| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com> |
| * (C) Copyright 2021 Asherah Connor <ashe@kivikakk.ee> |
| */ |
| |
| #define LOG_CATEGORY UCLASS_QFW |
| |
| #include <common.h> |
| #include <bootdev.h> |
| #include <bootflow.h> |
| #include <bootmeth.h> |
| #include <command.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <qfw.h> |
| #include <dm.h> |
| #include <misc.h> |
| #include <tables_csum.h> |
| #include <asm/acpi_table.h> |
| |
| #if defined(CONFIG_GENERATE_ACPI_TABLE) && !defined(CONFIG_SANDBOX) |
| /* |
| * This function allocates memory for ACPI tables |
| * |
| * @entry : BIOS linker command entry which tells where to allocate memory |
| * (either high memory or low memory) |
| * @addr : The address that should be used for low memory allcation. If the |
| * memory allocation request is 'ZONE_HIGH' then this parameter will |
| * be ignored. |
| * @return: 0 on success, or negative value on failure |
| */ |
| static int bios_linker_allocate(struct udevice *dev, |
| struct bios_linker_entry *entry, ulong *addr) |
| { |
| uint32_t size, align; |
| struct fw_file *file; |
| unsigned long aligned_addr; |
| |
| align = le32_to_cpu(entry->alloc.align); |
| /* align must be power of 2 */ |
| if (align & (align - 1)) { |
| printf("error: wrong alignment %u\n", align); |
| return -EINVAL; |
| } |
| |
| file = qfw_find_file(dev, entry->alloc.file); |
| if (!file) { |
| printf("error: can't find file %s\n", entry->alloc.file); |
| return -ENOENT; |
| } |
| |
| size = be32_to_cpu(file->cfg.size); |
| |
| /* |
| * ZONE_HIGH means we need to allocate from high memory, since |
| * malloc space is already at the end of RAM, so we directly use it. |
| * If allocation zone is ZONE_FSEG, then we use the 'addr' passed |
| * in which is low memory |
| */ |
| if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) { |
| aligned_addr = (unsigned long)memalign(align, size); |
| if (!aligned_addr) { |
| printf("error: allocating resource\n"); |
| return -ENOMEM; |
| } |
| if (aligned_addr < gd->arch.table_start_high) |
| gd->arch.table_start_high = aligned_addr; |
| if (aligned_addr + size > gd->arch.table_end_high) |
| gd->arch.table_end_high = aligned_addr + size; |
| |
| } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) { |
| aligned_addr = ALIGN(*addr, align); |
| } else { |
| printf("error: invalid allocation zone\n"); |
| return -EINVAL; |
| } |
| |
| debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n", |
| file->cfg.name, size, entry->alloc.zone, align, aligned_addr); |
| |
| qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, |
| (void *)aligned_addr); |
| file->addr = aligned_addr; |
| |
| /* adjust address for low memory allocation */ |
| if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) |
| *addr = (aligned_addr + size); |
| |
| return 0; |
| } |
| |
| /* |
| * This function patches ACPI tables previously loaded |
| * by bios_linker_allocate() |
| * |
| * @entry : BIOS linker command entry which tells how to patch |
| * ACPI tables |
| * @return: 0 on success, or negative value on failure |
| */ |
| static int bios_linker_add_pointer(struct udevice *dev, |
| struct bios_linker_entry *entry) |
| { |
| struct fw_file *dest, *src; |
| uint32_t offset = le32_to_cpu(entry->pointer.offset); |
| uint64_t pointer = 0; |
| |
| dest = qfw_find_file(dev, entry->pointer.dest_file); |
| if (!dest || !dest->addr) |
| return -ENOENT; |
| src = qfw_find_file(dev, entry->pointer.src_file); |
| if (!src || !src->addr) |
| return -ENOENT; |
| |
| debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n", |
| dest->addr, src->addr, offset, entry->pointer.size, pointer); |
| |
| memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size); |
| pointer = le64_to_cpu(pointer); |
| pointer += (unsigned long)src->addr; |
| pointer = cpu_to_le64(pointer); |
| memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size); |
| |
| return 0; |
| } |
| |
| /* |
| * This function updates checksum fields of ACPI tables previously loaded |
| * by bios_linker_allocate() |
| * |
| * @entry : BIOS linker command entry which tells where to update ACPI table |
| * checksums |
| * @return: 0 on success, or negative value on failure |
| */ |
| static int bios_linker_add_checksum(struct udevice *dev, |
| struct bios_linker_entry *entry) |
| { |
| struct fw_file *file; |
| uint8_t *data, cksum = 0; |
| uint8_t *cksum_start; |
| |
| file = qfw_find_file(dev, entry->cksum.file); |
| if (!file || !file->addr) |
| return -ENOENT; |
| |
| data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset)); |
| cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start)); |
| cksum = table_compute_checksum(cksum_start, |
| le32_to_cpu(entry->cksum.length)); |
| *data = cksum; |
| |
| return 0; |
| } |
| |
| /* This function loads and patches ACPI tables provided by QEMU */ |
| ulong write_acpi_tables(ulong addr) |
| { |
| int i, ret; |
| struct fw_file *file; |
| struct bios_linker_entry *table_loader; |
| struct bios_linker_entry *entry; |
| uint32_t size; |
| struct udevice *dev; |
| |
| ret = qfw_get_dev(&dev); |
| if (ret) { |
| printf("error: no qfw\n"); |
| return addr; |
| } |
| |
| /* make sure fw_list is loaded */ |
| ret = qfw_read_firmware_list(dev); |
| if (ret) { |
| printf("error: can't read firmware file list\n"); |
| return addr; |
| } |
| |
| file = qfw_find_file(dev, "etc/table-loader"); |
| if (!file) { |
| printf("error: can't find etc/table-loader\n"); |
| return addr; |
| } |
| |
| size = be32_to_cpu(file->cfg.size); |
| if ((size % sizeof(*entry)) != 0) { |
| printf("error: table-loader maybe corrupted\n"); |
| return addr; |
| } |
| |
| table_loader = malloc(size); |
| if (!table_loader) { |
| printf("error: no memory for table-loader\n"); |
| return addr; |
| } |
| |
| /* QFW always puts tables at high addresses */ |
| gd->arch.table_start_high = (ulong)table_loader; |
| gd->arch.table_end_high = (ulong)table_loader; |
| |
| qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, table_loader); |
| |
| for (i = 0; i < (size / sizeof(*entry)); i++) { |
| entry = table_loader + i; |
| switch (le32_to_cpu(entry->command)) { |
| case BIOS_LINKER_LOADER_COMMAND_ALLOCATE: |
| ret = bios_linker_allocate(dev, entry, &addr); |
| if (ret) |
| goto out; |
| break; |
| case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER: |
| ret = bios_linker_add_pointer(dev, entry); |
| if (ret) |
| goto out; |
| break; |
| case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM: |
| ret = bios_linker_add_checksum(dev, entry); |
| if (ret) |
| goto out; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| out: |
| if (ret) { |
| struct fw_cfg_file_iter iter; |
| for (file = qfw_file_iter_init(dev, &iter); |
| !qfw_file_iter_end(&iter); |
| file = qfw_file_iter_next(&iter)) { |
| if (file->addr) { |
| free((void *)file->addr); |
| file->addr = 0; |
| } |
| } |
| } |
| |
| free(table_loader); |
| |
| gd_set_acpi_start(acpi_get_rsdp_addr()); |
| |
| return addr; |
| } |
| |
| ulong acpi_get_rsdp_addr(void) |
| { |
| int ret; |
| struct fw_file *file; |
| struct udevice *dev; |
| |
| ret = qfw_get_dev(&dev); |
| if (ret) { |
| printf("error: no qfw\n"); |
| return 0; |
| } |
| |
| file = qfw_find_file(dev, "etc/acpi/rsdp"); |
| return file->addr; |
| } |
| #endif |
| |
| static void qfw_read_entry_io(struct qfw_dev *qdev, u16 entry, u32 size, |
| void *address) |
| { |
| struct dm_qfw_ops *ops = dm_qfw_get_ops(qdev->dev); |
| |
| debug("%s: entry 0x%x, size %u address %p\n", __func__, entry, size, |
| address); |
| |
| ops->read_entry_io(qdev->dev, entry, size, address); |
| } |
| |
| static void qfw_read_entry_dma(struct qfw_dev *qdev, u16 entry, u32 size, |
| void *address) |
| { |
| struct dm_qfw_ops *ops = dm_qfw_get_ops(qdev->dev); |
| |
| struct qfw_dma dma = { |
| .length = cpu_to_be32(size), |
| .address = cpu_to_be64((uintptr_t)address), |
| .control = cpu_to_be32(FW_CFG_DMA_READ), |
| }; |
| |
| /* |
| * writing FW_CFG_INVALID will cause read operation to resume at last |
| * offset, otherwise read will start at offset 0 |
| */ |
| if (entry != FW_CFG_INVALID) |
| dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16)); |
| |
| debug("%s: entry 0x%x, size %u address %p, control 0x%x\n", __func__, |
| entry, size, address, be32_to_cpu(dma.control)); |
| |
| barrier(); |
| |
| ops->read_entry_dma(qdev->dev, &dma); |
| } |
| |
| void qfw_read_entry(struct udevice *dev, u16 entry, u32 size, void *address) |
| { |
| struct qfw_dev *qdev = dev_get_uclass_priv(dev); |
| |
| if (qdev->dma_present) |
| qfw_read_entry_dma(qdev, entry, size, address); |
| else |
| qfw_read_entry_io(qdev, entry, size, address); |
| } |
| |
| int qfw_register(struct udevice *dev) |
| { |
| struct qfw_dev *qdev = dev_get_uclass_priv(dev); |
| u32 qemu, dma_enabled; |
| |
| qdev->dev = dev; |
| INIT_LIST_HEAD(&qdev->fw_list); |
| |
| qfw_read_entry_io(qdev, FW_CFG_SIGNATURE, 4, &qemu); |
| if (be32_to_cpu(qemu) != QEMU_FW_CFG_SIGNATURE) |
| return -ENODEV; |
| |
| qfw_read_entry_io(qdev, FW_CFG_ID, 1, &dma_enabled); |
| if (dma_enabled & FW_CFG_DMA_ENABLED) |
| qdev->dma_present = true; |
| |
| return 0; |
| } |
| |
| static int qfw_post_bind(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = bootdev_setup_for_dev(dev, "qfw_bootdev"); |
| if (ret) |
| return log_msg_ret("dev", ret); |
| |
| return 0; |
| } |
| |
| static int qfw_get_bootflow(struct udevice *dev, struct bootflow_iter *iter, |
| struct bootflow *bflow) |
| { |
| const struct udevice *media = dev_get_parent(dev); |
| int ret; |
| |
| if (!CONFIG_IS_ENABLED(BOOTSTD)) |
| return -ENOSYS; |
| |
| log_debug("media=%s\n", media->name); |
| ret = bootmeth_check(bflow->method, iter); |
| if (ret) |
| return log_msg_ret("check", ret); |
| |
| log_debug("iter->part=%d\n", iter->part); |
| |
| /* We only support the whole device, not partitions */ |
| if (iter->part) |
| return log_msg_ret("max", -ESHUTDOWN); |
| |
| log_debug("reading bootflow with method: %s\n", bflow->method->name); |
| ret = bootmeth_read_bootflow(bflow->method, bflow); |
| if (ret) |
| return log_msg_ret("method", ret); |
| |
| return 0; |
| } |
| |
| static int qfw_bootdev_bind(struct udevice *dev) |
| { |
| struct bootdev_uc_plat *ucp = dev_get_uclass_plat(dev); |
| |
| ucp->prio = BOOTDEVP_4_SCAN_FAST; |
| |
| return 0; |
| } |
| |
| static int qfw_bootdev_hunt(struct bootdev_hunter *info, bool show) |
| { |
| int ret; |
| |
| ret = uclass_probe_all(UCLASS_QFW); |
| if (ret && ret != -ENOENT) |
| return log_msg_ret("vir", ret); |
| |
| return 0; |
| } |
| |
| UCLASS_DRIVER(qfw) = { |
| .id = UCLASS_QFW, |
| .name = "qfw", |
| .post_bind = qfw_post_bind, |
| .per_device_auto = sizeof(struct qfw_dev), |
| }; |
| |
| struct bootdev_ops qfw_bootdev_ops = { |
| .get_bootflow = qfw_get_bootflow, |
| }; |
| |
| static const struct udevice_id qfw_bootdev_ids[] = { |
| { .compatible = "u-boot,bootdev-qfw" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(qfw_bootdev) = { |
| .name = "qfw_bootdev", |
| .id = UCLASS_BOOTDEV, |
| .ops = &qfw_bootdev_ops, |
| .bind = qfw_bootdev_bind, |
| .of_match = qfw_bootdev_ids, |
| }; |
| |
| BOOTDEV_HUNTER(qfw_bootdev_hunter) = { |
| .prio = BOOTDEVP_4_SCAN_FAST, |
| .uclass = UCLASS_QFW, |
| .hunt = qfw_bootdev_hunt, |
| .drv = DM_DRIVER_REF(qfw_bootdev), |
| }; |