| /* |
| * CPUAT91 by (C) Copyright 2006 Eric Benard |
| * eric@eukrea.com |
| * |
| * Configuration settings for the CPUAT91 board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #ifdef CONFIG_CPUAT91_RAM |
| #define CONFIG_SKIP_LOWLEVEL_INIT 1 |
| #define CONFIG_SKIP_RELOCATE_UBOOT 1 |
| #define CONFIG_CPUAT91 1 |
| #else |
| #define CONFIG_BOOTDELAY 1 |
| #endif |
| |
| #define AT91C_MAIN_CLOCK 179712000 |
| #define AT91C_MASTER_CLOCK 59904000 |
| |
| #define AT91_SLOW_CLOCK 32768 |
| |
| #define CONFIG_ARM920T 1 |
| #define CONFIG_AT91RM9200 1 |
| |
| #undef CONFIG_USE_IRQ |
| #define USE_920T_MMU 1 |
| |
| #define CONFIG_CMDLINE_TAG 1 |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_INITRD_TAG 1 |
| |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
| #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 |
| /* flash */ |
| #define CONFIG_SYS_MC_PUIA_VAL 0x00000000 |
| #define CONFIG_SYS_MC_PUP_VAL 0x00000000 |
| #define CONFIG_SYS_MC_PUER_VAL 0x00000000 |
| #define CONFIG_SYS_MC_ASR_VAL 0x00000000 |
| #define CONFIG_SYS_MC_AASR_VAL 0x00000000 |
| #define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 |
| #define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ |
| |
| /* clocks */ |
| #define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ |
| #define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB */ |
| #define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock */ |
| |
| /* sdram */ |
| #define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as D16/D31 */ |
| #define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 |
| #define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 |
| #define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ |
| #define CONFIG_SYS_SDRC_CR_VAL 0x2188C155 /* set up the SDRAM */ |
| #define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ |
| #define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ |
| #define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ |
| #define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ |
| #define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ |
| #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ |
| #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ |
| #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ |
| #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ |
| |
| /* define one of these to choose the DBGU, USART0 or USART1 as console */ |
| #define CONFIG_AT91RM9200_USART 1 |
| #define CONFIG_DBGU 1 |
| #undef CONFIG_USART0 |
| #undef CONFIG_USART1 |
| |
| #define CONFIG_HARD_I2C 1 |
| |
| #if defined(CONFIG_HARD_I2C) |
| #define CONFIG_SYS_I2C_SPEED 50000 |
| #define CONFIG_SYS_I2C_SLAVE 0 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 |
| #endif |
| |
| #define CONFIG_BOOTP_BOOTFILESIZE 1 |
| #define CONFIG_BOOTP_BOOTPATH 1 |
| #define CONFIG_BOOTP_GATEWAY 1 |
| #define CONFIG_BOOTP_HOSTNAME 1 |
| |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_DHCP 1 |
| #define CONFIG_CMD_PING 1 |
| #define CONFIG_CMD_MII 1 |
| #define CONFIG_CMD_CACHE 1 |
| #undef CONFIG_CMD_USB |
| #undef CONFIG_CMD_FPGA |
| #undef CONFIG_CMD_IMI |
| #undef CONFIG_CMD_LOADS |
| #undef CONFIG_CMD_NFS |
| |
| #if defined(CONFIG_HARD_I2C) |
| #define CONFIG_CMD_EEPROM 1 |
| #define CONFIG_CMD_I2C 1 |
| #endif |
| |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define PHYS_SDRAM 0x20000000 |
| #define PHYS_SDRAM_SIZE 0x02000000 |
| |
| #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM |
| #define CONFIG_SYS_MEMTEST_END \ |
| (CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024) |
| |
| #define CONFIG_DRIVER_ETHER 1 |
| #define CONFIG_NET_RETRY_COUNT 20 |
| #define CONFIG_AT91C_USE_RMII 1 |
| #define CONFIG_PHY_ADDRESS (1 << 5) |
| #define CONFIG_KS8721_PHY 1 |
| |
| #define CONFIG_SYS_FLASH_CFI 1 |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| #define CONFIG_SYS_FLASH_EMPTY_INFO 1 |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_FLASH_PROTECTION 1 |
| #define PHYS_FLASH_1 0x10000000 |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 |
| |
| #if defined(CONFIG_CMD_USB) |
| #define CONFIG_USB_OHCI_NEW 1 |
| #define CONFIG_USB_STORAGE 1 |
| #define CONFIG_DOS_PARTITION 1 |
| #define CONFIG_AT91C_PQFP_UHPBU 1 |
| #undef CONFIG_SYS_USB_OHCI_BOARD_INIT |
| #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 |
| #define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE |
| #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" |
| #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 |
| #endif |
| |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) |
| #define CONFIG_ENV_SIZE 0x20000 |
| #define CONFIG_ENV_SECT_SIZE 0x20000 |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x21000000 |
| |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } |
| |
| #define CONFIG_SYS_PROMPT "CPUAT91=> " |
| #define CONFIG_SYS_CBSIZE 256 |
| #define CONFIG_SYS_MAXARGS 32 |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_CMDLINE_EDITING 1 |
| #define CONFIG_SYS_LONGHELP 1 |
| |
| #define CONFIG_SYS_HZ 1000 |
| #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) |
| |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 |
| #define CONFIG_STACKSIZE (32 * 1024) |
| |
| #if defined(CONFIG_USE_IRQ) |
| #error CONFIG_USE_IRQ not supported |
| #endif |
| |
| #define CONFIG_DEVICE_NULLDEV 1 |
| #define CONFIG_SILENT_CONSOLE 1 |
| |
| #define CONFIG_AUTOBOOT_KEYED 1 |
| #define CONFIG_AUTOBOOT_PROMPT \ |
| "Press SPACE to abort autoboot in %d seconds\n" |
| #define CONFIG_AUTOBOOT_STOP_STR " " |
| #define CONFIG_AUTOBOOT_DELAY_STR "d" |
| |
| #define CONFIG_VERSION_VARIABLE 1 |
| |
| #define MTDIDS_DEFAULT "nor0=physmap-flash.0" |
| #define MTDPARTS_DEFAULT \ |
| "mtdparts=physmap-flash.0:" \ |
| "128k(u-boot)ro," \ |
| "128k(u-boot-env)," \ |
| "1408k(kernel)," \ |
| "-(rootfs)" |
| |
| #define CONFIG_BOOTARGS \ |
| "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200" |
| |
| #define CONFIG_BOOTCOMMAND "run flashboot" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "mtdid=" MTDIDS_DEFAULT "\0" \ |
| "mtdparts=" MTDPARTS_DEFAULT "\0" \ |
| "flub=tftp 21000000 cpuat91/u-boot.bin; protect off 10000000 " \ |
| "1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \ |
| "10000000 ${filesize}\0" \ |
| "flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \ |
| "1019ffff; erase 10040000 1019ffff; cp.b 21000000 " \ |
| "10040000 ${filesize}\0" \ |
| "flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \ |
| "101a0000 10ffffff; erase 101a0000 10ffffff; cp.b " \ |
| "21000000 101A0000 ${filesize}\0" \ |
| "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ |
| "flashboot=run ramargs;bootm 10040000\0" \ |
| "netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \ |
| "bootm 21000000\0" |
| #endif /* __CONFIG_H */ |