| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| */ |
| |
| /* |
| * This provide a test serial port. It provides an emulated serial port where |
| * a test program and read out the serial output and inject serial input for |
| * U-Boot. |
| */ |
| |
| #include <common.h> |
| #include <console.h> |
| #include <dm.h> |
| #include <lcd.h> |
| #include <os.h> |
| #include <serial.h> |
| #include <video.h> |
| #include <linux/compiler.h> |
| #include <asm/serial.h> |
| #include <asm/state.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /** |
| * output_ansi_colour() - Output an ANSI colour code |
| * |
| * @colour: Colour to output (0-7) |
| */ |
| static void output_ansi_colour(int colour) |
| { |
| char ansi_code[] = "\x1b[1;3Xm"; |
| |
| ansi_code[5] = '0' + colour; |
| os_write(1, ansi_code, sizeof(ansi_code) - 1); |
| } |
| |
| static void output_ansi_reset(void) |
| { |
| os_write(1, "\x1b[0m", 4); |
| } |
| |
| static int sandbox_serial_probe(struct udevice *dev) |
| { |
| struct sandbox_state *state = state_get_current(); |
| struct sandbox_serial_priv *priv = dev_get_priv(dev); |
| |
| if (state->term_raw != STATE_TERM_COOKED) |
| os_tty_raw(0, state->term_raw == STATE_TERM_RAW_WITH_SIGS); |
| priv->start_of_line = 0; |
| |
| if (state->term_raw != STATE_TERM_RAW) |
| disable_ctrlc(1); |
| membuff_init(&priv->buf, priv->serial_buf, sizeof(priv->serial_buf)); |
| |
| return 0; |
| } |
| |
| static int sandbox_serial_remove(struct udevice *dev) |
| { |
| struct sandbox_serial_plat *plat = dev_get_plat(dev); |
| |
| if (plat->colour != -1) |
| output_ansi_reset(); |
| |
| return 0; |
| } |
| |
| static int sandbox_serial_putc(struct udevice *dev, const char ch) |
| { |
| struct sandbox_serial_priv *priv = dev_get_priv(dev); |
| struct sandbox_serial_plat *plat = dev_get_plat(dev); |
| |
| /* With of-platdata we don't real the colour correctly, so disable it */ |
| if (!CONFIG_IS_ENABLED(OF_PLATDATA) && priv->start_of_line && |
| plat->colour != -1) { |
| priv->start_of_line = false; |
| output_ansi_colour(plat->colour); |
| } |
| |
| os_write(1, &ch, 1); |
| if (ch == '\n') |
| priv->start_of_line = true; |
| |
| return 0; |
| } |
| |
| static int sandbox_serial_pending(struct udevice *dev, bool input) |
| { |
| struct sandbox_serial_priv *priv = dev_get_priv(dev); |
| ssize_t count; |
| char *data; |
| int avail; |
| |
| if (!input) |
| return 0; |
| |
| os_usleep(100); |
| if (!IS_ENABLED(CONFIG_SPL_BUILD)) |
| video_sync_all(); |
| avail = membuff_putraw(&priv->buf, 100, false, &data); |
| if (!avail) |
| return 1; /* buffer full */ |
| |
| count = os_read(0, data, avail); |
| if (count > 0) |
| membuff_putraw(&priv->buf, count, true, &data); |
| |
| return membuff_avail(&priv->buf); |
| } |
| |
| static int sandbox_serial_getc(struct udevice *dev) |
| { |
| struct sandbox_serial_priv *priv = dev_get_priv(dev); |
| |
| if (!sandbox_serial_pending(dev, true)) |
| return -EAGAIN; /* buffer empty */ |
| |
| return membuff_getbyte(&priv->buf); |
| } |
| |
| #ifdef CONFIG_DEBUG_UART_SANDBOX |
| |
| #include <debug_uart.h> |
| |
| static inline void _debug_uart_init(void) |
| { |
| } |
| |
| static inline void _debug_uart_putc(int ch) |
| { |
| os_putc(ch); |
| } |
| |
| DEBUG_UART_FUNCS |
| |
| #endif /* CONFIG_DEBUG_UART_SANDBOX */ |
| |
| static int sandbox_serial_getconfig(struct udevice *dev, uint *serial_config) |
| { |
| uint config = SERIAL_DEFAULT_CONFIG; |
| |
| if (!serial_config) |
| return -EINVAL; |
| |
| *serial_config = config; |
| |
| return 0; |
| } |
| |
| static int sandbox_serial_setconfig(struct udevice *dev, uint serial_config) |
| { |
| u8 parity = SERIAL_GET_PARITY(serial_config); |
| u8 bits = SERIAL_GET_BITS(serial_config); |
| u8 stop = SERIAL_GET_STOP(serial_config); |
| |
| if (bits != SERIAL_8_BITS || stop != SERIAL_ONE_STOP || |
| parity != SERIAL_PAR_NONE) |
| return -ENOTSUPP; /* not supported in driver*/ |
| |
| return 0; |
| } |
| |
| static int sandbox_serial_getinfo(struct udevice *dev, |
| struct serial_device_info *serial_info) |
| { |
| struct serial_device_info info = { |
| .type = SERIAL_CHIP_UNKNOWN, |
| .addr_space = SERIAL_ADDRESS_SPACE_IO, |
| .addr = SERIAL_DEFAULT_ADDRESS, |
| .reg_width = 1, |
| .reg_offset = 0, |
| .reg_shift = 0, |
| .clock = SERIAL_DEFAULT_CLOCK, |
| }; |
| |
| if (!serial_info) |
| return -EINVAL; |
| |
| *serial_info = info; |
| |
| return 0; |
| } |
| |
| static const char * const ansi_colour[] = { |
| "black", "red", "green", "yellow", "blue", "megenta", "cyan", |
| "white", |
| }; |
| |
| static int sandbox_serial_of_to_plat(struct udevice *dev) |
| { |
| struct sandbox_serial_plat *plat = dev_get_plat(dev); |
| const char *colour; |
| int i; |
| |
| if (CONFIG_IS_ENABLED(OF_PLATDATA)) |
| return 0; |
| plat->colour = -1; |
| colour = dev_read_string(dev, "sandbox,text-colour"); |
| if (colour) { |
| for (i = 0; i < ARRAY_SIZE(ansi_colour); i++) { |
| if (!strcmp(colour, ansi_colour[i])) { |
| plat->colour = i; |
| break; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct dm_serial_ops sandbox_serial_ops = { |
| .putc = sandbox_serial_putc, |
| .pending = sandbox_serial_pending, |
| .getc = sandbox_serial_getc, |
| .getconfig = sandbox_serial_getconfig, |
| .setconfig = sandbox_serial_setconfig, |
| .getinfo = sandbox_serial_getinfo, |
| }; |
| |
| static const struct udevice_id sandbox_serial_ids[] = { |
| { .compatible = "sandbox,serial" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(sandbox_serial) = { |
| .name = "sandbox_serial", |
| .id = UCLASS_SERIAL, |
| .of_match = sandbox_serial_ids, |
| .of_to_plat = sandbox_serial_of_to_plat, |
| .plat_auto = sizeof(struct sandbox_serial_plat), |
| .priv_auto = sizeof(struct sandbox_serial_priv), |
| .probe = sandbox_serial_probe, |
| .remove = sandbox_serial_remove, |
| .ops = &sandbox_serial_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |
| |
| #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| static const struct sandbox_serial_plat platdata_non_fdt = { |
| .colour = -1, |
| }; |
| |
| U_BOOT_DRVINFO(serial_sandbox_non_fdt) = { |
| .name = "sandbox_serial", |
| .plat = &platdata_non_fdt, |
| }; |
| #endif |