arch/arm/dts/stm32f746-disco.dts - platform/external/u-boot - Gitiles

 /*
  * Copyright 2016 - Michael Kurz <michi.kurz@gmail.com>
  * Copyright 2016 - Vikas MANOCHA <vikas.manocha@st.com>
  *
  * Based on:
  * stm32f469-disco.dts from Linux
  * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 /dts-v1/;
 #include "stm32f746.dtsi"
 #include <dt-bindings/memory/stm32-sdram.h>
 #include <dt-bindings/gpio/gpio.h>

 / {
 	model = "STMicroelectronics STM32F746-DISCO board";
 	compatible = "st,stm32f746-disco", "st,stm32f746";

 	chosen {
 		bootargs = "root=/dev/ram rdinit=/linuxrc";
 		stdout-path = "serial0:115200n8";
 	};

 	memory {
 		reg = <0xC0000000 0x800000>;
 	};

 	aliases {
 		serial0 = &usart1;
 		spi0 = &qspi;
 		mmc0 = &sdio;
 		/* Aliases for gpios so as to use sequence */
 		gpio0 = &gpioa;
 		gpio1 = &gpiob;
 		gpio2 = &gpioc;
 		gpio3 = &gpiod;
 		gpio4 = &gpioe;
 		gpio5 = &gpiof;
 		gpio6 = &gpiog;
 		gpio7 = &gpioh;
 		gpio8 = &gpioi;
 		gpio9 = &gpioj;
 		gpio10 = &gpiok;
 	};

 	led1 {
 		compatible = "st,led1";
 		led-gpio = <&gpioi 1 0>;
 	};

 	button1 {
 		compatible = "st,button1";
 		button-gpio = <&gpioi 11 0>;
 	};

 	backlight: backlight {
 		compatible = "gpio-backlight";
 		gpios = <&gpiok 3 0>;
 		status = "okay";
 	};

 	panel-rgb@0 {
 		compatible = "simple-panel";
 		backlight = <&backlight>;
 		enable-gpios = <&gpioi 12 0>;
 		status = "okay";

 		display-timings {
 			timing@0 {
 				clock-frequency = <9000000>;
 				hactive = <480>;
 				vactive = <272>;
 				hfront-porch = <2>;
 				hback-porch = <2>;
 				hsync-len = <41>;
 				vfront-porch = <2>;
 				vback-porch = <2>;
 				vsync-len = <10>;
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <0>;
 				pixelclk-active = <1>;
 			};
 		};
 	};
 };

 &clk_hse {
 	clock-frequency = <25000000>;
 };

 &pinctrl {
 	usart1_pins_a: usart1@0	{
 		pins1 {
 		       pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
 				bias-disable;
 				drive-push-pull;
 				slew-rate = <2>;
 		};
 		pins2 {
 			pinmux = <STM32F746_PB7_FUNC_USART1_RX>;
 			bias-disable;
 		};
 	};

 	ethernet_mii: mii@0 {
 	      pins {
 		      pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
 			     <STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
 			     <STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
 			     <STM32F746_PA2_FUNC_ETH_MDIO>,
 			     <STM32F746_PC1_FUNC_ETH_MDC>,
 			     <STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
 			     <STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
 			     <STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
 			     <STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
 		      slew-rate = <2>;
 	      };
 	};

 	qspi_pins: qspi@0 {
 		pins {
 			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
 			       <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
 			       <STM32F746_PD11_FUNC_QUADSPI_BK1_IO0>,
 			       <STM32F746_PD12_FUNC_QUADSPI_BK1_IO1>,
 			       <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
 			       <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
 			slew-rate = <2>;
 		};
 	};

 	fmc_pins: fmc@0 {
 		pins {
 			pinmux = <STM32F746_PD10_FUNC_FMC_D15>,
 				 <STM32F746_PD9_FUNC_FMC_D14>,
 				 <STM32F746_PD8_FUNC_FMC_D13>,
 				 <STM32F746_PE15_FUNC_FMC_D12>,
 				 <STM32F746_PE14_FUNC_FMC_D11>,
 				 <STM32F746_PE13_FUNC_FMC_D10>,
 				 <STM32F746_PE12_FUNC_FMC_D9>,
 				 <STM32F746_PE11_FUNC_FMC_D8>,
 				 <STM32F746_PE10_FUNC_FMC_D7>,
 				 <STM32F746_PE9_FUNC_FMC_D6>,
 				 <STM32F746_PE8_FUNC_FMC_D5>,
 				 <STM32F746_PE7_FUNC_FMC_D4>,
 				 <STM32F746_PD1_FUNC_FMC_D3>,
 				 <STM32F746_PD0_FUNC_FMC_D2>,
 				 <STM32F746_PD15_FUNC_FMC_D1>,
 				 <STM32F746_PD14_FUNC_FMC_D0>,

 				 <STM32F746_PE1_FUNC_FMC_NBL1>,
 				 <STM32F746_PE0_FUNC_FMC_NBL0>,

 				 <STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
 				 <STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,

 				 <STM32F746_PG1_FUNC_FMC_A11>,
 				 <STM32F746_PG0_FUNC_FMC_A10>,
 				 <STM32F746_PF15_FUNC_FMC_A9>,
 				 <STM32F746_PF14_FUNC_FMC_A8>,
 				 <STM32F746_PF13_FUNC_FMC_A7>,
 				 <STM32F746_PF12_FUNC_FMC_A6>,
 				 <STM32F746_PF5_FUNC_FMC_A5>,
 				 <STM32F746_PF4_FUNC_FMC_A4>,
 				 <STM32F746_PF3_FUNC_FMC_A3>,
 				 <STM32F746_PF2_FUNC_FMC_A2>,
 				 <STM32F746_PF1_FUNC_FMC_A1>,
 				 <STM32F746_PF0_FUNC_FMC_A0>,

 				 <STM32F746_PH3_FUNC_FMC_SDNE0>,
 				 <STM32F746_PH5_FUNC_FMC_SDNWE>,
 				 <STM32F746_PF11_FUNC_FMC_SDNRAS>,
 				 <STM32F746_PG15_FUNC_FMC_SDNCAS>,
 				 <STM32F746_PC3_FUNC_FMC_SDCKE0>,
 				 <STM32F746_PG8_FUNC_FMC_SDCLK>;
 			  slew-rate = <2>;
 		};
 	};

 	ltdc_pins: ltdc@0 {
 		pins {
 			pinmux = <STM32F746_PE4_FUNC_LCD_B0>,
 			       <STM32F746_PG12_FUNC_LCD_B4>,
 			       <STM32F746_PI9_FUNC_LCD_VSYNC>,
 			       <STM32F746_PI10_FUNC_LCD_HSYNC>,
 			       <STM32F746_PI14_FUNC_LCD_CLK>,
 			       <STM32F746_PI15_FUNC_LCD_R0>,
 			       <STM32F746_PJ0_FUNC_LCD_R1>,
 			       <STM32F746_PJ1_FUNC_LCD_R2>,
 			       <STM32F746_PJ2_FUNC_LCD_R3>,
 			       <STM32F746_PJ3_FUNC_LCD_R4>,
 			       <STM32F746_PJ4_FUNC_LCD_R5>,
 			       <STM32F746_PJ5_FUNC_LCD_R6>,
 			       <STM32F746_PJ6_FUNC_LCD_R7>,
 			       <STM32F746_PJ7_FUNC_LCD_G0>,
 			       <STM32F746_PJ8_FUNC_LCD_G1>,
 			       <STM32F746_PJ9_FUNC_LCD_G2>,
 			       <STM32F746_PJ10_FUNC_LCD_G3>,
 			       <STM32F746_PJ11_FUNC_LCD_G4>,
 			       <STM32F746_PJ13_FUNC_LCD_B1>,
 			       <STM32F746_PJ14_FUNC_LCD_B2>,
 			       <STM32F746_PJ15_FUNC_LCD_B3>,
 			       <STM32F746_PK0_FUNC_LCD_G5>,
 			       <STM32F746_PK1_FUNC_LCD_G6>,
 			       <STM32F746_PK2_FUNC_LCD_G7>,
 			       <STM32F746_PK4_FUNC_LCD_B5>,
 			       <STM32F746_PK5_FUNC_LCD_B6>,
 			       <STM32F746_PK6_FUNC_LCD_B7>,
 			       <STM32F746_PK7_FUNC_LCD_DE>;
 			slew-rate = <2>;
 		};
 	};
 };

 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &fmc {
 	pinctrl-0 = <&fmc_pins>;
 	pinctrl-names = "default";
 	status = "okay";

 	/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
 	bank1: bank@0 {
 	       st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_4
 	       				    CAS_3 SDCLK_2 RD_BURST_EN
 					    RD_PIPE_DL_0>;
 	       st,sdram-timing = /bits/ 8 <TMRD_2 TXSR_6 TRAS_4 TRC_6 TWR_2
 	       				   TRP_2 TRCD_2>;
 		/* refcount = (64msec/total_row_sdram)*freq - 20 */
 	       st,sdram-refcount = < 1542 >;
        };
 };

 &mac {
 	status = "okay";
 	pinctrl-0 = <&ethernet_mii>;
 	phy-mode = "rmii";
 	phy-handle = <&phy0>;

 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
 		phy0: ethernet-phy@0 {
 			reg = <0>;
 		};
 	};
 };

 &qspi {
 	pinctrl-0 = <&qspi_pins>;
 	status = "okay";

 	qflash0: n25q128a {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "micron,n25q128a13", "jedec,spi-nor";
 			spi-max-frequency = <108000000>;
 			spi-tx-bus-width = <1>;
 			spi-rx-bus-width = <1>;
 			memory-map = <0x90000000 0x1000000>;
 			reg = <0>;
 	};
 };

 &sdio {
 	status = "okay";
 	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "opendrain";
 	pinctrl-0 = <&sdio_pins>;
 	pinctrl-1 = <&sdio_pins_od>;
 	bus-width = <4>;
 	max-frequency = <25000000>;
 };

 &ltdc {
 	status = "okay";
 	pinctrl-0 = <&ltdc_pins>;
 };
	/*
	* Copyright 2016 - Michael Kurz <michi.kurz@gmail.com>
	* Copyright 2016 - Vikas MANOCHA <vikas.manocha@st.com>
	*
	* Based on:
	* stm32f469-disco.dts from Linux
	* Copyright 2016 - Lee Jones <lee.jones@linaro.org>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	/dts-v1/;
	#include "stm32f746.dtsi"
	#include <dt-bindings/memory/stm32-sdram.h>
	#include <dt-bindings/gpio/gpio.h>

	/ {
	model = "STMicroelectronics STM32F746-DISCO board";
	compatible = "st,stm32f746-disco", "st,stm32f746";

	chosen {
	bootargs = "root=/dev/ram rdinit=/linuxrc";
	stdout-path = "serial0:115200n8";
	};

	memory {
	reg = <0xC0000000 0x800000>;
	};

	aliases {
	serial0 = &usart1;
	spi0 = &qspi;
	mmc0 = &sdio;
	/* Aliases for gpios so as to use sequence */
	gpio0 = &gpioa;
	gpio1 = &gpiob;
	gpio2 = &gpioc;
	gpio3 = &gpiod;
	gpio4 = &gpioe;
	gpio5 = &gpiof;
	gpio6 = &gpiog;
	gpio7 = &gpioh;
	gpio8 = &gpioi;
	gpio9 = &gpioj;
	gpio10 = &gpiok;
	};

	led1 {
	compatible = "st,led1";
	led-gpio = <&gpioi 1 0>;
	};

	button1 {
	compatible = "st,button1";
	button-gpio = <&gpioi 11 0>;
	};

	backlight: backlight {
	compatible = "gpio-backlight";
	gpios = <&gpiok 3 0>;
	status = "okay";
	};

	panel-rgb@0 {
	compatible = "simple-panel";
	backlight = <&backlight>;
	enable-gpios = <&gpioi 12 0>;
	status = "okay";

	display-timings {
	timing@0 {
	clock-frequency = <9000000>;
	hactive = <480>;
	vactive = <272>;
	hfront-porch = <2>;
	hback-porch = <2>;
	hsync-len = <41>;
	vfront-porch = <2>;
	vback-porch = <2>;
	vsync-len = <10>;
	hsync-active = <0>;
	vsync-active = <0>;
	de-active = <0>;
	pixelclk-active = <1>;
	};
	};
	};
	};

	&clk_hse {
	clock-frequency = <25000000>;
	};

	&pinctrl {
	usart1_pins_a: usart1@0 {
	pins1 {
	pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
	bias-disable;
	drive-push-pull;
	slew-rate = <2>;
	};
	pins2 {
	pinmux = <STM32F746_PB7_FUNC_USART1_RX>;
	bias-disable;
	};
	};

	ethernet_mii: mii@0 {
	pins {
	pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
	<STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
	<STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
	<STM32F746_PA2_FUNC_ETH_MDIO>,
	<STM32F746_PC1_FUNC_ETH_MDC>,
	<STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
	<STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
	<STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
	<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
	slew-rate = <2>;
	};
	};

	qspi_pins: qspi@0 {
	pins {
	pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
	<STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
	<STM32F746_PD11_FUNC_QUADSPI_BK1_IO0>,
	<STM32F746_PD12_FUNC_QUADSPI_BK1_IO1>,
	<STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
	<STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
	slew-rate = <2>;
	};
	};

	fmc_pins: fmc@0 {
	pins {
	pinmux = <STM32F746_PD10_FUNC_FMC_D15>,
	<STM32F746_PD9_FUNC_FMC_D14>,
	<STM32F746_PD8_FUNC_FMC_D13>,
	<STM32F746_PE15_FUNC_FMC_D12>,
	<STM32F746_PE14_FUNC_FMC_D11>,
	<STM32F746_PE13_FUNC_FMC_D10>,
	<STM32F746_PE12_FUNC_FMC_D9>,
	<STM32F746_PE11_FUNC_FMC_D8>,
	<STM32F746_PE10_FUNC_FMC_D7>,
	<STM32F746_PE9_FUNC_FMC_D6>,
	<STM32F746_PE8_FUNC_FMC_D5>,
	<STM32F746_PE7_FUNC_FMC_D4>,
	<STM32F746_PD1_FUNC_FMC_D3>,
	<STM32F746_PD0_FUNC_FMC_D2>,
	<STM32F746_PD15_FUNC_FMC_D1>,
	<STM32F746_PD14_FUNC_FMC_D0>,

	<STM32F746_PE1_FUNC_FMC_NBL1>,
	<STM32F746_PE0_FUNC_FMC_NBL0>,

	<STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
	<STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,

	<STM32F746_PG1_FUNC_FMC_A11>,
	<STM32F746_PG0_FUNC_FMC_A10>,
	<STM32F746_PF15_FUNC_FMC_A9>,
	<STM32F746_PF14_FUNC_FMC_A8>,
	<STM32F746_PF13_FUNC_FMC_A7>,
	<STM32F746_PF12_FUNC_FMC_A6>,
	<STM32F746_PF5_FUNC_FMC_A5>,
	<STM32F746_PF4_FUNC_FMC_A4>,
	<STM32F746_PF3_FUNC_FMC_A3>,
	<STM32F746_PF2_FUNC_FMC_A2>,
	<STM32F746_PF1_FUNC_FMC_A1>,
	<STM32F746_PF0_FUNC_FMC_A0>,

	<STM32F746_PH3_FUNC_FMC_SDNE0>,
	<STM32F746_PH5_FUNC_FMC_SDNWE>,
	<STM32F746_PF11_FUNC_FMC_SDNRAS>,
	<STM32F746_PG15_FUNC_FMC_SDNCAS>,
	<STM32F746_PC3_FUNC_FMC_SDCKE0>,
	<STM32F746_PG8_FUNC_FMC_SDCLK>;
	slew-rate = <2>;
	};
	};

	ltdc_pins: ltdc@0 {
	pins {
	pinmux = <STM32F746_PE4_FUNC_LCD_B0>,
	<STM32F746_PG12_FUNC_LCD_B4>,
	<STM32F746_PI9_FUNC_LCD_VSYNC>,
	<STM32F746_PI10_FUNC_LCD_HSYNC>,
	<STM32F746_PI14_FUNC_LCD_CLK>,
	<STM32F746_PI15_FUNC_LCD_R0>,
	<STM32F746_PJ0_FUNC_LCD_R1>,
	<STM32F746_PJ1_FUNC_LCD_R2>,
	<STM32F746_PJ2_FUNC_LCD_R3>,
	<STM32F746_PJ3_FUNC_LCD_R4>,
	<STM32F746_PJ4_FUNC_LCD_R5>,
	<STM32F746_PJ5_FUNC_LCD_R6>,
	<STM32F746_PJ6_FUNC_LCD_R7>,
	<STM32F746_PJ7_FUNC_LCD_G0>,
	<STM32F746_PJ8_FUNC_LCD_G1>,
	<STM32F746_PJ9_FUNC_LCD_G2>,
	<STM32F746_PJ10_FUNC_LCD_G3>,
	<STM32F746_PJ11_FUNC_LCD_G4>,
	<STM32F746_PJ13_FUNC_LCD_B1>,
	<STM32F746_PJ14_FUNC_LCD_B2>,
	<STM32F746_PJ15_FUNC_LCD_B3>,
	<STM32F746_PK0_FUNC_LCD_G5>,
	<STM32F746_PK1_FUNC_LCD_G6>,
	<STM32F746_PK2_FUNC_LCD_G7>,
	<STM32F746_PK4_FUNC_LCD_B5>,
	<STM32F746_PK5_FUNC_LCD_B6>,
	<STM32F746_PK6_FUNC_LCD_B7>,
	<STM32F746_PK7_FUNC_LCD_DE>;
	slew-rate = <2>;
	};
	};
	};

	&usart1 {
	pinctrl-0 = <&usart1_pins_a>;
	pinctrl-names = "default";
	status = "okay";
	};

	&fmc {
	pinctrl-0 = <&fmc_pins>;
	pinctrl-names = "default";
	status = "okay";

	/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
	bank1: bank@0 {
	st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_4
	CAS_3 SDCLK_2 RD_BURST_EN
	RD_PIPE_DL_0>;
	st,sdram-timing = /bits/ 8 <TMRD_2 TXSR_6 TRAS_4 TRC_6 TWR_2
	TRP_2 TRCD_2>;
	/* refcount = (64msec/total_row_sdram)freq - 20 /
	st,sdram-refcount = < 1542 >;
	};
	};

	&mac {
	status = "okay";
	pinctrl-0 = <&ethernet_mii>;
	phy-mode = "rmii";
	phy-handle = <&phy0>;

	mdio0 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "snps,dwmac-mdio";
	phy0: ethernet-phy@0 {
	reg = <0>;
	};
	};
	};

	&qspi {
	pinctrl-0 = <&qspi_pins>;
	status = "okay";

	qflash0: n25q128a {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "micron,n25q128a13", "jedec,spi-nor";
	spi-max-frequency = <108000000>;
	spi-tx-bus-width = <1>;
	spi-rx-bus-width = <1>;
	memory-map = <0x90000000 0x1000000>;
	reg = <0>;
	};
	};

	&sdio {
	status = "okay";
	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default", "opendrain";
	pinctrl-0 = <&sdio_pins>;
	pinctrl-1 = <&sdio_pins_od>;
	bus-width = <4>;
	max-frequency = <25000000>;
	};

	&ltdc {
	status = "okay";
	pinctrl-0 = <&ltdc_pins>;
	};