blob: a438baf542c22588ce6d54b65e332095247abd3a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
* Author: Wadim Egorov <w.egorov@phytec.de>
*
* Product homepage:
* https://www.phytec.com/product/phyboard-am62x
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "k3-am625.dtsi"
#include "k3-am62-phycore-som.dtsi"
/ {
compatible = "phytec,am625-phyboard-lyra-rdk",
"phytec,am62-phycore-som", "ti,am625";
model = "PHYTEC phyBOARD-Lyra AM625";
aliases {
serial2 = &main_uart0;
serial3 = &main_uart1;
mmc1 = &sdhci1;
usb0 = &usb0;
usb1 = &usb1;
ethernet1 = &cpsw_port2;
};
can_tc1: can-phy0 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
max-bitrate = <5000000>;
standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
};
keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins_default>;
key-home {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>;
};
key-menu {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
led-1 {
gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
led-2 {
gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
};
};
vcc_3v3_mmc: regulator-vcc-3v3-mmc {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3_MMC";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
};
&main_pmx0 {
gpio_keys_pins_default: gpio-keys-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
>;
};
gpio_exp_int_pins_default: gpio-exp-int-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
>;
};
main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
>;
};
main_mcan0_pins_default: main-mcan0-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */
AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */
>;
};
main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */
AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */
AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
>;
};
main_rgmii2_pins_default: main-rgmii2-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
>;
};
main_uart0_pins_default: main-uart0-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
>;
};
main_uart1_pins_default: main-uart1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */
AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
>;
};
main_usb1_pins_default: main-usb1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
>;
};
user_leds_pins_default: user-leds-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */
>;
};
};
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
};
&cpsw_port2 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy3>;
};
&cpsw3g_mdio {
cpsw3g_phy3: ethernet-phy@3 {
compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
reg = <3>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
&main_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
status = "okay";
gpio_exp: gpio-expander@21 {
pinctrl-names = "default";
pinctrl-0 = <&gpio_exp_int_pins_default>;
compatible = "nxp,pcf8574";
reg = <0x21>;
interrupt-parent = <&main_gpio1>;
interrupts = <49 0>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
"GPIO2_LED2", "GPIO3_LVDS_GPIO",
"GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
"GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
};
eeprom@51 {
compatible = "atmel,24c02";
pagesize = <16>;
reg = <0x51>;
};
};
&main_mcan0 {
pinctrl-names = "default";
pinctrl-0 = <&main_mcan0_pins_default>;
phys = <&can_tc1>;
status = "okay";
};
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
status = "okay";
};
&main_uart1 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart1_pins_default>;
/* Main UART1 may be used by TIFS firmware */
status = "okay";
};
&sdhci1 {
vmmc-supply = <&vcc_3v3_mmc>;
vqmmc-supply = <&vddshv5_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
ti,driver-strength-ohm = <50>;
disable-wp;
no-1-8-v;
status = "okay";
};
&usbss0 {
ti,vbus-divider;
status = "okay";
};
&usbss1 {
ti,vbus-divider;
status = "okay";
};
&usb0 {
dr_mode = "peripheral";
};
&usb1 {
dr_mode = "host";
pinctrl-names = "default";
pinctrl-0 = <&main_usb1_pins_default>;
};