| /* |
| * (C) Copyright 2007 |
| * Sascha Hauer, Pengutronix |
| * |
| * (C) Copyright 2009 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <bootm.h> |
| #include <common.h> |
| #include <netdev.h> |
| #include <asm/errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/crm_regs.h> |
| #include <ipu_pixfmt.h> |
| |
| #ifdef CONFIG_FSL_ESDHC |
| #include <fsl_esdhc.h> |
| #endif |
| |
| char *get_reset_cause(void) |
| { |
| u32 cause; |
| struct src *src_regs = (struct src *)SRC_BASE_ADDR; |
| |
| cause = readl(&src_regs->srsr); |
| writel(cause, &src_regs->srsr); |
| |
| switch (cause) { |
| case 0x00001: |
| case 0x00011: |
| return "POR"; |
| case 0x00004: |
| return "CSU"; |
| case 0x00008: |
| return "IPP USER"; |
| case 0x00010: |
| return "WDOG"; |
| case 0x00020: |
| return "JTAG HIGH-Z"; |
| case 0x00040: |
| return "JTAG SW"; |
| case 0x10000: |
| return "WARM BOOT"; |
| default: |
| return "unknown reset"; |
| } |
| } |
| |
| #if defined(CONFIG_MX53) || defined(CONFIG_MX6) |
| #if defined(CONFIG_MX53) |
| #define MEMCTL_BASE ESDCTL_BASE_ADDR |
| #else |
| #define MEMCTL_BASE MMDC_P0_BASE_ADDR |
| #endif |
| static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9}; |
| static const unsigned char bank_lookup[] = {3, 2}; |
| |
| /* these MMDC registers are common to the IMX53 and IMX6 */ |
| struct esd_mmdc_regs { |
| uint32_t ctl; |
| uint32_t pdc; |
| uint32_t otc; |
| uint32_t cfg0; |
| uint32_t cfg1; |
| uint32_t cfg2; |
| uint32_t misc; |
| }; |
| |
| #define ESD_MMDC_CTL_GET_ROW(mdctl) ((ctl >> 24) & 7) |
| #define ESD_MMDC_CTL_GET_COLUMN(mdctl) ((ctl >> 20) & 7) |
| #define ESD_MMDC_CTL_GET_WIDTH(mdctl) ((ctl >> 16) & 3) |
| #define ESD_MMDC_CTL_GET_CS1(mdctl) ((ctl >> 30) & 1) |
| #define ESD_MMDC_MISC_GET_BANK(mdmisc) ((misc >> 5) & 1) |
| |
| /* |
| * imx_ddr_size - return size in bytes of DRAM according MMDC config |
| * The MMDC MDCTL register holds the number of bits for row, col, and data |
| * width and the MMDC MDMISC register holds the number of banks. Combine |
| * all these bits to determine the meme size the MMDC has been configured for |
| */ |
| unsigned imx_ddr_size(void) |
| { |
| struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE; |
| unsigned ctl = readl(&mem->ctl); |
| unsigned misc = readl(&mem->misc); |
| int bits = 11 + 0 + 0 + 1; /* row + col + bank + width */ |
| |
| bits += ESD_MMDC_CTL_GET_ROW(ctl); |
| bits += col_lookup[ESD_MMDC_CTL_GET_COLUMN(ctl)]; |
| bits += bank_lookup[ESD_MMDC_MISC_GET_BANK(misc)]; |
| bits += ESD_MMDC_CTL_GET_WIDTH(ctl); |
| bits += ESD_MMDC_CTL_GET_CS1(ctl); |
| |
| /* The MX6 can do only 3840 MiB of DRAM */ |
| if (bits == 32) |
| return 0xf0000000; |
| |
| return 1 << bits; |
| } |
| #endif |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| |
| const char *get_imx_type(u32 imxtype) |
| { |
| switch (imxtype) { |
| case MXC_CPU_MX6Q: |
| return "6Q"; /* Quad-core version of the mx6 */ |
| case MXC_CPU_MX6D: |
| return "6D"; /* Dual-core version of the mx6 */ |
| case MXC_CPU_MX6DL: |
| return "6DL"; /* Dual Lite version of the mx6 */ |
| case MXC_CPU_MX6SOLO: |
| return "6SOLO"; /* Solo version of the mx6 */ |
| case MXC_CPU_MX6SL: |
| return "6SL"; /* Solo-Lite version of the mx6 */ |
| case MXC_CPU_MX6SX: |
| return "6SX"; /* SoloX version of the mx6 */ |
| case MXC_CPU_MX51: |
| return "51"; |
| case MXC_CPU_MX53: |
| return "53"; |
| default: |
| return "??"; |
| } |
| } |
| |
| int print_cpuinfo(void) |
| { |
| u32 cpurev; |
| |
| cpurev = get_cpu_rev(); |
| |
| printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n", |
| get_imx_type((cpurev & 0xFF000) >> 12), |
| (cpurev & 0x000F0) >> 4, |
| (cpurev & 0x0000F) >> 0, |
| mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| printf("Reset cause: %s\n", get_reset_cause()); |
| return 0; |
| } |
| #endif |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| int rc = -ENODEV; |
| |
| #if defined(CONFIG_FEC_MXC) |
| rc = fecmxc_initialize(bis); |
| #endif |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_FSL_ESDHC |
| /* |
| * Initializes on-chip MMC controllers. |
| * to override, implement board_mmc_init() |
| */ |
| int cpu_mmc_init(bd_t *bis) |
| { |
| return fsl_esdhc_mmc_init(bis); |
| } |
| #endif |
| |
| u32 get_ahb_clk(void) |
| { |
| struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; |
| u32 reg, ahb_podf; |
| |
| reg = __raw_readl(&imx_ccm->cbcdr); |
| reg &= MXC_CCM_CBCDR_AHB_PODF_MASK; |
| ahb_podf = reg >> MXC_CCM_CBCDR_AHB_PODF_OFFSET; |
| |
| return get_periph_clk() / (ahb_podf + 1); |
| } |
| |
| #if defined(CONFIG_VIDEO_IPUV3) |
| void arch_preboot_os(void) |
| { |
| /* disable video before launching O/S */ |
| ipuv3_fb_shutdown(); |
| } |
| #endif |