| # |
| # (C) Copyright 2000-2011 |
| # Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| # |
| # See file CREDITS for list of people who contributed to this |
| # project. |
| # |
| # This program is free software; you can redistribute it and/or |
| # modify it under the terms of the GNU General Public License as |
| # published by the Free Software Foundatio; either version 2 of |
| # the License, or (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| # MA 02111-1307 USA |
| # |
| |
| VERSION = 2011 |
| PATCHLEVEL = 06 |
| SUBLEVEL = |
| EXTRAVERSION = |
| ifneq "$(SUBLEVEL)" "" |
| U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) |
| else |
| U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) |
| endif |
| TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h |
| VERSION_FILE = $(obj)include/version_autogenerated.h |
| |
| HOSTARCH := $(shell uname -m | \ |
| sed -e s/i.86/x86/ \ |
| -e s/sun4u/sparc64/ \ |
| -e s/arm.*/arm/ \ |
| -e s/sa110/arm/ \ |
| -e s/ppc64/powerpc/ \ |
| -e s/ppc/powerpc/ \ |
| -e s/macppc/powerpc/\ |
| -e s/sh.*/sh/) |
| |
| HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ |
| sed -e 's/\(cygwin\).*/cygwin/') |
| |
| # Set shell to bash if possible, otherwise fall back to sh |
| SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ |
| else if [ -x /bin/bash ]; then echo /bin/bash; \ |
| else echo sh; fi; fi) |
| |
| export HOSTARCH HOSTOS SHELL |
| |
| # Deal with colliding definitions from tcsh etc. |
| VENDOR= |
| |
| ######################################################################### |
| # Allow for silent builds |
| ifeq (,$(findstring s,$(MAKEFLAGS))) |
| XECHO = echo |
| else |
| XECHO = : |
| endif |
| |
| ######################################################################### |
| # |
| # U-boot build supports producing a object files to the separate external |
| # directory. Two use cases are supported: |
| # |
| # 1) Add O= to the make command line |
| # 'make O=/tmp/build all' |
| # |
| # 2) Set environement variable BUILD_DIR to point to the desired location |
| # 'export BUILD_DIR=/tmp/build' |
| # 'make' |
| # |
| # The second approach can also be used with a MAKEALL script |
| # 'export BUILD_DIR=/tmp/build' |
| # './MAKEALL' |
| # |
| # Command line 'O=' setting overrides BUILD_DIR environent variable. |
| # |
| # When none of the above methods is used the local build is performed and |
| # the object files are placed in the source directory. |
| # |
| |
| ifdef O |
| ifeq ("$(origin O)", "command line") |
| BUILD_DIR := $(O) |
| endif |
| endif |
| |
| ifneq ($(BUILD_DIR),) |
| saved-output := $(BUILD_DIR) |
| |
| # Attempt to create a output directory. |
| $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) |
| |
| # Verify if it was successful. |
| BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) |
| $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) |
| endif # ifneq ($(BUILD_DIR),) |
| |
| OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) |
| SPLTREE := $(OBJTREE)/spl |
| SRCTREE := $(CURDIR) |
| TOPDIR := $(SRCTREE) |
| LNDIR := $(OBJTREE) |
| export TOPDIR SRCTREE OBJTREE SPLTREE |
| |
| MKCONFIG := $(SRCTREE)/mkconfig |
| export MKCONFIG |
| |
| ifneq ($(OBJTREE),$(SRCTREE)) |
| REMOTE_BUILD := 1 |
| export REMOTE_BUILD |
| endif |
| |
| # $(obj) and (src) are defined in config.mk but here in main Makefile |
| # we also need them before config.mk is included which is the case for |
| # some targets like unconfig, clean, clobber, distclean, etc. |
| ifneq ($(OBJTREE),$(SRCTREE)) |
| obj := $(OBJTREE)/ |
| src := $(SRCTREE)/ |
| else |
| obj := |
| src := |
| endif |
| export obj src |
| |
| # Make sure CDPATH settings don't interfere |
| unexport CDPATH |
| |
| ######################################################################### |
| |
| # The "tools" are needed early, so put this first |
| # Don't include stuff already done in $(LIBS) |
| SUBDIRS = tools \ |
| examples/standalone \ |
| examples/api |
| |
| .PHONY : $(SUBDIRS) $(VERSION_FILE) |
| |
| ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) |
| |
| # Include autoconf.mk before config.mk so that the config options are available |
| # to all top level build files. We need the dummy all: target to prevent the |
| # dependency target in autoconf.mk.dep from being the default. |
| all: |
| sinclude $(obj)include/autoconf.mk.dep |
| sinclude $(obj)include/autoconf.mk |
| |
| # load ARCH, BOARD, and CPU configuration |
| include $(obj)include/config.mk |
| export ARCH CPU BOARD VENDOR SOC |
| |
| # set default to nothing for native builds |
| ifeq ($(HOSTARCH),$(ARCH)) |
| CROSS_COMPILE ?= |
| endif |
| |
| # load other configuration |
| include $(TOPDIR)/config.mk |
| |
| # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use |
| # that (or fail if absent). Otherwise, search for a linker script in a |
| # standard location. |
| |
| ifndef LDSCRIPT |
| #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug |
| ifdef CONFIG_SYS_LDSCRIPT |
| # need to strip off double quotes |
| LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) |
| endif |
| endif |
| |
| ifndef LDSCRIPT |
| ifeq ($(CONFIG_NAND_U_BOOT),y) |
| LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds |
| ifeq ($(wildcard $(LDSCRIPT)),) |
| LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds |
| endif |
| endif |
| ifeq ($(wildcard $(LDSCRIPT)),) |
| LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds |
| endif |
| ifeq ($(wildcard $(LDSCRIPT)),) |
| LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds |
| endif |
| ifeq ($(wildcard $(LDSCRIPT)),) |
| $(error could not find linker script) |
| endif |
| endif |
| |
| ######################################################################### |
| # U-Boot objects....order is important (i.e. start must be first) |
| |
| OBJS = $(CPUDIR)/start.o |
| ifeq ($(CPU),x86) |
| OBJS += $(CPUDIR)/start16.o |
| OBJS += $(CPUDIR)/resetvec.o |
| endif |
| ifeq ($(CPU),ppc4xx) |
| OBJS += $(CPUDIR)/resetvec.o |
| endif |
| ifeq ($(CPU),mpc85xx) |
| OBJS += $(CPUDIR)/resetvec.o |
| endif |
| |
| OBJS := $(addprefix $(obj),$(OBJS)) |
| |
| LIBS = lib/libgeneric.o |
| LIBS += lib/lzma/liblzma.o |
| LIBS += lib/lzo/liblzo.o |
| LIBS += lib/zlib/libz.o |
| LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ |
| "board/$(VENDOR)/common/lib$(VENDOR).o"; fi) |
| LIBS += $(CPUDIR)/lib$(CPU).o |
| ifdef SOC |
| LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o |
| endif |
| ifeq ($(CPU),ixp) |
| LIBS += arch/arm/cpu/ixp/npe/libnpe.o |
| endif |
| LIBS += arch/$(ARCH)/lib/lib$(ARCH).o |
| LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \ |
| fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \ |
| fs/ubifs/libubifs.o |
| LIBS += net/libnet.o |
| LIBS += disk/libdisk.o |
| LIBS += drivers/bios_emulator/libatibiosemu.o |
| LIBS += drivers/block/libblock.o |
| LIBS += drivers/dma/libdma.o |
| LIBS += drivers/fpga/libfpga.o |
| LIBS += drivers/gpio/libgpio.o |
| LIBS += drivers/hwmon/libhwmon.o |
| LIBS += drivers/i2c/libi2c.o |
| LIBS += drivers/input/libinput.o |
| LIBS += drivers/misc/libmisc.o |
| LIBS += drivers/mmc/libmmc.o |
| LIBS += drivers/mtd/libmtd.o |
| LIBS += drivers/mtd/nand/libnand.o |
| LIBS += drivers/mtd/onenand/libonenand.o |
| LIBS += drivers/mtd/ubi/libubi.o |
| LIBS += drivers/mtd/spi/libspi_flash.o |
| LIBS += drivers/net/libnet.o |
| LIBS += drivers/net/phy/libphy.o |
| LIBS += drivers/pci/libpci.o |
| LIBS += drivers/pcmcia/libpcmcia.o |
| LIBS += drivers/power/libpower.o |
| LIBS += drivers/spi/libspi.o |
| ifeq ($(CPU),mpc83xx) |
| LIBS += drivers/qe/libqe.o |
| LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o |
| endif |
| ifeq ($(CPU),mpc85xx) |
| LIBS += drivers/qe/libqe.o |
| LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o |
| LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o |
| endif |
| ifeq ($(CPU),mpc86xx) |
| LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o |
| LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o |
| endif |
| LIBS += drivers/rtc/librtc.o |
| LIBS += drivers/serial/libserial.o |
| LIBS += drivers/twserial/libtws.o |
| LIBS += drivers/usb/eth/libusb_eth.o |
| LIBS += drivers/usb/gadget/libusb_gadget.o |
| LIBS += drivers/usb/host/libusb_host.o |
| LIBS += drivers/usb/musb/libusb_musb.o |
| LIBS += drivers/usb/phy/libusb_phy.o |
| LIBS += drivers/video/libvideo.o |
| LIBS += drivers/watchdog/libwatchdog.o |
| LIBS += common/libcommon.o |
| LIBS += lib/libfdt/libfdt.o |
| LIBS += api/libapi.o |
| LIBS += post/libpost.o |
| |
| ifeq ($(SOC),omap3) |
| LIBS += $(CPUDIR)/omap-common/libomap-common.o |
| endif |
| ifeq ($(SOC),omap4) |
| LIBS += $(CPUDIR)/omap-common/libomap-common.o |
| endif |
| |
| ifeq ($(SOC),s5pc1xx) |
| LIBS += $(CPUDIR)/s5p-common/libs5p-common.o |
| endif |
| ifeq ($(SOC),s5pc2xx) |
| LIBS += $(CPUDIR)/s5p-common/libs5p-common.o |
| endif |
| |
| LIBS := $(addprefix $(obj),$(sort $(LIBS))) |
| .PHONY : $(LIBS) $(TIMESTAMP_FILE) |
| |
| LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o |
| LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) |
| |
| # Add GCC lib |
| ifdef USE_PRIVATE_LIBGCC |
| ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") |
| PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o |
| else |
| PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc |
| endif |
| else |
| PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc |
| endif |
| PLATFORM_LIBS += $(PLATFORM_LIBGCC) |
| export PLATFORM_LIBS |
| |
| # Special flags for CPP when processing the linker script. |
| # Pass the version down so we can handle backwards compatibility |
| # on the fly. |
| LDPPFLAGS += \ |
| -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ |
| $(shell $(LD) --version | \ |
| sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') |
| |
| __OBJS := $(subst $(obj),,$(OBJS)) |
| __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) |
| |
| ######################################################################### |
| ######################################################################### |
| |
| ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) |
| BOARD_SIZE_CHECK = \ |
| @actual=`wc -c $@ | awk '{print $$1}'`; \ |
| limit=$(CONFIG_BOARD_SIZE_LIMIT); \ |
| if test $$actual -gt $$limit; then \ |
| echo "$@ exceeds file size limit:"; \ |
| echo " limit: $$limit bytes"; \ |
| echo " actual: $$actual bytes"; \ |
| echo " excess: $$((actual - limit)) bytes"; \ |
| exit 1; \ |
| fi |
| else |
| BOARD_SIZE_CHECK = |
| endif |
| |
| # Always append ALL so that arch config.mk's can add custom ones |
| ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map |
| |
| ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin |
| ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin |
| ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin |
| ALL-$(CONFIG_MMC_U_BOOT) += $(obj)mmc_spl/u-boot-mmc-spl.bin |
| ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin |
| |
| all: $(ALL-y) |
| |
| $(obj)u-boot.hex: $(obj)u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ |
| |
| $(obj)u-boot.srec: $(obj)u-boot |
| $(OBJCOPY) -O srec $< $@ |
| |
| $(obj)u-boot.bin: $(obj)u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ |
| $(BOARD_SIZE_CHECK) |
| |
| $(obj)u-boot.ldr: $(obj)u-boot |
| $(CREATE_LDR_ENV) |
| $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) |
| $(BOARD_SIZE_CHECK) |
| |
| $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr |
| $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary |
| |
| $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr |
| $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary |
| |
| $(obj)u-boot.img: $(obj)u-boot.bin |
| $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ |
| -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \ |
| -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ |
| sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ |
| -d $< $@ |
| |
| $(obj)u-boot.imx: $(obj)u-boot.bin |
| $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \ |
| -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ |
| |
| $(obj)u-boot.kwb: $(obj)u-boot.bin |
| $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ |
| -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ |
| |
| $(obj)u-boot.sha1: $(obj)u-boot.bin |
| $(obj)tools/ubsha1 $(obj)u-boot.bin |
| |
| $(obj)u-boot.dis: $(obj)u-boot |
| $(OBJDUMP) -d $< > $@ |
| |
| $(obj)u-boot.ubl: $(obj)u-boot-nand.bin |
| $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \ |
| -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ |
| |
| GEN_UBOOT = \ |
| UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ |
| sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ |
| cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \ |
| --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ |
| -Map u-boot.map -o u-boot |
| $(obj)u-boot: depend \ |
| $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds |
| $(GEN_UBOOT) |
| ifeq ($(CONFIG_KALLSYMS),y) |
| smap=`$(call SYSTEM_MAP,u-boot) | \ |
| awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ |
| $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ |
| -c common/system_map.c -o $(obj)common/system_map.o |
| $(GEN_UBOOT) $(obj)common/system_map.o |
| endif |
| |
| $(OBJS): depend |
| $(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@)) |
| |
| $(LIBS): depend $(SUBDIRS) |
| $(MAKE) -C $(dir $(subst $(obj),,$@)) |
| |
| $(LIBBOARD): depend $(LIBS) |
| $(MAKE) -C $(dir $(subst $(obj),,$@)) |
| |
| $(SUBDIRS): depend |
| $(MAKE) -C $@ all |
| |
| $(LDSCRIPT): depend |
| $(MAKE) -C $(dir $@) $(notdir $@) |
| |
| $(obj)u-boot.lds: $(LDSCRIPT) |
| $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ |
| |
| nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend |
| $(MAKE) -C nand_spl/board/$(BOARDDIR) all |
| |
| $(obj)u-boot-nand.bin: nand_spl $(obj)u-boot.bin |
| cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin |
| |
| onenand_ipl: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk |
| $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all |
| |
| $(obj)u-boot-onenand.bin: onenand_ipl $(obj)u-boot.bin |
| cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin |
| |
| mmc_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend |
| $(MAKE) -C mmc_spl/board/$(BOARDDIR) all |
| |
| $(obj)mmc_spl/u-boot-mmc-spl.bin: mmc_spl |
| |
| $(obj)spl/u-boot-spl.bin: depend |
| $(MAKE) -C spl all |
| |
| $(TIMESTAMP_FILE): |
| @LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ |
| @LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@ |
| |
| updater: |
| $(MAKE) -C tools/updater all |
| |
| # Explicitly make _depend in subdirs containing multiple targets to prevent |
| # parallel sub-makes creating .depend files simultaneously. |
| depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \ |
| $(obj)include/autoconf.mk \ |
| $(obj)include/generated/generic-asm-offsets.h |
| for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \ |
| $(MAKE) -C $$dir _depend ; done |
| |
| TAG_SUBDIRS = $(SUBDIRS) |
| TAG_SUBDIRS += $(dir $(__LIBS)) |
| TAG_SUBDIRS += include |
| |
| FIND := find |
| FINDFLAGS := -L |
| |
| tags ctags: |
| ctags -w -o $(obj)ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ |
| -name '*.[chS]' -print` |
| |
| etags: |
| etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ |
| -name '*.[chS]' -print` |
| cscope: |
| $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ |
| cscope.files |
| cscope -b -q -k |
| |
| SYSTEM_MAP = \ |
| $(NM) $1 | \ |
| grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ |
| LC_ALL=C sort |
| $(obj)System.map: $(obj)u-boot |
| @$(call SYSTEM_MAP,$<) > $(obj)System.map |
| |
| # |
| # Auto-generate the autoconf.mk file (which is included by all makefiles) |
| # |
| # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. |
| # the dep file is only include in this top level makefile to determine when |
| # to regenerate the autoconf.mk file. |
| $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h |
| @$(XECHO) Generating $@ ; \ |
| set -e ; \ |
| : Generate the dependancies ; \ |
| $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \ |
| -MQ $(obj)include/autoconf.mk include/common.h > $@ |
| |
| $(obj)include/autoconf.mk: $(obj)include/config.h |
| @$(XECHO) Generating $@ ; \ |
| set -e ; \ |
| : Extract the config macros ; \ |
| $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ |
| sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ |
| mv $@.tmp $@ |
| |
| $(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \ |
| $(obj)lib/asm-offsets.s |
| @$(XECHO) Generating $@ |
| tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@ |
| |
| $(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \ |
| $(src)lib/asm-offsets.c |
| @mkdir -p $(obj)lib |
| $(CC) -DDO_DEPS_ONLY \ |
| $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \ |
| -o $@ $(src)lib/asm-offsets.c -c -S |
| |
| ######################################################################### |
| else # !config.mk |
| all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ |
| $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ |
| $(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) \ |
| updater depend dep tags ctags etags cscope $(obj)System.map: |
| @echo "System not configured - see README" >&2 |
| @ exit 1 |
| |
| tools: $(VERSION_FILE) |
| $(MAKE) -C $@ all |
| endif # config.mk |
| |
| $(VERSION_FILE): |
| @mkdir -p $(dir $(VERSION_FILE)) |
| @( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \ |
| printf '#define PLAIN_VERSION "%s%s"\n' \ |
| "$(U_BOOT_VERSION)" "$${localvers}" ; \ |
| printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \ |
| "$(U_BOOT_VERSION)" "$${localvers}" ; \ |
| ) > $@.tmp |
| @( printf '#define CC_VERSION_STRING "%s"\n' \ |
| '$(shell $(CC) --version | head -n 1)' )>> $@.tmp |
| @( printf '#define LD_VERSION_STRING "%s"\n' \ |
| '$(shell $(LD) -v | head -n 1)' )>> $@.tmp |
| @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ |
| |
| easylogo env gdb: |
| $(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION} |
| gdbtools: gdb |
| |
| tools-all: easylogo env gdb $(VERSION_FILE) |
| $(MAKE) -C tools HOST_TOOLS_ALL=y |
| |
| .PHONY : CHANGELOG |
| CHANGELOG: |
| git log --no-merges U-Boot-1_1_5.. | \ |
| unexpand -a | sed -e 's/\s\s*$$//' > $@ |
| |
| include/license.h: tools/bin2header COPYING |
| cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h |
| ######################################################################### |
| |
| unconfig: |
| @rm -f $(obj)include/config.h $(obj)include/config.mk \ |
| $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ |
| $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep |
| |
| %_config:: unconfig |
| @$(MKCONFIG) -A $(@:_config=) |
| |
| sinclude $(obj).boards.depend |
| $(obj).boards.depend: boards.cfg |
| awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@ |
| |
| # |
| # Functions to generate common board directory names |
| # |
| lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') |
| ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') |
| |
| ######################################################################### |
| ## Coldfire |
| ######################################################################### |
| |
| astro_mcf5373l_config \ |
| astro_mcf5373l_RAM_config : unconfig |
| @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro |
| |
| M52277EVB_config \ |
| M52277EVB_spansion_config \ |
| M52277EVB_stmicro_config : unconfig |
| @case "$@" in \ |
| M52277EVB_config) FLASH=SPANSION;; \ |
| M52277EVB_spansion_config) FLASH=SPANSION;; \ |
| M52277EVB_stmicro_config) FLASH=STMICRO;; \ |
| esac; \ |
| if [ "$${FLASH}" = "SPANSION" ] ; then \ |
| echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ |
| echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ |
| cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ |
| cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale |
| |
| M5235EVB_config \ |
| M5235EVB_Flash16_config \ |
| M5235EVB_Flash32_config: unconfig |
| @case "$@" in \ |
| M5235EVB_config) FLASH=16;; \ |
| M5235EVB_Flash16_config) FLASH=16;; \ |
| M5235EVB_Flash32_config) FLASH=32;; \ |
| esac; \ |
| if [ "$${FLASH}" != "16" ] ; then \ |
| echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ |
| echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ |
| cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ |
| else \ |
| echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ |
| cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale |
| |
| cobra5272_config : unconfig |
| @$(MKCONFIG) $@ m68k mcf52x2 cobra5272 |
| |
| EB+MCF-EV123_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/BuS/EB+MCF-EV123 |
| @echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk |
| @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS |
| |
| EB+MCF-EV123_internal_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/BuS/EB+MCF-EV123 |
| @echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk |
| @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS |
| |
| M5329AFEE_config \ |
| M5329BFEE_config : unconfig |
| @case "$@" in \ |
| M5329AFEE_config) NAND=0;; \ |
| M5329BFEE_config) NAND=16;; \ |
| esac; \ |
| if [ "$${NAND}" != "0" ] ; then \ |
| echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale |
| |
| M5373EVB_config : unconfig |
| @case "$@" in \ |
| M5373EVB_config) NAND=16;; \ |
| esac; \ |
| if [ "$${NAND}" != "0" ] ; then \ |
| echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale |
| |
| M54451EVB_config \ |
| M54451EVB_stmicro_config : unconfig |
| @case "$@" in \ |
| M54451EVB_config) FLASH=NOR;; \ |
| M54451EVB_stmicro_config) FLASH=STMICRO;; \ |
| esac; \ |
| if [ "$${FLASH}" = "NOR" ] ; then \ |
| echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ |
| fi; \ |
| echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; |
| @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale |
| |
| M54455EVB_config \ |
| M54455EVB_atmel_config \ |
| M54455EVB_intel_config \ |
| M54455EVB_a33_config \ |
| M54455EVB_a66_config \ |
| M54455EVB_i33_config \ |
| M54455EVB_i66_config \ |
| M54455EVB_stm33_config : unconfig |
| @case "$@" in \ |
| M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ |
| M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ |
| M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ |
| M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ |
| M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ |
| esac; \ |
| if [ "$${FLASH}" = "INTEL" ] ; then \ |
| echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ |
| echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| fi; \ |
| if [ "$${FLASH}" = "ATMEL" ] ; then \ |
| echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ |
| echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| fi; \ |
| echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ |
| @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale |
| |
| M5475AFE_config \ |
| M5475BFE_config \ |
| M5475CFE_config \ |
| M5475DFE_config \ |
| M5475EFE_config \ |
| M5475FFE_config \ |
| M5475GFE_config : unconfig |
| @case "$@" in \ |
| M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ |
| M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ |
| M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| esac; \ |
| echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ |
| if [ "$${RAM1}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${CODE}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${VID}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${USB}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale |
| |
| M5485AFE_config \ |
| M5485BFE_config \ |
| M5485CFE_config \ |
| M5485DFE_config \ |
| M5485EFE_config \ |
| M5485FFE_config \ |
| M5485GFE_config \ |
| M5485HFE_config : unconfig |
| @case "$@" in \ |
| M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ |
| M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ |
| M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ |
| esac; \ |
| echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ |
| if [ "$${RAM1}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${CODE}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${VID}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${USB}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale |
| |
| #======================================================================== |
| # ARM |
| #======================================================================== |
| |
| ######################################################################### |
| ## ARM926EJ-S Systems |
| ######################################################################### |
| |
| at91sam9m10g45ek_nandflash_config \ |
| at91sam9m10g45ek_dataflash_config \ |
| at91sam9m10g45ek_dataflash_cs0_config \ |
| at91sam9m10g45ek_config \ |
| at91sam9g45ekes_nandflash_config \ |
| at91sam9g45ekes_dataflash_config \ |
| at91sam9g45ekes_dataflash_cs0_config \ |
| at91sam9g45ekes_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring 9m10,$@)" ] ; then \ |
| echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ |
| fi; |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 |
| |
| pm9g45_config : unconfig |
| @mkdir -p $(obj)include |
| @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91 |
| |
| TNY_A9G20_NANDFLASH_config \ |
| TNY_A9G20_EEPROM_config \ |
| TNY_A9G20_config \ |
| TNY_A9260_NANDFLASH_config \ |
| TNY_A9260_EEPROM_config \ |
| TNY_A9260_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91 |
| |
| ######################################################################## |
| ## ARM Integrator boards - see doc/README-integrator for more info. |
| integratorap_config \ |
| ap_config \ |
| ap966_config \ |
| ap922_config \ |
| ap922_XA10_config \ |
| ap7_config \ |
| ap720t_config \ |
| ap920t_config \ |
| ap926ejs_config \ |
| ap946es_config: unconfig |
| @board/armltd/integrator/split_by_variant.sh ap $@ |
| |
| integratorcp_config \ |
| cp_config \ |
| cp920t_config \ |
| cp926ejs_config \ |
| cp946es_config \ |
| cp1136_config \ |
| cp966_config \ |
| cp922_config \ |
| cp922_XA10_config \ |
| cp1026_config: unconfig |
| @board/armltd/integrator/split_by_variant.sh cp $@ |
| |
| xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) |
| |
| omap1610inn_config \ |
| omap1610inn_cs0boot_config \ |
| omap1610inn_cs3boot_config \ |
| omap1610inn_cs_autoboot_config \ |
| omap1610h2_config \ |
| omap1610h2_cs0boot_config \ |
| omap1610h2_cs3boot_config \ |
| omap1610h2_cs_autoboot_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ |
| elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap |
| |
| omap730p2_config \ |
| omap730p2_cs0boot_config \ |
| omap730p2_cs3boot_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap |
| |
| spear300_config \ |
| spear310_config \ |
| spear320_config : unconfig |
| @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear |
| |
| spear600_config : unconfig |
| @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear |
| |
| SX1_stdout_serial_config \ |
| SX1_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ |
| echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 |
| |
| tx25_config : unconfig |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 |
| |
| edb9301_config \ |
| edb9302_config \ |
| edb9302a_config \ |
| edb9307_config \ |
| edb9307a_config \ |
| edb9312_config \ |
| edb9315_config \ |
| edb9315a_config: unconfig |
| @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx |
| |
| ######################################################################### |
| ## XScale Systems |
| ######################################################################### |
| |
| pdnb3_config \ |
| scpu_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring scpu_,$@)" ] ; then \ |
| echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive |
| |
| ######################################################################### |
| ## ARM1136 Systems |
| ######################################################################### |
| |
| apollon_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h |
| @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx |
| |
| imx31_phycore_eet_config \ |
| imx31_phycore_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ -n "$(findstring _eet_,$@)" ]; then \ |
| echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ |
| fi |
| @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31 |
| |
| mx31pdk_config \ |
| mx31pdk_nand_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ -n "$(findstring _nand_,$@)" ]; then \ |
| echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ |
| else \ |
| echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ |
| fi |
| @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 |
| |
| ######################################################################### |
| ## ARM1176 Systems |
| ######################################################################### |
| smdk6400_noUSB_config \ |
| smdk6400_config : unconfig |
| @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 |
| @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ |
| echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ |
| else \ |
| echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ |
| fi |
| @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| ######################################################################### |
| ######################################################################### |
| |
| clean: |
| @rm -f $(obj)examples/standalone/82559_eeprom \ |
| $(obj)examples/standalone/atmel_df_pow2 \ |
| $(obj)examples/standalone/eepro100_eeprom \ |
| $(obj)examples/standalone/hello_world \ |
| $(obj)examples/standalone/interrupt \ |
| $(obj)examples/standalone/mem_to_mem_idma2intr \ |
| $(obj)examples/standalone/sched \ |
| $(obj)examples/standalone/smc911{11,x}_eeprom \ |
| $(obj)examples/standalone/test_burst \ |
| $(obj)examples/standalone/timer |
| @rm -f $(obj)examples/api/demo{,.bin} |
| @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ |
| $(obj)tools/env/{fw_printenv,fw_setenv} \ |
| $(obj)tools/envcrc \ |
| $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ |
| $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ |
| $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ |
| $(obj)tools/ncb $(obj)tools/ubsha1 |
| @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ |
| $(obj)board/matrix_vision/*/bootscript.img \ |
| $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ |
| $(obj)board/voiceblue/eeprom \ |
| $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ |
| $(obj)u-boot.lds \ |
| $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \ |
| $(obj)arch/blackfin/cpu/init.{lds,elf} |
| @rm -f $(obj)include/bmp_logo.h |
| @rm -f $(obj)lib/asm-offsets.s |
| @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map} |
| @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map} |
| @rm -f $(obj)mmc_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,u-boot-spl.bin,u-boot-mmc-spl.bin} |
| @rm -f $(ONENAND_BIN) |
| @rm -f $(obj)onenand_ipl/u-boot.lds |
| @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map} |
| @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) |
| @find $(OBJTREE) -type f \ |
| \( -name 'core' -o -name '*.bak' -o -name '*~' \ |
| -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ |
| | xargs rm -f |
| |
| clobber: clean |
| @find $(OBJTREE) -type f \( -name '*.depend' \ |
| -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ |
| -print0 \ |
| | xargs -0 rm -f |
| @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ |
| $(obj)cscope.* $(obj)*.*~ |
| @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y) |
| @rm -f $(obj)u-boot.kwb |
| @rm -f $(obj)u-boot.imx |
| @rm -f $(obj)u-boot.ubl |
| @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} |
| @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c |
| @rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm |
| @rm -fr $(obj)include/generated |
| @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f |
| @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f |
| @[ ! -d $(obj)mmc_spl ] || find $(obj)mmc_spl -name "*" -type l -print | xargs rm -f |
| |
| mrproper \ |
| distclean: clobber unconfig |
| ifneq ($(OBJTREE),$(SRCTREE)) |
| rm -rf $(obj)* |
| endif |
| |
| backup: |
| F=`basename $(TOPDIR)` ; cd .. ; \ |
| gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F |
| |
| ######################################################################### |