| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000-2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
| */ |
| |
| #ifndef CONFIG_CLK_MPC83XX |
| |
| #include <common.h> |
| #include <clock_legacy.h> |
| #include <mpc83xx.h> |
| #include <command.h> |
| #include <vsprintf.h> |
| #include <asm/processor.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* ----------------------------------------------------------------- */ |
| |
| typedef enum { |
| _unk, |
| _off, |
| _byp, |
| _x8, |
| _x4, |
| _x2, |
| _x1, |
| _1x, |
| _1_5x, |
| _2x, |
| _2_5x, |
| _3x |
| } mult_t; |
| |
| typedef struct { |
| mult_t core_csb_ratio; |
| mult_t vco_divider; |
| } corecnf_t; |
| |
| static corecnf_t corecnf_tab[] = { |
| {_byp, _byp}, /* 0x00 */ |
| {_byp, _byp}, /* 0x01 */ |
| {_byp, _byp}, /* 0x02 */ |
| {_byp, _byp}, /* 0x03 */ |
| {_byp, _byp}, /* 0x04 */ |
| {_byp, _byp}, /* 0x05 */ |
| {_byp, _byp}, /* 0x06 */ |
| {_byp, _byp}, /* 0x07 */ |
| {_1x, _x2}, /* 0x08 */ |
| {_1x, _x4}, /* 0x09 */ |
| {_1x, _x8}, /* 0x0A */ |
| {_1x, _x8}, /* 0x0B */ |
| {_1_5x, _x2}, /* 0x0C */ |
| {_1_5x, _x4}, /* 0x0D */ |
| {_1_5x, _x8}, /* 0x0E */ |
| {_1_5x, _x8}, /* 0x0F */ |
| {_2x, _x2}, /* 0x10 */ |
| {_2x, _x4}, /* 0x11 */ |
| {_2x, _x8}, /* 0x12 */ |
| {_2x, _x8}, /* 0x13 */ |
| {_2_5x, _x2}, /* 0x14 */ |
| {_2_5x, _x4}, /* 0x15 */ |
| {_2_5x, _x8}, /* 0x16 */ |
| {_2_5x, _x8}, /* 0x17 */ |
| {_3x, _x2}, /* 0x18 */ |
| {_3x, _x4}, /* 0x19 */ |
| {_3x, _x8}, /* 0x1A */ |
| {_3x, _x8}, /* 0x1B */ |
| }; |
| |
| /* ----------------------------------------------------------------- */ |
| |
| /* |
| * |
| */ |
| int get_clocks(void) |
| { |
| volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; |
| u32 pci_sync_in; |
| u8 spmf; |
| u8 clkin_div; |
| u32 sccr; |
| u32 corecnf_tab_index; |
| u8 corepll; |
| u32 lcrr; |
| |
| u32 csb_clk; |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) |
| u32 tsec1_clk; |
| u32 tsec2_clk; |
| u32 usbdr_clk; |
| #elif defined(CONFIG_ARCH_MPC8309) |
| u32 usbdr_clk; |
| #endif |
| #ifdef CONFIG_ARCH_MPC834X |
| u32 usbmph_clk; |
| #endif |
| u32 core_clk; |
| u32 i2c1_clk; |
| #if !defined(CONFIG_ARCH_MPC832X) |
| u32 i2c2_clk; |
| #endif |
| #if defined(CONFIG_ARCH_MPC8315) |
| u32 tdm_clk; |
| #endif |
| #if defined(CONFIG_FSL_ESDHC) |
| u32 sdhc_clk; |
| #endif |
| #if !defined(CONFIG_ARCH_MPC8309) |
| u32 enc_clk; |
| #endif |
| u32 lbiu_clk; |
| u32 lclk_clk; |
| u32 mem_clk; |
| #if defined(CONFIG_ARCH_MPC8360) |
| u32 mem_sec_clk; |
| #endif |
| #if defined(CONFIG_QE) |
| u32 qepmf; |
| u32 qepdf; |
| u32 qe_clk; |
| u32 brg_clk; |
| #endif |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC837X) |
| u32 pciexp1_clk; |
| u32 pciexp2_clk; |
| #endif |
| #if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) |
| u32 sata_clk; |
| #endif |
| |
| if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) |
| return -1; |
| |
| clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); |
| |
| if (im->reset.rcwh & HRCWH_PCI_HOST) { |
| #if defined(CONFIG_SYS_CLK_FREQ) |
| pci_sync_in = CONFIG_SYS_CLK_FREQ / (1 + clkin_div); |
| #else |
| pci_sync_in = 0xDEADBEEF; |
| #endif |
| } else { |
| #if defined(CONFIG_83XX_PCICLK) |
| pci_sync_in = CONFIG_83XX_PCICLK; |
| #else |
| pci_sync_in = 0xDEADBEEF; |
| #endif |
| } |
| |
| spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; |
| csb_clk = pci_sync_in * (1 + clkin_div) * spmf; |
| |
| sccr = im->clk.sccr; |
| |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) |
| switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) { |
| case 0: |
| tsec1_clk = 0; |
| break; |
| case 1: |
| tsec1_clk = csb_clk; |
| break; |
| case 2: |
| tsec1_clk = csb_clk / 2; |
| break; |
| case 3: |
| tsec1_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_TSEC1CM value */ |
| return -2; |
| } |
| #endif |
| |
| #if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) |
| switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { |
| case 0: |
| usbdr_clk = 0; |
| break; |
| case 1: |
| usbdr_clk = csb_clk; |
| break; |
| case 2: |
| usbdr_clk = csb_clk / 2; |
| break; |
| case 3: |
| usbdr_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_USBDRCM value */ |
| return -3; |
| } |
| #endif |
| |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) || \ |
| defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) |
| switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) { |
| case 0: |
| tsec2_clk = 0; |
| break; |
| case 1: |
| tsec2_clk = csb_clk; |
| break; |
| case 2: |
| tsec2_clk = csb_clk / 2; |
| break; |
| case 3: |
| tsec2_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_TSEC2CM value */ |
| return -4; |
| } |
| #elif defined(CONFIG_ARCH_MPC8313) |
| tsec2_clk = tsec1_clk; |
| |
| if (!(sccr & SCCR_TSEC1ON)) |
| tsec1_clk = 0; |
| if (!(sccr & SCCR_TSEC2ON)) |
| tsec2_clk = 0; |
| #endif |
| |
| #if defined(CONFIG_ARCH_MPC834X) |
| switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) { |
| case 0: |
| usbmph_clk = 0; |
| break; |
| case 1: |
| usbmph_clk = csb_clk; |
| break; |
| case 2: |
| usbmph_clk = csb_clk / 2; |
| break; |
| case 3: |
| usbmph_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_USBMPHCM value */ |
| return -5; |
| } |
| |
| if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) { |
| /* if USB MPH clock is not disabled and |
| * USB DR clock is not disabled then |
| * USB MPH & USB DR must have the same rate |
| */ |
| return -6; |
| } |
| #endif |
| #if !defined(CONFIG_ARCH_MPC8309) |
| switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { |
| case 0: |
| enc_clk = 0; |
| break; |
| case 1: |
| enc_clk = csb_clk; |
| break; |
| case 2: |
| enc_clk = csb_clk / 2; |
| break; |
| case 3: |
| enc_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_ENCCM value */ |
| return -7; |
| } |
| #endif |
| |
| #if defined(CONFIG_FSL_ESDHC) |
| switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) { |
| case 0: |
| sdhc_clk = 0; |
| break; |
| case 1: |
| sdhc_clk = csb_clk; |
| break; |
| case 2: |
| sdhc_clk = csb_clk / 2; |
| break; |
| case 3: |
| sdhc_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_SDHCCM value */ |
| return -8; |
| } |
| #endif |
| #if defined(CONFIG_ARCH_MPC8315) |
| switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) { |
| case 0: |
| tdm_clk = 0; |
| break; |
| case 1: |
| tdm_clk = csb_clk; |
| break; |
| case 2: |
| tdm_clk = csb_clk / 2; |
| break; |
| case 3: |
| tdm_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_TDMCM value */ |
| return -8; |
| } |
| #endif |
| |
| #if defined(CONFIG_ARCH_MPC834X) |
| i2c1_clk = tsec2_clk; |
| #elif defined(CONFIG_ARCH_MPC8360) |
| i2c1_clk = csb_clk; |
| #elif defined(CONFIG_ARCH_MPC832X) |
| i2c1_clk = enc_clk; |
| #elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) |
| i2c1_clk = enc_clk; |
| #elif defined(CONFIG_FSL_ESDHC) |
| i2c1_clk = sdhc_clk; |
| #elif defined(CONFIG_ARCH_MPC837X) |
| i2c1_clk = enc_clk; |
| #elif defined(CONFIG_ARCH_MPC8309) |
| i2c1_clk = csb_clk; |
| #endif |
| #if !defined(CONFIG_ARCH_MPC832X) |
| i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ |
| #endif |
| |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC837X) |
| switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) { |
| case 0: |
| pciexp1_clk = 0; |
| break; |
| case 1: |
| pciexp1_clk = csb_clk; |
| break; |
| case 2: |
| pciexp1_clk = csb_clk / 2; |
| break; |
| case 3: |
| pciexp1_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_PCIEXP1CM value */ |
| return -9; |
| } |
| |
| switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) { |
| case 0: |
| pciexp2_clk = 0; |
| break; |
| case 1: |
| pciexp2_clk = csb_clk; |
| break; |
| case 2: |
| pciexp2_clk = csb_clk / 2; |
| break; |
| case 3: |
| pciexp2_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_PCIEXP2CM value */ |
| return -10; |
| } |
| #endif |
| |
| #if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) |
| switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) { |
| case 0: |
| sata_clk = 0; |
| break; |
| case 1: |
| sata_clk = csb_clk; |
| break; |
| case 2: |
| sata_clk = csb_clk / 2; |
| break; |
| case 3: |
| sata_clk = csb_clk / 3; |
| break; |
| default: |
| /* unknown SCCR_SATA1CM value */ |
| return -11; |
| } |
| #endif |
| |
| lbiu_clk = csb_clk * |
| (1 + ((im->clk.spmr & SPMR_LBIUCM) >> SPMR_LBIUCM_SHIFT)); |
| lcrr = (im->im_lbc.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; |
| switch (lcrr) { |
| case 2: |
| case 4: |
| case 8: |
| lclk_clk = lbiu_clk / lcrr; |
| break; |
| default: |
| /* unknown lcrr */ |
| return -12; |
| } |
| |
| mem_clk = csb_clk * |
| (1 + ((im->clk.spmr & SPMR_DDRCM) >> SPMR_DDRCM_SHIFT)); |
| corepll = (im->clk.spmr & SPMR_COREPLL) >> SPMR_COREPLL_SHIFT; |
| |
| #if defined(CONFIG_ARCH_MPC8360) |
| mem_sec_clk = csb_clk * (1 + |
| ((im->clk.spmr & SPMR_LBIUCM) >> SPMR_LBIUCM_SHIFT)); |
| #endif |
| |
| corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5); |
| if (corecnf_tab_index > (ARRAY_SIZE(corecnf_tab))) { |
| /* corecnf_tab_index is too high, possibly wrong value */ |
| return -11; |
| } |
| switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) { |
| case _byp: |
| case _x1: |
| case _1x: |
| core_clk = csb_clk; |
| break; |
| case _1_5x: |
| core_clk = (3 * csb_clk) / 2; |
| break; |
| case _2x: |
| core_clk = 2 * csb_clk; |
| break; |
| case _2_5x: |
| core_clk = (5 * csb_clk) / 2; |
| break; |
| case _3x: |
| core_clk = 3 * csb_clk; |
| break; |
| default: |
| /* unknown core to csb ratio */ |
| return -13; |
| } |
| |
| #if defined(CONFIG_QE) |
| qepmf = (im->clk.spmr & SPMR_CEPMF) >> SPMR_CEPMF_SHIFT; |
| qepdf = (im->clk.spmr & SPMR_CEPDF) >> SPMR_CEPDF_SHIFT; |
| qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); |
| brg_clk = qe_clk / 2; |
| #endif |
| |
| gd->arch.csb_clk = csb_clk; |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) |
| gd->arch.tsec1_clk = tsec1_clk; |
| gd->arch.tsec2_clk = tsec2_clk; |
| gd->arch.usbdr_clk = usbdr_clk; |
| #elif defined(CONFIG_ARCH_MPC8309) |
| gd->arch.usbdr_clk = usbdr_clk; |
| #endif |
| #if defined(CONFIG_ARCH_MPC834X) |
| gd->arch.usbmph_clk = usbmph_clk; |
| #endif |
| #if defined(CONFIG_ARCH_MPC8315) |
| gd->arch.tdm_clk = tdm_clk; |
| #endif |
| #if defined(CONFIG_FSL_ESDHC) |
| gd->arch.sdhc_clk = sdhc_clk; |
| #endif |
| gd->arch.core_clk = core_clk; |
| gd->arch.i2c1_clk = i2c1_clk; |
| #if !defined(CONFIG_ARCH_MPC832X) |
| gd->arch.i2c2_clk = i2c2_clk; |
| #endif |
| #if !defined(CONFIG_ARCH_MPC8309) |
| gd->arch.enc_clk = enc_clk; |
| #endif |
| gd->arch.lbiu_clk = lbiu_clk; |
| gd->arch.lclk_clk = lclk_clk; |
| gd->mem_clk = mem_clk; |
| #if defined(CONFIG_ARCH_MPC8360) |
| gd->arch.mem_sec_clk = mem_sec_clk; |
| #endif |
| #if defined(CONFIG_QE) |
| gd->arch.qe_clk = qe_clk; |
| gd->arch.brg_clk = brg_clk; |
| #endif |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC837X) |
| gd->arch.pciexp1_clk = pciexp1_clk; |
| gd->arch.pciexp2_clk = pciexp2_clk; |
| #endif |
| #if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) |
| gd->arch.sata_clk = sata_clk; |
| #endif |
| gd->pci_clk = pci_sync_in; |
| gd->cpu_clk = gd->arch.core_clk; |
| gd->bus_clk = gd->arch.csb_clk; |
| return 0; |
| |
| } |
| |
| /******************************************** |
| * get_bus_freq |
| * return system bus freq in Hz |
| *********************************************/ |
| ulong get_bus_freq(ulong dummy) |
| { |
| return gd->arch.csb_clk; |
| } |
| |
| /******************************************** |
| * get_ddr_freq |
| * return ddr bus freq in Hz |
| *********************************************/ |
| ulong get_ddr_freq(ulong dummy) |
| { |
| return gd->mem_clk; |
| } |
| |
| int get_serial_clock(void) |
| { |
| return get_bus_freq(0); |
| } |
| |
| static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| char buf[32]; |
| |
| printf("Clock configuration:\n"); |
| printf(" Core: %-4s MHz\n", |
| strmhz(buf, gd->arch.core_clk)); |
| printf(" Coherent System Bus: %-4s MHz\n", |
| strmhz(buf, gd->arch.csb_clk)); |
| #if defined(CONFIG_QE) |
| printf(" QE: %-4s MHz\n", |
| strmhz(buf, gd->arch.qe_clk)); |
| printf(" BRG: %-4s MHz\n", |
| strmhz(buf, gd->arch.brg_clk)); |
| #endif |
| printf(" Local Bus Controller:%-4s MHz\n", |
| strmhz(buf, gd->arch.lbiu_clk)); |
| printf(" Local Bus: %-4s MHz\n", |
| strmhz(buf, gd->arch.lclk_clk)); |
| printf(" DDR: %-4s MHz\n", strmhz(buf, gd->mem_clk)); |
| #if defined(CONFIG_ARCH_MPC8360) |
| printf(" DDR Secondary: %-4s MHz\n", |
| strmhz(buf, gd->arch.mem_sec_clk)); |
| #endif |
| #if !defined(CONFIG_ARCH_MPC8309) |
| printf(" SEC: %-4s MHz\n", |
| strmhz(buf, gd->arch.enc_clk)); |
| #endif |
| printf(" I2C1: %-4s MHz\n", |
| strmhz(buf, gd->arch.i2c1_clk)); |
| #if !defined(CONFIG_ARCH_MPC832X) |
| printf(" I2C2: %-4s MHz\n", |
| strmhz(buf, gd->arch.i2c2_clk)); |
| #endif |
| #if defined(CONFIG_ARCH_MPC8315) |
| printf(" TDM: %-4s MHz\n", |
| strmhz(buf, gd->arch.tdm_clk)); |
| #endif |
| #if defined(CONFIG_FSL_ESDHC) |
| printf(" SDHC: %-4s MHz\n", |
| strmhz(buf, gd->arch.sdhc_clk)); |
| #endif |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) |
| printf(" TSEC1: %-4s MHz\n", |
| strmhz(buf, gd->arch.tsec1_clk)); |
| printf(" TSEC2: %-4s MHz\n", |
| strmhz(buf, gd->arch.tsec2_clk)); |
| printf(" USB DR: %-4s MHz\n", |
| strmhz(buf, gd->arch.usbdr_clk)); |
| #elif defined(CONFIG_ARCH_MPC8309) |
| printf(" USB DR: %-4s MHz\n", |
| strmhz(buf, gd->arch.usbdr_clk)); |
| #endif |
| #if defined(CONFIG_ARCH_MPC834X) |
| printf(" USB MPH: %-4s MHz\n", |
| strmhz(buf, gd->arch.usbmph_clk)); |
| #endif |
| #if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ |
| defined(CONFIG_ARCH_MPC837X) |
| printf(" PCIEXP1: %-4s MHz\n", |
| strmhz(buf, gd->arch.pciexp1_clk)); |
| printf(" PCIEXP2: %-4s MHz\n", |
| strmhz(buf, gd->arch.pciexp2_clk)); |
| #endif |
| #if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) |
| printf(" SATA: %-4s MHz\n", |
| strmhz(buf, gd->arch.sata_clk)); |
| #endif |
| return 0; |
| } |
| |
| U_BOOT_CMD(clocks, 1, 0, do_clocks, |
| "print clock configuration", |
| " clocks" |
| ); |
| |
| #endif |