arm: imx7d: add support for Compulab cl-som-imx7
Add initial support for Compulab cl-som-imx7 SoM.
The initial support includes:
- MMC
- eMMC
- SPI flash
- I2C
- FEC
- USB
- Serial console
Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
diff --git a/board/compulab/cl-som-imx7/common.c b/board/compulab/cl-som-imx7/common.c
new file mode 100644
index 0000000..5ee688a
--- /dev/null
+++ b/board/compulab/cl-som-imx7/common.c
@@ -0,0 +1,46 @@
+/*
+ * SPL/U-Boot common functions for CompuLab CL-SOM-iMX7 module
+ *
+ * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <asm-generic/gpio.h>
+#include "common.h"
+
+#ifdef CONFIG_SPI
+
+#define CL_SOM_IMX7_GPIO_SPI_CS IMX_GPIO_NR(4, 19)
+
+int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
+{
+ return CL_SOM_IMX7_GPIO_SPI_CS;
+}
+
+#endif /* CONFIG_SPI */
+
+#ifdef CONFIG_FSL_ESDHC
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ ret = !gpio_get_value(CL_SOM_IMX7_GPIO_USDHC1_CD);
+ break;
+ case USDHC3_BASE_ADDR:
+ ret = 1; /* Assume uSDHC3 emmc is always present */
+ break;
+ }
+
+ return ret;
+}
+
+#endif /* CONFIG_FSL_ESDHC */