| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2016-2018 ARM Ltd. |
| * Author: Liviu Dudau <liviu.dudau@foss.arm.com> |
| * |
| */ |
| #define DEBUG |
| #include <common.h> |
| #include <video.h> |
| #include <dm.h> |
| #ifdef CONFIG_DISPLAY |
| #include <display.h> |
| #endif |
| #include <fdtdec.h> |
| #include <asm/io.h> |
| #include <os.h> |
| #include <fdt_support.h> |
| #include <clk.h> |
| #include <linux/sizes.h> |
| |
| #define MALIDP_CORE_ID 0x0018 |
| #define MALIDP_REG_BG_COLOR 0x0044 |
| #define MALIDP_LAYER_LV1 0x0100 |
| #define MALIDP_DC_STATUS 0xc000 |
| #define MALIDP_DC_CONTROL 0xc010 |
| #define MALIDP_DC_CFG_VALID 0xc014 |
| |
| /* offsets inside the modesetting register block */ |
| #define MALIDP_H_INTERVALS 0x0000 |
| #define MALIDP_V_INTERVALS 0x0004 |
| #define MALIDP_SYNC_CONTROL 0x0008 |
| #define MALIDP_HV_ACTIVESIZE 0x000c |
| #define MALIDP_OUTPUT_DEPTH 0x001c |
| |
| /* offsets inside the layer register block */ |
| #define MALIDP_LAYER_FORMAT 0x0000 |
| #define MALIDP_LAYER_CONTROL 0x0004 |
| #define MALIDP_LAYER_IN_SIZE 0x000c |
| #define MALIDP_LAYER_CMP_SIZE 0x0010 |
| #define MALIDP_LAYER_STRIDE 0x0018 |
| #define MALIDP_LAYER_PTR_LOW 0x0024 |
| #define MALIDP_LAYER_PTR_HIGH 0x0028 |
| |
| /* offsets inside the IRQ control blocks */ |
| #define MALIDP_REG_MASKIRQ 0x0008 |
| #define MALIDP_REG_CLEARIRQ 0x000c |
| |
| #define M1BITS 0x0001 |
| #define M2BITS 0x0003 |
| #define M4BITS 0x000f |
| #define M8BITS 0x00ff |
| #define M10BITS 0x03ff |
| #define M12BITS 0x0fff |
| #define M13BITS 0x1fff |
| #define M16BITS 0xffff |
| #define M17BITS 0x1ffff |
| |
| #define MALIDP_H_FRONTPORCH(x) (((x) & M12BITS) << 0) |
| #define MALIDP_H_BACKPORCH(x) (((x) & M10BITS) << 16) |
| #define MALIDP_V_FRONTPORCH(x) (((x) & M12BITS) << 0) |
| #define MALIDP_V_BACKPORCH(x) (((x) & M8BITS) << 16) |
| #define MALIDP_H_SYNCWIDTH(x) (((x) & M10BITS) << 0) |
| #define MALIDP_V_SYNCWIDTH(x) (((x) & M8BITS) << 16) |
| #define MALIDP_H_ACTIVE(x) (((x) & M13BITS) << 0) |
| #define MALIDP_V_ACTIVE(x) (((x) & M13BITS) << 16) |
| |
| #define MALIDP_CMP_V_SIZE(x) (((x) & M13BITS) << 16) |
| #define MALIDP_CMP_H_SIZE(x) (((x) & M13BITS) << 0) |
| |
| #define MALIDP_IN_V_SIZE(x) (((x) & M13BITS) << 16) |
| #define MALIDP_IN_H_SIZE(x) (((x) & M13BITS) << 0) |
| |
| #define MALIDP_DC_CM_CONTROL(x) ((x) & M1BITS) << 16, 1 << 16 |
| #define MALIDP_DC_STATUS_GET_CM(reg) (((reg) >> 16) & M1BITS) |
| |
| #define MALIDP_FORMAT_ARGB8888 0x08 |
| #define MALIDP_DEFAULT_BG_R 0x0 |
| #define MALIDP_DEFAULT_BG_G 0x0 |
| #define MALIDP_DEFAULT_BG_B 0x0 |
| |
| #define MALIDP_PRODUCT_ID(core_id) ((u32)(core_id) >> 16) |
| |
| #define MALIDP500 0x500 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct malidp_priv { |
| phys_addr_t base_addr; |
| phys_addr_t dc_status_addr; |
| phys_addr_t dc_control_addr; |
| phys_addr_t cval_addr; |
| struct udevice *display; /* display device attached */ |
| struct clk aclk; |
| struct clk pxlclk; |
| u16 modeset_regs_offset; |
| u8 config_bit_shift; |
| u8 clear_irq; /* offset for IRQ clear register */ |
| }; |
| |
| static const struct video_ops malidp_ops = { |
| }; |
| |
| static int malidp_get_hwid(phys_addr_t base_addr) |
| { |
| int hwid; |
| |
| /* |
| * reading from the old CORE_ID offset will always |
| * return 0x5000000 on DP500 |
| */ |
| hwid = readl(base_addr + MALIDP_CORE_ID); |
| if (MALIDP_PRODUCT_ID(hwid) == MALIDP500) |
| return hwid; |
| /* otherwise try the other gen CORE_ID offset */ |
| hwid = readl(base_addr + MALIDP_DC_STATUS + MALIDP_CORE_ID); |
| |
| return hwid; |
| } |
| |
| /* |
| * wait for config mode bit setup to be acted upon by the hardware |
| */ |
| static int malidp_wait_configdone(struct malidp_priv *malidp) |
| { |
| u32 status, tries = 300; |
| |
| while (tries--) { |
| status = readl(malidp->dc_status_addr); |
| if ((status >> malidp->config_bit_shift) & 1) |
| break; |
| udelay(500); |
| } |
| |
| if (!tries) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| /* |
| * signal the hardware to enter configuration mode |
| */ |
| static int malidp_enter_config(struct malidp_priv *malidp) |
| { |
| setbits_le32(malidp->dc_control_addr, 1 << malidp->config_bit_shift); |
| return malidp_wait_configdone(malidp); |
| } |
| |
| /* |
| * signal the hardware to exit configuration mode |
| */ |
| static int malidp_leave_config(struct malidp_priv *malidp) |
| { |
| clrbits_le32(malidp->dc_control_addr, 1 << malidp->config_bit_shift); |
| return malidp_wait_configdone(malidp); |
| } |
| |
| static void malidp_setup_timings(struct malidp_priv *malidp, |
| struct display_timing *timings) |
| { |
| u32 val = MALIDP_H_SYNCWIDTH(timings->hsync_len.typ) | |
| MALIDP_V_SYNCWIDTH(timings->vsync_len.typ); |
| writel(val, malidp->base_addr + malidp->modeset_regs_offset + |
| MALIDP_SYNC_CONTROL); |
| val = MALIDP_H_BACKPORCH(timings->hback_porch.typ) | |
| MALIDP_H_FRONTPORCH(timings->hfront_porch.typ); |
| writel(val, malidp->base_addr + malidp->modeset_regs_offset + |
| MALIDP_H_INTERVALS); |
| val = MALIDP_V_BACKPORCH(timings->vback_porch.typ) | |
| MALIDP_V_FRONTPORCH(timings->vfront_porch.typ); |
| writel(val, malidp->base_addr + malidp->modeset_regs_offset + |
| MALIDP_V_INTERVALS); |
| val = MALIDP_H_ACTIVE(timings->hactive.typ) | |
| MALIDP_V_ACTIVE(timings->vactive.typ); |
| writel(val, malidp->base_addr + malidp->modeset_regs_offset + |
| MALIDP_HV_ACTIVESIZE); |
| /* default output bit-depth per colour is 8 bits */ |
| writel(0x080808, malidp->base_addr + malidp->modeset_regs_offset + |
| MALIDP_OUTPUT_DEPTH); |
| } |
| |
| static int malidp_setup_mode(struct malidp_priv *malidp, |
| struct display_timing *timings) |
| { |
| int err; |
| |
| if (clk_set_rate(&malidp->pxlclk, timings->pixelclock.typ) == 0) |
| return -EIO; |
| |
| malidp_setup_timings(malidp, timings); |
| |
| err = display_enable(malidp->display, 8, timings); |
| if (err) |
| printf("display_enable failed with %d\n", err); |
| |
| return err; |
| } |
| |
| static void malidp_setup_layer(struct malidp_priv *malidp, |
| struct display_timing *timings, |
| u32 layer_offset, phys_addr_t fb_addr) |
| { |
| u32 val; |
| |
| /* setup the base layer's pixel format to A8R8G8B8 */ |
| writel(MALIDP_FORMAT_ARGB8888, malidp->base_addr + layer_offset + |
| MALIDP_LAYER_FORMAT); |
| /* setup layer composition size */ |
| val = MALIDP_CMP_V_SIZE(timings->vactive.typ) | |
| MALIDP_CMP_H_SIZE(timings->hactive.typ); |
| writel(val, malidp->base_addr + layer_offset + |
| MALIDP_LAYER_CMP_SIZE); |
| /* setup layer input size */ |
| val = MALIDP_IN_V_SIZE(timings->vactive.typ) | |
| MALIDP_IN_H_SIZE(timings->hactive.typ); |
| writel(val, malidp->base_addr + layer_offset + MALIDP_LAYER_IN_SIZE); |
| /* setup layer stride in bytes */ |
| writel(timings->hactive.typ << 2, malidp->base_addr + layer_offset + |
| MALIDP_LAYER_STRIDE); |
| /* set framebuffer address */ |
| writel(lower_32_bits(fb_addr), malidp->base_addr + layer_offset + |
| MALIDP_LAYER_PTR_LOW); |
| writel(upper_32_bits(fb_addr), malidp->base_addr + layer_offset + |
| MALIDP_LAYER_PTR_HIGH); |
| /* enable layer */ |
| setbits_le32(malidp->base_addr + layer_offset + |
| MALIDP_LAYER_CONTROL, 1); |
| } |
| |
| static void malidp_set_configvalid(struct malidp_priv *malidp) |
| { |
| setbits_le32(malidp->cval_addr, 1); |
| } |
| |
| static int malidp_update_timings_from_edid(struct udevice *dev, |
| struct display_timing *timings) |
| { |
| #ifdef CONFIG_DISPLAY |
| struct malidp_priv *priv = dev_get_priv(dev); |
| struct udevice *disp_dev; |
| int err; |
| |
| err = uclass_first_device(UCLASS_DISPLAY, &disp_dev); |
| if (err) |
| return err; |
| |
| priv->display = disp_dev; |
| |
| err = display_read_timing(disp_dev, timings); |
| if (err) |
| return err; |
| |
| #endif |
| return 0; |
| } |
| |
| static int malidp_probe(struct udevice *dev) |
| { |
| struct video_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev); |
| ofnode framebuffer = ofnode_find_subnode(dev_ofnode(dev), "framebuffer"); |
| struct malidp_priv *priv = dev_get_priv(dev); |
| struct display_timing timings; |
| phys_addr_t fb_base, fb_size; |
| const char *format; |
| u32 value; |
| int err; |
| |
| if (!ofnode_valid(framebuffer)) |
| return -EINVAL; |
| |
| err = clk_get_by_name(dev, "pxlclk", &priv->pxlclk); |
| if (err) { |
| dev_err(dev, "failed to get pixel clock\n"); |
| return err; |
| } |
| err = clk_get_by_name(dev, "aclk", &priv->aclk); |
| if (err) { |
| dev_err(dev, "failed to get AXI clock\n"); |
| goto fail_aclk; |
| } |
| |
| err = ofnode_decode_display_timing(dev_ofnode(dev), 1, &timings); |
| if (err) { |
| dev_err(dev, "failed to get any display timings\n"); |
| goto fail_timings; |
| } |
| |
| err = malidp_update_timings_from_edid(dev, &timings); |
| if (err) { |
| printf("malidp_update_timings_from_edid failed: %d\n", err); |
| goto fail_timings; |
| } |
| |
| fb_base = ofnode_get_addr_size(framebuffer, "reg", &fb_size); |
| if (fb_base != FDT_ADDR_T_NONE) { |
| uc_plat->base = fb_base; |
| uc_plat->size = fb_size; |
| } else { |
| printf("cannot get address size for framebuffer\n"); |
| } |
| |
| err = ofnode_read_u32(framebuffer, "width", &value); |
| if (err) |
| goto fail_timings; |
| uc_priv->xsize = (ushort)value; |
| |
| err = ofnode_read_u32(framebuffer, "height", &value); |
| if (err) |
| goto fail_timings; |
| uc_priv->ysize = (ushort)value; |
| |
| format = ofnode_read_string(framebuffer, "format"); |
| if (!format) { |
| err = -EINVAL; |
| goto fail_timings; |
| } else if (!strncmp(format, "a8r8g8b8", 8)) { |
| uc_priv->bpix = VIDEO_BPP32; |
| } |
| |
| uc_priv->rot = 0; |
| priv->base_addr = (phys_addr_t)dev_read_addr(dev); |
| |
| clk_enable(&priv->pxlclk); |
| clk_enable(&priv->aclk); |
| |
| value = malidp_get_hwid(priv->base_addr); |
| printf("Display: Arm Mali DP%3x r%dp%d\n", MALIDP_PRODUCT_ID(value), |
| (value >> 12) & 0xf, (value >> 8) & 0xf); |
| |
| if (MALIDP_PRODUCT_ID(value) == MALIDP500) { |
| /* DP500 is special */ |
| priv->modeset_regs_offset = 0x28; |
| priv->dc_status_addr = priv->base_addr; |
| priv->dc_control_addr = priv->base_addr + 0xc; |
| priv->cval_addr = priv->base_addr + 0xf00; |
| priv->config_bit_shift = 17; |
| priv->clear_irq = 0; |
| } else { |
| priv->modeset_regs_offset = 0x30; |
| priv->dc_status_addr = priv->base_addr + MALIDP_DC_STATUS; |
| priv->dc_control_addr = priv->base_addr + MALIDP_DC_CONTROL; |
| priv->cval_addr = priv->base_addr + MALIDP_DC_CFG_VALID; |
| priv->config_bit_shift = 16; |
| priv->clear_irq = MALIDP_REG_CLEARIRQ; |
| } |
| |
| /* enter config mode */ |
| err = malidp_enter_config(priv); |
| if (err) |
| return err; |
| |
| /* disable interrupts */ |
| writel(0, priv->dc_status_addr + MALIDP_REG_MASKIRQ); |
| writel(0xffffffff, priv->dc_status_addr + priv->clear_irq); |
| |
| err = malidp_setup_mode(priv, &timings); |
| if (err) |
| goto fail_timings; |
| |
| malidp_setup_layer(priv, &timings, MALIDP_LAYER_LV1, |
| (phys_addr_t)uc_plat->base); |
| |
| err = malidp_leave_config(priv); |
| if (err) |
| goto fail_timings; |
| |
| malidp_set_configvalid(priv); |
| |
| return 0; |
| |
| fail_timings: |
| clk_free(&priv->aclk); |
| fail_aclk: |
| clk_free(&priv->pxlclk); |
| |
| return err; |
| } |
| |
| static int malidp_bind(struct udevice *dev) |
| { |
| struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev); |
| |
| /* choose max possible size: 2K x 2K, XRGB888 framebuffer */ |
| uc_plat->size = 4 * 2048 * 2048; |
| |
| return 0; |
| } |
| |
| static const struct udevice_id malidp_ids[] = { |
| { .compatible = "arm,mali-dp500" }, |
| { .compatible = "arm,mali-dp550" }, |
| { .compatible = "arm,mali-dp650" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mali_dp) = { |
| .name = "mali_dp", |
| .id = UCLASS_VIDEO, |
| .of_match = malidp_ids, |
| .bind = malidp_bind, |
| .probe = malidp_probe, |
| .priv_auto_alloc_size = sizeof(struct malidp_priv), |
| .ops = &malidp_ops, |
| }; |