| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2018 Cisco Systems, Inc. |
| * |
| * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org> |
| * |
| * Configuration settings for the Broadcom BCMSTB SoC family. |
| */ |
| |
| #ifndef __BCMSTB_H |
| #define __BCMSTB_H |
| |
| #include "version.h" |
| #include <linux/sizes.h> |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <linux/stringify.h> |
| #include <linux/types.h> |
| |
| struct bcmstb_boot_parameters { |
| u32 r0; |
| u32 r1; |
| u32 r2; |
| u32 r3; |
| u32 sp; |
| u32 lr; |
| }; |
| |
| extern struct bcmstb_boot_parameters bcmstb_boot_parameters; |
| |
| extern phys_addr_t prior_stage_fdt_address; |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| /* |
| * CPU configuration. |
| */ |
| #define CONFIG_SKIP_LOWLEVEL_INIT |
| |
| /* |
| * Memory configuration. |
| * |
| * The prior stage BOLT bootloader sets up memory for us. |
| * |
| * An example boot memory layout after loading everything is: |
| * |
| * 0x0000 8000 vmlinux.bin.gz |
| * : [~31 MiB uncompressed max] |
| * 0x01ef f000 FIT containing signed public key |
| * : [~2 KiB in size] |
| * 0x01f0 0000 DTB copied from prior-stage-provided region |
| * : [~1 MiB max] |
| * 0x0200 0000 FIT containing ramdisk and device tree |
| * : initramfs.cpio.gz |
| * : [~208 MiB uncompressed max, to CMA/bmem low address] |
| * : [~80 MiB compressed max, to PSB low address] |
| * : device tree binary |
| * : [~60 KiB] |
| * 0x0700 0000 Prior stage bootloader (PSB) |
| * : |
| * 0x0761 7000 Prior-stage-provided device tree binary (DTB) |
| * : [~40 KiB in size] |
| * 0x0f00 0000 Contiguous memory allocator (CMA/bmem) low address |
| * : |
| * 0x8010 0000 U-Boot code at ELF load address |
| * : [~500 KiB in size, stripped] |
| * 0xc000 0000 Top of RAM |
| * |
| * Setting gd->relocaddr to CONFIG_SYS_TEXT_BASE in dram_init_banksize |
| * prevents U-Boot from relocating itself when it is run as an ELF |
| * program by the prior stage bootloader. |
| * |
| * We want to keep the ramdisk and FDT in the FIT image in-place, to |
| * accommodate stblinux's bmem and CMA regions. To accomplish this, |
| * we set initrd_high and fdt_high to 0xffffffff, and the load and |
| * entry addresses of the FIT ramdisk entry to 0x0. |
| * |
| * Overwriting the prior stage bootloader causes memory instability, |
| * so the compressed initramfs needs to fit between the load address |
| * and the PSB low address. In BOLT's default configuration this |
| * limits the compressed size of the initramfs to approximately 80 |
| * MiB. However, BOLT can be configured to allow loading larger |
| * initramfs images, in which case this limitation is eliminated. |
| */ |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x100000 |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
| CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_LOAD_ADDR 0x2000000 |
| |
| /* |
| * CONFIG_SYS_LOAD_ADDR - 1 MiB. |
| */ |
| #define CONFIG_SYS_FDT_SAVE_ADDRESS 0x1f00000 |
| #define CONFIG_SYS_CBSIZE 512 |
| #define CONFIG_SYS_MAXARGS 32 |
| |
| /* |
| * Large kernel image bootm configuration. |
| */ |
| #define CONFIG_SYS_BOOTM_LEN SZ_64M |
| |
| /* |
| * NS16550 configuration. |
| */ |
| #define V_NS16550_CLK 81000000 |
| |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK |
| |
| /* |
| * Serial console configuration. |
| */ |
| #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ |
| 115200} |
| |
| /* |
| * Informational display configuration. |
| */ |
| #define CONFIG_REVISION_TAG |
| |
| /* |
| * Command configuration. |
| */ |
| |
| /* |
| * Flash configuration. |
| */ |
| #define CONFIG_ST_SMI |
| #define CONFIG_SPI_FLASH_STMICRO |
| #define CONFIG_SPI_FLASH_MACRONIX |
| |
| /* |
| * Filesystem configuration. |
| */ |
| #define CONFIG_DOS_PARTITION |
| |
| /* |
| * Environment configuration. |
| */ |
| |
| /* |
| * Save the prior stage provided DTB. |
| */ |
| /* |
| * Enable in-place RFS with this initrd_high setting. |
| */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "fdtsaveaddr=" __stringify(CONFIG_SYS_FDT_SAVE_ADDRESS) "\0" \ |
| "initrd_high=0xffffffff\0" \ |
| "fdt_high=0xffffffff\0" |
| |
| /* |
| * Set fdtaddr to prior stage-provided DTB in board_late_init, when |
| * writeable environment is available. |
| */ |
| |
| #endif /* __BCMSTB_H */ |