blob: 5170044a3aea8e665a0f8e81059162934f2fc71d [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*-
* Copyright (c) 2007-2008, Juniper Networks, Inc.
* Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it>
* All rights reserved.
*/
#ifndef USB_EHCI_H
#define USB_EHCI_H
#include <stdbool.h>
#include <usb.h>
#include <generic-phy.h>
/* Section 2.2.3 - N_PORTS */
#define MAX_HC_PORTS 15
/*
* Register Space.
*/
struct ehci_hccr {
uint32_t cr_capbase;
#define HC_LENGTH(p) (((p) >> 0) & 0x00ff)
#define HC_VERSION(p) (((p) >> 16) & 0xffff)
uint32_t cr_hcsparams;
#define HCS_PPC(p) ((p) & (1 << 4))
#define HCS_INDICATOR(p) ((p) & (1 << 16)) /* Port indicators */
#define HCS_N_PORTS(p) (((p) >> 0) & 0xf)
uint32_t cr_hccparams;
uint8_t cr_hcsp_portrt[8];
} __attribute__ ((packed, aligned(4)));
struct ehci_hcor {
uint32_t or_usbcmd;
#define CMD_PARK (1 << 11) /* enable "park" */
#define CMD_PARK_CNT(c) (((c) >> 8) & 3) /* how many transfers to park */
#define CMD_LRESET (1 << 7) /* partial reset */
#define CMD_IAAD (1 << 6) /* "doorbell" interrupt */
#define CMD_ASE (1 << 5) /* async schedule enable */
#define CMD_PSE (1 << 4) /* periodic schedule enable */
#define CMD_RESET (1 << 1) /* reset HC not bus */
#define CMD_RUN (1 << 0) /* start/stop HC */
uint32_t or_usbsts;
#define STS_ASS (1 << 15)
#define STS_PSS (1 << 14)
#define STS_HALT (1 << 12)
#define STS_IAA (1 << 5)
uint32_t or_usbintr;
#define INTR_UE (1 << 0) /* USB interrupt enable */
#define INTR_UEE (1 << 1) /* USB error interrupt enable */
#define INTR_PCE (1 << 2) /* Port change detect enable */
#define INTR_SEE (1 << 4) /* system error enable */
#define INTR_AAE (1 << 5) /* Interrupt on async adavance enable */
uint32_t or_frindex;
uint32_t or_ctrldssegment;
uint32_t or_periodiclistbase;
uint32_t or_asynclistaddr;
uint32_t _reserved_0_;
uint32_t or_burstsize;
uint32_t or_txfilltuning;
#define TXFIFO_THRESH_MASK (0x3f << 16)
#define TXFIFO_THRESH(p) ((p & 0x3f) << 16)
uint32_t _reserved_1_[6];
uint32_t or_configflag;
#define FLAG_CF (1 << 0) /* true: we'll support "high speed" */
uint32_t or_portsc[MAX_HC_PORTS];
#define PORTSC_PSPD(x) (((x) >> 26) & 0x3)
#define PORTSC_PSPD_FS 0x0
#define PORTSC_PSPD_LS 0x1
#define PORTSC_PSPD_HS 0x2
#define PORTSC_FSL_PFSC BIT(24) /* PFSC bit to disable HS chirping */
uint32_t or_systune;
} __attribute__ ((packed, aligned(4)));
#define USBMODE 0x68 /* USB Device mode */
#define USBMODE_SDIS (1 << 3) /* Stream disable */
#define USBMODE_BE (1 << 2) /* BE/LE endiannes select */
#define USBMODE_CM_HC (3 << 0) /* host controller mode */
#define USBMODE_CM_IDLE (0 << 0) /* idle state */
/* Interface descriptor */
struct usb_linux_interface_descriptor {
unsigned char bLength;
unsigned char bDescriptorType;
unsigned char bInterfaceNumber;
unsigned char bAlternateSetting;
unsigned char bNumEndpoints;
unsigned char bInterfaceClass;
unsigned char bInterfaceSubClass;
unsigned char bInterfaceProtocol;
unsigned char iInterface;
} __attribute__ ((packed));
/* Configuration descriptor information.. */
struct usb_linux_config_descriptor {
unsigned char bLength;
unsigned char bDescriptorType;
unsigned short wTotalLength;
unsigned char bNumInterfaces;
unsigned char bConfigurationValue;
unsigned char iConfiguration;
unsigned char bmAttributes;
unsigned char MaxPower;
} __attribute__ ((packed));
#if defined CONFIG_EHCI_DESC_BIG_ENDIAN
#define ehci_readl(x) be32_to_cpu(__raw_readl(x))
#define ehci_writel(a, b) __raw_writel(cpu_to_be32(b), a)
#else
#define ehci_readl(x) readl(x)
#define ehci_writel(a, b) writel(b, a)
#endif
#if defined CONFIG_EHCI_MMIO_BIG_ENDIAN
#define hc32_to_cpu(x) be32_to_cpu((x))
#define cpu_to_hc32(x) cpu_to_be32((x))
#else
#define hc32_to_cpu(x) le32_to_cpu((x))
#define cpu_to_hc32(x) cpu_to_le32((x))
#endif
#define EHCI_PS_WKOC_E (1 << 22) /* RW wake on over current */
#define EHCI_PS_WKDSCNNT_E (1 << 21) /* RW wake on disconnect */
#define EHCI_PS_WKCNNT_E (1 << 20) /* RW wake on connect */
#define EHCI_PS_PO (1 << 13) /* RW port owner */
#define EHCI_PS_PP (1 << 12) /* RW,RO port power */
#define EHCI_PS_LS (3 << 10) /* RO line status */
#define EHCI_PS_PR (1 << 8) /* RW port reset */
#define EHCI_PS_SUSP (1 << 7) /* RW suspend */
#define EHCI_PS_FPR (1 << 6) /* RW force port resume */
#define EHCI_PS_OCC (1 << 5) /* RWC over current change */
#define EHCI_PS_OCA (1 << 4) /* RO over current active */
#define EHCI_PS_PEC (1 << 3) /* RWC port enable change */
#define EHCI_PS_PE (1 << 2) /* RW port enable */
#define EHCI_PS_CSC (1 << 1) /* RWC connect status change */
#define EHCI_PS_CS (1 << 0) /* RO connect status */
#define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC)
#define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == (1 << 10))
/*
* Schedule Interface Space.
*
* IMPORTANT: Software must ensure that no interface data structure
* reachable by the EHCI host controller spans a 4K page boundary!
*
* Periodic transfers (i.e. isochronous and interrupt transfers) are
* not supported.
*/
/* Queue Element Transfer Descriptor (qTD). */
struct qTD {
/* this part defined by EHCI spec */
uint32_t qt_next; /* see EHCI 3.5.1 */
#define QT_NEXT_TERMINATE 1
uint32_t qt_altnext; /* see EHCI 3.5.2 */
uint32_t qt_token; /* see EHCI 3.5.3 */
#define QT_TOKEN_DT(x) (((x) & 0x1) << 31) /* Data Toggle */
#define QT_TOKEN_GET_DT(x) (((x) >> 31) & 0x1)
#define QT_TOKEN_TOTALBYTES(x) (((x) & 0x7fff) << 16) /* Total Bytes to Transfer */
#define QT_TOKEN_GET_TOTALBYTES(x) (((x) >> 16) & 0x7fff)
#define QT_TOKEN_IOC(x) (((x) & 0x1) << 15) /* Interrupt On Complete */
#define QT_TOKEN_CPAGE(x) (((x) & 0x7) << 12) /* Current Page */
#define QT_TOKEN_CERR(x) (((x) & 0x3) << 10) /* Error Counter */
#define QT_TOKEN_PID(x) (((x) & 0x3) << 8) /* PID Code */
#define QT_TOKEN_PID_OUT 0x0
#define QT_TOKEN_PID_IN 0x1
#define QT_TOKEN_PID_SETUP 0x2
#define QT_TOKEN_STATUS(x) (((x) & 0xff) << 0) /* Status */
#define QT_TOKEN_GET_STATUS(x) (((x) >> 0) & 0xff)
#define QT_TOKEN_STATUS_ACTIVE 0x80
#define QT_TOKEN_STATUS_HALTED 0x40
#define QT_TOKEN_STATUS_DATBUFERR 0x20
#define QT_TOKEN_STATUS_BABBLEDET 0x10
#define QT_TOKEN_STATUS_XACTERR 0x08
#define QT_TOKEN_STATUS_MISSEDUFRAME 0x04
#define QT_TOKEN_STATUS_SPLITXSTATE 0x02
#define QT_TOKEN_STATUS_PERR 0x01
#define QT_BUFFER_CNT 5
uint32_t qt_buffer[QT_BUFFER_CNT]; /* see EHCI 3.5.4 */
uint32_t qt_buffer_hi[QT_BUFFER_CNT]; /* Appendix B */
/* pad struct for 32 byte alignment */
uint32_t unused[3];
};
#define EHCI_PAGE_SIZE 4096
/* Queue Head (QH). */
struct QH {
uint32_t qh_link;
#define QH_LINK_TERMINATE 1
#define QH_LINK_TYPE_ITD 0
#define QH_LINK_TYPE_QH 2
#define QH_LINK_TYPE_SITD 4
#define QH_LINK_TYPE_FSTN 6
uint32_t qh_endpt1;
#define QH_ENDPT1_RL(x) (((x) & 0xf) << 28) /* NAK Count Reload */
#define QH_ENDPT1_C(x) (((x) & 0x1) << 27) /* Control Endpoint Flag */
#define QH_ENDPT1_MAXPKTLEN(x) (((x) & 0x7ff) << 16) /* Maximum Packet Length */
#define QH_ENDPT1_H(x) (((x) & 0x1) << 15) /* Head of Reclamation List Flag */
#define QH_ENDPT1_DTC(x) (((x) & 0x1) << 14) /* Data Toggle Control */
#define QH_ENDPT1_DTC_IGNORE_QTD_TD 0x0
#define QH_ENDPT1_DTC_DT_FROM_QTD 0x1
#define QH_ENDPT1_EPS(x) (((x) & 0x3) << 12) /* Endpoint Speed */
#define QH_ENDPT1_EPS_FS 0x0
#define QH_ENDPT1_EPS_LS 0x1
#define QH_ENDPT1_EPS_HS 0x2
#define QH_ENDPT1_ENDPT(x) (((x) & 0xf) << 8) /* Endpoint Number */
#define QH_ENDPT1_I(x) (((x) & 0x1) << 7) /* Inactivate on Next Transaction */
#define QH_ENDPT1_DEVADDR(x) (((x) & 0x7f) << 0) /* Device Address */
uint32_t qh_endpt2;
#define QH_ENDPT2_MULT(x) (((x) & 0x3) << 30) /* High-Bandwidth Pipe Multiplier */
#define QH_ENDPT2_PORTNUM(x) (((x) & 0x7f) << 23) /* Port Number */
#define QH_ENDPT2_HUBADDR(x) (((x) & 0x7f) << 16) /* Hub Address */
#define QH_ENDPT2_UFCMASK(x) (((x) & 0xff) << 8) /* Split Completion Mask */
#define QH_ENDPT2_UFSMASK(x) (((x) & 0xff) << 0) /* Interrupt Schedule Mask */
uint32_t qh_curtd;
struct qTD qh_overlay;
/*
* Add dummy fill value to make the size of this struct
* aligned to 32 bytes
*/
union {
uint32_t fill[4];
void *buffer;
};
};
/* Tweak flags for EHCI, used to control operation */
enum {
/* don't use or_configflag in init */
EHCI_TWEAK_NO_INIT_CF = 1 << 0,
};
struct ehci_ctrl;
struct ehci_ops {
void (*set_usb_mode)(struct ehci_ctrl *ctrl);
int (*get_port_speed)(struct ehci_ctrl *ctrl, uint32_t reg);
void (*powerup_fixup)(struct ehci_ctrl *ctrl, uint32_t *status_reg,
uint32_t *reg);
uint32_t *(*get_portsc_register)(struct ehci_ctrl *ctrl, int port);
int (*init_after_reset)(struct ehci_ctrl *ctrl);
};
struct ehci_ctrl {
enum usb_init_type init;
struct ehci_hccr *hccr; /* R/O registers, not need for volatile */
struct ehci_hcor *hcor;
int rootdev;
uint16_t portreset;
struct QH qh_list __aligned(USB_DMA_MINALIGN);
struct QH periodic_queue __aligned(USB_DMA_MINALIGN);
uint32_t *periodic_list;
int periodic_schedules;
int ntds;
bool has_fsl_erratum_a005275; /* Freescale HS silicon quirk */
bool async_locked;
struct ehci_ops ops;
void *priv; /* client's private data */
};
/**
* ehci_set_controller_info() - Set up private data for the controller
*
* This function can be called in ehci_hcd_init() to tell the EHCI layer
* about the controller's private data pointer. Then in the above functions
* this can be accessed given the struct ehci_ctrl pointer. Also special
* EHCI operation methods can be provided if required
*
* @index: Controller number to set
* @priv: Controller pointer
* @ops: Controller operations, or NULL to use default
*/
void ehci_set_controller_priv(int index, void *priv,
const struct ehci_ops *ops);
/**
* ehci_get_controller_priv() - Get controller private data
*
* @index Controller number to get
* Return: controller pointer for this index
*/
void *ehci_get_controller_priv(int index);
/* Low level init functions */
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor);
int ehci_hcd_stop(int index);
int ehci_register(struct udevice *dev, struct ehci_hccr *hccr,
struct ehci_hcor *hcor, const struct ehci_ops *ops,
uint tweaks, enum usb_init_type init);
int ehci_deregister(struct udevice *dev);
extern struct dm_usb_ops ehci_usb_ops;
/* EHCI PHY functions */
int ehci_setup_phy(struct udevice *dev, struct phy *phy, int index);
int ehci_shutdown_phy(struct udevice *dev, struct phy *phy);
#include <linux/bitops.h>
#endif /* USB_EHCI_H */