| |
| This file contains basic information on the port of U-Boot to TQM8260. |
| All the changes fit in the common U-Boot infrastructure, providing a |
| new TQM8260-specific entry in makefiles. To build U-Boot for TQM8260, |
| type "make TQM8260_config", edit the "include/config_TQM8260.h" file |
| if necessary, then type "make". |
| |
| |
| Common file modifications: |
| -------------------------- |
| |
| The following common files have been modified by this project: |
| (starting from the ppcboot-0.9.3/ directory) |
| |
| MAKEALL - TQM8260 entry added |
| Makefile - TQM8260_config entry added |
| cpu/mpc8260/Makefile - soft_i2c.o module added |
| cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious |
| bug fixed (fcr -> scr) |
| cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added |
| include/flash.h - added definitions for the AM29LV640D Flash chip |
| |
| |
| New files: |
| ---------- |
| |
| The following new files have been added by this project: |
| (starting from the ppcboot-0.9.3/ directory) |
| |
| board/tqm8260/ - board-specific directory |
| board/tqm8260/Makefile - board-specific makefile |
| board/tqm8260/config.mk - config file |
| board/tqm8260/flash.c - flash driver (for AM29LV640D) |
| board/tqm8260/ppcboot.lds - linker script |
| board/tqm8260/tqm8260.c - ioport and memory initialization |
| cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver |
| include/config_TQM8260.h - main configuration file |
| |
| |
| New configuration options: |
| -------------------------- |
| |
| CONFIG_TQM8260 |
| |
| Main board-specific option (should be defined for TQM8260). |
| |
| CONFIG_82xx_CONS_SMC1 |
| |
| If defined, SMC1 will be used as the console |
| |
| CONFIG_82xx_CONS_SMC2 |
| |
| If defined, SMC2 will be used as the console |
| |
| CFG_INIT_LOCAL_SDRAM |
| |
| If defined, the SDRAM on the local bus will be initialized and |
| mapped at BR2. |
| |
| |
| Acceptance criteria tests: |
| -------------------------- |
| |
| The following tests have been conducted to validate the port of U-Boot |
| to TQM8260: |
| |
| 1. Operation on serial console: |
| |
| With the CONFIG_82xx_CONS_SMC1 option defined in the main configuration file, |
| the U-Boot output appeared on the serial terminal connected to COM1 as |
| follows: |
| |
| ------------------------------------------------------------------------------ |
| => help |
| go - start application at address 'addr' |
| run - run commands in an environment variable |
| bootm - boot application image from memory |
| bootp - boot image via network using BootP/TFTP protocol |
| tftpboot- boot image via network using TFTP protocol |
| and env variables ipaddr and serverip |
| rarpboot- boot image via network using RARP/TFTP protocol |
| bootd - boot default, i.e., run 'bootcmd' |
| loads - load S-Record file over serial line |
| loadb - load binary file over serial line (kermit mode) |
| md - memory display |
| mm - memory modify (auto-incrementing) |
| nm - memory modify (constant address) |
| mw - memory write (fill) |
| cp - memory copy |
| cmp - memory compare |
| crc32 - checksum calculation |
| base - print or set address offset |
| printenv- print environment variables |
| setenv - set environment variables |
| saveenv - save environment variables to persistent storage |
| protect - enable or disable FLASH write protection |
| erase - erase FLASH memory |
| flinfo - print FLASH memory information |
| bdinfo - print Board Info structure |
| iminfo - print header information for application image |
| coninfo - print console devices and informations |
| eeprom - EEPROM sub-system |
| loop - infinite loop on address range |
| mtest - simple RAM test |
| icache - enable or disable instruction cache |
| dcache - enable or disable data cache |
| reset - Perform RESET of the CPU |
| echo - echo args to console |
| version - print monitor version |
| help - print online help |
| ? - alias for 'help' |
| => |
| ------------------------------------------------------------------------------ |
| |
| |
| 2. Flash driver operation |
| |
| The following sequence was performed to test the "flinfo" command: |
| |
| ------------------------------------------------------------------------------ |
| => flinfo |
| |
| Bank # 1: AMD 29LV640D (64 M, uniform sector) |
| Size: 32 MB in 128 Sectors |
| Sector Start Addresses: |
| 40000000 40040000 (RO) 40080000 400C0000 40100000 |
| 40140000 40180000 401C0000 40200000 40240000 |
| 40280000 402C0000 40300000 40340000 40380000 |
| 403C0000 40400000 40440000 40480000 404C0000 |
| 40500000 40540000 40580000 405C0000 40600000 |
| 40640000 40680000 406C0000 40700000 40740000 |
| 40780000 407C0000 40800000 40840000 40880000 |
| 408C0000 40900000 40940000 40980000 409C0000 |
| 40A00000 40A40000 40A80000 40AC0000 40B00000 |
| 40B40000 40B80000 40BC0000 40C00000 40C40000 |
| 40C80000 40CC0000 40D00000 40D40000 40D80000 |
| 40DC0000 40E00000 40E40000 40E80000 40EC0000 |
| 40F00000 40F40000 40F80000 40FC0000 41000000 |
| 41040000 41080000 410C0000 41100000 41140000 |
| 41180000 411C0000 41200000 41240000 41280000 |
| 412C0000 41300000 41340000 41380000 413C0000 |
| 41400000 41440000 41480000 414C0000 41500000 |
| 41540000 41580000 415C0000 41600000 41640000 |
| 41680000 416C0000 41700000 41740000 41780000 |
| 417C0000 41800000 41840000 41880000 418C0000 |
| 41900000 41940000 41980000 419C0000 41A00000 |
| 41A40000 41A80000 41AC0000 41B00000 41B40000 |
| 41B80000 41BC0000 41C00000 41C40000 41C80000 |
| 41CC0000 41D00000 41D40000 41D80000 41DC0000 |
| 41E00000 41E40000 41E80000 41EC0000 41F00000 |
| 41F40000 41F80000 41FC0000 |
| => |
| ------------------------------------------------------------------------------ |
| |
| |
| The following sequence was performed to test the erase command: |
| |
| ------------------------------------------------------------------------------ |
| => cp 0 40080000 10 |
| Copy to Flash... done |
| => erase 40080000 400bffff |
| Erase Flash from 0x40080000 to 0x400bffff |
| .. done |
| Erased 1 sectors |
| => md 40080000 |
| 40080000: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080010: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080020: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080030: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080040: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080050: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080060: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080070: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080080: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080090: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800a0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800b0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800c0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800d0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800e0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800f0: ffffffff ffffffff ffffffff ffffffff ................ |
| => cp 0 40080000 10 |
| Copy to Flash... done |
| => erase 1:2 |
| Erase Flash Sectors 2-2 in Bank # 1 |
| .. done |
| => md 40080000 |
| 40080000: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080010: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080020: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080030: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080040: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080050: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080060: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080070: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080080: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080090: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800a0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800b0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800c0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800d0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800e0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800f0: ffffffff ffffffff ffffffff ffffffff ................ |
| => cp 0 40080000 10 |
| Copy to Flash... done |
| => cp 0 400c0000 10 |
| Copy to Flash... done |
| => erase 1:2-3 |
| Erase Flash Sectors 2-3 in Bank # 1 |
| ... done |
| => md 40080000 |
| 40080000: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080010: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080020: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080030: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080040: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080050: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080060: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080070: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080080: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080090: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800a0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800b0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800c0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800d0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800e0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800f0: ffffffff ffffffff ffffffff ffffffff ................ |
| => md 400c0000 |
| 400c0000: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0010: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0020: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0030: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0040: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0050: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0060: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0070: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0080: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c0090: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c00a0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c00b0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c00c0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c00d0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c00e0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400c00f0: ffffffff ffffffff ffffffff ffffffff ................ |
| => |
| ------------------------------------------------------------------------------ |
| |
| |
| The following sequence was performed to test the Flash programming commands: |
| |
| ------------------------------------------------------------------------------ |
| => erase 40080000 400bffff |
| Erase Flash from 0x40080000 to 0x400bffff |
| .. done |
| Erased 1 sectors |
| => cp 0 40080000 10 |
| Copy to Flash... done |
| => md 0 |
| 00000000: 00000000 00000104 61100200 01000000 ........a....... |
| 00000010: 00000000 00000000 81140000 82000100 ................ |
| 00000020: 01080000 00004000 22800000 00000600 ......@."....... |
| 00000030: 00200800 00000000 10000100 00008000 . .............. |
| 00000040: 00812000 00000200 00020000 80000000 .. ............. |
| 00000050: 00028001 00001000 00040400 00000200 ................ |
| 00000060: 20480000 00000000 20090000 00142000 H...... ..... . |
| 00000070: 00000000 00004000 24210000 10000000 ......@.$!...... |
| 00000080: 02440002 10000000 00200008 00000000 .D....... ...... |
| 00000090: 02440900 00000000 30a40000 00004400 .D......0.....D. |
| 000000a0: 04420800 00000000 00000040 00020000 .B.........@.... |
| 000000b0: 05020000 00100000 00060000 00000000 ................ |
| 000000c0: 00400000 00000000 00080000 00040000 .@.............. |
| 000000d0: 10400000 00800004 00000000 00000200 .@.............. |
| 000000e0: 80890000 00010004 00080000 00000020 ............... |
| 000000f0: 08000000 10000000 00010000 00000000 ................ |
| => md 40080000 |
| 40080000: 00000000 00000104 61100200 01000000 ........a....... |
| 40080010: 00000000 00000000 81140000 82000100 ................ |
| 40080020: 01080000 00004000 22800000 00000600 ......@."....... |
| 40080030: 00200800 00000000 10000100 00008000 . .............. |
| 40080040: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080050: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080060: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080070: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080080: ffffffff ffffffff ffffffff ffffffff ................ |
| 40080090: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800a0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800b0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800c0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800d0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800e0: ffffffff ffffffff ffffffff ffffffff ................ |
| 400800f0: ffffffff ffffffff ffffffff ffffffff ................ |
| => |
| ------------------------------------------------------------------------------ |
| |
| |
| The following sequence was performed to test storage of the environment |
| variables in Flash: |
| |
| ------------------------------------------------------------------------------ |
| => setenv foo bar |
| => saveenv |
| Un-Protected 1 sectors |
| Erasing Flash... |
| .. done |
| Erased 1 sectors |
| Saving Environment to Flash... |
| Protected 1 sectors |
| => reset |
| ... |
| => printenv |
| bootdelay=CONFIG_BOOTDELAY |
| baudrate=9600 |
| ipaddr=192.168.4.7 |
| serverip=192.168.4.1 |
| ethaddr=66:55:44:33:22:11 |
| foo=bar |
| stdin=serial |
| stdout=serial |
| stderr=serial |
| |
| Environment size: 170/262140 bytes |
| => |
| ------------------------------------------------------------------------------ |
| |
| |
| The following sequence was performed to test image download and run over |
| Ethernet interface (both interfaces were tested): |
| |
| ------------------------------------------------------------------------------ |
| => tftpboot 40000 hello_world.bin |
| ARP broadcast 1 |
| TFTP from server 192.168.2.2; our IP address is 192.168.2.7 |
| Filename 'hello_world.bin'. |
| Load address: 0x40000 |
| Loading: ############# |
| done |
| Bytes transferred = 65912 (10178 hex) |
| => go 40004 |
| ## Starting application at 0x00040004 ... |
| Hello World |
| argc = 1 |
| argv[0] = "40004" |
| argv[1] = "<NULL>" |
| Hit any key to exit ... |
| |
| ## Application terminated, rc = 0x0 |
| => |
| ------------------------------------------------------------------------------ |
| |
| |
| The following sequence was performed to test eeprom read/write commands: |
| |
| ------------------------------------------------------------------------------ |
| => md 40000 |
| 00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a.. |
| 00040010: 90010024 48000005 7fc802a6 801effe8 ...$H........... |
| 00040020: 7fc0f214 7c7f1b78 813f004c 7c9c2378 ....|..x.?.L|.#x |
| 00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`.. |
| 00040040: 7c0803a6 4e800021 813f004c 7f84e378 |...N..!.?.L...x |
| 00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..! |
| 00040060: 7c1be000 4181003c 80bd0000 813f004c |...A..<.....?.L |
| 00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,...@....... |
| 00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{.. |
| 00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@... |
| 000400a0: 813f004c 807e8010 80090010 7c0803a6 .?.L.~......|... |
| 000400b0: 4e800021 813f004c 80090004 7c0803a6 N..!.?.L....|... |
| 000400c0: 4e800021 2c030000 4182ffec 813f004c N..!,...A....?.L |
| 000400d0: 80090000 7c0803a6 4e800021 813f004c ....|...N..!.?.L |
| 000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..! |
| 000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a.. |
| => eeprom write 40000 0 40 |
| |
| EEPROM write: addr 00040000 off 0000 count 64 ... done |
| => mw 50000 0 1000 |
| => eeprom read 50000 0 40 |
| |
| EEPROM read: addr 00050000 off 0000 count 64 ... done |
| => md 50000 |
| 00050000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a.. |
| 00050010: 90010024 48000005 7fc802a6 801effe8 ...$H........... |
| 00050020: 7fc0f214 7c7f1b78 813f004c 7c9c2378 ....|..x.?.L|.#x |
| 00050030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`.. |
| 00050040: 00000000 00000000 00000000 00000000 ................ |
| 00050050: 00000000 00000000 00000000 00000000 ................ |
| 00050060: 00000000 00000000 00000000 00000000 ................ |
| 00050070: 00000000 00000000 00000000 00000000 ................ |
| 00050080: 00000000 00000000 00000000 00000000 ................ |
| 00050090: 00000000 00000000 00000000 00000000 ................ |
| 000500a0: 00000000 00000000 00000000 00000000 ................ |
| 000500b0: 00000000 00000000 00000000 00000000 ................ |
| 000500c0: 00000000 00000000 00000000 00000000 ................ |
| 000500d0: 00000000 00000000 00000000 00000000 ................ |
| 000500e0: 00000000 00000000 00000000 00000000 ................ |
| 000500f0: 00000000 00000000 00000000 00000000 ................ |
| => |
| ------------------------------------------------------------------------------ |
| |
| |
| Patch per Mon, 06 Aug 2001 17:57:27: |
| |
| - upgraded Flash support (added support for the following chips: |
| AM29LV800T/B, AM29LV160T/B, AM29DL322T/B, AM29DL323T/B) |
| - BCR tweakage for the 8260 bus mode |
| - SIUMCR tweakage enabling the MI interrupt (IRQ7) |
| |
| To simplify switching between the bus modes, a new configuration |
| option (CONFIG_BUSMODE_60x) has been added to the "config_TQM8260.h" |
| file. If it is defined, BCR will be configured for the 60x mode, |
| otherwise - for the 8260 mode. |
| |
| Concerning the SIUMCR modification: it's hard to predict whether it |
| will induce any problems on the other (60x mode) board. However, the |
| problems (if they appear) should be easy to notice - if the board |
| does not boot, it's most likely caused by the DPPC configuration in |
| SIUMCR. |