| /* |
| * Common part of configuration settings for the AT91 SAMA5 board. |
| * |
| * Copyright (C) 2015 Atmel Corporation |
| * Josh Wu <josh.wu@atmel.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __AT91_SAMA5_COMMON_H |
| #define __AT91_SAMA5_COMMON_H |
| |
| /* ARM asynchronous clock */ |
| #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 |
| #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ |
| |
| #define CONFIG_ARCH_CPU_INIT |
| |
| #ifndef CONFIG_SPL_BUILD |
| #define CONFIG_SKIP_LOWLEVEL_INIT |
| #endif |
| |
| /* general purpose I/O */ |
| #ifndef CONFIG_DM_GPIO |
| #define CONFIG_AT91_GPIO |
| #endif |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| |
| /* |
| * Command line configuration. |
| */ |
| |
| #ifdef CONFIG_SD_BOOT |
| |
| #ifdef CONFIG_ENV_IS_IN_MMC |
| /* Use raw reserved sectors to save environment */ |
| #define CONFIG_ENV_OFFSET 0x2000 |
| #define CONFIG_ENV_SIZE 0x1000 |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| #else |
| /* u-boot env in sd/mmc card */ |
| #define CONFIG_ENV_SIZE 0x4000 |
| #endif |
| |
| #define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ |
| "setenv dtb_name at91-${board_name}.dtb; " \ |
| "fi; " \ |
| "fatload mmc 0:1 0x21000000 ${dtb_name}; " \ |
| "fatload mmc 0:1 0x22000000 zImage; " \ |
| "bootz 0x22000000 - 0x21000000" |
| |
| #else |
| |
| #ifdef CONFIG_NAND_BOOT |
| /* u-boot env in nand flash */ |
| #define CONFIG_ENV_OFFSET 0xc0000 |
| #define CONFIG_ENV_OFFSET_REDUND 0x100000 |
| #define CONFIG_ENV_SIZE 0x20000 |
| #define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ |
| "nand read 0x22000000 0x200000 0x600000;" \ |
| "bootz 0x22000000 - 0x21000000" |
| #elif CONFIG_SPI_BOOT |
| /* u-boot env in serial flash, by default is bus 0 and cs 0 */ |
| #define CONFIG_ENV_OFFSET 0x6000 |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_SECT_SIZE 0x1000 |
| #define CONFIG_BOOTCOMMAND "sf probe 0; " \ |
| "sf read 0x21000000 0x60000 0xc000; " \ |
| "sf read 0x22000000 0x6c000 0x394000; " \ |
| "bootz 0x22000000 - 0x21000000" |
| #endif |
| |
| #endif |
| |
| /* Size of malloc() pool */ |
| #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) |
| |
| #endif |