| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2020 NXP |
| */ |
| |
| #ifndef __LX2162_QDS_H |
| #define __LX2162_QDS_H |
| |
| #include "lx2160a_common.h" |
| |
| /* USB */ |
| #undef CONFIG_USB_MAX_CONTROLLER_COUNT |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 |
| |
| /* Voltage monitor on channel 2*/ |
| #define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv" |
| #define CONFIG_VID |
| #define CONFIG_VOL_MONITOR_LTC3882_SET |
| #define CONFIG_VOL_MONITOR_LTC3882_READ |
| |
| /* RTC */ |
| #define CONFIG_SYS_RTC_BUS_NUM 0 |
| |
| /* |
| * MMC |
| */ |
| #ifdef CONFIG_MMC |
| #ifndef __ASSEMBLY__ |
| u8 qixis_esdhc_detect_quirk(void); |
| #endif |
| #define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk() |
| #endif |
| |
| /* MAC/PHY configuration */ |
| #if defined(CONFIG_FSL_MC_ENET) |
| #define CONFIG_MII |
| #define CONFIG_ETHPRIME "DPMAC17@rgmii-id" |
| #endif |
| |
| /* EEPROM */ |
| #define CONFIG_ID_EEPROM |
| #define CONFIG_SYS_I2C_EEPROM_NXID |
| #define CONFIG_SYS_EEPROM_BUS_NUM 0 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 |
| |
| /* Initial environment variables */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| EXTRA_ENV_SETTINGS \ |
| "boot_scripts=lx2162aqds_boot.scr\0" \ |
| "boot_script_hdr=hdr_lx2162aqds_bs.out\0" \ |
| "BOARD=lx2162aqds\0" \ |
| "xspi_bootcmd=echo Trying load from flexspi..;" \ |
| "sf probe 0:0 && sf read $load_addr " \ |
| "$kernel_start $kernel_size ; env exists secureboot &&" \ |
| "sf read $kernelheader_addr_r $kernelheader_start " \ |
| "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ |
| " bootm $load_addr#$BOARD\0" \ |
| "sd_bootcmd=echo Trying load from sd card..;" \ |
| "mmc dev 0; mmcinfo; mmc read $load_addr " \ |
| "$kernel_addr_sd $kernel_size_sd ;" \ |
| "env exists secureboot && mmc read $kernelheader_addr_r "\ |
| "$kernelhdr_addr_sd $kernelhdr_size_sd " \ |
| " && esbc_validate ${kernelheader_addr_r};" \ |
| "bootm $load_addr#$BOARD\0" \ |
| "emmc_bootcmd=echo Trying load from emmc card..;" \ |
| "mmc dev 1; mmcinfo; mmc read $load_addr " \ |
| "$kernel_addr_sd $kernel_size_sd ;" \ |
| "env exists secureboot && mmc read $kernelheader_addr_r "\ |
| "$kernelhdr_addr_sd $kernelhdr_size_sd " \ |
| " && esbc_validate ${kernelheader_addr_r};" \ |
| "bootm $load_addr#$BOARD\0" |
| |
| #include <asm/fsl_secure_boot.h> |
| |
| #endif /* __LX2162_QDS_H */ |