| /** @file |
| * Copyright (c) 2017 - 2018, Linaro Limited. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-2-Clause-Patent |
| */ |
| |
| /* These are added for U-Boot to avoid compilation error */ |
| #define PcdNetsecEepromBase 0x08080000 |
| #define FixedPcdGet32(n) n |
| |
| #define GIC_SPI 0 |
| #define GIC_PPI 1 |
| |
| #define IRQ_TYPE_NONE 0 |
| #define IRQ_TYPE_EDGE_RISING 1 |
| #define IRQ_TYPE_EDGE_FALLING 2 |
| #define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING) |
| #define IRQ_TYPE_LEVEL_HIGH 4 |
| #define IRQ_TYPE_LEVEL_LOW 8 |
| |
| #define GPIO_ACTIVE_HIGH 0 |
| #define GPIO_ACTIVE_LOW 1 |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| serial0 = &soc_uart0; |
| serial1 = &fuart; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x1>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU2: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x100>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU3: cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x101>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU4: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x200>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU5: cpu@201 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x201>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU6: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x300>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU7: cpu@301 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x301>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU8: cpu@400 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x400>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU9: cpu@401 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x401>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU10: cpu@500 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x500>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU11: cpu@501 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x501>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU12: cpu@600 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x600>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU13: cpu@601 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x601>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU14: cpu@700 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x700>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU15: cpu@701 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x701>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU16: cpu@800 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x800>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU17: cpu@801 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x801>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU18: cpu@900 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x900>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU19: cpu@901 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x901>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU20: cpu@a00 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0xa00>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU21: cpu@a01 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0xa01>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU22: cpu@b00 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0xb00>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| CPU23: cpu@b01 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0xb01>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| }; |
| cluster1 { |
| core0 { |
| cpu = <&CPU2>; |
| }; |
| core1 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| cluster2 { |
| core0 { |
| cpu = <&CPU4>; |
| }; |
| core1 { |
| cpu = <&CPU5>; |
| }; |
| }; |
| cluster3 { |
| core0 { |
| cpu = <&CPU6>; |
| }; |
| core1 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| cluster4 { |
| core0 { |
| cpu = <&CPU8>; |
| }; |
| core1 { |
| cpu = <&CPU9>; |
| }; |
| }; |
| cluster5 { |
| core0 { |
| cpu = <&CPU10>; |
| }; |
| core1 { |
| cpu = <&CPU11>; |
| }; |
| }; |
| cluster6 { |
| core0 { |
| cpu = <&CPU12>; |
| }; |
| core1 { |
| cpu = <&CPU13>; |
| }; |
| }; |
| cluster7 { |
| core0 { |
| cpu = <&CPU14>; |
| }; |
| core1 { |
| cpu = <&CPU15>; |
| }; |
| }; |
| cluster8 { |
| core0 { |
| cpu = <&CPU16>; |
| }; |
| core1 { |
| cpu = <&CPU17>; |
| }; |
| }; |
| cluster9 { |
| core0 { |
| cpu = <&CPU18>; |
| }; |
| core1 { |
| cpu = <&CPU19>; |
| }; |
| }; |
| cluster10 { |
| core0 { |
| cpu = <&CPU20>; |
| }; |
| core1 { |
| cpu = <&CPU21>; |
| }; |
| }; |
| cluster11 { |
| core0 { |
| cpu = <&CPU22>; |
| }; |
| core1 { |
| cpu = <&CPU23>; |
| }; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| CPU_SLEEP_0: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| arm,psci-suspend-param = <0x0010000>; |
| entry-latency-us = <300>; |
| exit-latency-us = <1200>; |
| min-residency-us = <2000>; |
| local-timer-stop; |
| }; |
| |
| CLUSTER_SLEEP_0: cluster-sleep-0 { |
| compatible = "arm,idle-state"; |
| arm,psci-suspend-param = <0x1010000>; |
| entry-latency-us = <400>; |
| exit-latency-us = <1200>; |
| min-residency-us = <2500>; |
| local-timer-stop; |
| }; |
| }; |
| |
| gic: interrupt-controller@30000000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x30000000 0x0 0x10000>, // GICD |
| <0x0 0x30400000 0x0 0x300000>, // GICR |
| <0x0 0x2c000000 0x0 0x2000>, // GICC |
| <0x0 0x2c010000 0x0 0x1000>, // GICH |
| <0x0 0x2c020000 0x0 0x10000>; // GICV |
| #interrupt-cells = <3>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; |
| |
| its: msi-controller@30020000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0x0 0x30020000 0x0 0x20000>; |
| #msi-cells = <1>; |
| msi-controller; |
| socionext,synquacer-pre-its = <0x58000000 0x200000>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, // secure |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, // non-secure |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, // virtual |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; // HYP |
| }; |
| |
| timer@2a810000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x2a810000 0x0 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x2a810000 0x30000>; |
| frame@20000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x20000 0x10000>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| clk_uart: refclk62500khz { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <62500000>; |
| clock-output-names = "uartclk"; |
| }; |
| |
| clk_apb: refclk100mhz { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| clock-output-names = "apb_pclk"; |
| }; |
| |
| soc_uart0: serial@2a400000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0x2a400000 0x0 0x1000>; |
| interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_uart>, <&clk_apb>; |
| clock-names = "uartclk", "apb_pclk"; |
| }; |
| |
| fuart: serial@51040000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x0 0x51040000 0x0 0x1000>; |
| interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_uart>, <&clk_apb>; |
| clock-names = "baudclk", "apb_pclk"; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| }; |
| |
| clk_netsec: refclk250mhz { |
| compatible = "fixed-clock"; |
| clock-frequency = <250000000>; |
| #clock-cells = <0>; |
| }; |
| |
| netsec: ethernet@522d0000 { |
| compatible = "socionext,synquacer-netsec"; |
| reg = <0 0x522d0000 0x0 0x10000>, |
| <0 FixedPcdGet32 (PcdNetsecEepromBase) 0x0 0x10000>; |
| interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_netsec>; |
| clock-names = "phy_ref_clk"; |
| max-speed = <1000>; |
| max-frame-size = <9000>; |
| phy-handle = <&phy_netsec>; |
| dma-coherent; |
| |
| mdio_netsec: mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| smmu: iommu@582c0000 { |
| compatible = "arm,mmu-500", "arm,smmu-v2"; |
| reg = <0x0 0x582c0000 0x0 0x10000>; |
| #global-interrupts = <1>; |
| interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| pcie0: pcie@60000000 { |
| compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; |
| device_type = "pci"; |
| reg = <0x0 0x60000000 0x0 0x7f00000>; |
| bus-range = <0x0 0x7e>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x1000000 0x00 0x00000000 0x00 0x67f00000 0x0 0x00010000>, |
| <0x2000000 0x00 0x68000000 0x00 0x68000000 0x0 0x08000000>, |
| <0x3000000 0x3e 0x00000000 0x3e 0x00000000 0x1 0x00000000>; |
| |
| #interrupt-cells = <0x1>; |
| interrupt-map-mask = <0x0 0x0 0x0 0x0>; |
| interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| |
| msi-map = <0x000 &its 0x0 0x7f00>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| pcie1: pcie@70000000 { |
| compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; |
| device_type = "pci"; |
| reg = <0x0 0x70000000 0x0 0x7f00000>; |
| bus-range = <0x0 0x7e>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x1000000 0x00 0x00000000 0x00 0x77f00000 0x0 0x00010000>, |
| <0x2000000 0x00 0x78000000 0x00 0x78000000 0x0 0x08000000>, |
| <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>; |
| |
| #interrupt-cells = <0x1>; |
| interrupt-map-mask = <0x0 0x0 0x0 0x0>; |
| interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; |
| |
| msi-map = <0x0 &its 0x10000 0x7f00>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| gpio: gpio@51000000 { |
| compatible = "socionext,synquacer-gpio", "fujitsu,mb86s70-gpio"; |
| reg = <0x0 0x51000000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| clocks = <&clk_apb>; |
| }; |
| |
| exiu: interrupt-controller@510c0000 { |
| compatible = "socionext,synquacer-exiu"; |
| reg = <0x0 0x510c0000 0x0 0x20>; |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| #interrupt-cells = <3>; |
| socionext,spi-base = <112>; |
| }; |
| |
| clk_alw_b_0: bclk200 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <200000000>; |
| clock-output-names = "sd_bclk"; |
| }; |
| |
| clk_alw_c_0: sd4clk800 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <800000000>; |
| clock-output-names = "sd_sd4clk"; |
| }; |
| |
| sdhci: mmc@52300000 { |
| compatible = "socionext,synquacer-sdhci", "fujitsu,mb86s70-sdhci-3.0"; |
| reg = <0 0x52300000 0x0 0x1000>; |
| interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; |
| bus-width = <8>; |
| cap-mmc-highspeed; |
| fujitsu,cmd-dat-delay-select; |
| clocks = <&clk_alw_c_0 &clk_alw_b_0>; |
| clock-names = "core", "iface"; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| clk_alw_1_8: spi_ihclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <125000000>; |
| clock-output-names = "iHCLK"; |
| }; |
| |
| spi: spi@54810000 { |
| compatible = "socionext,synquacer-spi"; |
| reg = <0x0 0x54810000 0x0 0x1000>; |
| interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_alw_1_8>; |
| clock-names = "iHCLK"; |
| socionext,use-rtm; |
| socionext,set-aces; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| clk_i2c: i2c_pclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <62500000>; |
| clock-output-names = "pclk"; |
| }; |
| |
| i2c: i2c@51210000 { |
| compatible = "socionext,synquacer-i2c"; |
| reg = <0x0 0x51210000 0x0 0x1000>; |
| interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_i2c>; |
| clock-names = "pclk"; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| tpm: tpm_tis@10000000 { |
| compatible = "socionext,synquacer-tpm-mmio"; |
| reg = <0x0 0x10000000 0x0 0x5000>; |
| status = "disabled"; |
| }; |
| |
| firmware { |
| optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| #include "synquacer-sc2a11-caches.dtsi" |