| /* |
| * (C) Copyright 2002,2003, Motorola Inc. |
| * Xianghua Xiao, (X.Xiao@motorola.com) |
| * |
| * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| #include <asm/immap_85xx.h> |
| #include <spd_sdram.h> |
| |
| long int fixed_sdram (void); |
| |
| int board_pre_init (void) |
| { |
| #if defined(CONFIG_PCI) |
| volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR); |
| |
| pci->peer &= 0xffffffdf; /* disable master abort */ |
| #endif |
| return 0; |
| } |
| |
| int checkboard (void) |
| { |
| sys_info_t sysinfo; |
| |
| get_sys_info (&sysinfo); |
| |
| printf ("Board: Freescale MPC8540EVAL Board\n"); |
| printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); |
| printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000); |
| printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000); |
| if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \ |
| || (CFG_LBC_LCRR & 0x0f) == 8) { |
| printf ("\tLBC: %lu MHz\n", |
| sysinfo.freqSystemBus / 1000000/(CFG_LBC_LCRR & 0x0f)); |
| } else { |
| printf("\tLBC: unknown\n"); |
| } |
| printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); |
| return (0); |
| } |
| |
| phys_size_t initdram (int board_type) |
| { |
| long dram_size = 0; |
| |
| #if !defined(CONFIG_RAM_AS_FLASH) |
| volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); |
| sys_info_t sysinfo; |
| uint temp_lbcdll = 0; |
| #endif |
| #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) |
| volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); |
| #endif |
| |
| #if defined(CONFIG_DDR_DLL) |
| uint temp_ddrdll = 0; |
| |
| /* Work around to stabilize DDR DLL */ |
| temp_ddrdll = gur->ddrdllcr; |
| gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; |
| asm("sync;isync;msync"); |
| #endif |
| |
| #if defined(CONFIG_SPD_EEPROM) |
| dram_size = spd_sdram (); |
| #else |
| dram_size = fixed_sdram (); |
| #endif |
| |
| #if defined(CFG_RAMBOOT) |
| return dram_size; |
| #endif |
| |
| #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */ |
| get_sys_info(&sysinfo); |
| /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */ |
| if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) { |
| lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000; |
| } else { |
| lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff; |
| udelay(200); |
| temp_lbcdll = gur->lbcdllcr; |
| gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; |
| asm("sync;isync;msync"); |
| } |
| lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */ |
| lbc->br2 = CFG_BR2_PRELIM; |
| lbc->lbcr = CFG_LBC_LBCR; |
| lbc->lsdmr = CFG_LBC_LSDMR_1; |
| asm("sync"); |
| * (ulong *)0 = 0x000000ff; |
| lbc->lsdmr = CFG_LBC_LSDMR_2; |
| asm("sync"); |
| * (ulong *)0 = 0x000000ff; |
| lbc->lsdmr = CFG_LBC_LSDMR_3; |
| asm("sync"); |
| * (ulong *)0 = 0x000000ff; |
| lbc->lsdmr = CFG_LBC_LSDMR_4; |
| asm("sync"); |
| * (ulong *)0 = 0x000000ff; |
| lbc->lsdmr = CFG_LBC_LSDMR_5; |
| asm("sync"); |
| lbc->lsrt = CFG_LBC_LSRT; |
| asm("sync"); |
| lbc->mrtpr = CFG_LBC_MRTPR; |
| asm("sync"); |
| #endif |
| |
| #if defined(CONFIG_DDR_ECC) |
| { |
| /* Initialize all of memory for ECC, then |
| * enable errors */ |
| uint *p = 0; |
| uint i = 0; |
| volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); |
| dma_init(); |
| for (*p = 0; p < (uint *)(8 * 1024); p++) { |
| if (((unsigned int)p & 0x1f) == 0) { dcbz(p); } |
| *p = (unsigned int)0xdeadbeef; |
| if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); } |
| } |
| |
| /* 8K */ |
| dma_xfer((uint *)0x2000,0x2000,(uint *)0); |
| /* 16K */ |
| dma_xfer((uint *)0x4000,0x4000,(uint *)0); |
| /* 32K */ |
| dma_xfer((uint *)0x8000,0x8000,(uint *)0); |
| /* 64K */ |
| dma_xfer((uint *)0x10000,0x10000,(uint *)0); |
| /* 128k */ |
| dma_xfer((uint *)0x20000,0x20000,(uint *)0); |
| /* 256k */ |
| dma_xfer((uint *)0x40000,0x40000,(uint *)0); |
| /* 512k */ |
| dma_xfer((uint *)0x80000,0x80000,(uint *)0); |
| /* 1M */ |
| dma_xfer((uint *)0x100000,0x100000,(uint *)0); |
| /* 2M */ |
| dma_xfer((uint *)0x200000,0x200000,(uint *)0); |
| /* 4M */ |
| dma_xfer((uint *)0x400000,0x400000,(uint *)0); |
| |
| for (i = 1; i < dram_size / 0x800000; i++) { |
| dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0); |
| } |
| |
| /* Enable errors for ECC */ |
| ddr->err_disable = 0x00000000; |
| asm("sync;isync;msync"); |
| } |
| #endif |
| |
| return dram_size; |
| } |
| |
| #if defined(CFG_DRAM_TEST) |
| int testdram (void) |
| { |
| uint *pstart = (uint *) CFG_MEMTEST_START; |
| uint *pend = (uint *) CFG_MEMTEST_END; |
| uint *p; |
| |
| printf("SDRAM test phase 1:\n"); |
| for (p = pstart; p < pend; p++) |
| *p = 0xaaaaaaaa; |
| |
| for (p = pstart; p < pend; p++) { |
| if (*p != 0xaaaaaaaa) { |
| printf ("SDRAM test fails at: %08x\n", (uint) p); |
| return 1; |
| } |
| } |
| |
| printf("SDRAM test phase 2:\n"); |
| for (p = pstart; p < pend; p++) |
| *p = 0x55555555; |
| |
| for (p = pstart; p < pend; p++) { |
| if (*p != 0x55555555) { |
| printf ("SDRAM test fails at: %08x\n", (uint) p); |
| return 1; |
| } |
| } |
| |
| printf("SDRAM test passed.\n"); |
| return 0; |
| } |
| #endif |
| |
| #if !defined(CONFIG_SPD_EEPROM) |
| /************************************************************************* |
| * fixed sdram init -- doesn't use serial presence detect. |
| ************************************************************************/ |
| long int fixed_sdram (void) |
| { |
| #ifndef CFG_RAMBOOT |
| volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); |
| |
| ddr->cs0_bnds = CFG_DDR_CS0_BNDS; |
| ddr->cs0_config = CFG_DDR_CS0_CONFIG; |
| ddr->timing_cfg_1 = CFG_DDR_TIMING_1; |
| ddr->timing_cfg_2 = CFG_DDR_TIMING_2; |
| ddr->sdram_mode = CFG_DDR_MODE; |
| ddr->sdram_interval = CFG_DDR_INTERVAL; |
| #if defined (CONFIG_DDR_ECC) |
| ddr->err_disable = 0x0000000D; |
| ddr->err_sbe = 0x00ff0000; |
| #endif |
| asm("sync;isync;msync"); |
| udelay(500); |
| #if defined (CONFIG_DDR_ECC) |
| /* Enable ECC checking */ |
| ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); |
| #else |
| ddr->sdram_cfg = CFG_DDR_CONTROL; |
| #endif |
| asm("sync; isync; msync"); |
| udelay(500); |
| #endif |
| return (CFG_SDRAM_SIZE * 1024 * 1024); |
| } |
| #endif /* !defined(CONFIG_SPD_EEPROM) */ |