| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd |
| * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. |
| * Author: Finley Xiao <finley.xiao@rock-chips.com> |
| */ |
| |
| #include <common.h> |
| #include <bitfield.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <syscon.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/cru_rv1126.h> |
| #include <asm/arch-rockchip/grf_rv1126.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <dm/device-internal.h> |
| #include <dm/lists.h> |
| #include <dt-bindings/clock/rockchip,rv1126-cru.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define RV1126_CPUCLK_RATE(_rate, _aclk_div, _pclk_div) \ |
| { \ |
| .rate = _rate##U, \ |
| .aclk_div = _aclk_div, \ |
| .pclk_div = _pclk_div, \ |
| } |
| |
| #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) |
| |
| static struct rockchip_cpu_rate_table rv1126_cpu_rates[] = { |
| RV1126_CPUCLK_RATE(1200000000, 1, 5), |
| RV1126_CPUCLK_RATE(1008000000, 1, 5), |
| RV1126_CPUCLK_RATE(816000000, 1, 3), |
| RV1126_CPUCLK_RATE(600000000, 1, 3), |
| RV1126_CPUCLK_RATE(408000000, 1, 1), |
| }; |
| |
| static struct rockchip_pll_rate_table rv1126_pll_rates[] = { |
| /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */ |
| RK3036_PLL_RATE(1600000000, 3, 200, 1, 1, 1, 0), |
| RK3036_PLL_RATE(1400000000, 3, 350, 2, 1, 1, 0), |
| RK3036_PLL_RATE(1200000000, 1, 100, 2, 1, 1, 0), |
| RK3036_PLL_RATE(1188000000, 1, 99, 2, 1, 1, 0), |
| RK3036_PLL_RATE(1100000000, 3, 275, 2, 1, 1, 0), |
| RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0), |
| RK3036_PLL_RATE(1000000000, 3, 250, 2, 1, 1, 0), |
| RK3036_PLL_RATE(816000000, 1, 68, 2, 1, 1, 0), |
| RK3036_PLL_RATE(800000000, 3, 200, 2, 1, 1, 0), |
| RK3036_PLL_RATE(600000000, 1, 100, 4, 1, 1, 0), |
| RK3036_PLL_RATE(594000000, 1, 99, 4, 1, 1, 0), |
| RK3036_PLL_RATE(500000000, 1, 125, 6, 1, 1, 0), |
| RK3036_PLL_RATE(200000000, 1, 100, 6, 2, 1, 0), |
| RK3036_PLL_RATE(100000000, 1, 100, 6, 4, 1, 0), |
| { /* sentinel */ }, |
| }; |
| |
| static struct rockchip_pll_clock rv1126_pll_clks[] = { |
| [APLL] = PLL(pll_rk3328, PLL_APLL, RV1126_PLL_CON(0), |
| RV1126_MODE_CON, 0, 10, 0, rv1126_pll_rates), |
| [DPLL] = PLL(pll_rk3328, PLL_DPLL, RV1126_PLL_CON(8), |
| RV1126_MODE_CON, 2, 10, 0, NULL), |
| [CPLL] = PLL(pll_rk3328, PLL_CPLL, RV1126_PLL_CON(16), |
| RV1126_MODE_CON, 4, 10, 0, rv1126_pll_rates), |
| [HPLL] = PLL(pll_rk3328, PLL_HPLL, RV1126_PLL_CON(24), |
| RV1126_MODE_CON, 6, 10, 0, rv1126_pll_rates), |
| [GPLL] = PLL(pll_rk3328, PLL_GPLL, RV1126_PMU_PLL_CON(0), |
| RV1126_PMU_MODE, 0, 10, 0, rv1126_pll_rates), |
| }; |
| |
| static ulong rv1126_gpll_set_rate(struct rv1126_clk_priv *priv, |
| struct rv1126_pmuclk_priv *pmu_priv, |
| ulong rate); |
| /* |
| * |
| * rational_best_approximation(31415, 10000, |
| * (1 << 8) - 1, (1 << 5) - 1, &n, &d); |
| * |
| * you may look at given_numerator as a fixed point number, |
| * with the fractional part size described in given_denominator. |
| * |
| * for theoretical background, see: |
| * http://en.wikipedia.org/wiki/Continued_fraction |
| */ |
| static void rational_best_approximation(unsigned long given_numerator, |
| unsigned long given_denominator, |
| unsigned long max_numerator, |
| unsigned long max_denominator, |
| unsigned long *best_numerator, |
| unsigned long *best_denominator) |
| { |
| unsigned long n, d, n0, d0, n1, d1; |
| |
| n = given_numerator; |
| d = given_denominator; |
| n0 = 0; |
| d1 = 0; |
| n1 = 1; |
| d0 = 1; |
| for (;;) { |
| unsigned long t, a; |
| |
| if (n1 > max_numerator || d1 > max_denominator) { |
| n1 = n0; |
| d1 = d0; |
| break; |
| } |
| if (d == 0) |
| break; |
| t = d; |
| a = n / d; |
| d = n % d; |
| n = t; |
| t = n0 + a * n1; |
| n0 = n1; |
| n1 = t; |
| t = d0 + a * d1; |
| d0 = d1; |
| d1 = t; |
| } |
| *best_numerator = n1; |
| *best_denominator = d1; |
| } |
| |
| static ulong rv1126_gpll_get_pmuclk(struct rv1126_pmuclk_priv *priv) |
| { |
| return rockchip_pll_get_rate(&rv1126_pll_clks[GPLL], |
| priv->pmucru, GPLL); |
| } |
| |
| static ulong rv1126_gpll_set_pmuclk(struct rv1126_pmuclk_priv *pmu_priv, ulong rate) |
| { |
| struct udevice *cru_dev; |
| struct rv1126_clk_priv *priv; |
| int ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_CLK, |
| DM_DRIVER_GET(rockchip_rv1126_cru), |
| &cru_dev); |
| if (ret) { |
| printf("%s: could not find cru device\n", __func__); |
| return ret; |
| } |
| priv = dev_get_priv(cru_dev); |
| |
| if (rv1126_gpll_set_rate(priv, pmu_priv, rate)) { |
| printf("%s: failed to set gpll rate %lu\n", __func__, rate); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static ulong rv1126_rtc32k_get_pmuclk(struct rv1126_pmuclk_priv *priv) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| unsigned long m, n; |
| u32 fracdiv; |
| |
| fracdiv = readl(&pmucru->pmu_clksel_con[13]); |
| m = fracdiv & CLK_RTC32K_FRAC_NUMERATOR_MASK; |
| m >>= CLK_RTC32K_FRAC_NUMERATOR_SHIFT; |
| n = fracdiv & CLK_RTC32K_FRAC_DENOMINATOR_MASK; |
| n >>= CLK_RTC32K_FRAC_DENOMINATOR_SHIFT; |
| |
| return OSC_HZ * m / n; |
| } |
| |
| static ulong rv1126_rtc32k_set_pmuclk(struct rv1126_pmuclk_priv *priv, |
| ulong rate) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| unsigned long m, n, val; |
| |
| rk_clrsetreg(&pmucru->pmu_clksel_con[0], RTC32K_SEL_MASK, |
| RTC32K_SEL_OSC0_DIV32K << RTC32K_SEL_SHIFT); |
| |
| rational_best_approximation(rate, OSC_HZ, |
| GENMASK(16 - 1, 0), |
| GENMASK(16 - 1, 0), |
| &m, &n); |
| val = m << CLK_RTC32K_FRAC_NUMERATOR_SHIFT | n; |
| writel(val, &pmucru->pmu_clksel_con[13]); |
| |
| return rv1126_rtc32k_get_pmuclk(priv); |
| } |
| |
| static ulong rv1126_i2c_get_pmuclk(struct rv1126_pmuclk_priv *priv, |
| ulong clk_id) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| u32 div, con; |
| |
| switch (clk_id) { |
| case CLK_I2C0: |
| con = readl(&pmucru->pmu_clksel_con[2]); |
| div = (con & CLK_I2C0_DIV_MASK) >> CLK_I2C0_DIV_SHIFT; |
| break; |
| case CLK_I2C2: |
| con = readl(&pmucru->pmu_clksel_con[3]); |
| div = (con & CLK_I2C1_DIV_MASK) >> CLK_I2C1_DIV_SHIFT; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_i2c_set_pmuclk(struct rv1126_pmuclk_priv *priv, |
| ulong clk_id, ulong rate) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 127); |
| |
| switch (clk_id) { |
| case CLK_I2C0: |
| rk_clrsetreg(&pmucru->pmu_clksel_con[2], CLK_I2C0_DIV_MASK, |
| (src_clk_div - 1) << CLK_I2C0_DIV_SHIFT); |
| break; |
| case CLK_I2C2: |
| rk_clrsetreg(&pmucru->pmu_clksel_con[3], CLK_I2C2_DIV_MASK, |
| (src_clk_div - 1) << CLK_I2C2_DIV_SHIFT); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return rv1126_i2c_get_pmuclk(priv, clk_id); |
| } |
| |
| static ulong rv1126_pwm_get_pmuclk(struct rv1126_pmuclk_priv *priv, |
| ulong clk_id) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| u32 div, sel, con; |
| |
| switch (clk_id) { |
| case CLK_PWM0: |
| con = readl(&pmucru->pmu_clksel_con[6]); |
| sel = (con & CLK_PWM0_SEL_MASK) >> CLK_PWM0_SEL_SHIFT; |
| div = (con & CLK_PWM0_DIV_MASK) >> CLK_PWM0_DIV_SHIFT; |
| if (sel == CLK_PWM0_SEL_XIN24M) |
| return OSC_HZ; |
| break; |
| case CLK_PWM1: |
| con = readl(&pmucru->pmu_clksel_con[6]); |
| sel = (con & CLK_PWM1_SEL_MASK) >> CLK_PWM1_SEL_SHIFT; |
| div = (con & CLK_PWM1_DIV_MASK) >> CLK_PWM1_DIV_SHIFT; |
| if (sel == CLK_PWM1_SEL_XIN24M) |
| return OSC_HZ; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_pwm_set_pmuclk(struct rv1126_pmuclk_priv *priv, |
| ulong clk_id, ulong rate) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| int src_clk_div; |
| |
| switch (clk_id) { |
| case CLK_PWM0: |
| if (rate == OSC_HZ) { |
| rk_clrsetreg(&pmucru->pmu_clksel_con[6], |
| CLK_PWM0_SEL_MASK, |
| CLK_PWM0_SEL_XIN24M << CLK_PWM0_SEL_SHIFT); |
| rk_clrsetreg(&pmucru->pmu_clksel_con[6], |
| CLK_PWM0_DIV_MASK, 0); |
| } else { |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 127); |
| rk_clrsetreg(&pmucru->pmu_clksel_con[6], |
| CLK_PWM0_DIV_MASK, |
| (src_clk_div - 1) << CLK_PWM0_DIV_SHIFT); |
| rk_clrsetreg(&pmucru->pmu_clksel_con[6], |
| CLK_PWM0_SEL_MASK, |
| CLK_PWM0_SEL_GPLL << CLK_PWM0_SEL_SHIFT); |
| } |
| break; |
| case CLK_PWM1: |
| if (rate == OSC_HZ) { |
| rk_clrsetreg(&pmucru->pmu_clksel_con[6], |
| CLK_PWM1_SEL_MASK, |
| CLK_PWM1_SEL_XIN24M << CLK_PWM1_SEL_SHIFT); |
| rk_clrsetreg(&pmucru->pmu_clksel_con[6], |
| CLK_PWM1_DIV_MASK, 0); |
| } else { |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 127); |
| rk_clrsetreg(&pmucru->pmu_clksel_con[6], |
| CLK_PWM1_DIV_MASK, |
| (src_clk_div - 1) << CLK_PWM1_DIV_SHIFT); |
| rk_clrsetreg(&pmucru->pmu_clksel_con[6], |
| CLK_PWM1_SEL_MASK, |
| CLK_PWM1_SEL_GPLL << CLK_PWM1_SEL_SHIFT); |
| } |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return rv1126_pwm_get_pmuclk(priv, clk_id); |
| } |
| |
| static ulong rv1126_spi_get_pmuclk(struct rv1126_pmuclk_priv *priv) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| u32 div, con; |
| |
| con = readl(&pmucru->pmu_clksel_con[9]); |
| div = (con & CLK_SPI0_DIV_MASK) >> CLK_SPI0_DIV_SHIFT; |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_spi_set_pmuclk(struct rv1126_pmuclk_priv *priv, |
| ulong rate) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 127); |
| |
| rk_clrsetreg(&pmucru->pmu_clksel_con[9], |
| CLK_SPI0_SEL_MASK | CLK_SPI0_DIV_MASK, |
| CLK_SPI0_SEL_GPLL << CLK_SPI0_SEL_SHIFT | |
| (src_clk_div - 1) << CLK_SPI0_DIV_SHIFT); |
| |
| return rv1126_spi_get_pmuclk(priv); |
| } |
| |
| static ulong rv1126_pdpmu_get_pmuclk(struct rv1126_pmuclk_priv *priv) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| u32 div, con; |
| |
| con = readl(&pmucru->pmu_clksel_con[1]); |
| div = (con & PCLK_PDPMU_DIV_MASK) >> PCLK_PDPMU_DIV_SHIFT; |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_pdpmu_set_pmuclk(struct rv1126_pmuclk_priv *priv, |
| ulong rate) |
| { |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| |
| rk_clrsetreg(&pmucru->pmu_clksel_con[1], |
| PCLK_PDPMU_DIV_MASK, |
| (src_clk_div - 1) << PCLK_PDPMU_DIV_SHIFT); |
| |
| return rv1126_pdpmu_get_pmuclk(priv); |
| } |
| |
| static ulong rv1126_pmuclk_get_rate(struct clk *clk) |
| { |
| struct rv1126_pmuclk_priv *priv = dev_get_priv(clk->dev); |
| ulong rate = 0; |
| |
| if (!priv->gpll_hz) { |
| printf("%s gpll=%lu\n", __func__, priv->gpll_hz); |
| return -ENOENT; |
| } |
| |
| debug("%s %ld\n", __func__, clk->id); |
| switch (clk->id) { |
| case PLL_GPLL: |
| rate = rv1126_gpll_get_pmuclk(priv); |
| break; |
| case CLK_RTC32K: |
| rate = rv1126_rtc32k_get_pmuclk(priv); |
| break; |
| case CLK_I2C0: |
| case CLK_I2C2: |
| rate = rv1126_i2c_get_pmuclk(priv, clk->id); |
| break; |
| case CLK_PWM0: |
| case CLK_PWM1: |
| rate = rv1126_pwm_get_pmuclk(priv, clk->id); |
| break; |
| case CLK_SPI0: |
| rate = rv1126_spi_get_pmuclk(priv); |
| break; |
| case PCLK_PDPMU: |
| rate = rv1126_pdpmu_get_pmuclk(priv); |
| break; |
| default: |
| debug("%s: Unsupported CLK#%ld\n", __func__, clk->id); |
| return -ENOENT; |
| } |
| |
| return rate; |
| } |
| |
| static ulong rv1126_pmuclk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct rv1126_pmuclk_priv *priv = dev_get_priv(clk->dev); |
| ulong ret = 0; |
| |
| if (!priv->gpll_hz) { |
| printf("%s gpll=%lu\n", __func__, priv->gpll_hz); |
| return -ENOENT; |
| } |
| |
| debug("%s %ld %ld\n", __func__, clk->id, rate); |
| switch (clk->id) { |
| case PLL_GPLL: |
| ret = rv1126_gpll_set_pmuclk(priv, rate); |
| break; |
| case CLK_RTC32K: |
| ret = rv1126_rtc32k_set_pmuclk(priv, rate); |
| break; |
| case CLK_I2C0: |
| case CLK_I2C2: |
| ret = rv1126_i2c_set_pmuclk(priv, clk->id, rate); |
| break; |
| case CLK_PWM0: |
| case CLK_PWM1: |
| ret = rv1126_pwm_set_pmuclk(priv, clk->id, rate); |
| break; |
| case CLK_SPI0: |
| ret = rv1126_spi_set_pmuclk(priv, rate); |
| break; |
| case PCLK_PDPMU: |
| ret = rv1126_pdpmu_set_pmuclk(priv, rate); |
| break; |
| default: |
| debug("%s: Unsupported CLK#%ld\n", __func__, clk->id); |
| return -ENOENT; |
| } |
| |
| return ret; |
| } |
| |
| static int rv1126_rtc32k_set_parent(struct clk *clk, struct clk *parent) |
| { |
| struct rv1126_pmuclk_priv *priv = dev_get_priv(clk->dev); |
| struct rv1126_pmucru *pmucru = priv->pmucru; |
| |
| if (parent->id == CLK_OSC0_DIV32K) |
| rk_clrsetreg(&pmucru->pmu_clksel_con[0], RTC32K_SEL_MASK, |
| RTC32K_SEL_OSC0_DIV32K << RTC32K_SEL_SHIFT); |
| else |
| rk_clrsetreg(&pmucru->pmu_clksel_con[0], RTC32K_SEL_MASK, |
| RTC32K_SEL_OSC1_32K << RTC32K_SEL_SHIFT); |
| |
| return 0; |
| } |
| |
| static int rv1126_pmuclk_set_parent(struct clk *clk, struct clk *parent) |
| { |
| switch (clk->id) { |
| case CLK_RTC32K: |
| return rv1126_rtc32k_set_parent(clk, parent); |
| default: |
| debug("%s: Unsupported CLK#%ld\n", __func__, clk->id); |
| return -ENOENT; |
| } |
| } |
| |
| static struct clk_ops rv1126_pmuclk_ops = { |
| .get_rate = rv1126_pmuclk_get_rate, |
| .set_rate = rv1126_pmuclk_set_rate, |
| .set_parent = rv1126_pmuclk_set_parent, |
| }; |
| |
| static int rv1126_pmuclk_probe(struct udevice *dev) |
| { |
| struct rv1126_pmuclk_priv *priv = dev_get_priv(dev); |
| |
| priv->gpll_hz = rv1126_gpll_get_pmuclk(priv); |
| |
| return 0; |
| } |
| |
| static int rv1126_pmuclk_of_to_plat(struct udevice *dev) |
| { |
| struct rv1126_pmuclk_priv *priv = dev_get_priv(dev); |
| |
| priv->pmucru = dev_read_addr_ptr(dev); |
| |
| return 0; |
| } |
| |
| static int rv1126_pmuclk_bind(struct udevice *dev) |
| { |
| #if CONFIG_IS_ENABLED(RESET_ROCKCHIP) |
| int ret; |
| |
| ret = offsetof(struct rv1126_pmucru, pmu_softrst_con[0]); |
| ret = rockchip_reset_bind(dev, ret, 2); |
| if (ret) |
| debug("Warning: software reset driver bind failed\n"); |
| #endif |
| return 0; |
| } |
| |
| static const struct udevice_id rv1126_pmuclk_ids[] = { |
| { .compatible = "rockchip,rv1126-pmucru" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rockchip_rv1126_pmucru) = { |
| .name = "rockchip_rv1126_pmucru", |
| .id = UCLASS_CLK, |
| .of_match = rv1126_pmuclk_ids, |
| .priv_auto = sizeof(struct rv1126_pmuclk_priv), |
| .of_to_plat = rv1126_pmuclk_of_to_plat, |
| .ops = &rv1126_pmuclk_ops, |
| .bind = rv1126_pmuclk_bind, |
| .probe = rv1126_pmuclk_probe, |
| }; |
| |
| static int rv1126_armclk_set_clk(struct rv1126_clk_priv *priv, ulong hz) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| const struct rockchip_cpu_rate_table *rate; |
| ulong old_rate; |
| |
| rate = rockchip_get_cpu_settings(rv1126_cpu_rates, hz); |
| if (!rate) { |
| printf("%s unsupported rate\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* |
| * set up dependent divisors for DBG and ACLK clocks. |
| */ |
| old_rate = rockchip_pll_get_rate(&rv1126_pll_clks[APLL], |
| priv->cru, APLL); |
| if (old_rate > hz) { |
| if (rockchip_pll_set_rate(&rv1126_pll_clks[APLL], |
| priv->cru, APLL, hz)) |
| return -EINVAL; |
| rk_clrsetreg(&cru->clksel_con[1], |
| CORE_DBG_DIV_MASK | CORE_ACLK_DIV_MASK, |
| rate->pclk_div << CORE_DBG_DIV_SHIFT | |
| rate->aclk_div << CORE_ACLK_DIV_SHIFT); |
| } else if (old_rate < hz) { |
| rk_clrsetreg(&cru->clksel_con[1], |
| CORE_DBG_DIV_MASK | CORE_ACLK_DIV_MASK, |
| rate->pclk_div << CORE_DBG_DIV_SHIFT | |
| rate->aclk_div << CORE_ACLK_DIV_SHIFT); |
| if (rockchip_pll_set_rate(&rv1126_pll_clks[APLL], |
| priv->cru, APLL, hz)) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static ulong rv1126_pdcore_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 con, div; |
| |
| con = readl(&cru->clksel_con[0]); |
| div = (con & CORE_HCLK_DIV_MASK) >> CORE_HCLK_DIV_SHIFT; |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_pdcore_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| |
| rk_clrsetreg(&cru->clksel_con[0], CORE_HCLK_DIV_MASK, |
| (src_clk_div - 1) << CORE_HCLK_DIV_SHIFT); |
| |
| return rv1126_pdcore_get_clk(priv); |
| } |
| |
| static ulong rv1126_pdbus_get_clk(struct rv1126_clk_priv *priv, ulong clk_id) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 con, div, sel, parent; |
| |
| switch (clk_id) { |
| case ACLK_PDBUS: |
| con = readl(&cru->clksel_con[2]); |
| div = (con & ACLK_PDBUS_DIV_MASK) >> ACLK_PDBUS_DIV_SHIFT; |
| sel = (con & ACLK_PDBUS_SEL_MASK) >> ACLK_PDBUS_SEL_SHIFT; |
| if (sel == ACLK_PDBUS_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == ACLK_PDBUS_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| break; |
| case HCLK_PDBUS: |
| con = readl(&cru->clksel_con[2]); |
| div = (con & HCLK_PDBUS_DIV_MASK) >> HCLK_PDBUS_DIV_SHIFT; |
| sel = (con & HCLK_PDBUS_SEL_MASK) >> HCLK_PDBUS_SEL_SHIFT; |
| if (sel == HCLK_PDBUS_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == HCLK_PDBUS_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| break; |
| case PCLK_PDBUS: |
| case PCLK_WDT: |
| con = readl(&cru->clksel_con[3]); |
| div = (con & PCLK_PDBUS_DIV_MASK) >> PCLK_PDBUS_DIV_SHIFT; |
| sel = (con & PCLK_PDBUS_SEL_MASK) >> PCLK_PDBUS_SEL_SHIFT; |
| if (sel == PCLK_PDBUS_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == PCLK_PDBUS_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_pdbus_set_clk(struct rv1126_clk_priv *priv, ulong clk_id, |
| ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div, clk_sel; |
| |
| switch (clk_id) { |
| case ACLK_PDBUS: |
| if (CPLL_HZ % rate) { |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| clk_sel = ACLK_PDBUS_SEL_GPLL; |
| } else { |
| src_clk_div = DIV_ROUND_UP(priv->cpll_hz, rate); |
| clk_sel = ACLK_PDBUS_SEL_CPLL; |
| } |
| assert(src_clk_div - 1 <= 31); |
| rk_clrsetreg(&cru->clksel_con[2], |
| ACLK_PDBUS_SEL_MASK | ACLK_PDBUS_DIV_MASK, |
| clk_sel << ACLK_PDBUS_SEL_SHIFT | |
| (src_clk_div - 1) << ACLK_PDBUS_DIV_SHIFT); |
| break; |
| case HCLK_PDBUS: |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| rk_clrsetreg(&cru->clksel_con[2], |
| HCLK_PDBUS_SEL_MASK | HCLK_PDBUS_DIV_MASK, |
| HCLK_PDBUS_SEL_GPLL << HCLK_PDBUS_SEL_SHIFT | |
| (src_clk_div - 1) << HCLK_PDBUS_DIV_SHIFT); |
| break; |
| case PCLK_PDBUS: |
| case PCLK_WDT: |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| rk_clrsetreg(&cru->clksel_con[3], |
| PCLK_PDBUS_SEL_MASK | PCLK_PDBUS_DIV_MASK, |
| PCLK_PDBUS_SEL_GPLL << PCLK_PDBUS_SEL_SHIFT | |
| (src_clk_div - 1) << PCLK_PDBUS_DIV_SHIFT); |
| break; |
| |
| default: |
| printf("do not support this pdbus freq\n"); |
| return -EINVAL; |
| } |
| |
| return rv1126_pdbus_get_clk(priv, clk_id); |
| } |
| |
| static ulong rv1126_pdphp_get_clk(struct rv1126_clk_priv *priv, ulong clk_id) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 con, div, parent; |
| |
| switch (clk_id) { |
| case ACLK_PDPHP: |
| con = readl(&cru->clksel_con[53]); |
| div = (con & ACLK_PDPHP_DIV_MASK) >> ACLK_PDPHP_DIV_SHIFT; |
| parent = priv->gpll_hz; |
| break; |
| case HCLK_PDPHP: |
| con = readl(&cru->clksel_con[53]); |
| div = (con & HCLK_PDPHP_DIV_MASK) >> HCLK_PDPHP_DIV_SHIFT; |
| parent = priv->gpll_hz; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_pdphp_set_clk(struct rv1126_clk_priv *priv, ulong clk_id, |
| ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| |
| switch (clk_id) { |
| case ACLK_PDPHP: |
| rk_clrsetreg(&cru->clksel_con[53], |
| ACLK_PDPHP_SEL_MASK | ACLK_PDPHP_DIV_MASK, |
| ACLK_PDPHP_SEL_GPLL << ACLK_PDPHP_SEL_SHIFT | |
| (src_clk_div - 1) << ACLK_PDPHP_DIV_SHIFT); |
| break; |
| case HCLK_PDPHP: |
| rk_clrsetreg(&cru->clksel_con[53], |
| HCLK_PDPHP_DIV_MASK, |
| (src_clk_div - 1) << HCLK_PDPHP_DIV_SHIFT); |
| break; |
| default: |
| printf("do not support this pdphp freq\n"); |
| return -EINVAL; |
| } |
| |
| return rv1126_pdphp_get_clk(priv, clk_id); |
| } |
| |
| static ulong rv1126_pdaudio_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 con, div; |
| |
| con = readl(&cru->clksel_con[26]); |
| div = (con & HCLK_PDAUDIO_DIV_MASK) >> HCLK_PDAUDIO_DIV_SHIFT; |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_pdaudio_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| |
| rk_clrsetreg(&cru->clksel_con[26], HCLK_PDAUDIO_DIV_MASK, |
| (src_clk_div - 1) << HCLK_PDAUDIO_DIV_SHIFT); |
| |
| return rv1126_pdaudio_get_clk(priv); |
| } |
| |
| static ulong rv1126_i2c_get_clk(struct rv1126_clk_priv *priv, ulong clk_id) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, con; |
| |
| switch (clk_id) { |
| case CLK_I2C1: |
| con = readl(&cru->clksel_con[5]); |
| div = (con & CLK_I2C1_DIV_MASK) >> CLK_I2C1_DIV_SHIFT; |
| break; |
| case CLK_I2C3: |
| con = readl(&cru->clksel_con[5]); |
| div = (con & CLK_I2C3_DIV_MASK) >> CLK_I2C3_DIV_SHIFT; |
| break; |
| case CLK_I2C4: |
| con = readl(&cru->clksel_con[6]); |
| div = (con & CLK_I2C4_DIV_MASK) >> CLK_I2C4_DIV_SHIFT; |
| break; |
| case CLK_I2C5: |
| con = readl(&cru->clksel_con[6]); |
| div = (con & CLK_I2C5_DIV_MASK) >> CLK_I2C5_DIV_SHIFT; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_i2c_set_clk(struct rv1126_clk_priv *priv, ulong clk_id, |
| ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 127); |
| |
| switch (clk_id) { |
| case CLK_I2C1: |
| rk_clrsetreg(&cru->clksel_con[5], CLK_I2C1_DIV_MASK, |
| (src_clk_div - 1) << CLK_I2C1_DIV_SHIFT); |
| break; |
| case CLK_I2C3: |
| rk_clrsetreg(&cru->clksel_con[5], CLK_I2C3_DIV_MASK, |
| (src_clk_div - 1) << CLK_I2C3_DIV_SHIFT); |
| break; |
| case CLK_I2C4: |
| rk_clrsetreg(&cru->clksel_con[6], CLK_I2C4_DIV_MASK, |
| (src_clk_div - 1) << CLK_I2C4_DIV_SHIFT); |
| break; |
| case CLK_I2C5: |
| rk_clrsetreg(&cru->clksel_con[6], CLK_I2C5_DIV_MASK, |
| (src_clk_div - 1) << CLK_I2C5_DIV_SHIFT); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return rv1126_i2c_get_clk(priv, clk_id); |
| } |
| |
| static ulong rv1126_spi_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, con; |
| |
| con = readl(&cru->clksel_con[8]); |
| div = (con & CLK_SPI1_DIV_MASK) >> CLK_SPI1_DIV_SHIFT; |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_spi_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 127); |
| |
| rk_clrsetreg(&cru->clksel_con[8], |
| CLK_SPI1_SEL_MASK | CLK_SPI1_DIV_MASK, |
| CLK_SPI1_SEL_GPLL << CLK_SPI1_SEL_SHIFT | |
| (src_clk_div - 1) << CLK_SPI1_DIV_SHIFT); |
| |
| return rv1126_spi_get_clk(priv); |
| } |
| |
| static ulong rv1126_pwm_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con; |
| |
| con = readl(&cru->clksel_con[9]); |
| sel = (con & CLK_PWM2_SEL_MASK) >> CLK_PWM2_SEL_SHIFT; |
| div = (con & CLK_PWM2_DIV_MASK) >> CLK_PWM2_DIV_SHIFT; |
| if (sel == CLK_PWM2_SEL_XIN24M) |
| return OSC_HZ; |
| |
| return DIV_TO_RATE(priv->gpll_hz, div); |
| } |
| |
| static ulong rv1126_pwm_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| if (rate == OSC_HZ) { |
| rk_clrsetreg(&cru->clksel_con[9], CLK_PWM2_SEL_MASK, |
| CLK_PWM2_SEL_XIN24M << CLK_PWM2_SEL_SHIFT); |
| rk_clrsetreg(&cru->clksel_con[9], CLK_PWM2_DIV_MASK, 0); |
| } else { |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 127); |
| rk_clrsetreg(&cru->clksel_con[9], CLK_PWM2_DIV_MASK, |
| (src_clk_div - 1) << CLK_PWM2_DIV_SHIFT); |
| rk_clrsetreg(&cru->clksel_con[9], CLK_PWM2_SEL_MASK, |
| CLK_PWM2_SEL_GPLL << CLK_PWM2_SEL_SHIFT); |
| } |
| |
| return rv1126_pwm_get_clk(priv); |
| } |
| |
| static ulong rv1126_saradc_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, con; |
| |
| con = readl(&cru->clksel_con[20]); |
| div = (con & CLK_SARADC_DIV_MASK) >> CLK_SARADC_DIV_SHIFT; |
| |
| return DIV_TO_RATE(OSC_HZ, div); |
| } |
| |
| static ulong rv1126_saradc_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(OSC_HZ, rate); |
| assert(src_clk_div - 1 <= 2047); |
| rk_clrsetreg(&cru->clksel_con[20], CLK_SARADC_DIV_MASK, |
| (src_clk_div - 1) << CLK_SARADC_DIV_SHIFT); |
| |
| return rv1126_saradc_get_clk(priv); |
| } |
| |
| static ulong rv1126_crypto_get_clk(struct rv1126_clk_priv *priv, ulong clk_id) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| switch (clk_id) { |
| case CLK_CRYPTO_CORE: |
| con = readl(&cru->clksel_con[7]); |
| div = (con & CLK_CRYPTO_CORE_DIV_MASK) >> CLK_CRYPTO_CORE_DIV_SHIFT; |
| sel = (con & CLK_CRYPTO_CORE_SEL_MASK) >> CLK_CRYPTO_CORE_SEL_SHIFT; |
| if (sel == CLK_CRYPTO_CORE_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == CLK_CRYPTO_CORE_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| break; |
| case CLK_CRYPTO_PKA: |
| con = readl(&cru->clksel_con[7]); |
| div = (con & CLK_CRYPTO_PKA_DIV_MASK) >> CLK_CRYPTO_PKA_DIV_SHIFT; |
| sel = (con & CLK_CRYPTO_PKA_SEL_MASK) >> CLK_CRYPTO_PKA_SEL_SHIFT; |
| if (sel == CLK_CRYPTO_PKA_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == CLK_CRYPTO_PKA_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| break; |
| case ACLK_CRYPTO: |
| con = readl(&cru->clksel_con[4]); |
| div = (con & ACLK_CRYPTO_DIV_MASK) >> ACLK_CRYPTO_DIV_SHIFT; |
| sel = (con & ACLK_CRYPTO_SEL_MASK) >> ACLK_CRYPTO_SEL_SHIFT; |
| if (sel == ACLK_CRYPTO_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == ACLK_CRYPTO_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_crypto_set_clk(struct rv1126_clk_priv *priv, ulong clk_id, |
| ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| |
| switch (clk_id) { |
| case CLK_CRYPTO_CORE: |
| rk_clrsetreg(&cru->clksel_con[7], |
| CLK_CRYPTO_CORE_SEL_MASK | |
| CLK_CRYPTO_CORE_DIV_MASK, |
| CLK_CRYPTO_CORE_SEL_GPLL << |
| CLK_CRYPTO_CORE_SEL_SHIFT | |
| (src_clk_div - 1) << CLK_CRYPTO_CORE_DIV_SHIFT); |
| break; |
| case CLK_CRYPTO_PKA: |
| rk_clrsetreg(&cru->clksel_con[7], |
| CLK_CRYPTO_PKA_SEL_MASK | |
| CLK_CRYPTO_PKA_DIV_MASK, |
| CLK_CRYPTO_PKA_SEL_GPLL << |
| CLK_CRYPTO_PKA_SEL_SHIFT | |
| (src_clk_div - 1) << CLK_CRYPTO_PKA_DIV_SHIFT); |
| break; |
| case ACLK_CRYPTO: |
| rk_clrsetreg(&cru->clksel_con[4], |
| ACLK_CRYPTO_SEL_MASK | ACLK_CRYPTO_DIV_MASK, |
| ACLK_CRYPTO_SEL_GPLL << ACLK_CRYPTO_SEL_SHIFT | |
| (src_clk_div - 1) << ACLK_CRYPTO_DIV_SHIFT); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return rv1126_crypto_get_clk(priv, clk_id); |
| } |
| |
| static ulong rv1126_mmc_get_clk(struct rv1126_clk_priv *priv, ulong clk_id) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, con_id; |
| |
| switch (clk_id) { |
| case HCLK_SDMMC: |
| case CLK_SDMMC: |
| con_id = 55; |
| break; |
| case HCLK_SDIO: |
| case CLK_SDIO: |
| con_id = 56; |
| break; |
| case HCLK_EMMC: |
| case CLK_EMMC: |
| case SCLK_EMMC_SAMPLE: |
| con_id = 57; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| con = readl(&cru->clksel_con[con_id]); |
| div = (con & EMMC_DIV_MASK) >> EMMC_DIV_SHIFT; |
| sel = (con & EMMC_SEL_MASK) >> EMMC_SEL_SHIFT; |
| if (sel == EMMC_SEL_GPLL) |
| return DIV_TO_RATE(priv->gpll_hz, div) / 2; |
| else if (sel == EMMC_SEL_CPLL) |
| return DIV_TO_RATE(priv->cpll_hz, div) / 2; |
| else if (sel == EMMC_SEL_XIN24M) |
| return DIV_TO_RATE(OSC_HZ, div) / 2; |
| |
| return -ENOENT; |
| } |
| |
| static ulong rv1126_mmc_set_clk(struct rv1126_clk_priv *priv, ulong clk_id, |
| ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| u32 con_id; |
| |
| switch (clk_id) { |
| case HCLK_SDMMC: |
| case CLK_SDMMC: |
| con_id = 55; |
| break; |
| case HCLK_SDIO: |
| case CLK_SDIO: |
| con_id = 56; |
| break; |
| case HCLK_EMMC: |
| case CLK_EMMC: |
| con_id = 57; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| /* Select clk_sdmmc/emmc source from GPLL by default */ |
| /* mmc clock defaulg div 2 internal, need provide double in cru */ |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz / 2, rate); |
| |
| if (src_clk_div > 127) { |
| /* use 24MHz source for 400KHz clock */ |
| src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, rate); |
| rk_clrsetreg(&cru->clksel_con[con_id], |
| EMMC_SEL_MASK | EMMC_DIV_MASK, |
| EMMC_SEL_XIN24M << EMMC_SEL_SHIFT | |
| (src_clk_div - 1) << EMMC_DIV_SHIFT); |
| } else { |
| rk_clrsetreg(&cru->clksel_con[con_id], |
| EMMC_SEL_MASK | EMMC_DIV_MASK, |
| EMMC_SEL_GPLL << EMMC_SEL_SHIFT | |
| (src_clk_div - 1) << EMMC_DIV_SHIFT); |
| } |
| |
| return rv1126_mmc_get_clk(priv, clk_id); |
| } |
| |
| static ulong rv1126_sfc_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| con = readl(&cru->clksel_con[58]); |
| div = (con & SCLK_SFC_DIV_MASK) >> SCLK_SFC_DIV_SHIFT; |
| sel = (con & SCLK_SFC_SEL_MASK) >> SCLK_SFC_SEL_SHIFT; |
| if (sel == SCLK_SFC_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == SCLK_SFC_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_sfc_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| rk_clrsetreg(&cru->clksel_con[58], |
| SCLK_SFC_SEL_MASK | SCLK_SFC_DIV_MASK, |
| SCLK_SFC_SEL_GPLL << SCLK_SFC_SEL_SHIFT | |
| (src_clk_div - 1) << SCLK_SFC_DIV_SHIFT); |
| |
| return rv1126_sfc_get_clk(priv); |
| } |
| |
| static ulong rv1126_nand_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| con = readl(&cru->clksel_con[59]); |
| div = (con & CLK_NANDC_DIV_MASK) >> CLK_NANDC_DIV_SHIFT; |
| sel = (con & CLK_NANDC_SEL_MASK) >> CLK_NANDC_SEL_SHIFT; |
| if (sel == CLK_NANDC_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == CLK_NANDC_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_nand_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| rk_clrsetreg(&cru->clksel_con[59], |
| CLK_NANDC_SEL_MASK | CLK_NANDC_DIV_MASK, |
| CLK_NANDC_SEL_GPLL << CLK_NANDC_SEL_SHIFT | |
| (src_clk_div - 1) << CLK_NANDC_DIV_SHIFT); |
| |
| return rv1126_nand_get_clk(priv); |
| } |
| |
| static ulong rv1126_aclk_vop_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| con = readl(&cru->clksel_con[45]); |
| div = (con & ACLK_PDVO_DIV_MASK) >> ACLK_PDVO_DIV_SHIFT; |
| sel = (con & ACLK_PDVO_SEL_MASK) >> ACLK_PDVO_SEL_SHIFT; |
| if (sel == ACLK_PDVO_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == ACLK_PDVO_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_aclk_vop_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| rk_clrsetreg(&cru->clksel_con[45], |
| ACLK_PDVO_SEL_MASK | ACLK_PDVO_DIV_MASK, |
| ACLK_PDVO_SEL_GPLL << ACLK_PDVO_SEL_SHIFT | |
| (src_clk_div - 1) << ACLK_PDVO_DIV_SHIFT); |
| |
| return rv1126_aclk_vop_get_clk(priv); |
| } |
| |
| static ulong rv1126_dclk_vop_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| con = readl(&cru->clksel_con[47]); |
| div = (con & DCLK_VOP_DIV_MASK) >> DCLK_VOP_DIV_SHIFT; |
| sel = (con & DCLK_VOP_SEL_MASK) >> DCLK_VOP_SEL_SHIFT; |
| if (sel == DCLK_VOP_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == DCLK_VOP_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_dclk_vop_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| ulong pll_rate, now, best_rate = 0; |
| u32 i, div, best_div = 0, best_sel = 0; |
| |
| for (i = 0; i <= DCLK_VOP_SEL_CPLL; i++) { |
| switch (i) { |
| case DCLK_VOP_SEL_GPLL: |
| pll_rate = priv->gpll_hz; |
| break; |
| case DCLK_VOP_SEL_CPLL: |
| pll_rate = priv->cpll_hz; |
| break; |
| default: |
| printf("do not support this vop pll sel\n"); |
| return -EINVAL; |
| } |
| |
| div = DIV_ROUND_UP(pll_rate, rate); |
| if (div > 255) |
| continue; |
| now = pll_rate / div; |
| if (abs(rate - now) < abs(rate - best_rate)) { |
| best_rate = now; |
| best_div = div; |
| best_sel = i; |
| } |
| debug("pll_rate=%lu, best_rate=%lu, best_div=%u, best_sel=%u\n", |
| pll_rate, best_rate, best_div, best_sel); |
| } |
| |
| if (best_rate) { |
| rk_clrsetreg(&cru->clksel_con[47], |
| DCLK_VOP_SEL_MASK | DCLK_VOP_DIV_MASK, |
| best_sel << DCLK_VOP_SEL_SHIFT | |
| (best_div - 1) << DCLK_VOP_DIV_SHIFT); |
| } else { |
| printf("do not support this vop freq %lu\n", rate); |
| return -EINVAL; |
| } |
| |
| return rv1126_dclk_vop_get_clk(priv); |
| } |
| |
| static ulong rv1126_scr1_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| con = readl(&cru->clksel_con[3]); |
| div = (con & CLK_SCR1_DIV_MASK) >> CLK_SCR1_DIV_SHIFT; |
| sel = (con & CLK_SCR1_SEL_MASK) >> CLK_SCR1_SEL_SHIFT; |
| if (sel == CLK_SCR1_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == CLK_SCR1_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_scr1_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| rk_clrsetreg(&cru->clksel_con[3], |
| CLK_SCR1_SEL_MASK | CLK_SCR1_DIV_MASK, |
| CLK_SCR1_SEL_GPLL << CLK_SCR1_SEL_SHIFT | |
| (src_clk_div - 1) << CLK_SCR1_DIV_SHIFT); |
| |
| return rv1126_scr1_get_clk(priv); |
| } |
| |
| static ulong rv1126_gmac_src_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| con = readl(&cru->clksel_con[63]); |
| div = (con & CLK_GMAC_SRC_DIV_MASK) >> CLK_GMAC_SRC_DIV_SHIFT; |
| sel = (con & CLK_GMAC_SRC_SEL_MASK) >> CLK_GMAC_SRC_SEL_SHIFT; |
| if (sel == CLK_GMAC_SRC_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else if (sel == CLK_GMAC_SRC_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else |
| return -ENOENT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_gmac_src_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->cpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| rk_clrsetreg(&cru->clksel_con[63], |
| CLK_GMAC_SRC_SEL_MASK | CLK_GMAC_SRC_DIV_MASK, |
| CLK_GMAC_SRC_SEL_CPLL << CLK_GMAC_SRC_SEL_SHIFT | |
| (src_clk_div - 1) << CLK_GMAC_SRC_DIV_SHIFT); |
| |
| return rv1126_gmac_src_get_clk(priv); |
| } |
| |
| static ulong rv1126_gmac_out_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| con = readl(&cru->clksel_con[61]); |
| div = (con & CLK_GMAC_OUT_DIV_MASK) >> CLK_GMAC_OUT_DIV_SHIFT; |
| sel = (con & CLK_GMAC_OUT_SEL_MASK) >> CLK_GMAC_OUT_SEL_SHIFT; |
| if (sel == CLK_GMAC_OUT_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else if (sel == CLK_GMAC_OUT_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else |
| return -ENOENT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_gmac_out_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->cpll_hz, rate); |
| assert(src_clk_div - 1 <= 31); |
| rk_clrsetreg(&cru->clksel_con[61], |
| CLK_GMAC_OUT_SEL_MASK | CLK_GMAC_OUT_DIV_MASK, |
| CLK_GMAC_OUT_SEL_CPLL << CLK_GMAC_OUT_SEL_SHIFT | |
| (src_clk_div - 1) << CLK_GMAC_OUT_DIV_SHIFT); |
| |
| return rv1126_gmac_out_get_clk(priv); |
| } |
| |
| static ulong rv1126_gmac_tx_rx_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 con, sel, div_sel; |
| |
| con = readl(&cru->gmac_con); |
| sel = (con & GMAC_MODE_SEL_MASK) >> GMAC_MODE_SEL_SHIFT; |
| |
| if (sel == GMAC_RGMII_MODE) { |
| if (rate == 2500000) |
| div_sel = RGMII_CLK_DIV50; |
| else if (rate == 25000000) |
| div_sel = RGMII_CLK_DIV5; |
| else |
| div_sel = RGMII_CLK_DIV0; |
| rk_clrsetreg(&cru->gmac_con, RGMII_CLK_SEL_MASK, |
| div_sel << RGMII_CLK_SEL_SHIFT); |
| } else if (sel == GMAC_RMII_MODE) { |
| if (rate == 2500000) |
| div_sel = RMII_CLK_DIV20; |
| else |
| div_sel = RMII_CLK_DIV2; |
| rk_clrsetreg(&cru->gmac_con, RMII_CLK_SEL_MASK, |
| div_sel << RMII_CLK_SEL_SHIFT); |
| } |
| |
| return 0; |
| } |
| |
| static ulong rv1126_pclk_gmac_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, con, parent; |
| |
| parent = rv1126_pdphp_get_clk(priv, ACLK_PDPHP); |
| |
| con = readl(&cru->clksel_con[63]); |
| div = (con & PCLK_GMAC_DIV_MASK) >> PCLK_GMAC_DIV_SHIFT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_dclk_decom_get_clk(struct rv1126_clk_priv *priv) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 div, sel, con, parent; |
| |
| con = readl(&cru->clksel_con[25]); |
| div = (con & DCLK_DECOM_DIV_MASK) >> DCLK_DECOM_DIV_SHIFT; |
| sel = (con & DCLK_DECOM_SEL_MASK) >> DCLK_DECOM_SEL_SHIFT; |
| if (sel == DCLK_DECOM_SEL_GPLL) |
| parent = priv->gpll_hz; |
| else if (sel == DCLK_DECOM_SEL_CPLL) |
| parent = priv->cpll_hz; |
| else |
| return -ENOENT; |
| |
| return DIV_TO_RATE(parent, div); |
| } |
| |
| static ulong rv1126_dclk_decom_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct rv1126_cru *cru = priv->cru; |
| u32 src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate); |
| assert(src_clk_div - 1 <= 127); |
| rk_clrsetreg(&cru->clksel_con[25], |
| DCLK_DECOM_SEL_MASK | DCLK_DECOM_DIV_MASK, |
| DCLK_DECOM_SEL_GPLL << DCLK_DECOM_SEL_SHIFT | |
| (src_clk_div - 1) << DCLK_DECOM_DIV_SHIFT); |
| |
| return rv1126_dclk_decom_get_clk(priv); |
| } |
| |
| static ulong rv1126_clk_get_rate(struct clk *clk) |
| { |
| struct rv1126_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong rate = 0; |
| |
| if (!priv->gpll_hz) { |
| printf("%s gpll=%lu\n", __func__, priv->gpll_hz); |
| return -ENOENT; |
| } |
| |
| switch (clk->id) { |
| case PLL_APLL: |
| case ARMCLK: |
| rate = rockchip_pll_get_rate(&rv1126_pll_clks[APLL], priv->cru, |
| APLL); |
| break; |
| case PLL_CPLL: |
| rate = rockchip_pll_get_rate(&rv1126_pll_clks[CPLL], priv->cru, |
| CPLL); |
| break; |
| case PLL_HPLL: |
| rate = rockchip_pll_get_rate(&rv1126_pll_clks[HPLL], priv->cru, |
| HPLL); |
| break; |
| case PLL_DPLL: |
| rate = rockchip_pll_get_rate(&rv1126_pll_clks[DPLL], priv->cru, |
| DPLL); |
| break; |
| case HCLK_PDCORE_NIU: |
| rate = rv1126_pdcore_get_clk(priv); |
| break; |
| case ACLK_PDBUS: |
| case HCLK_PDBUS: |
| case PCLK_PDBUS: |
| case PCLK_WDT: |
| rate = rv1126_pdbus_get_clk(priv, clk->id); |
| break; |
| case ACLK_PDPHP: |
| case HCLK_PDPHP: |
| rate = rv1126_pdphp_get_clk(priv, clk->id); |
| break; |
| case HCLK_PDAUDIO: |
| rate = rv1126_pdaudio_get_clk(priv); |
| break; |
| case CLK_I2C1: |
| case CLK_I2C3: |
| case CLK_I2C4: |
| case CLK_I2C5: |
| rate = rv1126_i2c_get_clk(priv, clk->id); |
| break; |
| case CLK_SPI1: |
| rate = rv1126_spi_get_clk(priv); |
| break; |
| case CLK_PWM2: |
| rate = rv1126_pwm_get_clk(priv); |
| break; |
| case CLK_SARADC: |
| rate = rv1126_saradc_get_clk(priv); |
| break; |
| case CLK_CRYPTO_CORE: |
| case CLK_CRYPTO_PKA: |
| case ACLK_CRYPTO: |
| rate = rv1126_crypto_get_clk(priv, clk->id); |
| break; |
| case CLK_SDMMC: |
| case HCLK_SDMMC: |
| case CLK_SDIO: |
| case HCLK_SDIO: |
| case CLK_EMMC: |
| case HCLK_EMMC: |
| case SCLK_EMMC_SAMPLE: |
| rate = rv1126_mmc_get_clk(priv, clk->id); |
| break; |
| case SCLK_SFC: |
| rate = rv1126_sfc_get_clk(priv); |
| break; |
| case CLK_NANDC: |
| rate = rv1126_nand_get_clk(priv); |
| break; |
| case ACLK_PDVO: |
| case ACLK_VOP: |
| rate = rv1126_aclk_vop_get_clk(priv); |
| break; |
| case DCLK_VOP: |
| rate = rv1126_dclk_vop_get_clk(priv); |
| break; |
| case CLK_SCR1_CORE: |
| rate = rv1126_scr1_get_clk(priv); |
| break; |
| case CLK_GMAC_SRC: |
| rate = rv1126_gmac_src_get_clk(priv); |
| break; |
| case CLK_GMAC_ETHERNET_OUT: |
| rate = rv1126_gmac_out_get_clk(priv); |
| break; |
| case PCLK_GMAC: |
| rate = rv1126_pclk_gmac_get_clk(priv); |
| break; |
| case DCLK_DECOM: |
| rate = rv1126_dclk_decom_get_clk(priv); |
| break; |
| default: |
| debug("%s: Unsupported CLK#%ld\n", __func__, clk->id); |
| return -ENOENT; |
| } |
| |
| return rate; |
| }; |
| |
| static ulong rv1126_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct rv1126_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong ret = 0; |
| |
| if (!priv->gpll_hz) { |
| printf("%s gpll=%lu\n", __func__, priv->gpll_hz); |
| return -ENOENT; |
| } |
| |
| switch (clk->id) { |
| case PLL_APLL: |
| case ARMCLK: |
| if (priv->armclk_hz) |
| rv1126_armclk_set_clk(priv, rate); |
| priv->armclk_hz = rate; |
| break; |
| case PLL_CPLL: |
| ret = rockchip_pll_set_rate(&rv1126_pll_clks[CPLL], priv->cru, |
| CPLL, rate); |
| break; |
| case PLL_HPLL: |
| ret = rockchip_pll_set_rate(&rv1126_pll_clks[HPLL], priv->cru, |
| HPLL, rate); |
| break; |
| case ACLK_PDBUS: |
| case HCLK_PDBUS: |
| case PCLK_PDBUS: |
| case PCLK_WDT: |
| ret = rv1126_pdbus_set_clk(priv, clk->id, rate); |
| break; |
| case ACLK_PDPHP: |
| case HCLK_PDPHP: |
| ret = rv1126_pdphp_set_clk(priv, clk->id, rate); |
| break; |
| case HCLK_PDCORE_NIU: |
| ret = rv1126_pdcore_set_clk(priv, rate); |
| break; |
| case HCLK_PDAUDIO: |
| ret = rv1126_pdaudio_set_clk(priv, rate); |
| break; |
| case CLK_I2C1: |
| case CLK_I2C3: |
| case CLK_I2C4: |
| case CLK_I2C5: |
| ret = rv1126_i2c_set_clk(priv, clk->id, rate); |
| break; |
| case CLK_SPI1: |
| ret = rv1126_spi_set_clk(priv, rate); |
| break; |
| case CLK_PWM2: |
| ret = rv1126_pwm_set_clk(priv, rate); |
| break; |
| case CLK_SARADC: |
| ret = rv1126_saradc_set_clk(priv, rate); |
| break; |
| case CLK_CRYPTO_CORE: |
| case CLK_CRYPTO_PKA: |
| case ACLK_CRYPTO: |
| ret = rv1126_crypto_set_clk(priv, clk->id, rate); |
| break; |
| case CLK_SDMMC: |
| case HCLK_SDMMC: |
| case CLK_SDIO: |
| case HCLK_SDIO: |
| case CLK_EMMC: |
| case HCLK_EMMC: |
| ret = rv1126_mmc_set_clk(priv, clk->id, rate); |
| break; |
| case SCLK_SFC: |
| ret = rv1126_sfc_set_clk(priv, rate); |
| break; |
| case CLK_NANDC: |
| ret = rv1126_nand_set_clk(priv, rate); |
| break; |
| case ACLK_PDVO: |
| case ACLK_VOP: |
| ret = rv1126_aclk_vop_set_clk(priv, rate); |
| break; |
| case DCLK_VOP: |
| ret = rv1126_dclk_vop_set_clk(priv, rate); |
| break; |
| case CLK_SCR1_CORE: |
| ret = rv1126_scr1_set_clk(priv, rate); |
| break; |
| case CLK_GMAC_SRC: |
| ret = rv1126_gmac_src_set_clk(priv, rate); |
| break; |
| case CLK_GMAC_ETHERNET_OUT: |
| ret = rv1126_gmac_out_set_clk(priv, rate); |
| break; |
| case CLK_GMAC_TX_RX: |
| ret = rv1126_gmac_tx_rx_set_clk(priv, rate); |
| break; |
| case DCLK_DECOM: |
| ret = rv1126_dclk_decom_set_clk(priv, rate); |
| break; |
| default: |
| debug("%s: Unsupported CLK#%ld\n", __func__, clk->id); |
| return -ENOENT; |
| } |
| |
| return ret; |
| }; |
| |
| #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) |
| static int rv1126_gmac_src_set_parent(struct clk *clk, struct clk *parent) |
| { |
| struct rv1126_clk_priv *priv = dev_get_priv(clk->dev); |
| struct rv1126_grf *grf = priv->grf; |
| |
| if (parent->id == CLK_GMAC_SRC_M0) |
| rk_clrsetreg(&grf->iofunc_con1, GMAC_SRC_SEL_MASK, |
| GMAC_SRC_SEL_M0 << GMAC_SRC_SEL_SHIFT); |
| else if (parent->id == CLK_GMAC_SRC_M1) |
| rk_clrsetreg(&grf->iofunc_con1, GMAC_SRC_SEL_MASK, |
| GMAC_SRC_SEL_M1 << GMAC_SRC_SEL_SHIFT); |
| |
| return 0; |
| } |
| |
| static int rv1126_gmac_src_m0_set_parent(struct clk *clk, struct clk *parent) |
| { |
| struct rv1126_clk_priv *priv = dev_get_priv(clk->dev); |
| struct rv1126_cru *cru = priv->cru; |
| |
| if (parent->id == CLK_GMAC_DIV) |
| rk_clrsetreg(&cru->gmac_con, GMAC_SRC_M0_SEL_MASK, |
| GMAC_SRC_M0_SEL_INT << GMAC_SRC_M0_SEL_SHIFT); |
| else |
| rk_clrsetreg(&cru->gmac_con, GMAC_SRC_M0_SEL_MASK, |
| GMAC_SRC_M0_SEL_EXT << GMAC_SRC_M0_SEL_SHIFT); |
| |
| return 0; |
| } |
| |
| static int rv1126_gmac_src_m1_set_parent(struct clk *clk, struct clk *parent) |
| { |
| struct rv1126_clk_priv *priv = dev_get_priv(clk->dev); |
| struct rv1126_cru *cru = priv->cru; |
| |
| if (parent->id == CLK_GMAC_DIV) |
| rk_clrsetreg(&cru->gmac_con, GMAC_SRC_M1_SEL_MASK, |
| GMAC_SRC_M1_SEL_INT << GMAC_SRC_M1_SEL_SHIFT); |
| else |
| rk_clrsetreg(&cru->gmac_con, GMAC_SRC_M1_SEL_MASK, |
| GMAC_SRC_M1_SEL_EXT << GMAC_SRC_M1_SEL_SHIFT); |
| |
| return 0; |
| } |
| |
| static int rv1126_gmac_tx_rx_set_parent(struct clk *clk, struct clk *parent) |
| { |
| struct rv1126_clk_priv *priv = dev_get_priv(clk->dev); |
| struct rv1126_cru *cru = priv->cru; |
| |
| if (parent->id == RGMII_MODE_CLK) |
| rk_clrsetreg(&cru->gmac_con, GMAC_MODE_SEL_MASK, |
| GMAC_RGMII_MODE << GMAC_MODE_SEL_SHIFT); |
| else |
| rk_clrsetreg(&cru->gmac_con, GMAC_MODE_SEL_MASK, |
| GMAC_RMII_MODE << GMAC_MODE_SEL_SHIFT); |
| |
| return 0; |
| } |
| |
| static int rv1126_clk_set_parent(struct clk *clk, struct clk *parent) |
| { |
| switch (clk->id) { |
| case CLK_GMAC_SRC: |
| return rv1126_gmac_src_set_parent(clk, parent); |
| case CLK_GMAC_SRC_M0: |
| return rv1126_gmac_src_m0_set_parent(clk, parent); |
| case CLK_GMAC_SRC_M1: |
| return rv1126_gmac_src_m1_set_parent(clk, parent); |
| case CLK_GMAC_TX_RX: |
| return rv1126_gmac_tx_rx_set_parent(clk, parent); |
| default: |
| return -ENOENT; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static struct clk_ops rv1126_clk_ops = { |
| .get_rate = rv1126_clk_get_rate, |
| .set_rate = rv1126_clk_set_rate, |
| #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) |
| .set_parent = rv1126_clk_set_parent, |
| #endif |
| }; |
| |
| static ulong rv1126_gpll_set_rate(struct rv1126_clk_priv *priv, |
| struct rv1126_pmuclk_priv *pmu_priv, |
| ulong rate) |
| { |
| ulong emmc_rate, sfc_rate, nandc_rate; |
| bool restore = false; |
| |
| if (priv->gpll_hz != OSC_HZ) { |
| emmc_rate = rv1126_mmc_get_clk(priv, CLK_EMMC); |
| sfc_rate = rv1126_sfc_get_clk(priv); |
| nandc_rate = rv1126_nand_get_clk(priv); |
| debug("%s emmc=%lu, sfc=%lu, nandc=%lu\n", __func__, |
| emmc_rate, sfc_rate, nandc_rate); |
| restore = true; |
| } |
| |
| /* |
| * the child div is big enough for gpll 1188MHz, |
| * even maskrom has change some clocks. |
| */ |
| if (rockchip_pll_set_rate(&rv1126_pll_clks[GPLL], |
| pmu_priv->pmucru, GPLL, rate)) |
| return -EINVAL; |
| pmu_priv->gpll_hz = rate; |
| priv->gpll_hz = rate; |
| |
| if (restore) { |
| rv1126_mmc_set_clk(priv, CLK_EMMC, emmc_rate); |
| rv1126_sfc_set_clk(priv, sfc_rate); |
| rv1126_nand_set_clk(priv, nandc_rate); |
| } |
| |
| return 0; |
| } |
| |
| static int rv1126_gpll_set_clk(struct rv1126_clk_priv *priv, ulong rate) |
| { |
| struct udevice *pmucru_dev; |
| struct rv1126_pmuclk_priv *pmu_priv; |
| int ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_CLK, |
| DM_DRIVER_GET(rockchip_rv1126_pmucru), |
| &pmucru_dev); |
| if (ret) { |
| printf("%s: could not find pmucru device\n", __func__); |
| return ret; |
| } |
| pmu_priv = dev_get_priv(pmucru_dev); |
| priv->gpll_hz = pmu_priv->gpll_hz; |
| |
| if (rv1126_gpll_set_rate(priv, pmu_priv, rate)) { |
| printf("%s: failed to set gpll rate %lu\n", __func__, rate); |
| return -EINVAL; |
| } |
| |
| rv1126_pdpmu_set_pmuclk(pmu_priv, PCLK_PDPMU_HZ); |
| rv1126_rtc32k_set_pmuclk(pmu_priv, CLK_OSC0_DIV_HZ); |
| |
| return 0; |
| } |
| |
| static void rv1126_clk_init(struct rv1126_clk_priv *priv) |
| { |
| int ret; |
| |
| priv->sync_kernel = false; |
| if (!priv->armclk_enter_hz) { |
| priv->armclk_enter_hz = |
| rockchip_pll_get_rate(&rv1126_pll_clks[APLL], |
| priv->cru, APLL); |
| priv->armclk_init_hz = priv->armclk_enter_hz; |
| } |
| |
| if (priv->armclk_init_hz != APLL_HZ) { |
| ret = rv1126_armclk_set_clk(priv, APLL_HZ); |
| if (!ret) |
| priv->armclk_init_hz = APLL_HZ; |
| } |
| if (priv->cpll_hz != CPLL_HZ) { |
| ret = rockchip_pll_set_rate(&rv1126_pll_clks[CPLL], priv->cru, |
| CPLL, CPLL_HZ); |
| if (!ret) |
| priv->cpll_hz = CPLL_HZ; |
| } |
| if (priv->hpll_hz != HPLL_HZ) { |
| ret = rockchip_pll_set_rate(&rv1126_pll_clks[HPLL], priv->cru, |
| HPLL, HPLL_HZ); |
| if (!ret) |
| priv->hpll_hz = HPLL_HZ; |
| } |
| if (priv->gpll_hz != GPLL_HZ) |
| rv1126_gpll_set_clk(priv, GPLL_HZ); |
| |
| rv1126_pdbus_set_clk(priv, ACLK_PDBUS, ACLK_PDBUS_HZ); |
| rv1126_pdbus_set_clk(priv, HCLK_PDBUS, HCLK_PDBUS_HZ); |
| rv1126_pdbus_set_clk(priv, PCLK_PDBUS, PCLK_PDBUS_HZ); |
| rv1126_pdphp_set_clk(priv, ACLK_PDPHP, ACLK_PDPHP_HZ); |
| rv1126_pdphp_set_clk(priv, HCLK_PDPHP, HCLK_PDPHP_HZ); |
| rv1126_pdcore_set_clk(priv, HCLK_PDCORE_HZ); |
| rv1126_pdaudio_set_clk(priv, HCLK_PDAUDIO_HZ); |
| } |
| |
| static int rv1126_clk_probe(struct udevice *dev) |
| { |
| struct rv1126_clk_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| if (IS_ERR(priv->grf)) |
| return PTR_ERR(priv->grf); |
| |
| rv1126_clk_init(priv); |
| |
| /* Process 'assigned-{clocks/clock-parents/clock-rates}' properties */ |
| ret = clk_set_defaults(dev, 1); |
| if (ret) |
| debug("%s clk_set_defaults failed %d\n", __func__, ret); |
| else |
| priv->sync_kernel = true; |
| |
| return 0; |
| } |
| |
| static int rv1126_clk_of_to_plat(struct udevice *dev) |
| { |
| struct rv1126_clk_priv *priv = dev_get_priv(dev); |
| |
| priv->cru = dev_read_addr_ptr(dev); |
| |
| return 0; |
| } |
| |
| static int rv1126_clk_bind(struct udevice *dev) |
| { |
| int ret; |
| struct udevice *sys_child; |
| struct sysreset_reg *priv; |
| |
| /* The reset driver does not have a device node, so bind it here */ |
| ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset", |
| &sys_child); |
| if (ret) { |
| debug("Warning: No sysreset driver: ret=%d\n", ret); |
| } else { |
| priv = malloc(sizeof(struct sysreset_reg)); |
| priv->glb_srst_fst_value = offsetof(struct rv1126_cru, |
| glb_srst_fst); |
| priv->glb_srst_snd_value = offsetof(struct rv1126_cru, |
| glb_srst_snd); |
| dev_set_priv(sys_child, priv); |
| } |
| |
| #if CONFIG_IS_ENABLED(RESET_ROCKCHIP) |
| ret = offsetof(struct rv1126_cru, softrst_con[0]); |
| ret = rockchip_reset_bind(dev, ret, 15); |
| if (ret) |
| debug("Warning: software reset driver bind failed\n"); |
| #endif |
| return 0; |
| } |
| |
| static const struct udevice_id rv1126_clk_ids[] = { |
| { .compatible = "rockchip,rv1126-cru" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rockchip_rv1126_cru) = { |
| .name = "rockchip_rv1126_cru", |
| .id = UCLASS_CLK, |
| .of_match = rv1126_clk_ids, |
| .priv_auto = sizeof(struct rv1126_clk_priv), |
| .of_to_plat = rv1126_clk_of_to_plat, |
| .ops = &rv1126_clk_ops, |
| .bind = rv1126_clk_bind, |
| .probe = rv1126_clk_probe, |
| }; |