drivers/usb/host/ehci-mx5.c - platform/external/u-boot - Gitiles

 /*
  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
  * Copyright (C) 2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
  * option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  * for more details.
  */

 #include <common.h>
 #include <usb.h>
 #include <errno.h>
 #include <linux/compiler.h>
 #include <usb/ehci-fsl.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/iomux.h>

 #include "ehci.h"

 #define MX5_USBOTHER_REGS_OFFSET 0x800


 #define MXC_OTG_OFFSET			0
 #define MXC_H1_OFFSET			0x200
 #define MXC_H2_OFFSET			0x400

 #define MXC_USBCTRL_OFFSET		0
 #define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
 #define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
 #define MXC_USB_CTRL_1_OFFSET		0x10
 #define MXC_USBH2CTRL_OFFSET		0x14

 /* USB_CTRL */
 /* OTG wakeup intr enable */
 #define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)
 /* OTG power mask */
 #define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)
 /* Host1 ULPI interrupt enable */
 #define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)
 /* HOST1 wakeup intr enable */
 #define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)
 /* HOST1 power mask */
 #define MXC_H1_UCTRL_H1PM_BIT		(1 << 8)

 /* USB_PHY_CTRL_FUNC */
 /* OTG Disable Overcurrent Event */
 #define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)
 /* UH1 Disable Overcurrent Event */
 #define MXC_H1_OC_DIS_BIT		(1 << 5)

 /* USBH2CTRL */
 #define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
 #define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
 #define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)

 /* USB_CTRL_1 */
 #define MXC_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)

 /* USB pin configuration */
 #define USB_PAD_CONFIG	(PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
 			PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \
 			PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL)

 #ifdef CONFIG_MX51
 /*
  * Configure the MX51 USB H1 IOMUX
  */
 void setup_iomux_usb_h1(void)
 {
 	mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_CLK, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_CLK, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_DIR, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DIR, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_NXT, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_NXT, USB_PAD_CONFIG);

 	mxc_request_iomux(MX51_PIN_USBH1_DATA0, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA0, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_DATA1, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA1, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_DATA2, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA2, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_DATA3, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA3, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_DATA4, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA4, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_DATA5, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA5, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_DATA6, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA6, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_USBH1_DATA7, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA7, USB_PAD_CONFIG);
 }

 /*
  * Configure the MX51 USB H2 IOMUX
  */
 void setup_iomux_usb_h2(void)
 {
 	mxc_request_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_A24, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_A25, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_A26, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_A27, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_A27, USB_PAD_CONFIG);

 	mxc_request_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D16, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D17, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D18, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D19, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D20, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D21, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_D22, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D22, USB_PAD_CONFIG);
 	mxc_request_iomux(MX51_PIN_EIM_D23, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D23, USB_PAD_CONFIG);
 }
 #endif

 int mxc_set_usbcontrol(int port, unsigned int flags)
 {
 	unsigned int v;
 	void __iomem *usb_base = (void __iomem *)OTG_BASE_ADDR;
 	void __iomem *usbother_base;
 	int ret = 0;

 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;

 	switch (port) {
 	case 0:	/* OTG port */
 		if (flags & MXC_EHCI_INTERNAL_PHY) {
 			v = __raw_readl(usbother_base +
 					MXC_USB_PHY_CTR_FUNC_OFFSET);
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 				/* OC/USBPWR is used */
 				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
 			else
 				/* OC/USBPWR is not used */
 				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
 			__raw_writel(v, usbother_base +
 					MXC_USB_PHY_CTR_FUNC_OFFSET);

 			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
 #ifdef CONFIG_MX51
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 				v &= ~MXC_OTG_UCTRL_OPM_BIT;
 			else
 				v |= MXC_OTG_UCTRL_OPM_BIT;
 #endif
 			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 		}
 		break;
 	case 1:	/* Host 1 ULPI */
 #ifdef CONFIG_MX51
 		/* The clock for the USBH1 ULPI port will come externally
 		   from the PHY. */
 		v = __raw_readl(usbother_base + MXC_USB_CTRL_1_OFFSET);
 		__raw_writel(v | MXC_USB_CTRL_UH1_EXT_CLK_EN, usbother_base +
 				MXC_USB_CTRL_1_OFFSET);
 #endif

 		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
 #ifdef CONFIG_MX51
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */
 		else
 			v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */
 #endif
 		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);

 		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
 		else
 			v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
 		__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);

 		break;
 	case 2: /* Host 2 ULPI */
 		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
 #ifdef CONFIG_MX51
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */
 		else
 			v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */
 #endif
 		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
 		break;
 	}

 	return ret;
 }

 void __board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
 {
 }

 void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
 	__attribute((weak, alias("__board_ehci_hcd_postinit")));

 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
 	struct usb_ehci *ehci;
 #ifdef CONFIG_MX53
 	struct clkctl *sc_regs = (struct clkctl *)CCM_BASE_ADDR;
 	u32 reg;

 	reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26);
 	/* derive USB PHY clock multiplexer from PLL3 */
 	reg |= 1 << 26;
 	__raw_writel(reg, &sc_regs->cscmr1);
 #endif

 	set_usboh3_clk();
 	enable_usboh3_clk(1);
 	set_usb_phy_clk();
 	enable_usb_phy1_clk(1);
 	enable_usb_phy2_clk(1);
 	mdelay(1);

 	/* Do board specific initialization */
 	board_ehci_hcd_init(CONFIG_MXC_USB_PORT);

 	ehci = (struct usb_ehci *)(OTG_BASE_ADDR +
 		(0x200 * CONFIG_MXC_USB_PORT));
 	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
 	*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
 			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
 	setbits_le32(&ehci->usbmode, CM_HOST);

 	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
 	setbits_le32(&ehci->portsc, USB_EN);

 	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
 	mdelay(10);

 	/* Do board specific post-initialization */
 	board_ehci_hcd_postinit(ehci, CONFIG_MXC_USB_PORT);

 	return 0;
 }

 int ehci_hcd_stop(int index)
 {
 	return 0;
 }
	/*
	* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
	* Copyright (C) 2010 Freescale Semiconductor, Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
	* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	* for more details.
	*/

	#include <common.h>
	#include <usb.h>
	#include <errno.h>
	#include <linux/compiler.h>
	#include <usb/ehci-fsl.h>
	#include <asm/io.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/mx5x_pins.h>
	#include <asm/arch/iomux.h>

	#include "ehci.h"

	#define MX5_USBOTHER_REGS_OFFSET 0x800


	#define MXC_OTG_OFFSET 0
	#define MXC_H1_OFFSET 0x200
	#define MXC_H2_OFFSET 0x400

	#define MXC_USBCTRL_OFFSET 0
	#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
	#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
	#define MXC_USB_CTRL_1_OFFSET 0x10
	#define MXC_USBH2CTRL_OFFSET 0x14

	/* USB_CTRL */
	/* OTG wakeup intr enable */
	#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27)
	/* OTG power mask */
	#define MXC_OTG_UCTRL_OPM_BIT (1 << 24)
	/* Host1 ULPI interrupt enable */
	#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12)
	/* HOST1 wakeup intr enable */
	#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11)
	/* HOST1 power mask */
	#define MXC_H1_UCTRL_H1PM_BIT (1 << 8)

	/* USB_PHY_CTRL_FUNC */
	/* OTG Disable Overcurrent Event */
	#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8)
	/* UH1 Disable Overcurrent Event */
	#define MXC_H1_OC_DIS_BIT (1 << 5)

	/* USBH2CTRL */
	#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
	#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
	#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)

	/* USB_CTRL_1 */
	#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)

	/* USB pin configuration */
	#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST \| \
	PAD_CTL_DRV_HIGH \| PAD_CTL_100K_PU \| \
	PAD_CTL_HYS_ENABLE \| PAD_CTL_PUE_PULL)

	#ifdef CONFIG_MX51
	/*
	* Configure the MX51 USB H1 IOMUX
	*/
	void setup_iomux_usb_h1(void)
	{
	mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_CLK, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_CLK, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_DIR, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DIR, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_NXT, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_NXT, USB_PAD_CONFIG);

	mxc_request_iomux(MX51_PIN_USBH1_DATA0, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA0, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_DATA1, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA1, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_DATA2, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA2, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_DATA3, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA3, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_DATA4, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA4, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_DATA5, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA5, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_DATA6, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA6, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_USBH1_DATA7, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_USBH1_DATA7, USB_PAD_CONFIG);
	}

	/*
	* Configure the MX51 USB H2 IOMUX
	*/
	void setup_iomux_usb_h2(void)
	{
	mxc_request_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_A24, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_A25, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_A26, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_A27, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_A27, USB_PAD_CONFIG);

	mxc_request_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_D16, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_D17, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_D18, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_D19, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_D20, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_D21, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_D22, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_D22, USB_PAD_CONFIG);
	mxc_request_iomux(MX51_PIN_EIM_D23, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_EIM_D23, USB_PAD_CONFIG);
	}
	#endif

	int mxc_set_usbcontrol(int port, unsigned int flags)
	{
	unsigned int v;
	void __iomem usb_base = (void __iomem )OTG_BASE_ADDR;
	void __iomem *usbother_base;
	int ret = 0;

	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;

	switch (port) {
	case 0: /* OTG port */
	if (flags & MXC_EHCI_INTERNAL_PHY) {
	v = __raw_readl(usbother_base +
	MXC_USB_PHY_CTR_FUNC_OFFSET);
	if (flags & MXC_EHCI_POWER_PINS_ENABLED)
	/* OC/USBPWR is used */
	v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
	else
	/* OC/USBPWR is not used */
	v \|= MXC_OTG_PHYCTRL_OC_DIS_BIT;
	__raw_writel(v, usbother_base +
	MXC_USB_PHY_CTR_FUNC_OFFSET);

	v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
	#ifdef CONFIG_MX51
	if (flags & MXC_EHCI_POWER_PINS_ENABLED)
	v &= ~MXC_OTG_UCTRL_OPM_BIT;
	else
	v \|= MXC_OTG_UCTRL_OPM_BIT;
	#endif
	__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
	}
	break;
	case 1: /* Host 1 ULPI */
	#ifdef CONFIG_MX51
	/* The clock for the USBH1 ULPI port will come externally
	from the PHY. */
	v = __raw_readl(usbother_base + MXC_USB_CTRL_1_OFFSET);
	__raw_writel(v \| MXC_USB_CTRL_UH1_EXT_CLK_EN, usbother_base +
	MXC_USB_CTRL_1_OFFSET);
	#endif

	v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
	#ifdef CONFIG_MX51
	if (flags & MXC_EHCI_POWER_PINS_ENABLED)
	v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */
	else
	v \|= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */
	#endif
	__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);

	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
	if (flags & MXC_EHCI_POWER_PINS_ENABLED)
	v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
	else
	v \|= MXC_H1_OC_DIS_BIT; /* OC is not used */
	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);

	break;
	case 2: /* Host 2 ULPI */
	v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
	#ifdef CONFIG_MX51
	if (flags & MXC_EHCI_POWER_PINS_ENABLED)
	v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */
	else
	v \|= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */
	#endif
	__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
	break;
	}

	return ret;
	}

	void __board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
	{
	}

	void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
	__attribute((weak, alias("__board_ehci_hcd_postinit")));

	int ehci_hcd_init(int index, struct ehci_hccr hccr, struct ehci_hcor hcor)
	{
	struct usb_ehci *ehci;
	#ifdef CONFIG_MX53
	struct clkctl sc_regs = (struct clkctl )CCM_BASE_ADDR;
	u32 reg;

	reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26);
	/* derive USB PHY clock multiplexer from PLL3 */
	reg \|= 1 << 26;
	__raw_writel(reg, &sc_regs->cscmr1);
	#endif

	set_usboh3_clk();
	enable_usboh3_clk(1);
	set_usb_phy_clk();
	enable_usb_phy1_clk(1);
	enable_usb_phy2_clk(1);
	mdelay(1);

	/* Do board specific initialization */
	board_ehci_hcd_init(CONFIG_MXC_USB_PORT);

	ehci = (struct usb_ehci *)(OTG_BASE_ADDR +
	(0x200 * CONFIG_MXC_USB_PORT));
	hccr = (struct ehci_hccr )((uint32_t)&ehci->caplength);
	hcor = (struct ehci_hcor )((uint32_t)*hccr +
	HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
	setbits_le32(&ehci->usbmode, CM_HOST);

	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
	setbits_le32(&ehci->portsc, USB_EN);

	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
	mdelay(10);

	/* Do board specific post-initialization */
	board_ehci_hcd_postinit(ehci, CONFIG_MXC_USB_PORT);

	return 0;
	}

	int ehci_hcd_stop(int index)
	{
	return 0;
	}