blob: 50199ff46ef9f43d7f6c2964f5c852e7ec293380 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Marvell International Ltd.
*/
#include <clk.h>
#include <dm.h>
#include <i2c.h>
#include <time.h>
#include <asm/io.h>
#include <linux/bitfield.h>
#include <linux/compat.h>
#include <linux/delay.h>
#define TWSI_SW_TWSI 0x00
#define TWSI_TWSI_SW 0x08
#define TWSI_INT 0x10
#define TWSI_SW_TWSI_EXT 0x18
#define TWSI_SW_DATA_MASK GENMASK_ULL(31, 0)
#define TWSI_SW_EOP_IA_MASK GENMASK_ULL(34, 32)
#define TWSI_SW_IA_MASK GENMASK_ULL(39, 35)
#define TWSI_SW_ADDR_MASK GENMASK_ULL(49, 40)
#define TWSI_SW_SCR_MASK GENMASK_ULL(51, 50)
#define TWSI_SW_SIZE_MASK GENMASK_ULL(54, 52)
#define TWSI_SW_SOVR BIT_ULL(55)
#define TWSI_SW_R BIT_ULL(56)
#define TWSI_SW_OP_MASK GENMASK_ULL(60, 57)
#define TWSI_SW_EIA GENMASK_ULL(61)
#define TWSI_SW_SLONLY BIT_ULL(62)
#define TWSI_SW_V BIT_ULL(63)
#define TWSI_INT_SDA_OVR BIT_ULL(8)
#define TWSI_INT_SCL_OVR BIT_ULL(9)
#define TWSI_INT_SDA BIT_ULL(10)
#define TWSI_INT_SCL BIT_ULL(11)
enum {
TWSI_OP_WRITE = 0,
TWSI_OP_READ = 1,
};
enum {
TWSI_EOP_SLAVE_ADDR = 0,
TWSI_EOP_CLK_CTL = 3,
TWSI_SW_EOP_IA = 6,
};
enum {
TWSI_SLAVEADD = 0,
TWSI_DATA = 1,
TWSI_CTL = 2,
TWSI_CLKCTL = 3,
TWSI_STAT = 3,
TWSI_SLAVEADD_EXT = 4,
TWSI_RST = 7,
};
enum {
TWSI_CTL_AAK = BIT(2),
TWSI_CTL_IFLG = BIT(3),
TWSI_CTL_STP = BIT(4),
TWSI_CTL_STA = BIT(5),
TWSI_CTL_ENAB = BIT(6),
TWSI_CTL_CE = BIT(7),
};
/*
* Internal errors. When debugging is enabled, the driver will report the
* error number and the user / developer can check the table below for the
* detailed error description.
*/
enum {
/** Bus error */
TWSI_STAT_BUS_ERROR = 0x00,
/** Start condition transmitted */
TWSI_STAT_START = 0x08,
/** Repeat start condition transmitted */
TWSI_STAT_RSTART = 0x10,
/** Address + write bit transmitted, ACK received */
TWSI_STAT_TXADDR_ACK = 0x18,
/** Address + write bit transmitted, /ACK received */
TWSI_STAT_TXADDR_NAK = 0x20,
/** Data byte transmitted in master mode, ACK received */
TWSI_STAT_TXDATA_ACK = 0x28,
/** Data byte transmitted in master mode, ACK received */
TWSI_STAT_TXDATA_NAK = 0x30,
/** Arbitration lost in address or data byte */
TWSI_STAT_TX_ARB_LOST = 0x38,
/** Address + read bit transmitted, ACK received */
TWSI_STAT_RXADDR_ACK = 0x40,
/** Address + read bit transmitted, /ACK received */
TWSI_STAT_RXADDR_NAK = 0x48,
/** Data byte received in master mode, ACK transmitted */
TWSI_STAT_RXDATA_ACK_SENT = 0x50,
/** Data byte received, NACK transmitted */
TWSI_STAT_RXDATA_NAK_SENT = 0x58,
/** Slave address received, sent ACK */
TWSI_STAT_SLAVE_RXADDR_ACK = 0x60,
/**
* Arbitration lost in address as master, slave address + write bit
* received, ACK transmitted
*/
TWSI_STAT_TX_ACK_ARB_LOST = 0x68,
/** General call address received, ACK transmitted */
TWSI_STAT_RX_GEN_ADDR_ACK = 0x70,
/**
* Arbitration lost in address as master, general call address
* received, ACK transmitted
*/
TWSI_STAT_RX_GEN_ADDR_ARB_LOST = 0x78,
/** Data byte received after slave address received, ACK transmitted */
TWSI_STAT_SLAVE_RXDATA_ACK = 0x80,
/** Data byte received after slave address received, /ACK transmitted */
TWSI_STAT_SLAVE_RXDATA_NAK = 0x88,
/**
* Data byte received after general call address received, ACK
* transmitted
*/
TWSI_STAT_GEN_RXADDR_ACK = 0x90,
/**
* Data byte received after general call address received, /ACK
* transmitted
*/
TWSI_STAT_GEN_RXADDR_NAK = 0x98,
/** STOP or repeated START condition received in slave mode */
TWSI_STAT_STOP_MULTI_START = 0xa0,
/** Slave address + read bit received, ACK transmitted */
TWSI_STAT_SLAVE_RXADDR2_ACK = 0xa8,
/**
* Arbitration lost in address as master, slave address + read bit
* received, ACK transmitted
*/
TWSI_STAT_RXDATA_ACK_ARB_LOST = 0xb0,
/** Data byte transmitted in slave mode, ACK received */
TWSI_STAT_SLAVE_TXDATA_ACK = 0xb8,
/** Data byte transmitted in slave mode, /ACK received */
TWSI_STAT_SLAVE_TXDATA_NAK = 0xc0,
/** Last byte transmitted in slave mode, ACK received */
TWSI_STAT_SLAVE_TXDATA_END_ACK = 0xc8,
/** Second address byte + write bit transmitted, ACK received */
TWSI_STAT_TXADDR2DATA_ACK = 0xd0,
/** Second address byte + write bit transmitted, /ACK received */
TWSI_STAT_TXADDR2DATA_NAK = 0xd8,
/** No relevant status information */
TWSI_STAT_IDLE = 0xf8
};
#define CONFIG_SYS_I2C_OCTEON_SLAVE_ADDR 0x77
enum {
PROBE_PCI = 0, /* PCI based probing */
PROBE_DT, /* DT based probing */
};
enum {
CLK_METHOD_OCTEON = 0,
CLK_METHOD_OCTEONTX2,
};
/**
* struct octeon_i2c_data - SoC specific data of this driver
*
* @probe: Probing of this SoC (DT vs PCI)
* @reg_offs: Register offset
* @thp: THP define for divider calculation
* @clk_method: Clock calculation method
*/
struct octeon_i2c_data {
int probe;
u32 reg_offs;
int thp;
int clk_method;
};
/**
* struct octeon_twsi - Private data of this driver
*
* @base: Base address of i2c registers
* @data: Pointer to SoC specific data struct
*/
struct octeon_twsi {
void __iomem *base;
const struct octeon_i2c_data *data;
struct clk clk;
};
static void twsi_unblock(void *base);
static int twsi_stop(void *base);
/**
* Returns true if we lost arbitration
*
* @code status code
* @final_read true if this is the final read operation
* Return: true if arbitration has been lost, false if it hasn't been lost.
*/
static int twsi_i2c_lost_arb(u8 code, int final_read)
{
switch (code) {
case TWSI_STAT_TX_ARB_LOST:
case TWSI_STAT_TX_ACK_ARB_LOST:
case TWSI_STAT_RX_GEN_ADDR_ARB_LOST:
case TWSI_STAT_RXDATA_ACK_ARB_LOST:
/* Arbitration lost */
return -EAGAIN;
case TWSI_STAT_SLAVE_RXADDR_ACK:
case TWSI_STAT_RX_GEN_ADDR_ACK:
case TWSI_STAT_GEN_RXADDR_ACK:
case TWSI_STAT_GEN_RXADDR_NAK:
/* Being addressed as slave, should back off and listen */
return -EIO;
case TWSI_STAT_SLAVE_RXDATA_ACK:
case TWSI_STAT_SLAVE_RXDATA_NAK:
case TWSI_STAT_STOP_MULTI_START:
case TWSI_STAT_SLAVE_RXADDR2_ACK:
case TWSI_STAT_SLAVE_TXDATA_ACK:
case TWSI_STAT_SLAVE_TXDATA_NAK:
case TWSI_STAT_SLAVE_TXDATA_END_ACK:
/* Core busy as slave */
return -EIO;
case TWSI_STAT_RXDATA_ACK_SENT:
/* Ack allowed on pre-terminal bytes only */
if (!final_read)
return 0;
return -EAGAIN;
case TWSI_STAT_RXDATA_NAK_SENT:
/* NAK allowed on terminal byte only */
if (!final_read)
return 0;
return -EAGAIN;
case TWSI_STAT_TXDATA_NAK:
case TWSI_STAT_TXADDR_NAK:
case TWSI_STAT_RXADDR_NAK:
case TWSI_STAT_TXADDR2DATA_NAK:
return -EAGAIN;
}
return 0;
}
/**
* Writes to the MIO_TWS(0..5)_SW_TWSI register
*
* @base Base address of i2c registers
* @val value to write
* Return: 0 for success, otherwise error
*/
static u64 twsi_write_sw(void __iomem *base, u64 val)
{
unsigned long start = get_timer(0);
val &= ~TWSI_SW_R;
val |= TWSI_SW_V;
debug("%s(%p, 0x%llx)\n", __func__, base, val);
writeq(val, base + TWSI_SW_TWSI);
do {
val = readq(base + TWSI_SW_TWSI);
} while ((val & TWSI_SW_V) && (get_timer(start) < 50));
if (val & TWSI_SW_V)
debug("%s: timed out\n", __func__);
return val;
}
/**
* Reads the MIO_TWS(0..5)_SW_TWSI register
*
* @base Base address of i2c registers
* @val value for eia and op, etc. to read
* Return: value of the register
*/
static u64 twsi_read_sw(void __iomem *base, u64 val)
{
unsigned long start = get_timer(0);
val |= TWSI_SW_R | TWSI_SW_V;
debug("%s(%p, 0x%llx)\n", __func__, base, val);
writeq(val, base + TWSI_SW_TWSI);
do {
val = readq(base + TWSI_SW_TWSI);
} while ((val & TWSI_SW_V) && (get_timer(start) < 50));
if (val & TWSI_SW_V)
debug("%s: Error writing 0x%llx\n", __func__, val);
debug("%s: Returning 0x%llx\n", __func__, val);
return val;
}
/**
* Write control register
*
* @base Base address for i2c registers
* @data data to write
*/
static void twsi_write_ctl(void __iomem *base, u8 data)
{
u64 val;
debug("%s(%p, 0x%x)\n", __func__, base, data);
val = data | FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CTL) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
twsi_write_sw(base, val);
}
/**
* Reads the TWSI Control Register
*
* @base Base address for i2c
* Return: 8-bit TWSI control register
*/
static u8 twsi_read_ctl(void __iomem *base)
{
u64 val;
val = FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CTL) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
val = twsi_read_sw(base, val);
debug("%s(%p): 0x%x\n", __func__, base, (u8)val);
return (u8)val;
}
/**
* Read i2c status register
*
* @base Base address of i2c registers
* Return: value of status register
*/
static u8 twsi_read_status(void __iomem *base)
{
u64 val;
val = FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_STAT) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
return twsi_read_sw(base, val);
}
/**
* Waits for an i2c operation to complete
*
* @param base Base address of registers
* Return: 0 for success, 1 if timeout
*/
static int twsi_wait(void __iomem *base)
{
unsigned long start = get_timer(0);
u8 twsi_ctl;
debug("%s(%p)\n", __func__, base);
do {
twsi_ctl = twsi_read_ctl(base);
twsi_ctl &= TWSI_CTL_IFLG;
} while (!twsi_ctl && get_timer(start) < 50);
debug(" return: %u\n", !twsi_ctl);
return !twsi_ctl;
}
/**
* Unsticks the i2c bus
*
* @base base address of registers
*/
static int twsi_start_unstick(void __iomem *base)
{
twsi_stop(base);
twsi_unblock(base);
return 0;
}
/**
* Sends an i2c start condition
*
* @base base address of registers
* Return: 0 for success, otherwise error
*/
static int twsi_start(void __iomem *base)
{
int ret;
u8 stat;
debug("%s(%p)\n", __func__, base);
twsi_write_ctl(base, TWSI_CTL_STA | TWSI_CTL_ENAB);
ret = twsi_wait(base);
if (ret) {
stat = twsi_read_status(base);
debug("%s: ret: 0x%x, status: 0x%x\n", __func__, ret, stat);
switch (stat) {
case TWSI_STAT_START:
case TWSI_STAT_RSTART:
return 0;
case TWSI_STAT_RXADDR_ACK:
default:
return twsi_start_unstick(base);
}
}
debug("%s: success\n", __func__);
return 0;
}
/**
* Sends an i2c stop condition
*
* @base register base address
* Return: 0 for success, -1 if error
*/
static int twsi_stop(void __iomem *base)
{
u8 stat;
twsi_write_ctl(base, TWSI_CTL_STP | TWSI_CTL_ENAB);
stat = twsi_read_status(base);
if (stat != TWSI_STAT_IDLE) {
debug("%s: Bad status on bus@%p\n", __func__, base);
return -1;
}
return 0;
}
/**
* Writes data to the i2c bus
*
* @base register base address
* @slave_addr address of slave to write to
* @buffer Pointer to buffer to write
* @length Number of bytes in buffer to write
* Return: 0 for success, otherwise error
*/
static int twsi_write_data(void __iomem *base, u8 slave_addr,
u8 *buffer, unsigned int length)
{
unsigned int curr = 0;
u64 val;
int ret;
debug("%s(%p, 0x%x, %p, 0x%x)\n", __func__, base, slave_addr,
buffer, length);
ret = twsi_start(base);
if (ret) {
debug("%s: Could not start BUS transaction\n", __func__);
return -1;
}
ret = twsi_wait(base);
if (ret) {
debug("%s: wait failed\n", __func__);
return ret;
}
val = (u32)(slave_addr << 1) | TWSI_OP_WRITE |
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
twsi_write_sw(base, val);
twsi_write_ctl(base, TWSI_CTL_ENAB);
debug("%s: Waiting\n", __func__);
ret = twsi_wait(base);
if (ret) {
debug("%s: Timed out writing slave address 0x%x to target\n",
__func__, slave_addr);
return ret;
}
ret = twsi_read_status(base);
debug("%s: status: 0x%x\n", __func__, ret);
if (ret != TWSI_STAT_TXADDR_ACK) {
debug("%s: status: 0x%x\n", __func__, ret);
twsi_stop(base);
return twsi_i2c_lost_arb(ret, 0);
}
while (curr < length) {
val = buffer[curr++] |
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
twsi_write_sw(base, val);
twsi_write_ctl(base, TWSI_CTL_ENAB);
debug("%s: Writing 0x%llx\n", __func__, val);
ret = twsi_wait(base);
if (ret) {
debug("%s: Timed out writing data to 0x%x\n",
__func__, slave_addr);
return ret;
}
ret = twsi_read_status(base);
debug("%s: status: 0x%x\n", __func__, ret);
}
debug("%s: Stopping\n", __func__);
return twsi_stop(base);
}
/**
* Manually clear the I2C bus and send a stop
*
* @base register base address
*/
static void twsi_unblock(void __iomem *base)
{
int i;
for (i = 0; i < 9; i++) {
writeq(0, base + TWSI_INT);
udelay(5);
writeq(TWSI_INT_SCL_OVR, base + TWSI_INT);
udelay(5);
}
writeq(TWSI_INT_SCL_OVR | TWSI_INT_SDA_OVR, base + TWSI_INT);
udelay(5);
writeq(TWSI_INT_SDA_OVR, base + TWSI_INT);
udelay(5);
writeq(0, base + TWSI_INT);
udelay(5);
}
/**
* Performs a read transaction on the i2c bus
*
* @base Base address of twsi registers
* @slave_addr i2c bus address to read from
* @buffer buffer to read into
* @length number of bytes to read
* Return: 0 for success, otherwise error
*/
static int twsi_read_data(void __iomem *base, u8 slave_addr,
u8 *buffer, unsigned int length)
{
unsigned int curr = 0;
u64 val;
int ret;
debug("%s(%p, 0x%x, %p, %u)\n", __func__, base, slave_addr,
buffer, length);
ret = twsi_start(base);
if (ret) {
debug("%s: start failed\n", __func__);
return ret;
}
ret = twsi_wait(base);
if (ret) {
debug("%s: wait failed\n", __func__);
return ret;
}
val = (u32)(slave_addr << 1) | TWSI_OP_READ |
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
twsi_write_sw(base, val);
twsi_write_ctl(base, TWSI_CTL_ENAB);
ret = twsi_wait(base);
if (ret) {
debug("%s: waiting for sending addr failed\n", __func__);
return ret;
}
ret = twsi_read_status(base);
debug("%s: status: 0x%x\n", __func__, ret);
if (ret != TWSI_STAT_RXADDR_ACK) {
debug("%s: status: 0x%x\n", __func__, ret);
twsi_stop(base);
return twsi_i2c_lost_arb(ret, 0);
}
while (curr < length) {
twsi_write_ctl(base, TWSI_CTL_ENAB |
((curr < length - 1) ? TWSI_CTL_AAK : 0));
ret = twsi_wait(base);
if (ret) {
debug("%s: waiting for data failed\n", __func__);
return ret;
}
val = twsi_read_sw(base, val);
buffer[curr++] = (u8)val;
}
twsi_stop(base);
return 0;
}
/**
* Calculate the divisor values
*
* @speed Speed to set
* @m_div Pointer to M divisor
* @n_div Pointer to N divisor
* Return: 0 for success, otherwise error
*/
static void twsi_calc_div(struct udevice *bus, ulong sclk, unsigned int speed,
int *m_div, int *n_div)
{
struct octeon_twsi *twsi = dev_get_priv(bus);
int thp = twsi->data->thp;
int tclk, fsamp;
int ndiv, mdiv;
if (twsi->data->clk_method == CLK_METHOD_OCTEON) {
tclk = sclk / (2 * (thp + 1));
} else {
/* Refclk src in mode register defaults to 100MHz clock */
sclk = 100000000; /* 100 Mhz */
tclk = sclk / (thp + 2);
}
debug("%s( io_clock %lu tclk %u)\n", __func__, sclk, tclk);
/*
* Compute the clocks M divider:
*
* TWSI freq = (core freq) / (10 x (M+1) x 2 * (thp+1) x 2^N)
* M = ((core freq) / (10 x (TWSI freq) x 2 * (thp+1) x 2^N)) - 1
*
* For OcteonTX2 -
* TWSI freq = (core freq) / (10 x (M+1) x (thp+2) x 2^N)
* M = ((core freq) / (10 x (TWSI freq) x (thp+2) x 2^N)) - 1
*/
for (ndiv = 0; ndiv < 8; ndiv++) {
fsamp = tclk / (1 << ndiv);
mdiv = fsamp / speed / 10;
mdiv -= 1;
if (mdiv < 16)
break;
}
*m_div = mdiv;
*n_div = ndiv;
}
/**
* Init I2C controller
*
* @base Base address of twsi registers
* @slave_addr I2C slave address to configure this controller to
* Return: 0 for success, otherwise error
*/
static int twsi_init(void __iomem *base, int slaveaddr)
{
u64 val;
debug("%s (%p, 0x%x)\n", __func__, base, slaveaddr);
val = slaveaddr << 1 |
FIELD_PREP(TWSI_SW_EOP_IA_MASK, 0) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
TWSI_SW_V;
twsi_write_sw(base, val);
/* Set slave address */
val = slaveaddr |
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_EOP_SLAVE_ADDR) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
TWSI_SW_V;
twsi_write_sw(base, val);
return 0;
}
/**
* Transfers data over the i2c bus
*
* @bus i2c bus to transfer data over
* @msg Array of i2c messages
* @nmsgs Number of messages to send/receive
* Return: 0 for success, otherwise error
*/
static int octeon_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
int nmsgs)
{
struct octeon_twsi *twsi = dev_get_priv(bus);
int ret;
int i;
debug("%s: %d messages\n", __func__, nmsgs);
for (i = 0; i < nmsgs; i++, msg++) {
debug("%s: chip=0x%x, len=0x%x\n", __func__, msg->addr,
msg->len);
if (msg->flags & I2C_M_RD) {
debug("%s: Reading data\n", __func__);
ret = twsi_read_data(twsi->base, msg->addr,
msg->buf, msg->len);
} else {
debug("%s: Writing data\n", __func__);
ret = twsi_write_data(twsi->base, msg->addr,
msg->buf, msg->len);
}
if (ret) {
debug("%s: error sending\n", __func__);
return -EREMOTEIO;
}
}
return 0;
}
/**
* Set I2C bus speed
*
* @bus i2c bus to transfer data over
* @speed Speed in Hz to set
* Return: 0 for success, otherwise error
*/
static int octeon_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
{
struct octeon_twsi *twsi = dev_get_priv(bus);
int m_div, n_div;
ulong clk_rate;
u64 val;
debug("%s(%p, %u)\n", __func__, bus, speed);
clk_rate = clk_get_rate(&twsi->clk);
if (IS_ERR_VALUE(clk_rate))
return -EINVAL;
twsi_calc_div(bus, clk_rate, speed, &m_div, &n_div);
if (m_div >= 16)
return -1;
val = (u32)(((m_div & 0xf) << 3) | ((n_div & 0x7) << 0)) |
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CLKCTL) |
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
TWSI_SW_V;
/* Only init non-slave ports */
writeq(val, twsi->base + TWSI_SW_TWSI);
debug("%s: Wrote 0x%llx to sw_twsi\n", __func__, val);
return 0;
}
static const struct octeon_i2c_data i2c_octeon_data = {
.probe = PROBE_DT,
.reg_offs = 0x0000,
.thp = 3,
.clk_method = CLK_METHOD_OCTEON,
};
static const struct octeon_i2c_data i2c_octeontx_data = {
.probe = PROBE_PCI,
.reg_offs = 0x1000,
.thp = 24,
.clk_method = CLK_METHOD_OCTEON,
};
static const struct octeon_i2c_data i2c_octeontx2_data = {
.probe = PROBE_PCI,
.reg_offs = 0x1000,
.thp = 3,
.clk_method = CLK_METHOD_OCTEONTX2,
};
/**
* Driver probe function
*
* @dev I2C device to probe
* Return: 0 for success, otherwise error
*/
static int octeon_i2c_probe(struct udevice *dev)
{
struct octeon_twsi *twsi = dev_get_priv(dev);
u32 i2c_slave_addr;
int ret;
/* Octeon TX2 needs a different data struct */
if (device_is_compatible(dev, "cavium,thunderx-i2c"))
dev->driver_data = (long)&i2c_octeontx2_data;
twsi->data = (const struct octeon_i2c_data *)dev_get_driver_data(dev);
if (twsi->data->probe == PROBE_PCI) {
pci_dev_t bdf = dm_pci_get_bdf(dev);
debug("TWSI PCI device: %x\n", bdf);
twsi->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
PCI_REGION_MEM);
} else {
twsi->base = dev_remap_addr(dev);
}
twsi->base += twsi->data->reg_offs;
i2c_slave_addr = dev_read_u32_default(dev, "i2c-sda-hold-time-ns",
CONFIG_SYS_I2C_OCTEON_SLAVE_ADDR);
ret = clk_get_by_index(dev, 0, &twsi->clk);
if (ret < 0)
return ret;
ret = clk_enable(&twsi->clk);
if (ret)
return ret;
debug("TWSI bus %d at %p\n", dev_seq(dev), twsi->base);
/* Start with standard speed, real speed set via DT or cmd */
return twsi_init(twsi->base, i2c_slave_addr);
}
static const struct dm_i2c_ops octeon_i2c_ops = {
.xfer = octeon_i2c_xfer,
.set_bus_speed = octeon_i2c_set_bus_speed,
};
static const struct udevice_id octeon_i2c_ids[] = {
{ .compatible = "cavium,octeon-7890-twsi",
.data = (ulong)&i2c_octeon_data },
{ .compatible = "cavium,thunder-8890-twsi",
.data = (ulong)&i2c_octeontx_data },
{ }
};
U_BOOT_DRIVER(octeon_pci_twsi) = {
.name = "i2c_octeon",
.id = UCLASS_I2C,
.of_match = octeon_i2c_ids,
.probe = octeon_i2c_probe,
.priv_auto = sizeof(struct octeon_twsi),
.ops = &octeon_i2c_ops,
};