| /* |
| * (C) Copyright 2000-2006 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| /*------------------------------------------------------------------------------+ */ |
| /* |
| * This source code has been made available to you by IBM on an AS-IS |
| * basis. Anyone receiving this source is licensed under IBM |
| * copyrights to use it in any way he or she deems fit, including |
| * copying it, modifying it, compiling it, and redistributing it either |
| * with or without modifications. No license under IBM patents or |
| * patent applications is to be implied by the copyright license. |
| * |
| * Any user of this software should understand that IBM cannot provide |
| * technical support for this software and will not be responsible for |
| * any consequences resulting from the use of this software. |
| * |
| * Any person who transfers this source code or any derivative work |
| * must include the IBM copyright notice, this paragraph, and the |
| * preceding two paragraphs in the transferred software. |
| * |
| * COPYRIGHT I B M CORPORATION 1995 |
| * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M |
| */ |
| /*------------------------------------------------------------------------------- */ |
| /* |
| * Travis Sawyer 15 September 2004 |
| * Added CONFIG_SERIAL_MULTI support |
| */ |
| #include <common.h> |
| #include <commproc.h> |
| #include <asm/processor.h> |
| #include <watchdog.h> |
| #include "vecnum.h" |
| |
| #ifdef CONFIG_SERIAL_MULTI |
| #include <serial.h> |
| #endif |
| |
| #ifdef CONFIG_SERIAL_SOFTWARE_FIFO |
| #include <malloc.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /*****************************************************************************/ |
| #ifdef CONFIG_IOP480 |
| |
| #define SPU_BASE 0x40000000 |
| |
| #define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */ |
| #define spu_LineStat_w 0x04 /* Line Status Register (Set) */ |
| #define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */ |
| #define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */ |
| #define spu_BRateDivh 0x10 /* Baud rate divisor high */ |
| #define spu_BRateDivl 0x14 /* Baud rate divisor low */ |
| #define spu_CtlReg 0x18 /* Control Register */ |
| #define spu_RxCmd 0x1c /* Rx Command Register */ |
| #define spu_TxCmd 0x20 /* Tx Command Register */ |
| #define spu_RxBuff 0x24 /* Rx data buffer */ |
| #define spu_TxBuff 0x24 /* Tx data buffer */ |
| |
| /*-----------------------------------------------------------------------------+ |
| | Line Status Register. |
| +-----------------------------------------------------------------------------*/ |
| #define asyncLSRport1 0x40000000 |
| #define asyncLSRport1set 0x40000004 |
| #define asyncLSRDataReady 0x80 |
| #define asyncLSRFramingError 0x40 |
| #define asyncLSROverrunError 0x20 |
| #define asyncLSRParityError 0x10 |
| #define asyncLSRBreakInterrupt 0x08 |
| #define asyncLSRTxHoldEmpty 0x04 |
| #define asyncLSRTxShiftEmpty 0x02 |
| |
| /*-----------------------------------------------------------------------------+ |
| | Handshake Status Register. |
| +-----------------------------------------------------------------------------*/ |
| #define asyncHSRport1 0x40000008 |
| #define asyncHSRport1set 0x4000000c |
| #define asyncHSRDsr 0x80 |
| #define asyncLSRCts 0x40 |
| |
| /*-----------------------------------------------------------------------------+ |
| | Control Register. |
| +-----------------------------------------------------------------------------*/ |
| #define asyncCRport1 0x40000018 |
| #define asyncCRNormal 0x00 |
| #define asyncCRLoopback 0x40 |
| #define asyncCRAutoEcho 0x80 |
| #define asyncCRDtr 0x20 |
| #define asyncCRRts 0x10 |
| #define asyncCRWordLength7 0x00 |
| #define asyncCRWordLength8 0x08 |
| #define asyncCRParityDisable 0x00 |
| #define asyncCRParityEnable 0x04 |
| #define asyncCREvenParity 0x00 |
| #define asyncCROddParity 0x02 |
| #define asyncCRStopBitsOne 0x00 |
| #define asyncCRStopBitsTwo 0x01 |
| #define asyncCRDisableDtrRts 0x00 |
| |
| /*-----------------------------------------------------------------------------+ |
| | Receiver Command Register. |
| +-----------------------------------------------------------------------------*/ |
| #define asyncRCRport1 0x4000001c |
| #define asyncRCRDisable 0x00 |
| #define asyncRCREnable 0x80 |
| #define asyncRCRIntDisable 0x00 |
| #define asyncRCRIntEnabled 0x20 |
| #define asyncRCRDMACh2 0x40 |
| #define asyncRCRDMACh3 0x60 |
| #define asyncRCRErrorInt 0x10 |
| #define asyncRCRPauseEnable 0x08 |
| |
| /*-----------------------------------------------------------------------------+ |
| | Transmitter Command Register. |
| +-----------------------------------------------------------------------------*/ |
| #define asyncTCRport1 0x40000020 |
| #define asyncTCRDisable 0x00 |
| #define asyncTCREnable 0x80 |
| #define asyncTCRIntDisable 0x00 |
| #define asyncTCRIntEnabled 0x20 |
| #define asyncTCRDMACh2 0x40 |
| #define asyncTCRDMACh3 0x60 |
| #define asyncTCRTxEmpty 0x10 |
| #define asyncTCRErrorInt 0x08 |
| #define asyncTCRStopPause 0x04 |
| #define asyncTCRBreakGen 0x02 |
| |
| /*-----------------------------------------------------------------------------+ |
| | Miscellanies defines. |
| +-----------------------------------------------------------------------------*/ |
| #define asyncTxBufferport1 0x40000024 |
| #define asyncRxBufferport1 0x40000024 |
| #define asyncDLABLsbport1 0x40000014 |
| #define asyncDLABMsbport1 0x40000010 |
| #define asyncXOFFchar 0x13 |
| #define asyncXONchar 0x11 |
| |
| /* |
| * Minimal serial functions needed to use one of the SMC ports |
| * as serial console interface. |
| */ |
| |
| int serial_init (void) |
| { |
| volatile char val; |
| unsigned short br_reg; |
| |
| br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1); |
| |
| /* |
| * Init onboard UART |
| */ |
| out8 (SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */ |
| out8 (SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */ |
| out8 (SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */ |
| out8 (SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */ |
| out8 (SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */ |
| out8 (SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */ |
| out8 (SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ |
| val = in8 (SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */ |
| |
| return (0); |
| } |
| |
| void serial_setbrg (void) |
| { |
| unsigned short br_reg; |
| |
| br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1); |
| |
| out8 (SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */ |
| out8 (SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */ |
| } |
| |
| void serial_putc (const char c) |
| { |
| if (c == '\n') |
| serial_putc ('\r'); |
| |
| /* load status from handshake register */ |
| if (in8 (SPU_BASE + spu_Handshk_rc) != 00) |
| out8 (SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ |
| |
| out8 (SPU_BASE + spu_TxBuff, c); /* Put char */ |
| |
| while ((in8 (SPU_BASE + spu_LineStat_rc) & 04) != 04) { |
| if (in8 (SPU_BASE + spu_Handshk_rc) != 00) |
| out8 (SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ |
| } |
| } |
| |
| void serial_puts (const char *s) |
| { |
| while (*s) { |
| serial_putc (*s++); |
| } |
| } |
| |
| int serial_getc () |
| { |
| unsigned char status = 0; |
| |
| while (1) { |
| status = in8 (asyncLSRport1); |
| if ((status & asyncLSRDataReady) != 0x0) { |
| break; |
| } |
| if ((status & ( asyncLSRFramingError | |
| asyncLSROverrunError | |
| asyncLSRParityError | |
| asyncLSRBreakInterrupt )) != 0) { |
| (void) out8 (asyncLSRport1, |
| asyncLSRFramingError | |
| asyncLSROverrunError | |
| asyncLSRParityError | |
| asyncLSRBreakInterrupt ); |
| } |
| } |
| return (0x000000ff & (int) in8 (asyncRxBufferport1)); |
| } |
| |
| int serial_tstc () |
| { |
| unsigned char status; |
| |
| status = in8 (asyncLSRport1); |
| if ((status & asyncLSRDataReady) != 0x0) { |
| return (1); |
| } |
| if ((status & ( asyncLSRFramingError | |
| asyncLSROverrunError | |
| asyncLSRParityError | |
| asyncLSRBreakInterrupt )) != 0) { |
| (void) out8 (asyncLSRport1, |
| asyncLSRFramingError | |
| asyncLSROverrunError | |
| asyncLSRParityError | |
| asyncLSRBreakInterrupt); |
| } |
| return 0; |
| } |
| |
| #endif /* CONFIG_IOP480 */ |
| |
| /*****************************************************************************/ |
| #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ |
| defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ |
| defined(CONFIG_440) |
| |
| #if defined(CONFIG_440) |
| #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ |
| defined(CONFIG_440EPX) || defined(CONFIG_440GRX) |
| #define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300 |
| #define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400 |
| #else |
| #define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200 |
| #define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300 |
| #endif |
| |
| #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) |
| #define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600 |
| #endif |
| |
| #if defined(CONFIG_440GP) |
| #define CR0_MASK 0x3fff0000 |
| #define CR0_EXTCLK_ENA 0x00600000 |
| #define CR0_UDIV_POS 16 |
| #define UDIV_SUBTRACT 1 |
| #define UART0_SDR cntrl0 |
| #define MFREG(a, d) d = mfdcr(a) |
| #define MTREG(a, d) mtdcr(a, d) |
| #else /* #if defined(CONFIG_440GP) */ |
| /* all other 440 PPC's access clock divider via sdr register */ |
| #define CR0_MASK 0xdfffffff |
| #define CR0_EXTCLK_ENA 0x00800000 |
| #define CR0_UDIV_POS 0 |
| #define UDIV_SUBTRACT 0 |
| #define UART0_SDR sdr_uart0 |
| #define UART1_SDR sdr_uart1 |
| #if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \ |
| defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \ |
| defined(CONFIG_440SP) || defined(CONFIG_440SPe) |
| #define UART2_SDR sdr_uart2 |
| #endif |
| #if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \ |
| defined(CONFIG_440GR) || defined(CONFIG_440GRx) |
| #define UART3_SDR sdr_uart3 |
| #endif |
| #define MFREG(a, d) mfsdr(a, d) |
| #define MTREG(a, d) mtsdr(a, d) |
| #endif /* #if defined(CONFIG_440GP) */ |
| #elif defined(CONFIG_405EP) || defined(CONFIG_405EZ) |
| #define UART0_BASE 0xef600300 |
| #define UART1_BASE 0xef600400 |
| #define UCR0_MASK 0x0000007f |
| #define UCR1_MASK 0x00007f00 |
| #define UCR0_UDIV_POS 0 |
| #define UCR1_UDIV_POS 8 |
| #define UDIV_MAX 127 |
| #else /* CONFIG_405GP || CONFIG_405CR */ |
| #define UART0_BASE 0xef600300 |
| #define UART1_BASE 0xef600400 |
| #define CR0_MASK 0x00001fff |
| #define CR0_EXTCLK_ENA 0x000000c0 |
| #define CR0_UDIV_POS 1 |
| #define UDIV_MAX 32 |
| #endif |
| |
| /* using serial port 0 or 1 as U-Boot console ? */ |
| #if defined(CONFIG_UART1_CONSOLE) |
| #define ACTING_UART0_BASE UART1_BASE |
| #define ACTING_UART1_BASE UART0_BASE |
| #else |
| #define ACTING_UART0_BASE UART0_BASE |
| #define ACTING_UART1_BASE UART1_BASE |
| #endif |
| |
| #if defined(CONFIG_SERIAL_MULTI) |
| #define UART_BASE dev_base |
| #else |
| #define UART_BASE ACTING_UART0_BASE |
| #endif |
| |
| #if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK) |
| #error "External serial clock not supported on AMCC PPC405EP!" |
| #endif |
| |
| #define UART_RBR 0x00 |
| #define UART_THR 0x00 |
| #define UART_IER 0x01 |
| #define UART_IIR 0x02 |
| #define UART_FCR 0x02 |
| #define UART_LCR 0x03 |
| #define UART_MCR 0x04 |
| #define UART_LSR 0x05 |
| #define UART_MSR 0x06 |
| #define UART_SCR 0x07 |
| #define UART_DLL 0x00 |
| #define UART_DLM 0x01 |
| |
| /*-----------------------------------------------------------------------------+ |
| | Line Status Register. |
| +-----------------------------------------------------------------------------*/ |
| /*#define asyncLSRport1 ACTING_UART0_BASE+0x05 */ |
| #define asyncLSRDataReady1 0x01 |
| #define asyncLSROverrunError1 0x02 |
| #define asyncLSRParityError1 0x04 |
| #define asyncLSRFramingError1 0x08 |
| #define asyncLSRBreakInterrupt1 0x10 |
| #define asyncLSRTxHoldEmpty1 0x20 |
| #define asyncLSRTxShiftEmpty1 0x40 |
| #define asyncLSRRxFifoError1 0x80 |
| |
| /*-----------------------------------------------------------------------------+ |
| | Miscellanies defines. |
| +-----------------------------------------------------------------------------*/ |
| /*#define asyncTxBufferport1 ACTING_UART0_BASE+0x00 */ |
| /*#define asyncRxBufferport1 ACTING_UART0_BASE+0x00 */ |
| |
| #ifdef CONFIG_SERIAL_SOFTWARE_FIFO |
| /*-----------------------------------------------------------------------------+ |
| | Fifo |
| +-----------------------------------------------------------------------------*/ |
| typedef struct { |
| char *rx_buffer; |
| ulong rx_put; |
| ulong rx_get; |
| } serial_buffer_t; |
| |
| volatile static serial_buffer_t buf_info; |
| #endif |
| |
| #if defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLOCK) |
| static void serial_divs (int baudrate, unsigned long *pudiv, |
| unsigned short *pbdiv) |
| { |
| sys_info_t sysinfo; |
| unsigned long div; /* total divisor udiv * bdiv */ |
| unsigned long umin; /* minimum udiv */ |
| unsigned short diff; /* smallest diff */ |
| unsigned long udiv; /* best udiv */ |
| unsigned short idiff; /* current diff */ |
| unsigned short ibdiv; /* current bdiv */ |
| unsigned long i; |
| unsigned long est; /* current estimate */ |
| |
| get_sys_info(&sysinfo); |
| |
| udiv = 32; /* Assume lowest possible serial clk */ |
| div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */ |
| umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */ |
| diff = 32; /* highest possible */ |
| |
| /* i is the test udiv value -- start with the largest |
| * possible (32) to minimize serial clock and constrain |
| * search to umin. |
| */ |
| for (i = 32; i > umin; i--) { |
| ibdiv = div / i; |
| est = i * ibdiv; |
| idiff = (est > div) ? (est-div) : (div-est); |
| if (idiff == 0) { |
| udiv = i; |
| break; /* can't do better */ |
| } else if (idiff < diff) { |
| udiv = i; /* best so far */ |
| diff = idiff; /* update lowest diff*/ |
| } |
| } |
| |
| *pudiv = udiv; |
| *pbdiv = div / udiv; |
| } |
| |
| #elif defined(CONFIG_405EZ) |
| |
| static void serial_divs (int baudrate, unsigned long *pudiv, |
| unsigned short *pbdiv) |
| { |
| sys_info_t sysinfo; |
| unsigned long div; /* total divisor udiv * bdiv */ |
| unsigned long umin; /* minimum udiv */ |
| unsigned short diff; /* smallest diff */ |
| unsigned long udiv; /* best udiv */ |
| unsigned short idiff; /* current diff */ |
| unsigned short ibdiv; /* current bdiv */ |
| unsigned long i; |
| unsigned long est; /* current estimate */ |
| unsigned long plloutb; |
| unsigned long cpr_pllc; |
| u32 reg; |
| |
| /* check the pll feedback source */ |
| mfcpr(cprpllc, cpr_pllc); |
| |
| get_sys_info(&sysinfo); |
| |
| plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ? |
| sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) * sysinfo.pllFbkDiv) / |
| sysinfo.pllFwdDivB); |
| udiv = 256; /* Assume lowest possible serial clk */ |
| div = plloutb / (16 * baudrate); /* total divisor */ |
| umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */ |
| diff = 256; /* highest possible */ |
| |
| /* i is the test udiv value -- start with the largest |
| * possible (256) to minimize serial clock and constrain |
| * search to umin. |
| */ |
| for (i = 256; i > umin; i--) { |
| ibdiv = div / i; |
| est = i * ibdiv; |
| idiff = (est > div) ? (est-div) : (div-est); |
| if (idiff == 0) { |
| udiv = i; |
| break; /* can't do better */ |
| } else if (idiff < diff) { |
| udiv = i; /* best so far */ |
| diff = idiff; /* update lowest diff*/ |
| } |
| } |
| |
| *pudiv = udiv; |
| mfcpr(cprperd0, reg); |
| reg &= ~0x0000ffff; |
| reg |= ((udiv - 0) << 8) | (udiv - 0); |
| mtcpr(cprperd0, reg); |
| *pbdiv = div / udiv; |
| } |
| #endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */ |
| |
| /* |
| * Minimal serial functions needed to use one of the SMC ports |
| * as serial console interface. |
| */ |
| |
| #if defined(CONFIG_440) |
| #if defined(CONFIG_SERIAL_MULTI) |
| int serial_init_dev (unsigned long dev_base) |
| #else |
| int serial_init(void) |
| #endif |
| { |
| unsigned long reg; |
| unsigned long udiv; |
| unsigned short bdiv; |
| volatile char val; |
| #ifdef CFG_EXT_SERIAL_CLOCK |
| unsigned long tmp; |
| #endif |
| |
| MFREG(UART0_SDR, reg); |
| reg &= ~CR0_MASK; |
| |
| #ifdef CFG_EXT_SERIAL_CLOCK |
| reg |= CR0_EXTCLK_ENA; |
| udiv = 1; |
| tmp = gd->baudrate * 16; |
| bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp; |
| #else |
| /* For 440, the cpu clock is on divider chain A, UART on divider |
| * chain B ... so cpu clock is irrelevant. Get the "optimized" |
| * values that are subject to the 1/2 opb clock constraint |
| */ |
| serial_divs (gd->baudrate, &udiv, &bdiv); |
| #endif |
| |
| reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */ |
| |
| /* |
| * Configure input clock to baudrate generator for all |
| * available serial ports here |
| */ |
| MTREG(UART0_SDR, reg); |
| #if defined(UART1_SDR) |
| MTREG(UART1_SDR, reg); |
| #endif |
| #if defined(UART2_SDR) |
| MTREG(UART2_SDR, reg); |
| #endif |
| #if defined(UART3_SDR) |
| MTREG(UART3_SDR, reg); |
| #endif |
| |
| out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */ |
| out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */ |
| out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */ |
| out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ |
| out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */ |
| out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */ |
| val = in8(UART_BASE + UART_LSR); /* clear line status */ |
| val = in8(UART_BASE + UART_RBR); /* read receive buffer */ |
| out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */ |
| out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */ |
| |
| return (0); |
| } |
| |
| #else /* !defined(CONFIG_440) */ |
| |
| #if defined(CONFIG_SERIAL_MULTI) |
| int serial_init_dev (unsigned long dev_base) |
| #else |
| int serial_init (void) |
| #endif |
| { |
| unsigned long reg; |
| unsigned long tmp; |
| unsigned long clk; |
| unsigned long udiv; |
| unsigned short bdiv; |
| volatile char val; |
| |
| #if defined(CONFIG_405EZ) |
| serial_divs(gd->baudrate, &udiv, &bdiv); |
| clk = tmp = reg = 0; |
| #else |
| #ifdef CONFIG_405EP |
| reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK); |
| clk = gd->cpu_clk; |
| tmp = CFG_BASE_BAUD * 16; |
| udiv = (clk + tmp / 2) / tmp; |
| if (udiv > UDIV_MAX) /* max. n bits for udiv */ |
| udiv = UDIV_MAX; |
| reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */ |
| reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */ |
| mtdcr (cpc0_ucr, reg); |
| #else /* CONFIG_405EP */ |
| reg = mfdcr(cntrl0) & ~CR0_MASK; |
| #ifdef CFG_EXT_SERIAL_CLOCK |
| clk = CFG_EXT_SERIAL_CLOCK; |
| udiv = 1; |
| reg |= CR0_EXTCLK_ENA; |
| #else |
| clk = gd->cpu_clk; |
| #ifdef CFG_405_UART_ERRATA_59 |
| udiv = 31; /* Errata 59: stuck at 31 */ |
| #else |
| tmp = CFG_BASE_BAUD * 16; |
| udiv = (clk + tmp / 2) / tmp; |
| if (udiv > UDIV_MAX) /* max. n bits for udiv */ |
| udiv = UDIV_MAX; |
| #endif |
| #endif |
| reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */ |
| mtdcr (cntrl0, reg); |
| #endif /* CONFIG_405EP */ |
| tmp = gd->baudrate * udiv * 16; |
| bdiv = (clk + tmp / 2) / tmp; |
| #endif /* CONFIG_405EZ */ |
| |
| out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */ |
| out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */ |
| out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */ |
| out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ |
| out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */ |
| out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */ |
| val = in8(UART_BASE + UART_LSR); /* clear line status */ |
| val = in8(UART_BASE + UART_RBR); /* read receive buffer */ |
| out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */ |
| out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */ |
| |
| return (0); |
| } |
| |
| #endif /* if defined(CONFIG_440) */ |
| |
| #if defined(CONFIG_SERIAL_MULTI) |
| void serial_setbrg_dev (unsigned long dev_base) |
| #else |
| void serial_setbrg (void) |
| #endif |
| { |
| #if defined(CONFIG_SERIAL_MULTI) |
| serial_init_dev(dev_base); |
| #else |
| serial_init(); |
| #endif |
| } |
| |
| #if defined(CONFIG_SERIAL_MULTI) |
| void serial_putc_dev (unsigned long dev_base, const char c) |
| #else |
| void serial_putc (const char c) |
| #endif |
| { |
| int i; |
| |
| if (c == '\n') |
| #if defined(CONFIG_SERIAL_MULTI) |
| serial_putc_dev (dev_base, '\r'); |
| #else |
| serial_putc ('\r'); |
| #endif |
| |
| /* check THRE bit, wait for transmiter available */ |
| for (i = 1; i < 3500; i++) { |
| if ((in8 (UART_BASE + UART_LSR) & 0x20) == 0x20) |
| break; |
| udelay (100); |
| } |
| out8 (UART_BASE + UART_THR, c); /* put character out */ |
| } |
| |
| #if defined(CONFIG_SERIAL_MULTI) |
| void serial_puts_dev (unsigned long dev_base, const char *s) |
| #else |
| void serial_puts (const char *s) |
| #endif |
| { |
| while (*s) { |
| #if defined(CONFIG_SERIAL_MULTI) |
| serial_putc_dev (dev_base, *s++); |
| #else |
| serial_putc (*s++); |
| #endif |
| } |
| } |
| |
| #if defined(CONFIG_SERIAL_MULTI) |
| int serial_getc_dev (unsigned long dev_base) |
| #else |
| int serial_getc (void) |
| #endif |
| { |
| unsigned char status = 0; |
| |
| while (1) { |
| #if defined(CONFIG_HW_WATCHDOG) |
| WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ |
| #endif /* CONFIG_HW_WATCHDOG */ |
| status = in8 (UART_BASE + UART_LSR); |
| if ((status & asyncLSRDataReady1) != 0x0) { |
| break; |
| } |
| if ((status & ( asyncLSRFramingError1 | |
| asyncLSROverrunError1 | |
| asyncLSRParityError1 | |
| asyncLSRBreakInterrupt1 )) != 0) { |
| out8 (UART_BASE + UART_LSR, |
| asyncLSRFramingError1 | |
| asyncLSROverrunError1 | |
| asyncLSRParityError1 | |
| asyncLSRBreakInterrupt1); |
| } |
| } |
| return (0x000000ff & (int) in8 (UART_BASE)); |
| } |
| |
| #if defined(CONFIG_SERIAL_MULTI) |
| int serial_tstc_dev (unsigned long dev_base) |
| #else |
| int serial_tstc (void) |
| #endif |
| { |
| unsigned char status; |
| |
| status = in8 (UART_BASE + UART_LSR); |
| if ((status & asyncLSRDataReady1) != 0x0) { |
| return (1); |
| } |
| if ((status & ( asyncLSRFramingError1 | |
| asyncLSROverrunError1 | |
| asyncLSRParityError1 | |
| asyncLSRBreakInterrupt1 )) != 0) { |
| out8 (UART_BASE + UART_LSR, |
| asyncLSRFramingError1 | |
| asyncLSROverrunError1 | |
| asyncLSRParityError1 | |
| asyncLSRBreakInterrupt1); |
| } |
| return 0; |
| } |
| |
| #ifdef CONFIG_SERIAL_SOFTWARE_FIFO |
| |
| void serial_isr (void *arg) |
| { |
| int space; |
| int c; |
| const int rx_get = buf_info.rx_get; |
| int rx_put = buf_info.rx_put; |
| |
| if (rx_get <= rx_put) { |
| space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get); |
| } else { |
| space = rx_get - rx_put; |
| } |
| while (serial_tstc_dev (ACTING_UART0_BASE)) { |
| c = serial_getc_dev (ACTING_UART0_BASE); |
| if (space) { |
| buf_info.rx_buffer[rx_put++] = c; |
| space--; |
| } |
| if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) |
| rx_put = 0; |
| if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) { |
| /* Stop flow by setting RTS inactive */ |
| out8 (ACTING_UART0_BASE + UART_MCR, |
| in8 (ACTING_UART0_BASE + UART_MCR) & (0xFF ^ 0x02)); |
| } |
| } |
| buf_info.rx_put = rx_put; |
| } |
| |
| void serial_buffered_init (void) |
| { |
| serial_puts ("Switching to interrupt driven serial input mode.\n"); |
| buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO); |
| buf_info.rx_put = 0; |
| buf_info.rx_get = 0; |
| |
| if (in8 (ACTING_UART0_BASE + UART_MSR) & 0x10) { |
| serial_puts ("Check CTS signal present on serial port: OK.\n"); |
| } else { |
| serial_puts ("WARNING: CTS signal not present on serial port.\n"); |
| } |
| |
| irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ , |
| serial_isr /*interrupt_handler_t *handler */ , |
| (void *) &buf_info /*void *arg */ ); |
| |
| /* Enable "RX Data Available" Interrupt on UART */ |
| /* out8(ACTING_UART0_BASE + UART_IER, in8(ACTING_UART0_BASE + UART_IER) |0x01); */ |
| out8 (ACTING_UART0_BASE + UART_IER, 0x01); |
| /* Set DTR active */ |
| out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x01); |
| /* Start flow by setting RTS active */ |
| out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x02); |
| /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */ |
| out8 (ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1); |
| } |
| |
| void serial_buffered_putc (const char c) |
| { |
| /* Wait for CTS */ |
| #if defined(CONFIG_HW_WATCHDOG) |
| while (!(in8 (ACTING_UART0_BASE + UART_MSR) & 0x10)) |
| WATCHDOG_RESET (); |
| #else |
| while (!(in8 (ACTING_UART0_BASE + UART_MSR) & 0x10)); |
| #endif |
| serial_putc (c); |
| } |
| |
| void serial_buffered_puts (const char *s) |
| { |
| serial_puts (s); |
| } |
| |
| int serial_buffered_getc (void) |
| { |
| int space; |
| int c; |
| int rx_get = buf_info.rx_get; |
| int rx_put; |
| |
| #if defined(CONFIG_HW_WATCHDOG) |
| while (rx_get == buf_info.rx_put) |
| WATCHDOG_RESET (); |
| #else |
| while (rx_get == buf_info.rx_put); |
| #endif |
| c = buf_info.rx_buffer[rx_get++]; |
| if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO) |
| rx_get = 0; |
| buf_info.rx_get = rx_get; |
| |
| rx_put = buf_info.rx_put; |
| if (rx_get <= rx_put) { |
| space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get); |
| } else { |
| space = rx_get - rx_put; |
| } |
| if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) { |
| /* Start flow by setting RTS active */ |
| out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x02); |
| } |
| |
| return c; |
| } |
| |
| int serial_buffered_tstc (void) |
| { |
| return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0; |
| } |
| |
| #endif /* CONFIG_SERIAL_SOFTWARE_FIFO */ |
| |
| #if defined(CONFIG_CMD_KGDB) |
| /* |
| AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port |
| number 0 or number 1 |
| - if CONFIG_KGDB_SER_INDEX = 1 => serial port number 0 : |
| configuration has been already done |
| - if CONFIG_KGDB_SER_INDEX = 2 => serial port number 1 : |
| configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE |
| */ |
| #if (CONFIG_KGDB_SER_INDEX & 2) |
| void kgdb_serial_init (void) |
| { |
| volatile char val; |
| unsigned short br_reg; |
| |
| get_clocks (); |
| br_reg = (((((gd->cpu_clk / 16) / 18) * 10) / CONFIG_KGDB_BAUDRATE) + |
| 5) / 10; |
| /* |
| * Init onboard 16550 UART |
| */ |
| out8 (ACTING_UART1_BASE + UART_LCR, 0x80); /* set DLAB bit */ |
| out8 (ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */ |
| out8 (ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */ |
| out8 (ACTING_UART1_BASE + UART_LCR, 0x03); /* line control 8 bits no parity */ |
| out8 (ACTING_UART1_BASE + UART_FCR, 0x00); /* disable FIFO */ |
| out8 (ACTING_UART1_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */ |
| val = in8 (ACTING_UART1_BASE + UART_LSR); /* clear line status */ |
| val = in8 (ACTING_UART1_BASE + UART_RBR); /* read receive buffer */ |
| out8 (ACTING_UART1_BASE + UART_SCR, 0x00); /* set scratchpad */ |
| out8 (ACTING_UART1_BASE + UART_IER, 0x00); /* set interrupt enable reg */ |
| } |
| |
| void putDebugChar (const char c) |
| { |
| if (c == '\n') |
| serial_putc ('\r'); |
| |
| out8 (ACTING_UART1_BASE + UART_THR, c); /* put character out */ |
| |
| /* check THRE bit, wait for transfer done */ |
| while ((in8 (ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20); |
| } |
| |
| void putDebugStr (const char *s) |
| { |
| while (*s) { |
| serial_putc (*s++); |
| } |
| } |
| |
| int getDebugChar (void) |
| { |
| unsigned char status = 0; |
| |
| while (1) { |
| status = in8 (ACTING_UART1_BASE + UART_LSR); |
| if ((status & asyncLSRDataReady1) != 0x0) { |
| break; |
| } |
| if ((status & ( asyncLSRFramingError1 | |
| asyncLSROverrunError1 | |
| asyncLSRParityError1 | |
| asyncLSRBreakInterrupt1 )) != 0) { |
| out8 (ACTING_UART1_BASE + UART_LSR, |
| asyncLSRFramingError1 | |
| asyncLSROverrunError1 | |
| asyncLSRParityError1 | |
| asyncLSRBreakInterrupt1); |
| } |
| } |
| return (0x000000ff & (int) in8 (ACTING_UART1_BASE)); |
| } |
| |
| void kgdb_interruptible (int yes) |
| { |
| return; |
| } |
| |
| #else /* ! (CONFIG_KGDB_SER_INDEX & 2) */ |
| |
| void kgdb_serial_init (void) |
| { |
| serial_printf ("[on serial] "); |
| } |
| |
| void putDebugChar (int c) |
| { |
| serial_putc (c); |
| } |
| |
| void putDebugStr (const char *str) |
| { |
| serial_puts (str); |
| } |
| |
| int getDebugChar (void) |
| { |
| return serial_getc (); |
| } |
| |
| void kgdb_interruptible (int yes) |
| { |
| return; |
| } |
| #endif /* (CONFIG_KGDB_SER_INDEX & 2) */ |
| #endif |
| |
| |
| #if defined(CONFIG_SERIAL_MULTI) |
| int serial0_init(void) |
| { |
| return (serial_init_dev(UART0_BASE)); |
| } |
| |
| int serial1_init(void) |
| { |
| return (serial_init_dev(UART1_BASE)); |
| } |
| void serial0_setbrg (void) |
| { |
| serial_setbrg_dev(UART0_BASE); |
| } |
| void serial1_setbrg (void) |
| { |
| serial_setbrg_dev(UART1_BASE); |
| } |
| |
| void serial0_putc(const char c) |
| { |
| serial_putc_dev(UART0_BASE,c); |
| } |
| |
| void serial1_putc(const char c) |
| { |
| serial_putc_dev(UART1_BASE, c); |
| } |
| void serial0_puts(const char *s) |
| { |
| serial_puts_dev(UART0_BASE, s); |
| } |
| |
| void serial1_puts(const char *s) |
| { |
| serial_puts_dev(UART1_BASE, s); |
| } |
| |
| int serial0_getc(void) |
| { |
| return(serial_getc_dev(UART0_BASE)); |
| } |
| |
| int serial1_getc(void) |
| { |
| return(serial_getc_dev(UART1_BASE)); |
| } |
| int serial0_tstc(void) |
| { |
| return (serial_tstc_dev(UART0_BASE)); |
| } |
| |
| int serial1_tstc(void) |
| { |
| return (serial_tstc_dev(UART1_BASE)); |
| } |
| |
| struct serial_device serial0_device = |
| { |
| "serial0", |
| "UART0", |
| serial0_init, |
| serial0_setbrg, |
| serial0_getc, |
| serial0_tstc, |
| serial0_putc, |
| serial0_puts, |
| }; |
| |
| struct serial_device serial1_device = |
| { |
| "serial1", |
| "UART1", |
| serial1_init, |
| serial1_setbrg, |
| serial1_getc, |
| serial1_tstc, |
| serial1_putc, |
| serial1_puts, |
| }; |
| #endif /* CONFIG_SERIAL_MULTI */ |
| |
| #endif /* CONFIG_405GP || CONFIG_405CR */ |