| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2017 |
| * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <clock_legacy.h> |
| #include <command.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <vsprintf.h> |
| #include <dm/lists.h> |
| #include <dt-bindings/clk/mpc83xx-clk.h> |
| #include <asm/arch/soc.h> |
| #include <linux/bitops.h> |
| |
| #include "mpc83xx_clk.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /** |
| * struct mpc83xx_clk_priv - Private data structure for the MPC83xx clock |
| * driver |
| * @speed: Array containing the speed values of all system clocks (initialized |
| * once, then only read back) |
| */ |
| struct mpc83xx_clk_priv { |
| u32 speed[MPC83XX_CLK_COUNT]; |
| }; |
| |
| /** |
| * is_clk_valid() - Check if clock ID is valid for given clock device |
| * @clk: The clock device for which to check a clock ID |
| * @id: The clock ID to check |
| * |
| * Return: true if clock ID is valid for clock device, false if not |
| */ |
| static inline bool is_clk_valid(struct udevice *clk, int id) |
| { |
| ulong type = dev_get_driver_data(clk); |
| |
| switch (id) { |
| case MPC83XX_CLK_MEM: |
| return true; |
| case MPC83XX_CLK_MEM_SEC: |
| return type == SOC_MPC8360; |
| case MPC83XX_CLK_ENC: |
| return (type == SOC_MPC8308) || (type == SOC_MPC8309); |
| case MPC83XX_CLK_I2C1: |
| return true; |
| case MPC83XX_CLK_TDM: |
| return type == SOC_MPC8315; |
| case MPC83XX_CLK_SDHC: |
| return mpc83xx_has_sdhc(type); |
| case MPC83XX_CLK_TSEC1: |
| case MPC83XX_CLK_TSEC2: |
| return mpc83xx_has_tsec(type); |
| case MPC83XX_CLK_USBDR: |
| return type == SOC_MPC8360; |
| case MPC83XX_CLK_USBMPH: |
| return type == SOC_MPC8349; |
| case MPC83XX_CLK_PCIEXP1: |
| return mpc83xx_has_pcie1(type); |
| case MPC83XX_CLK_PCIEXP2: |
| return mpc83xx_has_pcie2(type); |
| case MPC83XX_CLK_SATA: |
| return mpc83xx_has_sata(type); |
| case MPC83XX_CLK_DMAC: |
| return (type == SOC_MPC8308) || (type == SOC_MPC8309); |
| case MPC83XX_CLK_PCI: |
| /* |
| * FIXME: implement proper support for this. |
| */ |
| return 0 && mpc83xx_has_pci(type); |
| case MPC83XX_CLK_CSB: |
| return true; |
| case MPC83XX_CLK_I2C2: |
| return mpc83xx_has_second_i2c(type); |
| case MPC83XX_CLK_QE: |
| case MPC83XX_CLK_BRG: |
| return mpc83xx_has_quicc_engine(type) && (type != SOC_MPC8309); |
| case MPC83XX_CLK_LCLK: |
| case MPC83XX_CLK_LBIU: |
| case MPC83XX_CLK_CORE: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /** |
| * init_single_clk() - Initialize a clock with a given ID |
| * @dev: The clock device for which to initialize the clock |
| * @clk: The clock ID |
| * |
| * The clock speed is read from the hardware's registers, and stored in the |
| * private data structure of the driver. From there it is only retrieved, and |
| * not set. |
| * |
| * Return: 0 if OK, -ve on error |
| */ |
| static int init_single_clk(struct udevice *dev, int clk) |
| { |
| struct mpc83xx_clk_priv *priv = dev_get_priv(dev); |
| immap_t *im = (immap_t *)CONFIG_SYS_IMMR; |
| ulong type = dev_get_driver_data(dev); |
| struct clk_mode mode; |
| ulong mask; |
| u32 csb_clk = get_csb_clk(im); |
| int ret; |
| |
| ret = retrieve_mode(clk, type, &mode); |
| if (ret) { |
| debug("%s: Could not retrieve mode for clk %d (ret = %d)\n", |
| dev->name, clk, ret); |
| return ret; |
| } |
| |
| if (mode.type == TYPE_INVALID) { |
| debug("%s: clock %d invalid\n", dev->name, clk); |
| return -EINVAL; |
| } |
| |
| if (mode.type == TYPE_SCCR_STANDARD) { |
| mask = GENMASK(31 - mode.low, 31 - mode.high); |
| |
| switch (sccr_field(im, mask)) { |
| case 0: |
| priv->speed[clk] = 0; |
| break; |
| case 1: |
| priv->speed[clk] = csb_clk; |
| break; |
| case 2: |
| priv->speed[clk] = csb_clk / 2; |
| break; |
| case 3: |
| priv->speed[clk] = csb_clk / 3; |
| break; |
| default: |
| priv->speed[clk] = 0; |
| } |
| |
| return 0; |
| } |
| |
| if (mode.type == TYPE_SPMR_DIRECT_MULTIPLY) { |
| mask = GENMASK(31 - mode.low, 31 - mode.high); |
| |
| priv->speed[clk] = csb_clk * (1 + sccr_field(im, mask)); |
| return 0; |
| } |
| |
| if (clk == MPC83XX_CLK_CSB || clk == MPC83XX_CLK_I2C2) { |
| priv->speed[clk] = csb_clk; /* i2c-2 clk is equal to csb clk */ |
| return 0; |
| } |
| |
| if (clk == MPC83XX_CLK_QE || clk == MPC83XX_CLK_BRG) { |
| u32 pci_sync_in = get_pci_sync_in(im); |
| u32 qepmf = spmr_field(im, SPMR_CEPMF); |
| u32 qepdf = spmr_field(im, SPMR_CEPDF); |
| u32 qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); |
| |
| if (clk == MPC83XX_CLK_QE) |
| priv->speed[clk] = qe_clk; |
| else |
| priv->speed[clk] = qe_clk / 2; |
| |
| return 0; |
| } |
| |
| if (clk == MPC83XX_CLK_LCLK || clk == MPC83XX_CLK_LBIU) { |
| u32 lbiu_clk = csb_clk * |
| (1 + spmr_field(im, SPMR_LBIUCM)); |
| u32 clkdiv = lcrr_field(im, LCRR_CLKDIV); |
| |
| if (clk == MPC83XX_CLK_LBIU) |
| priv->speed[clk] = lbiu_clk; |
| |
| switch (clkdiv) { |
| case 2: |
| case 4: |
| case 8: |
| priv->speed[clk] = lbiu_clk / clkdiv; |
| break; |
| default: |
| /* unknown lcrr */ |
| priv->speed[clk] = 0; |
| } |
| |
| return 0; |
| } |
| |
| if (clk == MPC83XX_CLK_CORE) { |
| u8 corepll = spmr_field(im, SPMR_COREPLL); |
| u32 corecnf_tab_index = ((corepll & 0x1F) << 2) | |
| ((corepll & 0x60) >> 5); |
| |
| if (corecnf_tab_index > (ARRAY_SIZE(corecnf_tab))) { |
| debug("%s: Core configuration index %02x too high; possible wrong value", |
| dev->name, corecnf_tab_index); |
| return -EINVAL; |
| } |
| |
| switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) { |
| case RAT_BYP: |
| case RAT_1_TO_1: |
| priv->speed[clk] = csb_clk; |
| break; |
| case RAT_1_5_TO_1: |
| priv->speed[clk] = (3 * csb_clk) / 2; |
| break; |
| case RAT_2_TO_1: |
| priv->speed[clk] = 2 * csb_clk; |
| break; |
| case RAT_2_5_TO_1: |
| priv->speed[clk] = (5 * csb_clk) / 2; |
| break; |
| case RAT_3_TO_1: |
| priv->speed[clk] = 3 * csb_clk; |
| break; |
| default: |
| /* unknown core to csb ratio */ |
| priv->speed[clk] = 0; |
| } |
| |
| return 0; |
| } |
| |
| /* Unknown clk value -> error */ |
| debug("%s: clock %d invalid\n", dev->name, clk); |
| return -EINVAL; |
| } |
| |
| /** |
| * init_all_clks() - Initialize all clocks of a clock device |
| * @dev: The clock device whose clocks should be initialized |
| * |
| * Return: 0 if OK, -ve on error |
| */ |
| static inline int init_all_clks(struct udevice *dev) |
| { |
| int i; |
| |
| for (i = 0; i < MPC83XX_CLK_COUNT; i++) { |
| int ret; |
| |
| if (!is_clk_valid(dev, i)) |
| continue; |
| |
| ret = init_single_clk(dev, i); |
| if (ret) { |
| debug("%s: Failed to initialize %s clock\n", |
| dev->name, names[i]); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int mpc83xx_clk_request(struct clk *clock) |
| { |
| /* Reject requests of clocks that are not available */ |
| if (is_clk_valid(clock->dev, clock->id)) |
| return 0; |
| else |
| return -ENODEV; |
| } |
| |
| static ulong mpc83xx_clk_get_rate(struct clk *clk) |
| { |
| struct mpc83xx_clk_priv *priv = dev_get_priv(clk->dev); |
| |
| if (clk->id >= MPC83XX_CLK_COUNT) { |
| debug("%s: clock index %lu invalid\n", __func__, clk->id); |
| return 0; |
| } |
| |
| return priv->speed[clk->id]; |
| } |
| |
| static int mpc83xx_clk_enable(struct clk *clk) |
| { |
| /* MPC83xx clocks are always enabled */ |
| return 0; |
| } |
| |
| int get_clocks(void) |
| { |
| /* Empty implementation to keep the prototype in common.h happy */ |
| return 0; |
| } |
| |
| int get_serial_clock(void) |
| { |
| struct mpc83xx_clk_priv *priv; |
| struct udevice *clk; |
| int ret; |
| |
| ret = uclass_first_device_err(UCLASS_CLK, &clk); |
| if (ret) { |
| debug("%s: Could not get clock device\n", __func__); |
| return ret; |
| } |
| |
| priv = dev_get_priv(clk); |
| |
| return priv->speed[MPC83XX_CLK_CSB]; |
| } |
| |
| const struct clk_ops mpc83xx_clk_ops = { |
| .request = mpc83xx_clk_request, |
| .get_rate = mpc83xx_clk_get_rate, |
| .enable = mpc83xx_clk_enable, |
| }; |
| |
| static const struct udevice_id mpc83xx_clk_match[] = { |
| { .compatible = "fsl,mpc8308-clk", .data = SOC_MPC8308 }, |
| { .compatible = "fsl,mpc8309-clk", .data = SOC_MPC8309 }, |
| { .compatible = "fsl,mpc8313-clk", .data = SOC_MPC8313 }, |
| { .compatible = "fsl,mpc8315-clk", .data = SOC_MPC8315 }, |
| { .compatible = "fsl,mpc832x-clk", .data = SOC_MPC832X }, |
| { .compatible = "fsl,mpc8349-clk", .data = SOC_MPC8349 }, |
| { .compatible = "fsl,mpc8360-clk", .data = SOC_MPC8360 }, |
| { .compatible = "fsl,mpc8379-clk", .data = SOC_MPC8379 }, |
| { /* sentinel */ } |
| }; |
| |
| static int mpc83xx_clk_probe(struct udevice *dev) |
| { |
| struct mpc83xx_clk_priv *priv = dev_get_priv(dev); |
| ulong type; |
| int ret; |
| |
| ret = init_all_clks(dev); |
| if (ret) { |
| debug("%s: Could not initialize all clocks (ret = %d)\n", |
| dev->name, ret); |
| return ret; |
| } |
| |
| type = dev_get_driver_data(dev); |
| |
| if (mpc83xx_has_sdhc(type)) |
| gd->arch.sdhc_clk = priv->speed[MPC83XX_CLK_SDHC]; |
| |
| gd->arch.core_clk = priv->speed[MPC83XX_CLK_CORE]; |
| gd->arch.i2c1_clk = priv->speed[MPC83XX_CLK_I2C1]; |
| if (mpc83xx_has_second_i2c(type)) |
| gd->arch.i2c2_clk = priv->speed[MPC83XX_CLK_I2C2]; |
| |
| gd->mem_clk = priv->speed[MPC83XX_CLK_MEM]; |
| |
| if (mpc83xx_has_pci(type)) |
| gd->pci_clk = priv->speed[MPC83XX_CLK_PCI]; |
| |
| gd->cpu_clk = priv->speed[MPC83XX_CLK_CORE]; |
| gd->bus_clk = priv->speed[MPC83XX_CLK_CSB]; |
| |
| return 0; |
| } |
| |
| static int mpc83xx_clk_bind(struct udevice *dev) |
| { |
| int ret; |
| struct udevice *sys_child; |
| |
| /* |
| * Since there is no corresponding device tree entry, and since the |
| * clock driver has to be present in either case, bind the sysreset |
| * driver here. |
| */ |
| ret = device_bind_driver(dev, "mpc83xx_sysreset", "sysreset", |
| &sys_child); |
| if (ret) |
| debug("%s: No sysreset driver: ret=%d\n", |
| dev->name, ret); |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(mpc83xx_clk) = { |
| .name = "mpc83xx_clk", |
| .id = UCLASS_CLK, |
| .of_match = mpc83xx_clk_match, |
| .ops = &mpc83xx_clk_ops, |
| .probe = mpc83xx_clk_probe, |
| .priv_auto = sizeof(struct mpc83xx_clk_priv), |
| .bind = mpc83xx_clk_bind, |
| }; |
| |
| static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| int i; |
| char buf[32]; |
| struct udevice *clk; |
| int ret; |
| struct mpc83xx_clk_priv *priv; |
| |
| ret = uclass_first_device_err(UCLASS_CLK, &clk); |
| if (ret) { |
| debug("%s: Could not get clock device\n", __func__); |
| return ret; |
| } |
| |
| for (i = 0; i < MPC83XX_CLK_COUNT; i++) { |
| if (!is_clk_valid(clk, i)) |
| continue; |
| |
| priv = dev_get_priv(clk); |
| |
| printf("%s = %s MHz\n", names[i], strmhz(buf, priv->speed[i])); |
| } |
| |
| return 0; |
| } |
| |
| U_BOOT_CMD(clocks, 1, 1, do_clocks, |
| "display values of SoC's clocks", |
| "" |
| ); |