board/traverse/ten64/ten64.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Traverse Ten64 Family board
  * Copyright 2017-2018 NXP
  * Copyright 2019-2021 Traverse Technologies
  */
 #include <common.h>
 #include <dm/uclass.h>
 #include <env.h>
 #include <i2c.h>
 #include <init.h>
 #include <log.h>
 #include <malloc.h>
 #include <errno.h>
 #include <misc.h>
 #include <netdev.h>
 #include <fsl_ifc.h>
 #include <fsl_ddr.h>
 #include <fsl_sec.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
 #include <fdt_support.h>
 #include <linux/delay.h>
 #include <linux/libfdt.h>
 #include <fsl-mc/fsl_mc.h>
 #include <env_internal.h>
 #include <asm/arch-fsl-layerscape/soc.h>
 #include <asm/arch/ppa.h>
 #include <hwconfig.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
 #include <asm/arch-fsl-layerscape/fsl_icid.h>

 #include <fsl_immap.h>

 #include "../common/ten64-controller.h"

 #define I2C_RETIMER_ADDR		0x27

 DECLARE_GLOBAL_DATA_PTR;

 static int ten64_read_board_info(struct t64uc_board_info *);
 static void ten64_set_macaddrs_from_board_info(struct t64uc_board_info *);
 static void ten64_board_retimer_ds110df410_init(void);

 enum {
 	TEN64_BOARD_REV_A = 0xFF,
 	TEN64_BOARD_REV_B = 0xFE,
 	TEN64_BOARD_REV_C = 0xFD
 };

 #define RESV_MEM_IN_BANK(b)	(gd->arch.resv_ram >= base[b] && \
 				 gd->arch.resv_ram < base[b] + size[b])

 int board_early_init_f(void)
 {
 	fsl_lsch3_early_init_f();
 	return 0;
 }

 static u32 ten64_get_board_rev(void)
 {
 	struct ccsr_gur *dcfg = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 	u32 board_rev_in = in_le32(&dcfg->gpporcr1);
 	return board_rev_in;
 }

 int checkboard(void)
 {
 	enum boot_src src = get_boot_src();
 	char boardmodel[32];
 	struct t64uc_board_info boardinfo;
 	u32 board_rev = ten64_get_board_rev();

 	switch (board_rev) {
 	case TEN64_BOARD_REV_A:
 		snprintf(boardmodel, 32, "1064-0201A (Alpha)");
 		break;
 	case TEN64_BOARD_REV_B:
 		snprintf(boardmodel, 32, "1064-0201B (Beta)");
 		break;
 	case TEN64_BOARD_REV_C:
 		snprintf(boardmodel, 32, "1064-0201C");
 		break;
 	default:
 		snprintf(boardmodel, 32, "1064 Revision %X", (0xFF - board_rev));
 		break;
 	}

 	printf("Board: %s, boot from ", boardmodel);
 	if (src == BOOT_SOURCE_SD_MMC)
 		puts("SD card\n");
 	else if (src == BOOT_SOURCE_QSPI_NOR)
 		puts("QSPI\n");
 	else
 		printf("Unknown boot source %d\n", src);

 	puts("Controller: ");
 	if (CONFIG_IS_ENABLED(TEN64_CONTROLLER)) {
 		/* Driver not compatible with alpha/beta board MCU firmware */
 		if (board_rev <= TEN64_BOARD_REV_C) {
 			if (ten64_read_board_info(&boardinfo)) {
 				puts("ERROR: unable to communicate\n");
 			} else {
 				printf("firmware %d.%d.%d\n",
 				       boardinfo.fwversion_major,
 				       boardinfo.fwversion_minor,
 				       boardinfo.fwversion_patch);
 				ten64_set_macaddrs_from_board_info(&boardinfo);
 			}
 		} else {
 			puts("not supported on this board revision\n");
 		}
 	} else {
 		puts("driver not enabled (no MAC addresses or other information will be read)\n");
 	}

 	return 0;
 }

 int board_init(void)
 {
 	init_final_memctl_regs();

 	if (CONFIG_IS_ENABLED(FSL_CAAM))
 		sec_init();

 	return 0;
 }

 int fsl_initdram(void)
 {
 	gd->ram_size = tfa_get_dram_size();

 	if (!gd->ram_size)
 		gd->ram_size = fsl_ddr_sdram_size();

 	return 0;
 }

 void detail_board_ddr_info(void)
 {
 	puts("\nDDR    ");
 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
 	print_ddr_info(0);
 }

 void board_quiesce_devices(void)
 {
 	if (IS_ENABLED(CONFIG_FSL_MC_ENET))
 		fsl_mc_ldpaa_exit(gd->bd);
 }

 void fdt_fixup_board_enet(void *fdt)
 {
 	int offset;

 	offset = fdt_path_offset(fdt, "/fsl-mc");

 	if (offset < 0)
 		offset = fdt_path_offset(fdt, "/soc/fsl-mc");

 	if (offset < 0) {
 		printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
 		       __func__, offset);
 		return;
 	}

 	if (get_mc_boot_status() == 0 &&
 	    (is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0))
 		fdt_status_okay(fdt, offset);
 	else
 		fdt_status_fail(fdt, offset);
 }

 /* Called after SoC board_late_init in fsl-layerscape/soc.c */
 int fsl_board_late_init(void)
 {
 	ten64_board_retimer_ds110df410_init();
 	return 0;
 }

 int ft_board_setup(void *blob, struct bd_info *bd)
 {
 	int i;
 	u16 mc_memory_bank = 0;

 	u64 *base;
 	u64 *size;
 	u64 mc_memory_base = 0;
 	u64 mc_memory_size = 0;
 	u16 total_memory_banks;

 	debug("%s blob=0x%p\n", __func__, blob);

 	ft_cpu_setup(blob, bd);

 	fdt_fixup_mc_ddr(&mc_memory_base, &mc_memory_size);

 	if (mc_memory_base != 0)
 		mc_memory_bank++;

 	total_memory_banks = CONFIG_NR_DRAM_BANKS + mc_memory_bank;

 	base = calloc(total_memory_banks, sizeof(u64));
 	size = calloc(total_memory_banks, sizeof(u64));

 	/* fixup DT for the two GPP DDR banks */
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		base[i] = gd->bd->bi_dram[i].start;
 		size[i] = gd->bd->bi_dram[i].size;
 		/* reduce size if reserved memory is within this bank */
 		if (CONFIG_IS_ENABLED(RESV_RAM) && RESV_MEM_IN_BANK(i))
 			size[i] = gd->arch.resv_ram - base[i];
 	}

 	if (mc_memory_base != 0) {
 		for (i = 0; i <= total_memory_banks; i++) {
 			if (base[i] == 0 && size[i] == 0) {
 				base[i] = mc_memory_base;
 				size[i] = mc_memory_size;
 				break;
 			}
 		}
 	}

 	fdt_fixup_memory_banks(blob, base, size, total_memory_banks);

 	fdt_fsl_mc_fixup_iommu_map_entry(blob);

 	if (CONFIG_IS_ENABLED(FSL_MC_ENET))
 		fdt_fixup_board_enet(blob);

 	fdt_fixup_icid(blob);

 	return 0;
 }

 #define MACADDRBITS(a, b) (u8)(((a) >> (b)) & 0xFF)

 /** Probe and return a udevice for the Ten64 board microcontroller.
  * Optionally, return the I2C bus the microcontroller resides on
  * @i2c_bus_out: return I2C bus device handle in this pointer
  */
 static int ten64_get_micro_udevice(struct udevice **ucdev, struct udevice **i2c_bus_out)
 {
 	int ret;
 	struct udevice *i2cbus;

 	ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &i2cbus);
 	if (ret) {
 		printf("%s: Could not get I2C UCLASS", __func__);
 		return ret;
 	}
 	if (i2c_bus_out)
 		*i2c_bus_out = i2cbus;

 	ret = dm_i2c_probe(i2cbus, 0x7E, DM_I2C_CHIP_RD_ADDRESS, ucdev);
 	if (ret) {
 		printf("%s: Could not get microcontroller device\n", __func__);
 		return ret;
 	}
 	return ret;
 }

 static int ten64_read_board_info(struct t64uc_board_info *boardinfo)
 {
 	struct udevice *ucdev;
 	int ret;

 	ret = ten64_get_micro_udevice(&ucdev, NULL);
 	if (ret)
 		return ret;

 	ret = misc_call(ucdev, TEN64_CNTRL_GET_BOARD_INFO, NULL, 0, (void *)boardinfo, 0);
 	if (ret)
 		return ret;

 	return 0;
 }

 static void ten64_set_macaddrs_from_board_info(struct t64uc_board_info *boardinfo)
 {
 	char ethaddr[18];
 	char enetvar[10];
 	u8 intfidx, this_dpmac_num;
 	u64 macaddr = 0;
 	/* We will copy the MAC address returned from the
 	 * uC (48 bits) into the u64 macaddr
 	 */
 	u8 *macaddr_bytes = (u8 *)&macaddr + 2;

 	/** MAC addresses are allocated in order of the physical port numbers,
 	 * DPMAC7->10 is "eth0" through "eth3"
 	 * DPMAC3->6 is "eth4" through "eth7"
 	 * DPMAC2 and 1 are "eth8" and "eth9" respectively
 	 */
 	int allocation_order[10] = {7, 8, 9, 10, 3, 4, 5, 6, 2, 1};

 	memcpy(macaddr_bytes, boardinfo->mac, 6);
 	/* MAC address bytes from uC are in big endian,
 	 * convert to CPU
 	 */
 	macaddr = __be64_to_cpu(macaddr);

 	for (intfidx = 0; intfidx < 10; intfidx++) {
 		snprintf(ethaddr, 18, "%02X:%02X:%02X:%02X:%02X:%02X",
 			 MACADDRBITS(macaddr, 40),
 			 MACADDRBITS(macaddr, 32),
 			 MACADDRBITS(macaddr, 24),
 			 MACADDRBITS(macaddr, 16),
 			 MACADDRBITS(macaddr, 8),
 			 MACADDRBITS(macaddr, 0));

 		this_dpmac_num = allocation_order[intfidx];
 		printf("DPMAC%d: %s\n", this_dpmac_num, ethaddr);
 		snprintf(enetvar, 10,
 			 (this_dpmac_num != 1) ? "eth%daddr" : "ethaddr",
 			 this_dpmac_num - 1);
 		macaddr++;

 		if (!env_get(enetvar))
 			env_set(enetvar, ethaddr);
 	}
 }

 /* The retimer (DS110DF410) is one of the devices without
  * a RESET line, but a power switch is on the board
  * allowing it to be reset via uC command
  */
 static int board_cycle_retimer(struct udevice **retim_dev)
 {
 	int ret;
 	u8 loop;
 	struct udevice *uc_dev;
 	struct udevice *i2cbus;

 	ret = ten64_get_micro_udevice(&uc_dev, &i2cbus);
 	if (ret)
 		return ret;

 	ret = dm_i2c_probe(i2cbus, I2C_RETIMER_ADDR, 0, retim_dev);
 	if (ret == 0) {
 		puts("(retimer on, resetting...) ");

 		ret = misc_call(uc_dev, TEN64_CNTRL_10G_OFF, NULL, 0, NULL, 0);
 		mdelay(1000);
 	}

 	ret = misc_call(uc_dev, TEN64_CNTRL_10G_ON, NULL, 0, NULL, 0);

 	// Wait for retimer to come back
 	for (loop = 0; loop < 5; loop++) {
 		ret = dm_i2c_probe(i2cbus, I2C_RETIMER_ADDR, 0, retim_dev);
 		if (ret == 0)
 			return 0;
 		mdelay(500);
 	}

 	return -ENOSYS;
 }

 /* ten64_board_retimer_ds110df410_init() - Configure the 10G retimer
  * Adopted from the t102xqds board file
  */
 static void ten64_board_retimer_ds110df410_init(void)
 {
 	u8 reg;
 	int ret;
 	struct udevice *retim_dev;
 	u32 board_rev = ten64_get_board_rev();

 	puts("Retimer: ");
 	/* Retimer power cycle not implemented on early board
 	 * revisions/controller firmwares
 	 */
 	if (CONFIG_IS_ENABLED(TEN64_CONTROLLER) &&
 	    board_rev >= TEN64_BOARD_REV_C) {
 		ret = board_cycle_retimer(&retim_dev);
 		if (ret) {
 			puts("Retimer power on failed\n");
 			return;
 		}
 	}

 	/* Access to Control/Shared register */
 	reg = 0x0;

 	ret = dm_i2c_write(retim_dev, 0xff, &reg, 1);
 	if (ret) {
 		printf("Error writing to retimer register (error %d)\n", ret);
 		return;
 	}

 	/* Read device revision and ID */
 	dm_i2c_read(retim_dev, 1, &reg, 1);
 	if (reg == 0xF0)
 		puts("DS110DF410 found\n");
 	else
 		printf("Unknown retimer 0x%xn\n", reg);

 	/* Enable Broadcast */
 	reg = 0x0c;
 	dm_i2c_write(retim_dev, 0xff, &reg, 1);

 	/* Perform a full reset (state, channel and clock)
 	 * for all channels
 	 * as the DS110DF410 does not have a RESET line
 	 */
 	dm_i2c_read(retim_dev, 0, &reg, 1);
 	reg |= 0x7;
 	dm_i2c_write(retim_dev, 0, &reg, 1);

 	/* Set rate/subrate = 0 */
 	reg = 0x6;
 	dm_i2c_write(retim_dev, 0x2F, &reg, 1);

 	/* Set data rate as 10.3125 Gbps */
 	reg = 0x0;
 	dm_i2c_write(retim_dev, 0x60, &reg, 1);
 	reg = 0xb2;
 	dm_i2c_write(retim_dev, 0x61, &reg, 1);
 	reg = 0x90;
 	dm_i2c_write(retim_dev, 0x62, &reg, 1);
 	reg = 0xb3;
 	dm_i2c_write(retim_dev, 0x63, &reg, 1);
 	reg = 0xff;
 	dm_i2c_write(retim_dev, 0x64, &reg, 1);

 	/* Invert channel 2 (Lower SFP TX to CPU) due to the SFP being inverted */
 	reg = 0x05;
 	dm_i2c_write(retim_dev, 0xFF, &reg, 1);
 	dm_i2c_read(retim_dev, 0x1F, &reg, 1);
 	reg |= 0x80;
 	dm_i2c_write(retim_dev, 0x1F, &reg, 1);

 	puts("OK\n");
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Traverse Ten64 Family board
	* Copyright 2017-2018 NXP
	* Copyright 2019-2021 Traverse Technologies
	*/
	#include <common.h>
	#include <dm/uclass.h>
	#include <env.h>
	#include <i2c.h>
	#include <init.h>
	#include <log.h>
	#include <malloc.h>
	#include <errno.h>
	#include <misc.h>
	#include <netdev.h>
	#include <fsl_ifc.h>
	#include <fsl_ddr.h>
	#include <fsl_sec.h>
	#include <asm/global_data.h>
	#include <asm/io.h>
	#include <fdt_support.h>
	#include <linux/delay.h>
	#include <linux/libfdt.h>
	#include <fsl-mc/fsl_mc.h>
	#include <env_internal.h>
	#include <asm/arch-fsl-layerscape/soc.h>
	#include <asm/arch/ppa.h>
	#include <hwconfig.h>
	#include <asm/arch/fsl_serdes.h>
	#include <asm/arch/soc.h>
	#include <asm/arch-fsl-layerscape/fsl_icid.h>

	#include <fsl_immap.h>

	#include "../common/ten64-controller.h"

	#define I2C_RETIMER_ADDR 0x27

	DECLARE_GLOBAL_DATA_PTR;

	static int ten64_read_board_info(struct t64uc_board_info *);
	static void ten64_set_macaddrs_from_board_info(struct t64uc_board_info *);
	static void ten64_board_retimer_ds110df410_init(void);

	enum {
	TEN64_BOARD_REV_A = 0xFF,
	TEN64_BOARD_REV_B = 0xFE,
	TEN64_BOARD_REV_C = 0xFD
	};

	#define RESV_MEM_IN_BANK(b) (gd->arch.resv_ram >= base[b] && \
	gd->arch.resv_ram < base[b] + size[b])

	int board_early_init_f(void)
	{
	fsl_lsch3_early_init_f();
	return 0;
	}

	static u32 ten64_get_board_rev(void)
	{
	struct ccsr_gur dcfg = (void )CONFIG_SYS_FSL_GUTS_ADDR;
	u32 board_rev_in = in_le32(&dcfg->gpporcr1);
	return board_rev_in;
	}

	int checkboard(void)
	{
	enum boot_src src = get_boot_src();
	char boardmodel[32];
	struct t64uc_board_info boardinfo;
	u32 board_rev = ten64_get_board_rev();

	switch (board_rev) {
	case TEN64_BOARD_REV_A:
	snprintf(boardmodel, 32, "1064-0201A (Alpha)");
	break;
	case TEN64_BOARD_REV_B:
	snprintf(boardmodel, 32, "1064-0201B (Beta)");
	break;
	case TEN64_BOARD_REV_C:
	snprintf(boardmodel, 32, "1064-0201C");
	break;
	default:
	snprintf(boardmodel, 32, "1064 Revision %X", (0xFF - board_rev));
	break;
	}

	printf("Board: %s, boot from ", boardmodel);
	if (src == BOOT_SOURCE_SD_MMC)
	puts("SD card\n");
	else if (src == BOOT_SOURCE_QSPI_NOR)
	puts("QSPI\n");
	else
	printf("Unknown boot source %d\n", src);

	puts("Controller: ");
	if (CONFIG_IS_ENABLED(TEN64_CONTROLLER)) {
	/* Driver not compatible with alpha/beta board MCU firmware */
	if (board_rev <= TEN64_BOARD_REV_C) {
	if (ten64_read_board_info(&boardinfo)) {
	puts("ERROR: unable to communicate\n");
	} else {
	printf("firmware %d.%d.%d\n",
	boardinfo.fwversion_major,
	boardinfo.fwversion_minor,
	boardinfo.fwversion_patch);
	ten64_set_macaddrs_from_board_info(&boardinfo);
	}
	} else {
	puts("not supported on this board revision\n");
	}
	} else {
	puts("driver not enabled (no MAC addresses or other information will be read)\n");
	}

	return 0;
	}

	int board_init(void)
	{
	init_final_memctl_regs();

	if (CONFIG_IS_ENABLED(FSL_CAAM))
	sec_init();

	return 0;
	}

	int fsl_initdram(void)
	{
	gd->ram_size = tfa_get_dram_size();

	if (!gd->ram_size)
	gd->ram_size = fsl_ddr_sdram_size();

	return 0;
	}

	void detail_board_ddr_info(void)
	{
	puts("\nDDR ");
	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
	print_ddr_info(0);
	}

	void board_quiesce_devices(void)
	{
	if (IS_ENABLED(CONFIG_FSL_MC_ENET))
	fsl_mc_ldpaa_exit(gd->bd);
	}

	void fdt_fixup_board_enet(void *fdt)
	{
	int offset;

	offset = fdt_path_offset(fdt, "/fsl-mc");

	if (offset < 0)
	offset = fdt_path_offset(fdt, "/soc/fsl-mc");

	if (offset < 0) {
	printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
	__func__, offset);
	return;
	}

	if (get_mc_boot_status() == 0 &&
	(is_lazy_dpl_addr_valid() \|\| get_dpl_apply_status() == 0))
	fdt_status_okay(fdt, offset);
	else
	fdt_status_fail(fdt, offset);
	}

	/* Called after SoC board_late_init in fsl-layerscape/soc.c */
	int fsl_board_late_init(void)
	{
	ten64_board_retimer_ds110df410_init();
	return 0;
	}

	int ft_board_setup(void blob, struct bd_info bd)
	{
	int i;
	u16 mc_memory_bank = 0;

	u64 *base;
	u64 *size;
	u64 mc_memory_base = 0;
	u64 mc_memory_size = 0;
	u16 total_memory_banks;

	debug("%s blob=0x%p\n", __func__, blob);

	ft_cpu_setup(blob, bd);

	fdt_fixup_mc_ddr(&mc_memory_base, &mc_memory_size);

	if (mc_memory_base != 0)
	mc_memory_bank++;

	total_memory_banks = CONFIG_NR_DRAM_BANKS + mc_memory_bank;

	base = calloc(total_memory_banks, sizeof(u64));
	size = calloc(total_memory_banks, sizeof(u64));

	/* fixup DT for the two GPP DDR banks */
	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
	base[i] = gd->bd->bi_dram[i].start;
	size[i] = gd->bd->bi_dram[i].size;
	/* reduce size if reserved memory is within this bank */
	if (CONFIG_IS_ENABLED(RESV_RAM) && RESV_MEM_IN_BANK(i))
	size[i] = gd->arch.resv_ram - base[i];
	}

	if (mc_memory_base != 0) {
	for (i = 0; i <= total_memory_banks; i++) {
	if (base[i] == 0 && size[i] == 0) {
	base[i] = mc_memory_base;
	size[i] = mc_memory_size;
	break;
	}
	}
	}

	fdt_fixup_memory_banks(blob, base, size, total_memory_banks);

	fdt_fsl_mc_fixup_iommu_map_entry(blob);

	if (CONFIG_IS_ENABLED(FSL_MC_ENET))
	fdt_fixup_board_enet(blob);

	fdt_fixup_icid(blob);

	return 0;
	}

	#define MACADDRBITS(a, b) (u8)(((a) >> (b)) & 0xFF)

	/** Probe and return a udevice for the Ten64 board microcontroller.
	* Optionally, return the I2C bus the microcontroller resides on
	* @i2c_bus_out: return I2C bus device handle in this pointer
	*/
	static int ten64_get_micro_udevice(struct udevice ucdev, struct udevice i2c_bus_out)
	{
	int ret;
	struct udevice *i2cbus;

	ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &i2cbus);
	if (ret) {
	printf("%s: Could not get I2C UCLASS", __func__);
	return ret;
	}
	if (i2c_bus_out)
	*i2c_bus_out = i2cbus;

	ret = dm_i2c_probe(i2cbus, 0x7E, DM_I2C_CHIP_RD_ADDRESS, ucdev);
	if (ret) {
	printf("%s: Could not get microcontroller device\n", __func__);
	return ret;
	}
	return ret;
	}

	static int ten64_read_board_info(struct t64uc_board_info *boardinfo)
	{
	struct udevice *ucdev;
	int ret;

	ret = ten64_get_micro_udevice(&ucdev, NULL);
	if (ret)
	return ret;

	ret = misc_call(ucdev, TEN64_CNTRL_GET_BOARD_INFO, NULL, 0, (void *)boardinfo, 0);
	if (ret)
	return ret;

	return 0;
	}

	static void ten64_set_macaddrs_from_board_info(struct t64uc_board_info *boardinfo)
	{
	char ethaddr[18];
	char enetvar[10];
	u8 intfidx, this_dpmac_num;
	u64 macaddr = 0;
	/* We will copy the MAC address returned from the
	* uC (48 bits) into the u64 macaddr
	*/
	u8 macaddr_bytes = (u8 )&macaddr + 2;

	/** MAC addresses are allocated in order of the physical port numbers,
	* DPMAC7->10 is "eth0" through "eth3"
	* DPMAC3->6 is "eth4" through "eth7"
	* DPMAC2 and 1 are "eth8" and "eth9" respectively
	*/
	int allocation_order[10] = {7, 8, 9, 10, 3, 4, 5, 6, 2, 1};

	memcpy(macaddr_bytes, boardinfo->mac, 6);
	/* MAC address bytes from uC are in big endian,
	* convert to CPU
	*/
	macaddr = __be64_to_cpu(macaddr);

	for (intfidx = 0; intfidx < 10; intfidx++) {
	snprintf(ethaddr, 18, "%02X:%02X:%02X:%02X:%02X:%02X",
	MACADDRBITS(macaddr, 40),
	MACADDRBITS(macaddr, 32),
	MACADDRBITS(macaddr, 24),
	MACADDRBITS(macaddr, 16),
	MACADDRBITS(macaddr, 8),
	MACADDRBITS(macaddr, 0));

	this_dpmac_num = allocation_order[intfidx];
	printf("DPMAC%d: %s\n", this_dpmac_num, ethaddr);
	snprintf(enetvar, 10,
	(this_dpmac_num != 1) ? "eth%daddr" : "ethaddr",
	this_dpmac_num - 1);
	macaddr++;

	if (!env_get(enetvar))
	env_set(enetvar, ethaddr);
	}
	}

	/* The retimer (DS110DF410) is one of the devices without
	* a RESET line, but a power switch is on the board
	* allowing it to be reset via uC command
	*/
	static int board_cycle_retimer(struct udevice **retim_dev)
	{
	int ret;
	u8 loop;
	struct udevice *uc_dev;
	struct udevice *i2cbus;

	ret = ten64_get_micro_udevice(&uc_dev, &i2cbus);
	if (ret)
	return ret;

	ret = dm_i2c_probe(i2cbus, I2C_RETIMER_ADDR, 0, retim_dev);
	if (ret == 0) {
	puts("(retimer on, resetting...) ");

	ret = misc_call(uc_dev, TEN64_CNTRL_10G_OFF, NULL, 0, NULL, 0);
	mdelay(1000);
	}

	ret = misc_call(uc_dev, TEN64_CNTRL_10G_ON, NULL, 0, NULL, 0);

	// Wait for retimer to come back
	for (loop = 0; loop < 5; loop++) {
	ret = dm_i2c_probe(i2cbus, I2C_RETIMER_ADDR, 0, retim_dev);
	if (ret == 0)
	return 0;
	mdelay(500);
	}

	return -ENOSYS;
	}

	/* ten64_board_retimer_ds110df410_init() - Configure the 10G retimer
	* Adopted from the t102xqds board file
	*/
	static void ten64_board_retimer_ds110df410_init(void)
	{
	u8 reg;
	int ret;
	struct udevice *retim_dev;
	u32 board_rev = ten64_get_board_rev();

	puts("Retimer: ");
	/* Retimer power cycle not implemented on early board
	* revisions/controller firmwares
	*/
	if (CONFIG_IS_ENABLED(TEN64_CONTROLLER) &&
	board_rev >= TEN64_BOARD_REV_C) {
	ret = board_cycle_retimer(&retim_dev);
	if (ret) {
	puts("Retimer power on failed\n");
	return;
	}
	}

	/* Access to Control/Shared register */
	reg = 0x0;

	ret = dm_i2c_write(retim_dev, 0xff, &reg, 1);
	if (ret) {
	printf("Error writing to retimer register (error %d)\n", ret);
	return;
	}

	/* Read device revision and ID */
	dm_i2c_read(retim_dev, 1, &reg, 1);
	if (reg == 0xF0)
	puts("DS110DF410 found\n");
	else
	printf("Unknown retimer 0x%xn\n", reg);

	/* Enable Broadcast */
	reg = 0x0c;
	dm_i2c_write(retim_dev, 0xff, &reg, 1);

	/* Perform a full reset (state, channel and clock)
	* for all channels
	* as the DS110DF410 does not have a RESET line
	*/
	dm_i2c_read(retim_dev, 0, &reg, 1);
	reg \|= 0x7;
	dm_i2c_write(retim_dev, 0, &reg, 1);

	/* Set rate/subrate = 0 */
	reg = 0x6;
	dm_i2c_write(retim_dev, 0x2F, &reg, 1);

	/* Set data rate as 10.3125 Gbps */
	reg = 0x0;
	dm_i2c_write(retim_dev, 0x60, &reg, 1);
	reg = 0xb2;
	dm_i2c_write(retim_dev, 0x61, &reg, 1);
	reg = 0x90;
	dm_i2c_write(retim_dev, 0x62, &reg, 1);
	reg = 0xb3;
	dm_i2c_write(retim_dev, 0x63, &reg, 1);
	reg = 0xff;
	dm_i2c_write(retim_dev, 0x64, &reg, 1);

	/* Invert channel 2 (Lower SFP TX to CPU) due to the SFP being inverted */
	reg = 0x05;
	dm_i2c_write(retim_dev, 0xFF, &reg, 1);
	dm_i2c_read(retim_dev, 0x1F, &reg, 1);
	reg \|= 0x80;
	dm_i2c_write(retim_dev, 0x1F, &reg, 1);

	puts("OK\n");
	}