blob: b074cc6c51ebc2cdff14676ffefdf80fd5ee675f [file] [log] [blame]
config ARCH_MAP_SYSMEM
depends on SANDBOX
def_bool y
config CREATE_ARCH_SYMLINK
bool
config HAVE_ARCH_IOREMAP
bool
config SYS_CACHE_SHIFT_4
bool
config SYS_CACHE_SHIFT_5
bool
config SYS_CACHE_SHIFT_6
bool
config SYS_CACHE_SHIFT_7
bool
config SYS_CACHELINE_SIZE
int
default 128 if SYS_CACHE_SHIFT_7
default 64 if SYS_CACHE_SHIFT_6
default 32 if SYS_CACHE_SHIFT_5
default 16 if SYS_CACHE_SHIFT_4
# Fall-back for MIPS
default 32 if MIPS
config LINKER_LIST_ALIGN
int
default 32 if SANDBOX
default 8 if ARM64 || X86
default 4
help
Force the each linker list to be aligned to this boundary. This
is required if ll_entry_get() is used, since otherwise the linker
may add padding into the table, thus breaking it.
See linker_lists.rst for full details.
choice
prompt "Architecture select"
default SANDBOX
config ARC
bool "ARC architecture"
select ARC_TIMER
select CLK
select DM
select HAVE_PRIVATE_LIBGCC
select SUPPORT_OF_CONTROL
select SYS_CACHE_SHIFT_7
select TIMER
select SYS_BIG_ENDIAN if CPU_BIG_ENDIAN
select SYS_LITTLE_ENDIAN if !CPU_BIG_ENDIAN
config ARM
bool "ARM architecture"
select ARCH_SUPPORTS_LTO
select CREATE_ARCH_SYMLINK
select HAVE_PRIVATE_LIBGCC if !ARM64
select SUPPORT_ACPI
select SUPPORT_OF_CONTROL
config M68K
bool "M68000 architecture"
select HAVE_PRIVATE_LIBGCC
select NEEDS_MANUAL_RELOC
select SYS_BOOT_GET_CMDLINE
select SYS_BOOT_GET_KBD
select SYS_CACHE_SHIFT_4
select SUPPORT_OF_CONTROL
config MICROBLAZE
bool "MicroBlaze architecture"
select SUPPORT_OF_CONTROL
imply CMD_TIMER
imply SPL_REGMAP if SPL
imply SPL_TIMER if SPL
imply TIMER
imply XILINX_TIMER
config MIPS
bool "MIPS architecture"
select HAVE_ARCH_IOREMAP
select HAVE_PRIVATE_LIBGCC
select SUPPORT_OF_CONTROL
select SPL_SEPARATE_BSS if SPL
config NIOS2
bool "Nios II architecture"
select CPU
select DM
imply DM_EVENT
select OF_CONTROL
select SUPPORT_OF_CONTROL
imply CMD_DM
config PPC
bool "PowerPC architecture"
select HAVE_PRIVATE_LIBGCC
select SUPPORT_OF_CONTROL
select SYS_BOOT_GET_CMDLINE
select SYS_BOOT_GET_KBD
config RISCV
bool "RISC-V architecture"
select CREATE_ARCH_SYMLINK
select SUPPORT_OF_CONTROL
select OF_CONTROL
select DM
select SPL_SEPARATE_BSS if SPL
imply DM_SERIAL
imply DM_EVENT
imply DM_MMC
imply DM_SPI
imply DM_SPI_FLASH
imply BLK
imply CLK
imply MTD
imply TIMER
imply CMD_DM
imply SPL_DM
imply SPL_OF_CONTROL
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL
imply SPL_TIMER
config SANDBOX
bool "Sandbox"
select ARCH_SUPPORTS_LTO
select BOARD_LATE_INIT
select BZIP2
select CMD_POWEROFF
select DM
select DM_FUZZING_ENGINE
select DM_GPIO
select DM_I2C
select DM_KEYBOARD
select DM_MMC
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
select GZIP_COMPRESSED
select IO_TRACE
select LZO
select OF_BOARD_SETUP
select PCI_ENDPOINT
select SPI
select SUPPORT_OF_CONTROL
select SYSRESET_CMD_POWEROFF
select SYS_CACHE_SHIFT_4
select IRQ
select SUPPORT_EXTENSION_SCAN
select SUPPORT_ACPI
imply BITREVERSE
select BLOBLIST
imply LTO
imply CMD_DM
imply CMD_EXCEPTION
imply CMD_GETTIME
imply CMD_HASH
imply CMD_IO
imply CMD_IOTRACE
imply CMD_LZMADEC
imply CMD_SF
imply CMD_SF_TEST
imply CRC32_VERIFY
imply FAT_WRITE
imply FIRMWARE
imply FUZZING_ENGINE_SANDBOX
imply HASH_VERIFY
imply LZMA
imply TEE
imply AVB_VERIFY
imply LIBAVB
imply CMD_AVB
imply PARTITION_TYPE_GUID
imply SCP03
imply CMD_SCP03
imply UDP_FUNCTION_FASTBOOT
imply VIRTIO_MMIO
imply VIRTIO_PCI
imply VIRTIO_SANDBOX
imply VIRTIO_BLK
imply VIRTIO_NET
imply DM_SOUND
imply PCI_SANDBOX_EP
imply PCH
imply PHYLIB
imply DM_MDIO
imply DM_MDIO_MUX
imply ACPI_PMC
imply ACPI_PMC_SANDBOX
imply CMD_PMC
imply CMD_CLONE
imply SILENT_CONSOLE
imply BOOTARGS_SUBST
imply PHY_FIXED
imply DM_DSA
imply CMD_EXTENSION
imply KEYBOARD
imply PHYSMEM
imply GENERATE_ACPI_TABLE
imply BINMAN
config SH
bool "SuperH architecture"
select HAVE_PRIVATE_LIBGCC
select SUPPORT_OF_CONTROL
config X86
bool "x86 architecture"
select SUPPORT_SPL
select SUPPORT_TPL
select CREATE_ARCH_SYMLINK
select DM
select HAVE_ARCH_IOMAP
select HAVE_PRIVATE_LIBGCC
select OF_CONTROL
select PCI
select SUPPORT_ACPI
select SUPPORT_OF_CONTROL
select SYS_CACHE_SHIFT_6
select TIMER
select USE_PRIVATE_LIBGCC
select X86_TSC_TIMER
select IRQ
imply HAS_ROM if X86_RESET_VECTOR
imply BLK
imply CMD_DM
imply CMD_FPGA_LOADMK
imply CMD_GETTIME
imply CMD_IO
imply CMD_IRQ
imply CMD_PCI
imply CMD_SF
imply CMD_SF_TEST
imply CMD_ZBOOT
imply DM_EVENT
imply DM_GPIO
imply DM_KEYBOARD
imply DM_MMC
imply DM_RTC
imply DM_SCSI
imply DM_SERIAL
imply DM_SPI
imply DM_SPI_FLASH
imply DM_USB
imply VIDEO
imply SYSRESET
imply SPL_SYSRESET
imply SYSRESET_X86
imply USB_ETHER_ASIX
imply USB_ETHER_SMSC95XX
imply USB_HOST_ETHER
imply PCH
imply PHYSMEM
imply RTC_MC146818
imply ACPIGEN if !QEMU && !EFI_APP
imply SYSINFO if GENERATE_SMBIOS_TABLE
imply SYSINFO_SMBIOS if GENERATE_SMBIOS_TABLE
imply TIMESTAMP
# Thing to enable for when SPL/TPL are enabled: SPL
imply SPL_DM
imply SPL_OF_LIBFDT
imply SPL_DRIVERS_MISC
imply SPL_GPIO
imply SPL_PINCTRL
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI
imply SPL_OF_CONTROL
imply SPL_TIMER
imply SPL_REGMAP
imply SPL_SYSCON
# TPL
imply TPL_DM
imply TPL_DRIVERS_MISC
imply TPL_GPIO
imply TPL_PINCTRL
imply TPL_LIBCOMMON_SUPPORT
imply TPL_LIBGENERIC_SUPPORT
imply TPL_SERIAL
imply TPL_OF_CONTROL
imply TPL_TIMER
imply TPL_REGMAP
imply TPL_SYSCON
config XTENSA
bool "Xtensa architecture"
select CREATE_ARCH_SYMLINK
select SUPPORT_OF_CONTROL
endchoice
config SYS_ARCH
string
help
This option should contain the architecture name to build the
appropriate arch/<CONFIG_SYS_ARCH> directory.
All the architectures should specify this option correctly.
config SYS_CPU
string
help
This option should contain the CPU name to build the correct
arch/<CONFIG_SYS_ARCH>/cpu/<CONFIG_SYS_CPU> directory.
This is optional. For those targets without the CPU directory,
leave this option empty.
config SYS_SOC
string
help
This option should contain the SoC name to build the directory
arch/<CONFIG_SYS_ARCH>/cpu/<CONFIG_SYS_CPU>/<CONFIG_SYS_SOC>.
This is optional. For those targets without the SoC directory,
leave this option empty.
config SYS_VENDOR
string
help
This option should contain the vendor name of the target board.
If it is set and
board/<CONFIG_SYS_VENDOR>/common/Makefile exists, the vendor common
directory is compiled.
If CONFIG_SYS_BOARD is also set, the sources under
board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> directory are compiled.
This is optional. For those targets without the vendor directory,
leave this option empty.
config SYS_BOARD
string
help
This option should contain the name of the target board.
If it is set, either board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD>
or board/<CONFIG_SYS_BOARD> directory is compiled depending on
whether CONFIG_SYS_VENDOR is set or not.
This is optional. For those targets without the board directory,
leave this option empty.
config SYS_CONFIG_NAME
string
help
This option should contain the base name of board header file.
The header file include/configs/<CONFIG_SYS_CONFIG_NAME>.h
should be included from include/config.h.
config SYS_DISABLE_DCACHE_OPS
bool
help
This option disables dcache flush and dcache invalidation
operations. For example, on coherent systems where cache
operatios are not required, enable this option to avoid them.
Note that, its up to the individual architectures to implement
this functionality.
config SYS_IMMR
hex "Address for the Internal Memory-Mapped Registers (IMMR) window"
depends on PPC || FSL_LSCH2 || FSL_LSCH3 || ARCH_LS1021A
default 0xFF000000 if MPC8xx
default 0xF0000000 if ARCH_MPC8313
default 0xE0000000 if MPC83xx && !ARCH_MPC8313
default 0x01000000 if ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
default 0xFFE00000 if ARCH_P1010 || ARCH_P1011 || ARCH_P1020 || \
ARCH_P1021 || ARCH_P1024 || ARCH_P1025 || \
ARCH_P2020
default SYS_CCSRBAR_DEFAULT
help
Address for the Internal Memory-Mapped Registers (IMMR) window used
to configure the features of many Freescale / NXP SoCs.
config SKIP_LOWLEVEL_INIT
bool "Skip the calls to certain low level initialization functions"
depends on ARM || MIPS || RISCV
help
If enabled, then certain low level initializations (like setting up
the memory controller) are omitted and/or U-Boot does not relocate
itself into RAM.
Normally this variable MUST NOT be defined. The only exception is
when U-Boot is loaded (to RAM) by some other boot loader or by a
debugger which performs these initializations itself.
config SPL_SKIP_LOWLEVEL_INIT
bool "Skip the calls to certain low level initialization functions"
depends on SPL && (ARM || MIPS || RISCV)
help
If enabled, then certain low level initializations (like setting up
the memory controller) are omitted and/or U-Boot does not relocate
itself into RAM.
Normally this variable MUST NOT be defined. The only exception is
when U-Boot is loaded (to RAM) by some other boot loader or by a
debugger which performs these initializations itself.
config TPL_SKIP_LOWLEVEL_INIT
bool "Skip the calls to certain low level initialization functions"
depends on SPL && ARM
help
If enabled, then certain low level initializations (like setting up
the memory controller) are omitted and/or U-Boot does not relocate
itself into RAM.
Normally this variable MUST NOT be defined. The only exception is
when U-Boot is loaded (to RAM) by some other boot loader or by a
debugger which performs these initializations itself.
config SKIP_LOWLEVEL_INIT_ONLY
bool "Skip the call to lowlevel_init during early boot ONLY"
depends on ARM
help
This allows just the call to lowlevel_init() to be skipped. The
normal CP15 init (such as enabling the instruction cache) is still
performed.
config SPL_SKIP_LOWLEVEL_INIT_ONLY
bool "Skip the call to lowlevel_init during early boot ONLY"
depends on SPL && ARM
help
This allows just the call to lowlevel_init() to be skipped. The
normal CP15 init (such as enabling the instruction cache) is still
performed.
config TPL_SKIP_LOWLEVEL_INIT_ONLY
bool "Skip the call to lowlevel_init during early boot ONLY"
depends on TPL && ARM
help
This allows just the call to lowlevel_init() to be skipped. The
normal CP15 init (such as enabling the instruction cache) is still
performed.
config SYS_HAS_NONCACHED_MEMORY
bool "Enable reserving a non-cached memory area for drivers"
depends on (ARM || MIPS) && (RTL8169 || MEDIATEK_ETH)
help
This is useful for drivers that would otherwise require a lot of
explicit cache maintenance. For some drivers it's also impossible to
properly maintain the cache. For example if the regions that need to
be flushed are not a multiple of the cache-line size, *and* padding
cannot be allocated between the regions to align them (i.e. if the
HW requires a contiguous array of regions, and the size of each
region is not cache-aligned), then a flush of one region may result
in overwriting data that hardware has written to another region in
the same cache-line. This can happen for example in network drivers
where descriptors for buffers are typically smaller than the CPU
cache-line (e.g. 16 bytes vs. 32 or 64 bytes).
config SYS_NONCACHED_MEMORY
hex "Size in bytes of the non-cached memory area"
depends on SYS_HAS_NONCACHED_MEMORY
default 0x100000
help
Size of non-cached memory area. This area of memory will be typically
located right below the malloc() area and mapped uncached in the MMU.
source "arch/arc/Kconfig"
source "arch/arm/Kconfig"
source "arch/m68k/Kconfig"
source "arch/microblaze/Kconfig"
source "arch/mips/Kconfig"
source "arch/nios2/Kconfig"
source "arch/powerpc/Kconfig"
source "arch/sandbox/Kconfig"
source "arch/sh/Kconfig"
source "arch/x86/Kconfig"
source "arch/xtensa/Kconfig"
source "arch/riscv/Kconfig"
if ARM || M68K || PPC
source "arch/Kconfig.nxp"
endif
source "board/keymile/Kconfig"
if MIPS || MICROBLAZE
choice
prompt "Endianness selection"
help
Some MIPS boards can be configured for either little or big endian
byte order. These modes require different U-Boot images. In general there
is one preferred byteorder for a particular system but some systems are
just as commonly used in the one or the other endianness.
config SYS_BIG_ENDIAN
bool "Big endian"
depends on (SUPPORTS_BIG_ENDIAN && MIPS) || MICROBLAZE
config SYS_LITTLE_ENDIAN
bool "Little endian"
depends on (SUPPORTS_LITTLE_ENDIAN && MIPS) || MICROBLAZE
endchoice
endif