| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018-2022 Marvell International Ltd. |
| */ |
| |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <env.h> |
| #include <net.h> |
| #include <netdev.h> |
| #include <malloc.h> |
| #include <miiphy.h> |
| #include <misc.h> |
| #include <asm/io.h> |
| #include <linux/delay.h> |
| |
| #include <mach/cvmx-regs.h> |
| #include <mach/cvmx-csr.h> |
| #include <mach/cvmx-bootmem.h> |
| #include <mach/octeon-model.h> |
| #include <mach/cvmx-fuse.h> |
| #include <mach/octeon-feature.h> |
| #include <mach/octeon_fdt.h> |
| #include <mach/cvmx-qlm.h> |
| #include <mach/octeon_eth.h> |
| #include <mach/octeon_qlm.h> |
| #include <mach/cvmx-pcie.h> |
| #include <mach/cvmx-coremask.h> |
| |
| #include <mach/cvmx-agl-defs.h> |
| #include <mach/cvmx-asxx-defs.h> |
| #include <mach/cvmx-bgxx-defs.h> |
| #include <mach/cvmx-dbg-defs.h> |
| #include <mach/cvmx-gmxx-defs.h> |
| #include <mach/cvmx-gserx-defs.h> |
| #include <mach/cvmx-ipd-defs.h> |
| #include <mach/cvmx-l2c-defs.h> |
| #include <mach/cvmx-npi-defs.h> |
| #include <mach/cvmx-pcsx-defs.h> |
| #include <mach/cvmx-pexp-defs.h> |
| #include <mach/cvmx-pki-defs.h> |
| #include <mach/cvmx-pko-defs.h> |
| #include <mach/cvmx-smix-defs.h> |
| #include <mach/cvmx-sriox-defs.h> |
| #include <mach/cvmx-xcv-defs.h> |
| #include <mach/cvmx-pcsxx-defs.h> |
| |
| #include <mach/cvmx-helper.h> |
| #include <mach/cvmx-helper-board.h> |
| #include <mach/cvmx-helper-fdt.h> |
| #include <mach/cvmx-helper-bgx.h> |
| #include <mach/cvmx-helper-cfg.h> |
| |
| #include <mach/cvmx-hwpko.h> |
| #include <mach/cvmx-pko.h> |
| #include <mach/cvmx-pki.h> |
| #include <mach/cvmx-config.h> |
| #include <mach/cvmx-mdio.h> |
| |
| /** Maximum receive packet size (hardware default is 1536) */ |
| #define CFG_OCTEON_NETWORK_MRU 1536 |
| |
| #define OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX "__tmp" |
| |
| /** |
| * Enables RX packet debugging if octeon_debug_rx_packets is set in the |
| * environment. |
| */ |
| #define DEBUG_RX_PACKET |
| |
| /** |
| * Enables TX packet debugging if octeon_debug_tx_packets is set in the |
| * environment. |
| */ |
| #define DEBUG_TX_PACKET |
| |
| /* Global flag indicating common hw has been set up */ |
| static int octeon_global_hw_inited; |
| |
| #if defined(DEBUG_RX_PACKET) || defined(DEBUG_TX_PACKET) |
| static int packet_rx_debug; |
| static int packet_tx_debug; |
| #endif |
| |
| /* Make sure that we have enough buffers to keep prefetching blocks happy. |
| * Absolute minimum is probably about 200. |
| */ |
| #define NUM_PACKET_BUFFERS 1000 |
| |
| #define PKO_SHUTDOWN_TIMEOUT_VAL 100 |
| |
| /* Define the offsets from the base CSR */ |
| #define GMX_PRT_CFG 0x10 |
| |
| #define GMX_RX_FRM_MAX 0x30 |
| #define GMX_RX_JABBER 0x38 |
| |
| #define GMX_RX_ADR_CTL 0x100 |
| #define GMX_RX_ADR_CAM_EN 0x108 |
| #define GMX_RX_ADR_CAM0 0x180 |
| #define GMX_RX_ADR_CAM1 0x188 |
| #define GMX_RX_ADR_CAM2 0x190 |
| #define GMX_RX_ADR_CAM3 0x198 |
| #define GMX_RX_ADR_CAM4 0x1a0 |
| #define GMX_RX_ADR_CAM5 0x1a8 |
| #define GMX_TX_OVR_BP 0x4c8 |
| |
| /** |
| * Set the hardware MAC address for a device |
| * |
| * @param interface interface of port to set |
| * @param index index of port to set MAC address for |
| * @param addr Address structure to change it too. |
| * @return Zero on success |
| */ |
| static int cvm_oct_set_mac_address(struct udevice *dev) |
| { |
| struct octeon_eth_info *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| cvmx_gmxx_prtx_cfg_t gmx_cfg; |
| cvmx_helper_interface_mode_t mode; |
| cvmx_gmxx_rxx_adr_ctl_t control; |
| u8 *ptr = (uint8_t *)pdata->enetaddr; |
| int interface = priv->interface; |
| int index = priv->index; |
| u64 mac = 0; |
| u64 gmx_reg; |
| int xipd_port; |
| int i; |
| |
| for (i = 0; i < 6; i++) |
| mac = (mac << 8) | (u64)(ptr[i]); |
| |
| debug("%s(%s (%pM))\n", __func__, dev->name, ptr); |
| mode = cvmx_helper_interface_get_mode(interface); |
| |
| /* It's rather expensive to change the MAC address for BGX so we only |
| * do this if it has changed or not been set previously. |
| */ |
| if (octeon_has_feature(OCTEON_FEATURE_BGX)) { |
| xipd_port = cvmx_helper_get_ipd_port(interface, index); |
| if (priv->last_bgx_mac != mac || !priv->bgx_mac_set) { |
| cvmx_helper_bgx_set_mac(xipd_port, 1, 2, mac); |
| priv->last_bgx_mac = mac; |
| priv->bgx_mac_set = 1; |
| } |
| return 0; |
| } |
| |
| if (mode == CVMX_HELPER_INTERFACE_MODE_AGL) { |
| gmx_reg = CVMX_AGL_GMX_RXX_INT_REG(0); |
| } else { |
| gmx_reg = CVMX_GMXX_RXX_INT_REG(index, interface); |
| csr_wr(CVMX_GMXX_SMACX(index, interface), mac); |
| } |
| |
| /* Disable interface */ |
| gmx_cfg.u64 = csr_rd(gmx_reg + GMX_PRT_CFG); |
| csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64 & ~1ull); |
| debug("%s: gmx reg: 0x%llx\n", __func__, gmx_reg); |
| |
| csr_wr(gmx_reg + GMX_RX_ADR_CAM0, ptr[0]); |
| csr_wr(gmx_reg + GMX_RX_ADR_CAM1, ptr[1]); |
| csr_wr(gmx_reg + GMX_RX_ADR_CAM2, ptr[2]); |
| csr_wr(gmx_reg + GMX_RX_ADR_CAM3, ptr[3]); |
| csr_wr(gmx_reg + GMX_RX_ADR_CAM4, ptr[4]); |
| csr_wr(gmx_reg + GMX_RX_ADR_CAM5, ptr[5]); |
| |
| control.u64 = 0; |
| control.s.bcst = 1; /* Allow broadcast MAC addresses */ |
| control.s.mcst = 1; /* Force reject multicast packets */ |
| control.s.cam_mode = 1; /* Filter packets based on the CAM */ |
| |
| csr_wr(gmx_reg + GMX_RX_ADR_CTL, control.u64); |
| |
| csr_wr(gmx_reg + GMX_RX_ADR_CAM_EN, 1); |
| |
| /* Return interface to previous enable state */ |
| csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64); |
| |
| return 0; |
| } |
| |
| static void cvm_oct_fill_hw_memory(u64 pool, u64 size, u64 elements) |
| { |
| static int alloc_count; |
| char tmp_name[64]; |
| int ret; |
| |
| debug("%s: pool: 0x%llx, size: 0xx%llx, count: 0x%llx\n", |
| __func__, pool, size, elements); |
| sprintf(tmp_name, "%s_fpa_alloc_%d", |
| OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX, alloc_count++); |
| ret = cvmx_fpa_setup_pool(pool, tmp_name, NULL, size, elements); |
| } |
| |
| /** |
| * Configure common hardware for all interfaces |
| */ |
| static void cvm_oct_configure_common_hw(void) |
| { |
| int mru = env_get_ulong("octeon_mru", 0, CFG_OCTEON_NETWORK_MRU); |
| int packet_pool_size = CVMX_FPA_PACKET_POOL_SIZE; |
| |
| if (mru > packet_pool_size) |
| packet_pool_size = (mru + CVMX_CACHE_LINE_SIZE - 1) & |
| ~(CVMX_CACHE_LINE_SIZE - 1); |
| |
| /* Setup the FPA */ |
| cvmx_fpa_enable(); |
| |
| cvm_oct_fill_hw_memory(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE, |
| NUM_PACKET_BUFFERS); |
| #if CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL |
| if (!octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) { |
| cvm_oct_fill_hw_memory(CVMX_FPA_OUTPUT_BUFFER_POOL, |
| CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128); |
| } |
| #endif |
| cvm_oct_fill_hw_memory(CVMX_FPA_PACKET_POOL, packet_pool_size, |
| NUM_PACKET_BUFFERS); |
| |
| cvmx_helper_initialize_packet_io_global(); |
| cvmx_helper_initialize_packet_io_local(); |
| |
| /* The MRU defaults to 1536 bytes by the hardware. Setting |
| * CFG_OCTEON_NETWORK_MRU allows this to be overridden. |
| */ |
| if (octeon_has_feature(OCTEON_FEATURE_PKI)) { |
| struct cvmx_pki_global_config gbl_cfg; |
| int i; |
| |
| cvmx_pki_read_global_config(0, &gbl_cfg); |
| for (i = 0; i < CVMX_PKI_NUM_FRAME_CHECK; i++) |
| gbl_cfg.frm_len[i].maxlen = mru; |
| cvmx_pki_write_global_config(0, &gbl_cfg); |
| } |
| |
| /* Set POW get work timeout to maximum value */ |
| if (octeon_has_feature(OCTEON_FEATURE_CN68XX_WQE) || |
| octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) |
| csr_wr(CVMX_SSO_NW_TIM, 0x3ff); |
| else |
| csr_wr(CVMX_POW_NW_TIM, 0x3ff); |
| } |
| |
| /** |
| * Enables Ethernet devices to allow packets to be transmitted and received. |
| * For example, this is activated when the DHCP command is issued. |
| * |
| * @param dev Ethernet device to initialize |
| * @param bis board data structure, not used. |
| * |
| * @return 1 for success |
| */ |
| int octeon_eth_init(struct udevice *dev) |
| { |
| struct octeon_eth_info *priv = dev_get_priv(dev); |
| |
| debug("%s(), dev_ptr: %p, dev: %s, port: %d\n", __func__, dev, |
| dev->name, priv->port); |
| |
| if (priv->initted_flag) { |
| debug("%s already initialized\n", dev->name); |
| return 1; |
| } |
| |
| if (!octeon_global_hw_inited) { |
| debug("Initializing common hardware\n"); |
| cvm_oct_configure_common_hw(); |
| } |
| |
| /* Ignore backpressure on RGMII ports */ |
| if (!octeon_has_feature(OCTEON_FEATURE_BGX)) |
| csr_wr(priv->gmx_base + GMX_TX_OVR_BP, 0xf << 8 | 0xf); |
| |
| debug("%s: Setting MAC address\n", __func__); |
| cvm_oct_set_mac_address(dev); |
| |
| if (!octeon_global_hw_inited) { |
| debug("Enabling packet input\n"); |
| cvmx_helper_ipd_and_packet_input_enable(); |
| octeon_global_hw_inited = 1; |
| |
| /* Connect, configure and start the PHY, if the device is |
| * connected to one. If not, then it's most likely an SPF |
| * enabled port, which does not have such PHY setup here. |
| */ |
| if (priv->mdio_dev) { |
| priv->phy_dev = dm_eth_phy_connect(dev); |
| phy_config(priv->phy_dev); |
| phy_startup(priv->phy_dev); |
| } |
| } |
| priv->enabled = 0; |
| priv->initted_flag = 1; |
| |
| debug("%s exiting successfully\n", __func__); |
| return 1; |
| } |
| |
| /** |
| * Initializes the specified interface and port |
| * |
| * @param interface interface to initialize |
| * @param index port index on interface |
| * @param port ipd port number |
| * @param if_mode interface mode |
| * |
| * @return 0 for success, -1 if out of memory, 1 if port is invalid |
| */ |
| static int octeon_eth_initialize(struct udevice *dev, int interface, |
| int index, int port, |
| cvmx_helper_interface_mode_t if_mode) |
| { |
| struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| int eth; |
| |
| eth = cvmx_helper_get_port_fdt_node_offset(interface, index); |
| if (eth <= 0) { |
| debug("ERROR: No fdt node for interface %d, index %d\n", |
| interface, index); |
| return 1; |
| } |
| |
| oct_eth_info->is_c45 = (if_mode == CVMX_HELPER_INTERFACE_MODE_XAUI) || |
| (if_mode == CVMX_HELPER_INTERFACE_MODE_RXAUI) || |
| (if_mode == CVMX_HELPER_INTERFACE_MODE_XFI) || |
| (if_mode == CVMX_HELPER_INTERFACE_MODE_XLAUI) || |
| (if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR) || |
| (if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR); |
| oct_eth_info->port = port; |
| oct_eth_info->index = index; |
| oct_eth_info->interface = interface; |
| oct_eth_info->initted_flag = 0; |
| /* This is guaranteed to force the link state to be printed out */ |
| oct_eth_info->link_state = 0xffffffffffffffffULL; |
| debug("Setting up port: %d, int: %d, index: %d, device: octeth%d\n", |
| oct_eth_info->port, oct_eth_info->interface, oct_eth_info->index, |
| dev_seq(dev)); |
| if (if_mode == CVMX_HELPER_INTERFACE_MODE_AGL) { |
| oct_eth_info->gmx_base = CVMX_AGL_GMX_RXX_INT_REG(0); |
| } else { |
| if (!octeon_has_feature(OCTEON_FEATURE_BGX)) |
| oct_eth_info->gmx_base = |
| CVMX_GMXX_RXX_INT_REG(index, interface); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @INTERNAL |
| * Converts a BGX address to the node, interface and port number |
| * |
| * @param bgx_addr Address of CSR register |
| * |
| * @return node, interface and port number, will be -1 for invalid address. |
| */ |
| static struct cvmx_xiface __cvmx_bgx_reg_addr_to_xiface(u64 bgx_addr) |
| { |
| struct cvmx_xiface xi = { -1, -1 }; |
| |
| xi.node = cvmx_csr_addr_to_node(bgx_addr); |
| bgx_addr = cvmx_csr_addr_strip_node(bgx_addr); |
| if ((bgx_addr & 0xFFFFFFFFF0000000) != 0x00011800E0000000) { |
| debug("%s: Invalid BGX address 0x%llx\n", __func__, |
| (unsigned long long)bgx_addr); |
| xi.node = -1; |
| return xi; |
| } |
| xi.interface = (bgx_addr >> 24) & 0x0F; |
| |
| return xi; |
| } |
| |
| static int octeon_nic_probe(struct udevice *dev) |
| { |
| struct octeon_eth_info *info = dev_get_priv(dev); |
| struct ofnode_phandle_args phandle; |
| struct cvmx_xiface xi; |
| ofnode node, mdio_node; |
| int ipd_port; |
| int intf; |
| int ret; |
| |
| /* The empty stub is to keep cvmx_user_app_init() happy. */ |
| cvmx_npi_max_pknds = 1; |
| __cvmx_helper_init_port_valid(); |
| |
| xi = __cvmx_bgx_reg_addr_to_xiface(dev_read_addr(dev)); |
| intf = xi.interface; |
| debug("%s: Found BGX node %d, interface %d\n", __func__, xi.node, intf); |
| |
| ipd_port = cvmx_helper_get_ipd_port(intf, xi.node); |
| ret = octeon_eth_initialize(dev, intf, xi.node, ipd_port, |
| cvmx_helper_interface_get_mode(intf)); |
| |
| /* Move to subnode, as this includes the "phy-handle" */ |
| node = dev_read_first_subnode(dev); |
| |
| /* Check if an SPF module is conneted, then no MDIO is probed */ |
| ret = ofnode_parse_phandle_with_args(node, "sfp-slot", NULL, 0, 0, |
| &phandle); |
| if (!ret) { |
| dev_dbg(dev, "sfp-slot found, not probing for MDIO\n"); |
| return 0; |
| } |
| |
| /* Continue with MDIO probing */ |
| ret = ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0, |
| &phandle); |
| if (ret) { |
| dev_err(dev, "phy-handle not found in subnode\n"); |
| return -ENODEV; |
| } |
| |
| /* Get MDIO node */ |
| mdio_node = ofnode_get_parent(phandle.node); |
| ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio_node, |
| &info->mdio_dev); |
| if (ret) { |
| dev_err(dev, "mdio_dev not found\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Sets the hardware MAC address of the Ethernet device |
| * |
| * @param dev - Ethernet device |
| * |
| * @return 0 for success |
| */ |
| int octeon_eth_write_hwaddr(struct udevice *dev) |
| { |
| struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| |
| /* Skip if the interface isn't yet enabled */ |
| if (!oct_eth_info->enabled) { |
| debug("%s: Interface not enabled, not setting MAC address\n", |
| __func__); |
| return 0; |
| } |
| debug("%s: Setting %s address to %02x:%02x:%02x:%02x:%02x:%02x\n", |
| __func__, dev->name, pdata->enetaddr[0], pdata->enetaddr[1], |
| pdata->enetaddr[2], pdata->enetaddr[3], pdata->enetaddr[4], |
| pdata->enetaddr[5]); |
| return cvm_oct_set_mac_address(dev); |
| } |
| |
| /** |
| * Enables and disables the XCV RGMII interface |
| * |
| * @param interface Interface number |
| * @param index Port index (should be 0 for RGMII) |
| * @param enable True to enable it, false to disable it |
| */ |
| static void octeon_bgx_xcv_rgmii_enable(int interface, int index, bool enable) |
| { |
| union cvmx_xcv_reset xcv_reset; |
| |
| debug("%s(%d, %d, %sable)\n", __func__, interface, index, |
| enable ? "en" : "dis"); |
| xcv_reset.u64 = csr_rd(CVMX_XCV_RESET); |
| xcv_reset.s.rx_pkt_rst_n = enable ? 1 : 0; |
| csr_wr(CVMX_XCV_RESET, xcv_reset.u64); |
| } |
| |
| /** |
| * Enables a SGMII interface |
| * |
| * @param dev - Ethernet device to initialize |
| */ |
| void octeon_eth_sgmii_enable(struct udevice *dev) |
| { |
| struct octeon_eth_info *oct_eth_info; |
| cvmx_gmxx_prtx_cfg_t gmx_cfg; |
| int index, interface; |
| cvmx_helper_interface_mode_t if_mode; |
| |
| oct_eth_info = dev_get_priv(dev); |
| interface = oct_eth_info->interface; |
| index = oct_eth_info->index; |
| |
| debug("%s(%s) (%d.%d)\n", __func__, dev->name, interface, index); |
| if (octeon_has_feature(OCTEON_FEATURE_BGX)) { |
| cvmx_bgxx_cmrx_config_t cmr_config; |
| |
| cmr_config.u64 = |
| csr_rd(CVMX_BGXX_CMRX_CONFIG(index, interface)); |
| cmr_config.s.enable = 1; |
| cmr_config.s.data_pkt_tx_en = 1; |
| cmr_config.s.data_pkt_rx_en = 1; |
| csr_wr(CVMX_BGXX_CMRX_CONFIG(index, interface), cmr_config.u64); |
| mdelay(100); |
| if (cvmx_helper_bgx_is_rgmii(interface, index)) |
| octeon_bgx_xcv_rgmii_enable(interface, index, true); |
| } else { |
| if_mode = cvmx_helper_interface_get_mode(interface); |
| /* Normal operating mode. */ |
| |
| if (if_mode == CVMX_HELPER_INTERFACE_MODE_SGMII || |
| if_mode == CVMX_HELPER_INTERFACE_MODE_QSGMII) { |
| cvmx_pcsx_miscx_ctl_reg_t pcsx_miscx_ctl_reg; |
| |
| debug(" if mode: (Q)SGMII\n"); |
| pcsx_miscx_ctl_reg.u64 = csr_rd(CVMX_PCSX_MISCX_CTL_REG(index, interface)); |
| pcsx_miscx_ctl_reg.s.gmxeno = 0; |
| csr_wr(CVMX_PCSX_MISCX_CTL_REG(index, interface), |
| pcsx_miscx_ctl_reg.u64); |
| } else if (if_mode != CVMX_HELPER_INTERFACE_MODE_AGL) { |
| cvmx_pcsxx_misc_ctl_reg_t pcsxx_misc_ctl_reg; |
| |
| debug(" if mode: AGM\n"); |
| pcsxx_misc_ctl_reg.u64 = |
| csr_rd(CVMX_PCSXX_MISC_CTL_REG(interface)); |
| pcsxx_misc_ctl_reg.s.gmxeno = 0; |
| csr_wr(CVMX_PCSXX_MISC_CTL_REG(interface), |
| pcsxx_misc_ctl_reg.u64); |
| } |
| |
| gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG); |
| gmx_cfg.s.en = 1; |
| csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64); |
| gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG); |
| } |
| } |
| |
| /** |
| * Enables an Ethernet interface |
| * |
| * @param dev - Ethernet device to enable |
| */ |
| void octeon_eth_enable(struct udevice *dev) |
| { |
| struct octeon_eth_info *oct_eth_info; |
| u64 tmp; |
| int interface; |
| cvmx_helper_interface_mode_t if_mode; |
| |
| oct_eth_info = dev_get_priv(dev); |
| interface = oct_eth_info->interface; |
| if_mode = cvmx_helper_interface_get_mode(interface); |
| |
| switch (if_mode) { |
| case CVMX_HELPER_INTERFACE_MODE_RGMII: |
| case CVMX_HELPER_INTERFACE_MODE_GMII: |
| debug(" rgmii/gmii mode\n"); |
| tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(interface)); |
| tmp |= (1ull << (oct_eth_info->port & 0x3)); |
| csr_wr(CVMX_ASXX_RX_PRT_EN(interface), tmp); |
| tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(interface)); |
| tmp |= (1ull << (oct_eth_info->port & 0x3)); |
| csr_wr(CVMX_ASXX_TX_PRT_EN(interface), tmp); |
| octeon_eth_write_hwaddr(dev); |
| break; |
| |
| case CVMX_HELPER_INTERFACE_MODE_SGMII: |
| case CVMX_HELPER_INTERFACE_MODE_XAUI: |
| case CVMX_HELPER_INTERFACE_MODE_RXAUI: |
| case CVMX_HELPER_INTERFACE_MODE_XLAUI: |
| case CVMX_HELPER_INTERFACE_MODE_XFI: |
| case CVMX_HELPER_INTERFACE_MODE_10G_KR: |
| case CVMX_HELPER_INTERFACE_MODE_40G_KR4: |
| case CVMX_HELPER_INTERFACE_MODE_MIXED: |
| case CVMX_HELPER_INTERFACE_MODE_AGL: |
| debug(" SGMII/XAUI/etc.\n"); |
| octeon_eth_sgmii_enable(dev); |
| octeon_eth_write_hwaddr(dev); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| void octeon_phy_port_check(struct udevice *dev) |
| { |
| struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| struct phy_device *phydev = oct_eth_info->phydev; |
| |
| if (oct_eth_info->phy_port_check) |
| oct_eth_info->phy_port_check(phydev); |
| } |
| |
| /** |
| * Configure the RGMII port for the negotiated speed |
| * |
| * @param dev Linux device for the RGMII port |
| */ |
| static void cvm_oct_configure_rgmii_speed(struct udevice *dev) |
| { |
| struct octeon_eth_info *priv = dev_get_priv(dev); |
| int port = priv->port; |
| cvmx_helper_link_info_t link_state = cvmx_helper_link_get(port); |
| |
| /* If the port is down some PHYs we need to check modules, etc. */ |
| if (!link_state.s.link_up) |
| octeon_phy_port_check(dev); |
| |
| if (link_state.u64 != priv->link_state) { |
| cvmx_helper_interface_mode_t mode; |
| |
| octeon_phy_port_check(dev); |
| |
| debug("%s(%s): Link state changed\n", __func__, dev->name); |
| printf("%s: ", dev->name); |
| if (!link_state.s.link_up) { |
| puts("Down "); |
| } else { |
| printf("Up %d Mbps ", link_state.s.speed); |
| if (link_state.s.full_duplex) |
| puts("Full duplex "); |
| else |
| puts("Half duplex "); |
| } |
| mode = cvmx_helper_interface_get_mode(priv->interface); |
| printf("(port %2d) (%s)\n", port, |
| cvmx_helper_interface_mode_to_string(mode)); |
| debug("%s: Setting link state\n", __func__); |
| cvmx_helper_link_set(priv->port, link_state); |
| priv->link_state = link_state.u64; |
| } |
| } |
| |
| #if defined(DEBUG_TX_PACKET) || defined(DEBUG_RX_PACKET) |
| static void print_mac(const char *label, const uint8_t *mac_addr) |
| { |
| printf("%s: %02x:%02x:%02x:%02x:%02x:%02x", label, mac_addr[0], |
| mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]); |
| } |
| |
| static void print_ip(const void *packet) |
| { |
| u8 *p = (uint8_t *)packet; |
| u16 length; |
| u8 hdr_len; |
| |
| puts("IP Header:\n"); |
| if ((p[0] & 0xF0) != 0x40) { |
| printf("Invalid IP version %d\n", *p >> 4); |
| return; |
| } |
| hdr_len = *p & 0x0F; |
| if (hdr_len < 5) |
| printf("Invalid IP header length %d\n", hdr_len); |
| printf(" Version: 4, Header length: %d\n", hdr_len); |
| length = (p[2] << 8) | p[3]; |
| printf(" TOS: 0x%02x, length: %d\n", p[1], length); |
| printf(" ID: %d, %s%s%s fragment offset: %d\n", (p[4] << 8) | p[5], |
| p[6] & 0x80 ? "congested, " : "", p[6] & 0x40 ? "DF, " : "", |
| p[6] & 0x20 ? "MF, " : "", ((p[6] & 0x1F) << 8) | p[7]); |
| printf(" TTL: %d, Protocol: %d, Header Checksum: 0x%x\n", p[8], p[9], |
| (p[10] << 8) | p[11]); |
| printf(" Source IP: %d.%d.%d.%d\n Destination IP: %d.%d.%d.%d\n", |
| p[12], p[13], p[14], p[15], p[16], p[17], p[18], p[19]); |
| if (p[9] == 17 || p[9] == 6) |
| printf(" Source port: %u, Destination port: %u\n", |
| (p[20] << 8) | p[21], (p[22] << 8) | p[23]); |
| puts("\n"); |
| } |
| |
| /** |
| * Prints out a packet for debugging purposes |
| * |
| * @param[in] packet - pointer to packet data |
| * @param length - length of packet in bytes |
| */ |
| static void print_packet(const void *packet, int length) |
| { |
| int i, j; |
| const unsigned char *up = packet; |
| u16 type = (up[12] << 8 | up[13]); |
| int start = 14; |
| |
| print_mac("DMAC", &up[0]); |
| puts(" "); |
| print_mac("SMAC", &up[6]); |
| printf(" TYPE: %04x\n", type); |
| |
| if (type == 0x0800) |
| print_ip(&up[start]); |
| |
| for (i = start; (i + 16) < length; i += 16) { |
| printf("%04x ", i); |
| for (j = 0; j < 16; ++j) |
| printf("%02x ", up[i + j]); |
| |
| printf(" "); |
| for (j = 0; j < 16; ++j) |
| printf("%c", |
| ((up[i + j] >= ' ') && (up[i + j] <= '~')) ? |
| up[i + j] : |
| '.'); |
| printf("\n"); |
| } |
| printf("%04x ", i); |
| for (j = 0; i + j < length; ++j) |
| printf("%02x ", up[i + j]); |
| |
| for (; j < 16; ++j) |
| printf(" "); |
| |
| printf(" "); |
| for (j = 0; i + j < length; ++j) |
| printf("%c", ((up[i + j] >= ' ') && (up[i + j] <= '~')) ? |
| up[i + j] : |
| '.'); |
| |
| printf("\n"); |
| } |
| #endif |
| |
| /** |
| * String representation of error codes. |
| */ |
| static const char * const rx_error_codes[] = { |
| "OK", |
| "partial", |
| "jabber", |
| "overrun", |
| "oversize", |
| "alignment", |
| "fragment", |
| "fcs", |
| "undersize", |
| "extend", |
| "length mismatch", |
| "rgmii rx", |
| "skip error", |
| "nibble error (studder)", |
| "(undefined)", |
| "(undefined)", |
| "SPI 4.2 FCS", |
| "skip", |
| "L2 malformed", |
| }; |
| |
| /** |
| * Called to receive a packet |
| * |
| * @param dev - device to receive on |
| * |
| * @return - length of packet |
| * |
| * This function is used to poll packets. In turn it calls NetReceive |
| * to process the packets. |
| */ |
| static int nic_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| cvmx_wqe_t *work = cvmx_pow_work_request_sync(CVMX_POW_WAIT); |
| struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| cvmx_buf_ptr_t buf_ptr; |
| void *packet_data; |
| int length; |
| int error_code; |
| |
| if (!oct_eth_info->enabled) { |
| oct_eth_info->enabled = 1; |
| debug("%s: Enabling interface %s\n", __func__, dev->name); |
| octeon_eth_enable(dev); |
| } |
| |
| if (!work) { |
| /* |
| * Somtimes the link is not up yet. Return here in this |
| * case, this function will be called again later. |
| */ |
| return 0; |
| } |
| |
| error_code = cvmx_wqe_get_rcv_err(work); |
| if (error_code) { |
| /* Work has error, so drop */ |
| cvmx_helper_free_packet_data(work); |
| cvmx_wqe_free(work); |
| if (error_code < ARRAY_SIZE(rx_error_codes) && |
| !octeon_has_feature(OCTEON_FEATURE_BGX)) |
| printf("Receive error (code %d: %s), dropping\n", |
| error_code, rx_error_codes[error_code]); |
| else |
| printf("Receive error (code %d (unknown), dropping\n", |
| error_code); |
| return 0; |
| } |
| if (cvmx_wqe_get_bufs(work) != 1) { |
| /* can only support single-buffer packets */ |
| printf("Abnormal packet received in %u bufs, dropping\n", |
| cvmx_wqe_get_bufs(work)); |
| length = cvmx_wqe_get_len(work); |
| buf_ptr = cvmx_wqe_get_packet_ptr(work); |
| packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr); |
| print_packet(packet_data, length); |
| cvmx_helper_free_packet_data(work); |
| cvmx_wqe_free(work); |
| return 0; |
| } |
| |
| buf_ptr = cvmx_wqe_get_packet_ptr(work); |
| packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr); |
| length = cvmx_wqe_get_len(work); |
| |
| oct_eth_info->packets_received++; |
| debug("############# got work: %p, len: %d, packet_ptr: %p\n", work, |
| length, packet_data); |
| #if defined(DEBUG_RX_PACKET) |
| if (packet_rx_debug) { |
| printf("\nRX packet: interface: %d, index: %d\n", |
| oct_eth_info->interface, oct_eth_info->index); |
| print_packet(packet_data, length); |
| } |
| #endif |
| *packetp = (uchar *)packet_data; |
| |
| /* Save work for free_pkt() */ |
| oct_eth_info->work = work; |
| |
| /* Free WQE and packet data */ |
| return length; |
| } |
| |
| static int nic_free_pkt(struct udevice *dev, uchar *pkt, int pkt_len) |
| { |
| struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| cvmx_wqe_t *work = oct_eth_info->work; |
| |
| if (!work) |
| return 0; |
| |
| cvmx_helper_free_packet_data(work); |
| cvmx_wqe_free(work); |
| oct_eth_info->work = NULL; |
| |
| return 0; |
| } |
| |
| /** |
| * Packet transmit |
| * |
| * @param skb Packet to send |
| * @param dev Device info structure |
| * @return Always returns zero |
| */ |
| static int cvm_oct_xmit(struct udevice *dev, void *packet, int len) |
| { |
| struct octeon_eth_info *priv = dev_get_priv(dev); |
| int queue = cvmx_pko_get_base_queue(priv->port); |
| cvmx_pko_command_word0_t pko_command; |
| cvmx_buf_ptr_t hw_buffer; |
| int rv; |
| |
| debug("%s: addr: %p, len: %d\n", __func__, packet, len); |
| |
| hw_buffer.u64 = 0; |
| hw_buffer.s.addr = cvmx_ptr_to_phys(packet); |
| hw_buffer.s.pool = CVMX_FPA_PACKET_POOL; |
| hw_buffer.s.size = len; |
| hw_buffer.s.back = 0; |
| |
| /* Build the PKO command */ |
| pko_command.u64 = 0; |
| pko_command.s.subone0 = 1; |
| pko_command.s.dontfree = 0; |
| pko_command.s.segs = 1; |
| pko_command.s.total_bytes = len; |
| /* Send the packet to the output queue */ |
| |
| debug("%s: port: %d, queue: %d\n", __func__, priv->port, queue); |
| cvmx_pko_send_packet_prepare(priv->port, queue, 0); |
| rv = cvmx_pko_send_packet_finish(priv->port, queue, pko_command, |
| hw_buffer, 0); |
| if (rv) |
| printf("Failed to send the packet rv=%d\n", rv); |
| |
| return 0; |
| } |
| |
| static int nic_xmit(struct udevice *dev, void *pkt, int pkt_len) |
| { |
| struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| void *fpa_buf = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL); |
| |
| if (!oct_eth_info->enabled) { |
| oct_eth_info->enabled = 1; |
| octeon_eth_enable(dev); |
| } |
| |
| /* We need to copy this to a FPA buffer, then give that to TX */ |
| |
| if (oct_eth_info->packets_sent == 0 && |
| !octeon_has_feature(OCTEON_FEATURE_BGX)) |
| cvm_oct_configure_rgmii_speed(dev); |
| |
| if (!fpa_buf) { |
| printf("ERROR allocating buffer for packet!\n"); |
| return -1; |
| } |
| |
| memcpy(fpa_buf, pkt, pkt_len); |
| #ifdef DEBUG_TX_PACKET |
| if (packet_tx_debug) { |
| printf("\nTX packet: interface: %d, index: %d\n", |
| oct_eth_info->interface, oct_eth_info->index); |
| print_packet(pkt, pkt_len); |
| } |
| #endif |
| cvm_oct_xmit(dev, fpa_buf, pkt_len); |
| oct_eth_info->packets_sent++; |
| |
| return 0; |
| } |
| |
| int nic_open(struct udevice *dev) |
| { |
| octeon_eth_init(dev); |
| |
| return 0; |
| } |
| |
| static void octeon_eth_halt_bgx(struct udevice *dev, |
| cvmx_helper_interface_mode_t mode) |
| { |
| union cvmx_bgxx_cmrx_config cmr_config; |
| union cvmx_bgxx_cmr_rx_adrx_cam cmr_cam; |
| struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| int index = oct_eth_info->index; |
| int xiface = oct_eth_info->interface; |
| struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); |
| |
| debug("%s(%s(%d.%d), %d)\n", __func__, dev->name, xiface, index, mode); |
| |
| /* For RGMII we need to properly shut down the XCV interface */ |
| if (cvmx_helper_bgx_is_rgmii(xiface, index)) { |
| debug(" Shut down XCV RGMII\n"); |
| octeon_bgx_xcv_rgmii_enable(xi.interface, index, false); |
| } else { |
| cmr_config.u64 = csr_rd_node(xi.node, |
| CVMX_BGXX_CMRX_CONFIG(index, xi.interface)); |
| cmr_config.s.data_pkt_tx_en = 0; |
| cmr_config.s.data_pkt_rx_en = 0; |
| csr_wr_node(xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface), |
| cmr_config.u64); |
| |
| cmr_cam.u64 = csr_rd_node(xi.node, |
| CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface)); |
| cmr_cam.s.en = 0; |
| csr_wr_node(xi.node, |
| CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface), |
| cmr_cam.u64); |
| oct_eth_info->last_bgx_mac = 0; |
| oct_eth_info->bgx_mac_set = 0; |
| } |
| } |
| |
| /** |
| * Halts the specified Ethernet interface preventing it from receiving any more |
| * packets. |
| * |
| * @param dev - Ethernet device to shut down. |
| */ |
| void octeon_eth_halt(struct udevice *dev) |
| { |
| struct octeon_eth_info *oct_eth_info = dev_get_priv(dev); |
| int index = oct_eth_info->index; |
| int interface = oct_eth_info->interface; |
| cvmx_helper_interface_mode_t mode; |
| union cvmx_gmxx_rxx_adr_ctl adr_ctl; |
| cvmx_gmxx_prtx_cfg_t gmx_cfg; |
| u64 tmp; |
| |
| debug("%s(%s): Halting\n", __func__, dev->name); |
| |
| oct_eth_info->enabled = 0; |
| |
| mode = cvmx_helper_interface_get_mode(oct_eth_info->interface); |
| if (octeon_has_feature(OCTEON_FEATURE_BGX)) { |
| octeon_eth_halt_bgx(dev, mode); |
| return; |
| } |
| |
| /* Stop SCC */ |
| /* Disable reception on this port at the GMX block */ |
| switch (mode) { |
| case CVMX_HELPER_INTERFACE_MODE_RGMII: |
| case CVMX_HELPER_INTERFACE_MODE_GMII: |
| debug(" RGMII/GMII\n"); |
| tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface)); |
| tmp &= ~(1ull << index); |
| /* Disable the RGMII RX ports */ |
| csr_wr(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface), tmp); |
| tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface)); |
| tmp &= ~(1ull << index); |
| /* Disable the RGMII TX ports */ |
| csr_wr(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface), tmp); |
| /* No break! */ |
| case CVMX_HELPER_INTERFACE_MODE_SGMII: |
| case CVMX_HELPER_INTERFACE_MODE_QSGMII: |
| case CVMX_HELPER_INTERFACE_MODE_XAUI: |
| case CVMX_HELPER_INTERFACE_MODE_RXAUI: |
| case CVMX_HELPER_INTERFACE_MODE_XLAUI: |
| case CVMX_HELPER_INTERFACE_MODE_XFI: |
| case CVMX_HELPER_INTERFACE_MODE_10G_KR: |
| case CVMX_HELPER_INTERFACE_MODE_40G_KR4: |
| case CVMX_HELPER_INTERFACE_MODE_MIXED: |
| case CVMX_HELPER_INTERFACE_MODE_AGL: |
| /* Disable MAC filtering */ |
| gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG); |
| csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, |
| gmx_cfg.u64 & ~1ull); |
| adr_ctl.u64 = 0; |
| adr_ctl.s.bcst = 1; /* Reject broadcast */ |
| csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CTL, adr_ctl.u64); |
| csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CAM_EN, 0); |
| csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64); |
| break; |
| default: |
| printf("%s: Unknown mode %d for interface 0x%x:%d\n", __func__, |
| mode, interface, index); |
| break; |
| } |
| } |
| |
| void nic_stop(struct udevice *dev) |
| { |
| octeon_eth_halt(dev); |
| } |
| |
| int nic_write_hwaddr(struct udevice *dev) |
| { |
| cvm_oct_set_mac_address(dev); |
| |
| return 0; |
| } |
| |
| static const struct eth_ops octeon_nic_ops = { |
| .start = nic_open, |
| .stop = nic_stop, |
| .send = nic_xmit, |
| .recv = nic_recv, |
| .free_pkt = nic_free_pkt, |
| .write_hwaddr = nic_write_hwaddr, |
| }; |
| |
| static const struct udevice_id octeon_nic_ids[] = { |
| { .compatible = "cavium,octeon-7890-bgx" }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(octeon_nic) = { |
| .name = "octeon_nic", |
| .id = UCLASS_ETH, |
| .probe = octeon_nic_probe, |
| .of_match = octeon_nic_ids, |
| .ops = &octeon_nic_ops, |
| .priv_auto = sizeof(struct octeon_eth_info), |
| }; |