| /* |
| * U-boot - flash.c Flash driver for PSD4256GV |
| * |
| * Copyright (c) 2005-2007 Analog Devices Inc. |
| * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. |
| * |
| * (C) Copyright 2000-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| #include <asm/io.h> |
| #include "flash-defines.h" |
| |
| int AFP_NumSectors = 40; |
| long AFP_SectorSize1 = 0x10000; |
| int AFP_SectorSize2 = 0x4000; |
| |
| void flash_reset(void) |
| { |
| reset_flash(); |
| } |
| |
| unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, int bank_flag) |
| { |
| int id = 0, i = 0; |
| static int FlagDev = 1; |
| |
| id = get_codes(); |
| if (FlagDev) { |
| #ifdef DEBUG |
| printf("Device ID of the Flash is %x\n", id); |
| #endif |
| FlagDev = 0; |
| } |
| info->flash_id = id; |
| |
| switch (bank_flag) { |
| case 0: |
| for (i = PriFlashABegin; i < SecFlashABegin; i++) |
| info->start[i] = (baseaddr + (i * AFP_SectorSize1)); |
| info->size = 0x200000; |
| info->sector_count = 32; |
| break; |
| case 1: |
| info->start[0] = baseaddr + SecFlashASec1Off; |
| info->start[1] = baseaddr + SecFlashASec2Off; |
| info->start[2] = baseaddr + SecFlashASec3Off; |
| info->start[3] = baseaddr + SecFlashASec4Off; |
| info->size = 0x10000; |
| info->sector_count = 4; |
| break; |
| case 2: |
| info->start[0] = baseaddr + SecFlashBSec1Off; |
| info->start[1] = baseaddr + SecFlashBSec2Off; |
| info->start[2] = baseaddr + SecFlashBSec3Off; |
| info->start[3] = baseaddr + SecFlashBSec4Off; |
| info->size = 0x10000; |
| info->sector_count = 4; |
| break; |
| } |
| return (info->size); |
| } |
| |
| unsigned long flash_init(void) |
| { |
| unsigned long size_b0, size_b1, size_b2; |
| int i; |
| |
| size_b0 = size_b1 = size_b2 = 0; |
| #ifdef DEBUG |
| printf("Flash Memory Start 0x%x\n", CONFIG_SYS_FLASH_BASE); |
| printf("Memory Map for the Flash\n"); |
| printf("0x20000000 - 0x200FFFFF Flash A Primary (1MB)\n"); |
| printf("0x20100000 - 0x201FFFFF Flash B Primary (1MB)\n"); |
| printf("0x20200000 - 0x2020FFFF Flash A Secondary (64KB)\n"); |
| printf("0x20280000 - 0x2028FFFF Flash B Secondary (64KB)\n"); |
| printf("Please type command flinfo for information on Sectors \n"); |
| #endif |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| } |
| |
| size_b0 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[0], 0); |
| size_b1 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[1], 1); |
| size_b2 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[2], 2); |
| |
| if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { |
| printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", |
| size_b0, size_b0 >> 20); |
| } |
| |
| (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH0_BASE, |
| (flash_info[0].start[2] - 1), &flash_info[0]); |
| |
| return (size_b0 + size_b1 + size_b2); |
| } |
| |
| void flash_print_info(flash_info_t * info) |
| { |
| int i; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id) { |
| case FLASH_PSD4256GV: |
| printf("ST Microelectronics "); |
| break; |
| default: |
| printf("Unknown Vendor: (0x%08X) ", info->flash_id); |
| break; |
| } |
| for (i = 0; i < info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf("\n "); |
| printf(" %08lX%s", |
| info->start[i], info->protect[i] ? " (RO)" : " "); |
| } |
| printf("\n"); |
| return; |
| } |
| |
| int flash_erase(flash_info_t * info, int s_first, int s_last) |
| { |
| int cnt = 0, i; |
| int prot, sect; |
| |
| prot = 0; |
| for (sect = s_first; sect <= s_last; ++sect) { |
| if (info->protect[sect]) |
| prot++; |
| } |
| |
| if (prot) |
| printf("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| else |
| printf("\n"); |
| |
| cnt = s_last - s_first + 1; |
| |
| if (cnt == FLASH_TOT_SECT) { |
| printf("Erasing flash, Please Wait \n"); |
| if (erase_flash() < 0) { |
| printf("Erasing flash failed \n"); |
| return FLASH_FAIL; |
| } |
| } else { |
| printf("Erasing Flash locations, Please Wait\n"); |
| for (i = s_first; i <= s_last; i++) { |
| if (info->protect[i] == 0) { /* not protected */ |
| if (erase_block_flash(i, info->start[i]) < 0) { |
| printf("Error Sector erasing \n"); |
| return FLASH_FAIL; |
| } |
| } |
| } |
| } |
| return FLASH_SUCCESS; |
| } |
| |
| int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) |
| { |
| int ret; |
| int d; |
| if (addr % 2) { |
| read_flash(addr - 1 - CONFIG_SYS_FLASH_BASE, &d); |
| d = (int)((d & 0x00FF) | (*src++ << 8)); |
| ret = write_data(addr - 1, 2, (uchar *) & d); |
| if (ret == FLASH_FAIL) |
| return ERR_NOT_ERASED; |
| ret = write_data(addr + 1, cnt - 1, src); |
| } else |
| ret = write_data(addr, cnt, src); |
| if (ret == FLASH_FAIL) |
| return ERR_NOT_ERASED; |
| return FLASH_SUCCESS; |
| } |
| |
| int write_data(long lStart, long lCount, uchar * pnData) |
| { |
| long i = 0; |
| unsigned long ulOffset = lStart - CONFIG_SYS_FLASH_BASE; |
| int d; |
| int nSector = 0; |
| int flag = 0; |
| |
| if (lCount % 2) { |
| flag = 1; |
| lCount = lCount - 1; |
| } |
| |
| for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) { |
| get_sector_number(ulOffset, &nSector); |
| read_flash(ulOffset, &d); |
| if (d != 0xffff) { |
| printf |
| ("Flash not erased at offset 0x%x Please erase to reprogram \n", |
| ulOffset); |
| return FLASH_FAIL; |
| } |
| unlock_flash(ulOffset); |
| d = (int)(pnData[i] | pnData[i + 1] << 8); |
| write_flash(ulOffset, d); |
| if (poll_toggle_bit(ulOffset) < 0) { |
| printf("Error programming the flash \n"); |
| return FLASH_FAIL; |
| } |
| if ((i > 0) && (!(i % AFP_SectorSize2))) |
| printf("."); |
| } |
| if (flag) { |
| get_sector_number(ulOffset, &nSector); |
| read_flash(ulOffset, &d); |
| if (d != 0xffff) { |
| printf |
| ("Flash not erased at offset 0x%x Please erase to reprogram \n", |
| ulOffset); |
| return FLASH_FAIL; |
| } |
| unlock_flash(ulOffset); |
| d = (int)(pnData[i] | (d & 0xFF00)); |
| write_flash(ulOffset, d); |
| if (poll_toggle_bit(ulOffset) < 0) { |
| printf("Error programming the flash \n"); |
| return FLASH_FAIL; |
| } |
| } |
| return FLASH_SUCCESS; |
| } |
| |
| int read_data(long ulStart, long lCount, long lStride, int *pnData) |
| { |
| long i = 0; |
| int j = 0; |
| long ulOffset = ulStart; |
| int iShift = 0; |
| int iNumWords = 2; |
| int nLeftover = lCount % 4; |
| int nHi, nLow; |
| int nSector = 0; |
| |
| for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) { |
| for (iShift = 0, j = 0; j < iNumWords; j += 2) { |
| if ((ulOffset >= INVALIDLOCNSTART) |
| && (ulOffset < INVALIDLOCNEND)) |
| return FLASH_FAIL; |
| |
| get_sector_number(ulOffset, &nSector); |
| read_flash(ulOffset, &nLow); |
| ulOffset += (lStride * 2); |
| read_flash(ulOffset, &nHi); |
| ulOffset += (lStride * 2); |
| pnData[i] = (nHi << 16) | nLow; |
| } |
| } |
| if (nLeftover > 0) { |
| if ((ulOffset >= INVALIDLOCNSTART) |
| && (ulOffset < INVALIDLOCNEND)) |
| return FLASH_FAIL; |
| |
| get_sector_number(ulOffset, &nSector); |
| read_flash(ulOffset, &pnData[i]); |
| } |
| return FLASH_SUCCESS; |
| } |
| |
| int write_flash(long nOffset, int nValue) |
| { |
| long addr; |
| |
| addr = (CONFIG_SYS_FLASH_BASE + nOffset); |
| SSYNC(); |
| *(unsigned volatile short *)addr = nValue; |
| SSYNC(); |
| if (poll_toggle_bit(nOffset) < 0) |
| return FLASH_FAIL; |
| return FLASH_SUCCESS; |
| } |
| |
| int read_flash(long nOffset, int *pnValue) |
| { |
| int nValue = 0x0; |
| long addr = (CONFIG_SYS_FLASH_BASE + nOffset); |
| |
| if (nOffset != 0x2) |
| reset_flash(); |
| SSYNC(); |
| nValue = *(volatile unsigned short *)addr; |
| SSYNC(); |
| *pnValue = nValue; |
| return TRUE; |
| } |
| |
| int poll_toggle_bit(long lOffset) |
| { |
| unsigned int u1, u2; |
| unsigned long timeout = 0xFFFFFFFF; |
| volatile unsigned long *FB = |
| (volatile unsigned long *)(0x20000000 + lOffset); |
| while (1) { |
| if (timeout < 0) |
| break; |
| u1 = *(volatile unsigned short *)FB; |
| u2 = *(volatile unsigned short *)FB; |
| if ((u1 & 0x0040) == (u2 & 0x0040)) |
| return FLASH_SUCCESS; |
| if ((u2 & 0x0020) == 0x0000) |
| continue; |
| u1 = *(volatile unsigned short *)FB; |
| if ((u2 & 0x0040) == (u1 & 0x0040)) |
| return FLASH_SUCCESS; |
| else { |
| reset_flash(); |
| return FLASH_FAIL; |
| } |
| timeout--; |
| } |
| printf("Time out occured \n"); |
| if (timeout < 0) |
| return FLASH_FAIL; |
| } |
| |
| void reset_flash(void) |
| { |
| write_flash(WRITESEQ1, RESET_VAL); |
| /* Wait for 10 micro seconds */ |
| udelay(10); |
| } |
| |
| int erase_flash(void) |
| { |
| write_flash(WRITESEQ1, WRITEDATA1); |
| write_flash(WRITESEQ2, WRITEDATA2); |
| write_flash(WRITESEQ3, WRITEDATA3); |
| write_flash(WRITESEQ4, WRITEDATA4); |
| write_flash(WRITESEQ5, WRITEDATA5); |
| write_flash(WRITESEQ6, WRITEDATA6); |
| |
| if (poll_toggle_bit(0x0000) < 0) |
| return FLASH_FAIL; |
| |
| write_flash(SecFlashAOff + WRITESEQ1, WRITEDATA1); |
| write_flash(SecFlashAOff + WRITESEQ2, WRITEDATA2); |
| write_flash(SecFlashAOff + WRITESEQ3, WRITEDATA3); |
| write_flash(SecFlashAOff + WRITESEQ4, WRITEDATA4); |
| write_flash(SecFlashAOff + WRITESEQ5, WRITEDATA5); |
| write_flash(SecFlashAOff + WRITESEQ6, WRITEDATA6); |
| |
| if (poll_toggle_bit(SecFlashASec1Off) < 0) |
| return FLASH_FAIL; |
| |
| write_flash(PriFlashBOff + WRITESEQ1, WRITEDATA1); |
| write_flash(PriFlashBOff + WRITESEQ2, WRITEDATA2); |
| write_flash(PriFlashBOff + WRITESEQ3, WRITEDATA3); |
| write_flash(PriFlashBOff + WRITESEQ4, WRITEDATA4); |
| write_flash(PriFlashBOff + WRITESEQ5, WRITEDATA5); |
| write_flash(PriFlashBOff + WRITESEQ6, WRITEDATA6); |
| |
| if (poll_toggle_bit(PriFlashBOff) < 0) |
| return FLASH_FAIL; |
| |
| write_flash(SecFlashBOff + WRITESEQ1, WRITEDATA1); |
| write_flash(SecFlashBOff + WRITESEQ2, WRITEDATA2); |
| write_flash(SecFlashBOff + WRITESEQ3, WRITEDATA3); |
| write_flash(SecFlashBOff + WRITESEQ4, WRITEDATA4); |
| write_flash(SecFlashBOff + WRITESEQ5, WRITEDATA5); |
| write_flash(SecFlashBOff + WRITESEQ6, WRITEDATA6); |
| |
| if (poll_toggle_bit(SecFlashBOff) < 0) |
| return FLASH_FAIL; |
| |
| return FLASH_SUCCESS; |
| } |
| |
| int erase_block_flash(int nBlock, unsigned long address) |
| { |
| long ulSectorOff = 0x0; |
| |
| if ((nBlock < 0) || (nBlock > AFP_NumSectors)) |
| return FALSE; |
| |
| ulSectorOff = (address - CONFIG_SYS_FLASH_BASE); |
| |
| write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1); |
| write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2); |
| write_flash((WRITESEQ3 | ulSectorOff), WRITEDATA3); |
| write_flash((WRITESEQ4 | ulSectorOff), WRITEDATA4); |
| write_flash((WRITESEQ5 | ulSectorOff), WRITEDATA5); |
| |
| write_flash(ulSectorOff, BlockEraseVal); |
| |
| if (poll_toggle_bit(ulSectorOff) < 0) |
| return FLASH_FAIL; |
| |
| return FLASH_SUCCESS; |
| } |
| |
| void unlock_flash(long ulOffset) |
| { |
| unsigned long ulOffsetAddr = ulOffset; |
| ulOffsetAddr &= 0xFFFF0000; |
| |
| write_flash((WRITESEQ1 | ulOffsetAddr), UNLOCKDATA1); |
| write_flash((WRITESEQ2 | ulOffsetAddr), UNLOCKDATA2); |
| write_flash((WRITESEQ3 | ulOffsetAddr), UNLOCKDATA3); |
| } |
| |
| int get_codes() |
| { |
| int dev_id = 0; |
| |
| write_flash(WRITESEQ1, GETCODEDATA1); |
| write_flash(WRITESEQ2, GETCODEDATA2); |
| write_flash(WRITESEQ3, GETCODEDATA3); |
| |
| read_flash(0x0002, &dev_id); |
| dev_id &= 0x00FF; |
| |
| reset_flash(); |
| |
| return dev_id; |
| } |
| |
| void get_sector_number(long ulOffset, int *pnSector) |
| { |
| int nSector = 0; |
| |
| if (ulOffset >= SecFlashAOff) { |
| if ((ulOffset < SecFlashASec1Off) |
| && (ulOffset < SecFlashASec2Off)) { |
| nSector = SECT32; |
| } else if ((ulOffset >= SecFlashASec2Off) |
| && (ulOffset < SecFlashASec3Off)) { |
| nSector = SECT33; |
| } else if ((ulOffset >= SecFlashASec3Off) |
| && (ulOffset < SecFlashASec4Off)) { |
| nSector = SECT34; |
| } else if ((ulOffset >= SecFlashASec4Off) |
| && (ulOffset < SecFlashAEndOff)) { |
| nSector = SECT35; |
| } |
| } else if (ulOffset >= SecFlashBOff) { |
| if ((ulOffset < SecFlashBSec1Off) |
| && (ulOffset < SecFlashBSec2Off)) { |
| nSector = SECT36; |
| } |
| if ((ulOffset < SecFlashBSec2Off) |
| && (ulOffset < SecFlashBSec3Off)) { |
| nSector = SECT37; |
| } |
| if ((ulOffset < SecFlashBSec3Off) |
| && (ulOffset < SecFlashBSec4Off)) { |
| nSector = SECT38; |
| } |
| if ((ulOffset < SecFlashBSec4Off) |
| && (ulOffset < SecFlashBEndOff)) { |
| nSector = SECT39; |
| } |
| } else if ((ulOffset >= PriFlashAOff) && (ulOffset < SecFlashAOff)) { |
| nSector = ulOffset & 0xffff0000; |
| nSector = ulOffset >> 16; |
| nSector = nSector & 0x000ff; |
| } |
| |
| if ((nSector >= 0) && (nSector < AFP_NumSectors)) { |
| *pnSector = nSector; |
| } |
| } |