| /* |
| * (C) Copyright 2003-2006 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2004 |
| * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc5xxx.h> |
| #include <pci.h> |
| |
| #include "mt48lc8m32b2-6-7.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| extern flash_info_t flash_info[]; /* FLASH chips info */ |
| |
| ulong flash_get_size (ulong base, int banknum); |
| |
| #ifndef CFG_RAMBOOT |
| static void sdram_start (int hi_addr) |
| { |
| long hi_addr_bit = hi_addr ? 0x01000000 : 0; |
| |
| /* unlock mode register */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* precharge all banks */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| #if SDRAM_DDR |
| /* set mode register: extended mode */ |
| *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; |
| __asm__ volatile ("sync"); |
| |
| /* set mode register: reset DLL */ |
| *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; |
| __asm__ volatile ("sync"); |
| #endif |
| |
| /* precharge all banks */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* auto refresh */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* set mode register */ |
| *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; |
| __asm__ volatile ("sync"); |
| |
| /* normal operation */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| } |
| #endif |
| |
| /* |
| * ATTENTION: Although partially referenced initdram does NOT make real use |
| * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE |
| * is something else than 0x00000000. |
| */ |
| |
| long int initdram (int board_type) |
| { |
| ulong dramsize = 0; |
| ulong dramsize2 = 0; |
| #ifndef CFG_RAMBOOT |
| ulong test1, test2; |
| |
| /* setup SDRAM chip selects */ |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */ |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */ |
| __asm__ volatile ("sync"); |
| |
| /* setup config registers */ |
| *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; |
| *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; |
| __asm__ volatile ("sync"); |
| |
| #if SDRAM_DDR |
| /* set tap delay */ |
| *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; |
| __asm__ volatile ("sync"); |
| #endif |
| |
| /* find RAM size using SDRAM CS0 only */ |
| sdram_start(0); |
| test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); |
| sdram_start(1); |
| test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); |
| if (test1 > test2) { |
| sdram_start(0); |
| dramsize = test1; |
| } else { |
| dramsize = test2; |
| } |
| |
| /* memory smaller than 1MB is impossible */ |
| if (dramsize < (1 << 20)) { |
| dramsize = 0; |
| } |
| |
| /* set SDRAM CS0 size according to the amount of RAM found */ |
| if (dramsize > 0) { |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; |
| } else { |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ |
| } |
| |
| /* let SDRAM CS1 start right after CS0 */ |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ |
| |
| /* find RAM size using SDRAM CS1 only */ |
| if (!dramsize) |
| sdram_start(0); |
| test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000); |
| if (!dramsize) { |
| sdram_start(1); |
| test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000); |
| } |
| if (test1 > test2) { |
| sdram_start(0); |
| dramsize2 = test1; |
| } else { |
| dramsize2 = test2; |
| } |
| |
| /* memory smaller than 1MB is impossible */ |
| if (dramsize2 < (1 << 20)) { |
| dramsize2 = 0; |
| } |
| |
| /* set SDRAM CS1 size according to the amount of RAM found */ |
| if (dramsize2 > 0) { |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize |
| | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); |
| } else { |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ |
| } |
| |
| #else /* CFG_RAMBOOT */ |
| |
| /* retrieve size of memory connected to SDRAM CS0 */ |
| dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; |
| if (dramsize >= 0x13) { |
| dramsize = (1 << (dramsize - 0x13)) << 20; |
| } else { |
| dramsize = 0; |
| } |
| |
| /* retrieve size of memory connected to SDRAM CS1 */ |
| dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; |
| if (dramsize2 >= 0x13) { |
| dramsize2 = (1 << (dramsize2 - 0x13)) << 20; |
| } else { |
| dramsize2 = 0; |
| } |
| |
| #endif /* CFG_RAMBOOT */ |
| |
| return dramsize + dramsize2; |
| } |
| |
| int checkboard (void) |
| { |
| puts ("Board: MCC200\n"); |
| return 0; |
| } |
| |
| int misc_init_r (void) |
| { |
| /* |
| * Adjust flash start and offset to detected values |
| */ |
| gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; |
| gd->bd->bi_flashoffset = 0; |
| |
| /* |
| * Check if boot FLASH isn't max size |
| */ |
| if (gd->bd->bi_flashsize < (0 - CFG_FLASH_BASE)) { |
| /* adjust mapping */ |
| *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START = |
| START_REG(gd->bd->bi_flashstart); |
| *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = |
| STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize); |
| |
| /* |
| * Re-check to get correct base address |
| */ |
| flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1); |
| |
| /* |
| * Re-do flash protection upon new addresses |
| */ |
| flash_protect (FLAG_PROTECT_CLEAR, |
| gd->bd->bi_flashstart, 0xffffffff, |
| &flash_info[CFG_MAX_FLASH_BANKS - 1]); |
| |
| /* Monitor protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1, |
| &flash_info[CFG_MAX_FLASH_BANKS - 1]); |
| |
| /* Environment protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CFG_ENV_ADDR, |
| CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, |
| &flash_info[CFG_MAX_FLASH_BANKS - 1]); |
| |
| /* Redundant environment protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CFG_ENV_ADDR_REDUND, |
| CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1, |
| &flash_info[CFG_MAX_FLASH_BANKS - 1]); |
| } |
| |
| if (gd->bd->bi_flashsize > (32 << 20)) { |
| /* Unprotect the upper bank of the Flash */ |
| *(volatile int*)MPC5XXX_CS0_CFG |= (1 << 6); |
| flash_protect (FLAG_PROTECT_CLEAR, |
| flash_info[0].start[0], |
| (flash_info[0].start[0] + flash_info[0].size) / 2 - 1, |
| &flash_info[0]); |
| *(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6); |
| } |
| |
| return (0); |
| } |
| |
| #ifdef CONFIG_PCI |
| static struct pci_controller hose; |
| |
| extern void pci_mpc5xxx_init(struct pci_controller *); |
| |
| void pci_init_board(void) |
| { |
| pci_mpc5xxx_init(&hose); |
| } |
| #endif |
| |
| #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) |
| |
| void init_ide_reset (void) |
| { |
| debug ("init_ide_reset\n"); |
| |
| } |
| |
| void ide_set_reset (int idereset) |
| { |
| debug ("ide_reset(%d)\n", idereset); |
| |
| } |
| #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_DOC) |
| extern void doc_probe (ulong physadr); |
| void doc_init (void) |
| { |
| doc_probe (CFG_DOC_BASE); |
| } |
| #endif |