in start.S |
| |
| * split the BAT initialization so that only 2 BATs (for the boot page |
| and stack) are programmed very early on. The rest are initialized later. |
| * Move other BAT setup, ccsrbar setup, and law setup later in the code |
| after translation has been enabled. |
| |
| These changes will facilitate the moving of law and BAT initialization |
| to C code, and will aid with 36-bit physical addressing support. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 23 14:41:37 2008 +0100 |
| |
| Coding Style Cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 23 14:31:17 2008 +0100 |
| |
| Coding Style Cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 18 10:07:04 2008 +0800 |
| |
| mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h |
| |
| The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb |
| cause the 83xx immap broken, so the DMA and PCI will |
| be failed. |
| |
| The patch fix the struct spi8xxx and rm struct spi83xx. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6b4439444286e0fcd01596df504e6ca897ad3e5a |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Apr 14 17:11:49 2007 +0200 |
| |
| AVR32: ATNGW100 board support |
| |
| Add support for the ATNGW100 Network Gateway reference design, |
| including flash, ethernet and MMC support. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit e006927a0b9a54e8ee7685d8ac748aaad6801862 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 24 18:15:31 2007 +0100 |
| |
| AVR32: Initialize ipaddr, loadaddr and bootfile at startup |
| |
| I don't know why the relevant layers can't do this by itself, but this |
| is what ppc does. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 799891ef7b1b3432032ec23466df6b665a797fa4 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Fri Jan 18 00:04:28 2008 +0100 |
| |
| Add AcTux board support |
| |
| Hi, |
| |
| The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the |
| files that |
| contain changes for multiple boards, the board-specific files follow as |
| separate patches. |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit 66a4344a4d910a11125df7768899ad529719855e |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Wed Jan 16 19:53:23 2008 +0100 |
| |
| add AcTux-4 board support |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit bc24345e4101a5c996d6b48ce497b09c53025dc6 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Wed Jan 16 19:51:55 2008 +0100 |
| |
| add AcTux-3 board support |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit aebf00fc4d1343b24715373893f7b20bf462d1e9 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Wed Jan 16 19:51:14 2008 +0100 |
| |
| add AcTux-2 board support |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit ea99e8f05b7240fd657739e286664664ae160abe |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Wed Jan 16 19:50:37 2008 +0100 |
| |
| add AcTux-1 board support |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Jan 14 19:20:08 2008 +0100 |
| |
| ARM: remove useless function board_post_init |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 96bd462942022e4569b582c072a0ed26de1cd19b |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Thu Jan 10 14:59:46 2008 +0100 |
| |
| IXP: enable RTS |
| |
| enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE. |
| No handshaking is done, but the active RTS signal allows to |
| connect to the target using a PC which is using RTS/CTS |
| handshake, and does no harm if the PC is set to ignore RTS. |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Jan 7 08:41:34 2008 +0100 |
| |
| IXP: add dynamic microcode addr |
| |
| allow to load the microde from flash or ram by download it through |
| the serial or other. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Sat Nov 10 15:44:12 2007 +0100 |
| |
| load ixp42x NPE firmware from separate flash block, remove dead code |
| |
| Hi, |
| |
| the following patch adds support to move the IXP42X NPE firmware to a |
| separate flash block, whose start address is defined in |
| CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build |
| NPE-enabled u-boot without copyright problems due to the NPE firmware. |
| |
| I hope the patch applies, I get whitespace-related differences in the NPE |
| files due to trailing whitespace in the original versions. |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 57a127201eb3d8cc19170a008e0bd7af608bd72f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 14:15:46 2008 -0600 |
| |
| ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 1aee111135d8660a164d4f6bf7d66b032ea535cf |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 14:02:49 2008 -0600 |
| |
| ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 777d1abd9796f1c2e148417cc10657e847d318ce |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 14:00:25 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x FEC driver |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 72f56adc0b25d43875ad067bae6be1bcea86b79f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:54:09 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x dma code and header files |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:52:03 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x dma code - 2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:48:52 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x dma code - 1 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:39:44 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x related header files |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:37:34 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x cpu arch |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit e2756f4b54aba0e0523b81dd145666829cf7fd59 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:47:23 2008 -0600 |
| |
| ColdFire: Add MCF5227x cpu and M52277EVB support-3 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit c87581027994c148131b2f11aa75501f782ec19a |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:46:19 2008 -0600 |
| |
| ColdFire: Add MCF5227x cpu and MCF52277EVB support-2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 1552af70ecab11b9f3dceff7528ed15faf678b9d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:43:33 2008 -0600 |
| |
| ColdFire: Add MCF5227x cpu and M52277EVB support-1 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 397b7b81a1f1008798ae1206913508cc89cb3a7d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:35:44 2008 -0600 |
| |
| ColdFire: Fix CFI Flash low level Read/Write macro |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit aa5f1f9dc815a76f6dffb580798599c028fe7feb |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:23:08 2008 -0600 |
| |
| ColdFire: Add M5373EVB platform support - 2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 1ac559d4aa358f63b48c62b564224c06feeb4e36 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:19:54 2008 -0600 |
| |
| ColdFire: Add M5373EVB platform support - 1 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 320d61991fa3190ee41765601ed017b6b5ff7b2b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:17:03 2008 -0600 |
| |
| ColdFire: Update FlexBus CS for MCF532x |
| |
| Definition update and change from 16bit to 32bit |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 2e72ad0644b940817a89a3590ce0d7b99c05c396 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:11:47 2008 -0600 |
| |
| ColdFire: PCI and misc updates for MCF5445x |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:06:55 2008 -0600 |
| |
| ColdFire: MCF5445x header files cleanup |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit d9aae6260993a93f7fcf13abff85a601f4f50ea7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 16:59:42 2008 -0600 |
| |
| ColdFire: MCF532x header files cleanup |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 7af7751d047e74b2ec58400f97b879c56446b3e8 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 15:30:15 2008 -0600 |
| |
| ColdFire: Add modules header files |
| |
| Add CF specific modules header files |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Jan 17 12:48:00 2008 -0600 |
| |
| codingstyle cleanup for spi driver |
| |
| ..and rm unused CONFIG_FSL_SPI define |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit d59feffb42c9f174116db7a82a311df98983dfce |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Jan 16 17:12:12 2008 -0500 |
| |
| FSL: Fix common EEPROM_data structure definition |
| |
| - Fix EEPROM_data structure definition according to System EEPROM Data Format. |
| - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to |
| bd->bi_ethaddr. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 6bee764bd6da510a4aad614880300c968bc7318d |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 16 15:48:12 2008 -0600 |
| |
| 86xx: enable command-line editing |
| |
| Enable command-line editing for all MPC86xx boards. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 80ddd22626d321a772ebfba304eb7830cb4f6bac |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Jan 16 22:37:42 2008 -0500 |
| |
| Implement hard SPI driver on MPC8349EMDS |
| |
| This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board. |
| This board has an ST M25P40 4Mbit EEPROM on its SPI bus |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Jan 16 22:37:35 2008 -0500 |
| |
| Add support for a Freescale non-CPM SPI controller |
| |
| This patch adds support for the SPI controller found on Freescale PowerPC |
| processors such as the MCP834x family. Additionally, a new config option, |
| CONFIG_HARD_SPI, is added for general purpose SPI controller use. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a8cb43a89be6cfd283257a603dd9841503ccce0f |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 17 18:23:19 2008 +0800 |
| |
| mpc83xx: Fix the fatal conflict of merge |
| |
| The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7 |
| will cause the mpc8315erdb board can't boot up. |
| |
| The patch fix that bug, and remove the duplicated #ifdef |
| CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for |
| MPC8313E processor. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3259eeaa4148125a81417477f62c05bd67f60587 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Thu Jan 17 08:50:09 2008 -0500 |
| |
| Merge Sequoia beautification into Korat code |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit e16925773211291b562e77187061e9dd1d757217 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Jan 17 07:45:05 2008 +0100 |
| |
| net: add 'ethrotate' environment variable |
| |
| [PATCH] net: add 'ethrotate' environment variable |
| |
| This patch replaces the buildtime configuration option |
| CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime |
| configuration veriable. See README. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 17 14:29:04 2008 +0100 |
| |
| ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5 |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Jan 17 18:07:32 2008 +0900 |
| |
| sh: Remove CONFIG_COMMANDS from MS7720SE config file |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 055606bd25e88c0cd04ad348a679a04b1b616bee |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Jan 16 18:39:20 2008 +0100 |
| |
| ppc4xx: Netstal HCU4 board: added various fixes and POST |
| |
| - Moved some common code to netstal/common/nm_bsp.c. |
| - sdram initialisation goes go netstal/common/fixed_sdram.c. |
| - Added support for POST. |
| - Stylistic cleanups (multi-line comments/ enforce 80 colomn width) |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 69b0634a4ee98c9791815600d43b99f626a952f3 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Thu Jan 17 12:53:56 2008 +0100 |
| |
| ppc4xx: netstal/common define routines used by all boards |
| |
| Added some routines used by all Netstal boards: |
| - nm_bsp.c: - nm_show_print and |
| - common_misc_init_r |
| - set_params_for_sw_install. Very specific code to handle our SW |
| installation procedure |
| - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards |
| to handle sdram initialization. |
| - nm.h: Common header |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Jan 16 18:39:18 2008 +0100 |
| |
| ppc4xx: Netstal HCU5 board: added various fixes and POST |
| |
| - Moved some common code to nestal/common/nm_bsp.c. |
| - Added support for the vxWorks EDR. |
| - Enable trace for Lauterbach, if present. |
| - Added support for POST. |
| - Stylistic cleanups (multi-line comments/ enforce 80 colomn width) |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 4371090e5da77edc7bf9f296364db4801639d9c4 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Jan 16 18:39:08 2008 +0100 |
| |
| ppc4xx: Netstal HCU5 board. Added POST. Various fixes |
| |
| - Various fixes |
| - Reduced rom_size from 384 to 320 kB |
| - Environment is now in flash |
| - Added POST |
| - Support for OF |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Jan 16 18:37:50 2008 +0100 |
| |
| ppc4xx: Netstal HCU4 board. Added POST. Various fixes |
| |
| - Various fixes |
| - Reduced rom_size from 384 to 320 kB |
| - Environment is now in flash |
| - Added POST |
| - Support for OF |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 1a3ac86b79fcb690275c85861c8efa6a3899060a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Jan 17 10:53:08 2008 +0100 |
| |
| ppc4xx: Complete DU440 board support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Jan 17 10:52:30 2008 +0100 |
| |
| ppc4xx: Add DU440 board support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ac331da07db3860f11fa1d0fd3db7c810bce1198 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Jan 17 15:53:52 2008 +0900 |
| |
| sh: Update SuperH SCIF driver |
| |
| This patch fixed wrong SH7720 CPU macro and changed macro that |
| calculated value of SCBRR register. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 334e442e6fac59be91244063e9b3f6ca25e8daf8 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Wed Jan 16 15:12:47 2008 +0100 |
| |
| Set ips dividor to 1/4 of csb clock. |
| |
| Previous setting cause ips clock to be out of spec. This bug was found by John |
| Rigby from Freescale. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 02:19:18 2008 -0600 |
| |
| 85xx: Get ride of old TLB setup code |
| |
| Now that all boards have been converted, remove old config code and the |
| config option for the new style. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3b558e26a5ef31635787d6d6e97d70939d4f892d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 02:02:10 2008 -0600 |
| |
| 85xx: Convert TQM85xx to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 74121b470c14f7eaf284ee838bffca6f9521069e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:56:32 2008 -0600 |
| |
| 85xx: Convert STXGP3 & STXSSA to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:44:34 2008 -0600 |
| |
| 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 818218bac6a11591e2542c344d2330e0f4e1968b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:31:34 2008 -0600 |
| |
| 85xx: Convert PM854/PM856 to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:25:33 2008 -0600 |
| |
| 85xx: Convert MPC8540EVAL to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 73aa9ac2b46f1cfd039106ebd6b9865016005234 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:12:22 2008 -0600 |
| |
| 85xx: Convert MPC8568 MDS to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0db37dc2eed30884db2daa24dbd9a113b5d00610 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:01:09 2008 -0600 |
| |
| 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 00:52:29 2008 -0600 |
| |
| 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 00:32:17 2008 -0600 |
| |
| 85xx: Convert ATUM8548 to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 23:11:57 2008 -0600 |
| |
| 85xx: Convert MPC8544 DS to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 22:38:34 2008 -0600 |
| |
| 85xx: Reworked initial processor init |
| |
| Reworked the initial processor initialzation sequence: |
| * introduced cpu_early_init_f that is run in address space 1 (AS=1) |
| * Moved TLB/LAW and CCSR init into cpu_early_init_f() |
| * Reworked initial asm code to do most of the core init before TLBs |
| |
| The main reasons for these changes are to allow handling of 36-bit phys |
| addresses in the future and some of the issues that will exist when we |
| do that. |
| |
| There are a few caveats on what can be initialized via the LAW and TLB |
| static tables: |
| * TLB entry 14/15 can't be initialized via the TLB table |
| * any LAW that covers the implicit boot window (4G-8M to 4G) must map to |
| the code that is currently executing. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 44a23cfd6360a68eaa41f945190618a55519eac3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 22:33:22 2008 -0600 |
| |
| 85xx: Introduce new tlb API |
| |
| Add a set of functions to manipulate TLB entries: |
| * set_tlb() - write a tlb entry |
| * invalidate_tlb() - invalidate a tlb array |
| * disable_tlb() - disable a variable size tlb entry |
| * init_tlbs() - setup initial tlbs based on static table |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit be88b1699863c262818f3af7f60173b4d48df8fc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 17 07:50:17 2008 +0100 |
| |
| ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c8c41d4a80b1a8ad5984a287d81ea780496259f8 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 10:04:42 2008 -0600 |
| |
| 85xx: Use proper defines for PCI addresses |
| |
| We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE. |
| While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only |
| be used for configuring the PCI ATMU. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 54a5070115eff38e9b324b78abdfa0b4520580b9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:22:29 2008 -0600 |
| |
| 85xx: Remove old style of LAW init |
| |
| All boards are now using the new fsl_law code so we can drop the old version. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:15:29 2008 -0600 |
| |
| 85xx: convert remaining 85xx boards over to use new LAW init code |
| |
| Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over |
| to use new LAW init code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 572b13afc42710f2957c382a710360429c0e099b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:11:53 2008 -0600 |
| |
| 85xx: convert STXGP3/STXSSA over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 45f2166ac0233a9263058378f39612bd11f61196 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:06:48 2008 -0600 |
| |
| 85xx: convert PM854/PM856 over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:05:27 2008 -0600 |
| |
| 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 01:45:10 2008 -0600 |
| |
| 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 01:32:06 2008 -0600 |
| |
| 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 01:16:16 2008 -0600 |
| |
| 85xx: convert MPC8544 DS over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 83d40dfd79fe868796275802f60116d84b9e4395 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 01:13:58 2008 -0600 |
| |
| 85xx: Move LAW init code into C |
| |
| Move the initialization of the LAWs into C code and provide an API |
| to allow modification of LAWs after init. |
| |
| Board code is responsible to provide a law_table and num_law_entries. |
| |
| We should be able to use the same code on 86xx as well. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit bed8ce838a609aaab136d43b25e6df2a520bc854 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 22 15:03:12 2007 +0100 |
| |
| qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0764c164fed6277d359cf132d55187ea34290114 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Wed Jan 16 19:27:51 2008 +0200 |
| |
| MIPS:Target support for qemu -M mips |
| |
| With serial, NE2000, IDE support. Tested in big-endian mode. |
| Memory size hard-coded to 128M for now, so don't play with |
| the -m option. |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Jan 11 00:01:37 2008 +0100 |
| |
| Fix nfs command help to reflect that the serverip is optional |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Dec 10 22:32:14 2007 +0100 |
| |
| bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr |
| |
| and move is_valid_ether_addr board file |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit c2f896b8fc4722e36915903e1942e138e68ce804 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Wed Jan 16 16:13:31 2008 +0900 |
| |
| drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status). |
| |
| rx_status on the memory is basically in LE, but needs to be handled in CPU |
| endian. le32_to_cpu() takes up this mission. Even if on the sane hardware, |
| it'll work fine. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Masami Komiya <mkomiya@sonare.it> |
| Cc: Lucas Jin <lucasjin@gmail.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 96a236746fe6a7b84802afb4ed31536696d34812 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Wed Jan 16 16:12:26 2008 +0900 |
| |
| drivers/net/rtl8139.c: Fix cache coherency issues |
| |
| Current driver is meant for cache coherent systems. This patch adds |
| flush_cache() routines to support cache non-coherent systems. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Masami Komiya <mkomiya@sonare.it> |
| Cc: Lucas Jin <lucasjin@gmail.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d1276c76c1e2b5035296689280ba1acb2c425104 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Wed Jan 16 16:11:14 2008 +0900 |
| |
| drivers/net/rtl8139.c: Fix tx timeout |
| |
| "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it |
| does, the condition "(currticks() < to)" becomes invalid and immediately |
| leads to tx timeout error. This patch introduces the fine-graded udely(10) |
| loops to ease the impact of wrapping around. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Masami Komiya <mkomiya@sonare.it> |
| Cc: Lucas Jin <lucasjin@gmail.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 11 18:45:28 2008 +0800 |
| |
| TSEC: Add the support for RealTek RTL8211B PHY |
| |
| Add the support of RealTek RTL8211B PHY, the RTL8211B |
| PHY only supports RGMII and MII mode. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 84a3047b72b70e862b0b7a8e2058077457f89a32 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Wed Jan 16 09:40:41 2008 +0100 |
| |
| Remove annoying debug printout for PHY less boards. |
| |
| PHY less board prints out lots of "read wrong ...": |
| read wrong value : mii_id 3,mii_reg 2, base e0102320 |
| read wrong value : mii_id 3,mii_reg 3, base e0102320 |
| UEC: PHY is Generic MII (ffffffff) |
| read wrong value : mii_id 3,mii_reg 4, base e0102320 |
| read wrong value : mii_id 3,mii_reg 0, base e0102320 |
| read wrong value : mii_id 3,mii_reg 1, base e0102320 |
| read wrong value : mii_id 3,mii_reg 1, base e0102320 |
| read wrong value : mii_id 3,mii_reg 5, base e0102320 |
| read wrong value : mii_id 3,mii_reg 1, base e0102320 |
| read wrong value : mii_id 3,mii_reg 1, base e0102320 |
| read wrong value : mii_id 3,mii_reg 5, base e0102320 |
| FSL UEC0: Full Duplex |
| FSL UEC0: Speed 100BT |
| FSL UEC0: Link is up |
| Using FSL UEC0 device |
| |
| Make this printout depend on UEC_VERBOSE_DEBUG and |
| remove its definition in uec_phy.c |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 15 14:11:00 2008 -0600 |
| |
| net: reduce boot latency on QE UEC based boards |
| |
| actually polling for PHY autonegotiation to finish enables us to remove the |
| 5 second boot prompt latency present on QE based boards. |
| |
| call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from |
| uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait |
| code shamelessly stolen from tsec driver. |
| |
| also rm unused CONFIG_RMII_MODE code. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3 |
| Author: michael.firth@bt.com <michael.firth@bt.com> |
| Date: Wed Jan 16 11:40:51 2008 +0000 |
| |
| TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus |
| |
| The current TSEC driver limits MDIO access to the devices that have been configured as attached |
| to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands. |
| |
| Signed-off-by: Michael Firth <michael.firth@bt.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 16 00:38:05 2008 -0600 |
| |
| Add support for the MPC837xERDB |
| |
| MPC837xERDB board support includes: |
| * DDR2 330MHz hardcoded (soldered on the board) |
| * Local Bus NOR Flash |
| * I2C, UART and RTC |
| * eTSEC RGMII (TSEC0 - RTL8211B with MII; |
| * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware |
| * load) |
| |
| Signed-off-by: Kevin Lam <kevin.lam@freescale.com> |
| Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 16 12:06:16 2008 -0600 |
| |
| mpc83xx: add support for more system clock performance controls |
| |
| System registers that are modified are the Arbiter Configuration |
| Register (ACR), the System Priority Control Register (SPCR), and the |
| System Clock Configuration Register (SCCR). |
| |
| Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com> |
| Signed-off by: Joe D'Abbraccio <ljd015@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 16c3cde050e2d243e62b37486f1558570787beb8 |
| Author: James Yang <james.yang@freescale.com> |
| Date: Wed Jan 16 11:58:08 2008 -0600 |
| |
| FSL: Generalize PIXIS reset command parsing. |
| |
| Before, the order of arguments to the pixis_reset |
| command needed to be supplied in a hard-coded order. |
| Generalize the command parsing to allow any order. |
| |
| Signed-off-by: James Yang <james.yang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ad8f8687b78c3e917b173f038926695383c55555 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jan 15 13:42:41 2008 -0600 |
| |
| FSL: Convert board/freescale/common/Makefile to use CONFIG_ |
| |
| Convert the board/freescale/common/Makefile to use |
| CONFIG_* options to select which files to conditionally |
| compile into the board/freescale/common library rather |
| than conditionally compiling entire files. |
| |
| Now handles:: |
| CONFIG_FSL_PIXIS |
| CONFIG_FSL_DIU_FB |
| CONFIG_PQ_MDS_PIB |
| |
| CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7c2221eb230372a9e537c4f6636b147b0909325f |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Tue Jan 15 16:38:38 2008 +0800 |
| |
| Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver |
| |
| Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver. |
| Remove unused ethernet CONFIG_ options. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 711a7946277d2e29af481011e8635e9975c54e45 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 15 14:05:14 2008 -0600 |
| |
| mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value |
| |
| continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601 |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 363eea9ff7f19a2cba17f262bd17559f166e134e |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 15 09:51:12 2008 -0600 |
| |
| mpc83xx: clean up mpc8360emds.c warnings |
| |
| mpc8360emds.c: In function 'ft_board_setup': |
| mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast |
| mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast |
| mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast |
| mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast |
| mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast |
| mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f09880ea72a1c806db223ce594c5fb1b6542ff6a |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Jan 14 16:14:46 2008 -0600 |
| |
| mpc83xx: fix phy-connection-type fixup code |
| |
| use tree passed to us in local blob, not global fdt. |
| |
| Also use fdt_path_offset to convert to relative offset, since absolute |
| reference is needed to check for rgmii-id mode string value. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2b4c952be7c4357a13e839d48df80853820c33eb |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jan 14 09:01:40 2008 -0600 |
| |
| mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s) |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e1d8ed2c08da14b168658cc5fa78529d461aea70 |
| Author: Poonam Aggrwal <b10812@freescale.com> |
| Date: Mon Jan 14 09:41:14 2008 +0530 |
| |
| Changes in uboot DDR configuration for MPC8313eRDB |
| |
| These changes were identified by HighSmith Bill ,Mazzyar and Joseph for |
| DDR configuration in u-boot code. Some are related to performance, some |
| affect stability and some correct few basic errors in the current |
| configuration. |
| |
| The changes have been tested and found to give better memory latency |
| figures on MPC8313eRDB.LMBench figures prove it. |
| |
| The changes are: |
| |
| - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0 |
| (this may improve performance for application with many read |
| or write to open pages). |
| - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to |
| 001 (activating all the CS when only one is used may cause |
| unwanted noise on the system) |
| |
| - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on |
| Tras=45ns) |
| - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks. |
| |
| - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to |
| comply with the 3 ODT clk requirements) |
| - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4. |
| - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks. |
| |
| - DDR_SDRAM_MODE[AL]changed from 0 to 1. |
| - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks. |
| |
| - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510. |
| - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500. |
| |
| The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git |
| The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf |
| |
| Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com> |
| Cc: Bill HighSmith <Bill.Highsmith@freescale.com> |
| Cc: Razzaz Mazyar <MRazzaz@freescale.com> |
| Cc: Josep P J <PJ.Joseph@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Sat Jan 12 13:24:14 2008 -0500 |
| |
| Enable the isdram command on the MPC8360EMDS board |
| |
| The isdram command prints out decoded information the "serial presence |
| detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when |
| debugging memory configuration problems. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8bd522ce4afda3d4868ee8c913f5394094326be1 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 11 18:48:24 2008 +0800 |
| |
| mpc83xx: Add the support for MPC8315ERDB board |
| |
| The features list: |
| - Boot from NOR Flash |
| - DDR2 266MHz hardcoded configuration |
| - Local bus NOR Flash R/W operation |
| - I2C, UART, MII and RTC |
| - eTSEC0/1 support |
| - PCI host |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b05884efa614e4d8a9413158fc228e0dc02ab704 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 11 18:46:50 2008 +0800 |
| |
| mpc83xx: Add config of eTSEC emergency priority in SPCR |
| |
| The TSEC emergency priority definition of 831x/837x |
| is different than the definition of 834x in SPCR register. |
| |
| Add the other config of TSEC emergency priority into |
| cpu_init.c |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9b958234b0783f13d92f007f753fd2c3ae2c8680 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 11 18:42:19 2008 +0800 |
| |
| mpc83xx: Remove cache config from MPC8360ERDK.h |
| |
| The MPC8360ERDK board support patch is added before |
| the commit 2c5b48fc205c3e2752910da8f39209ed075929e5 |
| so, miss clean up it. |
| |
| The patch clean up the miss cache config. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit cd9d23053d435c08fc8695017b5cb9003fcda786 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Jan 14 23:09:32 2008 +0300 |
| |
| nand: FSL UPM NAND driver |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 6cb2239ae76faee64434286c4f8fc71374702dd2 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Tue Jan 15 08:59:44 2008 +0900 |
| |
| OneNAND: Separate U-Boot dependent code from OneNAND |
| |
| OneNAND: Separate U-Boot dependent code from OneNAND |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 16 10:33:46 2008 +0100 |
| |
| ppc4xx: Sequoia coding style cleanup and beautification |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 4b3cc6ece9c455504cf12909fae38d085d848ac0 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Tue Jan 15 14:35:58 2008 -0500 |
| |
| ppc4xx: Refactor ECC POST for AMCC Denali core |
| |
| The ECC POST reported intermittent failures running after power-up on |
| the Korat PPC440EPx board. Even when the test passed, the debugging |
| output occasionally reported additional unexpected ECC errors. |
| |
| This refactoring has three main objectives: (1) minimize the code |
| executed with ECC enabled during the tests, (2) add more checking of the |
| results so any unexpected ECC errors would cause the test to fail, and |
| (3) use synchronization (only) where required by the processor. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 2465665b73ac2f688af945b1ed510752afa816a4 |
| Author: David Saada <David.Saada@ecitele.com> |
| Date: Tue Jan 15 10:40:24 2008 +0200 |
| |
| QE UEC: Extend number of supported UECs to 4 |
| |
| This patch extends the number of supported UECs to 4. Note that the |
| problem of QE thread resources exhaustion is resolved by setting the |
| correct number of QE threads according to Ethernet type (GBE or FE). |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 58d204256cb1ce1bd323847d9f644acf70a72e6a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 16 00:01:01 2008 +0100 |
| |
| LWMON5: enable hush shell as command line parser |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 66ffb1883feedddc813d8a507d060f2a940eb2b2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 15 17:22:28 2008 +0100 |
| |
| ADS5121: disable watchdog; enable image timestamps |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2b4f778fe9d1de61d7445bae7b325340aba6968d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 15 17:21:28 2008 +0100 |
| |
| TK885D: fixes for bigger flash sector sizes on new modules; |
| adjust default environment; |
| disable SCC ethernet (not used on this board). |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jan 15 17:48:13 2008 +0900 |
| |
| pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 76e49aa7fb8e76cc49092c1acd53fff921e26360 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jan 15 23:25:25 2008 +0900 |
| |
| sh: Add support SH7710/SH7712 |
| |
| SH7710/SH7712 of SH3 CPU are supported. |
| SH771X is called SH-Ether, and has the Ether controller in CPU. |
| The driver of Ether is not included in this patch. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 63a11be68306870e04d3851ed9fa41955cdf4894 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jan 15 23:06:17 2008 +0900 |
| |
| sh: Add support of map_physmem() and unmap_physmem() to SuperH |
| |
| This patch add the support of map_physmem() and unmap_physmem() |
| used with Common Flash Interface(CFI) driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit db3995fe5164ac5d630b7ecb96286a9828dfbb54 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Jan 9 14:42:27 2008 +0900 |
| |
| sh: Add maintainer of MS7720SE to the MAINTAINER file |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Jan 9 14:39:58 2008 +0900 |
| |
| sh: Fix board name in MS7720SE's config.mk |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c0a04d93734d768b39dbb72fb501b65614c8615d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Jan 9 14:37:36 2008 +0900 |
| |
| sh: Add MS7720SE to MAKEALL |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Mon Dec 3 22:58:50 2007 +0900 |
| |
| sh: Add support for MS7720RP02 board |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Wed Jan 9 14:30:02 2008 +0900 |
| |
| sh: Add support for SH7720 in serial_sh driver. |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403 |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Mon Dec 3 22:58:45 2007 +0900 |
| |
| sh: Add support SH3 and SH7720 |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 15 10:11:02 2008 +0100 |
| |
| ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 17bef68097ab3692500a36fb31115bff7910aa99 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Mon Jan 14 14:04:42 2008 +0100 |
| |
| ppc_4xx: Fix post spr.c for PPC405 |
| |
| post/cpu/ppc4xx/spr.c contained a few checks for registers only present |
| for PPC440 and derivates processor. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 06c428bcd4413014b43236e77765022071424fa6 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Mon Jan 14 11:12:01 2008 +0800 |
| |
| QE: fix compile warning |
| |
| qe.c: In function 'qe_upload_firmware': |
| qe.c:390: warning: pointer targets in passing argument 2 |
| uec.c: In function 'uec_initialize': |
| uec.c:1236: warning: 'uec_info' may be used uninitialized |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit a0dd99d51efa55fe023e19c97ead92683725eb11 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jan 14 10:05:05 2008 +0100 |
| |
| ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit |
| |
| Now that bit 29 is the USB PHY reset bit, update the Kilauea port |
| to remove the USB PHY reset after powerup. The CPLD will keep the |
| USB PHY in reset (active low) until the bit is set to 1 in |
| board_early_init_f(). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f43ad53908f1ea83a7c26c3505bbe84382e47aad |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 23:26:45 2008 +0100 |
| |
| ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8d103071b7b0e3ec888859bfcb9d422565e6d750 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 23:37:50 2008 +0100 |
| |
| ADS5121: Fix typo in ads5121.c, adjust default environment |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 51b67d06faa670c65de6f29ec5b5aace74b2a047 |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Fri Aug 24 18:18:43 2007 -0600 |
| |
| ADS5121: MAX slew rate for PATA pins |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit dd531aac34aaad138f16cacdb51d61908d59c0e2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 21:05:52 2008 +0100 |
| |
| Fix Makefile dependency problem with parallel builds. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 89967841e3ea02e3d0e5e1295ab687576e5b1089 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 19:51:39 2008 +0100 |
| |
| MPC8544DS: fix board Makefile for silent build (with -s) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 16:44:08 2008 +0100 |
| |
| PMC440 board: fix board Makefile for out-of-tree building |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 16:07:44 2008 +0100 |
| |
| Makalu: fix compile warning |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Jan 13 12:36:12 2008 +0100 |
| |
| cmd_nand : fix compiler warning. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8225d1e3ac0ab147cdde4b0042812583380afb8a |
| Author: Michael Schwingen <rincewind@discworld.dascon.de> |
| Date: Sat Jan 12 20:29:47 2008 +0100 |
| |
| CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 2b2f43ed6a30ece77f76191c845ac95267daa31a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 02:19:44 2008 +0100 |
| |
| MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 02:19:13 2008 +0100 |
| |
| MPC8xx FEC driver: fix compiler warning. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 00:59:21 2008 +0100 |
| |
| Fix Makefile dependencies issues; allow silent build |
| |
| - get rid of "version" target whichdidn't really work |
| - make autoconf.mk depend on version_autogenerated.h to make sure |
| to rebuild files as needed |
| - add XECHO macro to allow for silent build using "make -s" |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e343ab83d5135b558aa58db9be8fc7faa68d77ed |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 00:55:47 2008 +0100 |
| |
| ADS5121e: fix compile warning |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f2b6f4610627fe3d607620e25082916a01538875 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 00:55:18 2008 +0100 |
| |
| MUNICes: fix board Makefile for remote build directory |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a |
| Author: Oliver Weber <almoeli@gmx.de> |
| Date: Wed Jan 9 17:04:38 2008 +0100 |
| |
| MPC5200: don't use hardcoded MBAR address in Bestcomm firmware |
| |
| Signed-off-by: Oliver Weber <almoeli@gmx.de> |
| |
| commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f |
| Author: Andreas Engel <andreas.engel@ericsson.com> |
| Date: Wed Jan 9 17:10:56 2008 +0100 |
| |
| Make bootretry work when command line editing is enabled |
| |
| Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work. |
| This patch fixes the problem. |
| |
| Signed-off-by: Andreas Engel <andreas.engel@ericsson.com> |
| |
| commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Fri Jan 11 23:26:18 2008 -0500 |
| |
| Refactor code for "i2c sdram" command |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 0df6b8446c4721b91ce311548114891130371083 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Thu Jan 10 22:23:39 2008 -0500 |
| |
| Fix "i2c sdram" command for DDR2 DIMMs |
| |
| Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the |
| "i2c sdram" command. This patch provides correct alternative |
| interpretations when DDR2 memory is detected. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 64134f011254123618798ff77c42ba196b2ec485 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jan 12 20:31:39 2008 +0100 |
| |
| Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections |
| |
| With recent toolchain versions, some boards would not build because |
| or errors like this one (here for ocotea board when building with |
| ELDK 4.2 beta): |
| ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] |
| |
| For many boards, the .bss section is big enough that it wraps around |
| at the end of the address space (0xFFFFFFFF), so the problem will not |
| be visible unless you use a 64 bit tool chain for development. On |
| some boards however, changes to the code size (due to different |
| optimizations) we bail out with section overlaps like above. |
| |
| The fix is to add the NOLOAD attribute to the .bss and .sbss |
| sections, telling the linker that .bss does not consume any space in |
| the image. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3afac79ec27b91df185f090b31dad9620779f440 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Fri Jan 11 20:42:58 2008 -0600 |
| |
| USB: Add Philips 1561 PCI-OHCI ids |
| (needed for M5475EVB) |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 5e8def6731cd7bec74bff42a16b139de04010353 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jan 12 15:51:34 2008 +0100 |
| |
| Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101 |
| boards. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5d49e0e152a8b81cc0602271e8fd259371f559b7 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Jan 11 12:03:43 2008 +0100 |
| |
| MPC512X: Cleanup bus clock names. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Jan 8 17:16:59 2008 +0100 |
| |
| MPC512X: Fixed typo in macro name. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Jan 8 17:16:15 2008 +0100 |
| |
| ads5121: Added support for FDT. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jan 12 01:05:50 2008 +0100 |
| |
| Coding Style cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f6db945649e5e9d0c7efe33b507d243cdc86cf03 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 15:15:17 2008 +0100 |
| |
| Fixed syntax error in function init_e300_core() of mpc83xx/start.S if |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 15:15:16 2008 +0100 |
| |
| MUNICes: Set the right CFG_DEFAULT_MBAR value. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 15:15:15 2008 +0100 |
| |
| added the config File for the MUNICes board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 15:15:14 2008 +0100 |
| |
| added basic support for the MUNICes board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jan 12 00:39:37 2008 +0100 |
| |
| Update CHANGELOG and MAINTAINERS files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5ba7390c3cb579172be66888a371707b47b5be4e |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Jan 11 02:15:02 2008 +0100 |
| |
| Fix compilation problem in common/cmd_bmp.c |
| |
| common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP |
| isn't defined. This patch fix this. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 5aa437baae5fe629abeab99bef793a2a1fc71b58 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 01:12:09 2008 +0100 |
| |
| Fix defaultconfig for the mgcoge board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit ac9db066b26935f31bff15c98168b19faeb603f3 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 01:12:08 2008 +0100 |
| |
| Added support for the mgcoge board from keymile. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 01:12:07 2008 +0100 |
| |
| Enable SMC microcode relocation patch for SMC1. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 01:12:06 2008 +0100 |
| |
| Added support for the mgsuvd board from keymile. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit bf05293973b348f6946c9df92cd3c65ece42d0be |
| Author: James Yang <james.yang@freescale.com> |
| Date: Thu Jan 10 16:02:07 2008 -0600 |
| |
| Fix 64-bit vsprintf. |
| |
| There were some size and unsigned problems. |
| Also add support for "ll" size modifier in format string like glibc |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 92fa37eac530860643afa26ae347af3d23d67309 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Wed Jan 9 12:42:35 2008 -0500 |
| |
| Remove superfluous preprocessor conditionals from LM73 driver |
| |
| (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE". |
| |
| (2) Use conditional Makefile.o. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit efc6f447c1b940d1650c4b854c5598a595ddc3da |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Jan 10 17:59:07 2008 +0100 |
| |
| Add support for the TK885D baseboard from TELE-DATA |
| |
| The TK885D board uses a TQM885D module from TQ, this port adds an |
| own configuration file and adds a last_stage_init() method to |
| configure the two PHYs, depending on the phy_auto_nego environment |
| variable. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 10 02:22:05 2008 -0600 |
| |
| Fix compiler warning |
| |
| main.c: In function 'readline_into_buffer': |
| main.c:927: warning: unused variable 'p_buf' |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit bed53753dd1d7e6bcbea4339be0fb7760214cc35 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Jan 11 14:30:01 2008 +0100 |
| |
| Add Fujitsu CoralP/Lime video driver |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Jan 11 02:39:47 2008 +0100 |
| |
| Fix video console newline and carriage return handling |
| |
| Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS |
| are not displayed correctly. This is an attempt to fix |
| this issue. Also add carriage return handling. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 11 15:53:58 2008 +0100 |
| |
| ppc4xx: Fix sdram init on Sequoia boards |
| |
| Clear possible errors in MCSR resulting from data-eye-search. |
| If not done, then we could get an interrupt later on when |
| exceptions are enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d610a60730b7464f6f659db49d264d89a7c71061 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Jan 11 15:31:09 2008 +0100 |
| |
| ppc4xx: Rework Lime support for lwmon5 |
| |
| Rework Lime support for lwmon5 using new video driver |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jan 11 14:55:16 2008 +0100 |
| |
| ppc4xx: Update PMC440 config file |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jan 11 14:55:08 2008 +0100 |
| |
| ppx4xx: Fix sdram init on PMC440 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 061aad4d320dddce26247699dcf2875ee2ea1366 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:09:33 2008 +0800 |
| |
| mpc83xx: Fix the bug of 266MHz data rate DDR |
| |
| The DDR doesn't work on the 266MHz data rate, |
| the patch fix the bug. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ded08317ad9e340b887bf2eb46e9565a0f610a93 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:08:26 2008 +0800 |
| |
| mpc83xx: Make the code more readable |
| |
| Format the code, make it more readable |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:07:23 2008 +0800 |
| |
| mpc83xx: Reduce the latency of DDR |
| |
| Reduce the AL from 2 to 1 clock to improve the performance. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:06:05 2008 +0800 |
| |
| mpc83xx: Fix the wrong definition of MPC8315E |
| |
| According to the latest user manual of MPC8315E, |
| 1) The SVCOD of HRCWL is different than 837x |
| 2) The SCCR has changes |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ec2638ea08a537a1bd409db873aaaa33a053ebae |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:05:00 2008 +0800 |
| |
| mpc83xx: Fix the typo in mpc83xx.h |
| |
| The SPCR about TSEC priority is wrong. |
| |
| Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com> |
| Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:04:13 2008 +0800 |
| |
| mpc83xx: Fix the typo in global data struct |
| |
| Fix the typo in global_data.h |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2c5b48fc205c3e2752910da8f39209ed075929e5 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:03:03 2008 +0800 |
| |
| mpc83xx: Remove cache config from config.h |
| |
| clean up the cache config from configs.h of board |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit fab6f556bbbbd1bb35a5433161f7f173c18df559 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Jan 9 20:57:47 2008 +0300 |
| |
| mpc83xx: add support for the MPC8360E-RDK |
| |
| This is MPC8360E based board with: |
| - 256MB fixed SDRAM; |
| - 8MB Intel Strata NOR flash; |
| - StMICRO 64MiB NAND flash; |
| - two 10/100/1000 ethernet ports connected via Broadcom |
| BCM5481 PHYs; |
| - two 10/100 ethernet ports connected via National |
| DP83848 PHYs; |
| - one PCI and one miniPCI slots; |
| - four serial ports (two NS16550-compatible, two UCCs); |
| - four USB ports working through MPC8360E "FHCI" USB controller; |
| - Fujitsu MB86277 graphics controller; |
| - Analog to Digital Converter/Touchscreen controller, AD7843 |
| connected to SPI. |
| |
| Features not supported in this patch are: |
| - StMICRO 64MiB NAND flash (patch sent); |
| - MINT framebuffer initialization (patch is pending); |
| - Fetching production information from the EEPROM via I2C; |
| - FHCI USB; |
| - Two slow UCCs used as RS-485 UARTs. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Jan 9 20:57:40 2008 +0300 |
| |
| mpc83xx: add "fsl, qe" compatible fixups |
| |
| New device trees will use "fsl,qe" compatible properties. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 977b57583a7c34010e566a09a679ec3c1836f996 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 9 15:24:06 2008 -0600 |
| |
| mpc83xx: add missing CONFIG_HAS_ETH0 defines |
| |
| the new libfdt code only updates eth0 if CONFIG_HAS_ETH0 |
| is defined; add the define to the missing board configs. |
| |
| Thanks to Emilian Medve for finding this. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b830b7f1635984ba607219fcbd78597c28eeb529 |
| Author: Becky Bruce <bgill@freescale.com> |
| Date: Thu Jan 10 14:00:28 2008 -0600 |
| |
| 86xx: Support 2GB DIMMs |
| |
| Configure the number of bits used to address the banks inside the SDRAM |
| device. The default register value of 0 means 2 bits to address 4 banks. |
| Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks. |
| |
| Signed-off-by: Becky Bruce <bgill@freescale.com> |
| |
| commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Thu Jan 10 18:50:33 2008 +0100 |
| |
| ppc4xx: Make Sequoia boot vxWorks |
| |
| vxWorks expects in |
| TLB 0 a entry for the Machine Check interrupt |
| TLB 1 a entry for the RAM |
| TLB 2 a entry for the EBC |
| TLB 3 a entry for the boot flash |
| |
| After changing the baudrate to 9600 I had no problems to boot the |
| vxWorks image as distributed by WindRiver (Revision 2.0/1 from |
| June 18, 2007) |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Wed Jan 9 23:10:27 2008 -0500 |
| |
| ppc4xx: Fix dflush() to restore DVLIM register |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 252f60b068d1f94190b5bcfda169db582387e15e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Jan 10 03:52:44 2008 -0500 |
| |
| Nios2: remove common/cmd_bdinfo.c unused variable. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Scott McNutt <smcnutt@psyent.com> |
| |
| commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Jan 9 18:15:53 2008 -0500 |
| |
| Fix Ethernet init() return codes |
| |
| Change return values of init() functions in all Ethernet drivers to conform |
| to the following: |
| |
| >=0: Success |
| <0: Failure |
| |
| All drivers going forward should return 0 on success. Current drivers that |
| return 1 on success were left as-is to minimize changes. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Acked-By: Timur Tabi <timur@freescale.com> |
| |
| commit d3a6532cbe263d992f49e86ac95bede28e96f9c8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jan 10 00:55:14 2008 +0100 |
| |
| Coding Style cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 9 16:56:54 2008 -0600 |
| |
| Add QE brg freq and correct qe bus freq fdt update code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 890dfef06c2d169a3356359596890754dfb8ee1c |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jan 9 16:34:51 2008 -0600 |
| |
| Remove cache config from ATUM8548 and sbc8548 configs |
| |
| These boards weren't updated by Kumar's config patch because they |
| weren't in the tree, yet. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b8ec2385038c094b07ec5b49336289a46b6e9cc6 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Jan 7 13:31:19 2008 -0600 |
| |
| 85xx: add ability to upload QE firmware |
| |
| Define the layout of a binary blob that contains a QE firmware and instructions |
| on how to upload it. Add function qe_upload_firmware() to parse the blob and |
| perform the actual upload. Add command-line command "qe fw" to take a firmware |
| blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the |
| 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define |
| 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jan 8 01:22:21 2008 -0600 |
| |
| 85xx: Remove cache config from configs.h |
| |
| Either use the standard defines in asm/cache.h or grab the information |
| at runtime from the L1CFG SPR. |
| |
| Also, minor cleanup in cache.h to make the code a bit more readable. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96 |
| Author: robert lazarski <robertlazarski@gmail.com> |
| Date: Fri Dec 21 10:39:27 2007 -0500 |
| |
| mpc85xx: Add support for ATUM8548 (updated) |
| |
| Add support for Instituto Atlantico's ATUM8548 board |
| |
| Signed-off-by: robert lazarski <robertlazarski@gmail.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc |
| Author: robert lazarski <robertlazarski@gmail.com> |
| Date: Fri Dec 21 10:36:37 2007 -0500 |
| |
| mpc85xx: Add support for ATUM8548 (updated) |
| |
| Add support for Instituto Atlantico's ATUM8548 board |
| |
| Signed-off-by: robert lazarski <robertlazarski@gmail.com> |
| |
| commit 9e3ed392d2c8965e24c942b58796c31c644c2f70 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Dec 13 06:45:14 2007 -0600 |
| |
| mpc85xx: Add support for SBC8548 (updated) |
| |
| Add support for Wind River's SBC8548 reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Dec 13 06:45:08 2007 -0600 |
| |
| mpc85xx: Add support for SBC8548 (updated) |
| |
| Add support for Wind River's SBC8548 reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Signed-off by: Andy Fleming <afleming@freescale.com> |
| |
| commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Oct 22 19:58:19 2007 +0400 |
| |
| MPC8568E-MDS: set up QE pario for UART1 |
| |
| To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should |
| be set up appropriately. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit ad162249cb371e9e38971676f09be791e5f3cf4a |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Oct 22 18:12:46 2007 +0400 |
| |
| MPC8568E-MDS: reset UCCs to use them reliably |
| |
| In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset |
| UCCs. |
| |
| p.s Similar code exists in the Linux kernel board file (for capability |
| reasons with older U-Boots), but should be removed some day. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 2146cf56821c3364786ca94a7306008c5824b238 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Dec 19 01:18:15 2007 -0600 |
| |
| Reworked FSL Book-E TLB macros to be more readable |
| |
| The old macros made it difficult to know what WIMGE and perm bits |
| were set for a TLB entry. Actually use the bit masks for these items |
| since they are only a single bit. |
| |
| Also moved the macros into mmu.h out of e500.h since they aren't specific |
| to e500. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1d47273d46925929f8f2c1913cd96d7257aade88 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Dec 18 23:21:51 2007 -0600 |
| |
| Use FSL Book-E MMU macros from Linux Kernel |
| |
| Grab the FSL Book-E MAS register macros from Linux. Also added |
| defines for page sizes up to 4TB and removed SHAREN since it doesnt |
| really exist. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jan 9 13:51:32 2008 -0600 |
| |
| Fix my own merge stupidity |
| |
| Way back in August I merged Heiko's patch: |
| 566a494f592: [PCS440EP] upgrade the PCS440EP board |
| |
| with Jon's CONFIG_COMMANDS patches. |
| |
| This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78 |
| |
| However, in the process, I left out some of Heiko's good changes. |
| |
| Now Heiko's and Jon's patches are properly merged in fat_register_device() |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 6636b62a6efc7f14e6e788788631ae7a7fca4537 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Wed Jan 9 11:17:49 2008 -0600 |
| |
| Expose parse_line() globally. |
| |
| Add new function readline_into_buffer() that allows the |
| output of readline to be put into a pointer to char buffer. |
| |
| This refactoring allows other functions besides the |
| main command loop to also use the same input mechanism. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Wed Jan 9 01:15:25 2008 +0100 |
| |
| trivial: fix consequences of a bad merge |
| |
| Fix what looks like a merge artifact. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 4785a694c0045996ccf0ac5b8edf531efc1b730e |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Jan 3 10:51:15 2008 +0800 |
| |
| Add Ctrl combo key support to usb keyboard driver. |
| |
| Ctrl combo key support is added, which is very useful to input Ctrl-C |
| for interrupt current job. |
| Also add usb_event_poll() calling to usb_kbd_testc(), which can get |
| key input when tstc() is called. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Sun Dec 30 03:30:56 2007 +0100 |
| |
| fix various comments |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 7817cb2083d982923752fe0f12b67c0e7c09a027 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Sun Dec 30 03:30:46 2007 +0100 |
| |
| fix comments with new drivers organization |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit a9b410dc7d2a4721c408b13abfc037988150f145 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Dec 28 12:50:59 2007 +0900 |
| |
| Remove the obsolete terse version of do_mii() |
| |
| We now have more useful version of do_mii() and everybody use it. |
| Gerald Van Baren says: |
| |
| > When I originally wrote the mii command 6(!) years ago, I wrote a |
| > verbose version that printed human readable decomposition of the flags, |
| > etc., and a terse one that didn't print as much stuff and thus had a |
| > smaller memory footprint. |
| > |
| > It sounds like the terse version has withered and died, apparently |
| > people are only using the verbose version (which is very understandable, |
| > I do myself). |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 01c687aa6e065bd4faf80f723361e798941dd6b0 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Dec 27 13:42:56 2007 -0500 |
| |
| Do not reference sha1.c when building mkimage. |
| |
| remove sha1.o from mkimage linking since it isn't actually used. |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b9173af73e524d37c812f210173cf83385c5171a |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Thu Dec 27 15:39:54 2007 +0900 |
| |
| common/cmd_mii.c: Add sanity argc check |
| |
| If type mii command without arguments, we suffer from uninitialized argv[] |
| entries; for example we MIPS get stuck by TLB error. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 500856eb1707ed17d9204baa61dd59948d3b2899 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Wed Jan 9 19:39:36 2008 +0100 |
| |
| API for external applications. |
| |
| This is an API for external (standalone) applications running on top of |
| U-Boot, and is meant to be more extensible and robust than the existing |
| jumptable mechanism. It is similar to UNIX syscall approach. See api/README |
| for more details. |
| |
| Included is the demo application using this new framework (api_examples). |
| |
| Please note this is still an experimental feature, and is turned off by |
| default. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Jan 9 12:14:55 2008 -0600 |
| |
| 86xx: Remove cache config from configs.h |
| |
| Just use the standard defines in asm/cache.h. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 26a41790f8eba19ad450e18ae91351daf485b3e2 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Wed Jan 9 18:05:27 2008 +0100 |
| |
| Globalize envmatch() |
| |
| The newly introduced API (routines related to env vars) will need to call |
| it. |
| |
| Signed-off-by: Rafal Zabdyr <armo@semihalf.com> |
| |
| commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Jan 4 12:07:27 2008 -0600 |
| |
| Convert MPC8610HPCD to use libfdt. |
| |
| Assumes the presence of the aliases node in the DTS to |
| locate the pci and serial nodes for fixups. |
| |
| Use consistent fdtaddr and fdtfile in environment variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Jan 4 11:58:23 2008 -0600 |
| |
| 8610: Fix lingering compile warnings. |
| |
| Turn off DEBUG. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6007f3251c0967adc13f2ed8be1b924ddc30124d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 15:14:46 2008 +0100 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Dec 18 04:29:55 2007 -0500 |
| |
| fix easylogo on big endian dev systems |
| |
| didnt realize how out of shape easylogo actually was until i tried using it. |
| this patch does byte swapping as need be on the input tga header since the tga |
| is in little endian but the host could just as well be big endian. i didnt |
| bother using bswap macros or such stuff from system headers as nothing in |
| POSIX dictates byte swapping functionality. |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 38d299c2db81bd889c601b5dfc12c4e83ef83333 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Dec 18 03:23:25 2007 -0500 |
| |
| cleanup easylogo |
| |
| - make the Makefile not suck |
| - include proper headers for prototypes |
| - fix obvious broken handling of strchr() when handling '.' in filenames |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c |
| Author: raptorbrino@aim.com <raptorbrino@aim.com> |
| Date: Thu Dec 13 21:23:28 2007 -0500 |
| |
| Fix build problems under Cygwin |
| |
| This patch allows u-boot to build without error in a cygwin |
| environment. Cygwin does not define __u64 in it's |
| include/asm/types.h file. The -idirafter flag in the u-boot |
| build causes the inclusion of the cygwin types.h file as opposed |
| to u-bot/include/asm/types.h file which does define __u64. |
| Subsequently, sha1.c compile fails due to unknown symbol. |
| |
| Signed-off-by: Brian Miller <raptorbrino@netscape.net> |
| |
| commit 43ef1c381f9195504a2488f5cb909227eb97d475 |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Fri Nov 30 17:29:59 2007 +0100 |
| |
| cmd_bmp: Add support for displaying gzip compressed bmps |
| |
| The existing code can show information about a gzip compressed BMP |
| image, but can't actually display it. |
| |
| Therefore, move the decompression code out of bmp_info() and use it in |
| bmp_display() as well in order to display a compressed BMP image. |
| |
| Also, clean things up a bit and fix a memory leak while we're at it. |
| |
| [hskinnemoen@atmel.com: a bit of refactoring] |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit d197ffd8172c6fdef38733424640a9a47295d6e9 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Nov 29 21:15:56 2007 +0100 |
| |
| Fix and optimize MII operations on FEC (MPC8xx) controllers |
| |
| This patch fixes several issues at least on a MPC885 based system with two |
| FEC interfaces used in MII mode. |
| |
| 1. PHY discovery should first read PHY_PHYIDR2 register and only then |
| PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it, |
| otherwise the values read are wrong. Also notice, that PHY discovery |
| cannot work on MPC88x / MPC87x in setups with both FECs active at all |
| in its present form, because for both interfaces the registers from FEC |
| 1 are used to communicate over MII. |
| |
| 2. Remove code duplication for resetting the FEC by isolating it into a |
| separate function. |
| |
| 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init(). |
| |
| 4. Optimize mii_init() to only reset the FEC 1 controller once. |
| |
| 5. Fix a typo in mii_init() using index i instead of j thus potentially |
| leading to unpredictable results. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Nov 20 13:14:20 2007 +0100 |
| |
| Fix endianness conversions in rtl8169 driver |
| |
| It is unclear on what platforms this driver has been tested, since |
| noone up to now defines CONFIG_RTL8169 in the board configuration |
| header. Now it has been fixed for a big-endian mpc8241 based |
| linkstation platform. This patch presents the necessary endianness |
| conversion fixes. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 58694f9709c0c3e3178e349ae748d98cfb0c639a |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Jan 3 10:51:15 2008 +0800 |
| |
| Add Ctrl combo key support to usb keyboard driver. |
| |
| Ctrl combo key support is added, which is very useful to input Ctrl-C |
| for interrupt current job. |
| Also add usb_event_poll() calling to usb_kbd_testc(), which can get |
| key input when tstc() is called. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 07eb02687f008721974a2fb54cd7fdc28033ab3c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 13:43:38 2008 +0100 |
| |
| Coding Style clenaup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c26acc1a43b31ddca5add42fd0360ff0eee90c80 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:13:11 2007 +0100 |
| |
| Remove bit swapping in Xilinx Spartan bitfile loading |
| |
| This patch removes the unnecessary bit swapping when |
| booting .bit files with the 'fpga loadb' command. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 437fc7327f0611f82937858f2d80e4cd61b40984 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:13:05 2007 +0100 |
| |
| Fix MSB check in Xilinx Spartan slave serial mode |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 3bff4ffa33729a42645e328a21e8d16488872958 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:56 2007 +0100 |
| |
| Add new Xilinx Spartan FPGA types |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 21d39d598c4e74d4e7761608c79dba2715d40a4c |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:43 2007 +0100 |
| |
| Add pre and post configuration callbacks for Spartan FPGAs |
| |
| This patch adds a post configuration callback for Spartan2/3 FPGAs. |
| pre and post configuration callback are now optional and |
| not called when the function pointer is set to NULL. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 0133502e39ff89b67c26cb4015e0e7e8d9571184 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:34 2007 +0100 |
| |
| Improve configuration of FPGA subsystem |
| |
| This patch removes the FPGA subsystem configuration through |
| the CONFIG_FPGA bitmask configuration option. |
| |
| See README for the new options: |
| |
| CONFIG_FPGA, |
| CONFIG_FPGA_<vendor>, |
| CONFIG_FPGA_<family> |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 95c6bc7d4a3588b452baca610f8c795a83630477 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:55:17 2007 +0100 |
| |
| Add Epson RX8025 RTC support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1208a2dfde02bedd3c5bda29a606632b8e0be058 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:57:23 2007 +0100 |
| |
| serial: Make default_serial_console() a weak function |
| |
| With this patch it is possible to reimplement default_serial_console() |
| in board specific code. This will be done in the upcomming PMC440 |
| U-Boot port. This also allows the lwmon board maintainer to |
| remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:14:47 2007 +0100 |
| |
| add 'terminal program' functionality |
| |
| This patch adds a 'cu' like serial terminal command to u-boot |
| using which you can access other serial ports from the system console. |
| |
| OpenMoko uses this in their Neo1973 phones to get access to the GSM |
| Modem and GPS chip from the bootloader. |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:12:53 2007 +0100 |
| |
| Re-introduce the 'nand read.oob' and 'nand write.oob' commands |
| that used to exist with the legacy NAND code |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit f540c42d9564854b19ce9bbb70affe172529fe70 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:09:58 2007 +0100 |
| |
| Fix building with CRAMFS but not JFFS2 support |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit 23d0baf967fecdaf1804f045f6339337c5607eec |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 22 15:52:58 2007 +0100 |
| |
| Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 23776ff292966a85d811126933830bed48211826 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Dec 11 10:53:12 2007 +0100 |
| |
| ARM: support board-specific ethernet PHY init |
| |
| Add until the new phylib will be arrived |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7b74ebe723e576baedf5a8b6240589b19b845a1b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 8 16:34:08 2007 +0100 |
| |
| IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Dec 9 11:01:10 2007 +0100 |
| |
| Add missing file in gitignore and comments |
| |
| based on Linux source tree's .gitignore files |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 11:36:21 2008 +0100 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b2e2142c500c48a57f18f9dd30e66c13caea0971 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:38:58 2008 +0100 |
| |
| POST: Execute SPR test after relocation |
| |
| On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses |
| self modifying code and this doesn't work with stack in d-cache, since |
| I can't move the code from d-cache to i-cache. We move the SPR test to |
| be executed a little later, after relocation. Then stack is located in |
| SDRAM and this self-modifying code is no problem anymore. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:28:20 2008 +0100 |
| |
| ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore |
| |
| This patch configures the LWMON5 port to use d-cache as init-ram and |
| the unused GPT0_COMP6 as POST WORD storage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1754f50b710194f886b6f2831803d8960171a14d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:25:46 2008 +0100 |
| |
| ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage |
| |
| The privious 4xx POST implementation only supported storing the POST |
| WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer |
| we need to store the POST WORD in some other non volatile location. |
| This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such |
| a location. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:23:16 2008 +0100 |
| |
| ppc4xx: Add 44x cache locking to better support init-ram in d-cache |
| |
| This patch adds support for locking the init-ram/stack in d-cache, |
| so that other regions may use d-cache as well |
| |
| Note, that this current implementation locks exactly 4k of d-cache, |
| so please make sure that you don't define a bigger init-ram area. Take |
| a look at the lwmon5 440EPx implementation as a reference. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0ddb89601a8d29e808db450366752ffdc6267c53 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 10:16:33 2008 +0100 |
| |
| Fix memset bug in ext2fs_read_file() |
| |
| ext2fs_read_file() had the function arguments swapped. |
| |
| Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 32d6f1bc09175f3b77469771e839bc7255a9f22e |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Jan 5 08:17:15 1988 +0100 |
| |
| Fix problems with usb storage devices on MPC5200 /TQM5200 |
| |
| The MPC5200 OHCI controller operates in big endian, so |
| CFG_OHCI_BE_CONTROLLER must be defined for it to work properly. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 8 22:58:27 2008 +0100 |
| |
| Fix compile problem with new env code. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 64b3727b9779d86127cd576e392a987de5ebb9fd |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Nov 27 10:23:20 2007 +0100 |
| |
| tools: fix fw_printenv tool to compile again |
| |
| This patch updates the fw_printenv/fw_setenv userspace tool to include |
| the correct MTD header in order to compile against current kernel |
| headers. Backward compatibility is preserved by introducing an option |
| MTD_VERSION which can be set to "old" for compilation using the old MTD |
| headers. Along with this a number of warnings are fixed. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:40:09 2008 +0100 |
| |
| ppc4xx: assign PCI interrupts on seuqoia boards |
| |
| Some operating systems rely on assigned PCI interrupts. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 6e9233d30afe57cb6e148fbfa4895e7810196fac |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:50:49 2008 +0100 |
| |
| ppc4xx: Move cpu/ppc4xx/vecnum.h into include path |
| |
| This patch allows the use of 4xx interrupt vector number defines |
| in board specific code outside cpu/ppc4xx. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 580d1d3186a2bc6dbdb626941b716dae1788e51e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:39:01 2008 +0100 |
| |
| ppc4xx: Fix UIC2 vector number base |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 12:49:58 2008 +0100 |
| |
| ppc4xx: Update PLB/PCI divider for PMC440 board |
| |
| This patch updates the PLB/PCI divider when running at |
| 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 11:13:09 2008 +0100 |
| |
| ppc4xx: Disable error message when no NAND chip is installed on PMC440 |
| |
| Add CFG_NAND_QUIET_TEST option to disable error message when |
| no NAND chip is installed on PMC440 boards. |
| |
| Disable a couple of config defines that are only used for NAND_U_BOOT. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c83d7ca4dadd44ae430235077f63b64a11f36f6e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 8 22:58:27 2008 +0100 |
| |
| Fix compile problem with new env code. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6de66b35426312a21174a9bf0576a094e2904bea |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Nov 27 10:23:20 2007 +0100 |
| |
| tools: fix fw_printenv tool to compile again |
| |
| This patch updates the fw_printenv/fw_setenv userspace tool to include |
| the correct MTD header in order to compile against current kernel |
| headers. Backward compatibility is preserved by introducing an option |
| MTD_VERSION which can be set to "old" for compilation using the old MTD |
| headers. Along with this a number of warnings are fixed. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit ad3006fe7e84667021753b74247b0bafd97ba35f |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jan 7 23:47:32 2008 -0500 |
| |
| LIBFDT: use memmove() instead of memcpy() |
| |
| This is partial patch from the DTC/libfdt |
| commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Wed Nov 21 11:56:14 2007 +1100 |
| |
| The patch also fixes one genuine bug caught by valgrind - |
| _packblocks() in fdt_rw.c was using memcpy() where it should have been |
| using memmove(). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit aec7135bc300e3340d18f203347ee00c5b5f68c0 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Dec 17 14:42:07 2007 +1100 |
| |
| libfdt: Add more documentation (patch the seventh) |
| |
| This patch adds more documenting comments to libfdt.h. Specifically, |
| these document the read/write functions (not including fdt_open_into() |
| and fdt_pack(), for now). |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Dec 17 14:41:52 2007 +1100 |
| |
| libfdt: Add more documentation (patch the sixth) |
| |
| This patch adds some more documenting comments to libfdt.h. |
| Specifically this documents all the write-in-place functions. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Dec 29 22:45:27 2007 -0500 |
| |
| Fine grained per property /chosen updating. |
| |
| Implement a suggestion by Scott Wood to make the /chosen handling fine |
| grained. Don't overwrite pre-existing properties on a per-property basis, |
| so if /chosen exists but a necessary /chosen/property doesn't, it gets |
| created. If a /chosen property exists, it is NOT overwritten unless the |
| "force" flag is true. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 238cb7a423c6eaa36496efb788cfb9798cea7f95 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Jan 5 15:33:29 2008 -0500 |
| |
| Improve the FDT help message. |
| |
| Add a note that "fdt copy" makes the new address active. |
| Remove most of the extra hints at the end of the fdt help. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Jan 5 14:52:04 2008 -0500 |
| |
| Support setting FDT properties with optional values. |
| |
| Fix a bug found and documented by Bartlomiej Sieka where the optional |
| value on "fdt set <path> <prop> [<val>]" wasn't optional. |
| |
| => fdt mknode / testnode |
| => fdt print /testnode |
| testnode { |
| }; |
| => fdt set /testnode testprop |
| => fdt print /testnode |
| testnode { |
| testprop; |
| }; |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 22fb2246df91bfc840d87f0c5910818bad55577a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 11:56:30 2007 +0100 |
| |
| Add fdt_find_and_setprop() to fdt_support.h |
| |
| fdt_find_and_setprop() is used by several 4xx boards and it's |
| missing in the appropriate header. This patch eliminates a |
| warning when building U-Boot for such boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 802b769bac17b0560d3535a42c502469ee190cd1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 8 18:39:30 2008 +0100 |
| |
| ppc4xx: Return 0 on success in 4xx ethernet driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6775c68683a53c7abc778774641aac6f833a2cbf |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 8 09:59:49 2008 -0600 |
| |
| mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 16:28:34 2007 -0600 |
| |
| mpc83xx: rm remaining FLAT_TREE code |
| |
| ..in board pci.c files |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b3458d2cd55d01732e30a76d898afd99e871cd67 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 15:57:28 2007 -0600 |
| |
| mpc83xx: remove FLAT_TREE code |
| |
| need to rm it from pci code, too! |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5b8bc606c61456566af6912f818a153b6b06f242 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 14:09:22 2007 -0600 |
| |
| mpc83xx: convert to using do_fixup_*() |
| |
| convert to using simpler mpc85xx style fdt update code; streamline by |
| eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm |
| the old school FLAT_TREE code from 83xx (since the sbc8349 was just |
| converted over to using libfdt). |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:58:51 2007 -0500 |
| |
| sbc8349: enable libfdt by default on WRS SBC8349 board. |
| |
| Make libfdt the default for the WRS SBC8349 board. |
| Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef |
| done for the other 83xx based boards. Also fix a typo in CONFIG_PCI. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:58:16 2007 -0500 |
| |
| sbc8349: migrate board to libfdt |
| |
| This adds libfdt support code for the Wind River sbc8349 board. |
| |
| Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for |
| the other Freescale 83xx boards. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:56:19 2007 -0500 |
| |
| sbc8349: Remove board specific ECC code |
| |
| ECC code is now shared for all 83xx boards, so remove board specific one. |
| See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 01:30:48 2007 -0600 |
| |
| mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x) |
| |
| continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ccf21c311e68d48399eff1e72936052885f6e3f7 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Thu Dec 6 16:43:40 2007 +0100 |
| |
| Add support CONFIG_UEC_ETH3 in MPC83xx |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit e6af9932d31171e35db880e7b2f29f903b1b7660 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 11:00:54 2007 -0600 |
| |
| Remove CONFIG options related to OF that we dont use |
| |
| The MPC8360E MDS config defined: |
| CONFIG_OF_HAS_BD_T |
| CONFIG_OF_HAS_UBOOT_ENV |
| |
| Which we don't use or ever needed. This seems like copy-paste feature creep. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f602082b4b7ed4ee16432067cc67a0a24fedc715 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Dec 10 14:16:22 2007 -0600 |
| |
| mpc83xx: supress compiler warning |
| |
| mpc8360emds.c: In function ‘ft_board_setup’: |
| mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type |
| mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c16e44fa835fb9eec982d919863a04e2f78e5ce7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 27 14:17:29 2007 -0600 |
| |
| mpc83xx: fix remaining fdt_find_node_by_path references |
| |
| rename to fdt_path_offset |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 921d4b19ad1be704df58725485d9292dc0414adf |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Nov 19 12:30:09 2007 -0600 |
| |
| mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x |
| |
| Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x. |
| This change guarantees that the environment will be located on the |
| first flash sector after the U-Boot image. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 24f868433b50ecbaa88e118aadc7bd254013c6ae |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Nov 9 14:28:08 2007 -0600 |
| |
| mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid |
| |
| u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type |
| properties in the device tree so the PHY gets configured for internal delay on |
| RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:41:15 2007 +0800 |
| |
| mpc83xx: update the CREDITS and MAINTAINERS |
| |
| update the CREDITS and MAINTAINERS. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit b21add4b42af7b767448251b599b91066a160e0d |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:40:21 2007 +0800 |
| |
| mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds |
| |
| Add the MAINTAINER and MAKEALL entries for mpc837xemds |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit f8900ce9094c462355eb792eea264ff16ac8fd16 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:38:53 2007 +0800 |
| |
| mpc83xx: Add the MPC837xEMDS board readme |
| |
| Add the README.mpc837xemds to /doc |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 19580e660cc8da49f16536a8bd78c047c7bc12e5 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:37:57 2007 +0800 |
| |
| mpc83xx: Add the support of MPC837xEMDS board |
| |
| The MPC837xEMDS board support: |
| * DDR2 400MHz hardcoded and SPD init |
| * Local bus NOR Flash |
| * I2C, UART, MII and RTC |
| * eTSEC RGMII |
| * PCI host |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 555da61702771fe0f76f3de23b4e7590f3704161 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:36:58 2007 +0800 |
| |
| mpc83xx: Add the support of MPC8315E SoC |
| |
| The MPC8315E SoC including e300c3 core and new IP blocks, |
| such as TDM, PCI Express and SATA controller. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 03051c3d35c9981ceaa059005660e699f3eacf1c |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:36:11 2007 +0800 |
| |
| mpc83xx: Add the support of MPC837x SoC |
| |
| The MPC837x SoC including e300c4 core and new IP blocks, |
| such as SDHC, PCI Express and SATA controller. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 651d96f7e4c84adcdb98ef07ec878c20326e3359 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Nov 14 18:54:53 2007 +0300 |
| |
| MPC8360E-MDS: configure and enable second UART |
| |
| Despite user manual, BCSR9.7 is negated (high) on HRST, so |
| UART2 is disabled. Fix that and configure QE pins properly. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit b2893e1fcb28fad8c8b317104df8cee0142c7631 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Nov 5 09:34:06 2007 -0600 |
| |
| 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions |
| |
| Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the |
| currently-defined 83xx boards. This change guarantees that the environment |
| will be located on the first flash sector after the U-Boot image. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e05329516a13616b53240cd85b739217c2bf87f1 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Fri Jan 4 13:27:02 2008 -0500 |
| |
| ppc4xx: Remove weak binding from common Denali data-eye search code |
| |
| Now that there are no board-specific versions of |
| "denali_core_search_data_eye()", the weak binding on the common version |
| can be removed. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 5ba576c01602fd328800a427964c36a0a05c5dce |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 09:13:46 2008 +0100 |
| |
| ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 09:12:41 2008 +0100 |
| |
| ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup |
| |
| On Katmai the complete auto-calibration somehow doesn't seem to |
| produce the best results, meaning optimal values for RQFD/RFFD. |
| This was discovered by GDA using a high bandwidth scope, |
| analyzing the DDR2 signals. GDA provided a fixed value for RQFD, |
| so now on Katmai "only" RFFD is auto-calibrated. |
| |
| This patch also adds RDCC calibration as mentioned on page 7 of |
| the AMCC PowerPC440SP/SPe DDR2 application note: |
| "DDR1/DDR2 Initialization Sequence and Dynamic Tuning" |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 49db47b8ae6afff2b898be312948ff501357dc80 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 16:48:42 2008 +0100 |
| |
| ppc4xx: Remove sdram.h from PMC440 board |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 16:48:34 2008 +0100 |
| |
| ppc4xx: use common denali core defines and data eye search code for PMC440 |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 12:05:14 2008 +0100 |
| |
| ppc4xx: More cleanup for esd's LCD code |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 4 12:00:01 2008 +0100 |
| |
| ppc4xx: Fix Sequoia NAND booting target |
| |
| The Sequoia NAND booting target now uses the recently extracted |
| cpu/ppc4xx/denali_data_eye.c file too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0ddd969aec532bd7eae30fc09590488a3aaa629a |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Thu Jan 3 15:02:02 2008 -0500 |
| |
| ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit b05e8bf58be9d8956fdfde3d8c8e87c140414663 |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Fri Jan 4 02:11:56 2008 -0500 |
| |
| ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board |
| |
| Note: this patch changes the configuration of some GPIO registers: |
| |
| Register Old Value New Value |
| --------------- ---------- ---------- |
| DCR GPIO0_TCR 0x0000000F 0x0000F0CF |
| DCR GPIO0_TSRH 0x55005000 0x00000000 |
| DCR GPIO1_TCR 0xC2000000 0xE2000000 |
| DCR GPIO1_TSRL 0x0C000000 0x00200000 |
| DCR GPIO1_ISR2L 0x00050000 0x00110000 |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 5ab884b254ca2e707ab50545cd705f30108cf491 |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Thu Jan 3 18:54:00 2008 -0500 |
| |
| ppc4xx: Add functionality to GPIO support |
| |
| This patch makes two additions to GPIO support: |
| |
| First, it adds function gpio_read_in_bit() to read the a bit from the |
| GPIO Input Register (GPIOx_IR) in the same way that function |
| gpio_read_out_bit() reads a bit from the GPIO Output Register |
| (GPIOx_OR). |
| |
| Second, it modifies function gpio_set_chip_configuration() to provide |
| an additional option for configuring the GPIO from the |
| "CFG_4xx_GPIO_TABLE". |
| |
| According to the 440EPx User's Manual, when an alternate output is used, |
| the three-state control is configured in one of two ways, depending on |
| the particular output. The first option is to select the corresponding |
| alternate three-state control in the GPIOx_TRSH/L registers. The second |
| option is to select the GPIO Three-State Control Register (GPIOx_TCR) in |
| the GPIOx_TRSH/L registers, and set the corresponding bit in the |
| GPIOx_TCR register to enable the output. For example, the Manual |
| specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use |
| the alternate three-state control (first option), and specifies |
| configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output |
| enabled in the GPIOx_TCR register (second option). |
| |
| Currently, gpio_set_chip_configuration() configures all alternate signal |
| outputs to use the first option. This patch allow the second option to |
| be selected by setting the "out_val" element in the table entry to |
| "GPIO_OUT_1". The first option is used when the "out_val" element is |
| set to "GPIO_OUT_0". Because "out_val" is not currently used when an |
| alternate signal is selected, and because all current GPIO tables set |
| "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should |
| not change any existing configurations. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 196404cdc1de495d6182e84731c200fc5748df15 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:54 2007 -0500 |
| |
| PPC4xx: Remove sdram.h from board/lwmon5 |
| |
| These definitions are now in "include/ppc440.h". |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:32 2007 -0500 |
| |
| PPC4xx: Use common code for LWMON5 board SDRAM support |
| |
| This patch also modifies the functionality of the code so that the data-eye |
| search is now done with with the cache disabled. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 62cc3951ab72135d9c101f1845b794e63a0fa189 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:14 2007 -0500 |
| |
| PPC4xx: Remove sdram.h from board/amcc/sequoia |
| |
| These definitions are now in "include/ppc440.h". |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:00:50 2007 -0500 |
| |
| PPC4xx: Use common code for Sequoia board SDRAM support |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8b0c5c127690335758100c25eaec2b84db97c101 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:58:41 2007 +0100 |
| |
| net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option |
| |
| When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's |
| networking stack does not automatically switch to |
| another interface. This patch does not touch the default |
| behavior. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32 |
| Author: Upakul Barkakaty <upakul@gmail.com> |
| Date: Thu Nov 29 12:16:13 2007 +0530 |
| |
| NET: Proper return code handling in eth_init() function in file eth.c |
| |
| This patch modifies the return code handling in the eth_init() |
| function, to be compatible with the handling of the return codes in |
| the other network stack files. It now returns a 0 on Success and -1 on |
| error. |
| |
| Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5ca2d0953e4579a80810966cca2077e20d912c97 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Mon Nov 19 20:27:04 2007 +0900 |
| |
| net/eth.c: Fix env_enetaddr signed overflow |
| |
| Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are |
| warned as below: |
| |
| U-Boot 1.2.0 (Aug 30 2007 - 08:27:37) |
| |
| DRAM: 256 MB |
| Flash: 32 MB |
| In: serial |
| Out: serial |
| Err: serial |
| Net: NEC-Candy |
| Warning: NEC-Candy MAC addresses don't match: |
| Address in SROM is 00:00:4C:80:92:A2 |
| Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21 |
| |
| This patch changes env_enetaddr type from `char' to `unsigned char'. |
| |
| Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp> |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f85b60710571b37293d2233933b76e2aa3db5635 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Thu Dec 27 18:19:02 2007 +0100 |
| |
| Introduce new eth_receive routine |
| |
| The purpose of this routine is receiving a single network frame, outside of |
| U-Boot's NetLoop(). Exporting it to standalone programs that run on top of |
| U-Boot will let them utilise networking facilities. For sending a raw frame |
| the already existing eth_send() can be used. |
| |
| The direct consumer of this routine is the newly introduced API layer for |
| external applications (enabled with CONFIG_API). |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5c740711f0ea5b51414b341b71597c4a0751be74 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jan 3 10:41:04 2008 -0600 |
| |
| 8610: Move include of config.h earlier. |
| |
| Include config.h earlier in the set of #includes |
| so as to avoid a incidental and duplicate definition |
| of CFG_CACHELINE_SIZE. |
| |
| Signed-off-by: Jon Loeliger |
| |
| commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Dec 4 10:53:34 2007 -0600 |
| |
| Don't slam #undef DEBUG in the 8641HPCN config file. |
| |
| Doing so prevents it from being individually set |
| and useful in other files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Nov 28 14:47:18 2007 -0600 |
| |
| Convert MPC8641HPCN to use libfdt. |
| |
| Assumes the presence of the aliases node in the DTS to |
| locate the ethernet, pci and serial nodes for fixups. |
| |
| Use consistent fdtaddr and fdtfile in environment variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ce37422d0002e10490e268392e0c4e3028e52cec |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 2 14:06:26 2008 +0100 |
| |
| cfi_flash: Fix bug in flash_isset() to use correct 32bit function |
| |
| This bug was detected on the LWMON5 target which has 2 Intel 16bit wide |
| flash chips connected to a 32bit wide port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1182e9f8e3b92fc372d64943293de53daa2e26cf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 15:58:44 2008 +0100 |
| |
| Fix compile problem introduced by "cleanup" commit 3dfd708c |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 15:54:45 2008 +0100 |
| |
| Make scripts and Makefiles POSIX compliant |
| |
| The bash builtin versions of the "test" (resp. "[") command allow |
| using "==" for string comparisons, but POSIX compatible implemen- |
| tations (like /usr/bin/test) insist on using "=" only. On such systems |
| you will see: |
| |
| $ /usr/bin/test a == a && echo OK |
| /usr/bin/test: ==: binary operator expected |
| |
| This patch fixes Makefiles and scripts to use POSIX style. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 47cc23cbe9a669c510183f4f049bf703ef445f3b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 2 14:05:37 2008 +0100 |
| |
| cfi_flash: Fix bug in flash_isset() to use correct 32bit function |
| |
| This bug was detected on the LWMON5 target which has 2 Intel 16bit wide |
| flash chips connected to a 32bit wide port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 12:38:43 2008 +0100 |
| |
| Minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e174ac34adf5d5653df12bc3cf19c52063a71269 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 17:29:56 2007 +0100 |
| |
| ppc4xx: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:24 2007 +0100 |
| |
| ppc4xx: Complete PMC440 board support |
| |
| This patch brings the PMC440 board configuration file. |
| Finally it enables the PMC440 board support. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 407843a582560fc5231299561ab3c2b6b6cd3397 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:18 2007 +0100 |
| |
| ppc4xx: Add FPGA support and BSP commands for PMC440 boards |
| |
| This patch adds some BSP commands and FPGA booting support |
| for esd's PMC440 boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 72c5d52aedcce35e4b4fa5895605554825b6a76f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:14 2007 +0100 |
| |
| ppc4xx: Add initial esd PMC440 board files |
| |
| This patch adds the first files for the new esd PMC440 boards. |
| The next two patches will complete the PMC440 board support. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:36 2007 +0100 |
| |
| ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates |
| |
| - add EEPROM write protection for esd PLU405 boards. |
| - initialize NAND GPIOs |
| - use correct io accessors |
| - cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 77660c4b59055d621d2a8595bd4c18bb277268fc |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:44 2007 +0100 |
| |
| ppc4xx: use correct io accessors for esd's LCD code |
| |
| This patch fixes esd's LCD dectection code to work correctly with |
| newer gcc versions. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:42 2007 +0100 |
| |
| ppc4xx: Maintenance patch for VOH405 boards |
| |
| - add EEPROM write protection |
| - initialize NAND GPIOs |
| - use correct io accessors |
| - slow down I2C clock to 100kHz |
| - enable ext. I2C bus |
| - cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c05569066dbcba3fdf36d4d1943df265dc316a86 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 16:08:08 2007 +0100 |
| |
| ppc4xx: Enable 405EP PCI arbiter per default on all boards |
| |
| In an attmemt to clean up the 4xx start.S file, I removed the enabling |
| of the internal 405EP PCI arbiter. This is needed for multiple other |
| 405EP platforms, like most of the esd 405EP. Now the internal PCI |
| arbiter is enabled again per default as it has been before. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 15:53:46 2007 +0100 |
| |
| ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 06:06:04 2007 +0100 |
| |
| ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target |
| |
| Use correct link to nand_ecc now located in drivers/mtd/nand/ for the |
| platforms mentioned above. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b568fd25574181a3b12ae3d66b2913903442cb83 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:03:46 2007 +0100 |
| |
| Remove CPCI440 board |
| |
| This board never left prototyping state and it |
| became a millstone round my neck. So remove it. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c591dffe0cbacd896ccbad06011fe6d6afa080da |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 11:28:51 2007 -0500 |
| |
| Add support for Korat PPC440EPx board |
| |
| These patches add support for the PPC440EPx-based "Korat" board to |
| U-Boot. They are based primarily on support for the Sequoia board. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 87dc096829e6a6363f4fdd73653b0093a85adbe0 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:16:25 2007 -0500 |
| |
| Add configuration file for Korat board |
| |
| This patch supplies the configuration file for the Korat PPC440EPx- |
| processor board. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:16:11 2007 -0500 |
| |
| Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit aba19604d848b2838cfb9ebe818909e6a216058e |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 10:54:48 2007 -0500 |
| |
| Add 440EPx DDR2 SPD DIMM support |
| |
| This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM |
| controller. It should also work on the 440GRx. It is based on the DDR2 |
| SPD code for the 440EP/440EPx, but makes no provision for DDR1 support. |
| |
| This code has been tested on prototype Korat boards with three Kingston |
| DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC |
| (two ranks). The Korat board has a single DIMM socket, but support has |
| been provided (though not tested) for boards with two DIMM sockets. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:15:30 2007 -0500 |
| |
| Copy 440EPx/GRx SDRAM data-eye search to common directory |
| |
| This patch creates a non-board-specific file for performing the SDRAM |
| data-eye search. It also adds ECC error checking to the test of valid |
| data on readback when ECC is enabled. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c46f53333b22b1f9098676bea8884fc7db820cf3 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:15:13 2007 -0500 |
| |
| Add definitions for 440EPx/GRx SDRAM controller to ppc440.h |
| |
| This patch adds the Denali SDRAM controller definitions to "ppc440.h". |
| It also fixes two typos in the definitions, so the board-specific |
| "sdram.h" files containing these definitions are also fixed to avoid |
| compiler warnings. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c348578bf612d0c56d8d376d23cae16defbd86af |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 10:50:55 2007 -0500 |
| |
| Add Ethernet 1000BASE-X support for PPC4xx |
| |
| This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol |
| is defined, the PHY will advertise it's capabilities for autonegotiation |
| based on the capabilities shown in the PHY's status registers, including |
| 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will |
| advertise hard-coded capabilities, as before. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 09:52:17 2007 -0500 |
| |
| Add driver for National Semiconductor LM73 temperature sensor |
| |
| This driver is based on the driver for the LM75. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 12618278688ea9b3d76536960a5ad2e3790fac40 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:14:00 2007 -0500 |
| |
| Add driver for STMicroelectronics M41T60 RTC |
| |
| This driver is based on the driver for the M41T11. In the intended |
| application, the RTC will be powered by a large capacitor, rather than a |
| battery. The driver therefore checks to see whether the RTC has lost |
| power. The chip's OUT bit is normally reset from its power-up state. If |
| the OUT bit is read as set, or if the date and time are not valid, then the |
| RTC is assumed to have lost power, and its date and time are reset to |
| 1900-01-01 00:00:00. |
| |
| Support for adjusting the speed of the clock to improve accuracy is |
| provided through an environment variable. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit d3471173e14b7544bb60339eda8d3d3906694b0a |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:34:39 2007 -0500 |
| |
| Use out_be32() and friends to access memory-mapped registers in sequoia.c |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c68f59fe3ec16769f82b5fca7421983c336d3aac |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:34:20 2007 -0500 |
| |
| Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:23:50 2007 -0500 |
| |
| Cosmetic changes to ECC POST for AMCC Denali core |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 2e583d6c81034f80a267b89fa55498ae063ccef1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Dec 26 20:20:19 2007 +0100 |
| |
| ppc4xx: Fix compilation problem in 405 cache POST test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 22 12:20:09 2007 +0100 |
| |
| ppc4xx: Move virtual address of POST cache test to bigger address |
| |
| On Sequoia & LWMON5 the virtual address of the POST cache test is now |
| moved to a bigger address. This enables usage of more memory on those |
| boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d91722102cf63f77a0148ed3f3d54a26d87575e9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 22 12:18:26 2007 +0100 |
| |
| ppc4xx: Fix problem in 44x cache POST routine |
| |
| As repoted by Larry Johnson, running "diag run cache" caused a crash |
| in U-Boot. This problem was introduced by a patch that removed the |
| TLB entry for the cache test after the test has completed. Since this |
| TLB was only setup once, a 2nd attempt to run this cache test |
| failed with a crash. Now this TLB entry is created every time the |
| routine is called. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b0265b576bb8fa9465f99e99c323768b562fadc2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 21 07:51:29 2007 +0100 |
| |
| ppc4xx: Update Makalu fdt support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Dec 19 09:05:40 2007 +0100 |
| |
| ppc4xx: Add fdt support to AMCC Katmai eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 328a340392a5df9aaf00792be989df73e750859e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 18 08:44:51 2007 +0100 |
| |
| ppc4xx: fdt: Cleanup setup of cpu node setup |
| |
| Now the cpu node setup ("timebase-frequency" and "clock-frequency") is |
| without using the absolute path to the cpu node. This makes it possible |
| to use this U-Boot version with both versions of cpu-node naming |
| "cpu@0" and the former "PowerPC,440EPx@0". |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Dec 17 17:26:21 2007 +0100 |
| |
| ppc4xx: Fix lwmon5 compilation problem |
| |
| Now that the 440EPx ECC test is not board specific anymore |
| remove this Makefile. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62 |
| Author: Anatolij Gustschin <agustschin@t-online.de> |
| Date: Wed Dec 5 17:43:20 2007 +0100 |
| |
| Fix ppc4xx clear_bss() code |
| |
| ppc4xx clear_bss() fails if BSS segment size is not |
| divisible by 4 without remainder. This patch provides |
| fix for this problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Nov 30 18:35:11 2007 +0100 |
| |
| PPC4xx: Minimal changes to add vxWorks support |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 052440b022ca8981d39b6f8c10d1aa6326f47480 |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Fri Nov 23 13:09:18 2007 +0100 |
| |
| ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config |
| |
| When using dhcp/bootp the "netmask" environment variable is not |
| set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is |
| desireable, so the following patch adds this this option to the board |
| config. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Oct 27 12:48:15 2007 -0400 |
| |
| Fix/enhance ECC POST for 440EPx/GRx |
| |
| This patch allows the ECC POST to be used for different boards with the |
| PPC440 Denali SDRAM controller. Modifications include skipping the test |
| if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization |
| to prevent timing errors. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Oct 27 12:48:05 2007 -0400 |
| |
| PPC4xx: Move/rename ECC POST for 440EPx/GRx |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c29d2d3680046d430022c55e50fcb27f5866517e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 14 11:20:33 2007 +0100 |
| |
| ppc4xx: use correct io accessors for 4xx ethernet POST |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ba79fde58a48c0a6ff8e2a96caba951594142203 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 14 11:19:56 2007 +0100 |
| |
| ppc4xx: fix flush + invalidate_dcache_range arguments |
| |
| flush + invalidate_dcache_range() expect the start and stop+1 address. |
| So the stop address is the first address behind (!) the range. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 14 08:41:29 2007 +0100 |
| |
| ppc4xx: fdt: use fdt_fixup_ethernet() |
| |
| By using aliases in the dts file, the ethernet node fixup is |
| much easier with the recently added functions. |
| |
| Please note that the dts file needs the aliases for this to work. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 136288847e3b04f2ff357a067ad45e10afa0a24c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 13 14:52:53 2007 +0100 |
| |
| ppc4xx: Bring 4xx fdt support up-to-date |
| |
| This patch update the 4xx fdt support. It enabled fdt booting |
| on the AMCC Kilauea and Sequoia for now. More can follow later |
| quite easily. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 27 07:50:54 2007 +0100 |
| |
| cfi_flash: Add missing check for erased dest to flash_write_cfibuffer() |
| |
| The check for an sufficiently erased destination was missing in the |
| buffered write function of the cfi flash driver (when |
| CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that |
| writing to such a region will fail with the currect error message. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Nov 12 10:56:17 2007 +0100 |
| |
| Some configuration updates for the TQM5200 based TB5200 board: |
| |
| - enable command line history |
| - increase malloc space (because of bigger flash sectors) |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit e318d9e9021a0af7508171f84ed09d0e79f0284e |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Sep 27 11:10:08 2007 +0200 |
| |
| TQM8xx: use the CFI flash driver on all TQM8xx boards |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 11d9eec479b470eab9242ab937fca70a876d9376 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM885D: adjust for doubled flash sector size + some minor fixes |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Wed Sep 26 17:55:54 2007 +0200 |
| |
| TQM885D: Exchanged SDRAM timing by a more relaxed timing. |
| |
| CAS-Latency=2, Write Recovery Time tWR=2 |
| The max. supported bus frequency is 66 MHz. Therefore, changed |
| threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit b988b8cd443989be65161888eea0127ad03f846f |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM885D: use calculated cpuclk instead of measuring it |
| |
| On the TQM885D the measurement of cpuclk with the PIT reference |
| timer ist not necessary. Since all module variants use the same |
| external 10 MHz oscillator, the cpuclk only depends on the PLL |
| configuration - which is readable by software. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 492c7049869348d31168de8dad89651315e468e0 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Thu Sep 27 14:54:46 2007 +0200 |
| |
| TQM885D: fix SDRAM refresh |
| |
| At 133 MHz the current SDRAM refresh rate is too fast |
| (measured 4 * 1.17 us). |
| CFG_MAMR_PTA changes from 39 to 128. This result |
| in a refresh rate of 4 * 7.8 us at the default clock |
| 66 MHz. At 133 MHz the value will be then 4 * 3.8 us. |
| This is a compromise until a new method is found to |
| adjust the refresh rate. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit dabad4b9bc46908e301f73ce76b38b23626a96e9 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Thu Sep 27 14:54:46 2007 +0200 |
| |
| TQM860M: Support for 10col SDRAMs, max. 128 MiB |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 61fb15c516fef5631e305f1976d7b3a679725856 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 27 01:52:50 2007 +0100 |
| |
| Fix coding style issues; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 467bcee11fe26ad422f2de971aa70866079870f2 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:18 2007 +0100 |
| |
| cfi_flash: Add manufacturer-specific fixups |
| |
| Run fixups based on the JEDEC manufacturer ID independent of the |
| command set ID. |
| |
| This changes current behaviour: Previously, geometry reversal for AMD |
| chips were done based on the command set ID, while they are now done |
| based on the JEDEC manufacturer and device ID. |
| |
| Also add fixup for top-boot Atmel chips. A fixup is needed for |
| AT49BV6416(T) too, but since u-boot currently only reads the low byte |
| of the device ID, there's no way to tell it apart from AT49BV642D, |
| which should not have this fixup. Since AT49BV642D support is |
| necessary to get ATNGW100 board support into mainline, I've commented |
| out the fixup for now. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:17 2007 +0100 |
| |
| cfi_flash: Add cmdset-specific init functions |
| |
| Move things like reading JEDEC IDs and fixing up geometry reversal |
| into separate functions. The geometry reversal fixup is now performed |
| by altering the qry structure directly, which makes the sector init |
| code slightly cleaner. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit e23741f4a6d8047520ef0d4971762749b3587d32 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:16 2007 +0100 |
| |
| cfi_flash: Read whole QRY structure in one go |
| |
| Read out the whole CFI Standard Query structure after successful cfi |
| identification. This allows subsequent code to access this information |
| directly without having to go through flash_read_uchar() and friends. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Dec 17 11:02:44 2007 +0100 |
| |
| AVR32: Fix logic inversion in disable_interrupts() |
| |
| disable_interrupts() should return nonzero if interrupts were |
| _enabled_ before, not disabled. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit acac475212cbedb17b321a363a1c878e2b47b37f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 16:51:22 2007 +0100 |
| |
| AVR32: Enable interrupts at bootup |
| |
| The timer code depends on the timer interrupt to keep track of the |
| upper 32 bits of the cycle counter. This obviously doesn't work when |
| interrupts are disabled the whole time. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9570bcd87f4db255514f43b6701746c412f8fef0 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 15 10:03:45 2007 +0100 |
| |
| AVR32: Fix wrong pin setup for USART3 |
| |
| As reported by Gerhard Berghofer: |
| |
| in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18 |
| instead of PB18 and PB19. |
| |
| which is obviously correct. There's currently no code that uses |
| USART3, but custom boards may run into problems. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 1 12:44:20 2007 +0100 |
| |
| README: Remove ATSTK1000 daughterboard list |
| |
| As noted by Kim Phillips, these lists tend to become out of date. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c81cbbad21cb0ae983e2e796211202234cdc8be2 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Tue Oct 30 14:56:36 2007 +0100 |
| |
| Add ATSTK100[234] to MAINTAINERS |
| |
| Add all the ATSTK1000 daughterboards to MAINTAINERS along with their |
| "mother". Also update the entry for ATSTK1000 to be not only about the |
| AP7000 CPU; it's intended to handle all CPUs in the AT32AP family. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 64ff2357b1727213803591813dbc779c924bf772 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:02:54 2007 +0100 |
| |
| AVR32: Add support for the ATSTK1004 board |
| |
| ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU, |
| which is a derivative of AT32AP7000. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 667568db157f374b85abd7e03596ddd1f0b25681 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:02:54 2007 +0100 |
| |
| AVR32: Add support for the ATSTK1003 board |
| |
| ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU, |
| which is a derivative of AT32AP7000. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5fee84a794a51ec830548cda485a770efb018b92 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:23:33 2007 +0100 |
| |
| AVR32: Make some AT32AP700x peripherals optional |
| |
| Add a chip-features file providing definitions of the form |
| |
| AT32AP700x_CHIP_HAS_<peripheral> |
| |
| to indicate the availability of the given peripheral on the currently |
| selected chip. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 36f28f8a9605ee5dcfa330482cfc62171261af97 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:09:56 2007 +0100 |
| |
| AVR32: Rename at32ap7000 -> at32ap700x |
| |
| The SoC-specific code for all the AT32AP700x CPUs is practically |
| identical; the only difference is that some chips have less features |
| than others. By doing this rename, we can add support for the AP7000 |
| derivatives simply by making some features conditional. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jun 29 18:22:34 2007 +0200 |
| |
| atmel_mci: Show SR when block read fails |
| |
| Show controller status as well as card status when an error occurs |
| during block read. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 13 14:52:53 2007 +0100 |
| |
| ppc4xx: Bring 4xx fdt support up-to-date |
| |
| This patch update the 4xx fdt support. It enabled fdt booting |
| on the AMCC Kilauea and Sequoia for now. More can follow later |
| quite easily. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 12d30aa79779c2aa7a998bbae4c075f822a53004 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:34 2007 +0100 |
| |
| cfi_flash: Use map_physmem() and unmap_physmem() |
| |
| Use map_physmem() and unmap_physmem() to convert from physical to |
| virtual addresses. This gives the arch a chance to provide an uncached |
| mapping for flash accesses. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 4d7d6936eb29af7cca330937808312aa5f61454d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:33 2007 +0100 |
| |
| Introduce map_physmem() and unmap_physmem() |
| |
| map_physmem() returns a virtual address which can be used to access a |
| given physical address without involving the cache. unmap_physmem() |
| should be called when the virtual address returned by map_physmem() is |
| no longer needed. |
| |
| This patch adds a stub implementation which simply returns the |
| physical address cast to a uchar * for all architectures except AVR32, |
| which converts the physical address to an uncached virtual mapping. |
| unmap_physmem() is a no-op on all architectures, but if any |
| architecture needs to do such mappings through the TLB, this is the |
| hook where those TLB entries can be invalidated. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:32 2007 +0100 |
| |
| cfi_flash: Introduce read and write accessors |
| |
| Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use |
| them to access the flash memory. This makes it clearer when the flash |
| is actually being accessed; merely dereferencing a volatile pointer |
| looks just like any other kind of access. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 812711ce6b3a386125dcf0d6a59588e461abbb87 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:31 2007 +0100 |
| |
| Implement __raw_{read,write}[bwl] on all architectures |
| |
| This adds implementations of __raw_read[bwl] and __raw_write[bwl] to |
| m68k, ppc, nios and nios2. The m68k and ppc implementations were taken |
| from Linux. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Oct 6 18:55:36 2007 +0200 |
| |
| cfi_flash: Reorder functions and eliminate extra prototypes |
| |
| Reorder the functions in cfi_flash.c so that each function only uses |
| functions that have been defined before it. This allows the static |
| prototype declarations near the top to be eliminated and might allow |
| gcc to do a better job inlining functions. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 3055793bcbdf24b1f8117f606ffb766d32eb766f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:29 2007 +0100 |
| |
| cfi_flash: Make some needlessly global functions static |
| |
| Make functions not declared in any header file static. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7e5b9b471518c5652febc68ba62b432193d6abf4 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:28 2007 +0100 |
| |
| cfi_flash: Break long lines |
| |
| This patch tries to keep all lines in the cfi_flash driver below 80 |
| columns. There are a few lines left which don't fit this requirement |
| because I couldn't find any trivial way to break them (i.e. it would |
| take some restructuring, which I intend to do in a later patch.) |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Dec 11 13:59:57 2007 +0100 |
| |
| CFI: synchronize command offsets with Linux CFI driver |
| |
| Fixes non-working CFI Flash on the Inka4x0 board. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 12:17:34 2007 -0600 |
| |
| Handle MPC85xx PCIe reset errata (PCI-Ex 38) |
| |
| On the MPC85xx boards that have PCIe enable the PCIe errata fix. |
| (MPC8544DS, MPC8548CDS, MPC8568MDS). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 12:04:30 2007 -0600 |
| |
| Update Freescale MPC85xx ADS/CDS/MDS board config |
| |
| * Enabled CONFIG_CMD_ELF |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d435793229ce29a42797c1edc39f5b34f987f91a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 04:59:26 2007 -0600 |
| |
| Handle Asynchronous DDR clock on 85xx |
| |
| The MPC8572 introduces the concept of an asynchronous DDR clock with |
| regards to the platform clock. |
| |
| Introduce get_ddr_freq() to report the DDR freq regardless of sync/async |
| mode. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:34:28 2007 -0600 |
| |
| Update Freescale MPC85xx ADS/CDS/MDS board config |
| |
| * Removed some misc environment setup |
| * Enabled CONFIG_CMDLINE_EDITING |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 415a613babb84d5e5d5b42e8e553868c71fc3a64 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:47:44 2007 -0600 |
| |
| Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:16:18 2007 -0600 |
| |
| Move the MPC8540 ADS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 870ceac5b3a3486c109396e005af81ae762b5710 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:14:50 2007 -0600 |
| |
| Move the MPC8560 ADS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit acbca876fb3fec25cd9c55b0efc81ff618ff5262 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:13:47 2007 -0600 |
| |
| Move the MPC8568 MDS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a853d56c59b33415304531443633808736acfc6e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 02:18:59 2007 -0600 |
| |
| Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx |
| |
| We already had defines for LAWAR_TRGT_IF_* that we should use |
| rather than creating new ones. Also, added some missing defines for |
| PCIE targets. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 04db400892da37b76a585e332a0c137954ad2015 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 02:10:09 2007 -0600 |
| |
| Stop using immap_t on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_*_ADDR as the base of the registers |
| instead of getting it via &immap. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2714223f8e04ab3e4133ff65872eef366d90bfea |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 01:23:09 2007 -0600 |
| |
| Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c480861bf000156e6a3e932c258db59ff2212dd3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 01:06:19 2007 -0600 |
| |
| Update MPC8568 MDS to use libfdt |
| |
| Updated the MPC8568 MDS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Nov 14 15:52:06 2007 -0500 |
| |
| Add PCI Express support on MPC8568MDS |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b90d25497625b90ffa3f2911a0895ca237556ff5 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 00:11:44 2007 -0600 |
| |
| Update MPC85xx CDS to use libfdt |
| |
| Updated the MPC85xx CDS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 22:54:27 2007 -0600 |
| |
| Update MPC8540 ADS to use libfdt |
| |
| Updated the MPC8540 ADS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5ce715802f6c50dc78b3405b92f184b1e3710519 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 22:40:31 2007 -0600 |
| |
| Update MPC8560 ADS to use libfdt |
| |
| Updated the MPC8560 ADS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit aafeefbdb8b029f5ca2a195598d0a501a606eea9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 00:36:33 2007 -0600 |
| |
| Stop using immap_t for cpm offset on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers |
| instead of getting it via &immap->im_cpm. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f59b55a5b8fcadaa99781ba48e7a38e956afa527 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 23:25:02 2007 -0600 |
| |
| Stop using immap_t for guts offset on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers |
| instead of getting it via &immap->im_gur. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 50c03c8cf494d91cdec39670d95337c743e16ec9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 22:42:34 2007 -0600 |
| |
| Update MPC8544 DS config |
| |
| * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2 |
| * Removed some misc environment setup |
| * Moved to using fdtfile & fdtaddr as fdt env var names |
| * Enabled CONFIG_CMDLINE_EDITING |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit addce57e2e4c49e77ffb2020a84690713bb18b47 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 17:12:24 2007 -0600 |
| |
| Update MPC8544DS to use libfdt |
| |
| Updated the MPC8544DS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 00:15:30 2007 -0600 |
| |
| Add libfdt based ft_cpu_setup for mpc85xx |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 11 13:38:19 2007 +0100 |
| |
| ppc4xx: Correct GPIO offset in gpio_config() |
| |
| Thanks to Gary Jennejohn for pointing this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8809a2713b1ceaf3da55d9d785470294f15de06a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 11 11:46:01 2007 +0100 |
| |
| rtc: Fix merging problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 8 14:47:34 2007 +0100 |
| |
| ppc4xx: 405EX: Correctly enable USB pins |
| |
| This patch selects the USB data pins in the 405EX GPIO and MFC (multi |
| function control) registers. This is done for the AMCC Kilauea and |
| Makalu eval boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 8 08:25:09 2007 +0100 |
| |
| CFI: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Fri Dec 7 23:35:02 2007 +0100 |
| |
| CFI: support JEDEC flash roms in CFI-flash framework |
| |
| The following patch adds support for non-CFI flash ROMS, by hooking into the |
| CFI flash code and using most of its code, as recently discussed here in the |
| thread "Mixing CFI and non-CFI flashs". |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c01b17dd856fa120b2970f50d9598546a4927ec3 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Nov 28 21:24:50 2007 -0500 |
| |
| Conditionally compile fdt_fixup_ethernet() |
| |
| Fix compiler warnings: On boards that don't have ethernets defined, |
| don't compile fdt_fixup_ethernet(). |
| |
| commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 21:59:46 2007 -0600 |
| |
| Convert boards that set memory node to use fdt_fixup_memory() |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 17:06:15 2007 -0600 |
| |
| Added fdt_fixup_stdout that uses aliases to set linux,stdout-path |
| |
| We use a combination of the serialN alias and CONFIG_CONS_INDEX to |
| determine which serial alias we should set linux,stdout-path to. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 14:57:45 2007 -0600 |
| |
| Add common memory fixup function |
| |
| Add the function fdt_fixup_memory() to fixup the /memory node of the fdt |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 11:19:12 2007 -0600 |
| |
| Conditionally compile fdt_support.c |
| |
| Modify common/Makefile to conditionally compile fdt_support.c based |
| on CONFIG_OF_LIBFDT. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d88e7ba0980773479e1a64badb293116071b7ef0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 10:41:40 2007 -0600 |
| |
| Fix build breakage due to libfdt import |
| |
| The IDS8247 got lost in the update and need an API update |
| do to rename of functions in libfdt. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Nov 23 19:43:20 2007 -0500 |
| |
| Add spaces around the = in the fdt print format. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 29592ecba3b932b9b152bcec6c0c0806412db4a3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Dec 7 01:25:38 2007 +0900 |
| |
| sh: Moved driver of the SuperH dependence |
| |
| The composition of the directory in the drivers/ changed. |
| I moved SuperH serial driver and marubun PCMCIA driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 6 10:21:19 2007 +0100 |
| |
| Release v1.3.1 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 6 10:21:03 2007 +0100 |
| |
| ADS5121 Board: fix compile problem. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a27044b14a9e93678a82d7b35f202b93e7687abc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 6 05:58:43 2007 +0100 |
| |
| ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards |
| |
| This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by |
| setting the FIXD bit in the SDR0_MFR register. Here a description of the |
| symptoms: |
| |
| Problem Description |
| ------------------------------ |
| If a DMA is performed between memory and PCI with the DMA 1 Controller |
| using prefetch, and as a result uses a special purpose buffer selected by |
| the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29), |
| the first part of the transfer sequence is performed twice. The |
| PPC440SPe PCI Controller requests more data than was needed such that in |
| the case of enforce memory protection, a host CPU exception can occur. |
| No data is corrupted, because data transfer is stopped in the PCI |
| Controller. Prefetch enable is specified by setting DMA Configuration |
| Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0. |
| |
| Behavior that may be observed in a running system |
| --------------------------------------------------------------------------- |
| |
| 1. DMA performance is decreased because of the double access on the PCI bus |
| interface. |
| 2. If an illegal access to some address on the PCI bus is detected at the |
| system level, a machine check or similar system error may occur. |
| |
| Workarounds Available |
| ---------------------------------- |
| |
| 1. Do not program prefetch. Note that a prefetch command cannot be programmed |
| without selecting a special purpose buffer. |
| 2. To avoid crossing a physical boundary of the PCI slave device, add 512 |
| bytes of address to the PCI address range. |
| |
| This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com> |
| from AMCC and slighly changed. |
| |
| Signed-off-by: Pravin M. Bathija <pbathija@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 4 16:29:48 2007 +0100 |
| |
| ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Dec 3 00:15:28 2007 +0100 |
| |
| Prepare for 1.3.1-rc1 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e15e33433e7c05111968dc9b434a52fd42cbd221 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 30 07:15:41 2007 +0100 |
| |
| ppc4xx: Kilauea: Add PCIe reset assertion upon power-up |
| |
| This manual PCIe reset triggering solves the problem seen with the |
| Intel EPRO/1000 card, which was not detected (link not established) |
| upon power-up reset. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 260eea5676ca46903a335686cc020b29c4ca46fe |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Nov 29 01:21:54 2007 +0900 |
| |
| sh: Add SuperH boards maintainer to MAINTAINERS file |
| |
| Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Nov 29 00:13:04 2007 +0900 |
| |
| sh: Add ms7750se support in MAKEALL |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c7144373427a178332bf9754131c8c34c52c200a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 27 09:44:53 2007 +0100 |
| |
| sh: Add sh3 and sh4 support in MAKEALL |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 130080874a3d28450098481a262c5f7c855e908d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:51:17 2007 +0900 |
| |
| sh: Add document for SuperH. |
| |
| This document is a summary of information concerning SuperH of U-Boot. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:39:31 2007 +0900 |
| |
| sh: Add marubun's pcmcia driver |
| |
| Marubun pcmcia is a chip for PCMCIA used with SuperH. |
| Of course, this can be used even by other architectures. |
| When use this driver, came to be able to use CompactFlash |
| and Ethernet. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit febd86b969b975289ed948f1ac0eb9722da41ced |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:32:13 2007 +0900 |
| |
| sh: Update SuperH SCIF driver |
| |
| - Changed volatile unsigned to vu_. |
| - Changed Makefile for kconfig. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 8be760903645af09871be50ad0a6f9ebb62b311d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 27 11:57:35 2007 +0100 |
| |
| ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing |
| |
| After an error in the AMCC 405EX users manual now correctly configure |
| IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ |
| usage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 26 19:18:21 2007 +0100 |
| |
| Cleanup coding style; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 22:39:25 2007 +0100 |
| |
| MAKEALL: add missing 512x boards in ppc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a340c325e668ca7386c2276387681720be9c3757 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 18:45:47 2007 +0100 |
| |
| Makefile : fix tags ctags etags with new drivers organization |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 26 15:06:14 2007 +0100 |
| |
| ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage |
| |
| As suggested by Senao, use a different EBC_PB0AP setup for 400MHz |
| operation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ca1ce226287270bb01e25b8e3674c701f12edf19 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 26 15:01:45 2007 +0100 |
| |
| ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 18:45:47 2007 +0100 |
| |
| Makefile : fix tags ctags etags with new drivers organization |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 59829cc189378c142c13d2aa8d9a897d8bef3961 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:26:56 2007 +0100 |
| |
| drivers/mtd : move mtd drivers to drivers/mtd |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 318c0b90431f2648552e5ade78833f42652ce859 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:17:55 2007 +0100 |
| |
| drivers/misc : move misc drivers to drivers/misc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 33daf5b7858807cb4ce4158c2c56524671c14c08 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:13:59 2007 +0100 |
| |
| drivers/block : move block drivers to drivers/block |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0c698dcaa70275eb8814f665b545547cee013892 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 20:59:50 2007 +0100 |
| |
| drivers/rtc : move rtc drivers to drivers/rtc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f868cc5a50757d94f36c312395481cb0f187d9e6 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 20:14:44 2007 +0100 |
| |
| drivers/hwmon : move hardware monitor drviers to drivers/hwmon |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 16b195c82a18cbfd164800f17a1ef9db2e48331a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:46:45 2007 +0100 |
| |
| drivers/input : move input drivers to drivers/input |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e4558666293364fc3af1c1d9381ca933fa0f1275 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:40:11 2007 +0100 |
| |
| drivers/usb : move usb drivers to drivers/usb |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1378df792a7ff3abd1bf54a63f5475784f5b083c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:33:38 2007 +0100 |
| |
| drivers/serial : move serial drivers to drivers/serial |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2439e4bfa111babf4bc07ba20efbf3e36036813e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 21 21:19:24 2007 +0100 |
| |
| drivers/net : move net drivers to drivers/net |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 352d259130b349fe9593b8dada641bd78a9659e5 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:41:48 2007 +0100 |
| |
| drivers/video : move video drivers to drivers/video |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 73646217186aa17afc8e305c5f06f06dd335eaad |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:33:09 2007 +0100 |
| |
| drivers/pcmcia : move pcmcia drivers to drivers/pcmcia |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:28:09 2007 +0100 |
| |
| drivers/pci : move pci drivers to drivers/pci |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9162352817579840d7802da6d85872b3ca003c97 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu Nov 22 17:23:23 2007 -0500 |
| |
| Fix fdt printing for updated libfdt |
| |
| Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 13:30:15 2007 -0600 |
| |
| Add additional fdt fixup helper functions |
| |
| Added the following fdt fixup helpers: |
| * do_fixup_by_prop{_u32} - Find matching nodes by property name/value |
| * do_fixup_by_compat{_u32} - Find matching nodes by compat |
| |
| The _u32 variants work the same only the property they are setting |
| is know to be a 32-bit integer instead of a byte buffer. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ab544633abdd14f4dd5d92e500b73eb59ef57e67 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 11:11:03 2007 -0600 |
| |
| Add fdt_fixup_ethernet helper to set mac addresses |
| |
| Added a fixup helper that uses aliases to set mac addresses |
| in the device tree based on the bd_t |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit dbaf07ce620aab249e3502b20a986234a6af1d3a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 14:07:46 2007 -0600 |
| |
| Fix warnings from import of libfdt |
| |
| cmd_fdt.c: In function fdt_print: |
| cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8d04f02f6224e6983f4812ea4da704950ec8539c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 24 11:04:22 2007 -0500 |
| |
| Update libfdt from device tree compiler (dtc) |
| |
| Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from |
| the device tree compiler (dtc) project. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e93becf80d732b64aef81b23e8b6ece02c40533d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Sat Nov 3 19:46:28 2007 -0500 |
| |
| Move do_fixup* for libfdt into common code |
| |
| Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 |
| into common/fdt_support.c and renamed: |
| |
| do_fixup() -> do_fixup_by_path() |
| do_fixup_u32() -> do_fixup_by_path_u32() |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f738b4a75998f42a7408defadc9baac7a31c92db |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 25 16:15:07 2007 -0500 |
| |
| Make no options to fdt print default to '/' |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 24 10:21:57 2007 -0500 |
| |
| Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt |
| |
| Removed: |
| fdt_node_is_compatible |
| fdt_find_node_by_type |
| fdt_find_compatible_node |
| |
| To ease merge of newer libfdt as we aren't using them anywhere at this time. |
| |
| Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same |
| reason. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 98e2867cc85409b919f862e6c16026461ec955df |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Nov 21 09:19:37 2007 -0700 |
| |
| [BUILD] Remove libraries when updating autoconf.mk |
| |
| Fix library problems caused by conditional compilation. Using |
| autoconf.mk to decide which files to compile has caused a problem when |
| changing configuration from one board to another without clearing out |
| the library (*.a) files. |
| |
| It used to be that the linker was always passed the same list of .o |
| files when building the .a files. However, that is not longer true |
| with conditional compilation. Now, a different board config will have |
| a different file list passed to the linker. The problem occurs when |
| a library has already been built and the board config is changed. |
| |
| Since the linker will update instead of replace a preexisting library, |
| then if the file list changes to remove some object files the old |
| objects will still exist in the library. |
| |
| The solution is to remove all old library files when autoconf.mk is |
| made. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit ed1353d74b9ce8a7fcd660570b848a184d614b5f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 08:49:50 2007 -0600 |
| |
| [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile |
| |
| Modify libfdt/Makefile to conditionally compile the *.c files based |
| on the board config. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4a43719a7738712811d822ca8125427b27a55cdc |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| [BUILD] conditionally compile common/cmd_*.c in common/Makefile |
| |
| Modify common/Makefile to conditionally compile the cmd_*.c files based |
| on the board config. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| [BUILD] Generate include/autoconf.mk from board config files |
| |
| Use cpp and sed to postprocess config.h and import the defined values |
| into include/autoconf.mk. autoconf.mk is then included by config.mk to |
| give 'make' access to the board configuration. |
| |
| Doing this enables conditional compilation at the Makefile level instead |
| of by wrapping every .c file with #ifdef/#endif wrappers. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 68b88999da87ab88e71e1306192905be3450198e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Nov 20 15:02:26 2007 -0600 |
| |
| 8610HPCD: Enable the 8610 Display Interface Unit |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 74f89faa9d1e77ed947e628d3effaa513fe05d05 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Nov 20 15:00:53 2007 -0600 |
| |
| Move 8610 DIU interface structure definitions to header file. |
| |
| These two structures are still needed during the |
| initialization and setup of the DIU hardware. |
| So move them to the fsl_diu_fb.h file for now. |
| Official "blah". |
| |
| Noticed-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 080c646dbf474a109c3f85718fb01ce042a38c45 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:14:18 2007 +0100 |
| |
| drivers/i2c : move i2c drivers to drivers/i2c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9a337ddc154a10a26f117fd147b009abcdeba75a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 19 22:20:24 2007 +0100 |
| |
| Prepare for 1.3.0 release. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f30ad49b16bf998b03c1a5228b6c86369d61c258 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Mon Nov 19 10:02:13 2007 -0500 |
| |
| Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS |
| |
| CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit f8c320609366176b31104d9bf5e295232e1c7f1d |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Mon Nov 19 11:14:16 2007 +0900 |
| |
| [MIPS] board/gth2/lowlevel_init.S: Fix a build warning |
| |
| lowlevel_init.S: Assembler messages: |
| lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local. |
| |
| Looking at codes, the `memtest' and `clearmem' are intentional mixed |
| use of `global symbols' and `label' for debugging purpose. To make it |
| build, just disable global-symbols-use for now. As a result `memtest' |
| still remains as unused, but leave it be... |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 19 12:59:14 2007 +0100 |
| |
| Fix build problems with mp2usb board |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6bf4c686afca1e86e1c384d59218f914605713bf |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 18 18:36:11 2007 +0100 |
| |
| s3c24x0: Fix usb_ohci.c missing in Makefile |
| and usb_ohci.c warning differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6073f61e078da5ddb521b56256bcc36508589883 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 18 12:55:02 2007 +0100 |
| |
| pb1x00 board: Fix u16 status declaration when PCMCIA is defined |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8412d814ce8bf5570a2b747f1e7fd321097fe987 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Nov 18 17:11:09 2007 +0100 |
| |
| Fix compiler warnings for ARM systems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Nov 18 16:36:27 2007 +0100 |
| |
| Fix compiler warnings for PPC systems. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 653811a3c2b35856bf12e196dcc8c4694e28e420 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Nov 18 14:44:44 2007 +0100 |
| |
| ppc4xx: Correct 405EX PCIe UTL register mapping |
| |
| Map 4k mem space for UTL registers for each port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 079c2c4fa71c0d1ebef394508df9088df8a308d3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 17 11:31:10 2007 +0100 |
| |
| Fix warning differ in signedness in net/net.c and net/nfs.c |
| |
| commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:42:45 2007 +0900 |
| |
| gth2.c: Fix a warning on gth2 build. |
| |
| gth2.c: In function 'misc_init_r': |
| gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2309c130aa4c84b91bd874a41269c923eb61b555 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 17 07:58:25 2007 +0100 |
| |
| Fix warning differ in signedness in common/cmd_scsi.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ea61b57968554eaf0f474ec7e088b17d367f474 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 17 14:52:29 2007 +0100 |
| |
| ppc4xx: Update AMCC Kilauea config file |
| |
| - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:26 2007 +0900 |
| |
| [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker |
| |
| Current trick to pick up GNU assembler minor version does not work with the |
| latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to |
| "(GNU Binutils) ". |
| |
| $ sde-as --version |grep "GNU assembler" |
| GNU assembler 2.15.94 mipssde-6.02.02-20050602 |
| $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |
| 2.15.94 |
| $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' |
| 15 |
| $ |
| |
| $ mips-linux-as --version |grep "GNU assembler" |
| GNU assembler (GNU Binutils) 2.18 |
| $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |
| (GNU |
| $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' |
| (no output) |
| $ |
| |
| As a result of above, you'll see many noises with such binutils: |
| |
| make -C cpu/mips/ |
| /bin/sh: line 0: [: : integer expression expected |
| /bin/sh: line 0: [: : integer expression expected |
| make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips' |
| mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S |
| /bin/sh: line 0: [: : integer expression expected |
| mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S |
| /bin/sh: line 0: [: : integer expression expected |
| mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c |
| /bin/sh: line 0: [: : integer expression expected |
| |
| This patch simplifies the trick and makes it work with both versions of gas. |
| I also replace an expensive `awk (or gawk)' with `cut'. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 16664f72850846e645616da1c0fa5afcd6d15f15 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:26 2007 +0900 |
| |
| [MIPS] Remove useless instructions for initializing $gp. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 03c031d5660ea946c39af6e2e16267da857c609f |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:27:06 2007 +0900 |
| |
| [MIPS] MIPS 4K core: Coding style cleanups |
| |
| No logical changes. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit f5e429d3860bba4c6ae8bead8f78349fa24491b2 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:20 2007 +0900 |
| |
| [MIPS] gth2.c: Fix a warning on gth2 build. |
| |
| gth2.c: In function 'misc_init_r': |
| gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 4fbd0741b2b6441da10be93e10267122581b7079 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:22:33 2007 +0900 |
| |
| [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build. |
| |
| au1x00_eth.c: In function 'au1x00_miiphy_write': |
| au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit f01320459736f156707425cf8112f98606301aa4 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:25 2007 +0900 |
| |
| [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error |
| |
| au1x00_eth.c: In function 'au1x00_enet_initialize': |
| au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function) |
| au1x00_eth.c:246: error: (Each undeclared identifier is reported only once |
| au1x00_eth.c:246: error: for each function it appears in.) |
| au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function) |
| au1x00_eth.c: In function 'au1x00_miiphy_write': |
| au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void |
| make[1]: *** [au1x00_eth.o] Error 1 |
| |
| Fixed by moving these two functions forward. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit b09258c5393edd1087c5f39ae68338f16b49f8b3 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:25 2007 +0900 |
| |
| MAKEALL: Added missing pb1000 board |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:24 2007 +0900 |
| |
| [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:24 2007 +0900 |
| |
| [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end} |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 5947f6999aafa7c54c1390983d264a8463dfea8e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 02:34:38 2007 +0100 |
| |
| Update CHANGELOIG, prepare for -rc4 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5 |
| Author: Luotao Fu <l.fu@pengutronix.de> |
| Date: Wed Nov 14 18:58:33 2007 +0100 |
| |
| Fix the i2c frequency and default address in rsdproto board |
| |
| rsdproto board support has wrong I2C frequency and wrong return value |
| handling. |
| |
| Signed-off-by: Luotao Fu <l.fu@pengutronix.de> |
| |
| commit 429c180edad038f91c989cb14b478228092e7054 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 01:45:38 2007 +0100 |
| |
| powerpc: Backout relocation changes for MPC5121, too. |
| |
| Apply Grant Likely's backout to MPC5121 code, too. |
| |
| Pointed out by Rafal Jaworowski <raj@semihalf.com> |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Nov 13 22:18:33 2007 -0700 |
| |
| powerpc: Backout relocation changes. |
| |
| Ugh. I *hate* to back this change out, but these compiler flags don't |
| work for relocation on all versions of GCC. I've not been able to |
| reproduce the environment in my setup (and hence, not been able to |
| find a combination that *does* work), so I've got no choice but to go |
| back to the old gcc flags and linker script. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5c15010efad980ad5498cc565fc1ed70df2f52b4 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 13 09:11:05 2007 +0100 |
| |
| Fixed mips_io_port_base build errors. |
| |
| This patch has been sent on: |
| - 29 Sep 2007 |
| |
| Although mips_io_port_base is currently a part of IDE command, it is quite |
| fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move |
| it to MIPS general part, and introduce `set_io_port_base()' from Linux. |
| |
| This patch is triggered by multiple definition of `mips_io_port_base' build |
| error on gth2 (and tb0229 also needs this fix.) |
| |
| board/gth2/libgth2.a(gth2.o): In function `log_serial_char': |
| /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' |
| common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here |
| make: *** [u-boot] Error 1 |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 01:30:40 2007 +0100 |
| |
| Fix a bug in the slave serial programming mode for the Xilinx |
| Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if |
| the most significant bit was set, which did not work on any |
| architecture where "char" defaulted to be an unsigned type. |
| |
| Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com> |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d08b7233bc252faad8339e7ca0ddfd62fa79903c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 1 12:23:29 2007 -0500 |
| |
| 86xx: Fix broken variable reference when #def DEBUGing. |
| |
| Sometimes you can't reference the DDR2 controller variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:32:00 2007 +0800 |
| |
| make 8610 board use pixis reset |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| Unify pixis_reset altbank across board families |
| |
| Basically, refactor the CFG_PIXIS_VBOOT_MASK values |
| into the separate board config files. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 64bf555465c7926be13e1046ac0d0f05ac72829c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 7 08:19:21 2007 +0100 |
| |
| Fix warning: pointer targets in assignment differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7a60ee7c6248a958c5757d3660a1702723a2786d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 7 08:19:19 2007 +0100 |
| |
| Fix warning differ in signedness in common/cmd_ide.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 16 14:16:54 2007 +0100 |
| |
| ppc4xx: Enable 405EX PCIe UTL register configuration |
| |
| Till now the UTL registers on 405EX were not initialized but left with |
| their default values. This patch new initializes some of the UTL |
| registers on 405EX. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 16 14:00:59 2007 +0100 |
| |
| ppc4xx: Update AMCC Makalu for board rev 1.1 |
| |
| This patch adds changes needed for Makalu rev 1.1: |
| |
| - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM |
| - Enable 2nd ethernet port EMAC1 |
| - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE) |
| - Reset PCIe ports via GPIO upon bootup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4d4faae65e115e327425cd514c1a35146a85166b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group PCI and PCMCIA drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5798f87dc10a496d79d3177b9f5a76488987fd35 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group block/flash drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit df58c81551700f058b44cacf55a7997fa63bfe0a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group USB drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group i2c drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit ec00c76de0e5971273905998d62d6bb119324218 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group console drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 754f230aa01b8c789fc31f8013c2487954073300 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group network drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f0037c56b0d12cd46215124667b9f83d60ef9391 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Build: split COBJS value into multiple lines |
| |
| This change is in preparation for condtitionial compile support in the |
| build system. By spliting them all into seperate lines now, subsequent |
| patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will |
| be less invasive and easier to review |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Add .gitignore files |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 955413f35f054a82e40042f1dbcf501c6a05719b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:27:52 2007 -0700 |
| |
| Revert "Correct relocation fixup for mpc5xx" |
| |
| This reverts commit 3649cd99ba815b6601868735765602f00ef3692b. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit e15633888a058aacb31a62d2cf1278e1e4c236ab |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:24:32 2007 -0700 |
| |
| Revert "Correct fixup relocation for MPC5xxx" |
| |
| This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 139365fbe566d0fc619a1ed04452ec5388f0cef8 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:21:04 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc8220" |
| |
| This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 70922342369e5e39b286fe21e768a239ca07a514 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:57 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc824x" |
| |
| This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:50 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc8260" |
| |
| This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:43 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc83xx" |
| |
| This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c93945e8f9e300860d2bf73a2549ce5794f8bd00 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:25 2007 -0700 |
| |
| Revert "[MPC512x] Correct fixup relocation" |
| |
| This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:25:09 2007 +0100 |
| |
| ppc4xx: Small AMCC Kilauea cleanup |
| |
| Remove not needed pci_target_init() function. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aee747f19b460a0e9da20ff21e90fdaac1cec359 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:23:55 2007 +0100 |
| |
| ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms |
| |
| - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE |
| - Cleanup of the 4xx GPIO functions |
| - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8ada0ebf38e4073beea0309188b25d82a112a2ae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:20:08 2007 +0100 |
| |
| ppc4xx: AMCC Taihu board config file cleanup |
| |
| This patch makes the AMCC Taihu a little more compatible to the other |
| AMCC eval boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5e71c51d74c963d3174060c078dcacf13bdd02ef |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:37:28 2007 +0100 |
| |
| [INKA4x0] NG hardware: flash support |
| |
| Disabled and remove inka4x0 custom flash driver, use CFI flash |
| driver instead. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5fb6d7191e206cdde0e23140fd8111caed93a595 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:29:55 2007 +0100 |
| |
| [INKA4x0] NG hardware: SDRAM support |
| |
| Add support for three new DDR chips that may be present on a NG |
| INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT. |
| |
| Cleanup board/inka4x0/mt48lc16m16a2-75.h file. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f23cb34c367bb27585a4fdb8a75277370e7d0596 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:24:43 2007 +0100 |
| |
| [INKA4x0] NG hardware: platform code update |
| |
| - Cleanup compile warnings. |
| - Add missing '\0' in default environment. |
| - Increase CFG_MONITOR_LEN to 256 KiB. |
| - Add required CFG_USE_PPCENV. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2ae64f5135e51bb18753884d1265b99e89b5aedd |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Thu Nov 15 08:58:00 2007 +0000 |
| |
| Remove warnings re CONFIG_EXTRA_ENV_SETTINGS |
| Remove warnings re onenand_read() & write() |
| |
| commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Thu Nov 15 08:45:13 2007 +0000 |
| |
| Correction patch |
| |
| commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Thu Sep 13 18:52:28 2007 +0800 |
| |
| Enable ULi1575 Ethernet support in 8610HPCD config |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 54fd6c93c28a0a45352fff5dd92673401ff563f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 13 08:18:20 2007 +0100 |
| |
| ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 13 08:06:11 2007 +0100 |
| |
| ppc4xx: Fix 405EX PCIe UTLSET register setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1ce55151c85d068f70317a8d65c61058b891afb4 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Tue Nov 13 07:50:29 2007 +0100 |
| |
| [UC101] SRAM now with 2 MB working. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2d14684341109a69616e4d6016cd61402d55086f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:37:53 2007 +0100 |
| |
| ppc4xx: Use generic usb-ohci driver for sequoia board |
| |
| This patch makes the sequoia board use the generic usb-ohci driver |
| instead of cpu/ppc4xx/usb_ohci.c. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9be659ac0868dc367caa957c5c725e46b07f6a5f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:37:23 2007 +0100 |
| |
| ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined |
| |
| This patch disables the 44x d-cache on 'usb start' and |
| reenables it on 'usb stop'. This should be seen as a |
| temporary fix until the generic usb-ohci driver can |
| life with d-cache enabled. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:36:44 2007 +0100 |
| |
| ppc4xx: Remove redundant code from 4xx network driver |
| |
| This patch removes some redundant code and decrements the end |
| address of cache flush and invalidate by 1. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5ca9881aad8c413ac2a82868a5e3719178254502 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri Nov 9 15:24:26 2007 +0000 |
| |
| Add apollon board support |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit b53313dbfc74525d85f1e7e0102f902d5c863beb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 9 12:19:58 2007 +0100 |
| |
| ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c7f69c340277935a6c19a956421852da944a365f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 9 12:18:54 2007 +0100 |
| |
| ppc4xx: Make output a little shorter on I2C bootrom detection |
| |
| Most 4xx PPC capable of using an I2C bootrom for bootstrap setting |
| already print a line with the information which I2C bootrom is |
| used for bootstrap configuration. So we don't need this extra line |
| with "I2C boot EEPROM en-/dis-abled". |
| |
| This patch also has a little code cleanup integrated. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8d737a28152ec12873f8544cca1fb39a49e5e693 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:50:18 2007 -0600 |
| |
| ColdFire: MCF5329 - Remove reset registers from CCM |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:31:11 2007 -0600 |
| |
| ColdFire: MCF5329 - Add Reset structure to immap_5329.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:19:01 2007 -0600 |
| |
| ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 225a24b5e062ad94627424508ae814f51dbe1a34 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 18:00:54 2007 -0600 |
| |
| ColdFire: MCF5445x - Update correct RAMBAR and missing linker files |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 248c7c14835f34d5d910b45e5600050e58ca6cab |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 17:56:15 2007 -0600 |
| |
| ColdFire: MCF532x - Update do_reset() using core reset |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 17:51:00 2007 -0600 |
| |
| ColdFire: Update cpu flag for 4.2-xx compiler |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 070ba56115b4da63b46e974287fa4550d4023386 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Wed Oct 31 14:59:04 2007 -0500 |
| |
| 8610: Add console frame buffer support to FSL 8610 DIU driver. |
| |
| Add cfb console support to FSL 8610 DIU driver. |
| Inspect board version from PIXIS to obtain correct pixel format. |
| |
| Use #define CONFIG_VIDEO in config file to enable fb console. |
| |
| To switch monitor, set monitor variable to |
| 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS |
| followed by "diufb init". |
| |
| Preserve logo bitmap at the top of the fb console. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a877880c6949e948bd63cd6ea4e216573d2f53dd |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon Oct 29 13:58:39 2007 -0500 |
| |
| 8610: Add 8610 DIU display driver |
| |
| 1280x1024 and 1024x768 @ 32 bpp are supported now. |
| DVI, Single-link LVDS, Double-link LVDS are all supported. |
| |
| Environmental variable "monitor" is used to specify monitor port. |
| |
| A new command "diufb" is introduced to reinitialize monitor |
| and display a BMP file in the memory. So far, 1-bit, 4-bit, |
| 8-bit and 24-bit BMP formats are supported. |
| |
| diufb init |
| - initialize the diu driver |
| Enable the port specified in the environmental variable "monitor" |
| |
| diufb addr |
| - display bmp file in memory. |
| The bmp image should be no bigger than the resolution, 1280x1024 |
| for DVI and double-link LVDS, 1024x768 for single-link LVDS. |
| |
| Note, this driver allocate memory but doesn't free it after use |
| It is written on purpose -- to avoid a failure of reallocation |
| due to memory fragement. |
| |
| ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon loeliger <jdl@freescale.com> |
| |
| commit 52e5ddfecdda308f75782fae206b677b1810f5f9 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Wed Oct 31 10:43:59 2007 -0500 |
| |
| FSL: Add a freescale bitmap logo. |
| |
| This Freescale logo is a 340 x 128 x 4bpp BMP file |
| that can be displayed by the DIU Framebuffer driver. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1815338fbd1c0f94f8276d2891b99caa5a05f622 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon Oct 29 13:57:53 2007 -0500 |
| |
| 8610: Make some extra debug environment variables conditional. |
| |
| One may #define ENV_DEBUG to get them back again. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit 761421ccca80a9fb37b19c37aa61d46ef75e0647 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| 8610: Actually enable pixis_reset CONFIGs |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit f3bceaab230b4748d0afc4109b6837308f018b40 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:31:59 2007 +0800 |
| |
| Fix the BAT definition of PCI IO on 8610 board |
| |
| The address in the BAT register is aligned with the BAT size. |
| The original definition actually did not define BAT for PCIE2 IO. |
| This patch fix this. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| Unify pixis_reset altbank across board families |
| |
| Basically, refactor the CFG_PIXIS_VBOOT_MASK values |
| into the separate board config files. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:32:00 2007 +0800 |
| |
| make 8610 board use pixis reset |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 9c84709eedce9c680dd695984ab7d2328f4f04f5 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 1 12:23:29 2007 -0500 |
| |
| 86xx: Fix broken variable reference when #def DEBUGing. |
| |
| Sometimes you can't reference the DDR2 controller variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58 |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Mon Nov 5 17:39:24 2007 +0800 |
| |
| Implement general ULi 526x Ethernet driver support in U-boot |
| |
| This patch implements general ULi 526x Ethernet driver. |
| Until now, it is the only native Ethernet port on |
| MPC8610HPCD board, but it could be used on other boards |
| with ULi 526x Ethernet port as well. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Nov 1 08:46:50 2007 -0500 |
| |
| NET: Add Ethernet 1000BASE-X support for PPC4xx |
| |
| This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and |
| "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which |
| returns non-zero iff the PHY registers are configured for 1000BASE-X. The |
| "mii info" command is modified to distinguish between 1000BASE-T and -X. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 298035df4948b113d29ac0e694717d34b95bc5dc |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Wed Oct 31 11:21:29 2007 -0500 |
| |
| NET: Cosmetic changes |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 654f38b3a387886996a5a75771fbfc29cb4f225e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 5 07:43:05 2007 +0100 |
| |
| ppc4xx: Make output a little shorter on PCIe detection |
| |
| Now not max 3 lines but 2 lines are printed per PCIe port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 992742a5b09d9040adbd156fb90756af66ade310 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 3 23:09:27 2007 +0100 |
| |
| Cleanup coding style; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e881cb563e32f45832b7b6db77bdcd017adcbb41 |
| Author: Bruce Adler <bruce.adler@ccpu.com> |
| Date: Fri Nov 2 13:15:42 2007 -0700 |
| |
| fix wording in README |
| |
| Changed the wording to properly describe the shadowing |
| of the environment from ROM to RAM |
| |
| Signed-off-by: Bruce Adler <bruce.adler@acm.org> |
| |
| commit ad845beef06245426c57b53dcdc01b7dc70e0d45 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Wed Oct 31 02:18:15 2007 +0900 |
| |
| blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit ec22755799466c8a103664bb3a5e647bf9c238f4 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Thu Oct 25 16:08:14 2007 +0300 |
| |
| Trimmed some variables in ne2000.c |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:51:27 2007 +0800 |
| |
| Fix the issue of usb_kbd driver missing the scan code of key 'z'. |
| |
| The scan code of the key 'z' is 0x1d, which should be handled. |
| |
| The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI |
| controller. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit bbf4796f6498fbade56d56eff3a0a49b299d93e5 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:30:04 2007 +0800 |
| |
| Fix USB support issue for MPC8641HPCN board. |
| |
| The configuration file has already enabled USB, but it |
| missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB |
| on MPC8641HPCN can not work because of the wrong USB |
| register endian. |
| |
| And add the USB command to U-Boot commands list. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 4e62041023dc3de9d98d977bb080235bc6d035e0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Oct 24 18:16:01 2007 +0200 |
| |
| Use config_cmd_default.h instead of config_cmd_all.h |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 56622f87857439b1c221e9deef11a9d5bb5d4308 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Oct 24 01:37:36 2007 +0200 |
| |
| TQM5200: Call usb_cpu_init() during board init |
| |
| usb_cpu_init() configures GPS USB pins, clocks, etc. and |
| is required for proper operation of kernel USB subsystem. |
| This setup was previously done in the kernel by the fixup |
| code which is being removed, thus low level init must be |
| done by U-boot now. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Oct 23 16:25:50 2007 +0200 |
| |
| Fix typo in nfs.c |
| |
| An obvious typo. Originally fixed in linkstation u-boot port. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Oct 23 14:35:05 2007 +0200 |
| |
| Fix a typo in cpu/mpc824x/interrupts.c |
| |
| Since December 2003 the timer_interrupt_cpu() function in |
| cpu/mpc824x/interrupts.c contains what seems to be a superfluous |
| parameter. Remove it. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d |
| Author: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| Date: Wed Oct 17 11:13:51 2007 +0200 |
| |
| add ft_cpu_setup(..) on mpc8260 |
| |
| Add ft_cpu_setup(..)-function to adapt it for use with libfdt |
| based on code from mpc5xxx |
| |
| Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| -- |
| |
| commit 6abd82e19ae93c0b4d104e50165e235915ec0875 |
| Author: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| Date: Wed Oct 17 11:18:42 2007 +0200 |
| |
| changes for IDS8247 board support |
| |
| To get the IDS8247 board working following are done: |
| - FCC2 is deactivated |
| - FCC1 is activated |
| - I2C is activated |
| - CFI driver is activated |
| - Adapted for use with LIBFDT |
| |
| Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| -- |
| |
| commit 3d6cb3b24add6415f86a0f013ea40f5639b90047 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 3 12:08:28 2007 +0100 |
| |
| ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support |
| |
| This patch adds NAND booting support for the AMCC 405EX(r) eval boards. |
| Again, only one image supports both targets. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Oct 24 15:48:37 2007 +0200 |
| |
| ATSTK1002: Remove default ethernet addresses |
| |
| Wolfgang is right: It's not a good idea to set up default initial |
| ethernet addresses for a board, even though they belong to the local |
| range. |
| |
| This will change the failure mode from "IT manager screams at you for |
| using duplicate ethernet addresses" to a nice error message explaining |
| that the ethernet address hasn't been set properly. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit e5c794e491a57d829b6d8733e2ed8368a2269abf |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:40:35 2007 -0400 |
| |
| DHCP Client Fix |
| |
| This is a multi-part message in MIME format. |
| |
| commit e6e505eae94ed721e123e177489291fc4544b7b8 |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:19:03 2007 -0400 |
| |
| Found a bug in the way the DHCP Request packet is built, where the IP address |
| that is offered by the server is bound to prematurely. This patch is a fix of |
| that bug where the IP address offered by the DHCP server is not used until |
| after the DHCP ACK from the server is received. |
| |
| Signed-off-by: Justin Flammia <jflammia@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 5d96d40d3f36da33348e68f9ea993f383e11f997 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:58:34 2007 +0100 |
| |
| ppc4xx: Fix acadia_nand build problem |
| |
| Since the cache handling functions were moved from start.S into cache.S |
| the acadia NAND booting Makfile needs to be adapted accordingly. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:57:11 2007 +0100 |
| |
| ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM |
| |
| This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files |
| and to the Sequoia TLB init code. Now the cache can be enabled on 44x |
| boards by defining CONFIG_4xx_DCACHE in the board config file. This |
| option will disappear, when more boards use is successfully and no |
| more known problems exist. |
| |
| This is tested successfully on Sequoia and Katmai. The only problem that |
| needs to be fixed is, that USB is not working on Sequoia right now, since |
| it will need some cache handling code too, similar to the 4xx EMAC driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:51:10 2007 +0100 |
| |
| ppc4xx: Enable CPU POST test for 4xx with dcache enabled |
| |
| Now with caches enabled (i- and d-cache) on 44x, we need a chance to |
| disable the cache for the CPU POST tests, since these tests consist |
| of self modifying code. This is done via the new change_tlb() function. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f71b2888b4b3c870909a0341427b2a914246f81f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:47:26 2007 +0100 |
| |
| ppc4xx: Change 4xx POST ethernet test to handle cached memory too |
| |
| This patch enables the 4xx EMAC POST driver to work too, when dcache is |
| enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a2685904061b35a17583d65fe47cdc2686a69eaa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:45:53 2007 +0100 |
| |
| ppc4xx: Remove temporary TLB entry in POST cache test only for 440 |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ff768cb168d8157c24a25016dbfbeb465e47f420 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 18:01:24 2007 +0100 |
| |
| ppc4xx: Change 4xx ethernet driver to handle cached memory too |
| |
| This patch enables the 4xx EMAC driver to work too, when dcache is |
| enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 483e09a223c666269ef81d3573a6591b1046b0ef |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:59:22 2007 +0100 |
| |
| ppc4xx: Add change_tlb function to modify I attribute of TLB(s) |
| |
| This function is used to either turn cache on or off in a specific |
| memory area. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:57:52 2007 +0100 |
| |
| ppc4xx: Remove cache definition from 4xx board config files |
| |
| All 4xx board config files don't need the cache definitions anymore. |
| These are now defined in common headers. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9b94ac61d2176185c30adf0793e079ec30e68687 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:55:58 2007 +0100 |
| |
| ppc4xx: Rework 4xx cache support |
| |
| New cache handling functions added and all existing functions |
| moved from start.S into seperate cache.S. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 06713773da4ac3d390c63d82641eb553224b27c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 18:03:12 2007 +0200 |
| |
| ppc4xx: Remove compiler warning from previous commit |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:40:30 2007 +0200 |
| |
| ppc4xx: Remove temporary TLB entry in POST cache test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1338e6a81834099ba19733b69aafd8ef5f098094 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:05:08 2007 +0200 |
| |
| ppc4xx: Change autonegotiation timeout from 4 to 5 seconds |
| |
| I lately noticed, that newer 4xx board with GBit support sometimes don't |
| finish link autonegotiation in 4 seconds. Changing this timeout to 5 |
| seconds seems fine here. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:03:17 2007 +0200 |
| |
| ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends |
| |
| This patch changes all in32/out32 calls to use the recommended in_be32/ |
| out_be32 macros instead. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 25 12:24:59 2007 +0200 |
| |
| ppc4xx: Fix POST ethernet test for Haleakala |
| |
| The POST ethernet test needed to be changed to dynamically determine |
| the count of ethernet devices. This code is cloned from the 4xx |
| ethernet driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 11:31:05 2007 +0200 |
| |
| ppc4xx: Correct UART input clock calculation and passing to fdt |
| |
| We now use a value in the gd (global data) structure for the UART input |
| frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely |
| in get_sys_info(). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 10:10:08 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support |
| |
| The Haleakala is nearly identical with the Kilauea eval board. The only |
| difference is that the 405EXr only supports one EMAC and one PCIe |
| interface. This patch adds support for the Haleakala board by using |
| the identical image for Kilauea and Haleakala. The distinction is done |
| by comparing the PVR. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9f798766aa85e62eb8fa8c721e148df609b78137 |
| Author: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Date: Tue Oct 23 08:29:10 2007 +0200 |
| |
| ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM |
| |
| This patch also adds a note to the fixed DDR setup for Bamboo NAND booting: |
| |
| Note: |
| As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed |
| DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM |
| modules are still plugged in. So it is recommended to remove the DIMM |
| modules while using the NAND booting code with the fixed SDRAM setup! |
| |
| Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 16:24:44 2007 +0200 |
| |
| ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3248f63ad89cb031491edb7016587fe6e9a238b9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 16:22:40 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (4) |
| |
| Change 4xx_uart.c: |
| |
| - Use in_8/out_8 macros instead of in8/out8 |
| - No need for UART_BASE marco anymore, now really handled via function |
| parameter |
| - serial_init_common() introduced |
| - Further coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e61cb8163a66b8a135696ae232e2bead1ce0a049 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:45:49 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (3) |
| |
| Change all linker scripts to reference the changed driver name iop480_uart.o. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 882ae41274921f9016131806bdeb27e19606f47a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:44:39 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (2) |
| |
| Change all linker scripts to reference the changed driver name 4xx_uart.o. |
| |
| Note: In most cased all these explicit referencing of these object files |
| in the linker scripts is not neccessary. Only for manually embedded |
| environment into the U-Boot image, which is not done is most cases. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ad31e40bed042cb670d0036fea96435007afb838 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:09:59 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (1) |
| |
| This patch starts the rework of the PPC4xx serial driver. First we split |
| the file into two seperate files, one 4xx_uart.c with the 405/440 UART |
| handling code and the other one iop480_uart.c with the UART code for the |
| PLX-Tech IOP480 PPC (PPC403 based). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 764e7417ee5f6e25b1715720e7d7dd3487109385 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 10:30:38 2007 +0200 |
| |
| ppc4xx: Correct UART input clock calculation and passing to fdt |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 07:34:34 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Makalu 405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fa8aea20456e6f1dba43f46bcc72024dd9499998 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 07:33:52 2007 +0200 |
| |
| ppc4xx: Add freqUART to CPU speed detection |
| |
| This value is needed later for the device tree configuration of |
| the uart clock. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 14:26:29 2007 +0200 |
| |
| ppc: Small Kilauea cleanup of config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 758c037aeead34b49631b8da3a90b1bba14c0410 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:16:12 2007 +0200 |
| |
| rtc: Add Xicor/Intersil X1205 RTC support |
| |
| This patch adds support for the Xicor/Intersil X1205 RTC used on the |
| AMCC Makalu eval board. This driver is basically cloned from the Linux |
| driver version (2.6.23). |
| |
| This patch also introduces the Linux bcd.h header for the BCD2BIN/ |
| BIN2BCD conversions. In the future some of the other U-Boot RTC driver |
| should be converted to also use this header instead of implementing |
| their own local copy of these functions/macros. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:12:41 2007 +0200 |
| |
| ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx |
| |
| This patch moves some common 4xx macros and the PPC405_SYS_INFO/ |
| PPC440_SYS_INFO structure into the common ppc4xx.h header. |
| |
| Lot's of other macros are good candidates to be consolidated this way |
| in the future. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 770c7af5800f598d22730d1f4b70f16c9b33512e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:05:18 2007 +0200 |
| |
| ppc4xx: Fix size setup in Kilauea DDR2 init routine |
| |
| The size was initilized wrong. Instead of 256MB, the DDR2 controller |
| was setup to 512MB. Now the correct values is used. |
| |
| This patch also does a little cleanup and adds a comment here. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a |
| Author: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Date: Thu Oct 18 17:29:04 2007 +0200 |
| |
| ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors |
| |
| CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR |
| number is used to access system registers. |
| |
| Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c36c68160333ac5fe41ec3db12a728b7075b3912 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 18 07:42:27 2007 +0200 |
| |
| ppc4xx: Change inbound PCIe location for endpoint tests on Katmai |
| |
| On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which |
| is the internal SRAM. Since I now ported and tested this endpoint mode |
| on Kilauea successfully to map to 0 (SDRAM), I also changed this for |
| Katmai. |
| |
| Yucca will stay at internal SRAM for now. Not sure if somebody relies on |
| this setup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5cb4af4791f61843432155142b6cfac901f66c10 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 18 07:39:38 2007 +0200 |
| |
| ppc4xx: Add PCIe endpoint support on Kilauea (405EX) |
| |
| This patch adds endpoint support for the AMCC Kilauea eval board. It can |
| be tested by connecting a reworked PCIe cable (only 1x lane singles |
| connected) to another root-complex. |
| |
| In this test setup, a 64MB inbound window is configured at BAR0 which maps |
| to 0 on the PLB side. So accessing this BAR0 from the root-complex will |
| access the first 64MB of the SDRAM on the PPC side. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d4cb2d17946466740afeb195a57d6cb290bf4cc0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 13 16:43:23 2007 +0200 |
| |
| ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode |
| |
| This patch adds support for dynamic configuration of PCIe ports for the |
| AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe |
| boards Yucca & Katmai and the 405EX board Kilauea. |
| |
| This dynamic configuration is done via the "pcie_mode" environement |
| variable. This variable can be set to "EP" or "RP" for endpoint or |
| rootpoint mode. Multiple values can be joined via the ":" delimiter. |
| Here an example: |
| |
| pcie_mode=RP:EP:EP |
| |
| This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2 |
| as endpoint. |
| |
| Per default Yucca will be configured as: |
| pcie_mode=RP:EP:EP |
| |
| Per default Katmai will be configured as: |
| pcie_mode=RP:RP:REP |
| |
| Per default Kilauea will be configured as: |
| pcie_mode=RP:RP |
| |
| Signed-off-by: Tirumala R Marri <tmarri@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 11 11:15:59 2007 +0200 |
| |
| ppc4xx: Enable device tree support (fdt) on Kilauea per default |
| |
| This patch enables the fdt support on the AMCC Kilauea eval board. |
| Additionally now EBC ranges fdt fixup is included to support NOR |
| FLASH mapping via the Linux physmap_of driver. |
| |
| This Kilauea port now support booting arch/ppc and arch/powerpc |
| Linux kernels. The default environment "net_nfs" is for arch/ppc |
| and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc |
| support will be removed. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 11 11:11:45 2007 +0200 |
| |
| ppc4xx: Add additional debug info to 4xx fdt support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit db3232ddb058d0ed0bc31f7c5c296748a1afac67 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 21:28:58 2007 +0200 |
| |
| ppc4xx: Fix small merge problems with CPCI440 and Acadia boards |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1941cce71b1ae975602854045061e82f94ecd012 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:35:10 2007 +0200 |
| |
| ppc4xx: Fix small merge problem in 4xx_enet.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:11:30 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Kilauea 405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dbbd125721aea6645fdb962f36bd41f59e272f9d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:10:59 2007 +0200 |
| |
| ppc4xx: Add PPC405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:09:36 2007 +0200 |
| |
| ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:07:50 2007 +0200 |
| |
| ppc4xx: Add initial fdt support to 4xx (first needed on 405EX) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a424a8bb2924b90724b944165d3141f1fa8dfe5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:04:57 2007 +0200 |
| |
| POST: Add 405EX support to 4xx UART POST test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 15:10:02 2007 +0200 |
| |
| DTT: Prepare DS1775 driver for use of different I2C addresses |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 19e93b1e16d267220440d827b920fbad8abfa70f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 14:23:43 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Change PCIe status output to match common style |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ff68f66bcb0da847845aa2fac11eba6c25938c99 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 09:22:33 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Disable debug output as default |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 97923770cb52b64d69eec958a11b2eda8d46e0f7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 09:18:23 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4dbee8a90df613eb517aadbecebd70f168913d30 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 07:57:20 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai |
| |
| 128MB seems to be the smallest possible value for the memory size |
| for on PCIe port. With this change now the BAR's of the PCIe cards |
| are accessible under U-Boot. |
| |
| One big note: This only works for PCIe port 0 & 1. For port 2 this |
| currently doesn't work, since the base address is now 0xc0000000 |
| (0xb0000000 + 2 * 0x08000000), and this is already occupied by |
| CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean |
| to change the base addresses completely and this change would have |
| too much impact right now. |
| |
| This patch adds debug output to the 4xx pcie driver too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 21:16:32 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 15:01:02 2007 +0200 |
| |
| ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms |
| |
| These files were introduced with the IBM 405GP but are currently used on all |
| 4xx PPC platforms. So the name doesn't match the content anymore. This patch |
| renames the files to 4xx_pci.c/h. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 94276eb0a7a35b9e8c053d589ae225b0f017a237 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 14:14:58 2007 +0200 |
| |
| ppc4xx: Add a comment for 405EX PCIe endpoint configuration |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 10:38:09 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3) |
| |
| (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access |
| the SDR registers of the PCIe ports. This makes the overall design |
| clearer, since it removed a lot of switch statements which are not |
| needed anymore. |
| |
| Also, the functions ppc4xx_init_pcie_rootport() and |
| ppc4xx_init_pcie_entport() are merged into a single function |
| ppc4xx_init_pcie_port(), since most of the code was duplicated. |
| This makes maintainance and porting to other 4xx platforms |
| easier. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 026f71106871f31d17d0ea0db9a7547ff92934bc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 07:48:09 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2) |
| |
| This patch is the first patch of a series to make the 440SPe PCIe code |
| usable on different 4xx PPC platforms. In preperation for the new 405EX |
| which is also equipped with PCIe interfaces. |
| |
| (2) This patch renames the functions from 440spe_ to 4xx_ with a |
| little additional cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c7c6da23028f146d912514b95aefa3da7cf37699 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 07:34:10 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1) |
| |
| This patch is the first patch of a series to make the 440SPe PCIe code |
| usable on different 4xx PPC platforms. In preperation for the new 405EX |
| which is also equipped with PCIe interfaces. |
| |
| (1) This patch renames the files from 440spe_pcie to 4xx_pcie |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Oct 24 01:37:36 2007 +0200 |
| |
| TQM5200: Call usb_cpu_init() during board init |
| |
| usb_cpu_init() configures GPS USB pins, clocks, etc. and |
| is required for proper operation of kernel USB subsystem. |
| This setup was previously done in the kernel by the fixup |
| code which is being removed, thus low level init must be |
| done by U-boot now. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit b5af773f8d92677e06f3295b45557c9d0a487c24 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:51:27 2007 +0800 |
| |
| Fix the issue of usb_kbd driver missing the scan code of key 'z'. |
| |
| The scan code of the key 'z' is 0x1d, which should be handled. |
| |
| The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI |
| controller. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 85ac988e86f9414fa645b0148dc66c3520a1eb84 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Oct 15 11:59:17 2007 +0200 |
| |
| PXA USB OHCI: "usb stop" implementation. |
| |
| Some USB keys need to be switched off before loading the kernel |
| otherwise they can remain in an undefined status which prevents them |
| to be correctly recognized by the kernel. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 31548249decf18a6b877a18436b6139dd483fe4a |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:40:35 2007 -0400 |
| |
| DHCP Client Fix |
| |
| This is a multi-part message in MIME format. |
| |
| commit e6e505eae94ed721e123e177489291fc4544b7b8 |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:19:03 2007 -0400 |
| |
| Found a bug in the way the DHCP Request packet is built, where the IP address |
| that is offered by the server is bound to prematurely. This patch is a fix of |
| that bug where the IP address offered by the DHCP server is not used until |
| after the DHCP ACK from the server is received. |
| |
| Signed-off-by: Justin Flammia <jflammia@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:16:22 2007 -0500 |
| |
| ColdFire 54455: Fix correct boot location for atmel and intel |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:14:00 2007 -0500 |
| |
| ColdFire: Fix build error when CONFIG_WATCHDOG is defined |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c67e12e705b204cfe914e3e3e693d69a445dcabf |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:12:36 2007 -0500 |
| |
| ColdFire 5329: Assign correct SDRAM size and fix cache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:10:23 2007 -0500 |
| |
| ColdFire 5253: Assign correct SDRAM size |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2acefa72ee0026f862ab65597ca687428f63a973 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:09:17 2007 -0500 |
| |
| ColdFire 5282: Fix external flash boot and return dramsize |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Oct 25 17:20:01 2007 +0200 |
| |
| TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk). |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Oct 24 08:42:25 2007 +0200 |
| |
| TQM5200: fix spurious characters on second serial interface |
| |
| With this patch PSC3 is configured as UART. This is done, because if |
| the pins of PSC3 are not configured at all (-> all pins are GPI), |
| due to crosstalk, spurious characters may be send over the RX232_2_TXD |
| signal line. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit be4a87f11e297a5cededbf7dd71c0248f3874acd |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Oct 24 08:41:27 2007 +0200 |
| |
| TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller |
| |
| Some commands for the STK52xx base board try to access the SM501 grafic |
| controller. But the TQM5200S has no grafic controller (only the TQM5200 |
| and the TQM5200B have). This patch deactivates the commands accessing |
| the SM501 for the TQM5200S. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b31f64343ead9482cd439b1adbe4c34026a641b1 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Oct 22 16:45:53 2007 +0200 |
| |
| TQM5200: fix spurious characters on second serial interface |
| |
| With this patch PSC3 is configured as UART. This is done, because if |
| the pins of PSC3 are not configured at all (-> all pins are GPI), |
| due to crosstalk, spurious characters may be send over the RX232_2_TXD |
| signal line. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Oct 22 16:40:06 2007 +0200 |
| |
| TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller |
| |
| Some commands for the STK52xx base board try to access the SM501 grafic |
| controller. But the TQM5200S has no grafic controller (only the TQM5200 |
| and the TQM5200B have). This patch deactivates the commands accessing |
| the SM501 for the TQM5200S. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Oct 21 09:14:28 2007 +0200 |
| |
| Mips: Fix string functions differ prototype declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Oct 19 17:51:40 2007 -0500 |
| |
| fsl_pci_init enable COMMAND_MEMORY if inbound window |
| |
| Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows |
| to pciauto_setup_device has the side effect of not getting |
| COMMAND_MEMORY set. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit e9d0d527992566ebef9826962ff1745b2f082b92 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 10:55:24 2007 +0200 |
| |
| delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9c4884f54da982ce990c7d1760ac81b0704d3c64 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 08:10:15 2007 +0200 |
| |
| fix warning: no return statement in function returning non-void |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e78220f6e514206757acfe247297fc9a328a881f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 06:33:45 2007 +0200 |
| |
| xsengine: Fix no partition type specified, use DOS as default |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 10cdb8dbd67a818823ab9ec88b68fc348903db59 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:24:59 2007 +0200 |
| |
| lubbock: Fix no partition type specified, use DOS as default |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 23 16:50:03 2007 +0200 |
| |
| Coding style: keep lists sorted; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 58b74b05c621e2835ecf4e2d3243042cf4186777 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:09:05 2007 +0200 |
| |
| Fix missing drivers makefile entries ds1722.c mw_eeprom.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 96455bfebc9887837095c9051d216f53c61b5f10 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:07:39 2007 +0200 |
| |
| Fix warning differ in signedness in board/innokom/innokom.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Fri Oct 19 00:25:33 2007 +0200 |
| |
| fix pxa255_idp board |
| |
| The pxa255_idp being an old unmaintained board showed several issues: |
| 1. CONFIG_INIT_CRITICAL was still defined. |
| 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. |
| 3. Symbol flash_addr was undeclared. |
| 4. The boards lowlevel_init function was still called memsetup. |
| 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. |
| 6. Using -march=armv5 instead of -march=armv5te resulted in lots of |
| 'target CPU does not support interworking' warnings on recent compilers. |
| 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as |
| indexes rather than the register definitions from the pxa-regs header |
| file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to |
| avoid any ambiguities. |
| 8. There were several redefinition warnings concerning ICMR, OSMR3, |
| OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. |
| 9. The board configuration file was rather outdated. |
| 10. The part header file defined the vendor, product and revision arrays |
| as unsigned chars instead of just chars in the block_dev_desc_t |
| structure. |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6 |
| Author: Rune Torgersen <runet@innovsys.com> |
| Date: Wed Oct 17 11:56:31 2007 -0500 |
| |
| Make MPC8266ADS command selection more robust |
| |
| Fix MPC8266 command line definition so it won't break when new commands |
| are added to u-boot. |
| Signed-off-by Rune Torgersen <runet@innovsys.com> |
| |
| commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Oct 23 13:14:10 2007 +0200 |
| |
| Motion-PRO: Update configuration to accomodate next generation board. |
| |
| New board has faster oscillator and a different Flash chip. This affects: |
| - CFG_MPC5XXX_CLKIN |
| - SDRAM timings |
| - Flash CS configuration (timings) |
| - Flash sector size, and thus MTD partition layout |
| - malloc() arena size (due to bigger Flash sectors) |
| - smaller memory test range (due to bigger malloc() arena) |
| |
| This patch also enables more extensive memory testing via "mtest". |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit eff501904df2bf1724a750062628ba2c51dbb1f8 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Oct 23 11:36:07 2007 +0200 |
| |
| Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration. |
| |
| Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay |
| register must be written a value of 0x00000004 as the first step of the |
| SDRAM contorller configuration. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Oct 23 10:22:16 2007 +0100 |
| |
| Move PL01* serial drivers to drivers/serial and adjust Makefiles. |
| |
| commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 10:17:42 2007 +0200 |
| |
| ppc4xx: lwmon5: Some further GPIO config changes |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Sun Oct 21 22:10:10 2007 +0900 |
| |
| [MIPS] Fix UNCACHED_SDRAM |
| |
| PHYSADDR is for physical address, KSEG1ADDR is for uncached. |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 00101dd7a32d12f698150123e47e4b3420279f86 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 21:30:42 2007 +0900 |
| |
| [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit eb700636db017d310edaeb559b13d82588560674 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:37 2007 +0900 |
| |
| [MIPS] u-boot.lds: Define _gp in a standard manner |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] Fix $gp usage |
| |
| Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use. |
| As a general principle, we should use _gp for $gp. |
| |
| Thanks to linker script's help we fortunately have _gp which equals to |
| _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not |
| be able to access to GOT entires, global variables and procedure entry |
| points. The right thing to do is to use _gp. |
| |
| This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_' |
| which holds the offset from _gp. When updating GOT entries, we use this |
| offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_. |
| |
| This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then |
| I made some change to leave over num_got_entries. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Vlad Lungu <vlad@comsys.ro> |
| |
| commit cbf2323b5b8285ea01acba7bbb905a3162d9b021 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] u-boot.lds: Fix __got_start and __got_end |
| |
| Ensure that __got_start points to top of the `.got', and __got_end points |
| to bottom as well, so that we never fail to count num_got_entries. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] u-boot.lds: Remove duplicated .sdata section |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 21 01:01:17 2007 +0200 |
| |
| Minor coding style cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Thu Oct 4 20:47:10 2007 +0300 |
| |
| Fix NE2000 driver: |
| |
| Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try |
| to do anything in eth_stop() if eth_init() was not called. |
| Simplified RX path in order to avoid timeouts on really really |
| fast NE2000 cards (read: qemu with internal tftp), NetLoop() is |
| clever enough to cope with 1 packet per eth_rx(). |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit df90968b48fb34fa9072fab150db2ac89678f537 |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 24 13:32:13 2007 -0400 |
| |
| Setting MSR[DE] in do_reset |
| |
| Hello, |
| This patch ensures the soft reset of the board for the 85xx boards |
| by setting the MSR[DE] in the do_reset function. |
| |
| Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> |
| |
| commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 24 13:36:01 2007 -0400 |
| |
| MSR overwrite fix |
| |
| Hello, |
| This patch fixes the MSR overwrite in the start.S when moving out of |
| the last 4K page. |
| |
| Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> |
| |
| commit 5c7ea64bb74a850a2b2303f853a8270695ad8602 |
| Author: Dan Wilson <dwilson@fulcrummicro.com> |
| Date: Fri Oct 19 11:33:48 2007 -0500 |
| |
| tsec driver should clear RHALT on startup |
| |
| This was causing problems for some people. |
| |
| Signed-off-by: Alain Gravel <agravel@fulcrummicro.com> |
| Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7600d47b8f6a10019e537dc9a62aa1498df58d25 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 11 00:29:18 2007 -0500 |
| |
| Improve handling of PCI interrupt device tree fixup on MPC85xx CDS |
| |
| On the MPC85xx CDS we have two issues: |
| |
| 1. The device tree fixup code did not check to see if the property we are |
| trying to update is actually found. Its possible that it would update |
| random memory starting at 0. |
| |
| 2. Newer Linux kernel's have moved the location of the PCI nodes to be |
| sibilings of the soc node and not children. The explicit PATH to the PCI |
| node would not be found for these device trees. Add the ability to handle |
| both paths. In the future we shouldn't handle such fixups by explicit path. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a3063eec775719b7e91023bbec3f64b3118791df |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 11 00:18:48 2007 -0500 |
| |
| Set OF_STDOUT_PATH to match the default console on MPC8568 MDS |
| |
| On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured |
| console. Make it so we match that config what we tell Linux as the early |
| STDOUT console. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e1ce3cb617bb06f91f82f98915391175addf3e82 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 2 11:12:27 2007 -0500 |
| |
| Remove magic numbers from cache related operations for mpc85xx |
| |
| The mpc85xx start code uses some magic numbers that we actually |
| have #defines for in <config.h> so use those instead. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5441f61a3d8b7034f19fc1361183e936198e6dbb |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Oct 19 16:47:26 2007 +0200 |
| |
| Fix two typos. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 281df457c1aa50d2752165d0c5c3282d4027b974 |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Thu Oct 18 17:47:19 2007 +0800 |
| |
| mpc83xx: Add configure entry for MPC83xx ATM support |
| |
| Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into |
| Makfile and MAKEALL |
| |
| Signed-off-by: Tony Li <tony.li@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit d2646554f529a9577515eceb0ec5eceee18244ba |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Thu Oct 18 17:44:38 2007 +0800 |
| |
| mpc83xx: pq-mds-pib.c typo error |
| |
| Correct to val8 from val. |
| |
| Signed-off-by: Tony Li <tony.li@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3e11ae80fec1ee12194940955431186abf6009c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 17 15:40:19 2007 +0200 |
| |
| ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 15:27:43 2007 -0500 |
| |
| Initial mpc8610hpcd Makefile files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 15:26:51 2007 -0500 |
| |
| Initial mpc8610hpcd cpu/, README and include/ files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 13:54:01 2007 -0500 |
| |
| Initial mpc8610hpcd board files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd |
| Author: runet@innovsys.com <runet@innovsys.com> |
| Date: Tue Oct 16 14:50:40 2007 -0500 |
| |
| Make MPC8266ADS board compile again. |
| |
| Signed-off-by: Runet Torgersen <runet@innovsys.com> |
| |
| commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 27 12:41:03 2007 -0500 |
| |
| 86xx: Allow for fewer DDR slots per memory controller. |
| |
| As a direct correlation exists between DDR DIMM slots |
| and SPD EEPROM addresses used to configure them, use |
| the individually defined SPD_EEPROM_ADDRESS* values to |
| determine if a DDR DIMM slot should have its SPD |
| configuration read or not. |
| |
| Effectively, this now allows for 1 or 2 DIMM slots |
| per memory controller. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d4a945e189a2f384c66432316da2788a0ac1607 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Oct 15 11:59:17 2007 +0200 |
| |
| PXA USB OHCI: "usb stop" implementation. |
| |
| Some USB keys need to be switched off before loading the kernel |
| otherwise they can remain in an undefined status which prevents them |
| to be correctly recognized by the kernel. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit e2e93442e558cf1500e92861f99713b2f045ea22 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 15 11:39:00 2007 +0200 |
| |
| ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier |
| |
| The I2C bootstrap values that can be setup via the "bootstrap" command, |
| were setup incorrect regarding the generation of the internal sync PCI |
| clock. The values for PLB clock == 133MHz were slighly incorrect and the |
| values for PLB clock == 166MHz were totally incorrect. This could |
| lead to a hangup upon booting while PCI configuration scan. |
| |
| This patch fixes this issue and configures valid PCI divisor values |
| for the sync PCI clock, with respect to the provided external async |
| PCI frequency. |
| |
| Here the values of the formula in the chapter 14.2 "PCI clocking" |
| from the 440EPx users manual: |
| |
| AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz |
| |
| 33MHz async PCI frequency: |
| PLB = 133: |
| => 32 <= 44.3 <= 65 (div = 3) |
| |
| PLB = 166: |
| => 32 <= 55.3 <= 65 (div = 3) |
| |
| 66MHz async PCI frequency: |
| PLB = 133: |
| => 65 <= 66.5 <= 132 (div = 2) |
| |
| PLB = 166: |
| => 65 <= 83 <= 132 (div = 2) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 15 11:29:33 2007 +0200 |
| |
| ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite |
| |
| The BCSR status bit for the 66MHz PCI operation was correctly |
| addressed (MSB/LSB problem). Now the correct currently setup |
| PCI frequency is displayed upon bootup. |
| |
| This patch also fixes this problem on Rainier & Yellowstone, since these |
| boards use the same souce code as Sequoia & Yosemite do. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit da3aad55cbde80ab6e301aafa82a2c411aa53eff |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM860M: adjust for doubled flash sector size. |
| |
| Adjust flash map to support the new S29GLxxN (N-Type) Flashes with |
| doubled sector size. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Wed Sep 26 17:55:54 2007 +0200 |
| |
| TQM8xx: Fix CAN timing. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit d43e489baf02afae49077791fb22332d240d8656 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Sep 27 14:54:36 2007 +0200 |
| |
| TQM866M: fix SDRAM refresh |
| |
| At 133 MHz the current SDRAM refresh rate is too fast |
| (measured 4 * 1.17 us). |
| CFG_MAMR_PTA changes from 39 to 97. This result |
| in a refresh rate of 4 * 7.8 us at the default clock |
| 50 MHz. At 133 MHz the value will be then 4 * 2.9 us. |
| This is a compromise until a new method is found to |
| adjust the refresh rate. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9ef57bbee1c67cc01da2026c242c4692db32be36 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:55 2007 +0200 |
| |
| TQM866M: adjust for doubled flash sector size. |
| |
| Adjust flash map to support the new S29GLxxN (N-Type) Flashes with |
| doubled sector size. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Oct 14 16:12:29 2007 +0200 |
| |
| [FIX] XUPV2P change command handling |
| and remove code violation |
| |
| commit 636400198228d96983c06657b17f760f5989958e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 14 00:13:19 2007 +0200 |
| |
| Prepare for 1.3.0-rc3 release |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 68f14f77ca5fe5f9cc025c8cae101671f628309f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Sep 29 13:41:37 2007 +0200 |
| |
| Fix warning differ in signedness in cpu/pxa/mmc.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit fc19e36f741e8bc727c0a330170b3b5db90399ef |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 13 23:51:14 2007 +0200 |
| |
| Fix warning differ in signedness in board/mpl/vcma9/vcma9.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 13 21:15:39 2007 +0200 |
| |
| Coding Style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e1893815b0999410d7a327589611c7b38e95299e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Oct 12 15:49:39 2007 +0200 |
| |
| GP3 SSA: enable RTC |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8002012041f1ff9f997a5727abe5015f70cd2e46 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Oct 9 13:58:24 2007 +0200 |
| |
| [ads5121] EEPROM support added. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 7b624ad254b97e5a25dca2304a398b64aeedaffe |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Oct 6 18:55:35 2007 +0200 |
| |
| AVR32: Initialize bi_flash* in board_init_r |
| |
| The ATSTK1000-specific flash driver intializes bi_flashstart, |
| bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI |
| driver, don't. |
| |
| Initialize these in board_init_r instead so that things will still be |
| set up correctly when we switch to the CFI driver. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Oct 5 10:40:54 2007 +0200 |
| |
| tqm5200: Fix CONFIG_CMD_PCI typo in board config file. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 92869195ef8210758d2176230c0a36897afd50ed |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Oct 5 09:46:06 2007 +0200 |
| |
| CM5200: Fix missing null-termination in hostname manipulation code |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Tue Oct 2 19:09:01 2007 +0200 |
| |
| Fix memtest breakage |
| |
| CFG_MEMTEST_START uses weird magic involving gd, which fails to |
| compile. Use hardcoded values instead (we actually know how much RAM |
| we have on board.) |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 738815c0cc44aa329097f868dc1efc49ede9c5ba |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 2 11:44:46 2007 +0200 |
| |
| ppc4xx: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 87c1833a39e944db66385286fd5e28f9b3fcdd50 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 2 11:44:19 2007 +0200 |
| |
| ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Mon Oct 1 09:51:50 2007 +0200 |
| |
| Program EPLD to force full duplex mode for PHY. |
| |
| EPLD forces modes of PHY operation. By default full duplex is turned off. |
| This fix turns it on. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818 |
| Author: Timo Ketola <timo.ketola@exertus.fi> |
| Date: Mon Sep 24 14:50:32 2007 +0300 |
| |
| Bugfix: Use only one PTD for one endpoint |
| |
| Original isp116x-hcd code prepared multiple PTDs for longer than 16 |
| byte transfers for one endpoint. That is unnecessary because the |
| ISP116x is able to split long data from one PTD into multiple |
| transactions based on the buffer size of the endpoint. It also caused |
| serious problems if the endpoint NAKed some of the transactions. In |
| that case ISP116x wouldn't notice that the other PTDs were for the same |
| endpoint and would try the other PTDs possibly out of order. That would |
| break the whole transfer. |
| |
| This patch makes isp116x_submit_job to use one PTD for one transfer. |
| |
| Signed-off-by: Timo Ketola <timo.ketola@exertus.fi> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 86ec86c04326c3913178a7679aa910de071da75d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Sep 27 23:27:47 2007 +0200 |
| |
| Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 3e954beb614b5b190d7f4f4c3b641437a0132e35 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Sep 11 14:12:55 2007 +0200 |
| |
| ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Sep 26 16:35:54 2007 -0500 |
| |
| 85xx io out functions need sync after write. |
| |
| This fixes the mc146818 rtc_read/write functions for 85xx. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Sep 25 15:48:05 2007 -0600 |
| |
| Fpga: fix incorrect test of CFG_FPGA_XILINX macro |
| |
| CFG_FPGA_XILINX is a bit value used to test against the value in |
| CONFIG_FPGA. Testing for a value will always return TRUE. I don't |
| think that is the intention in this code. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:41:30 2007 +0200 |
| |
| [FIX] change command handling and removing code violation |
| |
| commit f240356507038e5ce55e8a24cb2607e9eae6d10c |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:36:06 2007 +0200 |
| |
| [FIX] change sets of commands |
| because changing of command handling brings |
| compilation problems |
| |
| commit cb1bc63b75a232571eb69aa2c8aa919321655845 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:30:42 2007 +0200 |
| |
| [FIX] Email reparation & Copyright |
| Both codes are written by myself without any |
| support from CTU |
| |
| commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:25:11 2007 +0200 |
| |
| [PATCH] Change macro name for UartLite |
| because PowerPC 405 can use UartLite as console |
| |
| commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:21:19 2007 +0200 |
| |
| [PATCH] Add support for design without interrupt controller |
| Polling timer |
| |
| commit 0731933ec8ec45d02ba89b52df673d526873cdde |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:19:48 2007 +0200 |
| |
| [FIX] resolve problem with cpu without barrel shifter |
| |
| commit db14d77995ce515b728b178b63f82babe60e3d56 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:18:46 2007 +0200 |
| |
| [FIX] repair email address |
| |
| commit 481d4328618804add1f818a6c96296121cd0528e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:17:42 2007 +0200 |
| |
| [FIX] repair MFSL commands |
| |
| commit b90c045f035c3cc9b5d2edaed6048dfb74e40763 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:08:37 2007 +0200 |
| |
| synchronizition with mainline |
| |
| commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:42:38 2007 +0900 |
| |
| sh: Add support command of ide with sh |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit d91ea45d15cf8e0987456bd211ffbb650824b6f1 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:38:42 2007 +0900 |
| |
| sh: Update Makefile |
| |
| Add support MS7722SE01 to Makefile. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:31:13 2007 +0900 |
| |
| sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 047375bfa4c3052fa50a748da7ff89e9dad3b364 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:19:24 2007 +0900 |
| |
| sh: Update MS7750SE01 platform |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 516ad760db3553766267ada01b7d5d727faa4bbd |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:17:08 2007 +0900 |
| |
| sh: Remove comment out code from include/asm-sh/cpu_sh4.h |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b02bad128669e567fce87d8df823b06a0144b8db |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:12:30 2007 +0900 |
| |
| sh: Update core code of SuperH. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 66dcad3a9a53e0766d90e0084123bd8529522fb0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Sep 20 00:04:14 2007 +0200 |
| |
| v1.3.0-rc2 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 135e19bc2773ebca487e9a8371f67e1ba202313a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 18 21:36:35 2007 +0200 |
| |
| Avoid compiler warning. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8a783a65851bc7421ab69f442261215e21b8891a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Sep 18 12:24:57 2007 -0600 |
| |
| Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config |
| |
| /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded |
| nulls in a string differently. For example, the following statement: |
| echo "this is a string\0" > afile |
| Will produce the following with /bin/bash: |
| "this is a string\0" |
| But with /bin/dash, will produce: |
| "this is a string |
| |
| Bug fixed by moving the embedded null out of the makefile and into the |
| config header. Also renamed the macro to avoid usage colision with the same |
| macro used by other board ports. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 18 17:40:27 2007 +0200 |
| |
| MCC200: fix build warning |
| |
| The MCC200 board config file includes version.h for some customer- |
| specific setting, which causes warnings with "make depend"; build |
| version.h before depend. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit bd86220f58b99d6896198c385fda132f0c980915 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 18 13:07:54 2007 +0100 |
| |
| Move coloured led API to status_led.h |
| Improve indentation in drivers/at45.c |
| |
| commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7 |
| Author: Eirik Aanonsen <eaa@wprmedical.com> |
| Date: Tue Sep 18 08:47:20 2007 +0200 |
| |
| Update atstk1002 bootargs. |
| |
| Updates to atstk1002 U-Boot header file: |
| - Changed bootargs: |
| * Set the bootargs for at1002 to point to the SD-card partition instead |
| * ... of the boot flash. |
| * Removing the rootfstype since that argument are not needed. |
| |
| Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225 |
| Author: Eirik Aanonsen <eaa@wprmedical.com> |
| Date: Wed Sep 12 13:32:37 2007 +0200 |
| |
| Add some comments to clocks in atstk1002.h |
| |
| This patch applies some clarifying comments to how the different |
| clocks are setup according to atstk1002.h Some of the previous |
| comments where stating wrongful information. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 97213f32416ead885deafea86774e912ffd60ad0 |
| Author: David Saada <David.Saada@ecitele.com> |
| Date: Mon Sep 17 17:04:47 2007 +0200 |
| |
| Description: Add NEC's PCI OHCI module ID to the USB OHCI driver |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| |
| commit 30363e98fa470fbecea5e8bc0f1443352754f303 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Sep 17 08:20:47 2007 +0200 |
| |
| Small whitespace cleanup of OneNAND patch |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:15:14 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 3/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 17aa2800457df0c06b41516f46f126712c196219 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:14:34 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 2/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 916527f4809a7bcd811f1f1daf34af184e31dd8c |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:13:49 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 1/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Sep 16 20:51:57 2007 +0200 |
| |
| [FIX] remove files form repository |
| |
| commit 67c31036acaaaa992fc346cc89db0909a7e733c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 16 17:10:04 2007 +0200 |
| |
| TQM8xx[LM]: Fix broken environment alignment. |
| |
| With recent toolchains, the environment sectors were no longer aligned to |
| sector boundaries. The reason was a combination of two bugs: |
| |
| 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined |
| for all TQM8xxL and TQM8xxM boards. But "include/common.h", where |
| this gets defined, is not included here (and cannot be included |
| without causing lots of problems). |
| |
| Added a new #define CFG_USE_PPCENV for all boards which really |
| want to put the environment is a ".ppcenv" section. |
| |
| 2) The linker scripts just include environment.o, silently assuming |
| that the objects in that file are really in the order in which |
| they are coded in the C file, i. e. "environment" first, then |
| "redundand_environment", and "env_size" last. However, current |
| toolchains (GCC-4.x) reorder the objects, causing the environment |
| data not to start on a flash sector boundary: |
| |
| Instead of: we got: |
| |
| 40008000 T environment 40008000 T env_size |
| 4000c000 T redundand_environment 40008004 T redundand_environment |
| 40010000 T env_size 4000c004 T environment |
| |
| Note: this patch fixes just the first part, and cures the alignment |
| problem by making sure that "env_size" gets placed correctly. However, |
| we still have a potential issue because primary and redundant |
| environment sectors are actually swapped, i. e. we have now: |
| |
| 40008000 T redundand_environment |
| 4000c000 T environment |
| 40010000 T env_size |
| |
| This shall be fixed in the next version. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit eb6da8050797c204c9d010548424186c7ce32fc1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 16 02:39:35 2007 +0200 |
| |
| TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cd2d1602c54cc6957bdef3872272a4b264893960 |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 10 14:54:56 2007 -0400 |
| |
| Typo fix in tsec.c |
| |
| Fixup for the break statement in wrong place. |
| |
| [Patch by urwithsughosh@gmail.com] |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 11 17:04:00 2007 +0200 |
| |
| Fix do_div() usage in nand process output |
| |
| Fix usage of do_div() in nand erase|read|write process output. |
| |
| The last patch to nand_util.c introduced do_div() instead of libgcc's |
| implementation. But do_div() returns the quotient in its first |
| macro parameter and not as result. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c750d2e6692a000a82f29de7bf24e3dc21239161 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Sep 12 12:36:53 2007 +0200 |
| |
| NAND: Add CFG_NAND_QUIET option |
| |
| This config option sets the default for the progress information |
| output behavior that can also be configured through the 'quiet' |
| environment variable. |
| |
| The legacy NAND code does not print the current progress info |
| on the console. So this option is for backward compatibility for |
| units that are in the field and where setting the quiet variable |
| is not an option. With CFG_NAND_QUIET set to '1' the console |
| progress info is turned off. This can still be overwritten |
| through the environment variable. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit dcb88630290d2bcd803386dd4c2be73142994c4f |
| Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com> |
| Date: Thu Sep 13 16:06:05 2007 -0700 |
| |
| ColdFire: fix build error becasue of bad type of mii_init() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 314d5b6ce52a4ed19dd295d1364e246c5e605017 |
| Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com> |
| Date: Thu Sep 13 16:04:05 2007 -0700 |
| |
| ColdFire: Fix build error caused by pixis.c |
| |
| Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit e21659e30660a1377c42af135a6114efe39801d9 |
| Author: Sam Sparks <SSparks@twacs.com> |
| Date: Fri Sep 14 11:14:42 2007 -0600 |
| |
| Update MPC8349ITX*_config to place config.tmp in right place. |
| |
| MPC834ITX*_config does not store config.tmp at the correct locatation, |
| causing MPC8349ITXGP to have the wrong TEXT_BASE. |
| |
| Signed-off-by: Sam Sparks <SSparks@twacs.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 1218abf1b5817a39a82399b4b928b00750575bda |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Sep 15 20:48:41 2007 +0200 |
| |
| Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 66b3f24d665be678a9dbb125b1e84185400f63b5 |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Sat Sep 15 11:55:42 2007 +0200 |
| |
| Make DECLARE_GLOBAL_DATA_PTR global for DaVinci |
| |
| As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not |
| function local. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805 |
| |
| commit 991b089d1ce5ad945725e3657a8f106dfa02a38e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Sep 15 00:03:35 2007 +0200 |
| |
| Synchronize with U-BOOT mainline |
| |
| commit d7fee32b7e61fe11c64e371cde79faa4768e8350 |
| Author: Sam Sparks <SSparks@twacs.com> |
| Date: Fri Sep 14 11:14:42 2007 -0600 |
| |
| Update MPC8349ITX*_config to place config.tmp in right place. |
| |
| MPC834ITX*_config does not store config.tmp at the correct locatation, |
| causing MPC8349ITXGP to have the wrong TEXT_BASE. |
| |
| Signed-off-by: Sam Sparks <SSparks@twacs.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Sep 13 18:21:48 2007 +0200 |
| |
| cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9 |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e1f601b572db5de9aa81a0b77c68a86994fe24c4 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Sep 13 16:33:59 2007 +0200 |
| |
| tqm5200: Restore customary env. variable boot commands for powerpc kernels |
| |
| - update default definitions of kernel_addr and fdt_addr env. variables |
| - make arch/powerpc booting the default scenario |
| - update MTD partition layout to match the above |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit f34024d4a328e6edd906456da98d2c537155c4f7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Sep 12 00:48:57 2007 +0200 |
| |
| Fix memory corruption problem on STX GP3 SSA Board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 11 15:35:01 2007 +0100 |
| |
| Final tidy |
| |
| commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Sep 11 15:42:11 2007 +0200 |
| |
| [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to |
| scan on second pci bus. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Sep 11 12:57:52 2007 +0200 |
| |
| [ppc4xx] Individual handling of sdram.c for bamboo_nand build |
| |
| Bamboo has a file sdram.c which needs special treatment when building in |
| separate directory. It has to be linked to build directory otherwise it is |
| not seen. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit d45963854eff39d575124d859419bb4953ce2c87 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Sep 11 00:37:04 2007 +0200 |
| |
| [FIX] Microblaze ML401 - repare FLASH handling |
| |
| commit 38c1ef728d19950414a8ab1ccfc53767848fa346 |
| Author: Sean MCGOOGAN <sean.mcgoogan@st.com> |
| Date: Mon Sep 10 16:55:59 2007 +0100 |
| |
| Allocate CPU Architecture Code for STMicroelectronics' ST200. |
| |
| Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com> |
| --------------------------------------------------- |
| |
| commit 754bac48156f8958d8f6a53a51eda88ab5758929 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 10 20:42:31 2007 +0200 |
| |
| Update version to match current state. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Mon Sep 10 17:39:08 2007 +0200 |
| |
| [MPC512x] Streamline frame handling in the FEC driver |
| |
| - convert frame size settings to be derived from a single base |
| - set frame size to the recommended default value |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 11:34:00 2007 +0900 |
| |
| Remove compiler warning: target CPU does not support interworking |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 9 21:21:33 2007 +0200 |
| |
| Fix compile error in spc1920 config. |
| |
| Signed-off-by: Markus Klotzbücher <mk@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Fri Sep 7 09:25:07 2007 -0600 |
| |
| Bugfix: make bootm+libfdt compile on boards with no flash |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 18:35:37 2007 +0200 |
| |
| [PPC440SPe] PCIe environment settings for Katmai and Yucca |
| |
| - 'pciconfighost' is set by default in order to be able to scan bridges |
| behind the primary host/PCIe |
| |
| - 'pciscandelay' env variable is recognized to allow for user-controlled |
| delay before the PCIe bus enumeration; some peripheral devices require a |
| significant delay before they can be scanned (e.g. LSI8408E); without the |
| delay they are not detected |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 7f1913938984ef6c6a46cb53e003719196d9c5de |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 18:20:23 2007 +0200 |
| |
| [PPC440SPe] Improve PCIe configuration space access |
| |
| - correct configuration space mapping |
| - correct bus numbering |
| - better access to config space |
| |
| Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the |
| first device on the first bus. We now allow to configure up to 16 buses; |
| also, scanning for devices behind the PCIe-PCIe bridge is supported, so |
| peripheral devices farther in hierarchy can be identified. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 17:46:18 2007 +0200 |
| |
| [PPC440SPe] Convert machine check exceptions handling |
| |
| Convert using fixup mechanism to suppressing MCK for the duration of config |
| read/write transaction: while fixups work fine with the case of a precise |
| exception, we identified a major drawback with this approach when there's |
| an imprecise case. In this scenario there is the following race condition: |
| the fixup is (by design) set to catch the instruction following the one |
| actually causing the exception; if an interrupt (e.g. decrementer) happens |
| between those two instructions, the ISR code is executed before the fixup |
| handler the machine check is no longer protected by the fixup handler as it |
| appears as within the ISR code. In consequence the fixup approach is being |
| phased out and replaced with explicit suppressing of MCK during a PCIe |
| config read/write cycle. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit ff7640c9ead8806b5d827f2b29f9cb2632add729 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Sep 7 17:43:36 2007 +0200 |
| |
| Fix typo in MAKEALL script. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 17:09:21 2007 +0200 |
| |
| [MPC512x] Proper handling of larger frames in the FEC driver |
| |
| When frame larger than local RX buffer is received, it is split and handled |
| by two buffer descriptors. Prior to this patch the FEC driver discarded |
| contents of a buffer descriptor without the 'LAST' bit set, so the first |
| part of the frame was lost in case of larger frames. This fix allows to |
| safely combine the two pieces into the whole frame. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 8d17979d0359492a822a0a409d26e3a3549b4cd4 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Sep 7 17:05:36 2007 +0200 |
| |
| [MPC512x] Correct fixup relocation |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit a89cbbd27a60e6740772000fd0688ffba1c2576a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Sep 7 01:21:25 2007 +0200 |
| |
| Update CHANGELOG, minor coding style cleanup. |
| |
| commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 23:01:49 2007 +0200 |
| |
| PXA270: Added support for TrizepsIV board. |
| |
| This patch add support for the Trizeps IV module (520Mhz). |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 80172c6181c912fbb34ea3ba0c22b232b419b47f |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 22:57:04 2007 +0200 |
| |
| PXA270: Add support for multiple serial ports. |
| |
| This patch adds support for multiple serial ports to the PXA target. |
| FFUART, BTUART and STUART are supported. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 22:48:47 2007 +0200 |
| |
| PXA270: fix compile issue (invalid lvalue) |
| |
| Code is broken for PXA270 due to "invalid lvalue in assignment". |
| |
| This patch fix it in pxa-regs.h |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Thu Aug 30 18:19:05 2007 +0800 |
| |
| Add BUILD_DIR support for bios emulator. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit b4d8a55145442f136982634862341a3e02002bda |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 31 14:41:51 2007 +0900 |
| |
| [MIPS] Remove inline asm string functions |
| |
| Stop using inline string functions on MIPS as other ARCHs do so, |
| since the optimized inline asm versions are not small. |
| |
| This change is triggered by a following MIPS build error: |
| common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init': |
| common/exports.c:32: undefined reference to `strcmp' |
| make: *** [u-boot] Error 1 |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 31 14:41:45 2007 +0900 |
| |
| [MIPS] Update asm string header |
| |
| This patches contains several bugfixes and cleanups in the latest upstream: |
| |
| - Don't include linux/config.h |
| - Remove buggy inline version of memscan. |
| - Merge with Linux 2.6.11-rc3. |
| - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4. |
| - Goodbye mips64. 31704 lines of code bite the dust. |
| - Replace extern inline with static inline. |
| - Fix return value of strncpy. |
| - Remove a bunch more "$1" clobbers. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Sep 4 17:31:22 2007 +0200 |
| |
| Fix do_bootm_linux() so that multi-file images with FDT blob boot. |
| |
| Fix incorrect blob address calculation in do_bootm_linux() that prevents |
| booting the kernel from a multi-file image (kernel + initrd + blob). |
| |
| Also, make minor updates to the U-Boot's output and to the coding style. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 041a2554ad619e80dce520c1a33210affcb6a3f2 |
| Author: Gary Jennejohn <gary.jennejohn@freenet.de> |
| Date: Fri Aug 31 14:29:04 2007 +0200 |
| |
| Add support for Sil680 IDE controller. |
| |
| o add drivers/sil680.c to support the Sil680 IDE-controller. |
| o drivers/Makefile: add sil680.o. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit e79021223bc339df655e360645a52c457a74b067 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:47:40 2007 -0600 |
| |
| bootm/fdt: Only process the fdt if an fdt address was provided |
| |
| Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style |
| kernels using the board info structure (instead of passing a device tree) |
| This change allows the old style booting to be used if the fdt argument |
| was not passed to 'bootm'. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:46:23 2007 -0600 |
| |
| Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT |
| |
| Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200 |
| |
| Tested on: lite5200b |
| |
| Note: the fixup functions have not been moved to a common place. This |
| patch is targeted for immediate merging as in solves a build issue, but |
| the final name/location of the fixups is still subject to debate. I |
| propose to merge this now, and move the fixups in the next merge window |
| to be usable by all targets. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 41bb76e941929f54a73206fb132f7a4c275543a3 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:46:17 2007 -0600 |
| |
| libfdt: add convenience function fdt_find_and_setprop() |
| |
| Given the path to a node, fdt_find_and_setprop() allows a property value |
| to be set directly. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 80767a6cead9990d9e77e62be947843c2c72f469 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed Sep 5 16:04:41 2007 +0100 |
| |
| Changed API name to coloured_led.h |
| Removed code using deprecated ifdef CONFIG_BOOTBINFUNC |
| Tidied other cpu/arm920t/start.S code |
| |
| commit 56a9270521baaa00e12639a978302a67f61ef060 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 30 16:18:18 2007 -0500 |
| |
| Fix ULI RTC support on MPC8544 DS |
| |
| The RTC on the M1575 ULI chipset requires a dummy read before |
| we are able to talk to the RTC. We accomplish this by adding a |
| second memory region to the PHB the ULI is on and read from it. |
| |
| The second region is added to maintain compatiabilty with Linux's |
| view of the PCI memory map. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f75e89e9b5714db2b0e80074071dfbdd6f59488a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 30 01:58:48 2007 -0500 |
| |
| ft_board_setup update 85xx/86xx of pci/pcie bus-range property. |
| |
| pcie is now differentiated from pci. Add 8641 bus-range updates. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 9f5c3d3720e777a572dcdc8af2008b44c7243885 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 16:18:38 2007 +0100 |
| |
| Add coloured led interface for ARM boards. |
| Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered. |
| |
| commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:49:28 2007 +0100 |
| |
| Move include/led.h to board/at91rm9200dk |
| |
| commit 6e4bf9b24e57c15abc6542e685d06380bc64af27 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:25:51 2007 +0100 |
| |
| Ran Lindent on drivers/at45.c |
| |
| commit 557ab89d294f08dd532f21d19861b40093200a33 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:23:50 2007 +0100 |
| |
| Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX |
| |
| commit 81b73dec16fd1227369a191e725e10044a9d56b8 |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Fri Aug 31 15:21:46 2007 +0200 |
| |
| ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia |
| |
| The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is |
| set to non-zero, because it doesn't support MRM (memory-read- |
| multiple) correctly. We now added the possibility to configure |
| this register in the board config file, so that the default value |
| of 8 can be overridden. |
| |
| Here the details of this patch: |
| |
| o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow |
| board-specific settings. As an example the sequoia board requires 0. |
| Idea from Stefan Roese <sr@denx.de>. |
| o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the |
| PCI IO-space. Obtained from Stefan Roese <sr@denx.de>. |
| o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set |
| CFG_PCI_CACHE_LINE_SIZE to 0. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 60174746c668b309378a91488dded898e9553eae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Aug 31 10:01:51 2007 +0200 |
| |
| Fix TFTP OACK code for short packets. |
| |
| The old code had a loop limit overflow bug which caused a semi- |
| infinite loop for small packets, because in "i<len-8", "i" was signed, |
| but "len" was unsigned, and "len-8" became a huge number for small |
| values of "len". |
| |
| This is a workaround which replaces broken commit 8f1bc284. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Thu Aug 30 15:03:05 2007 +0200 |
| |
| Reduce BOOTDELAY variable to 1 second by default for STK1002 |
| |
| Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Thu Aug 30 15:03:04 2007 +0200 |
| |
| Remove double quotation marks around MAC address for STK1002 |
| |
| Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ff13ac8c7bbebb238e339592de765c546dba1073 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 30 14:42:15 2007 +0200 |
| |
| Backout commit 8f1bc284 as it causes TFTP to fail. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1900fbf255acba8b94fb442a16408ea85a1d46a6 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 30 02:26:17 2007 -0500 |
| |
| Revert "Fix MPC8544DS PCIe3 scsi." |
| |
| This reverts commit 9468e680. |
| Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Aug 29 18:26:24 2007 -0600 |
| |
| tftp: don't implicity trust the format of recevied packets |
| |
| The TFTP OACK code trusts that the incoming packet is formated as |
| ASCII text and can be processed by string functions. It also has a |
| loop limit overflow bug where if the packet length is less than 8, it |
| ends up looping over *all* of memory to find the 'blksize' string. |
| |
| This patch solves the problem by forcing the packet to be null |
| terminated and using strstr() to search for the sub string. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 29 16:31:18 2007 +0200 |
| |
| ppc4xx: Change lwmon5 default environment to support Linux RTC |
| |
| The Linux PCF8563 RTC driver doesn't do autoprobing, so we need |
| to supply the RTC I2C address as bootline parameter. This patch |
| adds support for this rtc probing parameter to the bootargs: |
| |
| "rtc-pcf8563.probe=0,0x51" |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2602a5c40ae37ab965a4e240854fdaffb51328a4 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 29 09:06:05 2007 -0500 |
| |
| sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE |
| |
| this had slipped through the cracks, since the sbc board was added |
| after I wrote the original patch to remove all these symbols, and |
| before it was merged. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c5bded3c88e48ae648a75d357dc81a8255fa81f1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 14:05:30 2007 +0200 |
| |
| Add mii_init() prototype |
| |
| to get rid of a *lot* of compiler warnings. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 13:35:03 2007 +0200 |
| |
| Disable network support on cmi_mpc5xx board |
| |
| ..because it caused compiler errors and there seems to be no |
| board maintainer to take care of this. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9468e6804b7e25b0f6f52e53f47bce3175400a16 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Aug 20 09:44:00 2007 -0500 |
| |
| Fix MPC8544DS PCIe3 scsi. |
| |
| <ed.swarthout@freescale.com> |
| |
| The problem is pciauto_setup_device() getting called from fsl_pci_init.c |
| is allocating memory space it doesn't need. |
| |
| Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Aug 21 09:38:59 2007 -0500 |
| |
| 8548cds fixes |
| |
| Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the |
| correct consoledev needed for linux boot. |
| Standardize on fdt{file,addr} var to hold dtb file name. |
| |
| Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Thu Aug 23 15:20:54 2007 -0400 |
| |
| Enable L2 cache for MPC8568MDS board |
| |
| The L2 cache size is 512KB for 8568, print out the correct informaiton. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 22 17:54:49 2007 +0800 |
| |
| Remove the bios emulator binary files from MAI board |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Aug 21 17:00:17 2007 -0500 |
| |
| support board vendor-common makefiles |
| |
| if a board/$(VENDOR)/common/Makefile exists, build it. |
| |
| also add the first such case, board/freescale/common/Makefile, to |
| handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as |
| dictated by board configuration. |
| |
| thusly get rid of alternate build dir errors such as: |
| |
| FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory |
| |
| by putting the common/ mkdir command in its proper place (the common |
| Makefile). Common bits from existing individual board Makefiles have |
| been removed. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Aug 21 15:52:33 2007 +0200 |
| |
| Fix: TFTP is not working on little endian systems |
| |
| TFTP does not work anymore after multicast tftp |
| patch was applied on little endian systems. |
| This patch fix it. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 5f470948570526e9186f053a3003da7719604e90 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Aug 21 15:50:33 2007 +0200 |
| |
| Fix MAC address setting in DM9000 driver. |
| |
| The logic to check if there is a correct MAC address in the DM9000 |
| EEPROM, added in the last patch, is wrong. Now the MAC address is |
| always taken from the environment, even if a suitable MAC is present |
| in the EEPROM. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 4a8527ef086ec7c89f40674ef024ae6f988a614a |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Tue Aug 21 12:40:34 2007 +0200 |
| |
| MPC5xxx: fix some compiler warnings in USB code |
| |
| Fix the following warnings: |
| - usb.c:xx: warning: function declaration isn't a prototype |
| - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer |
| from pointer wihtout a cast |
| |
| Signed-off-by: Martin Krause <martin.krase@tqs.de> |
| |
| commit 16e23c3f5dab6937f5109365416808c7f15c122b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Mon Aug 20 23:55:33 2007 -0500 |
| |
| fsl_pci_init - Remove self PCSRBAR allocation |
| |
| CPU physical address space was being wasted by allocating a |
| PCSRBAR PCI inbound region to it's memory space. |
| |
| As a rule, PCSRBAR should be left alone since it does not affect |
| transactions from self and other masters may have changed it. |
| |
| Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com> |
| |
| commit 0e700ce03a23bb1921149bc77008ace7103d5289 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Aug 20 13:56:47 2007 +0200 |
| |
| Fix compiler warning in include/s3c2410.h |
| |
| This patch fixes the "type qualifiers ignored on fuction return tpye" |
| warning for include/s3c2410.h |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Mon Aug 20 07:09:05 2007 +0200 |
| |
| Fix compilation error for omap2420h4_config. |
| |
| omap2420h4 switched to cfi, so remove old (already disabled) flash.c |
| and flash_probe() calls in env_flash.c. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 14:34:14 2007 -0500 |
| |
| fdt: remove unused OF_FLAT_TREE_MAX_SIZE references |
| |
| and make some minor corrections to the FDT part of the README. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 01:32:05 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Aug 28 17:40:33 2007 +0200 |
| |
| [UC101] Fix: if no CF in the board, U-Boot resets sometimes. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit f98984cb194bb34dbe1db9429d3b51133af30d07 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Aug 28 17:39:14 2007 +0200 |
| |
| IDE: - make ide_inb () and ide_outb () "weak", so boards can |
| define there own I/O functions. |
| (Needed for the pcs440ep board). |
| - The default I/O Functions are again 8 Bit accesses. |
| - Added CONFIG_CMD_IDE for the pcs440ep Board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2c05fd125744981e5f2828d24e66ccc20a77d25d |
| Author: Semih Hazar <semih.hazar@indefia.com> |
| Date: Mon Aug 20 19:00:01 2007 +0300 |
| |
| AVR32: Change prototype of memset |
| |
| Signed-off-by: Semih Hazar <semih.hazar@indefia.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9c02defc29b57945b600714cf61ddfd02b02fb14 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Sat Aug 25 05:07:16 2007 +0200 |
| |
| POST: limit memory test area to not touch global data anymore |
| |
| As experienced on lwmon5, on some boards the POST memory test can |
| corrupt the global data buffer (bd). This patch fixes this issue |
| by checking and limiting this area. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 75e1a84d483e36be10e206e539b028c4889e1158 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 24 15:41:42 2007 +0200 |
| |
| ppc4xx: Add RTC POST test to lwmon5 board configuration |
| |
| Since this RTC POST test is taking quite a while to complete |
| it's only initiated upon special keypress same as the complete |
| memory POST. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d7bfa620037a6d2210159387571bdf93aa32c162 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 24 15:19:10 2007 +0200 |
| |
| ppc4xx: Change GPIO signal for watchdog triggering on lwmon5 |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c25dd8fc25e9ca3695db996a257d9ba4dab414db |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 23 11:02:37 2007 +0200 |
| |
| ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board |
| |
| This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5 |
| board. Now the "eeprom" command can be used to read/write from/to this |
| device. Additionally a new command was added "eepromwp" to en-/disable |
| the write-protect of this 2nd EEPROM. |
| |
| The 1st EEPROM is not affected by this write-protect command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c64fb30e4c5976007d56fc1789c7a0666082b536 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 22 08:56:09 2007 +0200 |
| |
| ppc4xx: Remove unused option CFG_INIT_RAM_OCM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 21 16:27:57 2007 +0200 |
| |
| ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) |
| |
| This patch adds support for the matrix keyboard on the lwmon5 board. |
| Since the implementation in the dsPCI is kind of compatible with the |
| "old" lwmon board, most of the code is copied from the lwmon |
| board directory. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3e66c078003607a7d1d214c15a5f262bc1b4032f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 19 10:27:34 2007 +0200 |
| |
| Fix some build errors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 05675735ef77dc23b5e0eb782bad1ff477b55e86 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Aug 18 22:00:38 2007 +0200 |
| |
| Update CHANGELOG. |
| |
| commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:39 2007 -0500 |
| |
| lib_ppc: make board_add_ram_info weak |
| |
| platforms wishing to display RAM diagnostics in addition to size, |
| can do so, on one line, in their own board_add_ram_info() |
| implementation. |
| |
| this consequently eliminates CONFIG_ADD_RAM_INFO. |
| |
| Thanks to Stefan for the hint. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 17 12:43:44 2007 +0900 |
| |
| PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug |
| |
| This patch has been sent on: |
| - 6 Jun 2007 |
| |
| Many users of PCI config read routines tend to ignore the function |
| ret value, and are only concerned about the contents of *val. Based |
| on this, pci_hose_read_config_{byte,word}_via_dword should initialize |
| the *val on dword read error. |
| |
| Without this fix, for example, we'll go on scanning bus with vendor or |
| header_type uninitialized. This brings many unnecessary config trials. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Aug 18 14:37:52 2007 +0200 |
| |
| ColdFire: Fix some remaining problems with CFG_CMD_ |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8280f6a1c43247616b68224675188e5ccd124650 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Aug 18 14:33:02 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4a442d3186b31893b4f77c6e82f63c4517a5224b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 19:23:50 2007 -0500 |
| |
| ColdFire: Add M5235EVB Platform for MCF523x |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 17 09:30:00 2007 -0500 |
| |
| mpc83xx: fix typo in DDR2 programming |
| |
| introduced in the implement board_add_ram_info patch as I was cleaning out the |
| magic numbers. sorry. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e58fe95784d2514fc9c21028dc59f2b319a35d80 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:53:09 2007 -0500 |
| |
| mpc83xx: move freescale boards to boards/freescale |
| |
| includes build fixes. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:59 2007 -0500 |
| |
| mpc83xx: suppress unused variable 'val8' warning |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit bbea46f76f767b919070b4829bf34c86bd223248 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:48 2007 -0500 |
| |
| mpc83xx: implement board_add_ram_info |
| |
| add board_add_ram_info, to make memory diagnostic output more |
| consistent. u-boot banner output now looks like: |
| |
| DRAM: 256 MB (DDR1, 64-bit, ECC on) |
| |
| and for boards with SDRAM on the local bus, a line such as this is |
| added: |
| |
| SDRAM: 64 MB (local bus) |
| |
| also replaced some magic numbers with their equivalent define names. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 14778585d1389d86d5846efec29e5fce892680ce |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Fri Aug 17 10:35:59 2007 +0800 |
| |
| mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support |
| |
| The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c |
| And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. |
| |
| Signed-off-by Tony Li <tony.li@freescale.com> |
| |
| commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 15:05:11 2007 -0500 |
| |
| ColdFire: Add M54455EVB for MCF5445x |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a1436a842654a8d3927d082a8ae9ee0a10da62d7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 13:20:50 2007 -0500 |
| |
| ColdFire: Add M5253EVBE platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a605aacd8324094199402816cc6d9124aba57b8d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 05:04:31 2007 -0500 |
| |
| ColdFire: Add M5249EVB platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 20:32:06 2007 -0500 |
| |
| ColdFire: Update Freescale MCF52x2 platforms |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:55:10 2007 -0500 |
| |
| ColdFire: Update EB+MCF-EV123 platform |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:46:38 2007 -0500 |
| |
| ColdFire: update TASREG platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:45:51 2007 -0500 |
| |
| ColdFire: update r5200 platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:43:20 2007 -0500 |
| |
| ColdFire: idmr platform MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:41:06 2007 -0500 |
| |
| ColdFire: cobra5272 platform for MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 56115665b4a64c10c01440c57749b265e0908fa4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:38:15 2007 -0500 |
| |
| ColdFire: MCF52x2 Header files update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:21:21 2007 -0500 |
| |
| ColdFire: MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 18:46:11 2007 -0500 |
| |
| ColdFire: MCF5329 update cache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7171977fb8fd77cfb6676953fa9a05789c450513 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 15:40:20 2007 -0500 |
| |
| ColdFire: MCF5329 header file clean up |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 15:39:17 2007 -0500 |
| |
| ColdFire: MCF5329 Update and cleanup |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 10327dc5541f947c0cf7e31fef86c4706169607a |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Thu Aug 16 16:35:02 2007 -0500 |
| |
| Add CONFIG_HAS_ETH0 to all boards with TSEC |
| |
| The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether |
| to update TSEC1's device-tree node, so we need to add it |
| to all the boards with TSECs. Do this for 83xx and 86xx, too, |
| since they will eventually do something similar. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 16 15:05:04 2007 -0500 |
| |
| Update MPC8544 DS PCI memory map |
| |
| The PCIe bus that the ULI M1575 is connected to has no possible way of |
| needing more than the fixed amount of IO & Memory space needed by the ULI. |
| |
| So make it use far less IO & memory space and have it use the shared LAW. This |
| free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed |
| by each bus. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ea5877e31ed63ade948fd1293895ec23fe01472e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 16 11:01:21 2007 -0500 |
| |
| Fix up some fdt issues on 8544DS |
| |
| It looks like we had a merge issue that duplicated a bit of code |
| in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get |
| the MAC address properly set in the device tree on boot for TSEC1 |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 07bc20560cb9d3d186cca268c05c82762e8c55ad |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Thu Aug 16 15:16:03 2007 +0200 |
| |
| PPC4xx:HCU4/5 cleanup |
| |
| Minor cleanups to confirm to the u-boot coding style. |
| Some german expressions -> english. |
| HCU5 enforces a unique IP adress for a given slot in the rack. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Thu Aug 16 15:16:02 2007 +0200 |
| |
| PPC4xx:HCU4/5 cleanup ecc/sdram init |
| |
| Make ecc initialisation robust, as DDR2-ECC errors may be generated |
| while zeroing the RAM. |
| |
| Return 16 bytes (a cacheline) less than the available memory, as the |
| board and/or PPC440EPx might have problems accessing the last bytes. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit d35b508a55508535b6e8445b718585d27df733d3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:29:56 2007 -0500 |
| |
| fdt: suppress unused variable 'bd' warning |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 82bd9ee77490588d4da785d75829ca63d0176baf |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:06:50 2007 -0500 |
| |
| Fix warnings from of_data copy fix |
| |
| Forgot to cast of_flat_tree to ulong. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7613afda77d5eec0f47d303025b0c661b70e4c73 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:44 2007 -0500 |
| |
| Don't wait for disconnected TSECs |
| |
| The TSEC driver's PHY code waits a long time for autonegotiation to |
| complete, even if the link is down. The PHY knows the link is |
| down or up before autonegotiation completes, so we can short-circuit |
| the process if the link is down. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b96c83d4ae475a70ef2635cd0e748174c44c8601 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:34 2007 -0500 |
| |
| Fix numerous bugs in the 8568 UEC support |
| |
| Actually, fixed a large bug in the UEC for *all* platforms. |
| How did this ever work? |
| |
| uec_init() did not follow the spec for eth_init(), and returned |
| 0 on success. Switch it to return the link like tsec_init() |
| (and 0 on error) |
| |
| The immap for the 8568 was defined based on MPC8568, rather than |
| CONFIG_MPC8568 |
| |
| CONFIG_QE was off |
| |
| CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" |
| |
| Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is |
| enabled |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 3a79013e2adda53332dfd0b511066a805e929a9d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:25 2007 -0500 |
| |
| Define tsec flag values in config files |
| |
| The tsec_info structure and array has a "flags" field for each |
| ethernet controller. This field is the only reason there are |
| settings. Switch to defining TSECn_FLAGS for each controller |
| in the config header, and we can greatly simplify the array, and |
| also simplify the addition of future boards. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ec7238229507e7f47533a611ea8c53319d234cf3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:13 2007 -0500 |
| |
| Add support for building all boards with a TSEC |
| |
| Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards. |
| Now we can do a MAKEALL test on all of them! |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 17:30:56 2007 -0500 |
| |
| Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards |
| |
| The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed" |
| neglected to *also* put the code inside the similar #ifdef |
| for CONFIG_OF_FLAT_TREE. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 78f9fef7f406078c8bf7191e665a73f795157746 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Aug 15 15:46:46 2007 -0500 |
| |
| mpc885ads: Don't define CONFIG_BZIP2. |
| |
| bzip2 requires a significant chunk of malloc space, and there isn't |
| enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area |
| and a downloaded image at 0x400000. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 002275a3ed8b114885f6702d6d544d0780dfe689 |
| Author: Michal Simek <Monstr@seznam.cz> |
| Date: Thu Aug 16 08:54:10 2007 +0200 |
| |
| Bios emulator - fix microblaze toolchain problem |
| |
| microblaze CPU have problem with bios_emulator code. |
| Microblaze toolchain doesn't support PRAGMA PACK. |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 16 11:51:04 2007 +0200 |
| |
| Minor Coding Style fix; Update CHANGELOG file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 11:21:49 2007 +0200 |
| |
| ppc4xx: Remove #warning in esd auto_update.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2d78074d2e806edc380c1464eb9e5df335ece65e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 22 17:32:28 2007 +0200 |
| |
| ppc7xx: Update CPCI750 board |
| |
| This small CPCI750 update extends the board specific command |
| "show_config" to display the Marvell strapping registers and |
| extends the PCI IDE controller. |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Thu Aug 16 10:46:28 2007 +0200 |
| |
| [FIX] Changes for bios_emulator code for others architecture |
| |
| commit 6e0e2253f039344f8ebd2787285fdba90e6714e8 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Thu Aug 16 10:45:09 2007 +0200 |
| |
| [FIX] Remove unused include file |
| |
| commit 9de469bd960cc1870bb40d6672ed42726b8b50d7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 10:18:33 2007 +0200 |
| |
| ppc4xx: Only enable POST FPU test on Sequoia and not Rainier |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 09:54:51 2007 +0200 |
| |
| Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 02ba7022f62bb75908296c58c63866e1d294b69a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 09:52:29 2007 +0200 |
| |
| ppc4xx: Update Sequoia/Rainier bootstrap command |
| |
| As suggested by David Mitchell, here an update for the Sequoia/Rainier |
| bootstrap command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 35cc4e4823668e8745854899cfaedd4489beb0ef |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:39 2007 -0500 |
| |
| mpc83xx: enable libfdt by default on freescale boards |
| |
| this enables libfdt code by default for the |
| freescale mpc8313erdb, mpc832xemds, mpc8349emds, |
| mpc8349itx and gp boards. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3fde9e8b22cfbd7af489214758f9839a206576cb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:33 2007 -0500 |
| |
| mpc83xx: migrate remaining freescale boards to libfdt |
| |
| this adds libfdt support code for the freescale |
| mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx, |
| and gp boards. |
| |
| Boards remain compatible with OF_FLAT_TREE. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:26 2007 -0500 |
| |
| mpc83xx: move common /memory node update mechanism to cpu.c |
| |
| also adds common prototypes to include/common.h. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:19 2007 -0500 |
| |
| mpc83xx: remaining 8360 libfdt fixes |
| |
| PCI clocks and QE frequencies weren't being updated, and the core clock |
| was being updated incorrectly. This patch also adds a /memory node if |
| it doesn't already exist prior to update. |
| |
| plus some cosmetic trimming to single line comments. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f4b2ac5ed9aaff9920d487bff8a59696c083a524 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:12 2007 -0500 |
| |
| mpc83xx: fix UEC2->1 typo in libfdt setup code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:05 2007 -0500 |
| |
| mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb |
| |
| and reorder the existing 83xx maintainers alpha. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5b4de9309d7a03aa1db2e5391ab696363391f460 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:15:05 2007 +0200 |
| |
| [FIX] Resolve problem with warnings |
| microblaze toolchain don't support PRAGMA PACK. |
| |
| commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:05:07 2007 +0200 |
| |
| [FIX] Correction command setting for Microblaze boards |
| |
| commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:03:41 2007 +0200 |
| |
| [FIX] Correction command definition |
| |
| commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 11:55:35 2007 -0500 |
| |
| 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h |
| |
| Remove a leftover in net/tftp.c while we're at it. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 12:20:40 2007 -0500 |
| |
| Move the MPC8641HPCN board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8662577fe36fdb6a44b55b998d9daac6392a736a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 11:46:22 2007 -0500 |
| |
| 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h |
| |
| Remove a leftover in net/tftp.c while we're at it. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 210f463c71917b7a4495c2103c228b9c179ae64d |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Aug 15 11:13:15 2007 -0400 |
| |
| Fix where the #ifdef CFG_BOOTMAPSZ is placed. |
| |
| Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb |
| interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT) |
| when it should have gone inside of the conditional. As a result, it |
| broke non-LIBFDT board builds. |
| |
| Also added a missing "not." to the comment. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 0e19209767194a97cec6d93dba9e64d1da8d548e |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Aug 15 12:14:23 2007 +0200 |
| |
| PPC4xx:HCU4/5-Board fix compile warning |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Aug 14 14:06:45 2007 -0500 |
| |
| Fix malloc size error in ahci_init_one. |
| |
| Typically this causes scsi init to corrupt the |
| devlist and break the coninfo command. |
| Fix a compiler size warning. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b361acd64fd2525c081b9b288b0804efe209c0e9 |
| Author: ksi@koi8.net <ksi@koi8.net> |
| Date: Tue Aug 14 10:02:16 2007 -0700 |
| |
| TI DaVinci - fix unsupported %hhx format |
| |
| Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| |
| commit f01dbb5424a81453c81190dd30e945891466f621 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 18:42:36 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 10:32:59 2007 -0500 |
| |
| Fix initrd/dtb interaction |
| |
| The original code would wrongly relocate the blob to be right before |
| the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ, |
| if it is defined. So we make two changes: |
| |
| 1) flag the blob for relocation whenever its address is above BOOTMAPSZ |
| |
| 2) If the blob is being relocated, relocate it before kbd, not initrd |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit e54b970173769307a116bd34028b6d0c2eea2a4e |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 15:40:00 2007 +0100 |
| |
| Supply spi interface in at45.c |
| |
| commit 4ce846ec59f36b85d6644a769690ad3feb667575 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 15:12:01 2007 +0200 |
| |
| POST: Fix merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 15:03:17 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 779e975117a75e91fcebe226a63104dbfb924ab1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:44:41 2007 +0200 |
| |
| ppc4xx: Add initial Zeus (PPC405EP) board support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c5a172a5fd636c12467429e3f7910e53773979c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:41:55 2007 +0200 |
| |
| POST: Add option for external ethernet loopback test |
| |
| When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST |
| is not done using an internal loopback connection, but by assuming |
| that an external loopback connector is plugged into the board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb2b4010ae426245172988804ee8d9193fb41038 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:39:44 2007 +0200 |
| |
| POST: Add ppc405 support to cache and UART POST |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:46:32 2007 +0100 |
| |
| Replace lost end of at45.c. |
| |
| commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:30:06 2007 +0100 |
| |
| Update Makefiles for merged and split at45.c. |
| |
| commit 3454cece2db57cb9eb7087995f7e73066a163f71 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:21:06 2007 +0100 |
| |
| Delete the merged files. |
| |
| commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:14:05 2007 +0100 |
| |
| Add the files. |
| |
| commit d4fc6012fd0a5c211b825691f44b06f8032c0551 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:10:52 2007 +0100 |
| |
| Add MACH_TYPE records for several AT91 boards. |
| Merge to two at45.c files into a common file, split to at45.c and spi.c |
| Fix spelling error in DM9161 PHY Support. |
| Initialize at91rm9200 board (and set LED). |
| Add PIO control for at91rm9200dk LEDs and Mux. |
| Change dataflash partition boundaries to be compatible with Linux 2.6. |
| |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| |
| commit 4ef35e53c693556c54b0c22d6f873de87bade253 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 09:54:46 2007 +0200 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 09:47:27 2007 +0200 |
| |
| Coding style cleanup; rebuild CHANGELOG |
| |
| commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a |
| Author: Randy Vinson <rvinson@linuxbox.(none)> |
| Date: Tue Feb 27 19:42:22 2007 -0700 |
| |
| 85xxCDS: Add make targets for legacy systems. |
| |
| The PCI ID select values on the Arcadia main board differ depending |
| on the version of the hardware. The standard configuration supports |
| Rev 3.1. The legacy target supports Rev 2.x. |
| |
| Signed-off-by Randy Vinson <rvinson@mvista.com> |
| |
| commit e41094c7e38177c755fbd9b182018069614f080d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:50:09 2007 -0500 |
| |
| 85xxCDS: Enable the VIA PCI-to-ISA bridge. |
| |
| Author: Randy Vinson <rvinson@linuxbox.(none)> |
| |
| Enable the PCI-to-ISA bridge in the VIA Southbridge located on the |
| Arcadia main board. |
| |
| Signed-off-by: Randy Vinson <rvinson@mvista.com> |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 00:14:25 2007 -0500 |
| |
| Add support for UEC to 8568 |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit c59e4091ffe0148398b9e9ff14a019ea038b7432 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue Jun 19 14:18:34 2007 -0400 |
| |
| Add PCI support for MPC8568MDS board |
| |
| This patch is against u-boot-mpc85xx.git of www.denx.com |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit d111d6382c99fdea08c2312eeeae8786945e189a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue Jun 19 14:18:32 2007 -0400 |
| |
| Empirically set cpo and clk_adjust for mpc85xx DDR2 support |
| |
| This patch is against u-boot-mpc85xx.git of www.denx.com |
| |
| Setting cpo to 0x9 for frequencies higher than 333MHz is verified on |
| both MPC8548CDS board and MPC8568MDS board, especially for supporting |
| 533MHz DDR2. |
| |
| Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for |
| DDR2 on all current board versions especially ver 1.92 or later to bring |
| up. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 3db0bef59eab1155801618cef5c481e97553b597 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 7 18:07:27 2007 -0500 |
| |
| Use an absolute address when jumping out of 4k boot page |
| |
| On e500 when we leave the 4k boot page we should use an absolute address since |
| we don't know where the board code may want us to be really running at. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Aug 13 14:49:59 2007 -0500 |
| |
| MPC85xx BA bits not set for 3-bit bank address DIMM |
| |
| The current implementation does not set the number of bank address bits |
| (BA) in the processor. The default assumes 2 logical bank bits. This |
| works fine for a DIMM that uses devices with 4 internal banks (SPD |
| byte17 = 0x4) but needs to be set appropriately for a DIMM that uses |
| devices with 8 internal banks (SPD byte17 = 0x8). |
| |
| Signed-off-by: Greg Davis <DavisG@embeddedplanet.com> |
| |
| commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Aug 13 14:38:06 2007 -0500 |
| |
| Fix minor 85xx warnings |
| |
| Some patches had inserted warnings into the build: |
| * mpc8560ads declared data without using it |
| * cpu_init declared ecm and immap without using it in all CONFIGs |
| * MPC8548CDS.h had its default filenames changed so that they contained |
| "\m" in the paths. Made the defaults not Windows-specific (or |
| anything-specific) |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f2cff6b104f82b993bef6086ce0c97159bbe1add |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:52 2007 -0500 |
| |
| 8548cds PCIE support. |
| |
| Make the early L1 cache stack region guarded to prevent speculative |
| fetches outside the locked range. |
| |
| Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions. |
| init.S whitespace cleanup. |
| |
| Allow TEXT_BASE value to be specified on command line. This allows it |
| to be set to 0xfffc0000 which cuts the uboot binary in half. |
| |
| Clear and enable lbc and ecm errors. |
| |
| Update last_busno in device-tree for pci and pcie. |
| |
| Remove load of obsolete cpu/mpc85xx/pci.0 |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:51 2007 -0500 |
| |
| 8544ds PCIE support |
| |
| PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. |
| |
| Enable LBC and ECM errors and clear error registers. |
| |
| Add tftpflash env var to get uboot from tftp server and flash it. |
| |
| Add pci/pcie convenience env vars to display register space: |
| "run pcie3regs" to see all pcie3 ccsr registers |
| "run pcie3cfg" to see all cfg registers |
| Whitespace cleanup and MPC8544DS.h |
| |
| Enable CONFIG_INTERRUPTS. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:34:21 2007 -0500 |
| |
| 85xx start.S cleanup and exception support |
| |
| From: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| Support external interrupts from platform to eliminate system hangs. |
| Define CONFIG_INTERRUPTS board configure option to enable. |
| Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC. |
| |
| Remove extra cpu initialization redundant with hardware initialization. |
| Whitespace cleanup. |
| |
| Define and use _START_OFFSET consistent with other processors using |
| ppc_asm.tmpl |
| |
| Move additional code from .text to boot page to make room for |
| exception vectors at start of image. |
| |
| Handle Machine Check, External and Critical exceptions. |
| |
| Fix e500 machine check error determination in traps.c |
| |
| TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:33:18 2007 -0500 |
| |
| Add MPC8544DS README |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 40c7f9b0de4e300370adfc704128fa0f79a143b6 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:48 2007 -0500 |
| |
| 85xx allow debugger to configure ddr. |
| |
| Only check for mpc8548 rev 1 when compiled for 8548. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:47 2007 -0500 |
| |
| mpc85xx L2 cache reporting and SRAM relocation option. |
| |
| Allow debugger to override flash cs0/cs1 settings to enable alternate |
| boot regions |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:46 2007 -0500 |
| |
| e500 needs ppc_asm.tmp MCK_EXCEPTION |
| |
| Always define MCK_EXCEPTION macro - so e500 can use it too. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 53a5c424bf8655b7b4e2c305a441963259a26a81 |
| Author: David Updegraff <dave@cray.com> |
| Date: Mon Jun 11 10:41:07 2007 -0500 |
| |
| multicast tftp: RFC2090 |
| |
| Implemented IETF RFC2090, Multicast TFTP. Initial implementation |
| on Realtek RTL8139 and Freescale TSEC. |
| |
| Signed-off-by: David Updegraff <dave@cray.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1 |
| Author: Wilson Callan <wcallan@savantav.com> |
| Date: Sat Jul 28 10:56:13 2007 -0400 |
| |
| New CONFIG_BOOTP_SERVERIP option |
| |
| Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different |
| from the bootp server |
| |
| Signed-off-by: Wilson Callan <wcallan@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1 |
| Author: Mike Rapoport <mike@compulab.co.il> |
| Date: Sun Aug 12 08:48:27 2007 +0300 |
| |
| Add ability to take MAC address from the environment to DM9000 driver |
| |
| Signed-off-by: Mike Rapoport <mike@compulab.co.il> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit be5d72d10d47609326226225181e301fb9a33b58 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 13 21:57:53 2007 +0200 |
| |
| Minor coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Sat Aug 11 06:54:58 2007 -0500 |
| |
| Modify SBC8641D to use new Freescale PCI routines |
| |
| PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT |
| adapter. |
| |
| Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Signde-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a08458303e7f9db67f296980036d3292c35cb45c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jun 29 18:38:51 2007 +0200 |
| |
| atmel_mci: Fix data timeout value |
| |
| Calculate the data timeout based on values from the CSD instead of |
| just using a hardcoded DTOR value. This is a backport of a similar fix |
| in BSP 2.0, with one additional fix: the DTOCYC value is rounded up |
| instead of down. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Aug 13 17:22:31 2007 +0200 |
| |
| AVR32: Include <div64.h> instead of <asm/div64.h> |
| |
| include/asm-avr32/div64.h was recently moved to include/div64.h, but |
| cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of |
| the patch was merged perhaps?) |
| |
| This patch updates cpu/at32ap/interrupts.c so that the avr32 port |
| compiles again. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Jun 27 13:34:26 2007 +0200 |
| |
| atmel_mci: Use 512 byte blocksize if possible |
| |
| Instead of always using the largest blocksize the card supports, check |
| if it can support smaller block sizes and use 512 bytes if possible. |
| Most cards do support this, and other parts of u-boot seem to have |
| trouble with block sizes different from 512 bytes. |
| |
| Also enable underrun/overrun protection. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| |
| commit 273db7e1bdd1937e32f1d4507321bb721ebd3118 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Aug 13 09:05:33 2007 +0200 |
| |
| ppc4xx: Fix problem in PLL clock calculation |
| |
| This patch was originall provided by David Mitchell <dmitchell@amcc.com> |
| and fixes a bug in the PLL clock calculation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 21:34:50 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 21:34:34 2007 +0200 |
| |
| Minor alignment of output, 2nd try. |
| Also update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6b309f22a724fad8418e811751a0741b893419cf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 20:35:49 2007 +0200 |
| |
| Minor alignment of output |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6f6d7b9c8559e241e8d232621542b8b59699b07b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 18:28:18 2007 +0200 |
| |
| Cleanup output on ADS5121 board |
| |
| Signed-off-by: Wolfgang Denk |
| |
| commit a4d2636f2a859245ed3a401f26189da2dfda4ceb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 15:11:38 2007 +0200 |
| |
| Adapt board configuration and fix kernel crash on MCC200 board. |
| |
| The update procedure was modified to turn off the USB subsystem |
| before exit for MCC200 and TRAB. This is necessary as otherwise the |
| USB controller continues to write periodically to system memory! |
| |
| MCC200-specific notes: |
| - the patch disables the magic key check for MCC200 |
| - the patch contains the configuration changes made |
| for the new revision of the board. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 14:47:54 2007 +0200 |
| |
| Adjust default configuration of ADS5121 board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 14:27:39 2007 +0200 |
| |
| Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5fe6be6208dda852c3564e384bd78d75784dea3e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Aug 7 21:14:22 2007 -0400 |
| |
| Improve error print messages. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 99dffca3b7590a16a00bc475c860b67b2a3f1462 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jul 17 13:57:04 2007 -0500 |
| |
| fdt: allow for builds that don't want env and bd_t nodes |
| |
| protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the |
| area. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 91148bf7aeba142d6f348805db7625db7da64d6f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jul 17 13:56:53 2007 -0500 |
| |
| fdt: do board setup based on fdt address specified on bootm line |
| |
| The last fdt patch to bootm did board setup based on the address |
| specified by a prior fdt address command invocation. The bootm |
| code, as its call to fdt_chosen does, should use the fdt specified |
| by the user on the bootm command. Note this restores full |
| functionality for the 8360's existing default boot environment |
| values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr' |
| before booting a kernel). |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e125a2ffc209dd34794e326c7175658253beadf3 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Jul 10 20:40:39 2007 -0400 |
| |
| Call ft_board_setup() from the bootm command. |
| |
| In the patch titled "Create new fdt boardsetup command..." I removed the |
| call to ft_board_setup() from the routine fdt_chosen(), but I forgot |
| to add a direct call back into cmd_bootm.c |
| |
| This fixes the oversight by adding the direct call to the bootm command. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 23:25:28 2007 -0400 |
| |
| Create new fdt boardsetup command, fix bug parsing [] form of set values. |
| |
| Previously ft_board_setup() was called by fdt_chosen() which was not |
| really correctly structured. This splits ft_board_setup() out by creating |
| a new fdt boardsetup command. |
| |
| Fix a bug when parsing fdt set command values which have the square |
| bracket form [00 11 22 33] - the length was updated incorrectly in when |
| parsing that form. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 6f35ded9e85493595e0eb66a82b502a95326d049 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 20:55:58 2007 -0400 |
| |
| Tighten up the error messages. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit c45874b05aae897a6c29d1a97d4bb708fca2756c |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 19:52:23 2007 -0400 |
| |
| Asthetic improvements: error messages and line lengths. |
| |
| Tighten up the error messages, split overlength lines. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri May 25 22:08:57 2007 -0400 |
| |
| Fix fdt_chosen() to call ft_board_setup(), clean up long lines. |
| |
| The fdt_chosen() function was adding/seting some properties ad-hoc |
| improperly and duplicated (poorly) what was done in ft_board_setup() |
| |
| Clean up long lines (setting properties, printing errors). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 06e19a07701c968f15d72c083b5872a1a11c7b01 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon May 21 23:27:16 2007 -0400 |
| |
| For fdt_find_node_by_path(), handle the root path properly. |
| |
| Also removes the special case root path detection in cmd_fdt.c since it |
| is no longer necessary. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9675ee7208ab965d13ea8d8262d77ac4160ef549 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu May 17 23:54:36 2007 -0400 |
| |
| Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 1a861169bc3758f9de3aead62b058736c6891246 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Jun 6 22:47:58 2007 -0400 |
| |
| Replace fdt_node_offset() with fdt_find_node_by_path(). |
| |
| The new name matches more closely the kernel's name, which is also |
| a much better description. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit addd8ce83078c25f0eca5f23adbdfc64ca50a243 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed May 16 22:39:59 2007 -0400 |
| |
| Fix cmd_fdt line lengths, refactor code. |
| |
| Break lines that were greater than 80 characters in length. |
| Move the fdt print and property parsing code to separate static functions |
| to reduce coding clutter in the fdt_cmd handling body. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 25114033ab21788810c48ba4df103b649da1223b |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat May 12 09:47:25 2007 -0400 |
| |
| FDT command improvements. |
| |
| Fix "fdt set" so that it will create a non-existing property. |
| Add "fdt mknode" to create nodes. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 38eb508e8e811e2e57628f445de3a24a23c7d804 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat May 12 09:45:46 2007 -0400 |
| |
| Reorganize and fix problems (returns) in the bootm command. |
| |
| Do *NOT* return after the "point of no return" has been passed. |
| If something goes wrong, the board must be reset after that point. |
| Move the "Transferring control to Linux" debug message back to where it |
| belongs: just before transferring control to linux. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 89c8757d8f213c47709bdc4efe0695263a6080a6 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue May 8 21:27:35 2007 -0400 |
| |
| Fix bugs in the CONFIG_OF_LIBFDT |
| |
| Stupid coding mistakes (identified by Timur Tabi, thanks). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 22:47:15 2007 -0400 |
| |
| Improve fdt move length handling. |
| |
| Make the length parameter optional: if not specified, do the move using |
| the current size unchanged. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 22:23:36 2007 -0400 |
| |
| Minor code clean up. |
| |
| Declare the variable fdt properly as extern. |
| Call the "set_fn" function pointer the "short way" without the full |
| dereferencing syntax. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 21:24:27 2007 -0400 |
| |
| Improve error messages, more informative. |
| |
| Print more than the raw libfdt error message strings. This is especially |
| useful for cluing in the user when the bootm command aborts due to |
| blob problems. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 20 22:46:53 2007 -0400 |
| |
| libfdt: Conditionally compile based on CONFIG_OF_LIBFDT |
| |
| This is the way u-boot reduces configured-out code. At Wolfgang |
| Grandegger and Wolfgang Denk's request, make libfdt conform. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 923efd286411ed052d9e074f59f8986d6081061c |
| Author: Bruce Adler <bruce.adler@ccpu.com> |
| Date: Fri Aug 10 14:54:47 2007 -0700 |
| |
| add image size and descriptors for Spartan 3E FPGA chips |
| |
| Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1) |
| |
| Signed-off by: Bruce Adler <bruce.adler@ccpu.com> |
| |
| commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 15:34:48 2007 -0500 |
| |
| make MAKEALL more immune to merge conflicts |
| |
| ..by placing board entries one per line, as suggested by jdl. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 13:28:25 2007 -0500 |
| |
| README: Remove outdated cpu type, board type, and NAME_config lists |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 49bb59912d21aacb507eb81fd21fb7af650c706c |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Aug 10 15:48:59 2007 +0800 |
| |
| mpc83xx: Suppress the warning 'burstlen' |
| |
| suppress the warning 'burstlen' of spd_sdram. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit c646bba6465a45c60746d4cc1602cd06c1960f2d |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 15:11:03 2007 -0500 |
| |
| Add support for SBC8641D. Config files. |
| |
| Add support for Wind River's SBC8641D reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Acked-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8ac273271d57321f90505c7a51cdb1ef2113b628 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 15:10:53 2007 -0500 |
| |
| Add support for SBC8641D. Board files. |
| |
| Add support for Wind River's SBC8641D reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Acked-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c2c0ab4aff86622b837a48a0e560351f9afafb95 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 20:34:58 2007 +0200 |
| |
| Conding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e |
| Author: Sergey Kubushyn <ksi@koi8.net> |
| Date: Fri Aug 10 20:26:18 2007 +0200 |
| |
| [ARM] TI DaVinci support, hopefully final |
| |
| Add support for the following DaVinci boards: |
| - DV_EVM |
| - SCHMOOGIE |
| - SONATA |
| |
| Changes: |
| |
| - Split into separate board directories |
| - Removed changes to MTD_DEBUG (or whatever it's called) |
| - New CONFIG_CMD party line followed |
| - Some cosmetic fixes, cleanup etc. |
| - Patches against the latest U-Boot tree as of now. |
| - Fixed CONFIG_CMD_NET in net files. |
| - Fixed CONFIG_CMD_EEPROM for schmoogie. |
| - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and |
| DV_EVM. Can't check if it works on SONATA, don't have a board any more, |
| but it at least compiles. |
| |
| Here is an excerpt from session log on SCHMOOGIE... |
| |
| U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) |
| |
| DRAM: 128 MB |
| NAND: 128 MiB |
| In: serial |
| Out: serial |
| Err: serial |
| ARM Clock : 297MHz |
| DDR Clock : 162MHz |
| ETH PHY : DP83848 @ 0x01 |
| U-Boot > iprobe |
| Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F |
| U-Boot > ping 192.168.253.10 |
| host 192.168.253.10 is alive |
| U-Boot > |
| |
| Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| Acked-by: Dirk Behme <dirk.behme@gmail.com> |
| Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 2e4d94f1e3c2961428967a33b6ff2520568391b3 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:45 2007 -0500 |
| |
| fsl_pci_init cleanup. |
| |
| Do not enable normal errors created during probe (master abort, perr, |
| and pcie Invalid Configuration access). |
| |
| Add CONFIG_PCI_NOSCAN board option to prevent bus scan. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:44 2007 -0500 |
| |
| pciauto_setup_device bars_num fix |
| |
| Passing bars_num=0 to pciauto_setup_device should assign no bars. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 6 17:39:44 2007 -0500 |
| |
| 8641hpcn: Do correct sized pointer math. |
| |
| When I rebased Ed's patch and cleaned up a few compilation |
| problems, I apparently rebased my brain on crack first. |
| Fix that by doing (char *) sized pointer math as needed. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cfc7a7f5bb3273c9951173c788001d45118f141f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Aug 2 14:42:20 2007 -0500 |
| |
| cpu/86xx fixes. |
| |
| Remove rev 1 fixes. |
| Always set PICGCR_MODE. |
| Enable machine check and provide board config option |
| to set and handle SoC error interrupts. |
| |
| Include MSSSR0 in error message. |
| |
| Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 10:42:25 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Thu Aug 2 17:42:08 2007 +0200 |
| |
| Make use of generic 64bit division in nand_util.c |
| |
| Use generic 64bit division in nand_util.c. This makes nand_util.c |
| independent of any toolchain 64bit division. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit f7c086e94e8ce9aad7268af97f73aa6884686f27 |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Thu Aug 2 17:41:14 2007 +0200 |
| |
| Move 64bit division from avr32 to generic lib |
| |
| Move the 64bit division from lib_avr32 to lib_generic. With this, all |
| boards can do_div/__div64_32 if needed, not only avr one. Code is put |
| to lib_generic, so no larger memory footprint if not used. No code |
| modifications. Thanks for proposal by HÃ¥vard Skinnemoen. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:31:22 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU5 files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 6e5de26c6e7580faf16e87745cd488b92b492d0c |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:30:33 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU4 files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit e8397fc78c9394d71de233a4d810fbc9047e4c76 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:38:26 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: common files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit ac982ea5a4f2f993efcf52dca122f5a59df047d8 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:28:44 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: make related |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 137fdd9f474ecb853efdace5200576308c67f18d |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:28:03 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU5 config |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:27:15 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU4 config |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:25:31 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: READMEs |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 641cca9569ce351ddb287fd3343d8b1dcb591db4 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:37:40 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: Infrastructure |
| |
| This series of patches adds support for 2 boards from Netstal Maschinen. |
| |
| The HCU4 has a PPC405Gpr and |
| the HCU5 has a PPC440EPX. |
| |
| The HCU4 has a somehow complicated flash setup, as the booteprom is |
| only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more |
| elegant solution. |
| |
| The HCU5 has only a booteprom as the whole code will be downloaded from a |
| different board which has HD, CD-ROM, etc and where all code is stored. |
| |
| This is my third try. I incorporated all suggestions made by Wolfgang and Stefan. |
| Thanks them a lot. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 08:42:55 2007 +0200 |
| |
| ppc4xx: Update lwmon5 POST configuration |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Fri Aug 10 08:25:22 2007 +0200 |
| |
| POST: Add ppc4xx UART POST support without external uart clock (lwmon5) |
| |
| The patch adds support for UART POST on ppc44x-based boards with no |
| external serial clocks installed. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Aug 6 18:18:34 2007 -0500 |
| |
| mpc83xx: fix ITX[GP] O=builddir builds |
| |
| make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop. |
| |
| Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or |
| "BUILD_DIR=<some dir> ./MAKEALL ..." |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Aug 1 15:00:59 2007 +0800 |
| |
| mpc83xx: Correct the README for DDR ECC |
| |
| Update the README for DDR ECC, change the name |
| to README.mpc83xx.ddrecc. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Aug 1 15:00:15 2007 +0800 |
| |
| mpc83xx: Consolidate the ECC support of 83xx |
| |
| Remove the duplicated source code of ecc command on the <board>.c, |
| for reused, move these code to cpu/mpc83xx directory. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 036575c544cf1b69654d8fb334bda69c6ff3da36 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Sat Aug 4 13:37:39 2007 +0800 |
| |
| mpc83xx: Correct the burst length for DDR2 with 32 bits |
| |
| The burst length should be 4 for DDR2 with 32 bits bus |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:33 2007 -0500 |
| |
| mpc83xx: add support for the MPC8323E RDB |
| |
| MPC8323E based board with 64MB fixed SDRAM, 16MB flash, |
| five 10/100 ethernet ports connected via an ICPlus IP175C |
| switch, one PCI slot, and serial. Features not supported |
| in this patch are SD card interface, 2 USB ports, and the |
| two phone ports. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:28 2007 -0500 |
| |
| mpc83xx: fixup generic pci for libfdt |
| |
| add libfdt support to the generic 83xx pci code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f57ac7a7b37109245b69db80839ebee26179966a |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:22 2007 -0500 |
| |
| mpc83xx: fix 8360 and cpu functions to update fdt being passed |
| |
| ..and not the global fdt. Rename local fdt vars to blob so as not to |
| be confused with the global var with the same three-letter name. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8be404459a6b7395415a57bb35e8377e3b2b5acb |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Jul 4 21:34:24 2007 -0400 |
| |
| mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled |
| |
| Several node strings were not correct (trailing slashes and properties |
| in the strings) |
| Added setting of the timebase-frequency. |
| Improved error messages and use debug() instead of printf(). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 26d02c9bbac1751c5e19294f000100b48d43a920 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Jul 4 21:27:30 2007 -0400 |
| |
| mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path(). |
| |
| The new name matches more closely the kernel's name, which is also |
| a much better description. |
| |
| These are the mpc83xx changes made necessary by the function name change. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9be39a67c9f8fef7107f5df09d673005f04d0963 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 10:41:56 2007 +0800 |
| |
| mpc83xx: Add support for the display of reset status |
| |
| 83xx processor family has many reset sources, such as |
| power on reset, software hard reset, software soft reset, |
| JTAG, bus monitor, software watchdog, check stop reset, |
| external hard reset, external software reset. |
| sometimes, to figure out the fault of system, we need to |
| know the cause of reset early before the prompt of |
| u-boot present. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 10:41:04 2007 +0800 |
| |
| mpc83xx: Fix the align bug of SDMA buffer |
| |
| According to the latest user manual, the SDMA temporary |
| buffer base address must be 4KB aligned. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 13:21:12 2007 +0800 |
| |
| mpc83xx: Revise the MPC8360EMDS readme doc |
| |
| When the rev2.x silicon mount on the MPC8360EMDS baord, |
| and if you are using the u-boot version after the commit |
| 3fc0bd159103b536e1c54c6f4457a09b3aba66ca. |
| to make the ethernet interface usable, we have to setup |
| the jumpers correctly. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Jul 3 13:46:32 2007 -0500 |
| |
| FSL I2C driver programs the two I2C busses differently |
| |
| The i2c_init() function in fsl_i2c.c programs the two I2C busses differently. |
| The second I2C bus has its slave address programmed incorrectly and is |
| missing a 5-us delay. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit df33f6b4d6d63693dd9200808b242de1b86cb8e8 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Jul 3 13:04:34 2007 -0500 |
| |
| Update SCCR programming in cpu_init_f() to support all 83xx processors |
| |
| Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the |
| bitfields for all 83xx processors. The code to update some bitfields was |
| compiled only on some processors. Now, the bitfields are programmed as long |
| as the corresponding CFG_SCCR option is defined in the board header file. |
| This means that the board header file should not define any CFG_SCCR macros |
| for bitfields that don't exist on that processor, otherwise the SCCR will be |
| programmed incorrectly. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9546266999f0b9b51372636614211b88d90f0f25 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Fri Jun 22 13:04:22 2007 +0200 |
| |
| TQM834x: cleanup configuraton |
| |
| Remove irritating #undef DEBUG |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc |
| Author: david.saada <David.Saada@ecitele.com> |
| Date: Mon Jun 18 09:09:53 2007 -0700 |
| |
| MPC83xx: Fix makefile to generate config.h file in the build directory |
| |
| MPC83xx: Fix the Makefile config sections to generate the include/config.h |
| file in the build directory instead of the source directory. |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 1ded0242e437259366792d52b7e9d1e1931d8fa5 |
| Author: Lee Nipper <Lee.Nipper@freescale.com> |
| Date: Thu Jun 14 20:07:33 2007 -0500 |
| |
| mpc83xx: Add support for 8360 silicon revision 2.1 |
| |
| This change adds 8360 silicon revision 2.1 support to u-boot. |
| |
| Signed-off-by: Lee Nipper <lee.nipper@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Aug 8 04:14:28 2007 -0500 |
| |
| Treat ppc64 host as ppc |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0dc4279b08ff82472bec2e2c90858602459febe8 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 8 09:01:46 2007 +0800 |
| |
| Minor fix for bios emulator makefile |
| |
| Add $(obj) to LIB avoiding objects be built in the source dir |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 8 08:33:11 2007 +0800 |
| |
| Add CONFIG_BIOSEMU define to guard all the bios emulator code |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| This patch fix the compile issue on the board that did not enable the bios emulator |
| |
| commit ed8106433522f2ea8933e9808346860d061d7731 |
| Author: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Date: Tue Jul 31 12:27:25 2007 -0500 |
| |
| tsec: fix multiple PHY support |
| |
| The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx" |
| broke multiple PHY support in tsec.c. This fixes it. |
| |
| Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 09:08:18 2007 -0500 |
| |
| tsec: Allow Ten Bit Interface address to be configurable |
| |
| Allow the address of the Ten Bit Interface (TBI) to be changed in the |
| event of a conflict with another device. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 8 09:54:26 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a41de1f0d373e09c782dea558385a06247111ba5 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 05:15:18 2007 -0500 |
| |
| Port enabled for I2C signals and chipselects port configuration. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 04:31:18 2007 -0500 |
| |
| Added NAND support |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit eaf9e447beb3e498818ef8ad0b8c1597cd506149 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 04:11:20 2007 -0500 |
| |
| Added I2C support |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 99c03c175d2689093176facf17c58ce2cb320001 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:58:52 2007 -0500 |
| |
| Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:55:21 2007 -0500 |
| |
| Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:43:30 2007 -0500 |
| |
| Moved sync() from board file to include/asm-m68k/io.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:30:44 2007 -0500 |
| |
| Declared attributes of void __mii_init(void) as an alias for int mii_init(void) |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 9998bd37ead85e93953559720710d3b0685c81e6 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:19:10 2007 -0500 |
| |
| Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Tue Aug 7 16:17:06 2007 +0800 |
| |
| Add CONFIG_BIOSEMU define to guard all the bios emulator code |
| |
| This patch fix the compile issue on the board that did not enable the bios emulator |
| |
| commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 7 16:02:13 2007 +0200 |
| |
| Fix missing brace error in fs/fat/fat.c |
| [pointed out by Roderik Wildenburg] |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 706714d97a0d08d59eda4de2268c39f504688329 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:41:53 2007 +0200 |
| |
| [FIX] remove cute code |
| |
| commit f500d9fdeb576288656dac427052ad2c5ca0ad1a |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:35:26 2007 +0200 |
| |
| [FIX] Fix romfs code |
| |
| commit ab4b956d3143f8f8174089053f5dfabbb04762b0 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:31:49 2007 +0200 |
| |
| [FIX] Coding style cleanup - Wolfgang's suggestions |
| |
| commit 6c33c78557ca6f8da68c01ce33e278695197d3f4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 23:21:05 2007 +0200 |
| |
| Fixed typo in README (pointed out by Martin Jost). |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 537223afa61f64480df31ce440a9cb386df4a814 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Aug 6 21:10:17 2007 +0200 |
| |
| ppc4xx: Update AMCC Bamboo README doc/README.bamboo |
| |
| As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>, |
| here an updated Bamboo README. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9c7e4b06214db61bb21f1bcbe57c97519669baae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 02:17:36 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 221838cc7eb178370ff62aa05920a582e12ac322 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Tue Jul 10 09:03:22 2007 +0800 |
| |
| Remove the bios emulator from MAI board. |
| |
| The bios emulator in the MAI board can not pass compile |
| and have a lot of crap in it. remove it and will have a |
| clean and small bios emulator in the drivers directory |
| which can be uesed for every board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5618332409bb96f4448d1712899369fc80c0b489 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 13 12:14:59 2007 +0800 |
| |
| Fix some compile issues for MAI board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 0f460a1ee148b648ee242c3157650287d4296260 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 13 12:14:58 2007 +0800 |
| |
| Configurations for ATI video card BIOS emulator |
| |
| This patch add definition of the BIOS emulator and the ATI framebuffer |
| driver for MPC8641HPCN board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit ece92f85053b8df613edcf05b26a416cbc3d629c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 6 08:34:56 2007 +0800 |
| |
| This is a BIOS emulator, porting from SciTech for u-boot, mainly for |
| ATI video card BIOS. and can be used for x86 code emulation by some |
| modifications. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5072188acabde3178fac7f5a597150e6e74fd40c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 6 08:33:33 2007 +0800 |
| |
| This is a framebuffer driver for ATI video card, can work for PCI9200, |
| X300, X700, X800 ATI video cards. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5728be389e65fd47f34b33c2596271eb4db751ae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 01:01:49 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8092fef4c29b395958bb649647da7e3775731517 |
| Author: Martin Krause <Martin.Krause@tqs.de> |
| Date: Tue Dec 12 14:26:01 2006 +0100 |
| |
| Add functions to list of exported functions |
| |
| Additionally export the following fuctions (to make trab_config build again): |
| - simple_strtol() |
| - strcmp() |
| |
| Also bump the ABI version to reflect this change |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 63cec5814fab5d2b1c86982327433807a5ac0249 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 2 14:09:49 2007 -0500 |
| |
| Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts. |
| |
| All of the PCI/PCI-Express driver and initialization code that |
| was in the MPC8641HPCN port has now been moved into the common |
| drivers/fsl_pci_init.c. In a subsequent patch, this will be |
| utilized by the 85xx ports as well. |
| |
| Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. |
| |
| Also enable the second PCI-Express controller on 8641 |
| by getting its BATS and CFG_ setup right. |
| |
| Fixed a u16 vendor compiler warning in AHCI driver too. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a274ca4f6d68830e7c916f897561cff8c4101c38 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 22:33:05 2007 +0200 |
| |
| [FIX] Coding style cleanup |
| |
| commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 16:13:31 2007 +0200 |
| |
| [FIX] Xilinx Uartlite driver |
| Because PPC405 can use UARTLITE serial interface and |
| Microblaze can use Uart16550 serial interface not only Uartlite. |
| |
| commit 98889edd50aadf862071eb5664747ad0d568a20e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 15:54:53 2007 +0200 |
| |
| [FIX] Change configuration for XUPV2P Microblaze board |
| |
| commit 537091b4eed9302865d03fef3f7212b4fe5cf28f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 15:53:50 2007 +0200 |
| |
| [PATCH] Added support for Xilinx Emac community driver |
| |
| commit 86b116b1b1e165ca4840daefed36d2e3b8460173 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Aug 3 12:08:16 2007 +0200 |
| |
| cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. |
| |
| Add the ability for modules from the Schindler cm5200 family to use a |
| single U-Boot image: |
| - rename cm1_qp1 to cm5200 |
| - add run-time module detection |
| - parametrize SDRAM configuration according to the module we are running on |
| |
| Few minor, board-specific fixes included in this patch: |
| - better MAC address handling |
| - updated default environment ('update' command uses +{filesize} now) |
| - improved error messages in the auto-update code |
| - allow booting U-Boot from RAM (CFG_RAMBOOT) |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Aug 3 04:05:25 2007 -0500 |
| |
| Add Marvell 1149 PHY support to the TSEC |
| |
| commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 21:27:46 2007 +0200 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 63e22764d2f8653f68888c667eb65b3996b52680 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 10:11:18 2007 +0200 |
| |
| Minor cleanup of <board>_nand build rules. |
| |
| commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 2 08:33:56 2007 +0200 |
| |
| ppc4xx: Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c92409812206ac67a7fa7aae298539a9c3804a46 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Jul 31 18:51:48 2007 +0200 |
| |
| [ppc440SPe] Graceful recovery from machine check during PCIe configuration |
| |
| During config transactions on the PCIe bus an attempt to scan for a |
| non-existent device can lead to a machine check exception with certain |
| peripheral devices. In order to avoid crashing in such scenarios the |
| instrumented versions of the config cycle read routines are introduced, so |
| the exceptions fixups framework can gracefully recover. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit dec99558b9ea75a37940d07f41a3565a50b54ad1 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jul 31 18:19:54 2007 +0200 |
| |
| [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A |
| |
| This brings back separate settings for PCIe bus numbers depending on chip |
| revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa |
| commit. 440SPe rev. A does NOT work properly with the same settings as for |
| the rev. B (no devices are seen on the bus during enumeration). |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 00:48:45 2007 +0200 |
| |
| Fix build errors and warnings / code cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68 |
| Author: Eugene OBrien <eugene.obrien@advantechamt.com> |
| Date: Tue Jul 31 10:24:56 2007 +0200 |
| |
| ppc4xx: Update AMCC Bamboo 440EP support |
| |
| Changed storage type of cfg_simulate_spd_eeprom to const |
| Changed storage type of gpio_tab to stack storage |
| (Cannot access global data declarations in .bss until afer code relocation) |
| |
| Improved SDRAM tests to catch problems where data is not uniquely addressable |
| (e.g. incorrectly programmed SDRAM row or columns) |
| |
| Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules |
| Fixed AM29LV320DT (OpCode Flash) sector map |
| |
| Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 31 08:37:01 2007 +0200 |
| |
| ppc4xx: Update 440EPx lwmon5 board support |
| |
| - Clear ECC status regs after ECC POST test |
| - Set dcbz for ECC generation with caches enabled as default |
| - Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 30 11:04:57 2007 +0200 |
| |
| ppc4xx: Only print ECC related info when the error bis are set |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e36220a4baf1f188ba60f17e9d0f043069b1362a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jul 27 16:44:31 2007 +0200 |
| |
| new FPGA image for PLU405 board |
| |
| new FPGA image for PLU405 board with improved CompactFlash timing |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jul 27 14:43:59 2007 +0200 |
| |
| [ADS5121] Support for the ADS5121 board |
| |
| The following MPC5121e subsystems are supported: |
| |
| - low-level CPU init |
| - NOR Boot Flash (common CFI driver) |
| - DDR SDRAM |
| - FEC |
| - I2C |
| - Watchdog |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| |
| commit 1863cfb7b100ba0ee3401799457a01dc058745f8 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jul 27 14:22:04 2007 +0200 |
| |
| [PPC] Remove unused MSR_USER definition |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit d4024bb72dd81695ec099b2199eda0d27c623e62 |
| Author: John Otken <john@softadvances.com> |
| Date: Thu Jul 26 17:49:11 2007 +0200 |
| |
| ppc4xx: Add support for AMCC 405EP Taihu board |
| |
| Signed-off-by: John Otken <john@softadvances.com> |
| |
| commit b66091de6c7390620312c2501db23d8391e7cabb |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Jul 26 15:08:01 2007 +0200 |
| |
| ppc4xx: lwmon5: Update Lime initialization |
| |
| Change Lime SDRAM initialization to now support 100MHz and |
| 133MHz (if enabled). Also the framebuffer is initialized to |
| display a blue rectangle with a white border. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9f24a808f17fc0f37b7fb4805f734741335caecc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 24 09:52:52 2007 +0200 |
| |
| ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added |
| |
| The used Intel NOR FLASH chips have internally two dies, and are now |
| treated as two seperate chips. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aedf5bde179ecfbd0a96130d18996a96518b785f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 24 07:20:09 2007 +0200 |
| |
| ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...) |
| |
| As suggested by Hakan Eryigit, here an updated setup for the lwmon5 |
| interrupt controller. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a71d96eac8130b53a91f93cd10c70fca0db18d52 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 20 15:03:44 2007 +0200 |
| |
| ppc4xx: Fix bug with default GPIO output value |
| |
| As spotted by Matthias Fuchs, the default output values for all GPIO1 |
| outputs were not setup correctly. This patch fixes this issue. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 531e3e8b831f357056448fa573137d5fb37000fd |
| Author: Pavel Kolesnikov <concord@emcraft.com> |
| Date: Fri Jul 20 15:03:03 2007 +0200 |
| |
| POST: Add ECC POST for the lwmon5 board |
| |
| This patch adds ECC Post test for the Lwmon5 board based |
| on PPC440EPx to U-Boot. |
| |
| Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> |
| Acked-by: Yuri Tikhonov <yur@emcraft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit cc3023b9f95d7ac959a764471a65001062aecf41 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Thu Jul 19 17:12:28 2007 +0200 |
| |
| Fix breakage of 8xx boards from recent commit. |
| |
| This patch fixes the negative consequences for 8xx of the recent |
| "ppc4xx: Clean up 440 exceptions handling" commit. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit c883f6ea32dce91f07670b3aafecf6c99b1e5341 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 13:11:12 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:02:12 2007 +0200 |
| |
| ppc4xx: Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:01:38 2007 +0200 |
| |
| ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:00:43 2007 +0200 |
| |
| ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c |
| |
| The new boardspecific DDR2 controller configuration is used for the Yucca |
| board. Now the Yucca board with 440SPe Rev. A chips is also supported. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 09:57:00 2007 +0200 |
| |
| ppc4xx: Add new weak functions to support boardspecific DDR2 configuration |
| |
| The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better |
| support non default, boardspecific DDR(2) controller configuration. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5743a9207a370b90f09b20ebd61167c806b937f3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 08:53:51 2007 +0200 |
| |
| ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup |
| |
| The new function remove_tlb() can be used to remove the TLB's used to |
| map a specific memory region. This is especially useful for the DDR(2) |
| setup routines which configure the SDRAM area temporarily as a cached |
| area (for speedup on auto-calibration and ECC generation) and later |
| need this area uncached for normal usage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Jul 16 00:31:07 2007 +0200 |
| |
| [PATCH] Support for Xilinx EmacLite controller |
| |
| commit 3a6cab844cf74f76639d795e0be8717e02c86af7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jul 14 22:51:02 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 13:11:28 2007 +0200 |
| |
| [FIX] support for simply measuring time |
| |
| commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 12:41:23 2007 +0200 |
| |
| [FS] Added support for ROMFS |
| |
| commit 011595307731a7a67a7445d107c279d031e8ab97 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sat Jul 14 01:06:58 2007 +0200 |
| |
| [PCS440EP] - fix compile error, if BUILD_DIR is used |
| |
| commit 5a2f1098d81ad58b309e5e558d0492643166a799 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 00:18:48 2007 +0200 |
| |
| [PATCH] Support time without timer |
| |
| commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 13 21:43:55 2007 +0200 |
| |
| [PATCH] Remove problem with disabled BARREL SHIFTER |
| |
| commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 13 21:41:44 2007 +0200 |
| |
| [FIX] correct help for rspr |
| |
| commit fad63407154f46246ce80d53a9c669a44362ac67 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jul 13 09:54:17 2007 +0200 |
| |
| make show_boot_progress () weak. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 907902472391b6ca1876ec300687562ecaf459b1 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jul 13 08:26:05 2007 +0200 |
| |
| [PCS440EP] - The DIAG LEDs are now blinking, if an error occur |
| - fix compile error, if BUILD_DIR is used |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 12 16:32:08 2007 +0200 |
| |
| ppc4xx: Change receive buffer handling in the 4xx emac driver |
| |
| This change fixes a bug in the receive buffer handling, that |
| could lead to problems upon high network traffic (broadcasts...). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 12 01:45:34 2007 +0200 |
| |
| Update CHANGELOG, minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Jun 8 16:41:18 2007 -0500 |
| |
| Remove erroneous errata code from Marvel 88E1111S driver |
| |
| The Marvel 88E1111S driver for the TSEC was copied from the |
| 88E1101 driver, and included a fix for an erratum which does not |
| exist on that part. Now it is removed |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 982efcf23fd03647e01e2fbe28a7a36239156cc0 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Jun 5 16:38:44 2007 -0500 |
| |
| From: eran liberty <eran.liberty@gmail.com> |
| |
| adds the reset register to 85xx immap |
| |
| Signed-off-by: Eran Liberty <eran.liberty@gmail.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Thu May 10 17:50:01 2007 -0500 |
| |
| Polished the 85xx ADS config files |
| |
| Made the boot commands use device trees by default. |
| Also moved the ramdisk to 1000000 (I think the previous address |
| was getting overridden during boot). |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed May 9 11:03:32 2007 -0500 |
| |
| 8544ds: Fix Makefile after moving pixis to board/freescale. |
| |
| The OBJTREE != SRCTREE build scenario was broken. |
| This fixes it. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed May 9 00:54:20 2007 -0500 |
| |
| tsec: Fix PHY code to match first driver |
| |
| Jarrold Wen noticed that the generic PHY code always matches |
| under the current implementation. Change it so the first match |
| wins, and *only* unknown PHYs trigger the generic driver |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ccc091aac61a38cd998d575d92f7232e256d6312 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue May 8 17:27:43 2007 -0500 |
| |
| Add support for CPM device tree configuration to 8560 ADS |
| |
| * Adds code to modify CPM frequencies |
| * Cleans up the config file to #define TSEC and (for now) #undef FCC |
| * Adds the MII command for all 8560 ADS configurations |
| * Updates config file to provide convenience commands for booting |
| with a device tree |
| |
| Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue May 8 17:23:02 2007 -0500 |
| |
| Fix Marvell 88e1145 PHY init code |
| |
| Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver |
| where the reset was being done after the errata code instead of |
| before. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 5dc210dec5bace98a50b6ba905347890091a9bb0 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:16 2007 -0500 |
| |
| Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit e8b85f3ba4cd8930e0a2fea2100c815d64201765 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:08 2007 -0500 |
| |
| pciauto setup bridge |
| |
| The P2P bridge bus numbers programmed into the device are relative to |
| hose->first_busno. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 571f49fa717004ca4268b4e24057efc7bf9f987b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:01 2007 -0500 |
| |
| Support PCIe extended config registers |
| |
| FSL PCIe block has extended cfg registers in the 100 and 400 range. |
| For example, to read the LTSSM register: pci display <busn>.0 404 1 |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit ba5feb12581bb2912ce301e4866b71f846e9fc07 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:51:48 2007 -0500 |
| |
| Minor improvements to drivers/pci_auto.c |
| |
| - Make pciauto_{pre,post}scan_setup_bridge non-static |
| - Added physical address display in debug messages. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 40e81addab7bb74d20ddf681ce9babc880a828ee |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:51:35 2007 -0500 |
| |
| Start pci hose scan from hose->current_busno. |
| |
| Ensure hose->current_busno is not less than first_busno. This fixes |
| broken board code which leaves current_busno=0 when first_busno is |
| greater than 0 for the cases with multiple controllers. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 3865b1fb7843a08ad49a6319a36415752276ff48 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 11 12:13:53 2007 +0200 |
| |
| Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fa1df308926a6f70e3504c57514ef27ac31fd13a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Jul 11 20:11:07 2007 +0200 |
| |
| CM1.QP1: Support for the Schindler CM1.QP1 board. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 96e1d75be8193ca79e4215a368bf9d7f2362450f |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Wed Jul 11 18:39:11 2007 +0200 |
| |
| [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed |
| - now the Flash ST M29W040B is supported (not tested) |
| - fix the "led" command |
| - fix compile error, if BUILD_DIR is used |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Jul 8 13:44:27 2007 +0200 |
| |
| Fix malloc problem introduced with the relocation fixup for the PPC platform |
| |
| The relocation fixup didn't handle the malloc pointer initialization |
| correctly. This patch fixes this problem. Tested successfully on 4xx. |
| The relocation fixup patches for 4xx will follow soon. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dca874db62718e41253659e60f3a1de7eb418ce |
| Author: TsiChung <tcliew@Goku.(none)> |
| Date: Tue Jul 10 15:45:43 2007 -0500 |
| |
| Cache update and added CFG_UNIFY_CACHE |
| |
| Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. |
| |
| Signed-off-by: TsiChung <tcliew@Goku.(none)> |
| |
| commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:36:16 2007 -0500 |
| |
| Update header file. Include dtimer_intr_setup(). Changed timer divider to global define. |
| |
| Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:31:25 2007 -0500 |
| |
| Update header files |
| |
| Include immap.h and renamed mcfrtc.h to rtc.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2870e98ac8e5553e9187b12a47e5f46babb53990 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:29:21 2007 -0500 |
| |
| Add mcffec_initialize() |
| |
| Added mcffec_initialize() in eth_initialize() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:27:40 2007 -0500 |
| |
| Update header file and clean up |
| |
| Include immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 0cee9c66318602c856a899ae5fa7579ccba6443a |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:23:15 2007 -0500 |
| |
| New uart structure and defines |
| |
| Seperated from mcfuart.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a90e79de8d99e9c9d69d60bfff9f24c337165900 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:22:31 2007 -0500 |
| |
| New timer structure and defines |
| |
| Seperated from mcftimer.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit e04acb2eba4782489417240eff76e20e176aec10 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:21:09 2007 -0500 |
| |
| Rename mcfrtc to rtc |
| |
| Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:17:36 2007 -0500 |
| |
| Rename mcfserial.c. Update include header |
| |
| Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:13:58 2007 -0500 |
| |
| Header file update, clean up and cache handling |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:10:40 2007 -0500 |
| |
| Create interrupts.c and modify Makefile |
| |
| interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ddd104f1ed655eda50c06ba636237a83ed943f34 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:06:55 2007 -0500 |
| |
| Enable Icache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b9bf3de377b2bae70c983c9b97feae914999e735 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:05:31 2007 -0500 |
| |
| Update header file and some clean up |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 84a015b52ec820a5ae173717d78516de731c89c2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:03:28 2007 -0500 |
| |
| Update header file and enable icache |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r(). |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7a17e759c7a8b58e910daf54df611e94fc8ca074 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:01:22 2007 -0500 |
| |
| Update header file and removed interrupt_init() |
| |
| Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 3b635492c95bd0d6e08f93f699821cba1f602a64 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:57:46 2007 -0500 |
| |
| Update for flash.o and mii.o |
| |
| Removed flash.o and added mii.o |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c5ded275d839e4ff79f41718d50a835d989f57bc |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:56:19 2007 -0500 |
| |
| MII functions calls. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 427c814104560e29bda14955c67703245aaaa5b4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:54:42 2007 -0500 |
| |
| Removed MII functions and replaced immap_5329.h and m5329.h with immap.h. |
| |
| The removed MII routines will be placed in mii.c. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:51:05 2007 -0500 |
| |
| Duplicate code |
| |
| There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2744354a8437b8f78db178e30660215688bff570 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:46:38 2007 -0500 |
| |
| Seperate old structure defines and new structure defines |
| |
| Removed new uart structure and defines to uart.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:45:01 2007 -0500 |
| |
| Seperate old structure defines and new structure defines |
| |
| New timer structure and defines will move to new timer.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:42:23 2007 -0500 |
| |
| Clean up |
| |
| Removed whitespace |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:41:24 2007 -0500 |
| |
| Clean up |
| |
| Replaced whitespace with tabs |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:39:07 2007 -0500 |
| |
| Create new header file and move peripherals base address from configs file to new header file. |
| |
| Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit be296e31c4411f96d9cb3d2afc8fcb006867abfa |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:24:58 2007 -0500 |
| |
| Revert file mode |
| |
| Changed MAKEALL file mode to executable, removed executable file mode from Makefile |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:19:50 2007 -0500 |
| |
| disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ddb5d86f0215bcb6c293510c50eb050e92883b7a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:13:21 2007 -0500 |
| |
| drivers/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f40a7f3e3888b42a43674b099e5470022c8c544c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:07:56 2007 -0500 |
| |
| fs/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:05:02 2007 -0500 |
| |
| net/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 902531788376046da212afd1661cffb62f3daa1c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:02:44 2007 -0500 |
| |
| common/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d39b57415838c73fb0a37eca84de3c68ba990586 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:48:22 2007 -0500 |
| |
| board/[j-z]*: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 77a318545d57aefa844752465b94c7e09a3f26d0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:39:10 2007 -0500 |
| |
| board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:27:39 2007 -0500 |
| |
| cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 079a136c3588814784561d6e4856970ee82d6e2a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:12:10 2007 -0500 |
| |
| include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:38:02 2007 -0500 |
| |
| include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 80ff4f99b84b64edca3fd10da365ec1493be1c95 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:29:01 2007 -0500 |
| |
| include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:22:23 2007 -0500 |
| |
| include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 659e2f6736232a08acca8785c206e2b4d9cd07d7 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:10:49 2007 -0500 |
| |
| include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:02:57 2007 -0500 |
| |
| include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 22:08:34 2007 -0500 |
| |
| Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK! |
| |
| All of the choices for CONFIG_BOOTP_ are now documented in |
| the README file. You must now individually select exactly |
| the set that you want using a series of |
| #define CONFIG_BOOTP_<x> |
| statements in the board port config files now. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d3b8c1a743dcd31625c99e6a44590f207eb00028 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:57:31 2007 -0500 |
| |
| include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2fd90ce575b02d189cbf443c85309bcd001aa393 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:48:26 2007 -0500 |
| |
| include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 37d4bb70586659dedef1658ce1bed071be098aec |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:38:02 2007 -0500 |
| |
| include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 18225e8dd1950bd6dbf35011e436db7f474c187d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:31:24 2007 -0500 |
| |
| include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:24:19 2007 -0500 |
| |
| include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:16:53 2007 -0500 |
| |
| include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:12:30 2007 -0500 |
| |
| Retire CONFIG_COMMANDS finally. |
| Strip old CFG_CMD_* symbols out. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b5501f7d720fed99ab0b42c83f5dea52868ce007 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:10:03 2007 -0500 |
| |
| Update README.* to reference new CONFIG_CMD_* names now. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:06:00 2007 -0500 |
| |
| cpu/m*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:57:22 2007 -0500 |
| |
| cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ab3abcbabd840928fb1eb5122118ca466b5e5013 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:45:16 2007 -0500 |
| |
| board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:38:39 2007 -0500 |
| |
| board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c508a4cefd8a953fc64957650506a035e6e3d9d1 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:31:28 2007 -0500 |
| |
| board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b9307262f8a9f3b5c9e15a6067eadc17407146f6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:24:55 2007 -0500 |
| |
| board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fcec2eb93e126400009729328e797f12bc94f1fd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:19:09 2007 -0500 |
| |
| board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a593814f2be0c9cdc3133cd550b167b8a988328f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:10:50 2007 -0500 |
| |
| rtc/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 67350568f9d46e66c21829f3513b3db0caeb948b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:05:38 2007 -0500 |
| |
| lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7def6b34f910f08d7ef0a14646da067719237ca2 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:02:11 2007 -0500 |
| |
| lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:56:50 2007 -0500 |
| |
| fs/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c91898bbc505aff3e12a807af88e76da18efb7ee |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:46:09 2007 -0500 |
| |
| tools/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:45:14 2007 -0500 |
| |
| net/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb51c0bf88f95a1bca68324b0126f8eed8b43273 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:39:42 2007 -0500 |
| |
| drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:30:01 2007 -0500 |
| |
| drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:22:37 2007 -0500 |
| |
| disk/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 639221c76c88215bd55af83ad174fc30d1940f8f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:15:49 2007 -0500 |
| |
| include/: Remove obsolete references to CONFIG_COMMANDS |
| Mostly removed from comments here. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jul 10 00:01:28 2007 +0200 |
| |
| Coding style cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c8603cfbd4573379a6076c9c208545ba2bbf019a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 9 11:00:24 2007 +0200 |
| |
| Small coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:08 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| Remove unused CFG_NAND_LEGACY define |
| |
| These boards to not have NAND. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:06 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| -cleanup |
| -use correct io accessors (in/out_be32()) |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit e09f7ab5749c345f924da272bea0521a73af5b11 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:04 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| This patch prepares the migration from the legacy NAND driver |
| to U-Boot's new NAND subsystem for esd boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c3517f919d0f61650cf3027fd4faf0f631142f6c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:10:08 2007 -0500 |
| |
| common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:05:39 2007 -0500 |
| |
| common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c76fe47425afc7d5d670ff0539823c85d65d9c42 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:02:23 2007 -0500 |
| |
| common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit baa26db4113679b80970ff447d91cc10217742a6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 17:51:39 2007 -0500 |
| |
| common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 17:02:01 2007 -0500 |
| |
| Clear up confusion over the CMD_POST and POST_DIAG mess. |
| |
| For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG |
| when it really means just CONFIG_CMD_DIAG. There is no CMD_POST. |
| Clear this mess up some. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b3631487105a57ab7cbadfc26efbaf9676275018 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:45:08 2007 -0500 |
| |
| Remove references to the old cmd_confdefs.h include file. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:42:59 2007 -0500 |
| |
| include/configs: Catch some CONFIG_CMD_* conversion stragglers. |
| |
| Use new CONFIG_CMD_* in lwmon5.h board config file. |
| Fix CONFIG_CMD_* typo braindamage in omap1510inn.h |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a5562901661bd428f7e5feb333f796372cb81019 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:31:57 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:02:44 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various S* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e9a0f8f15c11f337967aa0600ad6e8af33037f50 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:12:40 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various R* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:55:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various Q* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:49:44 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various P* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e18a1061a8630cb67995fdf99afd3fb50d1b187d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:21:43 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:14:17 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various M* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 348f258f24253433e4a2302a0bbceb6740a67246 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 13:46:18 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 10:09:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various H* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 60a0876b5106b34220e459c208bbf648073306c0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 21:04:26 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit dcaa71562826a2466e894c868d132509dcda8444 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 20:56:05 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various E* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3c3227f3c737502311b25b72084573901cbbf17d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 20:40:43 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various D* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:52:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various C* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit de8b2a6e33298dcdb10bdda48db25e53c3089eba |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:32:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various B* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 498ff9a228485bd4b9f23d066bada268f9add1dd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:13:52 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various A* named board config files. |
| |
| Since ADS860.h includes "board/fads/fads.h" with ramifications |
| on the CONFIG_COMMAND treatment, it too has to be adjusted to |
| exclude already configured commands in this same commit. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 10e038932f22ee80ebd53de312531e70e6590a2f |
| Author: Thomas Knobloch <knobloch@siemens.com> |
| Date: Fri Jul 6 14:58:39 2007 +0200 |
| |
| [NAND] Bad block skipping for command nboot |
| |
| The old implementation of command nboot does not support reading the image from |
| NAND flash with skipping of bad blocks. The patch implements a new version of |
| the nboot command: by calling nboot.jffs2 from the u-boot command line the |
| command will load the image from NAND flash with respect to bad blocks (by using |
| nand_read_opts()). This is similar to e.g. the NAND read command: "nand |
| read.jffs2 ...". |
| |
| Signed-off-by: Thomas Knobloch <knobloch@siemens.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 12:26:51 2007 +0200 |
| |
| ppc4xx: Update lwmon5 default environment |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5d187430a055d62f17ca84d75e7245439d1f7e75 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 11:48:24 2007 +0200 |
| |
| ppc4xx: Update lwmon5 board |
| |
| Add unlock=yes environment variable to default variables to unlock |
| the CFI flash by default. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 09:45:47 2007 +0200 |
| |
| Fix problem with get/setdcr commands introduced by cfg patches |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jul 6 02:50:19 2007 +0200 |
| |
| Code cleanup and default config update for STC GP3 SSA board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e4dbe1b215f5c6c462e76909d240bd96472b84de |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 5 17:56:27 2007 +0200 |
| |
| Fixing some typos etc. introduced mainly by cfg patches. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 5 11:12:16 2007 +0200 |
| |
| Minor coding style cleanup. Update CHANGELOG. |
| |
| commit dca3b3d6d6396b67e5e84af53452164923c73443 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:46 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:38 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:30 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various s* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:23 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 26a34560d56a9df5bc2ae23525d9229736134757 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:17 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various p* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a5cb23092a7d31490a33d4ec871468b63babfa3c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:13 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various o* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 929a2bfd142737003a8fc32e1b86e1f2c1850257 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various n* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5dc11a511960d490f7f01ffd746edfe6277f99b0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:01 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various m* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:57 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various l* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit bc234c129fa04fb9fa33530930e5cbc6084cd47a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:51 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:32 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various i* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 48d5d102a2f2e619c92050b9aedbb69689185bc0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:25 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various h* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:19 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various g* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:10 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various e* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:03 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various d* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:56 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various c* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:49 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various b* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0b361c916617aff79e647b40f0e43361e0bbaccf |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:42 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various a* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b730cda82e362df6a22f4c59c0a9b97e885b1014 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in mpc5xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d794cfefead5fc177cf4f41164e80382e9c9484a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:15 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various 5200 board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in STx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:58 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in sbc* board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2694690e285acaa34922f55f4b5ae030da60c55a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:50 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in TQM board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1cc4c458329765b58e584a19821e796b3c10e976 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:28 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 82xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:06 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 83xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b44896215a09c60fa40cae906f7ed207bbc2c492 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Thu Jul 5 08:17:37 2007 +0200 |
| |
| Merged POST framework with the current TOT. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit b24629fa377214d63bb40d1360e354b6d3e4af56 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:23:15 2007 -0500 |
| |
| mpc86xx: Remove old CFG_CMD_* references. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:22:54 2007 -0500 |
| |
| Add MPC8568MDS to MAKEALL 85xx target. |
| |
| It was missing from the original port submission. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2835e518c969e5124ba1174eef3e8375e12fa7d5 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:22:08 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 85xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 56b304ac2091689506088a9ae67f63fd6300cf16 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:21:37 2007 -0500 |
| |
| Fix #if typo in CONFIG_CMD_* changes. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f780b83316d9af1f61d71cc88b1917b387b9b995 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Wed Jun 27 18:11:38 2007 +0200 |
| |
| resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| |
| commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 4 10:06:30 2007 +0200 |
| |
| ppc4xx: Update lwmon5 board |
| |
| - Add optional ECC generation routine to preserve existing |
| RAM values. This is needed for the Linux log-buffer support |
| - Add optional DDR2 setup with CL=4 |
| - GPIO50 not used anymore |
| - Lime register setup added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6810a34677dbc446334f5e451f1682426dd33b49 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:17:28 2007 -0600 |
| |
| Fix Makefile to use $(MKCONFIG) macro for all board ports |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:17:28 2007 -0600 |
| |
| Fix Makefile to use $(MKCONFIG) macro for all board ports |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 057004f4a4863554d56cc56268bfa7c7d9738e27 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:49 2007 -0600 |
| |
| Correct fixup relocation for mpc83xx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:44 2007 -0600 |
| |
| Correct fixup relocation for mpc8260 |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f3a52fe05923935db86985daf9438e2f70ac39aa |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:39 2007 -0600 |
| |
| Correct fixup relocation for mpc824x |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:34 2007 -0600 |
| |
| Correct fixup relocation for mpc8220 |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:29 2007 -0600 |
| |
| Correct fixup relocation for MPC5xxx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 3649cd99ba815b6601868735765602f00ef3692b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:24 2007 -0600 |
| |
| Correct relocation fixup for mpc5xx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:19 2007 -0600 |
| |
| Don't set gd->reloc_off if relocation of .fixup works correctly |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:14 2007 -0600 |
| |
| Remove obsolete mpc83xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:09 2007 -0600 |
| |
| Consolidate mpc8260 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:04 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f94a3aecebc40ca0939c7d66d010009cf51be9e2 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:59 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (3 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a71c084f3ac7fedf144537db2b2da47323068833 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:53 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (2 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f670a15468d1365241d40022b9408e1004181f5e |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:48 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (1 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 09555bd45a04c0e54f172528d21bc18896550d28 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:43 2007 -0600 |
| |
| Remove obsolete mpc8220 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5efb992f046e51225c93d52f80fecbe433abd789 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:38 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (3 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 07c13dfef65b31647e69d8b61daa1eec598add1a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:33 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (2 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b4f67513a624ce85866c66c575bd2d9d7977d7f0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:28 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (1 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b7d8e05f8675249b5f208aa73babeed384a4519d |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:23 2007 -0600 |
| |
| Remove obsolete mpc5xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:18 2007 -0600 |
| |
| Consolidate mpc83xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:13 2007 -0600 |
| |
| Consolidate mpc8260 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:08 2007 -0600 |
| |
| Consolidate mpc824x linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 9c757b789a59a855db57b448dd825329c4e9c4a0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:03 2007 -0600 |
| |
| Consolidate mpc8220 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit d181c9a15cd41863fe24840d17848429f27d3c8c |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:32:58 2007 -0600 |
| |
| Consolidate mpc5xxx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 287ac924adb7291bebe5086652a362a30ab28b13 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:32:53 2007 -0600 |
| |
| Consolidate mpc5xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 4 00:43:53 2007 +0200 |
| |
| Fix a few file permission problems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 4 00:38:38 2007 +0200 |
| |
| Minor coding style cleanup. Rebuild CHANGELOG file. |
| |
| commit 2f9c19e496acb6bb50d9299e1aab377625d48c38 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:44 2007 -0500 |
| |
| configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 602ad3b33d9ceef83dbab46be68646d645d637ee |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:39 2007 -0500 |
| |
| README: Rewrite command line config to use CONFIG_CMD_* names. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 72a074cec68e5bad60d63206c050974e08afd804 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:34 2007 -0500 |
| |
| include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:28 2007 -0500 |
| |
| tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9107ebe0d352420895ab69b715697bdebc8caf50 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:23 2007 -0500 |
| |
| board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5e378003d592ea828ec69d6defcd4de79096dd5c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:19 2007 -0500 |
| |
| board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 737184114ec9c9e0ab94d6713536126073bd2472 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:15 2007 -0500 |
| |
| cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f48070fe5fe440dfb5ee5268c920de70e48ea327 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:08 2007 -0500 |
| |
| cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:03 2007 -0500 |
| |
| lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 73f032021ec5f13cda8faa4e34b6de80960eb86f |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:58 2007 -0500 |
| |
| lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 98b79003c21c2578206003256de4e781d6b36ca8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:53 2007 -0500 |
| |
| rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6e2115acb6a892d53a6881bf253ae41d3df39156 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:49 2007 -0500 |
| |
| net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 45cdb9b72c94655c7308b464a2666057c0b286e0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:34 2007 -0500 |
| |
| disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:20 2007 -0500 |
| |
| fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d5be43de93ff905c465e509d45a3164ef48d26e7 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:10 2007 -0500 |
| |
| drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b453960d4fdb87b3970d96119b90df2ed024fc4a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:05 2007 -0500 |
| |
| common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:54 2007 -0500 |
| |
| common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a76adc8142c1d956385a109e0b70f9319ede4d66 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:43 2007 -0500 |
| |
| common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:34 2007 -0500 |
| |
| Introduce initial versions of new Command Config files. |
| |
| Derive three new files from cmd_confdefs.h: |
| config_bootp.h - Has BOOTP related config options, not commands |
| config_cmd_all.h - Has a CONFIG_CMD_* definition for every command |
| config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds. |
| |
| For now, include "config_bootp.h" for compatability until all |
| users of it directly include it properly. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1f2a05898658900dc5717761e27abf2052e67e13 |
| Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in> |
| Date: Sat Jun 30 18:50:48 2007 +0200 |
| |
| Fix S-ATA support. |
| |
| Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in> |
| |
| commit a5d71e290f3673269be8eefb4ec44f53412f9461 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Mon Jun 25 19:11:37 2007 +0200 |
| |
| [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b |
| Author: Niklaus Giger <niklaus.giger@nestal.com> |
| Date: Mon Jun 25 17:03:13 2007 +0200 |
| |
| ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt |
| |
| This patch prints the DDR status registers upon machine check |
| interrupt on the 440EPx/GRx. This can be useful especially when |
| ECC support is enabled. |
| |
| I added some small changes to the original patch from Niklaus to |
| make it compile clean. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 807018fb7faceb429ce0cb47baa2073746b33a4e |
| Author: Niklaus Giger <niklaus.giger@nestal.com> |
| Date: Mon Jun 25 16:50:55 2007 +0200 |
| |
| ppc4xx: Fix O=buildir builds |
| |
| This patch fixes the problem to assemble cpu/ppc4xx/start.S |
| experienced last week where building failed having specified |
| O=../build.sequoia. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| |
| commit 466fff1a7bb5fe764a06450626f6098219f446b8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 25 15:57:39 2007 +0200 |
| |
| ppc4xx: Add pci_pre_init() for 405 boards |
| |
| This patch removes the CFG_PCI_PRE_INIT option completely, since |
| it's not needed anymore with the patch from Matthias Fuchs with |
| the "weak" pci_pre_init() implementation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6f35c53166213c24a5a0e2390ed861136ff73870 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Jun 24 17:41:21 2007 +0200 |
| |
| ppc4xx: Maintenance patch for esd's CPCI405 derivats |
| |
| -add pci_pre_init() for pci interrupt fixup code |
| -disable phy sleep mode via reset_phy() function |
| -use correct io accessors |
| -cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Jun 24 17:23:41 2007 +0200 |
| |
| ppc4xx: Add pci_pre_init() for 405 boards |
| |
| This patch adds support for calling a plattform dependant |
| pci_pre_init() function for 405 boards. This can be used to |
| move the current pci_405gp_fixup_irq() function into the |
| board code. |
| |
| This patch also makes the CFG_PCI_PRE_INIT define obsolete. |
| A default function with 'weak' attribute is used when |
| a board specific pci_pre_init() is not implemented. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jun 22 23:59:00 2007 +0200 |
| |
| Coding stylke cleanup; rebuild CHANGELOG |
| |
| commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9 |
| Author: Igor Lisitsin <igor@emcraft.com> |
| Date: Wed Apr 18 14:55:19 2007 +0400 |
| |
| Adapt log buffer code to support Linux 2.6 |
| |
| A new environment variable, "logversion", selects the log buffer |
| behaviour. If it is not set or set to a value other than 2, then the |
| old, Linux 2.4.4, behaviour is selected. |
| |
| Signed-off-by: Igor Lisitsin <igor@emcraft.com> |
| -- |
| |
| commit a11e06965ec91270c51853407ff1261d3c740386 |
| Author: Igor Lisitsin <igor@emcraft.com> |
| Date: Wed Mar 28 19:06:19 2007 +0400 |
| |
| Extend POST support for PPC440 |
| |
| Added memory, CPU, UART, I2C and SPR POST tests for PPC440. |
| |
| Signed-off-by: Igor Lisitsin <igor@emcraft.com> |
| -- |
| |
| commit 566a494f592ae3b3c0785d90d4e1ba45574880c4 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jun 22 19:11:54 2007 +0200 |
| |
| [PCS440EP] upgrade the PCS440EP board: |
| - Show on the Status LEDs, some States of the board. |
| - Get the MAC addresses from the EEProm |
| - use PREBOOT |
| - use the CF on the board. |
| - check the U-Boot image in the Flash with a SHA1 |
| checksum. |
| - use dynamic TLB entries generation for the SDRAM |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 3a1f5c81b0b9557817a789bece839905581c2205 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 22 16:58:40 2007 +0200 |
| |
| ppc4xx: Fix problem with extended program_tlb() funtion |
| |
| The recently extended program_tlb() function had a problem when |
| multiple TLB's had to be setup (for example with 512MB of SDRAM). The |
| virtual address was not incremented. This patch fixes this issue |
| and is tested on Katmai with 512MB SDRAM. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jun 22 14:58:04 2007 +0200 |
| |
| [ppc] Fix build breakage for all non-4xx PowerPC variants. |
| |
| - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros |
| - minor 4xx cleanup |
| |
| commit d677b32855f577ae2690dcd64a172cdd706e0ffc |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Fri Jun 22 10:34:12 2007 +0200 |
| |
| [patch] add nand_init() prototype to nand.h |
| |
| since nand_init() is expected to be called by other parts of u-boot, there |
| should be a prototype for it in nand.h |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jun 20 18:14:24 2007 +0200 |
| |
| Coding style cleanup. Refresh CHANGELOG. |
| |
| commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 17:22:44 2007 +0200 |
| |
| ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board |
| |
| This patch adds a board command to configure the I2C bootstrap EEPROM |
| values. Right now 533 and 667MHz are supported for booting either via NOR |
| or NAND FLASH. Here the usage: |
| |
| => bootstrap 533 nor ;to configure the board for 533MHz NOR booting |
| => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df8a24cdd30151505cf57bbee5289e91bf53bd1b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 16:42:31 2007 +0200 |
| |
| [ppc4xx] Fix problem with NAND booting on AMCC Acadia |
| |
| The latest changes showed a problem with the location of the NAND-SPL |
| image in the OCM and the init-data area (incl. cache). This patch |
| fixes this problem. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 86ba99e34194394052d24c04dc40d1263d29a26f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 16:40:58 2007 +0200 |
| |
| [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jun 18 13:50:13 2007 -0500 |
| |
| Added M5329AFEE and M5329BFEE Platforms |
| |
| Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, |
| drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, |
| include/configs/M5329EVB.h, lib_m68k/interrupts.c, and |
| rtc/mcfrtc.c |
| |
| Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, |
| common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, |
| include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, |
| include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, |
| include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, |
| lib_m68k/time.c, net/eth.c and rtc/Makefile |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Jun 17 19:04:11 2007 +0200 |
| |
| [fix] email reparation |
| |
| commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Jun 17 19:03:21 2007 +0200 |
| |
| [FIX] fix microblaze file permitission |
| |
| commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 11:33:41 2007 +0200 |
| |
| [ppc4xx] Change lwmon5 port to work with recent 440 exception rework |
| |
| Now CONFIG_440 has to be defined in all PPC440 board config files. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit efa35cf12d914d4caba942acd5a6c45f217de302 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Jun 15 11:19:28 2007 +0200 |
| |
| ppc4xx: Clean up 440 exceptions handling |
| |
| - Introduced dedicated switches for building 440 and 405 images required |
| for 440-specific machine instructions like 'rfmci' etc. |
| |
| - Exception vectors moved to the proper location (_start moved away from |
| the critical exception handler space, which it occupied) |
| |
| - CriticalInput now serviced (with default handler) |
| |
| - MachineCheck properly serviced (added a dedicated handler and return |
| subroutine) |
| |
| - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, |
| unhandled and those not relevant for 4xx were eliminated) |
| |
| - Eliminated Linux leftovers, removed dead code |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 08:18:01 2007 +0200 |
| |
| [ppc4xx] Add initial lwmon5 board support |
| |
| This patch adds initial support for the Liebherr lwmon5 board euqipped |
| with an AMCC 440EPx PowerPC. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 85f737376d5ff3d5f0d45a8b657686326d175307 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 07:39:43 2007 +0200 |
| |
| [ppc4xx] Extend 44x GPIO setup with default output state |
| |
| The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup |
| is extended with the default GPIO output state (level). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dbca208518e5e7f01a6420588d1cd6e60db74c2b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jun 14 11:14:32 2007 +0200 |
| |
| [ppc4xx] Extend program_tlb() with virtual & physical addresses |
| |
| Now program_tlb() allows to program a TLB (or multiple) with |
| different virtual and physical addresses. With this change, now one |
| physical region (e.g. SDRAM) can be mapped 2 times, once with caches |
| diabled and once with caches enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Wed May 23 19:02:41 2007 +0200 |
| |
| Change 'repeatable' attribute of some commands to sensible values. |
| |
| Most prominently this changes 'erase' to be non-repeatable. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 5afb202093f6a001797db92cf695b93a70ea9ab4 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Wed May 23 18:47:48 2007 +0200 |
| |
| Fix 'run' not to continue after interrupted command |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 9b7464a2c88614e1061f509c48930a3d240d1a35 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Jun 11 15:14:24 2007 +0200 |
| |
| USB: This patch fix readl in ohci swap reg access. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Jun 8 14:52:22 2007 +0200 |
| |
| TQM5200: Add Flat Device Tree support, update default env. accordingly. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9045f33c023f698660a2e45d1b2194c0711abebc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jun 8 10:24:58 2007 +0200 |
| |
| Fix config problems on SC3 board; make ide_reset_timeout work. |
| |
| commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b |
| Author: Benoît Monin <bmonin@adeneo.eu> |
| Date: Fri Jun 8 09:55:24 2007 +0200 |
| |
| [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE |
| |
| Set the correct value in GPIOx_TCR when configuring the gpio |
| with CFG_440_GPIO_TABLE. |
| |
| Signed-off-by: Benoit Monin <bmonin@adeneo.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f539edc076cfe52bff919dd512ba8d7af0e22092 |
| Author: Vadim Bendebury <vbendeb@google.com> |
| Date: Thu May 24 15:52:25 2007 -0700 |
| |
| cosmetic changes to bcm570x driver |
| |
| This is a cosmetic only changes submission. |
| It affects files relevant to bcm570x driver. |
| the commands used to generate this change was |
| |
| cd drivers |
| Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h |
| |
| The BMW target (the only one using this chip so far) builds cleanly, the |
| `before and after' generated object files for drivers/bcm570x.c and |
| drivers/tigon3.o are identical as reported by objdump -d |
| |
| Signed-off-by: Vadim Bendebury <vbendeb@google.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jun 6 16:26:56 2007 +0200 |
| |
| Coding Style cleanup; generate new CHANGELOG file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:44 2007 +0200 |
| |
| TRAB, USB: update trab board configuration for use of generic ohci driver |
| |
| commit dace45acd1c1357daa9322099d07c9a9e08b0024 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:43 2007 +0200 |
| |
| USB: ohci fixes and cleanup for ppc4xx and yosemite board. |
| |
| commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:43 2007 +0200 |
| |
| USB: ohci fixes and cleanup for mpc5xxx and IceCube board config |
| |
| commit fc43be478f2aa37ce38acd85355038866e4162af |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:35 2007 +0200 |
| |
| USB/OHCI: endianness cleanup in the generic ohci driver |
| |
| commit c440bfe6d6d92d66478a7e84402b31f48413617b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jun 6 11:42:13 2007 +0200 |
| |
| ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board |
| |
| This patch adds NAND booting support for the AMCC Acadia eval board. |
| |
| Please make sure to configure jumper J7 to position 2-3 when booting |
| from NOR, and to position 1-2 when booting for NAND. |
| |
| I also added a board command to configure the I2C bootstrap EEPROM |
| values. Right now only 267MHz is support for booting either via NOR |
| or NAND FLASH. Here the usage: |
| |
| => bootstrap 267 nor ;to configure the board for 267MHz NOR booting |
| => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 18135125f909948b85d1d6881ab4ac0efb4a1c58 |
| Author: Rodolfo Giometti <giometti@linux.it> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| Files include/linux/byteorder/{big,little}_endian.h define |
| __BIG_ENDIAN and __LITTLE_ENDIAN. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| Add USB PCI-OHCI, USB keyboard and event poll support to the |
| MPC8641HPCN board config file. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 4dae14ce8fbdf380017dc54f172218e7d2acc889 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| USB PCI-OHCI, interrupt pipe and usb event poll support |
| |
| This patch added USB PCI-OHCI chips support, interrupt pipe support |
| and usb event poll support. For supporting the USB interrupt pipe, the |
| globe urb_priv is moved to purb in ed struct. Now, we can process |
| several urbs at one time. The interrupt pipe support codes are ported |
| from Linux kernel 2.4. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit fdcfaa1b02268b2899e374b35adf936c911a47eb |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:13 2007 +0200 |
| |
| USB event poll support |
| |
| This patch adds USB event poll support, which could be used in usbkbd |
| and other usb devices driver when the asynchronous interrupt |
| processing is supported. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com |
| |
| commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e |
| Author: Rodolfo Giometti <giometti@linux.it> |
| Date: Wed Jun 6 10:08:12 2007 +0200 |
| |
| ISP116x: delay for crappy USB keys |
| |
| Using some (very) slow USB keys cause the USB host controller buffers |
| are not ready to be read by the CPU so we need an extra delay before |
| reading the USB storage data. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit 09444143670c9c2243cb7aba9f70b3713d33bed1 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 10:08:12 2007 +0200 |
| |
| Change duplicate usb_cpu_init_fail to usb_board_init_fail |
| |
| Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing |
| this out. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Jun 5 12:30:52 2007 -0500 |
| |
| mpc8641 image size cleanup |
| |
| e600 does not have a bootpg restriction. |
| Move the version string to beginning of image at fff00000. |
| Resetvec.S is not needed. |
| Update flash copy instructions. |
| Add tftpflash env variable |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e3cbe1f93c5722f8ebbad468e30c069a2b511097 |
| Author: Benoît Monin <bmonin@adeneo.eu> |
| Date: Mon Jun 4 08:36:05 2007 +0200 |
| |
| [PATCH] Fix ppc4xx bootstrap letter displayed on startup |
| |
| The attached patch is mainly cosmetic, allowing u-boot to |
| display the correct bootstrap option letter according to the |
| datasheets. |
| |
| The original patch was extended with 405EZ support by Stefan |
| Roese. |
| |
| Signed-off-by: Benoit Monin <bmonin@adeneo.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5b1313fb2758ffce8b624457f777d8cc6709608d |
| Author: Nikita V. Youshchenko <yoush@debian.org> |
| Date: Wed May 23 12:45:19 2007 +0400 |
| |
| fix compilation problem for mpc8349itx CFG_RAMBOOT |
| |
| Current include/configs/MPC8349ITX.h does contain some support for building |
| image that will be started from memory (without putting in into flash). |
| It could be triggered by building with TEXT_BASE set to a low value. |
| |
| However, this support is incomplete: using of low TEXT_BASE causes |
| defining configuration macros in inconsistent way, which later leads |
| to compilation errors. In particular. flash support is being disabled, |
| but then flash structures get referenced. |
| |
| This patch fixes this, making it possible to build with low TEXT_BASE. |
| |
| Signed-Off-By: Nikita Youshchenko <yoush@debian.org> |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8a364f0970de49949d635e60accf463c6443ef8c |
| Author: Nikita V. Youshchenko <yoush@debian.org> |
| Date: Wed May 23 12:45:25 2007 +0400 |
| |
| add missing 'console' var to default mpc8349itx config |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 16:18:17 2007 +0200 |
| |
| ppc4xx: Add missing file for Bamboo NAND booting support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:58:19 2007 +0200 |
| |
| ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz |
| |
| This patch undoes the patch by Jeff Mann with commit-id ada4697d. As |
| suggested by AMCC it is not recommended to dynamically change the EBC |
| speed after bootup. So we undo this change to be on the safe side. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9d9096043e8f713d4bf1743d32e1459e6a11644b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:29:04 2007 +0200 |
| |
| ppc4xx: Update Sequoia NAND booting support with ECC |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cf959c7d6687567c308e366e9581e1a5aff5cc5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:27:11 2007 +0200 |
| |
| ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board |
| |
| This patch adds NAND booting support for the AMCC Bamboo eval board. |
| Since the NAND-SPL boot image is limited to 4kbytes, this version |
| only supports the onboard 64MBytes of DDR. The DIMM modules can't be |
| supported, since the setup code for I2C DIMM autodetection and |
| configuration is too big for this NAND bootloader. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42be56f53c8b107868e6125c8524ae84293e95a7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:23:04 2007 +0200 |
| |
| NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c |
| |
| The U-Boot NAND booting support is now extended to support ECC |
| upon loading of the NAND U-Boot image. |
| |
| Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a471db07fbb65a841ffc9f4f112562b945230f98 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:19:29 2007 +0200 |
| |
| ppc4xx: Prepare Bamboo port for NAND booting support |
| |
| This patch updates the "normal" Bamboo NOR booting port, so |
| that it is compatible with the coming soon NAND booting |
| Bamboo port. |
| |
| It also enables the 2nd NAND flash on the Bamboo. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:16:58 2007 +0200 |
| |
| ppc4xx: Update in_be32() functions and friends to latest Linux version |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:15:12 2007 +0200 |
| |
| NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c |
| |
| This patch adds hardware ECC support to the NDFC driver. It also |
| changes the register access from using the "simple" in32/out32 |
| functions to the in_be32/out_be32 functions, which make sure |
| that the access is correctly synced. This is the only recommended |
| access to SoC registers in the current Linux kernel. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 17b5e862287cca76f19dcf8b741e61a7d06617f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:12:15 2007 +0200 |
| |
| NAND: Update nand_ecc.c to latest Linux version |
| |
| This patch updates the nand_ecc code to the latest Linux version. |
| The main reason for this is the more compact code. This makes |
| it possible to include the ECC code into the NAND bootloader |
| image (NAND_SPL) for PPC4xx. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d2d432760d2199d0e8558fdd9d1789b8131abcf7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:09:50 2007 +0200 |
| |
| ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 13:45:24 2007 +0200 |
| |
| ppc4xx: Change Luan config file to support ECC |
| |
| With the updated 44x DDR2 driver the Luan board now supports |
| ECC generation and checking. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7187db73491c8de0fb56efb5e5134ba5ec443089 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 13:45:00 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Add config option for 180 degree advance clock control as needed |
| for the AMCC Luan eval board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ee1529838abbfaa35f14e3ffbeaaba693159475f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu May 31 17:20:09 2007 +0200 |
| |
| Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7049288fb1f16f1b317140226cdebd07bd416395 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:26:46 2007 +0200 |
| |
| Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 4520fd4d2c450da49637216aa0e53739b61c60ac |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:06:36 2007 +0200 |
| |
| Motion-PRO: Add support for redundant environment. |
| |
| Enable redundant environment, add a MTD partition for it; also add env. |
| variable command for passing MTD partitions to the kernel command line. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a26eabeec31746f06d309103690892805696e344 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:05:11 2007 +0200 |
| |
| Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. |
| |
| Allow passing longer command line to the kernel - useful especially |
| for passing MTD partition layout. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9160b96f71483a116de81c68985e8ee306d36764 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:04:18 2007 +0200 |
| |
| Fix: Add missing NULL termination in strings expanded by macros parser. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 630ec84aef7228fc1dbfb38dec78541403a786cd |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:03:37 2007 +0200 |
| |
| Motion-PRO: Update EEPROM's page write bits and write delay. |
| |
| Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A |
| have a page write capability of two bytes", and "This device offers fast (1ms) |
| byte write". Add 3ms of extra delay. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c00125e07c1ebc125bab40e1e18bceed8be0c162 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:58:45 2007 +0200 |
| |
| MPC5XXX, Motion-PRO: Fix PHY initialization problem. |
| |
| After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which |
| networking does not function. This commit switches PHY to TX mode by clearing |
| the FX_SEL bit of Mode Control Register. It also reverses commit |
| 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:57:15 2007 +0200 |
| |
| Motion-PRO: Add support for the temperature sensor. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c75e639630cc132dc19cd1ecda5922c0db0bfbba |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:55:23 2007 +0200 |
| |
| Motion-PRO: Add displaying of CPLD revision information during boot. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c99512d6bd3973f01ca2fc4896d829b46e68f150 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:53:43 2007 +0200 |
| |
| MPC5xxx: Change names of defines related to IPB and PCI clocks. |
| |
| Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining |
| them does not cause PCI or IPB clocks to run at the specified speed. |
| Instead, they configure divisors used to calculate said clocks. This |
| patch renames the defines according to their real function. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a11c0b85dc3664bb3c1e781137118730c8f619ab |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:51:48 2007 +0200 |
| |
| Motion-PRO: Add LED support. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b |
| Author: Ulf Samuelsson <ulf@atmel.com> |
| Date: Thu May 24 12:12:47 2007 +0200 |
| |
| [PATCH][NAND] Define the Vendor Id for Micron NAND Flash |
| |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d756894722c888d09a9fa1df8323753772d3dcce |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 24 09:49:00 2007 +0200 |
| |
| ppc4xx: Fix small 405EZ OCM initilization bug in start.S |
| |
| As pointed out by Bruce Adler <bruce.adler@acm.org> this patch |
| fixes a small bug in the 405EZ OCM initialization. Thanks for |
| spotting. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5d4a179013d59a76446462e1eb0a969fba63eb81 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 24 08:22:09 2007 +0200 |
| |
| ppc4xx: Update AMCC Acadia support for board revision 1.1 |
| |
| This patch updates the Acadia (405EZ) support for the new 1.1 board |
| revision. It also adds support for NAND FLASH via the 4xx NDFC. |
| |
| Please note that the jumper J7 must be in position 2-3 for this |
| NAND support. Position 1-2 is for NAND booting only. NAND booting |
| support will follow later. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 822d55365bb557e084d0e33625a6dedcc866110b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed May 23 14:09:46 2007 -0500 |
| |
| Add LIST_86xx MAKEALL target for PowerPC builds. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9f0077abd69f7a7c756a915b961037302be3e6f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue May 22 12:48:09 2007 +0200 |
| |
| ppc4xx: Use do { ... } while (0) for CPR & SDR access macros |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6f3dfc139a838b0841c151efe00ad47db2366e79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue May 22 12:46:10 2007 +0200 |
| |
| ppc4xx: Add 405 support to 4xx NAND driver ndfc.c |
| |
| This patch adds support for 405 PPC's to the 4xx NAND driver |
| ndfc.c. This is in preparation for the new AMCC 405EZ. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 10603d76767426be803dadd4fb688b97eb69481c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon May 21 07:41:22 2007 +0200 |
| |
| ppc4xx: Fix problem in 405EZ OCM initialization |
| |
| As spotted by Bruce Adler this patch fixes an initialization problem |
| for the 405EZ OCM. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3e3b956906eba9e4ad7931581ecedaad10eccce8 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 16:47:03 2007 +0100 |
| |
| Reduce line lengths to 80 characters max. |
| |
| commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 14:34:07 2007 +0100 |
| |
| Makefile permissions |
| |
| commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 14:33:11 2007 +0100 |
| |
| Makefile permissions |
| |
| commit 255a3577c848706441daee0174543efe205a77f8 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed May 16 16:52:19 2007 -0500 |
| |
| Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx |
| |
| For all practical u-boot purposes, TSECs don't differ throughout the |
| mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 70124c2602ae2d4c5d3dba05b482d91548242de8 |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Wed May 16 14:49:12 2007 +0200 |
| |
| Fix compile problem cause my Microblaze merge |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit ada4697d0230d6da552867777f98a67ec3ba2579 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Wed May 16 13:23:10 2007 +0200 |
| |
| [PATCH] Run new sequoia boards with an EBC speed of 83MHz |
| |
| Because the Sequoia board does not boot with an EBC faster than 66MHz, |
| the clock divider are changed after the initial boot process. |
| |
| This allows for maximum clocking speeds to be achieved on newer boards. |
| Sequoia boards with 666.66 MHz processors require that the EBC divider |
| be set to 3 in order to start the initial boot process at a slower EBC |
| speed. After the initial boot process, the divider can be set back to 2, |
| which will cause the boards to run at 83.333MHz. This is backward |
| compatible with boards with 533.33 MHz processors, as these boards will |
| already be set with an EBC divider of 2. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| |
| commit a7676ea7732f3c596805079fed7e5c9fac652cfc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 16 01:16:53 2007 +0200 |
| |
| Minor Coding Style cleanup, update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d62f64cc23a940eafe712c776b3249e4160753d1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 16 00:13:33 2007 +0200 |
| |
| Coding Style Cleanup, new CHANGELOG |
| |
| commit 3162eb836903c8b247fdc7470dd39bfa6996f495 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue May 15 23:38:05 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e |
| Author: mushtaq khan <mushtaq_k@procsys.com> |
| Date: Fri Apr 20 14:23:02 2007 +0530 |
| |
| Add driver for S-ATA-controller on Intel processors with South |
| Bridge, ICH-5, ICH-6 and ICH-7. |
| |
| Implementation: |
| |
| 1. Code is divided in to two files. All functions, which are |
| controller specific are kept in "drivers/ata_piix.c" file and |
| functions, which are not controller specific, are kept in |
| "common/cmd_sata.c" file. |
| |
| 2. Reading and Writing from the S-ATA drive is done using PIO method. |
| |
| 3. Driver can be configured for 48-bit addressing by defining macro |
| CONFIG_LBA48, if this macro is not defined driver uses the 28-bit |
| addressing. |
| |
| 4. S-ATA read function is hooked to the File system, commands like |
| ext2ls and ext2load file can be used. This has been tested. |
| |
| 5. U-Boot command "SATA_init" is added, which initializes the S-ATA |
| controller and identifies the S-ATA drives connected to it. |
| |
| 6. U-Boot command "sata" is added, which is used to read/write, print |
| partition table and get info about the drives present. This I have |
| implemented in same way as "ide" command is implemented in U-Boot. |
| |
| 7. This driver is for S-ATA in native mode. |
| |
| 8. This driver does not support the Native command queuing and |
| Hot-plugging. |
| |
| Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> |
| |
| commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 |
| Author: mushtaq khan <mushtaq_k@procsys.com> |
| Date: Mon Apr 30 15:57:22 2007 +0530 |
| |
| Fixes bug clearing the bss section for i386 |
| |
| Hi, |
| There is a bug in the code of clearing the bss section for processor |
| i386.(File: cpu/i386/start.S) |
| In the code, bss_start addr (starting addr of bss section) is put into |
| the register %eax, but the code which clears the bss section refers to |
| the addr pointed by %edi. |
| |
| This patch fixes this bug by putting bss_start into %edi register. |
| |
| Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> |
| |
| commit c3243cf7b490057277d61acffe4ad0946f9eb4a4 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Mon Apr 30 16:47:28 2007 -0500 |
| |
| Add support for BCM5464 Quad Phy |
| |
| Added support for Broadcom's BCM5464 Quad Phy |
| |
| Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Wed May 9 08:10:57 2007 +0800 |
| |
| Search the exception table with linear algorithm |
| |
| Search the exception table with linear algorithm instead of |
| bisecting algorithm. |
| Because the exception table might be unsorted. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3 |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Mon May 14 11:47:35 2007 +0800 |
| |
| Fix compilation issues on MACOSX |
| |
| Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com> |
| Signed-off-by: Aubrey Li <aubrey.adi@gmail.com> |
| |
| commit 56fd7162985c412317bbf763a225fba23c64fd31 |
| Author: Stephen Williams <steve@icarus.com> |
| Date: Tue May 15 07:55:42 2007 -0700 |
| |
| Fix for compile of JSE target |
| |
| The attached patch fixes the compile of the JSE board in the |
| denx git as of 14 may 2007. It is an extremely simple patch, |
| it just adds the missing define of CFG_SYSTEMACE_WIDTH. |
| |
| Fix to compile JSE against 20070514 git of u-boot |
| |
| commit 69df3c4da0c93017cceb25a366e794570bd0ed98 |
| Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)> |
| Date: Sun May 13 21:01:03 2007 +0900 |
| |
| sh: MS7750SE support. |
| |
| This adds support for the Hitachi MS7750SE. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 0b135cfc2e524dc249b75057b55dd4cc09842e27 |
| Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)> |
| Date: Sun May 13 20:58:00 2007 +0900 |
| |
| sh: First support code of SuperH. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 61936667e86a250ae12fd2dc189d3588f0a59e0b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri May 11 12:01:49 2007 +0200 |
| |
| ppc4xx: Add mtcpr/mfcpr access macros |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 343c48bd84606c4025c8a7c7263fda465d6e284c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri May 11 12:01:06 2007 +0200 |
| |
| ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 |
| Author: Piotr Kruszynski <ppk@semihalf.com> |
| Date: Thu May 10 16:55:52 2007 +0200 |
| |
| [Motion-PRO] Add MTD and JFFS2 support, also add default partition |
| definition. |
| |
| commit 65fb6a676e821f9570a2a376dc204bf611ce5f81 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:42:44 2007 +0100 |
| |
| Add the board directory for SMN42 |
| |
| commit 160131bf965785419626df6c388729fe0b597992 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:41:58 2007 +0100 |
| |
| Add the files for the SMN42 board |
| |
| commit 5c6d2b5a500f8c49670de8910150b78a41f781fc |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:40:34 2007 +0100 |
| |
| Remove the deleted files for the SMN42 patch |
| |
| commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:37:56 2007 +0100 |
| |
| New board SMN42 branch |
| |
| commit 29f3be0caf0799ca6b89dfd9824c15619a50000f |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 10:24:38 2007 +0100 |
| |
| Makefile permissions |
| |
| commit b84289b595731e8851df46e893845cc1322c9b9b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue May 8 14:17:07 2007 -0500 |
| |
| 8641hpcn: Fix Makefile after moving pixis to board/freescale. |
| |
| The OBJTREE != SRCTREE build scenario was broken. |
| This fixes it. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 15:57:43 2007 +0200 |
| |
| add: reading special purpose registers |
| |
| commit 1a50f164beb065f360fbddb76029607d6b099698 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 14:52:52 2007 +0200 |
| |
| add: Microblaze V5 exception handling |
| |
| commit ab874d5047e5d30dbc1e517ff26083efffa98ecb |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 14:39:11 2007 +0200 |
| |
| add: FSL control read and write |
| |
| commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3 |
| Author: Piotr Kruszynski <ppk@semihalf.com> |
| Date: Tue May 8 13:05:44 2007 +0200 |
| |
| [Motion-PRO] Add support for I2C, EEPROM and RTC. |
| |
| commit fa5c2ba123b1bf88455bfc21db5e786ca045029d |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 10:23:56 2007 +0200 |
| |
| [Motion-PRO] Add ATA support. Add CF-booting commands to the default |
| environment. |
| |
| commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 09:39:12 2007 +0200 |
| |
| [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This |
| eliminates networking problems in Linux (timeouts). |
| |
| commit 1f1369c34b629be94702684d41d3fddf0f6193e7 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 09:21:57 2007 +0200 |
| |
| [Motion-PRO] Enable Flat Device Tree support and modify default environment |
| to allow booting of FDT-expecting kernels. |
| |
| commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 23:58:31 2007 +0200 |
| |
| new: USE_MSR_INTR support |
| |
| commit 008861a2f3ef2c062744d733787c7e530a1b8761 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Mon May 7 22:36:15 2007 +0200 |
| |
| [MPC5xxx] There are networking problems on the Motion-PRO board with |
| current PHY initalization code (tftp timeouts all the time). This commit |
| temporarily disables PHY initalization sequence to make the networking |
| operational, until a fix is found. |
| |
| commit abca901869c3760b6c5fecb825db6c1d91a78a93 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 7 22:10:36 2007 +0200 |
| |
| Get rid of duplicated file (see include/configs/sbc8560.h instead) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 7 22:07:08 2007 +0200 |
| |
| Get rid of duplicated file (see doc/README.SBC8560 instead) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a7bac7e9b57ba948051beb19ec5be3a75ce75383 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:43:10 2007 +0200 |
| |
| fix: read and write MSR - repair number of parameters |
| |
| commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon May 7 19:42:49 2007 +0200 |
| |
| [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file |
| |
| A '3' got cut off in the formatting of the last patch to automatically |
| change the clock speed of the system clock on sequoia board. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:33:51 2007 +0200 |
| |
| new: fsl interrupt support |
| FSL_Has_data is connected to INTC. |
| |
| commit 792032baa7d625e34c981ab6df521911bd8dc861 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:30:12 2007 +0200 |
| |
| fix: interrupt handler |
| remove asm code |
| |
| commit f3f001a341ef185d0f13841be5b5dc3395aacc31 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:25:08 2007 +0200 |
| |
| fix: remove asm code |
| |
| commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:12:43 2007 +0200 |
| |
| fix: clean interrupt |
| |
| commit 42efed6130c8fcf7da881385b5427065d2801757 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 17:22:25 2007 +0200 |
| |
| fix: interrupt handler for multiple sources |
| |
| commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 17:11:09 2007 +0200 |
| |
| new: add writing to msr register |
| |
| commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon May 7 16:43:56 2007 +0200 |
| |
| Fix an ancient CHANGELOG conflict |
| |
| commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Sat May 5 08:12:30 2007 +0200 |
| |
| 5xxx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2 |
| Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Date: Sun Apr 29 14:01:54 2007 +0200 |
| |
| [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message |
| |
| MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up |
| message. Use PVR to distinguish between the two variants, and print proper CPU |
| information. |
| |
| Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Wed Apr 25 16:01:26 2007 +0200 |
| |
| [PATCH] simplify silent console |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit b7598a43f2b421a713d8135e98a42c37d9eb9df0 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Mon Apr 23 15:30:39 2007 +0200 |
| |
| [PATCH] Avoid assigning PCI resources from zero address |
| |
| If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE |
| core complains and IDE drivers fails to work. Also, assigning zero to a BAR |
| was illegal according to PCI 2.1 (the later revisions seem to have excluded the |
| sentence about "0" being considered an invalid address) -- so, use a reasonable |
| starting value of 0x1000 (that's what the most Linux archs are using). |
| |
| Alternatively, one might have fixed the calls to pci_set_region() individually |
| (some code even seems to have taken care of this issue) but that would have |
| been a lot more work. :-) |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ffd451afeb08e5be7ddae680487ec962b2bca25 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon Apr 23 14:00:11 2007 +0200 |
| |
| [patch] setenv(...) can delete environmentalvariables |
| |
| update setenv() function so that entering a NULL value for the |
| variable's value will delete the environmental variable |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit ebd0a0ae05a44769c4e27458ad4e9f3438250443 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Apr 23 13:54:24 2007 +0200 |
| |
| [patch] use unsigned char in smc91111 driver for mac |
| |
| the v_mac variable in the smc91111 driver is declared as a signed char ... |
| this causes problems when one of the bytes in the MAC is "signed" like 0xE0 |
| because when it gets printed out, you get a display like: |
| 0xFFFFFFE0 and that's no good |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit ffc50f9bb194343c6303517a517708457a5eb6b8 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat May 5 18:54:42 2007 +0200 |
| |
| new: FSL and MSR support #2 |
| |
| commit f7e2e0eb0668136305f78bb9c21be79b48a34247 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat May 5 18:27:16 2007 +0200 |
| |
| new: FSL and MSR support |
| |
| commit 2f15278c2eb911c668b4fe562130b78cf554d139 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 18:23:11 2007 +0200 |
| |
| Coding stylke cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 885ec89b648a899a2f32393fd3ffd9f7234c4402 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 18:05:02 2007 +0200 |
| |
| Add STX GP3 SSA board to MAKEALL script; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5499645b3fe17a548af9dfc479ca6e2455f179a2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 17:15:50 2007 +0200 |
| |
| Make "file" command happy with some config.mk files; update CHANGELOG |
| |
| commit e3b8c78bc2489c27ae020986ef0eaca684866cef |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Sat May 5 08:32:14 2007 +0200 |
| |
| ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz |
| |
| The AMCC Secquoia board has been changed in a new revision from using a |
| 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD |
| indicates the difference. This patch reads that bit and uses the correct |
| clock speed for the board. This code is backward compatable will all |
| prior boards. All prior boards will be read as 33.000. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f544ff6656fca263ed1ebe39899b6d95da67c8b8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat May 5 08:29:01 2007 +0200 |
| |
| ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting |
| |
| Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big |
| for the 4k NAND boot image so define bus_frequency to 133MHz here |
| which is save for the refresh counter setup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2f550ab976405300f5b07bf2890800840d0aa05f |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Sat May 5 08:12:30 2007 +0200 |
| |
| 5xxx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a79886590593ba1d667c840caa4940c61639f18f |
| Author: Thomas Knobloch <knobloch@siemens.com> |
| Date: Sat May 5 07:04:42 2007 +0200 |
| |
| NAND: Wrong calculation of page number in nand_block_bad() |
| |
| In case that there is no memory based bad block table available the |
| function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call |
| nand_block_bad() directly. When parameter 'getchip' is set to zero, |
| nand_block_bad() will not right shift the offset to calculate the |
| correct page number. |
| |
| Signed-off-by: Thomas Knobloch <knobloch@siemens.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri May 4 10:02:33 2007 +0200 |
| |
| Fix initrd length corruption in bootm command. |
| |
| When using FDT Images, the length of an inital ramdisk was |
| overwritten (bug introduced by commit 87a449c8, 22 Aug 2006). |
| |
| Patches by Timur Tabi & Johns Daniel. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu May 3 19:43:52 2007 -0500 |
| |
| mpc83xx: fix trivial error in MAKEALL |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu May 3 16:34:41 2007 +0200 |
| |
| Update board configuration for STX GP3SSA board: |
| |
| Enable hush shell, environment in flash rather in EEPROM, |
| more user-friendly default environment, etc. |
| The simple EEPROM environment can be selected easily in the board |
| config file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2c6fb199dc5756fc72f49d1f4de105e089049d65 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Apr 24 14:37:49 2007 +0200 |
| |
| Cleanup STX GP3SSA code; fix build and compile problems. |
| |
| commit 35171dc04e028ecacc23ad916a66295472555dbf |
| Author: Dan Malek <dan@embeddedalley.com> |
| Date: Fri Jan 5 09:15:34 2007 +0100 |
| |
| Add support for STX GP3SSA (stxssa) Board |
| |
| Signed-off-by Dan Malek, <dan@embeddedalley.com> |
| |
| commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed May 2 13:31:53 2007 +0200 |
| |
| macb: Don't restart autonegotiation if we already have link |
| |
| Rework macb_phy_init so that it doesn't attempt to re-negotiate if the |
| link is already up. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 04fcb5d38bc90779cd9a710d60702075986f0e29 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed May 2 13:22:38 2007 +0200 |
| |
| macb: Introduce a few barriers when dealing with DMA descriptors |
| |
| There were a few theoretical possibilities that the compiler might |
| optimize away DMA descriptor reads and/or writes and thus cause |
| synchronization problems with the hardware. Insert barriers where |
| we depend on reads/writes actually hitting memory. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ffa621a0d12a1ccd81c936c567f8917a213787a8 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sat Feb 24 01:08:13 2007 -0600 |
| |
| Cleaned up some 85xx PCI bugs |
| |
| * Cleaned up the CDS PCI Config Tables and added NULL entries to |
| the end |
| * Fixed PCIe LAWBAR assignemt to use the cpu-relative address |
| * Fixed 85xx PCI code to assign powar region sizes based on the |
| config values (rather than hard-coding them) |
| * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 6743105988fc44d5b0d30388c790607835aae7a6 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:54:25 2007 -0500 |
| |
| Add support for the 8568 MDS board |
| |
| This included some changes to common files: |
| * Add 8568 processor SVR to various places |
| * Add support for setting the qe bus-frequency value in the dts |
| * Add the 8568MDS target to the Makefile |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit af1c2b84bf27c8565baddc82d1abb93700d10e2e |
| Author: David Updegraff <dave@cray.com> |
| Date: Fri Apr 20 14:34:48 2007 -0500 |
| |
| Add support for treating unknown PHYs as generic PHYs. |
| |
| When bringing up u-boot on new boards, PHY support sometimes gets |
| neglected. Most PHYs don't really need any special support, |
| though. By adding a generic entry that always matches if nothing |
| else does, we can provide support for "unsupported" PHYs for the |
| tsec. |
| |
| The generic PHY driver supports most PHYs, including gigabit. |
| |
| Signed-off-by: David Updegraff <dave@cray.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a75af9bfd8fff0499efdbb90601cec5a2afef117 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Wed Feb 7 15:28:04 2007 -0600 |
| |
| Conditionalize 8641 Rev1.0 MCM workarounds |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f64702b7fc8f8df39d31add770df6e372f9e9ce3 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Apr 30 13:59:50 2007 -0500 |
| |
| Fix memory initialization on MPC8349E-mITX |
| |
| Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. |
| This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary |
| on some ITX boards, notably those with a revision 3.1 CPU. |
| |
| Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into |
| ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Michael Benedict <MBenedict@twacs.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Apr 30 15:26:21 2007 -0500 |
| |
| mpc83xx: replace elaborate boottime verbosity with 'clocks' command |
| |
| and fix CPU: to align with Board: display text. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c1ab82669d9525998c34e802a12cad662723f22a |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Mar 16 13:02:53 2007 -0500 |
| |
| Rewrote picos_to_clk() to avoid rounding errors. |
| Clarified that conversion is to DRAM clocks rather than platform clocks. |
| Made function static to spd_sdram.c. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8b39501d28754e72726ce7fb02310e56dbdf116a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Apr 29 14:13:01 2007 +0200 |
| |
| ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 |
| Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Date: Sun Apr 29 14:01:54 2007 +0200 |
| |
| [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message |
| |
| MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up |
| message. Use PVR to distinguish between the two variants, and print proper CPU |
| information. |
| |
| Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5c5d3242935cf3543af01142627494434834cf98 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Apr 25 12:34:38 2007 -0500 |
| |
| mpc83xx: minor fixups for 8313rdb introduction |
| |
| commit ada4d40091f6ed4a4f0040e08d20db21967e4a67 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Wed Apr 25 16:01:26 2007 +0200 |
| |
| [PATCH] simplify silent console |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 144876a380f5756f57412caf74c1d6dc201dd796 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Apr 24 23:01:02 2007 +0200 |
| |
| [PATCH] MTD partition support, JFFS2 support |
| |
| commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Apr 24 14:03:45 2007 +0200 |
| |
| ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:37:47 2007 -0500 |
| |
| Reworked 85xx speed detection code |
| |
| Changed the code to read the registers and calculate the clock |
| rates, rather than using a "switch" statement. |
| |
| Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 81f481ca708ed6a56bf9c410e3191dbad581c565 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:24:28 2007 -0500 |
| |
| Enable 8544 support |
| |
| * Add support to the Makefile |
| * Add 8544 configuration support to the tsec driver |
| * Add 8544 SVR numbers to processor.h |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 17:12:25 2007 -0600 |
| |
| Support 1G size on 8548 |
| |
| e500v2 and newer cores support 1G page sizes. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 17:11:16 2007 -0600 |
| |
| Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG |
| |
| The other pagesz constants use one letter to specify order of |
| magnitude. Also change the one reference to it in mpc8548cds/init.S |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 1f9a318cea14272edd10d63739e2d326c90f430e |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 16:28:46 2007 -0600 |
| |
| Only set ddrioovcr for 8548 rev1. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sat Feb 24 01:16:45 2007 -0600 |
| |
| Tweak DDR ECC error counter |
| |
| Enable single-bit error counter when memory was cleared by ddr controller. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Feb 12 13:34:55 2007 -0600 |
| |
| 85xx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 01:44:44 2007 -0500 |
| |
| Some 85xx cpu cleanups |
| |
| * Cleaned up the TSR[WIS] clearing |
| * Cleaned up DMA initialization |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 01:32:22 2007 -0500 |
| |
| Add cpu support for the 8544 |
| |
| Recognize new SVR values, and add a few register definitions |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 11 16:51:02 2007 -0500 |
| |
| Add MPC8544DS basic port board files. |
| |
| Add board port under new board/freescale directory |
| structure and reuse existing PIXIS FPGA support there. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 11 16:50:57 2007 -0500 |
| |
| Add MPC8544DS main configuration file. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Wed Dec 27 22:07:15 2006 +0300 |
| |
| Fix PCI I/O space mapping on Freescale MPC85x0ADS |
| |
| The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit |
| 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's |
| describing the local address window used for the PCI I/O space accesses -- fix |
| this and carry over the necessary changes into the MPC8560ADS code since the |
| PCI I/O space mapping was also broken for this board (by the earlier commit |
| 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how |
| the PCI I/O space must be mapped to all the MPC85xx board config. headers. |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| |
| board/mpc8540ads/init.S | 4 ++-- |
| board/mpc8560ads/init.S | 4 ++-- |
| include/configs/MPC8540ADS.h | 5 ++--- |
| include/configs/MPC8541CDS.h | 2 +- |
| include/configs/MPC8548CDS.h | 2 +- |
| include/configs/MPC8560ADS.h | 8 ++++---- |
| 6 files changed, 12 insertions(+), 13 deletions(-) |
| |
| commit 96629cbabdb727d4a5e62542deefc01d498db6dc |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Tue Dec 5 16:42:30 2006 +0800 |
| |
| u-boot: Fix e500 v2 core reset bug |
| |
| The following patch fixes the e500 v2 core reset bug. |
| For e500 v2 core, a new reset control register is added to reset the |
| processor. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 63247a5acd58032e6cf33f525bc3923b467bac88 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Wed Dec 20 11:01:00 2006 +0800 |
| |
| u-boot: v2: Remove the fixed TLB and LAW entrynubmer |
| |
| Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW |
| entry number to control the loop. This can reduce the potential risk |
| for the 85xx processor increasing its TLB adn LAW entry number. |
| |
| Signed-off-by: Swarthout Edward <swarthout@freescale.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Mon Dec 18 17:01:04 2006 +0800 |
| |
| u-boot: Fix the 85xxcds tsec bug |
| |
| Fix the 85xxcds tsec bug. |
| When enable PCI, tsec.o should be added to u-boot.lds to make tsec work. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 7337b237ffc4aaf1b9467024fe472a880d852598 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Fri Dec 15 14:43:31 2006 +0800 |
| |
| u-boot: Fix CPU2 errata on MPC8548CDS board |
| |
| This patch apply workaround of CPU2 errata on MPC8548CDS board. |
| |
| Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09 |
| Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com> |
| Date: Mon Dec 18 16:25:15 2006 +0800 |
| |
| u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default |
| |
| This patch disables MPC8548CDS 2T_TIMING for DDR by default. |
| |
| Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Thu Dec 14 14:14:55 2006 +0800 |
| |
| u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board |
| |
| Enable PCI function and add PEX & rapidio memory map on MPC8548CDS |
| board. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 96b8a05432f346f36493535c85320b70ec9c7c1b |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:54:15 2007 -0500 |
| |
| mpc83xx: Add MPC8313ERDB support. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 49ea3b6eafe606285ae4d5c378026153dde53200 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:21 2007 -0500 |
| |
| mpc83xx: Add generic PCI setup code. |
| |
| Board code can now request the generic setup code rather than having to |
| copy-and-paste it for themselves. Boards should be converted to use this |
| once they're tested with it. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:19 2007 -0500 |
| |
| mpc83xx: Add 831x support to speed.c. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:18 2007 -0500 |
| |
| mpc83xx: Add 831x support to global_data.h |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 95e7ef897e54591e615fc1b458b74c286fe1fb06 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:16 2007 -0500 |
| |
| mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu(). |
| |
| Rather than misleadingly define PVR_83xx as the specific type of 83xx |
| being built for, the PVR of each core revision is defined. checkcpu() now |
| prints the core that it detects, rather than aborting if it doesn't find |
| what it thinks it wants. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit a35b0c4950d84cf9e3a9e32b916135956d1ac636 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:15 2007 -0500 |
| |
| mpc83xx: Recognize SPR values for MPC8311 and MPC8313. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit d87c57b201b4572d16f1b642998faa00c9912b16 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:31:55 2007 -0500 |
| |
| mpc83xx: Add register definitions for MPC831x. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 7fc4c71a143be8666d70803fb25ae60379c95622 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 23 15:39:59 2007 +0200 |
| |
| Fix file mode |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 38257988abfe74d459ca2ad748b109ca04e4efe1 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Mon Apr 23 15:30:39 2007 +0200 |
| |
| [PATCH] Avoid assigning PCI resources from zero address |
| |
| If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE |
| core complains and IDE drivers fails to work. Also, assigning zero to a BAR |
| was illegal according to PCI 2.1 (the later revisions seem to have excluded the |
| sentence about "0" being considered an invalid address) -- so, use a reasonable |
| starting value of 0x1000 (that's what the most Linux archs are using). |
| |
| Alternatively, one might have fixed the calls to pci_set_region() individually |
| (some code even seems to have taken care of this issue) but that would have |
| been a lot more work. :-) |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit afb903a2eb9436baa9270ccc0c27082d86497d89 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon Apr 23 14:00:11 2007 +0200 |
| |
| [patch] setenv(...) can delete environmentalvariables |
| |
| update setenv() function so that entering a NULL value for the |
| variable's value will delete the environmental variable |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 36f104e5caa747d568eff26b369565af57c2ffa6 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Apr 23 13:54:24 2007 +0200 |
| |
| [patch] use unsigned char in smc91111 driver for mac |
| |
| the v_mac variable in the smc91111 driver is declared as a signed char ... |
| this causes problems when one of the bytes in the MAC is "signed" like 0xE0 |
| because when it gets printed out, you get a display like: |
| 0xFFFFFFE0 and that's no good |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Apr 23 13:10:52 2007 +0200 |
| |
| USB: (Another) delay for crappy USB keys. |
| |
| Some USB keys are slow in giving back an answer when the Root HUB |
| enables power lines. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 23 12:00:22 2007 +0200 |
| |
| Remove BOARDLIBS usage completely |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 32556443840f127170e4baa8bdd5b567039f6c36 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 21:07:22 2007 +0200 |
| |
| [PATCH] SystemACE support for Microblaze |
| |
| commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 21:02:40 2007 +0200 |
| |
| 16bit read/write little endian |
| |
| commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 20:53:31 2007 +0200 |
| |
| Change ML401 parameters - Xilinx BSP |
| |
| commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Feb 28 05:37:29 2007 -0600 |
| |
| mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 79cb47391eebef85acadb3f6961ef6c55cace6ac |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Fri Jan 19 10:42:37 2007 +0800 |
| |
| Enable LAWs for MPC8641 PCI-Ex2. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit bd7851ce1e1f140665b520026abf1042968b1102 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Apr 20 14:12:26 2007 -0500 |
| |
| mpc86xx; Write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7dbdf28b8bd855a8530dc3292e4982575a197060 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Apr 20 14:11:38 2007 -0500 |
| |
| mpc86xx: protect memcpy to bad address if a mac-address is missing from dt |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 14da5f7675bbb427c469e3f45006e027b6e21db9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 20 17:43:28 2007 +0200 |
| |
| Cleanup compiler warnings, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6923565db12af34fd5e02d354ee65a8c78ac460f |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Apr 20 12:01:47 2007 +0200 |
| |
| Fix breakage of NC650 board with respect to nand support. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 39f23cd90947639ac278a18ff277ec786b5ac167 |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Fri Apr 20 11:13:16 2007 +0200 |
| |
| [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation |
| |
| G2 core reference manual says decrementer and time base |
| are decreasing/increasing once every 4 bus clock cycles. |
| Lets fix it, so time in Linux won't run twice as fast |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu Apr 19 23:14:39 2007 -0400 |
| |
| Fix serious pointer bug with bootm and reserve map. |
| |
| What was suppose to be a stack variable was declared as a pointer, |
| overwriting random memory. |
| Also moved the libfdt.a requirement into the main Makefile. That is |
| The U-Boot Way. |
| |
| commit d21686263574e95cb3e9e9b0496f968b1b897fdb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Apr 19 09:53:52 2007 +0200 |
| |
| ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai |
| |
| Previous versions used full wait states for the chip select #1 which |
| is connected to the Xilinix SystemACE controller on the AMCC Katmai |
| evaluation board. This leads to really slow access and therefore low |
| performance. This patch now sets up the chip select a lot faster |
| resulting in much better read/write performance of the Linux driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 37837828d89084879bee2f2b8c7c68d4695940df |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:49:29 2007 +0200 |
| |
| Clenaup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:20:58 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:07:26 2007 +0200 |
| |
| Cleanup, update CHANGELOG |
| |
| Sigend-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5f6c732affea9647762d27a4617a2ae64c52dceb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 16:17:46 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit ad4eb555671d97f96dc56eab55103b1f86874b01 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 14:30:39 2007 +0200 |
| |
| MCC200 board: remove warning which is obsolete after PSoC firmware changes |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3747a3f010b2b1442dec3e871c69788b6017aaae |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Wed Apr 18 12:11:05 2007 +0200 |
| |
| [PATCH] icecube/lite5200b: document wakeup from low-power support |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| |
| commit e673226ff9d6aa91b47ceac74b8c13770b06bb37 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 18 12:07:47 2007 +0200 |
| |
| ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 18 12:05:59 2007 +0200 |
| |
| ppc4xx: Add output for bootrom location to 405EZ ports |
| |
| Now 405EZ ports also show upon bootup from which boot device |
| they are configured to boot: |
| |
| U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) |
| |
| CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) |
| Bootstrap Option E - Boot ROM Location EBC (32 bits) |
| 16 kB I-Cache 16 kB D-Cache |
| Board: Acadia - AMCC PPC405EZ Evaluation Board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Apr 17 13:30:33 2007 +0100 |
| |
| Move ppearse to ARM board list |
| Add Konstantin Kletschke for scb9328. |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| |
| commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3 |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Mon Apr 16 14:00:13 2007 +0200 |
| |
| [PATCH] icecube/lite5200b: wakeup from low-power support |
| |
| U-Boot part of Lite5200b low power mode support. |
| Puts SDRAM out of self-refresh and transfers control to |
| address saved at physical 0x0. |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sun Apr 15 13:54:26 2007 -0400 |
| |
| Fix the ft_cpu_setup() property settings. |
| |
| Use "setter" functions instead of flags, cleaner and more flexible. |
| It also fixes the problem noted by Timur Tabi that the ethernet MAC |
| addresses were all being set incorrectly to the same MAC address. |
| |
| commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Apr 14 22:51:24 2007 -0400 |
| |
| Improve the bootm command for CONFIG_OF_LIBFDT |
| |
| In bootm, create the "/chosen" node only if it doesn't already exist |
| (better matches the previous behavior). |
| Update for proper reserved memory map handling for initrd. |
| |
| commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Apr 14 22:46:41 2007 -0400 |
| |
| Add some utilities to manipulate the reserved memory map. |
| |
| commit 8048cdd56f04a756eeea4951f402bf5cc33785db |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Apr 14 21:16:54 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit 8e6875183cdca91c134408d119d4abcd48ef6856 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:56:46 2006 +0100 |
| |
| AVR32: Enable MMC support |
| |
| Set up the portmux for the MMC interface and enable the MMC driver |
| along with support for DOS partitions, ext2 and FAT filesystems. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit fc26c97bb6df41b4a95662c34054fe912387bf38 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jan 20 10:03:53 2006 +0100 |
| |
| Atmel MCI driver |
| |
| Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs. |
| |
| The AT91 ARM-based CPUs use basically the same hardware, so it should |
| be possible to share this driver, but no effort has been made so far. |
| |
| Hardware documentation can be found in the AT32AP7000 data sheet, |
| which can be downloaded from |
| |
| http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:55:37 2006 +0100 |
| |
| AVR32: Add clk and gpio infrastructure for mmci |
| |
| Implement functions for configuring the mmci pins, as well as |
| functions for getting the clock rate of the mmci controller. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7fac3f69e9f05c5e5326681976c35d129324c4de |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:53:56 2006 +0100 |
| |
| Enable partition support with MMC |
| |
| Include implementations of init_part() and get_partition_info() when |
| CONFIG_MMC is set. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 17:14:30 2006 +0100 |
| |
| AVR32: Enable networking |
| |
| Implement MACB initialization for AVR32 and ATSTK1000, and turn |
| everything on, including the MACB driver. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jan 20 10:03:34 2006 +0100 |
| |
| Atmel MACB ethernet driver |
| |
| Driver for the Atmel MACB on-chip ethernet controller. |
| |
| This driver has been tested on the ATSTK1000 board with a AT32AP7000 |
| CPU. It should probably work on AT91SAM926x as well with some minor |
| modifications. |
| |
| Hardware documentation can be found in the AT32AP7000 data sheet, |
| which can be downloaded from |
| |
| http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 16:56:14 2006 +0100 |
| |
| AVR32: Add clk and gpio infrastructure for macb0 and macb1 |
| |
| Implement functions for configuring the macb0 and macb1 pins, as |
| well as functions for getting the clock rate of the various |
| busses the macb ethernet controllers are connected to. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit d5acb95b16a0a74c643524342c3437e765426d05 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 15:39:15 2006 +0100 |
| |
| AVR32: Implement simple DMA memory allocator |
| |
| Implement dma_alloc_coherent() which returns cache-aligned |
| uncacheable memory. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 91975b0fea773c9e681fea8cf3349669f27685ee |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 15:46:02 2006 +0100 |
| |
| Import <linux/mii.h> from the Linux kernel |
| |
| Instead of creating yet another set of MII register definitions |
| in the macb driver, here's a complete set of definitions for everyone |
| to use. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 1b804b229556a4d862da93c0ec94e79419364b2c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Mar 21 19:47:36 2007 +0100 |
| |
| AVR32: Include more commands for ATSTK1000 |
| |
| Include the imi, imls and jffs commands sets by default on ATSTK1000. |
| Also define CONFIG_BOOTARGS to something more useful, define |
| CONFIG_BOOTCOMMAND and enable autoboot by default. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Mar 21 19:44:48 2007 +0100 |
| |
| AVR32: Provide a definition of struct stat |
| |
| Copy the definition of struct stat from the Linux kernel. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 12f099c08167a7a51aeee623bc16dafd0841271c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 14:46:06 2006 +0100 |
| |
| AVR32: Use initdram() instead of board_init_memories() |
| |
| Conform to the "standard" interface and use initdram() instead of |
| board_init_memories() on AVR32. This enables us to get rid of the |
| sdram_size member of the global_data struct as well. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Nov 20 15:53:10 2006 +0100 |
| |
| AVR32: Relocate u-boot to SDRAM |
| |
| Relocate the u-boot image into SDRAM like everyone else does. This |
| means that we can handle much larger .data and .bss than we used to. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit df548d3c3e2bbc40258713167859ffc2ce99a900 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Nov 19 18:06:53 2006 +0100 |
| |
| AVR32: Resource management rewrite |
| |
| Rewrite the resource management code (i.e. I/O memory, clock gating, |
| gpio) so it doesn't depend on any global state. This is necessary |
| because this code is heavily used before relocation to RAM, so we |
| can't write to any global variables. |
| |
| As an added bonus, this makes u-boot's memory footprint a bit smaller, |
| although some functionality has been left out; all clocks are enabled |
| all the time, and there's no checking for gpio line conflicts. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 18:01:13 2006 +0100 |
| |
| AVR32: Clean up memory-map.h for at32ap7000 |
| |
| Convert spaces to tabs (must have missed this one last time around), |
| sort the entries by address and group them together by bus |
| connectivity. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 28c699ef69f4b6cdf252e4747b7b590028a88981 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:32:31 2006 +0100 |
| |
| AVR32: Build position-independent u-boot |
| |
| Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot |
| position independent. This will make relocation a lot easier. |
| |
| -mno-init-got means that gcc shouldn't emit code to load the GOT |
| address into r6 in every function prologue. We do it once and for |
| all in the early startup assembly code, so enabling this option |
| makes u-boot a bit faster and smaller. |
| |
| The assembly parts have always been position-independent, so no code |
| changes should be necessary. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5374b36de91d006d1df9536259fa9f66b01aa3aa |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:24:31 2006 +0100 |
| |
| AVR32: Use avr32-linux- cross-compilation prefix by default |
| |
| It doesn't really matter which toolchain you use to compile u-boot, |
| but the avr32-linux one is probably what most people have installed. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c841beeddebece0039e724fb27f4d1a39ee1c6b6 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:15:30 2006 +0100 |
| |
| AVR32: Split start_u_boot into board_init_f and board_init_r |
| |
| Split the avr32 initialization code into a function to run before |
| relocation, board_init_f and a function to run after relocation, |
| board_init_r. For now, board_init_f simply calls board_init_r |
| at the end. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sat Apr 14 05:26:48 2007 +0200 |
| |
| [Fix] Set the LED status register on the UC101 for the LXT971 PHY. |
| clear the Display after reset. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 7882751c78b7ecabfd49b0eff8de27661c71f16c |
| Author: Denis Peter <d.peter@mpl.ch> |
| Date: Fri Apr 13 09:13:33 2007 +0200 |
| |
| [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c |
| |
| Fix bug introduced by "Fix get_partition_info() parameter error in all |
| other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented |
| to use diskboot or scsiboot form another device than 0. |
| |
| Signed-off-by: Denis Peter <d.peter@mpl.ch> |
| |
| commit 0b94504d22e70f537c17a0d38c87edb6e370977d |
| Author: Greg Lopp <lopp@pobox.com> |
| Date: Fri Apr 13 08:02:24 2007 +0200 |
| |
| [PATCH] Fix use of "void *" for block dev read/write buffer pointers |
| |
| Signed-of-by: Greg Lopp <lopp@pobox.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9 |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Fri Mar 9 19:08:25 2007 +0800 |
| |
| Fix two bugs for MPC83xx DDR2 controller SPD Init |
| |
| There are a few bugs in the cpu/mpc83xx/spd_sdram.c |
| the first bug is that the picos_to_clk routine introduces a huge |
| rounding error in 83xx. |
| the second bug is that the mode register write recovery field is |
| tWR-1, not tWR >> 1. |
| |
| commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Thu Apr 12 14:15:59 2007 +0200 |
| |
| ppc4xx: Fix i2c divisor calcularion for PPC4xx |
| |
| This patch fixes changes the i2c_init(...) function to use the function |
| get_OPB_freq() rather than calculating the OPB speed by |
| sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is |
| specific per processor. The prior method was not and so was calculating |
| the wrong speed for some PPC4xx processors. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6c9ba919375db977aaad9146bf320c7afd07ae7a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 11 17:25:01 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 51056dd9863e6a1bc363afbbe1775c58cd967418 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 11 17:22:55 2007 +0200 |
| |
| Update for SC3 board |
| |
| * Make IDE timeout configurable through ide_reset_timeout variable. |
| * Use Newline as "password" string |
| * Use just a single partition in NAND flash |
| |
| commit 3d98b85800c80dc68227c8f10bf5c93456d6d054 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Mon Jan 22 12:37:30 2007 -0600 |
| |
| Add PIXIS FPGA support for MPC8641HPCN board. |
| |
| Move the 8641HPCN's PIXIS code to the new directory |
| board/freescale/common/ as it will be shared by |
| future boards not in the same processor family. |
| |
| Write a "pixis_reset" command that utilizes the FPGA |
| reset sequencer to support alternate soft-reset options |
| such as using the "alternate" flash bank, enabling |
| the watch dog, or choosing different CPU frequencies. |
| |
| Add documentation for the pixis_reset to README.mpc8641hpcn. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 6 14:19:43 2007 -0400 |
| |
| Moved fdt command support code to fdt_support.c |
| |
| ...in preparation for improving the bootm command's handling of fdt blobs. |
| Also cleaned up some coding sloppiness. |
| |
| commit 6679f9299534e488a171a9bb8f9bb891de247aab |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 6 14:17:14 2007 -0400 |
| |
| libfdt: Make fdt_check_header() public |
| |
| Changed _fdt_check_header() to fdt_check_header() and made it part of |
| the interface - it is a useful routine. |
| |
| Also did some asthetics cleanup to the include files (headers). |
| |
| commit c0707ce65677650b5ceab0500ee50ae5168afef2 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:34:06 2007 +0800 |
| |
| [Blackfin][PATCH] Kill off a bunch of common local prototypes |
| |
| commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:33:04 2007 +0800 |
| |
| [Blackfin][PATCH] Fix dynamic CPLB generation issue |
| |
| commit 0445e3a264251d75b1be45ef713c70726a2952f0 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:31:47 2007 +0800 |
| |
| [Blackfin][PATCH] minior cleanup |
| |
| commit 155fd766573981090e638b493d5857562151862e |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:31:18 2007 +0800 |
| |
| [Blackfin][PATCH] Fix copyright and update license |
| |
| commit 9fd437bbd75d282f899e1da50be20a2bf38450bc |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:30:25 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF537 EMAC driver initialization |
| |
| commit 889256e8604e0c68db1d866d720894dffede9df6 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:29:55 2007 +0800 |
| |
| [Blackfin][PATCH] call real the system synchronize instruction |
| |
| commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:29:17 2007 +0800 |
| |
| [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it |
| |
| commit dfeeab2cd680df047e68e723b246adf6f33bb556 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:28:34 2007 +0800 |
| |
| [Blackfin][PATCH]: fix flash unaligned copy issue |
| |
| commit 443feb740584e406efa203af909fe2926608e8d5 |
| Author: Igor Marnat <marny@rambler.ru> |
| Date: Wed Mar 21 09:55:01 2007 +0300 |
| |
| Update usage of 'nc' in README.NetConsole |
| |
| Added information about usage of NetConsole on systems where the -l and -p |
| switches are mutually exclusive. |
| |
| Signed-off-by: Igor Marnat <marny@rambler.ru> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 31c98a88228021b314c89ebb8104fb6473da4471 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 4 02:09:30 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| commit 94abd7c0583ebe01e799b25f451201deeaab550d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 4 01:49:15 2007 +0200 |
| |
| Minor cleanup. |
| |
| commit 822af351ad2babc7d99033361a5fcacd30f6bc78 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Tue Apr 3 14:27:18 2007 +0200 |
| |
| Support for the Philips ISP116x HCD (Host Controller Driver) |
| |
| Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> |
| |
| commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Apr 3 14:27:08 2007 +0200 |
| |
| USB: cleanup monahans usb support. Remove dead code. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit a65c5768e5537530bd1780af3d3fddc3113a163c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 2 10:09:30 2007 +0200 |
| |
| ppc4xx: Change SysACE address on Katmai |
| |
| With this new base address of the Xilinx SystemACE controller |
| the Linux driver will be easier to adapt, since it can now be |
| mapped via the "normal" ioremap() call. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 14:30:53 2007 -0400 |
| |
| Fix some minor whitespace violations. |
| |
| commit 213bf8c822de8eecaf69860684469cdaba2e9e6a |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:23:51 2007 -0400 |
| |
| Add a flattened device tree (fdt) command (2 of 2) |
| |
| Modifications to the existing code to support the new fdt command. |
| |
| commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:22:10 2007 -0400 |
| |
| Add a flattened device tree (fdt) command (1 of 2) |
| |
| The fdt command uses David Gibson's libfdt library to manipulate as well |
| as print the flattened device tree. This patch is the new command, |
| the second part is the modifications to the existing code. |
| |
| commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:13:43 2007 -0400 |
| |
| libfdt: Enhanced and published fdt_next_tag() |
| |
| Enhanced the formerly private function _fdt_next_tag() to allow stepping |
| through the tree, used to produce a human-readable dump, and made |
| it part of the published interface. |
| Also added some comments. |
| |
| commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:05:39 2007 -0400 |
| |
| libfdt: Customizations for use by u-boot. |
| |
| Changes to David Gibson's original source to fit into u-boot's |
| environment. No functionality changes. |
| |
| commit 35748177c64a4a83a00057e93bb33e40278a2a96 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:00:56 2007 -0400 |
| |
| libfdt: Import libfdt source (2 of 2) |
| |
| This adds the applicable libfdt source files (unmodified) and a README |
| to explain where the source came from. |
| |
| commit 7cd5da0fe877e7171a4cdd44880bce783132871a |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 11:59:59 2007 -0400 |
| |
| libfdt: Import libfdt source (1 of 2) |
| |
| This adds the applicable libfdt source files (unmodified) and a README |
| to explain where the source came from. |
| |
| commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 13:16:23 2007 +0200 |
| |
| ppc4xx: Update Katmai bootstrap command |
| |
| Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB |
| is selected. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cabee756a6532986729477c3cc1ea16ef8517ad2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 13:15:06 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Additional RAM information is now printed upon powerup, like |
| DDR2 frequency and CAS latency. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 60723803431ac75cad085690789e433d5ab9174e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:48:36 2007 +0200 |
| |
| ppc4xx: Change Yucca config file to support ECC |
| |
| With the updated 44x DDR2 driver the Yucca board now supports |
| ECC generation and checking. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 490e5730c674b20d708b783a2c5ffd7208f83873 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:47:34 2007 +0200 |
| |
| ppc4xx: Fix "bootstrap" command for Katmai board |
| |
| The board specific "bootstrap" command is now fixed and can |
| be used for the AMCC Katmai board to configure different |
| CPU/PLB/OPB frequencies. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:46:08 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Fix a bug in the auto calibration routine. This driver now runs |
| more reliable with the tested modules. It's also tested with |
| 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 342cd097be1e7affe82f42ab3da220959a699e64 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 30 22:52:09 2007 +0200 |
| |
| [PATCH] Clean include dependence |
| |
| commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 30 22:42:45 2007 +0200 |
| |
| [CLEAN] Remove inefficient Suzaku code |
| |
| commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 28 15:03:16 2007 +0200 |
| |
| Merge some AMCC make targets to keep the top-level Makefile smaller |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 28 14:52:12 2007 +0200 |
| |
| i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined |
| |
| The "old" i2c commands (iprobe, imd...) are now compiled in again, |
| even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE |
| config option. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Mar 27 00:32:16 2007 +0200 |
| |
| PATCH: Resolve GPL license problem |
| |
| commit ae00bb4b2944dc64a485ed72a19754b11af7c223 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Mar 26 12:03:36 2007 +0200 |
| |
| PXA: pxa27x USB OHCI support |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit ae79f60677c208326535647dcbd5c3ec40dbcb0b |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Mar 26 11:21:05 2007 +0200 |
| |
| USB: remove the S3C24X0_merge #define, which was introduced while |
| merging OHCI drivers. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 1798049522f594013aea29457d46794298c6ae15 |
| Author: Michal Simek <root@monstr.eu> |
| Date: Mon Mar 26 01:39:07 2007 +0200 |
| |
| Support for XUPV2P board |
| Reset support |
| BSP autoconfig support |
| |
| commit 0d974d5297349504a2ddfa09314be573b5df320a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:57:09 2007 +0100 |
| |
| [PATCH] Add 4xx GPIO functions |
| |
| This patch adds some 4xx GPIO functions. It also moves some of the |
| common code and defines into a common 4xx GPIO header file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:55:58 2007 +0100 |
| |
| [PATCH] Small Sequoia cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:45:34 2007 +0100 |
| |
| [PATCH] Clean up 40EZ/Acadia support |
| |
| This patch cleans up all the open issue of the preliminary |
| Acadia support. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Dec 12 11:02:20 2006 -0600 |
| |
| Fix 8641HPCN problem with ld version 2.16 |
| |
| (Dot outside sections problem). |
| |
| This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Thu Dec 7 10:35:55 2006 -0600 |
| |
| Set Rev 2.x 86xx PIC in mixed mode. |
| |
| Prevent false interrupt from hanging Linux as MSR[EE] is set |
| to enable interrupts by changing the PIC out of the default |
| pass through mode into mixed mode. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e |
| Author: Jason Jin <jason.jin@freescale.com> |
| Date: Thu Dec 7 10:32:35 2006 -0600 |
| |
| Add flash cmd function to 8641HPCN ramboot |
| |
| Also fixes some commmand for 8641 HPCN ramboot case. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46 |
| Author: Ed Swarthout <ed.swarthout@freescale.com> |
| Date: Thu Dec 7 10:34:14 2006 -0600 |
| |
| Add support for 8641 Rev 2 silicon. |
| |
| Without this patch, I am unable to get to the prompt on rev 2 silicon. |
| Only set ddrioovcr for rev1. |
| |
| Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 44ba464b99001f8bd1c456a1e9d59726252f707a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 22 00:13:12 2007 +0100 |
| |
| Code cleanup / re-insert previous Copyright entries. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 21 23:26:15 2007 +0100 |
| |
| Code cleanup. Update CHANGELOG |
| |
| commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 14:54:29 2007 +0100 |
| |
| ppc4xx: Fix file mode of include/configs/acadia.h |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d5f4614c9350d9333e575100fb250aab774d0258 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Mar 21 14:41:46 2007 +0100 |
| |
| SPC1920: fix small clock routing bug |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 16c0cc1c82081a493ab87c51980b28336ce1bce8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 13:39:57 2007 +0100 |
| |
| [PATCH] Add AMCC Acadia (405EZ) eval board support |
| |
| This patch adds support for the new AMCC Acadia eval board. |
| |
| Please note that this Acadia/405EZ support is still in a beta stage. |
| Still lot's of cleanup needed but we need a preliminary release now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e01bd218b00af73499331a1a701625a852cd286f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 13:38:59 2007 +0100 |
| |
| [PATCH] Add AMCC PPC405EZ support |
| |
| This patch adds support for the new AMCC 405EZ PPC. It is in |
| preparation for the AMCC Acadia board support. |
| |
| Please note that this Acadia/405EZ support is still in a beta stage. |
| Still lot's of cleanup needed but we need a preliminary release now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Wed Mar 21 08:45:17 2007 +0100 |
| |
| [PATCH] TQM8272: dont change the bits given from the HRCW |
| for the SIUMCR and BCR Register. |
| Fix the calculation for the EEprom Size |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 654589873dbafcf104dff133ce0d03a4506e9cc3 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Tue Mar 20 18:16:24 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF561 EZKIT board support |
| |
| commit a6154fd1cfd020f6da8527e0365b1020a11a71d0 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 22:55:58 2007 +0800 |
| |
| [Blackfin][PATCH] minor cleanup |
| |
| commit 389b6bb50f745bf5038ce030300d8a8512e96f79 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Mar 19 13:10:08 2007 +0100 |
| |
| Remove obsoleted POST files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 01:26:11 2007 +0800 |
| |
| [PATCH] Add flash chip M29W320ET/B support |
| |
| commit 26bf7deca364a5b33f39e8f14ddd3f4081345015 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 01:24:52 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF537 stamp board support |
| |
| commit 8423e5e31a7235d05a482627315fb11d49c17bd7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 16 21:11:42 2007 +0100 |
| |
| [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board |
| |
| Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the |
| DDR memory are dynamically programmed matching the total size |
| of the equipped memory (DIMM modules). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 76d1466f918b881cda2d259254761e73885093c2 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Mar 13 13:38:05 2007 +0100 |
| |
| [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405 |
| boards in terms of unification. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 13 16:05:55 2007 +0100 |
| |
| Make SC3 board build with 'make O='; use 'addcons' consistently |
| (SC3 and Jupiter used to use 'addcon' instead). |
| |
| Signed-off-by: Wolfgang Denk wd@denx.de |
| |
| commit 8502e30a28e492c756ea2d7df0ace026388fce4b |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Mar 13 09:40:59 2007 +0100 |
| |
| [PATCH] update board config for jupiter Board: |
| added Hush Shell, |
| CONFIG_CMDLINE_EDITING, |
| CFG_ENV_ADDR_REDUND activated |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 0d93de11449390a5984b0236c3612e50f6dbb7e8 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 12:11:55 2007 +0800 |
| |
| [Blackfin][PATCH] minor cleanup |
| |
| commit bfa5754a58477ac917d21527cd0f079d87cf188e |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 01:42:06 2007 +0800 |
| |
| [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue |
| |
| commit 8440bb14581a294375c34b91b42512f9753d1130 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 00:25:14 2007 +0800 |
| |
| [Blackfin][PATCH] code cleanup |
| |
| commit cfc67116a706fd18b8f6a9c11a16753c5626d689 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Mar 11 13:48:24 2007 +0100 |
| |
| [Microblaze][PATCH] part 2 |
| timer support |
| interrupt controller support |
| flash support |
| ethernet support |
| cache support |
| board information support |
| env support |
| booting image support |
| |
| adding support for Xilinx ML401 |
| |
| commit 76316a318de91f6184e7c22a10e02d275ade2441 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Mar 11 13:42:58 2007 +0100 |
| |
| [Microblaze][PATCH] |
| timer support |
| interrupt controller support |
| flash support |
| ethernet support |
| cache support |
| board information support |
| env support |
| booting image support |
| |
| adding support for Xilinx ML401 |
| |
| commit 8db13d63157811c839d15a313d9f2d2f5fd10af3 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Sat Mar 10 23:49:29 2007 +0800 |
| |
| [Blackfin][PATCH] code cleanup |
| |
| commit ef26a08fef928b7bc11ae2c109e638dc3a016d91 |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Fri Mar 9 13:40:56 2007 +0800 |
| |
| [Blackfin][PATCH-2/2] Common files changed to support bf533 platform |
| |
| commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Fri Mar 9 13:38:44 2007 +0800 |
| |
| [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support |
| |
| commit 992423ab43c2bcf6b704853bd00af77450915e20 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 23:00:08 2007 +0100 |
| |
| ppc4xx: Fix file mode of sequoia.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb92f613556800f7483666db09d9a237ad911d4a |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Mar 8 22:52:51 2007 +0100 |
| |
| Minor cleanup. |
| |
| commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1 |
| Author: John Otken john@softadvances.com <john@softadvances.com> |
| Date: Thu Mar 8 09:39:48 2007 -0600 |
| |
| ppc4xx: Clear Sequoia/Rainier security engine reset bits |
| |
| Signed-off-by: John Otken john@softadvances.com <john@softadvances.com> |
| |
| commit 650a330dd2539130c8c324791e2f9f75aed79d4e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:26:52 2007 +0100 |
| |
| [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d9fc703246840c4b268debf48c334ba55c597dc0 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:25:47 2007 +0100 |
| |
| [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ced5b9029043397348cdc88e0cfcd6b1f629250b |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:23:11 2007 +0100 |
| |
| [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d8a8ea5c476d37006fc7f85b7f903142795c8b14 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:20:32 2007 +0100 |
| |
| [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit f9fc6a5852a6335840882fa2111925010eea1abe |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Mar 7 15:32:01 2007 +0100 |
| |
| fixed ethernet phy configuration for plu405 board |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 769104c9356594deb2092e204a39c05b33202d6c |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Mar 8 21:49:27 2007 +0100 |
| |
| Minor cleanup |
| |
| commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:13:16 2007 +0100 |
| |
| [PATCH] Update AMCC Luan 440SP eval board support |
| |
| The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR |
| inititializition. This includes DDR auto calibration and support |
| for different DIMM modules, instead of the fixed setup used in |
| the earlier version. |
| |
| This patch also enables the cache in FLASH for the startup |
| phase of U-Boot (while running from FLASH). After relocating to |
| SDRAM the cache is disabled again. This will speed up the boot |
| process, especially the SDRAM setup, since there are some loops |
| for memory testing (auto calibration). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2f5df47351910a2936c7741cf111855829200943 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:10:18 2007 +0100 |
| |
| [PATCH] Update AMCC Yucca 440SPe eval board support |
| |
| The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR |
| inititializition. This includes DDR auto calibration and support |
| for different DIMM modules, instead of the fixed setup used in |
| the earlier version. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2721a68a9ea91f1e494649ce68b2577261f578e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:07:18 2007 +0100 |
| |
| ppc4xx: Small AMCC Katmai 440SPe update |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df294497479b1dca6dd86318b2a912f72fede0df |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:06:09 2007 +0100 |
| |
| ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 83853178bd36bca6f0f8f1331476620c84a587fc |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Mar 7 12:14:50 2007 -0600 |
| |
| net - Support ping reply when processing net-loop |
| |
| Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY. |
| |
| This permits the ping command to test the phy interface when the phy |
| is put in loopback mode (typically by setting register 0 bit 14). |
| |
| It also allows the port to respond to an external ping when u-boot is |
| processing some other net command (such as tftp). This is useful when |
| tftp appears to hang. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit fa1aef15bcd47736687be1af544506e90fba545d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 7 16:43:00 2007 +0100 |
| |
| [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board |
| |
| Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the |
| DDR memory are dynamically programmed matching the total size |
| of the equipped memory (DIMM modules). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e2ebe696818939e2b974628be9c921ea3fe9de13 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 7 16:39:36 2007 +0100 |
| |
| [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's |
| |
| This patch fixes a problem that occurs when 2 DIMM's are |
| used. This problem was first spotted and fixed by Gerald Jackson |
| <gerald.jackson@reaonixsecurity.com> but this patch fixes the |
| problem in a little more clever way. |
| |
| This patch also adds the nice functionality to dynamically |
| create the TLB entries for the SDRAM (tlb.c). So we should |
| never run into such problems with wrong (too short) TLB |
| initialization again on these platforms. |
| |
| As this feature is new to the "old" 44x SPD DDR driver, it |
| has to be enabled via the CONFIG_PROG_SDRAM_TLB define. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 39218433983417b9df087976a79e3f80dd5e83d6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 7 16:33:44 2007 +0100 |
| |
| UC101: fix compiler warnings |
| |
| commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Mar 7 16:19:46 2007 +0100 |
| |
| HMI1001: fix build error, cleanup compiler warnings. |
| |
| commit ad5bb451ade552c44bef9119d907929ebc2c126f |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Mar 6 18:08:43 2007 +0100 |
| |
| Restructure POST directory to support of other CPUs, boards, etc. |
| |
| commit a5284efd125967675b2e9c6ef7b95832268ad360 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Mar 6 18:01:47 2007 +0100 |
| |
| Fix HOSTARCH handling. |
| Patch by Mike Frysinger, Mar 05 2007 |
| |
| commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 6 07:47:04 2007 +0100 |
| |
| [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup |
| |
| As provided by the AMCC applications team, this patch optimizes the |
| DDR2 setup for 166MHz bus speed. The values provided are also save |
| to use on a "normal" 133MHz PLB bus system. Only the refresh counter |
| setup has to be adjusted as done in this patch. |
| |
| For this the NAND booting version had to include the "speed.c" file |
| from the cpu/ppc4xx directory. With this addition the NAND SPL image |
| will just fit into the 4kbytes of program space. gcc version 4.x as |
| provided with ELDK 4.x is needed to generate this optimized code. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Mar 4 01:36:05 2007 +0100 |
| |
| Some code cleanup. |
| |
| commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 28 00:02:04 2007 -0600 |
| |
| mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings |
| |
| (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit) |
| |
| commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Feb 27 23:51:42 2007 -0600 |
| |
| mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode |
| |
| The config value for: |
| * CFG_ACR_PIPE_DEP |
| * CFG_ACR_RPTCNT |
| * CFG_SPCR_TSEC1EP |
| * CFG_SPCR_TSEC2EP |
| * CFG_SCCR_TSEC1CM |
| * CFG_SCCR_TSEC2CM |
| |
| Were not being used when setting the appropriate register |
| |
| Added: |
| * CFG_SCCR_USBMPHCM |
| * CFG_SCCR_USBDRCM |
| * CFG_SCCR_PCICM |
| * CFG_SCCR_ENCCM |
| |
| To allow full config of the SCCR. |
| |
| Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 |
| that were just bogus. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d51b3cf371cd441030460ef19d36b2924c361b1a |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Feb 22 20:06:57 2007 -0600 |
| |
| mpc83xx: update [local-]mac-address properties on UEC based devices |
| |
| 8360 and 832x weren't updating their [local-]mac-address |
| properties. This patch fixes that. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 61f4f912acbe60776c5e00df1ec94094ce672957 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Feb 13 10:41:42 2007 -0600 |
| |
| mpc83xx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, this patch |
| updates ftp_cpu_setup() to write the MAC address to mac-address if it exists. |
| This function already updates local-mac-address. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 22d71a71f57fd5d38b27ac3848e50d790360a598 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Feb 27 18:41:08 2007 -0600 |
| |
| mpc83xx: add command line editing by default |
| |
| commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 14 19:50:53 2007 -0600 |
| |
| mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers |
| |
| Disable G1TXCLK, G2TXCLK h/w buffers. This patch |
| fixes a networking timeout issue with MPC8360EA (Rev.2) PBs. |
| |
| Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com> |
| |
| commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:27:17 2007 +0800 |
| |
| mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx |
| |
| The code supply fixed and SPD initialization for MPC83xx DDR2 Controller. |
| it pass DDR/DDR2 compliance tests. |
| |
| Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> |
| |
| commit b110f40bd180c6b560276589beedf753e97c46ce |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:27:06 2007 +0800 |
| |
| mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS |
| |
| MPC8360E rev2.0 have new spridr,and PVR value, |
| The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. |
| |
| Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> |
| |
| commit 8d172c0f0d85998a256a95b7459a5403a30380ed |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:26:44 2007 +0800 |
| |
| mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS |
| |
| MPC8349E rev3.1 have new spridr,and PVR value, |
| The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. |
| |
| Signed-off-by: Xie Xiaobo<X.Xie@freescale.com> |
| |
| commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b |
| Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> |
| Date: Wed Jan 31 11:04:19 2007 +0100 |
| |
| mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c |
| |
| Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0) |
| which is used to se if an slave will ACK after receiving its address. |
| |
| Correct i2c probing to use this method as the old method could upset |
| a slave as it wrote a data byte to it. |
| |
| Add a small delay in i2c_init() to let the controller |
| shutdown any ongoing I2C activity. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit 7a78f148d6a7298e4fface680dc7eacd877b1aba |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 31 15:54:29 2007 -0600 |
| |
| mpc83xx: Add support for the MPC8349E-mITX-GP |
| |
| Add support for the MPC8349E-mITX-GP, a stripped-down version of the |
| MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in |
| HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit fab16807adad350f618024350c6950165c247c72 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 31 15:54:20 2007 -0600 |
| |
| mpc83xx: Delete sdram_init() for MPC8349E-mITX |
| |
| There is no SDRAM on any of the 8349 ITX variants, so function sdram_init() |
| never does anything. This patch deletes it. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit a87c856eb411b9365937d0d4b9c21e46adbe1c14 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Jan 19 10:43:26 2007 +0800 |
| |
| mpc83xx: Fix the LAW1/3 bug |
| |
| The patch solves the alignment problem of the local bus access windows to |
| render accessible the memory bank and PHY registers of UPC 1 (starting at |
| 0xf801 0000). What we actually did was to adjust the sizes of the bus |
| access windows so that the base address alignment requirement would be met. |
| |
| Signed-off-by: Chereji Marian <marian.chereji@freescale.com> |
| Signed-off-by: Gridish Shlomi <gridish@freescale.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 97c4b397dce236a7318b304667bf89e59d08b17c |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:31 2007 -0600 |
| |
| mpc83xx: don't hang if watchdog configured on 8360, 832x |
| |
| don't hang if watchdog configured on 8360, 832x |
| |
| The watchdog programming model is the same across all 83xx devices; |
| make the code reflect that. |
| |
| commit b70047478570e371ce7223be342ce98afea0f7d6 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:21 2007 -0600 |
| |
| mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt |
| |
| protect memcpy to bad address if a local-mac-address is missing from dt |
| |
| commit 6752ed088c75c26a89b70c46b7326a4cd6015f29 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:04 2007 -0600 |
| |
| mpc83xx: make 8360 default environment fdt be 8360 (not 8349) |
| |
| make 8360 default environment fdt be 8360 (not 8349) |
| |
| commit a28899c910024a0226331df07207b1038c300c93 |
| Author: Emilian Medve <Emilian.Medve@freescale.com> |
| Date: Tue Jan 30 16:14:50 2007 -0600 |
| |
| mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC |
| |
| The problem is not gcc4 but the code itself. The BD_STATUS() macro can't |
| be used for busy-waiting since it strips the 'volatile' property from |
| the bd variable. gcc3 was working by pure luck. |
| |
| This is a follow on patch to "Fix the UEC driver bug of QE" |
| |
| commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jan 30 14:08:30 2007 -0600 |
| |
| mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead |
| |
| The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all |
| MPC834X class processors. Change the protections from CONFIG_MPC8349 to |
| CONFIG_MPC834X so they are more generic. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ae246dc6c1937c291014eadd90b6d48c438c7cb0 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Jan 25 13:40:55 2007 -0600 |
| |
| mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL |
| |
| commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 24 17:18:37 2007 -0600 |
| |
| mpc83xx: sort Makefile targets |
| |
| reordered targets alphabetically |
| |
| commit 91e25769771c1164ed63ffca0add49f934ae3343 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Tue Jan 16 11:38:14 2007 -0500 |
| |
| mpc83xx: U-Boot support for Wind River SBC8349 |
| |
| I've redone the SBC8349 support to match git-current, which |
| incorporates all the MPC834x updates from Freescale since the 1.1.6 |
| release, including the DDR changes. |
| |
| I've kept all the SBC8349 files as parallel as possible to the |
| MPC8349EMDS ones for ease of maintenance and to allow for easy |
| inspection of what was changed to support this board. Hence the SBC8349 |
| U-Boot has FDT support and everything else that the MPC8349EMDS has. |
| |
| Fortunately the Freescale updates added support for boards using CS0, |
| but I had to change spd_sdram.c to allow for board specific settings for |
| the sdram_clk_cntl (it is/was hard coded to zero, and that remains the |
| default if the board doesn't specify a value.) |
| |
| Hopefully this should be mergeable as-is and require no whitespace |
| cleanups or similar, but if something doesn't measure up then let me |
| know and I'll fix it. |
| |
| Thanks, |
| Paul. |
| |
| commit 05031db456ab227f3e3752f37b9b812b65bb83ad |
| Author: Sam Song <samsongshu@yahoo.com.cn> |
| Date: Thu Dec 14 19:03:21 2006 +0800 |
| |
| mpc83xx: Remove a redundant semicolon in mpc8349itx.c |
| |
| A redundant semicolon existed in mpc8349itx.c |
| should be removed. |
| |
| Signed-off-by: Sam Song <samsongshu@yahoo.com.cn> |
| |
| commit f35f358241c549be3f75cfe2eaa642914275b7ba |
| Author: Jerry Van Baren <gerald.vanbaren@comcast.net> |
| Date: Wed Dec 6 21:23:55 2006 -0500 |
| |
| mpc83xx: Put the version (and magic) after the HRCW. |
| |
| Put the version (and magic) after the HRCW. This puts it in a fixed |
| location in flash, not at the start of flash but as close as we can get. |
| |
| Signed-off-by: Jerry Van Baren <vanbaren@cideas.com> |
| |
| commit 48aecd969171a6e99a55fae04933857787f9a5bd |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:14:51 2006 +0800 |
| |
| mpc83xx: Add the MPC832XEMDS board readme |
| |
| Add the MPC832XEMDS board readme |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 24c3aca3f1358b113d3215adb5433b156e99f72b |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:13:15 2006 +0800 |
| |
| mpc83xx: Add support for the MPC832XEMDS board |
| |
| This patch supports DUART, ETH3/4 and PCI etc. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit e080313c32322e15ab5a18eb896a252858c57284 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:11:58 2006 +0800 |
| |
| mpc83xx: streamline the 83xx immr head file |
| |
| For better format and style, I streamlined the 83xx head files, |
| including immap_83xx.h and mpc83xx.h. In the old head files, 1) |
| duplicated macro definition appear in the both files; 2) the structure |
| of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The |
| macro definition put inside the each structure. So, I cleaned up the |
| structure of QE immr from immap_83xx.h, deleted the duplicated stuff and |
| moved the macro definition to mpc83xx.h, Just like MPC8260. |
| |
| CHANGELOG |
| |
| *streamline the 83xx immr head file |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Dec 6 11:38:17 2006 +0800 |
| |
| mpc83xx: Fix the UEC driver bug of QE |
| |
| The patch prevents the GCC tool chain from striping useful code for |
| optimization. It will make UEC ethernet driver workable, Otherwise the |
| UEC will fail in tx when you are using gcc4.x. but the driver can work |
| when using gcc3.4.3. |
| |
| CHANGELOG |
| |
| *Prevent the GCC from striping code for optimization, Otherwise the UEC |
| will tx failed when you are using gcc4.x. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 1 21:11:36 2007 +0100 |
| |
| [PATCH] Update AMCC Katmai 440SPe eval board support |
| |
| This patch updates the recently added Katmai board support. The biggest |
| change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2 |
| driver. |
| |
| Please note, that still some problems are left with some memory |
| configurations. See the driver for more details. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 1 07:03:25 2007 +0100 |
| |
| [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ccbc7036648e465697ca298ba51e0e76dda352a0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Feb 28 01:28:53 2007 +0100 |
| |
| SC3: fix typo in default environment |
| |
| commit e344568b1b46af85ec32d815586f91bc115d6223 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue Feb 27 20:15:30 2007 +0300 |
| |
| MCC200: Fixes for update procedure |
| |
| - fix logic error in image type handling |
| - make sure file system images (cramfs etc.) get stored in flash |
| with image header stripped so they can be mounted through MTD |
| |
| commit 743571145b37182757d4e688a77860b36ee77573 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Feb 27 14:26:04 2007 +0100 |
| |
| Minor code cleanup. |
| |
| commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue Feb 27 12:40:16 2007 +0300 |
| |
| MCC200 update - add LCD Progress Indicator |
| |
| commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 22 07:43:34 2007 +0100 |
| |
| [PATCH] get_dev() now unconditionally uses manual relocation |
| |
| Since the relocation fix is not included yet and we're not sure how |
| it will be added, this patch removes code that required relocation |
| to be fixed for now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 22 07:40:23 2007 +0100 |
| |
| [PATCH] Change systemace driver to select 8 & 16bit mode |
| |
| As suggested by Grant Likely this patch enables the Xilinx SystemACE |
| driver to select 8 or 16bit mode upon startup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3a197b2fe49d6fa03978e60af2394efe9c70b527 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Feb 21 16:52:31 2007 +0100 |
| |
| [PATCH v3] Add sync to ensure flash_write_cmd is fully finished |
| |
| Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command |
| is fully finished. The sync() is defined in each CPU's io.h file. For |
| those CPUs which do not need sync for now, a dummy sync() is defined in |
| their io.h as well. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit da04995c7dc6772013a9a0dc5c767f190c402478 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Feb 21 13:44:34 2007 +0100 |
| |
| [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 751bb57107d78978ae08e697c3deba816f5be091 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:21:57 2007 +0100 |
| |
| [PATCH] Fix relocation problem with "new" get_dev() function |
| |
| This patch enables the "new" get_dev() function for block devices |
| introduced by Grant Likely to be used on systems that still suffer |
| from the relocation problems (manual relocation neede because of |
| problems with linker script). |
| |
| Hopefully we can resolve this relocation issue soon for all platform |
| so we don't need this additional code anymore. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d93e2212f962668b3dce091ff5edc33f2347fe37 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:17:42 2007 +0100 |
| |
| [PATCH] Update SystemACE driver for 16bit access |
| |
| This patch removes some problems when the Xilinx SystemACE driver |
| is used with 16bit access on an big endian platform (like the |
| AMCC Katmai). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 874bb7b88fe9b4648e1288a387af2e31014a72f3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:15:40 2007 +0100 |
| |
| [PATCH] Clean up Katmai (440SPe) linker script |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:57:08 2007 +0100 |
| |
| [PATCH] Add support for the AMCC Katmai (440SPe) eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dc018ece13effc689e47479ea9ebf1c98a507f5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:51:26 2007 +0100 |
| |
| [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT |
| |
| This patch switches to the desired I2C bus when the date/dtt |
| commands are called. This can be configured using the |
| CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4037ed3b63923cfcec27f784a89057c3cbabcedb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:43:34 2007 +0100 |
| |
| [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support |
| |
| This patch adds support for the DDR2 controller used on the |
| 440SP and 440SPe. It is tested on the Katmai (440SPe) eval |
| board and works fine with the following DIMM modules: |
| |
| - Corsair CM2X512-5400C4 (512MByte per DIMM) |
| - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) |
| - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) |
| |
| This patch also adds the nice functionality to dynamically |
| create the TLB entries for the SDRAM (tlb.c). So we should |
| never run into such problems with wrong (too short) TLB |
| initialization again on these platforms. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 36d830c9830379045f5daa9f542ac1c990c70068 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:35:42 2007 +0100 |
| |
| [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files |
| |
| Since the existing 4xx SPD SDRAM initialization routines for the |
| 405 SDRAM controller and the 440 DDR controller don't have much in |
| common this patch splits both drivers into different files. |
| |
| This is in preparation for the 440 DDR2 controller support (440SP/e). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:27:08 2007 +0100 |
| |
| [PATCH] PPC4xx: Add support for multiple I2C busses |
| |
| This patch adds support for multiple I2C busses on the PPC4xx |
| platforms. Define CONFIG_I2C_MULTI_BUS in the board config file |
| to make use of this feature. |
| |
| It also merges the 405 and 440 i2c header files into one common |
| file 4xx_i2c.h. |
| |
| Also the 4xx i2c reset procedure is reworked since I experienced |
| some problems with the first access on the 440SPe Katmai board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb867a76238fb38e952c37871b16d0d7fd61c95f |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:45 2007 +0100 |
| |
| [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers |
| |
| Block device read/write is anonymous data; there is no need to use a |
| typed pointer. void * is fine. Also add a hook for block_read functions |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 53758fa20e935cc87eeb0519ed365df753a6f289 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:38 2007 +0100 |
| |
| [PATCH 8_9] Add block_write hook to block_dev_desc_t |
| |
| Preparation for future patches which support block device writing |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f4852ebe6ca946a509667eb68be42026f837be76 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:31 2007 +0100 |
| |
| [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros |
| |
| Register read/write does not need to be wrapped in a full function. The |
| patch replaces them with macros. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 3a8ce9af6fcb5744a7851b4440c07688acc40844 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:23 2007 +0100 |
| |
| [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c |
| |
| The code in this file is not a command; it is a device driver. Put it in |
| the correct place. There are zero functional changes in this patch, it |
| only moves the file. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:16 2007 +0100 |
| |
| [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent) |
| |
| This patch is in preparation of additional changes to the sysace driver. |
| May as well take this opportunity to fixup the inconsistent whitespace since |
| this file is about to undergo major changes anyway. |
| |
| There are zero functional changes in this patch. It only cleans up the |
| the whitespace. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 80ba981d940471fe7e539e64fa3d2bd80002beda |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:07 2007 +0100 |
| |
| [PATCH 4_4] Remove local implementation of isprint() in ft_build.c |
| |
| isprint is already defined in ctype.c |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c95c4280d751ca078c2ff58228d2f2b44ccf0600 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:00 2007 +0100 |
| |
| [PATCH 3_9] Move buffer print code from md command to common function |
| |
| Printing a buffer is a darn useful thing. Move the buffer print code |
| into print_buffer() in lib_generic/ |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:04:52 2007 +0100 |
| |
| [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets |
| |
| Change the xilinx device drivers and board code to include config.h |
| instead of xparameters.h directly. config.h always includes the |
| correct xparameters file. This change reduces the posibility of |
| including the wrong file when adding a new xilinx board port |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:04:34 2007 +0100 |
| |
| [PATCH 1_4] Merge common get_dev() routines for block devices |
| |
| Each of the filesystem drivers duplicate the get_dev routine. This change |
| merges them into a single function in part.c |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f5fcc3c20b65554e98a165542c36ee0c610a2d81 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Feb 19 23:09:51 2007 +0100 |
| |
| MCC200: Software Updater: allow both "ramdisk" and "filesystem" types |
| as root file system images. |
| |
| commit 489c696ae7211218961d159e43e722d74c36fcbc |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Wed Feb 14 14:30:28 2007 +0300 |
| |
| MCC200: Extensions to Software Update Mechanism |
| |
| Update / extend Software Update Mechanism for MCC200 board: |
| |
| - Add support for rootfs image added. The environment variables |
| "rootfs_st" and "rootfs_nd" can be used to override the default |
| values of the image start and end. |
| - Remove excessive key check code. |
| - Code cleanup. |
| |
| commit 4be23a12f23f1372634edc3215137b09768b7949 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Feb 19 08:23:15 2007 +0100 |
| |
| [PATCH] Update Sequoia EBC configuration (NOR FLASH) |
| |
| As spotted by Matthias Fuchs, the READY input should not be |
| enabled for the NOR FLASH on the Sequoia board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2605e90bf676d48123afe5719a846d2b52b24aac |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Feb 16 07:57:42 2007 +0100 |
| |
| [PATCH] Added support for the jupiter board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 497d012e5be0194e1084073d0081eb1a844796b2 |
| Author: Gary Jennejohn <garyj@pollux.denx.de> |
| Date: Mon Feb 12 13:11:50 2007 +0100 |
| |
| LPC2292: patch from Siemens. |
| |
| commit b0b1a920aebead0d44146e73676ae9d80fffc8e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Feb 10 08:49:31 2007 +0100 |
| |
| [PATCH] Add missing p3mx.h file to repository (ups) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Feb 9 10:45:42 2007 +0100 |
| |
| [Motion-PRO] Preliminary support for the Motion-PRO board. |
| |
| commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Feb 7 16:51:08 2007 +0100 |
| |
| [PATCH] Update some AMCC 4xx board config files (set initrd_high) |
| |
| Some boards that can have more than 768MBytes of SDRAM need to |
| set "initrd_high", so that the initrd can be accessed by the |
| Linux kernel. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7372ca68227930d03cffa548310524cad5b96733 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Feb 2 12:44:22 2007 +0100 |
| |
| [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards |
| |
| Previously the strapping DCR/SDR was read to determine if the internal PCI |
| arbiter is enabled or not. This strapping bit can be overridden, so now |
| the current status is read from the correct DCR/SDR register. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2aa54f651a42d198673318f07a20c89a43e4d197 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Feb 2 12:42:08 2007 +0100 |
| |
| [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 1 13:22:41 2007 +0100 |
| |
| [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file |
| |
| When PCI PNP is enabled the pci pnp configuration routine is called |
| which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some |
| problems with some PCI cards. For now disable the PCI PNP configuration. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2902fadade3be7659467e8d074048c6b7068f5c0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:56:10 2007 +0100 |
| |
| [PATCH] Update 440EPx/440GRx cpu detection |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d5ea287b02a6945c3977410e364a879dd1a555c8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:38:04 2007 +0100 |
| |
| [PATCH] Update esd cpci5200 files |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| |
| commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:37:34 2007 +0100 |
| |
| [PATCH] Add support for esd mecp5200 board |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| |
| commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 12:38:50 2007 +0100 |
| |
| [PATCH] Remove unneccessary yellowstone board config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e802594b6fa1b166308820c276b96dc0d7cc731c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 17:06:10 2007 +0100 |
| |
| [PATCH] Update Sequoia (440EPx) config file |
| |
| The config file now handles the 2nd target, the Rainier (440GRx) |
| evaluation board better. Additionally the PPC input clock was |
| adjusted to match the correct value of 33.0 MHz. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 700200c67e73b83751418abe7815840dca8fd6cb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 17:04:19 2007 +0100 |
| |
| [PATCH] Merge Yosemite & Yellowstone board ports |
| |
| Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) |
| share one config file and all board specific files. This way we |
| don't have to maintain two different sets of files for nearly |
| identical boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 15:01:49 2007 +0100 |
| |
| [PATCH] Update Prodrive SCPU (PDNB3 variant) board |
| |
| SCPU doesn't use redundant environment in flash. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6304430ed642ea8fa15c9e5af965ac2e033eec45 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 12:51:07 2007 +0100 |
| |
| [PATCH] alpr: Update alpr board config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f8db84f132b1e335f20f96138a1f09ed97b08664 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 30 00:50:40 2007 +0100 |
| |
| LPC2292 SODIMM port coding style cleanup. |
| |
| commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 |
| Author: Gary Jennejohn <garyj@pollux.denx.de> |
| Date: Wed Jan 24 12:16:56 2007 +0100 |
| |
| Add port for the lpc2292sodimm evaluation board from EmbeddedArtists |
| |
| commit 2daf046ba627f85f44195815778140039636244e |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 17:22:06 2007 +0100 |
| |
| [iDMR] Add MTD and JFFS2 support, also add default partition definition. |
| |
| commit f7db33101fbc9c8f0a10738ce87034875a17aeb9 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 14:21:14 2007 +0100 |
| |
| [iDMR] Flash driver on initialisation write-protects some sectors, |
| currently sectors 0-3. Sector 3 does not need to be protected, though |
| (U-boot occupies sectors 0-1 and the environment sector 2). This commit |
| fixes this, i.e., only sectors 0-2 are protected. |
| |
| commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 14:11:22 2007 +0100 |
| |
| [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., |
| "mii device" results in "Unexpected exception"). Fixing this properly |
| requires some clean-up in the FEC drivers infrastructure for ColdFire, so |
| this commit disables MII commads for now. |
| |
| commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 13:25:22 2007 +0100 |
| |
| [ColdFire MCF5271 family] Add CPU detection based on the value of Chip |
| Identification Register (CIR). |
| |
| commit fdef388758506765d4d6a7155c8f1584c63ff581 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Jan 22 13:19:21 2007 +0800 |
| |
| use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP |
| The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 |
| fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support |
| mpc7448hpc2 board. |
| |
| commit a4012396645533aef218354eeba754dff0deace8 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Jan 19 23:08:39 2007 +0100 |
| |
| Minor code cleanup. |
| |
| commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jan 19 19:57:10 2007 +0100 |
| |
| [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jan 19 18:05:26 2007 +0100 |
| |
| [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver |
| if you must swap the bytes between reading/writing. |
| (Needed for the SC3 board) |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 16:05:47 2007 +0100 |
| |
| [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 11:54:52 2007 +0100 |
| |
| [PATCH] Update Prodrive P3Mx support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 34167a36c29ee946b727465db5c014746a08e978 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 11:48:10 2007 +0100 |
| |
| [PATCH] Add missing Taishan config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cb4820725e9fc409c5cbc8e83054a6ed522d2111 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Jan 18 11:28:51 2007 +0100 |
| |
| [PATCH] Fix: Compilerwarnings for SC3 board. |
| The EBC Configuration Register is now by CFG_EBC_CFG definable |
| Added JFFS2 support for the SC3 board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 10:25:34 2007 +0100 |
| |
| [PATCH] Add support for AMCC Taishan PPC440GX eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 16 18:30:50 2007 +0100 |
| |
| Raname solidcard3 into sc3; add redundant env for sc3 |
| |
| commit 1bbbbdd20fcec9933697000dcf55ff7972622596 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 16 12:46:35 2007 +0100 |
| |
| Update default environment for Solidcard3 |
| |
| commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jan 15 09:46:29 2007 +0100 |
| |
| [PATCH] Fix 440SPe rev B detection from previous patch |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a443d31410c571ee8f970da819a44d698fdd6b1f |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sun Jan 14 13:35:31 2007 +0100 |
| |
| [FIX] correct I2C Writes for the LM81 Sensor. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 0bba5452835f19a61204edcda3a58112fd8e2208 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Jan 13 11:17:10 2007 +0100 |
| |
| Undo commit 3033ebb2: reset command does not take any arguments |
| |
| Haiying Wang's modification to the reset command was broken, undo it. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 95981778cff0038fd9941044d6a3eda810e33258 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 08:01:03 2007 +0100 |
| |
| [PATCH] Update 440SP(e) cpu revisions |
| |
| Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:59:56 2007 +0100 |
| |
| [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Also the EBC initialising is now done via defines in the board config |
| file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 36adff362c2c0141ff8a810d42a7e478f779130f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:59:19 2007 +0100 |
| |
| [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Also the EBC initialising is now done via defines in the board config |
| file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:57:51 2007 +0100 |
| |
| [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ca43ba18e910206ef8063e4b22d282630bff3fd2 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Jan 11 15:44:44 2007 +0100 |
| |
| Added support for the SOLIDCARD III board from Eurodesign |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 |
| Author: Reinhard Thies <Reinhard.Thies@web.de> |
| Date: Wed Jan 10 14:41:14 2007 +0100 |
| |
| Adjusted default environment for cam5200 board. |
| |
| commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jan 10 15:35:52 2007 +0100 |
| |
| Update CHANGELOG |
| |
| commit 787fa15860a57833e50bd30555079a9cd4e519b8 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jan 10 01:28:39 2007 +0100 |
| |
| Fix auto_update for MCC200 board. |
| |
| The invocation of do_auto_update() is moved to the end of the |
| misc_init_r() function, after the flash mappings have been |
| initialized. Please find attached a patch that implements that |
| change. |
| |
| Also correct the decoding of the keypad status. With this update, the |
| key that will trigger the update is Column 2, Row 2. |
| |
| commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Jan 10 00:26:15 2007 +0100 |
| |
| CAM5200 flash driver modifications: |
| - use CFI driver (replaces custom flash driver) for main 'cam5200' target |
| - add second build target 'cam5200_niosflash' which still uses custom driver |
| |
| commit 67fea022fa957f59653b5238c7496f80a6b70432 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 16:02:48 2007 +0100 |
| |
| SPC1920: cleanup memory contoller setup |
| |
| commit 8fc2102faa23593c80381437c09f7745a14deb40 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:14 2007 +0100 |
| |
| Fix the cpu speed setup to work with all boards. |
| |
| commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| SPC1920: add support for the FM18L08 Ramtron FRAM |
| |
| commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| SPC1920: update the HPI register addresses to work with the second |
| generation of hardware |
| |
| commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| Miscellanious spc1920 related cleanups |
| |
| commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:12 2007 +0100 |
| |
| SPC1920 GO/NOGO led should be set to color red in U-Boot |
| |
| commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:12 2007 +0100 |
| |
| Add support for the DS3231 RTC |
| |
| commit 8139567b60d678584b05f0718a681f2047c5e14f |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:11 2007 +0100 |
| |
| SMC1 uses external CLK4 instead of BRG on spc1920 |
| |
| commit d8d9de1a02fbd880b613d607143d1f57342affc7 |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Update the SPC1920 CMB PLD driver |
| |
| commit 3f34f869162750e5e999fd140f884f5de952bcfe |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Add / enable I2C support on the spc1920 board |
| |
| commit d28707dbce1e9ac2017ad051da4133bf22b4204f |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Add support for the tms320671x host port interface (HPI) |
| |
| commit f4eb54529bb3664c3a562e488b460fe075f79d67 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Jan 7 00:13:11 2007 +0100 |
| |
| Prepare for release 1.2.0 |
| |
| commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 6 15:58:09 2007 +0100 |
| |
| [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) |
| |
| This patch fixes a problem with an incorrect setup for the refresh |
| timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f16c1da9577f06c5fc08651a4065537407de4635 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 6 15:56:13 2007 +0100 |
| |
| [PATCH] Update ALPR board files |
| |
| This update brings the ALPR board support to the newest version. |
| It also fixes a problem with the NAND driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cd1d937f90250a32988c37b2b4af8364d25de8ed |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 11:46:05 2007 +0100 |
| |
| [PATCH] nand: Fix problem with oobsize calculation |
| |
| Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: |
| |
| The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part |
| returns a 0x15. In the code fragment below bits [1:0] determine the |
| page size, it is ANDed via "(extid & 0x3)" then shifted out. The |
| next field is also ANDed with 0x3. However this is a one bit field |
| as defined in the Hynix and Samsung parts in the 4th ID byte that |
| determins the oobsize, not a two bit field. It works on Samsung as |
| bits[3:2] are 01. However for the Hynix there is a 11 in these two |
| bits, so the oob size gets messed up. |
| |
| I checked the correct linux code and the suggested fix from Brian is |
| also available in the linux nand mtd driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 10:40:36 2007 +0100 |
| |
| [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) |
| |
| This fix will make the MAL burst disabling patch for the Linux |
| EMAC driver obsolete. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 023889838282b6237b401664f22dd22dfba2c066 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 10:38:05 2007 +0100 |
| |
| [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board |
| |
| This code will optimize the DDR2 controller setup on a board specific |
| basis. |
| |
| Note: This code doesn't work right now on the NAND booting image for the |
| Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cce4acbb68398634b8d011ed7bb0d12269c84230 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Dec 28 19:08:21 2006 +0100 |
| |
| Few V38B changes: |
| - fix a typo in V38B config file |
| - move watchdog initialisation earlier in the boot process |
| - add "wdt=off" to default kernel command line (disables kernel watchdog) |
| |
| commit 92eb729bad876725aeea908d2addba0800620840 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Dec 27 01:26:13 2006 +0100 |
| |
| Fix bug in adaption of Stefano Babic's CFI driver patch. |
| |
| commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Dec 24 01:42:57 2006 +0100 |
| |
| Minor code cleanup. |
| |
| commit d784fdb05900ada3686d5778783e1fb328e9fb66 |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Tue Dec 12 00:22:42 2006 +0100 |
| |
| Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) |
| |
| commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 22 14:29:40 2006 +0100 |
| |
| [PATCH] Fix sequoia flash autodetection (finally correct) |
| |
| Now 32MByte and 64MByte FLASH is know to work and other |
| configurations should work too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 82e5236a8b719543643fd26d5827938ab2b94818 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Dec 22 10:30:26 2006 +0100 |
| |
| Minor code cleanup; update CHANGELOG. |
| |
| commit fa23044564091f05d9695beb7b5b9a931e7f41a4 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Dec 21 17:17:02 2006 +0100 |
| |
| Added support for the TQM8272 board from TQ |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Dec 21 16:14:48 2006 +0100 |
| |
| [PATCH] Add support for the UC101 board from MAN. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit c84bad0ef60e7055ab0bd49b93069509cecc382a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Dec 20 00:29:43 2006 +0100 |
| |
| Fix to make the baudrate changes immediate for the MCF52x2 family. |
| |
| commit daa6e418bcc0c717752e8de939c213c790286096 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Dec 20 00:27:32 2006 +0100 |
| |
| Preliminary support for the iDMR board (ColdFire). |
| |
| commit cdb97a6678826f85e7c69eae6a1c113d034c9b10 |
| Author: Andrei Safronov <safronov@pollux.denx.de> |
| Date: Fri Dec 8 16:23:08 2006 +0100 |
| |
| automatic update mechanism |
| |
| commit 9d27b3a0685ff99fc477983f315c04d49f657a8a |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 17:56:59 2006 +0800 |
| |
| Slight code clean up. |
| Add comments, delete duplicate define and remove spaces. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 17:54:21 2006 +0800 |
| |
| Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original |
| multiplier table can not refect the real PLL clock behavior of these |
| processors. Please refer to the hardware specification for detailed |
| information of the corresponding processors. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 14:46:23 2006 +0800 |
| |
| Remove the static MAC address, ip address, server ip, netmask and |
| gateway ip for network setting. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 14:33:08 2006 +0800 |
| |
| Remove the duplicate memory test code for mpc744ihpc2 board. |
| If a memory test is needed, please use the functions in |
| post/memory.c or memtest command. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit c9c1eeed7dd193fa65fb194654132040d49d4d3a |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Dec 1 19:01:25 2006 +0800 |
| |
| Fix the exception occuring in RAM table search issue. |
| The original search_one_table() function code can only processes the search |
| for the exception occurring in FLASH/ROM, because the exception and fixup |
| table usually locate in FLASH. If the exception address is also in |
| FLASH, it will be OK. |
| If the exception occurs in RAM, after the u-boot relocation, a |
| relocation offset should be added. |
| |
| clean up the code in cpu/74xx_7xx/cpu.c |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit ee311214e0d216f904feea269599d0934bf71f23 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Dec 1 11:47:36 2006 +0800 |
| |
| Clean up the code according to codestyle: |
| (1) remove some C++ comments. |
| (2) remove trailing white space. |
| (3) remove trailing empty line. |
| (4) Indentation by table. |
| (5) remove {} in one line condition. |
| (6) add space before '(' in function call. |
| Remove some weird printf () output. |
| Add necessary comments. |
| Modified Makefile to support building in a separate directory. |
| |
| commit dd520bf314c7add4183c5191692180f576f96b60 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 30 18:02:20 2006 +0100 |
| |
| Code cleanup. |
| |
| commit 8d9a8610b8256331132227e9e6585c6bd5742787 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 30 01:54:07 2006 +0100 |
| |
| Code cleanup. Update CHANGELOG. |
| |
| commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Nov 29 16:23:42 2006 +0100 |
| |
| [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals |
| |
| The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, |
| not the XLB frequency. |
| |
| This patch depends on the previous patches for MPC52xx device tree support |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Signed-off-by: Sylvain Munaut <tnt@246tNt.com> |
| |
| commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 15:42:37 2006 +0100 |
| |
| [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards |
| |
| This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) |
| and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are |
| quite similar and share the same board directory "prodrive/p3mx" |
| and the same config file "p3mx.h". |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1bdd46832aeb569f5e04b1f20f64318525b6525a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 12:53:15 2006 +0100 |
| |
| [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command |
| |
| In the bootvx command the load address was only read from the env |
| variable "loadaddr" and not optionally passed as paramter as described |
| in the help. This is fixed with this patch. The behaviour is now the |
| same as in the bootelf command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 12:03:57 2006 +0100 |
| |
| [PATCH] include/ppc440.h minor error affecting interrupts |
| |
| Fixed include/ppc440.c for UIC address Bug |
| |
| Corrects bug affecting the addresses for the universal interrupt |
| controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. |
| |
| Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Tue Nov 28 16:17:27 2006 -0600 |
| |
| Make fsl-i2c not conflict with SOFT I2C |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 14198bf768fdc958e3c1afd2404e5262208e98d7 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Tue Nov 28 16:17:18 2006 -0600 |
| |
| Fix I2C master address initialization. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 28 23:31:19 2006 -0600 |
| |
| Assign maintainers for mpc8349emds and mpc8360emds |
| |
| Dave for mpc8360emds, and me for mpc8349emds. |
| |
| commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 28 23:28:33 2006 -0600 |
| |
| Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c |
| |
| give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src |
| since they are passed by reference to ucc_get_cmxucr_reg and assigned. |
| |
| commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Nov 28 12:09:35 2006 -0600 |
| |
| mpc83xx: Miscellaneous code style fixes |
| |
| Implement various code style fixes and similar changes. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 17:55:49 2006 +0100 |
| |
| [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. |
| |
| This patch adds the code and configuration necessary to boot with an |
| arch/powerpc Linux kernel. |
| |
| Signed-off-by: Grant Likely <grant.likely@gmail.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e732faec95a83cb468b4850ae807c8301dde8f6a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 16:09:24 2006 +0100 |
| |
| [PATCH] PPC4xx: 440SP Rev. C detection added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 11:04:45 2006 +0100 |
| |
| [PATCH] nand: Fix patch merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 11:04:45 2006 +0100 |
| |
| [PATCH] nand: Fix patch merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 27 22:53:53 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit f6e495f54cdb8fe340b9c03deab40ad746d52fae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:43:25 2006 +0100 |
| |
| [PATCH] 4xx_enet.c: Correct the setting of zmiifer register |
| |
| Patch below corrects the setting of the zmiifer register, it was |
| overwritting the register rather than ORing the settings. |
| |
| Signed-off-by: Neil Wilson <NWilson@airspan.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d1a72545296800b7e219f93104ad5836f0003d66 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:34:10 2006 +0100 |
| |
| [PATCH] Select NAND embedded environment from board configuration |
| |
| The current NAND Bootloader setup forces the environment |
| variables to be in line with the bootloader. This change |
| enables the configuration to be made in the board include |
| file instead so that it can be individually enabled. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 15784862857c3c2214498defcfed84ff137fb81e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:22:19 2006 +0100 |
| |
| [PATCH] nand_wait() timeout fixes |
| |
| Two fixes for the nand_wait() function in |
| drivers/nand/nand_base.c: |
| |
| 1. Use correct timeouts. The original timeouts in Linux |
| source are 400ms and 20ms not 40s and 20s |
| |
| 2. Return correct error value in case of timeout. 0 is |
| interpreted as OK. |
| |
| Signed-off-by: Rui Sousa <rui.sousa@laposte.net> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit da5553b095bf04f4f109ad7e565dae3aba47b230 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:04:06 2006 +0100 |
| |
| [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel |
| |
| This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 |
| arguments to bootm. It removes the getenv("disable_of") test that used |
| to be used for this purpose. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a9398e018593782c5fa7d0741955fc1256b34c1e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 27 15:32:42 2006 +0100 |
| |
| Minor code cleanup. Update CHANGELOG. |
| |
| commit 1729b92cde575476684bffe819d0b7791b57bff2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:52:04 2006 +0100 |
| |
| [PATCH] 4xx: Fix problem with board specific reset code (now for real) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:49:51 2006 +0100 |
| |
| [PATCH] alpr: remove unused board specific flash driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:48:41 2006 +0100 |
| |
| [PATCH] 4xx: Fix problem with board specific reset code |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ec0c2ec725aec9524a177a77ce75559e644a931a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:46:06 2006 +0100 |
| |
| [PATCH] Remove testing 4xx enet PHY setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:12:17 2006 +0100 |
| |
| [PATCH] Update Prodrive ALPR board support (440GX) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 58b485776698c3d71ec5a215e392123b4c15afa3 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:51:21 2006 +0100 |
| |
| Add a small README with information on the generic ohci driver. |
| |
| commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:46:46 2006 +0100 |
| |
| Fix some endianness issues related to the generic ohci driver |
| |
| commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:44:58 2006 +0100 |
| |
| Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able |
| to choose between the old and the generic OHCI drivers. |
| |
| commit 53e336e9ffc51035bdc4e5867631b3378761b4df |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:43:09 2006 +0100 |
| |
| Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver |
| and adapted board configs TQM5200 and yosemite accordingly. This commit |
| also makes the maximum number of root hub ports configurable |
| (CFG_USB_OHCI_MAX_ROOT_PORTS). |
| |
| commit 78d620ebb5871d252270dedfad60c6568993b780 |
| Author: Wolfgang Denk <wd@atlas.denx.de> |
| Date: Thu Nov 23 22:58:58 2006 +0100 |
| |
| Updates for TQM5200 modules: |
| - fix off-by-one error in board/tqm5200/cam5200_flash.c error message |
| - simplify "udate" definitions |
| |
| commit 2053283304eeddf250d109e6791eb6fa4cad14f7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 22 13:20:50 2006 +0100 |
| |
| [PATCH] PPC4xx start.S: Fix for processor errata |
| |
| Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx |
| errata 1.12: 440_33 by moving patch up in code. |
| |
| Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4ef6251403f637841000e0fef9e832aa01339822 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 20 20:39:52 2006 +0100 |
| |
| [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 20 10:28:30 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 13 13:55:24 2006 +0100 |
| |
| [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] |
| |
| * Adds support for AMD command set Top Boot flash geometry reversal |
| * Adds support for reading JEDEC Manufacturer ID and Device ID |
| * Adds support for displaying command set, manufacturer id and |
| device ids (flinfo) |
| * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined |
| * Removes outdated change history (refer to git log instead) |
| |
| Signed-off-by: Tolunay Orkun <listmember@orkun.us> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b21b511d4c50408f4853f46f06b601272196223f |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Nov 12 21:13:23 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sat Nov 11 22:48:22 2006 +0100 |
| |
| Disable the watchdog in the default config for the V38B board. |
| |
| commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sat Nov 11 22:43:00 2006 +0100 |
| |
| Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin |
| group is enabled for USB earlier (in cpu_init_f() instead of |
| usb_lowlevel_init()). |
| |
| commit 91650b3e4de688038d4f71279c44858e3e2c6870 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 6 17:06:36 2006 +0100 |
| |
| Sequential accesses to non-existent memory must be synchronized, |
| at least on G2 cores. |
| |
| This fixes get_ram_size() problems on MPC5200 Rev. B boards. |
| |
| commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Nov 3 19:15:00 2006 -0600 |
| |
| mpc83xx: Update 83xx to use fsl_i2c.c |
| |
| Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete |
| cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. |
| Added multiple I2C bus support to fsl_i2c.c. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit d239d74b1c937984bc519083a8e7de373a390f06 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Nov 3 12:00:28 2006 -0600 |
| |
| mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR |
| |
| Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx |
| tree matches the other 8xxx trees. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit f7fb2e703ec9688541416962724adff70a7322cb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Nov 2 19:47:11 2006 -0600 |
| |
| mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c |
| |
| commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Thu Nov 2 18:05:50 2006 -0600 |
| |
| mpc83xx: Fix the incorrect dcbz operation |
| |
| The 834x rev1.x silicon has one CPU5 errata. |
| |
| The issue is when the data cache locked with |
| HID0[DLOCK], the dcbz instruction looks like no-op inst. |
| |
| The right behavior of the data cache is when the data cache |
| Locked with HID0[DLOCK], the dcbz instruction allocates |
| new tags in cache. |
| |
| The 834x rev3.0 and later and 8360 have not this bug inside. |
| |
| So, when 834x rev3.0/8360 are working with ECC, the dcbz |
| instruction will corrupt the stack in cache, the processor will |
| checkstop reset. |
| |
| However, the 834x rev1.x can work with ECC with these code, |
| because the sillicon has this cache bug. The dcbz will not |
| corrupt the stack in cache. |
| Really, it is the fault code running on fault sillicon. |
| |
| This patch fix the incorrect dcbz operation. Instead of |
| CPU FP writing to initialise the ECC. |
| |
| CHANGELOG: |
| * Fix the incorrect dcbz operation instead of CPU FP |
| writing to initialise the ECC memory. Otherwise, it |
| will corrupt the stack in cache, The processor will checkstop |
| reset. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Nov 1 00:10:40 2006 -0600 |
| |
| mpc83xx: add OF_FLAT_TREE bits to 83xx boards |
| |
| add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and |
| STDOUT_PATH configuration bits to mpc8349emds, |
| mpc8349itx, and mpc8360emds board code. |
| |
| redo environment to use bootm with the fdtaddr |
| for booting ARCH=powerpc kernels by default, |
| and provide default fdtaddr values. |
| |
| commit 48041365b3420589ad464ebc7752e0053538b729 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Nov 1 00:07:25 2006 -0600 |
| |
| mpc83xx: change ft code to modify local-mac-address property |
| |
| Update 83xx OF code to update local-mac-address properties |
| for ethernet instead of the obsolete 'address' property. |
| |
| commit 9ca880a250870a7d55754291b5591d2b5fe89b54 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 21:23:16 2006 -0600 |
| |
| mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS |
| |
| This patch also adds an improved I2C set_speed(), which handles all clock |
| frequencies. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit ac4b5622ce050b5ee1e154b98df630d778661632 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:54:59 2006 -0600 |
| |
| mpc83xx: add the README.mpc8360emds |
| |
| add doc/README.mpc8360emds to accompany the new board support |
| |
| commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Nov 3 12:11:15 2006 -0600 |
| |
| mpc83xx: add QE ethernet support |
| |
| this patch adds support for the QUICC Engine based UCC gigabit ethernet device. |
| |
| commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Nov 3 19:33:44 2006 -0600 |
| |
| mpc83xx: Add MPC8360EMDS basic board support |
| |
| Add support for the Freescale MPC8360EMDS board. |
| Includes DDR, DUART, Local Bus, PCI. |
| |
| commit 23892e49352de74f7fac36ff90bb1be143d195e3 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:30:40 2006 -0600 |
| |
| mpc83xx: add the QUICC Engine (QE) immap file |
| |
| common QE immap file. Also required for 8360. |
| |
| commit b701652a4992bdcc62fb1a6038a85beef9e55da4 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:25:38 2006 -0600 |
| |
| mpc83xx: Add 8360 specifics to 83xx immap |
| |
| Mainly add QE device dependencies, with appropriate 8360 protection. |
| Lindent also run. |
| |
| commit 988833324a7fda482c8ac3ca23eb539f8232e404 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 19:14:41 2006 -0600 |
| |
| mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX |
| |
| PREREQUISITE PATCHES: |
| |
| * This patch can only be applied after the following patches have been applied: |
| |
| 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" |
| 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" |
| |
| CHANGELOG: |
| |
| * For the 8349E-mITX, fix some size values in pci_init_board(), enable |
| the clock for the 2nd USB board (Linux kernel will hang otherwise), |
| and fix the CONFIG_BOOTARGS macro. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 18:44:42 2006 -0600 |
| |
| mpc83xx: Add support for the MPC8349E-mITX |
| |
| PREREQUISITE PATCHES: |
| |
| * This patch can only be applied after the following patches have been applied: |
| |
| 1) DNX#2006090742000024 "Add support for multiple I2C buses" |
| 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" |
| 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" |
| 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" |
| 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" |
| |
| CHANGELOG: |
| |
| * Add support for the Freescale MPC8349E-mITX reference design platform. |
| The second TSEC (Vitesse 7385 switch) is not supported at this time. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 183da6d9b446cc12123455844ad1187e2375626f |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Tue Sep 12 10:15:53 2006 -0400 |
| |
| Additional MPC8349 support for multibus i2c |
| |
| Hello, |
| |
| Here is a patch for a file that was accidentally left out of a previous |
| attempt. |
| |
| It accompanies the patch with ticket DNX#2006090742000024 |
| |
| CHANGELOG: |
| Change PCI initialization to use new multi-bus I2C API. |
| |
| regards, |
| Ben |
| |
| commit b24f119d672b709d153ff2ac091d4aa63ec6877d |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Sep 7 16:51:04 2006 -0400 |
| |
| Multi-bus I2C implementation of MPC834x |
| |
| Hello, |
| |
| Attached is a patch implementing multiple I2C buses on the MPC834x CPU |
| family and the MPC8349EMDS board in particular. |
| This patch requires Patch 1 (Add support for multiple I2C buses). |
| Testing was performed on a 533MHz board. |
| |
| /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| CHANGELOG: |
| Implemented driver-level code to support two I2C buses on the |
| MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds |
| are 50kHz, 100kHz and 400kHz on each bus. |
| |
| regards, |
| Ben |
| |
| commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Sep 7 16:50:54 2006 -0400 |
| |
| Add support for multiple I2C buses |
| |
| Hello, |
| |
| Attached is a patch providing support for multiple I2C buses at the |
| command level. The second part of the patch includes an implementation |
| for the MPC834x CPU and MPC8349EMDS board. |
| |
| /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| Overview: |
| |
| 1. Include new 'i2c' command (based on USB implementation) using |
| CONFIG_I2C_CMD_TREE. |
| |
| 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that |
| the commands to change bus number and speed are only available under the |
| new 'i2c' command mentioned in the first bullet. |
| |
| 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus |
| systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form |
| of an array of bus-device pairs. Otherwise, it is an array of uchar. |
| |
| CHANGELOG: |
| Added new 'i2c' master command for all I2C interaction. This is |
| conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for |
| setting I2C bus speed as well as changing the active bus if the board |
| has more than one (conditionally compiled with |
| CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. |
| Updated README. |
| |
| regards, |
| Ben |
| |
| commit bed85caf872714ebf53013967a695c9d63acfc68 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 18:13:36 2006 -0600 |
| |
| mpc83xx: Add support for Errata DDR6 on MPC 834x systems |
| |
| CHANGELOG: |
| |
| * Errata DDR6, which affects all current MPC 834x processors, lists changes |
| required to maintain compatibility with various types of DDR memory. This |
| patch implements those changes. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit afd6e470f639883002c7c59d562690a5cb0f4865 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Oct 25 18:45:23 2006 -0500 |
| |
| mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it |
| |
| commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Aug 22 17:07:00 2006 -0500 |
| |
| mpc83xx: Add support for variable flash memory sizes on 83xx systems |
| |
| CHANGELOG: |
| |
| * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access |
| window registers, instead of using a hard-coded value of 8MB. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:38:13 2006 +0800 |
| |
| mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros |
| |
| Unified TQM834x variable names with 83xx and consolidated macro |
| in preparation for the 8360 and other upcoming 83xx devices. |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit f6eda7f80ccc13d658020268c507d7173cf2e8aa |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Wed Oct 25 14:41:21 2006 -0500 |
| |
| mpc83xx: Changed to unified mpx83xx names and added common 83xx changes |
| |
| Incorporated the common unified variable names and the changes in preparation |
| for releasing mpc8360 patches. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 3894c46c27c64891f93ac04edde86a9fa9758d92 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:36:02 2006 +0800 |
| |
| mpc83xx: Fix missing build for mpc8349emds pci.c |
| |
| Make pci build for mpc8349emds |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:39:49 2006 +0800 |
| |
| mpc83xx: Removed unused file resetvec.S for mpc83xx cpu |
| |
| Removed unused file resetvec.S for mpc83xx cpu |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf |
| Author: Nick Spence <Nick.Spence@freescale.com> |
| Date: Sat Sep 30 00:32:59 2006 -0700 |
| |
| NAND Flash verify across block boundaries |
| |
| This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is |
| defined |
| and the write crosses a block boundary. The pointer to the verification |
| buffer (bufstart) is not being updated to reflect the starting of the |
| new |
| block so the verification of the second block fails. |
| |
| CHANGELOG: |
| |
| * Fix NAND FLASH page verification across block boundaries |
| |
| commit f484dc791a3932537213c43c654cc1295c64b84c |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Thu Sep 7 07:39:46 2006 -0700 |
| |
| Added RGMII support to the TSECs and Marvell 881111 Phy |
| |
| Added a phy initialization to adjust the RGMII RX and TX timing |
| Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| |
| commit 4831c8b8a97799da77923d6bbb4c260c0d45521c |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Nov 3 13:10:00 2006 +0800 |
| |
| Remove some unused CFG define. |
| undef CFG_DRAM_TEST |
| |
| commit 99c09c4dec34f77c243bf51bea532e3f339410ad |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Nov 3 13:07:36 2006 +0800 |
| |
| Change the TEXT_BASE from 0xFFF00000 to 0xFF000000. |
| Both work. 0xFF000000 seems more reasonable. |
| |
| commit c59200443072353044aa4bf737a5a60f9a9af231 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 2 15:15:01 2006 +0100 |
| |
| Release U-Boot 1.1.6 |
| |
| commit c1fbe4103a0d6c8957f912af902d705ba67836f2 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:14:48 2006 +0800 |
| |
| This patch comes from Yuli's posted patch on 8/8/2006 |
| titled "CFI Driver Little-Endian write Issue". |
| |
| http://sourceforge.net/mailarchive/message.php?msg_id=36311999 |
| |
| If that patch applied, please discard this one. |
| Until now , I do not see his patch is applied. So please apply this one. |
| |
| Signed-off-by: Yuli Barcohen <yuli@arabellasw.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit b825f158e449e1e9cf74c08e572955e122394c96 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:12:31 2006 +0800 |
| |
| Tsi108 on chip i2c support. |
| |
| The i2c Interface provides a master-only, serial interface that can be |
| used for initializing Tsi108/Tsi109 registers from an EEPROM after a |
| device reset. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:11:06 2006 +0800 |
| |
| Tsi108 on chip pci controller support. |
| |
| If there is no pci card, the tsi108/109 pci configure read will |
| cause a machine check exception to the processor. PCI error should |
| also be cleared after the read. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit d1927cee977126e547ceeba23e4f978f377cfb8f |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:08:55 2006 +0800 |
| |
| Tundra tsi108 on chip Ethernet controller support. |
| |
| The following is a brief description of the Ethernet controller: |
| The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent |
| Gigabit Ethernet ports,E0 and E1. It uses a single Management interface |
| to manage the two physical connection devices (PHYs). Each Ethernet port |
| has its own statistics monitor that tracks and reports key interface |
| statistics. Each port supports a 256-entry hash table for address |
| filtering. In addition, each port is bridged to the Switch Fabric |
| through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. |
| |
| Each Ethernet port also has a pair of internal Ethernet DMA channels to |
| support the transmit and receive data flows. The Ethernet DMA channels |
| use descriptors set up in memory, the memory map of the device, and |
| access via the Switch Fabric. The Ethernet Controller?s DMA arbiter |
| handles arbitration for the Switch Fabric. The Controller also |
| has a register businterface for register accesses and status monitor |
| control. |
| |
| The PMD (Physical Media Device) interface operates in MII, GMII, or TBI |
| modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. |
| The GMII and TBI modes are used to connect with Gigabit PMDs. Internal |
| data flows to and from the Ethernet Controller through the Switch Fabric. |
| |
| Each Ethernet port uses its transmit and receive DMA channels to manage |
| data flows through buffer descriptors that are predefined by the |
| system (the descriptors can exist anywhere in the system memory map). |
| These descriptors are data structures that point to buffers filled |
| with data ready to transmit over Ethernet, or they point to empty |
| buffers ready to receive data from Ethernet. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:01:33 2006 +0800 |
| |
| Tundra tsi108 header file. |
| |
| The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for |
| PowerPC processors that offers numerous system interconnect options for |
| embedded application designers. The Tsi108 can interconnect 60x or |
| MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet, |
| and Flash. Provided the macro define for tsi108 chip. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 87c4db09699c6b89176b31004afcb83eb1585d47 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:59:15 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 27801b8ab11c61b577e45742a515bb3b23b80241 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:57:21 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| Make ,config.mk and link file for the mpc7448hpc2 board. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:55:04 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| The mpc7448hpc2 board support header file. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 625bb5ddb50b243f931262ca8c46956409471917 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:52:21 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| The mpc7448hpc2 board support low level assemble language init code. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4c52783b3d024e153c4972b97332e314bc3bdc46 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:49:51 2006 +0800 |
| |
| General code modification for mpc7448hpc2 board support. |
| 1. Add 7447A and 7448 processor support. |
| 2. Add the following flags. |
| |
| CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically |
| (such as by switch on board), this flag should be set. |
| |
| CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot |
| relocates to RAM, this flag should be set. |
| |
| CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the |
| system hang in exception, this flag should be set. |
| |
| There is a design issue for tsi108/109 pci configure read. When pci scan |
| the slots, if there is no pci card, the tsi108/9 will cause a machine |
| check exception for mpc7448 processor. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:34:47 2006 +0800 |
| |
| Add README file for mpc7448hpc2 board. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 02:04:38 2006 +0100 |
| |
| Finish up support for MarelV38B board |
| - add watchdog support |
| - enable GPIO_WKUP_7 pin for input |
| - code cleanup |
| |
| commit ffa150bc90c943ca265170bd1be3f293674dd5c7 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:45:46 2006 +0100 |
| |
| - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: |
| * remove warnings when compiling ethaddr.c |
| * adjust linker script (fixes a crash resulting from incorrect |
| definition of __u_boot_cmd_start) |
| - Some MarelV38B code cleanup. |
| |
| commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:38:16 2006 +0100 |
| |
| - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the |
| MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's |
| Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with |
| MPC5XXX_WU_GPIO_DATA_O for affected boards. |
| |
| - Add defintions for some MPC5XXX GPIO pins. |
| |
| commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:34:29 2006 +0100 |
| |
| Changed MarelV38B board make target to lowercase. Config file cleanup. |
| |
| commit 1954be6e9c9421b45d0a9d05b10356acc7563150 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Oct 29 01:03:51 2006 +0200 |
| |
| Automatically adjust ARFLAGS so "make -s" is really silent. |
| |
| commit fae684e89844856383bdf101440889557df3e6b1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 16:45:00 2006 +0200 |
| |
| [PATCH] omap925.c: Remove unused functions |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 17:12:58 2006 +0200 |
| |
| [PATCH] Add some missing machtypes for netstar & voiceblue boards |
| |
| Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of |
| numbers in code. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 856f054410cef52d868feb330168b2a4c4091328 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 15:55:52 2006 +0200 |
| |
| [PATCH] NAND: Partition name support added to NAND subsystem |
| |
| chpart, nboot and NAND subsystem related commands now accept also partition |
| name to specify offset. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:29:44 2006 +0200 |
| |
| Update CHANGELOG. |
| |
| commit 2751a95abd1b96911081c357e96a12fa97b40dee |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:29:14 2006 +0200 |
| |
| Enable commandline editing and hush shell on all TQM boards. |
| |
| commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:28:02 2006 +0200 |
| |
| README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE |
| |
| commit 471a7be7a042e95e440f5de969c9765214ae8d6e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 28 01:14:32 2006 +0200 |
| |
| Check for illegal character '=' in environment variable names. |
| |
| Make sure the string passed as variable name does not contain a '=' |
| character. This not only prevents the common error or typing |
| "setenv foo=bar" instead of "setenv foo bar", but (more importantly) |
| also closes a backdoor which allowed to delete write-protected |
| environment variables, for example by using "setenv ethaddr=". |
| |
| commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 00:38:39 2006 +0200 |
| |
| Minor code cleanup. |
| |
| commit e11887a77d81077416a2d1c5e0354916fee8c034 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Oct 26 17:55:31 2006 +0200 |
| |
| Don't pass any debug options directly to the assembler |
| |
| When passing the -g option to gcc, gcc automatically selects a |
| suitable --g<format> option to pass on to the assembler. |
| Thus, there's no point in forcing a specific debug option on the |
| assembler using the -Wa mechanism. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 27 07:47:22 2006 -0500 |
| |
| MPC86xx: Cleaned up unused and conditionally used local variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Oct 27 11:55:21 2006 +0200 |
| |
| Fix "ar" flags in some Makefiles to allow for silent "make -s" |
| |
| commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Oct 26 14:38:25 2006 -0400 |
| |
| Fix TSEC driver (now for real): avoid crashes if PHY is not attached |
| to a TSEC (e.g. a switch is connected via RMII) or |
| if the PHY is defective/incorrectly configured. |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999 |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Oct 26 14:38:25 2006 -0400 |
| |
| Fix TSEC driver: avoid crashes if PHY is not attached |
| to a TSEC (e.g. a switch is connected via RMII) or |
| if the PHY is defective/incorrectly configured. |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Oct 26 16:24:31 2006 +0200 |
| |
| Code cleanup. |
| |
| commit 5e3b0bc19f07ed277d85324ad0427642c8981baf |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Oct 25 15:48:59 2006 +0200 |
| |
| Finish up support for the ATSTK1000/ATSTK1002 boards |
| |
| Add atstk1002_config target to Makefile and move the AVR32 section |
| down below Blackfin so that it doesn't end up in the middle of |
| MIPS. |
| |
| Drop the autogenerated linker script thing for now. Will have to |
| revisit how to handle chips with different flash and RAM layout |
| later. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 24 23:47:37 2006 -0500 |
| |
| Added support for Multi-Image files that contain a device tree |
| |
| If a Multi-Image file contains a third image we try to use it as a |
| device tree. The device tree image is assumed to be uncompressed in the |
| image file. We automatically allocate space for the device tree in memory |
| and provide an 8k pad to allow more than a reasonable amount of growth. |
| |
| Additionally, a device tree that was contained in flash will now automatically |
| get copied to system memory as part of boot. Previously an error was |
| reported if one tried to boot a device tree that was in flash. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 24 21:35:55 2006 +0200 |
| |
| Switch to automatically generated CHANGELOG file. |
| (use "make CHANGELOG" to update it from time to time) |
| |
| commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 24 18:06:48 2006 +0200 |
| |
| Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c |
| Patch by Stefan Roese, 24 Oct 2006 |
| |
| commit 8ae3b713b2286e0c3213b7802062e4c1599010de |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 17:24:55 2006 +0200 |
| |
| Merge with /home/wd/git/u-boot/master |
| |
| commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 15:32:57 2006 +0200 |
| |
| Code cleanup |
| |
| commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:51:36 2006 +0200 |
| |
| Move atstk1000 files into vendor specific directory. |
| Patch by Haavard Skinnemoen, 12 Sep 2006 |
| |
| commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:42:37 2006 +0200 |
| |
| Add ATSTK1000 and ATSTK1002 board support |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This patch adds support for the ATSTK1000 with the ATSTK1002 CPU |
| daughterboard. |
| |
| ATSTK1000 is a full-featured development board for AT32AP CPUs. It |
| has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, |
| and connectors for USART, PS/2, VGA, USB, MMC/SD cards and |
| CompactFlash cards. For more information, please see this page: |
| |
| http://www.atmel.com/dyn/products/tools.asp?family_id=682 |
| |
| The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the |
| AT32AP7000 chip. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit f93ae788c3640fcde5db383471d45548ff4060d0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:31:24 2006 +0200 |
| |
| Add common serial driver for Atmel AT32 and AT91 chips |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This is a first attempt at creating a common serial driver for Atmel |
| chips. For now, it supports the AT32AP7000 AVR32 chip, but it should |
| be possible to support AT91RM9200 and other ARM-based chips with some |
| minor modifications. |
| |
| There's nothing fundamentally AVR32-specific in this driver, but it |
| does use some features which are currently only defined for the |
| AT32AP CPU port: |
| * pm_get_clock_freq: Obtain the clock frequency of a given domain |
| * gd->console_uart: A "struct device" containing information about |
| register mappings, gpio resources and clocks associated with the |
| UART device. |
| |
| For more information about these features, please see the "AT32AP |
| CPU" patch. |
| |
| commit 72a087e04705c26cad982879ebd06b5281bf825a |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:27:35 2006 +0200 |
| |
| Add AT32AP CPU and AT32AP7000 SoC support |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This patch adds support for the AT32AP CPU family and the AT32AP7000 |
| chip, which is the first chip implementing the AVR32 architecture. |
| |
| The AT32AP CPU core is a high-performance implementation featuring a |
| 7-stage pipeline, separate instruction- and data caches, and a MMU. |
| For more information, please see the "AVR32 AP Technical Reference": |
| |
| http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf |
| |
| In addition to this, the AT32AP7000 chip comes with a large set of |
| integrated peripherals, many of which are shared with the AT91 series |
| of ARM-based microcontrollers from Atmel. Full data sheet is |
| available here: |
| |
| http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7b64fef33c66be648826c0ff9758298ef13d0604 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:21:16 2006 +0200 |
| |
| Add AVR32 architecture support |
| Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 |
| |
| This patch adds common infrastructure code for the Atmel AVR32 |
| architecture. See doc/README.AVR32 for details. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2da2d9a4766063b9848f3a35ad6025499cf87265 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 13:57:33 2006 +0200 |
| |
| Use -g instead of -gstabs in AFLAGS_DEBUG |
| Patch by Haavard Skinnemoen, 30 Aug 2006 |
| |
| In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no |
| matter what the target's preferred debugging format is. This patch |
| simply replaces -gstabs with -g, so that the default debugging format |
| for the architecture is used. |
| |
| commit 965829872169c2996023840d98e1d85ad148d629 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 13:55:18 2006 +0200 |
| |
| Fix/workaround broken dependency handling with make 3.81 |
| Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200 |
| |
| commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Oct 23 22:17:05 2006 +0200 |
| |
| Fix sequoia separate object direcory building problems. |
| |
| commit 3dfa9cfdcee78b30da3432318b32821ffabe974b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 17:16:35 2006 -0500 |
| |
| Use generic I2C register block on 85xx and 86xx. |
| |
| Replace private IMMAP I2C structures with generic reg block |
| and allow 86xx to have multiple I2C device busses. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 15:54:34 2006 -0500 |
| |
| Fix compilation warnings on a few 85xx boards. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2047672684cf85cb6f96a1fbc993180aaaf19a99 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 15:50:15 2006 -0500 |
| |
| Converted all 85xx boards to use a common FSL I2C driver. |
| Introduced COFIG_FSL_I2C to select the common FSL I2C driver. |
| And removed hard i2c path from a few u-boot.lds scipts too. |
| Minor whitespace cleanups along the way. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d45f69e362b05892c9e92a7907e5820995612aa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 12:02:24 2006 -0500 |
| |
| Rewrite a series of goto statements as a sequences of |
| conditional expressions instead. |
| |
| Use consistent return code 0/-1 for good/bad indicators. |
| |
| Include one fewer file if the driver isn't used at all. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7237c033b02fe295880435f1eb80819a0c987532 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 11:02:16 2006 -0500 |
| |
| Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c |
| |
| in an effort to begin to unify the umpteen FSL I2C drivers that |
| are all otherwise very similar. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 11:33:52 2006 -0500 |
| |
| * Fix a bunch of compiler warnings for gcc 4.0 |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 17 06:14:31 2006 +0200 |
| |
| Add monitor functions for indirect access to PPC440 DCR's |
| Patch by Leonid Baryudin, 12 Oct 2006 |
| |
| commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 13 16:47:53 2006 -0500 |
| |
| Fixed leading whitespace issues. |
| Removed spurious LAWAR thing. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 12 10:42:36 2006 -0500 |
| |
| Remove unneeded include files and local variable. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Oct 10 00:23:32 2006 -0600 |
| |
| Fix possible uninitialized variable compiler warning. |
| |
| When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in |
| do_bootm_linux() may be uninitialized. There is no possibility in the |
| current code that len will get used uninitialized, but this fix follows |
| the existing convention of setting both len and data to zero at the same |
| time. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Oct 11 15:13:01 2006 -0500 |
| |
| * Fix a bunch of compiler warnings for gcc 4.0 |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit bf651baa365e5447246aad6a633ccd667cf24a39 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Oct 11 10:10:43 2006 -0500 |
| |
| Move "ar" flags to config.mk to allow for silent "make -s" |
| |
| commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:19:03 2006 -0500 |
| |
| Coding style changes to remove local varible blocks |
| and reformat a bit nicer. |
| |
| commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:16:04 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit 7b382b7125f2397cce63253df62f183e3dfa2770 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:14:45 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit e10390ddd736b0dad1528eec4b0fe35c0827139a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:06:53 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit 89875e96ba3f023157bf50d5f8e33bf254964a76 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:03:43 2006 -0500 |
| |
| Ran lindent and cleaned up whitespace issues. |
| Format for 80-columns too. |
| |
| commit 333961ae7095fc66d8a041fce1ac9ee873b09d86 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:02:22 2006 -0500 |
| |
| Fix whitespace and 80-col issues. |
| |
| commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:36:51 2006 +0200 |
| |
| CFG_NAND_QUIET_TEST added to not warn upon missing NAND device |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit 5bc528fa4da751d472397b308137238a6465afd2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:35:25 2006 +0200 |
| |
| Update ALPR code (NAND support working now) |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit 77d5034847d328753b80c46b83f960a14a26f40e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:33:03 2006 +0200 |
| |
| Remove compile warnings in fpga code |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit f3443867e90d2979a7dd1c65b0d537777e1f9850 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:30:52 2006 +0200 |
| |
| Add CONFIG_BOARD_RESET to configure board specific reset function |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit f55df18187e7a45cb73fec4370d12135e6691ae1 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Sep 29 08:23:12 2006 +0100 |
| |
| Fix missing tCycle/modfreq calculation. |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 8272dc2f58f2473d8995fcc9b916440cfba080f0 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:33:35 2006 -0500 |
| |
| Updated config headers to add default FDT-based booting |
| |
| commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:34:18 2006 -0500 |
| |
| Add support for eTSEC 3 & 4 on 8548 CDS |
| |
| * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS. |
| This will only work on rev 1.3 boards (but doesn't break older boards) |
| * Cleaned up some comments to reflect the expanded role of tsec |
| in other systems |
| |
| commit 084d648b109c8984f83674043c1a7fa3885ef801 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:33:56 2006 -0500 |
| |
| Added code to support 2.6.18 PCI changes in u-boot |
| |
| * Added code to swizzle the IRQ map for the PCI |
| |
| commit afbdc649f8751e4f4f1a6f527edfe139773f2c15 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Sep 19 09:34:10 2006 -0500 |
| |
| Modified makefile for new build mechanism. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d14ba6a798beb753e7a864500414fcc2d198b8bc |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Sep 14 08:40:36 2006 -0500 |
| |
| Handle 86xx SVR values according to the new Reference Manual. |
| Both 8641 and 8641D have SVR == 0x8090, and are distinguished |
| by the byte in bits 16-23 instead. |
| Thanks to Jason Jin for noticing. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Mon Aug 28 14:25:31 2006 +0800 |
| |
| Fixed an OF-tree off-by-one bug when adding a new property name. |
| This bug will cause the kernel booting to pause a long time. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit) |
| |
| commit 9bff7a69a885adebbd2bd45990494ec4cf998a30 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 11:05:09 2006 -0500 |
| |
| Remove trailing empty lines. |
| |
| commit cd6d73d5b895a5935ac4fde0a356288142a584e0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 09:48:49 2006 -0500 |
| |
| Remove bogus msync and use volatile asm. |
| |
| commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 08:17:14 2006 -0500 |
| |
| Add myself as maintainer for MPC8641HPCN. |
| |
| commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Mon Aug 28 14:25:31 2006 +0800 |
| |
| Fixed an OF-tree off-by-one bug when adding a new property name. |
| This bug will cause the kernel booting to pause a long time. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 5567806b67d0ae83493aa8823ad3b6c914f581d7 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Aug 25 14:38:34 2006 -0400 |
| |
| Change ramdiskaddr and dtbaddr |
| Remove PEX fluff commands. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 23 13:32:45 2006 -0500 |
| |
| * Another small fix for booting with disable_of |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 23 11:04:43 2006 -0500 |
| |
| Cleanup and lindent new AHCI driver. |
| |
| commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de |
| Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
| Date: Wed Aug 23 19:15:12 2006 +0800 |
| |
| Add AHCI define and sata support for MPC8641HPCN board. |
| |
| Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| |
| commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4 |
| Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
| Date: Wed Aug 23 19:10:44 2006 +0800 |
| |
| Add AHCI support to u-boot |
| |
| Add AHCI support in u-boot, enable the sata disk controllers which |
| following the AHCI protocol. |
| |
| Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| |
| commit d8ea2acf5f137cae99417df4f573d036ee384668 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Aug 23 17:54:32 2006 +0800 |
| |
| Add dtb boot-up parameter to default boot commands. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit b93775c2036b99baa390ea425c4771895bbc63c4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 18:26:08 2006 -0500 |
| |
| Cleanup even more poorly introduced whitespace. |
| |
| commit ae6241685cbcf0c79a3636530d2ceab1fb291a94 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 18:07:00 2006 -0500 |
| |
| Cleanup more poorly introduced whitespace. |
| |
| commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 17:54:05 2006 -0500 |
| |
| Cleanup poorly introduced whitespace. |
| |
| commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 12:25:27 2006 -0500 |
| |
| General indent and whitespace cleanups. |
| |
| commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 12:06:18 2006 -0500 |
| |
| General indent and whitespace cleanups. |
| |
| commit 41a0e8b304d3ff55fe27a230507aac79684016ac |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 10:42:21 2006 -0500 |
| |
| Cleanup compiler warnings. |
| |
| commit 5de62c47a8628b3da4d73f7c07027f32a3342d40 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Tue Aug 22 09:31:59 2006 -0500 |
| |
| Fix disable_of booting |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 87a449c8ac396420cb24260f717ea9e6faa82047 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Tue Aug 22 09:23:55 2006 -0500 |
| |
| Support for FDT in uImage format, error when using FDT from flash |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 75c299c38369d01addd5e054b8a16217b70f4a86 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:12:55 2006 -0400 |
| |
| Unlock cache before kernel starts up for MPC86xx |
| |
| commit 67256678f00c09b0a7f19e862e5c1847553d31bc |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:13:15 2006 -0400 |
| |
| Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| |
| commit 1c8f6d8fb028f156094d05f2d14298e6479364ac |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:12:55 2006 -0400 |
| |
| Unlock cache before kernel starts up for MPC86xx |
| |
| commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:13:15 2006 -0400 |
| |
| Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| |
| commit 86c8e17f25e972a7e272950a0735fad84e082b88 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 16 13:59:47 2006 -0500 |
| |
| * Fix disable_of booting |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 25c751e9adc86e22fe3b5b47cf2806379b575db7 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 16 10:54:09 2006 -0500 |
| |
| * Support for FDT in uImage format, error when using FDT from flash |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 15 14:22:35 2006 +0200 |
| |
| Add initial support for the ALPR board from Prodrive |
| NAND needs some additional testing |
| Patch by Heiko Schocher, 15 Aug 2006 |
| |
| commit f0ff4692ff3372dec55074a8eb444943ab095abb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 15 14:15:51 2006 +0200 |
| |
| Add FPGA Altera Cyclone 2 support |
| Patch by Heiko Schocher, 15 Aug 2006 |
| |
| commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 14 15:33:38 2006 -0500 |
| |
| Fix BAT0 to actually be cacheable, non-guarded as documented. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 40bc83559db5745681909fd7382ae509567e116d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 9 15:32:16 2006 -0500 |
| |
| Removed MPC8641HPCN DTS source file from build. |
| It is no longer linked into U-Boot; its sources are |
| now located in the kernel tree. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:47:03 2006 -0500 |
| |
| * Switched default PCI speed for 8540 ADS back to 33MHz |
| |
| * Added comments and a printf to warn that PCI-X won't |
| work at 33MHz |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:35 2006 -0500 |
| |
| * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:13 2006 -0500 |
| |
| * Added VIA configuration table |
| |
| * Added support for PCI2 on CDS |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit c88f9fe66b64247e5b6a38410ba315ca25596d16 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:41 2006 -0500 |
| |
| * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 97074ed9655309b64231bc2cee69fe85399f8055 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:17 2006 -0500 |
| |
| * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:49 2006 -0500 |
| |
| * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a4e11558b810ef2cddffdf7b9d86bc1130441960 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:23 2006 -0500 |
| |
| * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:36 2006 -0500 |
| |
| * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006 |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:00 2006 -0500 |
| |
| * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006 |
| |
| commit 5498d90312aad9f6bdbf047986027c35b03cd163 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:42:24 2006 -0500 |
| |
| * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006 |
| |
| commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:41:37 2006 -0500 |
| |
| * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006 |
| |
| commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a |
| Author: John Traill <john.traill@freescale.com> |
| Date: Wed Aug 9 14:33:50 2006 +0100 |
| |
| Add Rapidio support for the MPC8641HPCN |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 91a414c7d1fb0eac912592cd995b30c9f23045c9 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Tue Aug 8 11:32:43 2006 +0100 |
| |
| Fix caslat calculation |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 709d3073e74153278e7904a70819bbef7df50e1a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Aug 3 16:17:56 2006 -0500 |
| |
| Convert to mac-address in ethernet nodes. |
| |
| commit 71748af833ca1017edf1415be376366ff2937d17 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:35 2006 -0400 |
| |
| Correct the irq value of DUART2 |
| |
| commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:41 2006 -0400 |
| |
| Change the space size of PEX IO in README |
| |
| commit 239db37c94f7a92941c4465feceb867c609241c5 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:18 2006 -0400 |
| |
| Move get_board_sys_clk to board directory |
| |
| commit 492900b985439fbce1a118afde1e35def870db03 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Jul 28 09:03:54 2006 +0100 |
| |
| Fix 8641HPCN pollution |
| |
| commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Jul 28 08:16:06 2006 +0100 |
| |
| Fix 8641HPCN timebase |
| |
| commit c86360b830f1eecd7a72208575dde4f57879faea |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Fri Jul 28 00:01:34 2006 +0800 |
| |
| Fixed OF device tree of mpc86xxhpcn board. |
| |
| The changes works in with kernel irq mapping rework. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit bea3f28d285942bf3f7ab339ce85178ded544225 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Wed Jul 12 10:48:05 2006 -0400 |
| |
| Add support for reading and writing mac addresses to or from ID EEPROM. |
| |
| Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). |
| With attached patch, we can use command "mac/mac read/mac save/" |
| to read and write EEPROM under u-boot prompt. |
| |
| U-boot will calculate the checksum of EEPROM while bootup, |
| if it is right, then u-boot will check whether the mac address |
| of eTSEC0/1/2/3 is availalbe (non-zero). |
| |
| If there is mac address availabe in EEPROM, u-boot will use it, |
| otherewise, u-boot will use the mac address defined in |
| MPC8641HPCN.h. This matches the requirement to set unique mac address |
| for each TSEC port. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit fcb28e763415e0e4e66b0f45842d1557ae198e5e |
| Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
| Date: Thu Jul 13 10:35:10 2006 -0500 |
| |
| Fixed initrd issue by define big RAM |
| |
| Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| |
| commit e6cd2a1785d74ec3d30a86f1cb360be8de478151 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 7 10:01:45 2006 -0500 |
| |
| We made a u-boot patch to fix the hang up issue |
| when booting filesystem from ramdisk. |
| |
| Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| |
| commit 38433ccc5850ee70549af0b2bc5b920355ef5388 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:47:03 2006 -0500 |
| |
| * Switched default PCI speed for 8540 ADS back to 33MHz |
| * Added comments and a printf to warn that PCI-X won't |
| work at 33MHz |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:35 2006 -0500 |
| |
| * Fixed a bug where 8555 PCI code used the old variable and |
| function names |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:13 2006 -0500 |
| |
| * Added VIA configuration table |
| * Added support for PCI2 on CDS |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:41 2006 -0500 |
| |
| * Fixed PCI memory definitions |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 087454609e47295443af793a282cddcd91a5f49c |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:17 2006 -0500 |
| |
| * Added support for initializing second PCI bus on 85xx |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b636aaeb6fd516a442fb611bbeeddf3077a687fb |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:49 2006 -0500 |
| |
| * Added PCI-X #defines for PCI-X initialization |
| Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 20abbc6fffa115690107cc942c7abf84bdc03a1b |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:23 2006 -0500 |
| |
| * Made sure the code which disables prefetch for PCI devices |
| sets the size of the prefetch region to 0 |
| Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 40d5fa35d02df22580593bf0039ab173367e8ef0 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:36 2006 -0500 |
| |
| * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards |
| Patch by Jon Loeliger 17-Jan-2006 |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit be7e8b0cb5a0c49dc180075b96df296a893bf146 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:00 2006 -0500 |
| |
| * Removed the oftree.dts for stxxtx in light of the changes |
| to the flat device tree handling code |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit 1b380ec225665e73959677f3893dc658c5925e05 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:42:24 2006 -0500 |
| |
| * Patch to modify ft_build.c to update flat device trees in place |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit 98a9c4d468a942a09ebe8979bec508017f3e4462 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:41:37 2006 -0500 |
| |
| * Modify bootm command to support booting with flat device trees |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit da012ab661fd4ab169dd7b9b32201a4df62cf34a |
| Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
| Date: Wed Jun 28 08:43:56 2006 -0500 |
| |
| Change Id to symbolic name for RTL8139 |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:10 2006 +0800 |
| |
| Fix RTL8139 in big endian |
| |
| signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| signed-off-by: Wei Zhang <wei.zhang@freescale.com> |
| |
| commit fcfb9a57947fc203b99fe81ab0578f7286261f9f |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:23 2006 +0800 |
| |
| Fix Tsec bug when no link |
| |
| When tftp a non-exist file from the tftp server, u-boot will check |
| the link of all eth port. The original file will return wrong link |
| state on the no link ports. |
| |
| signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| |
| commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:02 2006 +0800 |
| |
| Fix bug for io_bar size during pci scan |
| |
| During the pci scan process, Some devices return bar_reponse with the |
| highest bytes 0, such as the pci bridge in uli1575 return bar_response |
| with 0xffffff, So the bar_size should be manually set under 64K. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| |
| commit fa7db9c377bc2353a17bf1d381d65a6c418728f0 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:11:54 2006 +0800 |
| |
| Enable PCIE1 for MPC8641HPCN board |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 99d70e3a47affb9bae041a2caece7cd516e213b3 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Jun 26 11:06:00 2006 +0200 |
| |
| More code cleanup |
| |
| commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jun 22 08:51:46 2006 -0500 |
| |
| Fix bug in 8641hpcn reset command with no args. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Tue Jun 20 17:47:15 2006 +0800 |
| |
| Reworked IRQ mapping in OF-tree. |
| |
| commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jun 15 21:33:37 2006 -0500 |
| |
| Do not enable address translation on secondary CPUs. |
| Do not set up BATs on secondary CPUs. Let Linux do the nasty. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 386eda022473394ad8f36b86f2bdc9b4cb816291 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jun 14 18:14:56 2006 +0200 |
| |
| Code cleanup |
| |
| commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jun 14 17:45:53 2006 +0200 |
| |
| Various USB related patches |
| - Add support for mpc8xx USB device. |
| - Add support for Common Device Class - Abstract Control Model USB console. |
| - Add support for flow control in USB slave devices. |
| - Add support for switching between gserial and cdc_acm using environment. |
| - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h |
| - Update usbcore slightly to ease host enumeration. |
| - Fix non-portable endian problems in usbdcore and usbdcore_ep0. |
| - Add AdderUSB_config as a defconfig to enable usage of the USB console |
| by default with the Adder87x U-Boot port. |
| Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006 |
| |
| commit 8ecc971618f56029ad99d3516f8b297a6ed58971 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 7 10:53:55 2006 -0500 |
| |
| Fix a get_board_sys_clk() use-before-def warning. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit d9bf4858fca5aa4d651b283270f77da72ebadfd5 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 7 10:52:49 2006 -0500 |
| |
| Allow DTC path to be passed in. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit c83ae9ea6d93abbe751bf8a3396236a084e56f87 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Jun 6 16:54:29 2006 -0400 |
| |
| Modify the IRQ of DUART2 |
| |
| commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 13:55:35 2006 -0500 |
| |
| Review cleanups. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb5965fb95b77a49f4e6af95248e0c849f4af03e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 12:44:44 2006 -0500 |
| |
| White space cleanup. |
| Some 80-column cleanups. |
| Convert printf() to puts() where possible. |
| Use #include "spd_sdram.h" as needed. |
| Enhanced reset command usage message a bit. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3d5c5be547445dd3bd2eb7368d80df03ea437970 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 11:39:34 2006 -0500 |
| |
| Removed unneeded local_bus_init() from 8641HPCN board. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d3d729c16c392d2982d3266b659d333c927697d |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 11:24:28 2006 -0500 |
| |
| Moved mpc8641hpcn_board_reset() out of cpu/ into board/. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b2a941de060350ad15878d8219825f4950e9bb8e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 10:07:28 2006 -0500 |
| |
| Remove dead debug code. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 126aa70f10ba3d20e0a6f4d32328250513b77770 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue May 30 17:47:00 2006 -0500 |
| |
| Move mpc86xx PIXIS code to board directory |
| |
| First cut at moving the PIXIS platform code out of |
| the 86xx cpu directory and into board/mpc8641hpcn |
| where it belongs. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 30 16:56:14 2006 +0200 |
| |
| Support generic OHCI support for the s3c24x0 cpu. |
| |
| commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue May 30 09:10:32 2006 -0500 |
| |
| Improve "reset" command's interaction with watchdog. |
| |
| "reset altbank" will reset another bank WITHOUT watch dog timer enabled |
| "reset altbank wd" will reset another bank WITH watch dog enabled |
| "diswd" will disable watch dog after u-boot boots up successfully |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue May 30 08:51:19 2006 -0500 |
| |
| Fix two SDRAM setup bugs. |
| |
| Fix ECC setup bug. |
| Enable 1T/2T based on number of DIMMs present. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit d11fec5015334deb2010e36ce00bb118cc5429a5 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:24:48 2006 -0500 |
| |
| Add first draft of the MPC8641HPCN doc/README. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit ed45d6c930b5939718a87ee12e25cf9a05978d4a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:13:04 2006 -0500 |
| |
| Added pci@8000 block. |
| Updated ethernet interrupt mappings (moved up 48). |
| Cleaned up a few comments. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:01:16 2006 -0500 |
| |
| Allow args on reset command. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 23 13:38:35 2006 +0200 |
| |
| Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some |
| fixes to the latter. |
| |
| commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 23 10:33:11 2006 +0200 |
| |
| More cleanup for the delta board and the generic usb_ohci driver. Added |
| CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific |
| initialization and cleanup hooks respectively. |
| |
| commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon May 22 16:33:54 2006 +0200 |
| |
| This patch adds USB storage support for the delta board. This is the first |
| board to make use of a generic OHCI driver, that calls hooks for board |
| dependant initialization. |
| |
| commit 14e37081ff3cac7ebe6e93836523429853b6b292 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:28:39 2006 -0500 |
| |
| Change arbitration to round-robin for SMP linux. |
| |
| commit 9a655876e5995be80f49054e2509500e871e4d3a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:26:34 2006 -0500 |
| |
| Enable dual DDR controllers and interleaving. |
| |
| commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:22:44 2006 -0500 |
| |
| Update 86xx address map and LAWBARs. |
| |
| commit cccce5d0581bb0ba4602799a4b5112e58d1579cb |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:14:15 2006 -0500 |
| |
| Remove L2 Cache invalidate polling. |
| |
| commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 12:33:09 2006 -0500 |
| |
| Enable 2nd CPU and I2C. |
| |
| commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon May 15 07:26:56 2006 -0500 |
| |
| Update interrupt mapping. |
| |
| commit 6cfea33477b04b63ed47386ed1629529484c33ba |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed May 10 09:38:06 2006 -0500 |
| |
| Remove unneeded INIT_RAM_LOCK cache twiddling. |
| Correctly tracks r29 as global data pointer now. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed May 10 09:33:07 2006 -0500 |
| |
| Remove unnecessary flash.c file. |
| |
| commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue May 9 08:23:49 2006 -0500 |
| |
| Get MPC8641HPCN flash images working. |
| |
| Enable the CFI driver. |
| Remove bogus LAWBAR7 cruft. |
| Use correct TEXT_BASE, Fixup load script. |
| Enable SPD EEPROM during DDR setup. |
| Use generic RFC 1918 IP addresses by default. |
| |
| commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Apr 27 10:15:16 2006 -0500 |
| |
| Cleanup whitespaces and style issues. |
| Removed //-style comments. |
| Use 80-column lines. |
| Remove trailing whitespace. |
| Remove dead code and debug cruft. |
| |
| commit a2320a6bf8113a09544c42d160d10ac69d049a03 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Apr 27 08:22:39 2006 -0500 |
| |
| Revert bad PCI prefetch limit change. |
| |
| commit debb7354d1ea4f694154818df5e5b523f5c1cc1d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 26 17:58:56 2006 -0500 |
| |
| Initial support for MPC8641 HPCN board. |