doc/develop/qconfig.rst - platform/external/u-boot - Gitiles

 .. SPDX-License-Identifier: GPL-2.0+

 qconfig - Querying CONFIG options
 =================================

 It is not possible to see all the CONFIG options used by a board without
 building its `.config` file. This tool allows this to be done efficiently for
 all boards, or a subset, writing the results to a unified database file.

 This database can be queried, to find boards which used a certain combination
 of options, to aid in discovering Kconfig options which imply others.

 The tool also permits syncing of defconfigs, which corrects the ordering and
 drops options which are implied by others.

 Finally, it allows scanning the source code to look for inconsistencies in the
 use of Kconfig options.

 Installation
 ------------

 You may need to install 'python3-asteval' for the 'asteval' module.

 How does it work?
 -----------------

 When building a database (`-b`), this tool runs configuration and builds
 include/autoconf.mk for every defconfig.  The config options defined in Kconfig
 appear in the .config file (unless they are hidden because of unmet dependency.)
 On the other hand, the config options defined by board headers are seen
 in include/autoconf.mk.

 When resyncing defconfigs (`-s`) the .config is synced by "make savedefconfig"
 and the defconfig is updated with it.

 For faster processing, this tool is multi-threaded.  It creates
 separate build directories where the out-of-tree build is run.  The
 temporary build directories are automatically created and deleted as
 needed.  The number of threads are chosen based on the number of the CPU
 cores of your system although you can change it via -j (--jobs) option.

 Note that `*.config` fragments are not supported.

 Toolchains
 ----------

 Appropriate toolchains are necessary to generate include/autoconf.mk
 for all the architectures supported by U-Boot.  Most of them are available
 at the kernel.org site. This tool uses the same tools as
 :doc:`../build/buildman`, so you can use `buildman --fetch-arch` to fetch
 toolchains.


 Examples
 --------

 To sync only X86 defconfigs::

    ./tools/qconfig.py -s -d <(grep -l X86 configs/*)

 or::

    grep -l X86 configs/* | ./tools/qconfig.py -s -d -

 To process CONFIG_CMD_FPGAD only for a subset of configs based on path match::

    ls configs/{hrcon*,iocon*,strider*} | \
        ./tools/qconfig.py -C CONFIG_CMD_FPGAD -d -


 Finding boards with particular CONFIG combinations
 --------------------------------------------------

 You can use `qconfig.py` to figure out which boards have a CONFIG enabled, or
 which do not. To use it, first build a database::

     ./tools/qconfig.py -b

 Then you can run queries using the `-f` flag followed by a list of CONFIG terms.
 Each term is CONFIG name, with or without a tilde (~) prefix. The tool searches
 for boards which match the CONFIG name, or do not match if tilde is used. For
 example, to find boards which enabled CONFIG_SCSI but not CONFIG_BLK::

     tools/qconfig.py -f SCSI ~BLK
     3 matches
     pg_wcom_seli8_defconfig highbank_defconfig pg_wcom_expu1_defconfig


 Finding implied CONFIGs
 -----------------------

 Some CONFIG options can be implied by others and this can help to reduce
 the size of the defconfig files. For example, CONFIG_X86 implies
 CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and
 all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to
 each of the x86 defconfig files.

 This tool can help find such configs. To use it, first build a database::

     ./tools/qconfig.py -b

 Then try to query it::

    ./tools/qconfig.py -i CONFIG_I8042_KEYB
    CONFIG_I8042_KEYB found in 33/5155 defconfigs
    28 : CONFIG_X86
    28 : CONFIG_SA_PCIEX_LENGTH
    28 : CONFIG_HPET_ADDRESS
    28 : CONFIG_MAX_PIRQ_LINKS
    28 : CONFIG_I8254_TIMER
    28 : CONFIG_I8259_PIC
    28 : CONFIG_RAMBASE
    28 : CONFIG_IRQ_SLOT_COUNT
    28 : CONFIG_PCIE_ECAM_SIZE
    28 : CONFIG_APIC
    ...

 This shows a list of config options which might imply CONFIG_I8042_KEYB along
 with how many defconfigs they cover. From this you can see that CONFIG_X86
 generally implies CONFIG_I8042_KEYB but not always (28 out of 35). Therefore,
 instead of adding CONFIG_I8042_KEYB to
 the defconfig of every x86 board, you could add a single imply line to the
 Kconfig file::

     config X86
         bool "x86 architecture"
         ...
         imply CMD_EEPROM

 That will cover 28 defconfigs and you can perhaps find another condition that
 indicates that CONFIG_I8042_KEYB is not needed for the remaining 5 boards. Many
 of the options listed are not suitable as they are not related. E.g. it would be
 odd for CONFIG_RAMBASE to imply CONFIG_I8042_KEYB.

 Using this search you can reduce the size of qconfig patches.

 You can automatically add 'imply' statements in the Kconfig with the -a
 option::

     ./tools/qconfig.py -s -i CONFIG_SCSI \
             -a CONFIG_ARCH_LS1021A,CONFIG_ARCH_LS1043A

 This will add 'imply SCSI' to the two CONFIG options mentioned, assuming that
 the database indicates that they do actually imply CONFIG_SCSI and do not
 already have an 'imply SCSI'.

 The output shows where the imply is added::

    18 : CONFIG_ARCH_LS1021A       arch/arm/cpu/armv7/ls102xa/Kconfig:1
    13 : CONFIG_ARCH_LS1043A       arch/arm/cpu/armv8/fsl-layerscape/Kconfig:11
    12 : CONFIG_ARCH_LS1046A       arch/arm/cpu/armv8/fsl-layerscape/Kconfig:31

 The first number is the number of boards which can avoid having a special
 CONFIG_SCSI option in their defconfig file if this 'imply' is added.
 The location at the right is the Kconfig file and line number where the config
 appears. For example, adding 'imply CONFIG_SCSI' to the 'config ARCH_LS1021A'
 in arch/arm/cpu/armv7/ls102xa/Kconfig at line 1 will help 18 boards to reduce
 the size of their defconfig files.

 If you want to add an 'imply' to every imply config in the list, you can use::

     ./tools/qconfig.py -s -i CONFIG_SCSI -a all

 To control which ones are displayed, use -I <list> where list is a list of
 options (use '-I help' to see possible options and their meaning).

 To skip showing you options that already have an 'imply' attached, use -A.

 When you have finished adding 'imply' options you can regenerate the
 defconfig files for affected boards with something like::

     git show --stat | ./tools/qconfig.py -s -d -

 This will regenerate only those defconfigs changed in the current commit.
 If you start with (say) 100 defconfigs being changed in the commit, and add
 a few 'imply' options as above, then regenerate, hopefully you can reduce the
 number of defconfigs changed in the commit.


 Available options
 -----------------

  --nocolour
    Disables colouring of output. This is normally used when writing to a
    terminal.

  -C, --commit
    Create a git commit with the changes when the operation is complete. A
    standard commit message is used which may need to be edited.

  -d, --defconfigs
   Specify a file containing a list of defconfigs to move.  The defconfig
   files can be given with shell-style wildcards. Use '-' to read from stdin.

  -f, --find
    Find boards with a given config combination

  -n, --dry-run
    Perform a trial run that does not make any changes.  It is useful to
    see what is going to happen before one actually runs it.

  -e, --exit-on-error
    Exit immediately if Make exits with a non-zero status while processing
    a defconfig file.

  -s, --force-sync
    Do "make savedefconfig" forcibly for all the defconfig files.
    If not specified, "make savedefconfig" only occurs for cases
    where at least one CONFIG was moved.

  -S, --spl
    Look for moved config options in spl/include/autoconf.mk instead of
    include/autoconf.mk.  This is useful for moving options for SPL build
    because SPL related options (mostly prefixed with CONFIG_SPL\_) are
    sometimes blocked by CONFIG_SPL_BUILD ifdef conditionals.

  -j, --jobs
    Specify the number of threads to run simultaneously.  If not specified,
    the number of threads is the same as the number of CPU cores.

  -r, --git-ref
    Specify the git ref to clone for building the autoconf.mk. If unspecified
    use the CWD. This is useful for when changes to the Kconfig affect the
    default values and you want to capture the state of the defconfig from
    before that change was in effect. If in doubt, specify a ref pre-Kconfig
    changes (use HEAD if Kconfig changes are not committed). Worst case it will
    take a bit longer to run, but will always do the right thing.

  -v, --verbose
    Show any build errors as boards are built

 To see the complete list of supported options, run::

   tools/qconfig.py -h
	.. SPDX-License-Identifier: GPL-2.0+

	qconfig - Querying CONFIG options
	=================================

	It is not possible to see all the CONFIG options used by a board without
	building its `.config` file. This tool allows this to be done efficiently for
	all boards, or a subset, writing the results to a unified database file.

	This database can be queried, to find boards which used a certain combination
	of options, to aid in discovering Kconfig options which imply others.

	The tool also permits syncing of defconfigs, which corrects the ordering and
	drops options which are implied by others.

	Finally, it allows scanning the source code to look for inconsistencies in the
	use of Kconfig options.

	Installation
	------------

	You may need to install 'python3-asteval' for the 'asteval' module.

	How does it work?
	-----------------

	When building a database (`-b`), this tool runs configuration and builds
	include/autoconf.mk for every defconfig. The config options defined in Kconfig
	appear in the .config file (unless they are hidden because of unmet dependency.)
	On the other hand, the config options defined by board headers are seen
	in include/autoconf.mk.

	When resyncing defconfigs (`-s`) the .config is synced by "make savedefconfig"
	and the defconfig is updated with it.

	For faster processing, this tool is multi-threaded. It creates
	separate build directories where the out-of-tree build is run. The
	temporary build directories are automatically created and deleted as
	needed. The number of threads are chosen based on the number of the CPU
	cores of your system although you can change it via -j (--jobs) option.

	Note that `*.config` fragments are not supported.

	Toolchains
	----------

	Appropriate toolchains are necessary to generate include/autoconf.mk
	for all the architectures supported by U-Boot. Most of them are available
	at the kernel.org site. This tool uses the same tools as
	:doc:`../build/buildman`, so you can use `buildman --fetch-arch` to fetch
	toolchains.


	Examples
	--------

	To sync only X86 defconfigs::

	./tools/qconfig.py -s -d <(grep -l X86 configs/*)

	or::

	grep -l X86 configs/* \| ./tools/qconfig.py -s -d -

	To process CONFIG_CMD_FPGAD only for a subset of configs based on path match::

	ls configs/{hrcon,iocon,strider*} \| \
	./tools/qconfig.py -C CONFIG_CMD_FPGAD -d -


	Finding boards with particular CONFIG combinations
	--------------------------------------------------

	You can use `qconfig.py` to figure out which boards have a CONFIG enabled, or
	which do not. To use it, first build a database::

	./tools/qconfig.py -b

	Then you can run queries using the `-f` flag followed by a list of CONFIG terms.
	Each term is CONFIG name, with or without a tilde (~) prefix. The tool searches
	for boards which match the CONFIG name, or do not match if tilde is used. For
	example, to find boards which enabled CONFIG_SCSI but not CONFIG_BLK::

	tools/qconfig.py -f SCSI ~BLK
	3 matches
	pg_wcom_seli8_defconfig highbank_defconfig pg_wcom_expu1_defconfig


	Finding implied CONFIGs
	-----------------------

	Some CONFIG options can be implied by others and this can help to reduce
	the size of the defconfig files. For example, CONFIG_X86 implies
	CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and
	all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to
	each of the x86 defconfig files.

	This tool can help find such configs. To use it, first build a database::

	./tools/qconfig.py -b

	Then try to query it::

	./tools/qconfig.py -i CONFIG_I8042_KEYB
	CONFIG_I8042_KEYB found in 33/5155 defconfigs
	28 : CONFIG_X86
	28 : CONFIG_SA_PCIEX_LENGTH
	28 : CONFIG_HPET_ADDRESS
	28 : CONFIG_MAX_PIRQ_LINKS
	28 : CONFIG_I8254_TIMER
	28 : CONFIG_I8259_PIC
	28 : CONFIG_RAMBASE
	28 : CONFIG_IRQ_SLOT_COUNT
	28 : CONFIG_PCIE_ECAM_SIZE
	28 : CONFIG_APIC
	...

	This shows a list of config options which might imply CONFIG_I8042_KEYB along
	with how many defconfigs they cover. From this you can see that CONFIG_X86
	generally implies CONFIG_I8042_KEYB but not always (28 out of 35). Therefore,
	instead of adding CONFIG_I8042_KEYB to
	the defconfig of every x86 board, you could add a single imply line to the
	Kconfig file::

	config X86
	bool "x86 architecture"
	...
	imply CMD_EEPROM

	That will cover 28 defconfigs and you can perhaps find another condition that
	indicates that CONFIG_I8042_KEYB is not needed for the remaining 5 boards. Many
	of the options listed are not suitable as they are not related. E.g. it would be
	odd for CONFIG_RAMBASE to imply CONFIG_I8042_KEYB.

	Using this search you can reduce the size of qconfig patches.

	You can automatically add 'imply' statements in the Kconfig with the -a
	option::

	./tools/qconfig.py -s -i CONFIG_SCSI \
	-a CONFIG_ARCH_LS1021A,CONFIG_ARCH_LS1043A

	This will add 'imply SCSI' to the two CONFIG options mentioned, assuming that
	the database indicates that they do actually imply CONFIG_SCSI and do not
	already have an 'imply SCSI'.

	The output shows where the imply is added::

	18 : CONFIG_ARCH_LS1021A arch/arm/cpu/armv7/ls102xa/Kconfig:1
	13 : CONFIG_ARCH_LS1043A arch/arm/cpu/armv8/fsl-layerscape/Kconfig:11
	12 : CONFIG_ARCH_LS1046A arch/arm/cpu/armv8/fsl-layerscape/Kconfig:31

	The first number is the number of boards which can avoid having a special
	CONFIG_SCSI option in their defconfig file if this 'imply' is added.
	The location at the right is the Kconfig file and line number where the config
	appears. For example, adding 'imply CONFIG_SCSI' to the 'config ARCH_LS1021A'
	in arch/arm/cpu/armv7/ls102xa/Kconfig at line 1 will help 18 boards to reduce
	the size of their defconfig files.

	If you want to add an 'imply' to every imply config in the list, you can use::

	./tools/qconfig.py -s -i CONFIG_SCSI -a all

	To control which ones are displayed, use -I <list> where list is a list of
	options (use '-I help' to see possible options and their meaning).

	To skip showing you options that already have an 'imply' attached, use -A.

	When you have finished adding 'imply' options you can regenerate the
	defconfig files for affected boards with something like::

	git show --stat \| ./tools/qconfig.py -s -d -

	This will regenerate only those defconfigs changed in the current commit.
	If you start with (say) 100 defconfigs being changed in the commit, and add
	a few 'imply' options as above, then regenerate, hopefully you can reduce the
	number of defconfigs changed in the commit.


	Available options
	-----------------

	--nocolour
	Disables colouring of output. This is normally used when writing to a
	terminal.

	-C, --commit
	Create a git commit with the changes when the operation is complete. A
	standard commit message is used which may need to be edited.

	-d, --defconfigs
	Specify a file containing a list of defconfigs to move. The defconfig
	files can be given with shell-style wildcards. Use '-' to read from stdin.

	-f, --find
	Find boards with a given config combination

	-n, --dry-run
	Perform a trial run that does not make any changes. It is useful to
	see what is going to happen before one actually runs it.

	-e, --exit-on-error
	Exit immediately if Make exits with a non-zero status while processing
	a defconfig file.

	-s, --force-sync
	Do "make savedefconfig" forcibly for all the defconfig files.
	If not specified, "make savedefconfig" only occurs for cases
	where at least one CONFIG was moved.

	-S, --spl
	Look for moved config options in spl/include/autoconf.mk instead of
	include/autoconf.mk. This is useful for moving options for SPL build
	because SPL related options (mostly prefixed with CONFIG_SPL\_) are
	sometimes blocked by CONFIG_SPL_BUILD ifdef conditionals.

	-j, --jobs
	Specify the number of threads to run simultaneously. If not specified,
	the number of threads is the same as the number of CPU cores.

	-r, --git-ref
	Specify the git ref to clone for building the autoconf.mk. If unspecified
	use the CWD. This is useful for when changes to the Kconfig affect the
	default values and you want to capture the state of the defconfig from
	before that change was in effect. If in doubt, specify a ref pre-Kconfig
	changes (use HEAD if Kconfig changes are not committed). Worst case it will
	take a bit longer to run, but will always do the right thing.

	-v, --verbose
	Show any build errors as boards are built

	To see the complete list of supported options, run::

	tools/qconfig.py -h