| /* |
| * Copyright (C) 2011 Infineon Technologies |
| * |
| * Authors: |
| * Peter Huewe <huewe.external@infineon.com> |
| * |
| * Description: |
| * Device driver for TCG/TCPA TPM (trusted platform module). |
| * Specifications at www.trustedcomputinggroup.org |
| * |
| * This device driver implements the TPM interface as defined in |
| * the TCG TPM Interface Spec version 1.2, revision 1.0 and the |
| * Infineon I2C Protocol Stack Specification v0.20. |
| * |
| * It is based on the Linux kernel driver tpm.c from Leendert van |
| * Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall. |
| * |
| * Version: 2.1.1 |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <linux/compiler.h> |
| #include <i2c.h> |
| #include <tis.h> |
| #include <tpm.h> |
| #include <asm-generic/errno.h> |
| #include <linux/types.h> |
| #include <linux/unaligned/be_byteshift.h> |
| |
| #include "tpm_tis_i2c.h" |
| #include "tpm_internal.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static const char * const chip_name[] = { |
| [SLB9635] = "slb9635tt", |
| [SLB9645] = "slb9645tt", |
| [UNKNOWN] = "unknown/fallback to slb9635", |
| }; |
| |
| static struct tpm_chip g_chip; |
| |
| /* |
| * tpm_tis_i2c_read() - read from TPM register |
| * @addr: register address to read from |
| * @buffer: provided by caller |
| * @len: number of bytes to read |
| * |
| * Read len bytes from TPM register and put them into |
| * buffer (little-endian format, i.e. first byte is put into buffer[0]). |
| * |
| * NOTE: TPM is big-endian for multi-byte values. Multi-byte |
| * values have to be swapped. |
| * |
| * Return -EIO on error, 0 on success. |
| */ |
| static int tpm_tis_i2c_read(u8 addr, u8 *buffer, size_t len) |
| { |
| int rc; |
| int count; |
| uint32_t addrbuf = addr; |
| |
| if ((g_chip.chip_type == SLB9635) || (g_chip.chip_type == UNKNOWN)) { |
| /* slb9635 protocol should work in both cases */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| rc = dm_i2c_write(g_chip.dev, 0, (uchar *)&addrbuf, 1); |
| if (rc == 0) |
| break; /* Success, break to skip sleep */ |
| udelay(SLEEP_DURATION_US); |
| } |
| if (rc) |
| return -rc; |
| |
| /* After the TPM has successfully received the register address |
| * it needs some time, thus we're sleeping here again, before |
| * retrieving the data |
| */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| udelay(SLEEP_DURATION_US); |
| rc = dm_i2c_read(g_chip.dev, 0, buffer, len); |
| if (rc == 0) |
| break; /* success, break to skip sleep */ |
| } |
| } else { |
| /* |
| * Use a combined read for newer chips. |
| * Unfortunately the smbus functions are not suitable due to |
| * the 32 byte limit of the smbus. |
| * Retries should usually not be needed, but are kept just to |
| * be safe on the safe side. |
| */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| rc = dm_i2c_read(g_chip.dev, addr, buffer, len); |
| if (rc == 0) |
| break; /* break here to skip sleep */ |
| udelay(SLEEP_DURATION_US); |
| } |
| } |
| |
| /* Take care of 'guard time' */ |
| udelay(SLEEP_DURATION_US); |
| if (rc) |
| return -rc; |
| |
| return 0; |
| } |
| |
| static int tpm_tis_i2c_write_generic(u8 addr, u8 *buffer, size_t len, |
| unsigned int sleep_time_us, u8 max_count) |
| { |
| int rc = 0; |
| int count; |
| |
| for (count = 0; count < max_count; count++) { |
| rc = dm_i2c_write(g_chip.dev, addr, buffer, len); |
| if (rc == 0) |
| break; /* Success, break to skip sleep */ |
| udelay(sleep_time_us); |
| } |
| |
| /* take care of 'guard time' */ |
| udelay(sleep_time_us); |
| if (rc) |
| return -rc; |
| |
| return 0; |
| } |
| |
| /* |
| * tpm_tis_i2c_write() - write to TPM register |
| * @addr: register address to write to |
| * @buffer: containing data to be written |
| * @len: number of bytes to write |
| * |
| * Write len bytes from provided buffer to TPM register (little |
| * endian format, i.e. buffer[0] is written as first byte). |
| * |
| * NOTE: TPM is big-endian for multi-byte values. Multi-byte |
| * values have to be swapped. |
| * |
| * NOTE: use this function instead of the tpm_tis_i2c_write_generic function. |
| * |
| * Return -EIO on error, 0 on success |
| */ |
| static int tpm_tis_i2c_write(u8 addr, u8 *buffer, size_t len) |
| { |
| return tpm_tis_i2c_write_generic(addr, buffer, len, SLEEP_DURATION_US, |
| MAX_COUNT); |
| } |
| |
| /* |
| * This function is needed especially for the cleanup situation after |
| * sending TPM_READY |
| */ |
| static int tpm_tis_i2c_write_long(u8 addr, u8 *buffer, size_t len) |
| { |
| return tpm_tis_i2c_write_generic(addr, buffer, len, |
| SLEEP_DURATION_LONG_US, |
| MAX_COUNT_LONG); |
| } |
| |
| static int tpm_tis_i2c_check_locality(struct tpm_chip *chip, int loc) |
| { |
| const u8 mask = TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID; |
| u8 buf; |
| int rc; |
| |
| rc = tpm_tis_i2c_read(TPM_ACCESS(loc), &buf, 1); |
| if (rc < 0) |
| return rc; |
| |
| if ((buf & mask) == mask) { |
| chip->locality = loc; |
| return loc; |
| } |
| |
| return -1; |
| } |
| |
| static void tpm_tis_i2c_release_locality(struct tpm_chip *chip, int loc, |
| int force) |
| { |
| const u8 mask = TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID; |
| u8 buf; |
| |
| if (tpm_tis_i2c_read(TPM_ACCESS(loc), &buf, 1) < 0) |
| return; |
| |
| if (force || (buf & mask) == mask) { |
| buf = TPM_ACCESS_ACTIVE_LOCALITY; |
| tpm_tis_i2c_write(TPM_ACCESS(loc), &buf, 1); |
| } |
| } |
| |
| static int tpm_tis_i2c_request_locality(struct tpm_chip *chip, int loc) |
| { |
| unsigned long start, stop; |
| u8 buf = TPM_ACCESS_REQUEST_USE; |
| int rc; |
| |
| if (tpm_tis_i2c_check_locality(chip, loc) >= 0) |
| return loc; /* We already have the locality */ |
| |
| rc = tpm_tis_i2c_write(TPM_ACCESS(loc), &buf, 1); |
| if (rc) |
| return rc; |
| |
| /* Wait for burstcount */ |
| start = get_timer(0); |
| stop = chip->timeout_a; |
| do { |
| if (tpm_tis_i2c_check_locality(chip, loc) >= 0) |
| return loc; |
| mdelay(TPM_TIMEOUT_MS); |
| } while (get_timer(start) < stop); |
| |
| return -1; |
| } |
| |
| static u8 tpm_tis_i2c_status(struct tpm_chip *chip) |
| { |
| /* NOTE: Since i2c read may fail, return 0 in this case --> time-out */ |
| u8 buf; |
| |
| if (tpm_tis_i2c_read(TPM_STS(chip->locality), &buf, 1) < 0) |
| return 0; |
| else |
| return buf; |
| } |
| |
| static void tpm_tis_i2c_ready(struct tpm_chip *chip) |
| { |
| int rc; |
| |
| /* This causes the current command to be aborted */ |
| u8 buf = TPM_STS_COMMAND_READY; |
| |
| debug("%s\n", __func__); |
| rc = tpm_tis_i2c_write_long(TPM_STS(chip->locality), &buf, 1); |
| if (rc) |
| debug("%s: rc=%d\n", __func__, rc); |
| } |
| |
| static ssize_t tpm_tis_i2c_get_burstcount(struct tpm_chip *chip) |
| { |
| unsigned long start, stop; |
| ssize_t burstcnt; |
| u8 addr, buf[3]; |
| |
| /* Wait for burstcount */ |
| /* XXX: Which timeout value? Spec has 2 answers (c & d) */ |
| start = get_timer(0); |
| stop = chip->timeout_d; |
| do { |
| /* Note: STS is little endian */ |
| addr = TPM_STS(chip->locality) + 1; |
| if (tpm_tis_i2c_read(addr, buf, 3) < 0) |
| burstcnt = 0; |
| else |
| burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0]; |
| |
| if (burstcnt) |
| return burstcnt; |
| mdelay(TPM_TIMEOUT_MS); |
| } while (get_timer(start) < stop); |
| |
| return -EBUSY; |
| } |
| |
| static int tpm_tis_i2c_wait_for_stat(struct tpm_chip *chip, u8 mask, |
| unsigned long timeout, int *status) |
| { |
| unsigned long start, stop; |
| |
| /* Check current status */ |
| *status = tpm_tis_i2c_status(chip); |
| if ((*status & mask) == mask) |
| return 0; |
| |
| start = get_timer(0); |
| stop = timeout; |
| do { |
| mdelay(TPM_TIMEOUT_MS); |
| *status = tpm_tis_i2c_status(chip); |
| if ((*status & mask) == mask) |
| return 0; |
| } while (get_timer(start) < stop); |
| |
| return -ETIME; |
| } |
| |
| static int tpm_tis_i2c_recv_data(struct tpm_chip *chip, u8 *buf, size_t count) |
| { |
| size_t size = 0; |
| ssize_t burstcnt; |
| int rc; |
| |
| while (size < count) { |
| burstcnt = tpm_tis_i2c_get_burstcount(chip); |
| |
| /* burstcount < 0 -> tpm is busy */ |
| if (burstcnt < 0) |
| return burstcnt; |
| |
| /* Limit received data to max left */ |
| if (burstcnt > (count - size)) |
| burstcnt = count - size; |
| |
| rc = tpm_tis_i2c_read(TPM_DATA_FIFO(chip->locality), |
| &(buf[size]), burstcnt); |
| if (rc == 0) |
| size += burstcnt; |
| } |
| |
| return size; |
| } |
| |
| static int tpm_tis_i2c_recv(struct tpm_chip *chip, u8 *buf, size_t count) |
| { |
| int size = 0; |
| int expected, status; |
| |
| if (count < TPM_HEADER_SIZE) { |
| size = -EIO; |
| goto out; |
| } |
| |
| /* Read first 10 bytes, including tag, paramsize, and result */ |
| size = tpm_tis_i2c_recv_data(chip, buf, TPM_HEADER_SIZE); |
| if (size < TPM_HEADER_SIZE) { |
| error("Unable to read header\n"); |
| goto out; |
| } |
| |
| expected = get_unaligned_be32(buf + TPM_RSP_SIZE_BYTE); |
| if ((size_t)expected > count) { |
| error("Error size=%x, expected=%x, count=%x\n", size, expected, |
| count); |
| size = -EIO; |
| goto out; |
| } |
| |
| size += tpm_tis_i2c_recv_data(chip, &buf[TPM_HEADER_SIZE], |
| expected - TPM_HEADER_SIZE); |
| if (size < expected) { |
| error("Unable to read remainder of result\n"); |
| size = -ETIME; |
| goto out; |
| } |
| |
| tpm_tis_i2c_wait_for_stat(chip, TPM_STS_VALID, chip->timeout_c, |
| &status); |
| if (status & TPM_STS_DATA_AVAIL) { /* Retry? */ |
| error("Error left over data\n"); |
| size = -EIO; |
| goto out; |
| } |
| |
| out: |
| tpm_tis_i2c_ready(chip); |
| /* |
| * The TPM needs some time to clean up here, |
| * so we sleep rather than keeping the bus busy |
| */ |
| mdelay(2); |
| tpm_tis_i2c_release_locality(chip, chip->locality, 0); |
| |
| return size; |
| } |
| |
| static int tpm_tis_i2c_send(struct tpm_chip *chip, u8 *buf, size_t len) |
| { |
| int rc, status; |
| size_t burstcnt; |
| size_t count = 0; |
| int retry = 0; |
| u8 sts = TPM_STS_GO; |
| |
| debug("%s: len=%d\n", __func__, len); |
| if (len > TPM_DEV_BUFSIZE) |
| return -E2BIG; /* Command is too long for our tpm, sorry */ |
| |
| if (tpm_tis_i2c_request_locality(chip, 0) < 0) |
| return -EBUSY; |
| |
| status = tpm_tis_i2c_status(chip); |
| if ((status & TPM_STS_COMMAND_READY) == 0) { |
| tpm_tis_i2c_ready(chip); |
| if (tpm_tis_i2c_wait_for_stat(chip, TPM_STS_COMMAND_READY, |
| chip->timeout_b, &status) < 0) { |
| rc = -ETIME; |
| goto out_err; |
| } |
| } |
| |
| burstcnt = tpm_tis_i2c_get_burstcount(chip); |
| |
| /* burstcount < 0 -> tpm is busy */ |
| if (burstcnt < 0) |
| return burstcnt; |
| |
| while (count < len) { |
| udelay(300); |
| if (burstcnt > len - count) |
| burstcnt = len - count; |
| |
| #ifdef CONFIG_TPM_TIS_I2C_BURST_LIMITATION |
| if (retry && burstcnt > CONFIG_TPM_TIS_I2C_BURST_LIMITATION) |
| burstcnt = CONFIG_TPM_TIS_I2C_BURST_LIMITATION; |
| #endif /* CONFIG_TPM_TIS_I2C_BURST_LIMITATION */ |
| |
| rc = tpm_tis_i2c_write(TPM_DATA_FIFO(chip->locality), |
| &(buf[count]), burstcnt); |
| if (rc == 0) |
| count += burstcnt; |
| else { |
| debug("%s: error\n", __func__); |
| if (retry++ > 10) { |
| rc = -EIO; |
| goto out_err; |
| } |
| rc = tpm_tis_i2c_wait_for_stat(chip, TPM_STS_VALID, |
| chip->timeout_c, |
| &status); |
| if (rc) |
| goto out_err; |
| |
| if ((status & TPM_STS_DATA_EXPECT) == 0) { |
| rc = -EIO; |
| goto out_err; |
| } |
| } |
| } |
| |
| /* Go and do it */ |
| tpm_tis_i2c_write(TPM_STS(chip->locality), &sts, 1); |
| debug("done\n"); |
| |
| return len; |
| |
| out_err: |
| debug("%s: out_err\n", __func__); |
| tpm_tis_i2c_ready(chip); |
| /* |
| * The TPM needs some time to clean up here, |
| * so we sleep rather than keeping the bus busy |
| */ |
| mdelay(2); |
| tpm_tis_i2c_release_locality(chip, chip->locality, 0); |
| |
| return rc; |
| } |
| |
| static enum i2c_chip_type tpm_tis_i2c_chip_type(void) |
| { |
| #if CONFIG_IS_ENABLED(OF_CONTROL) |
| const void *blob = gd->fdt_blob; |
| |
| if (fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9645_TPM) >= 0) |
| return SLB9645; |
| |
| if (fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9635_TPM) >= 0) |
| return SLB9635; |
| #endif |
| return UNKNOWN; |
| } |
| |
| static int tpm_tis_i2c_init(struct udevice *dev) |
| { |
| struct tpm_chip *chip = &g_chip; |
| u32 vendor; |
| u32 expected_did_vid; |
| |
| g_chip.dev = dev; |
| g_chip.chip_type = tpm_tis_i2c_chip_type(); |
| chip->is_open = 1; |
| |
| /* Disable interrupts (not supported) */ |
| chip->irq = 0; |
| |
| /* Default timeouts - these could move to the device tree */ |
| chip->timeout_a = TIS_SHORT_TIMEOUT_MS; |
| chip->timeout_b = TIS_LONG_TIMEOUT_MS; |
| chip->timeout_c = TIS_SHORT_TIMEOUT_MS; |
| chip->timeout_d = TIS_SHORT_TIMEOUT_MS; |
| chip->req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID; |
| chip->req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID; |
| chip->req_canceled = TPM_STS_COMMAND_READY; |
| |
| if (tpm_tis_i2c_request_locality(chip, 0) < 0) |
| return -ENODEV; |
| |
| /* Read four bytes from DID_VID register */ |
| if (tpm_tis_i2c_read(TPM_DID_VID(0), (uchar *)&vendor, 4) < 0) { |
| tpm_tis_i2c_release_locality(chip, 0, 1); |
| return -EIO; |
| } |
| |
| if (g_chip.chip_type == SLB9635) { |
| vendor = be32_to_cpu(vendor); |
| expected_did_vid = TPM_TIS_I2C_DID_VID_9635; |
| } else { |
| /* device id and byte order has changed for newer i2c tpms */ |
| expected_did_vid = TPM_TIS_I2C_DID_VID_9645; |
| } |
| |
| if (g_chip.chip_type != UNKNOWN && vendor != expected_did_vid) { |
| error("Vendor id did not match! ID was %08x\n", vendor); |
| return -ENODEV; |
| } |
| |
| debug("1.2 TPM (chip type %s device-id 0x%X)\n", |
| chip_name[g_chip.chip_type], vendor >> 16); |
| |
| /* |
| * A timeout query to TPM can be placed here. |
| * Standard timeout values are used so far |
| */ |
| |
| return 0; |
| } |
| |
| /* Returns max number of milliseconds to wait */ |
| static unsigned long tpm_tis_i2c_calc_ordinal_duration(struct tpm_chip *chip, |
| u32 ordinal) |
| { |
| int duration_idx = TPM_UNDEFINED; |
| int duration = 0; |
| |
| if (ordinal < TPM_MAX_ORDINAL) { |
| duration_idx = tpm_ordinal_duration[ordinal]; |
| } else if ((ordinal & TPM_PROTECTED_ORDINAL_MASK) < |
| TPM_MAX_PROTECTED_ORDINAL) { |
| duration_idx = tpm_protected_ordinal_duration[ |
| ordinal & TPM_PROTECTED_ORDINAL_MASK]; |
| } |
| |
| if (duration_idx != TPM_UNDEFINED) |
| duration = chip->duration[duration_idx]; |
| |
| if (duration <= 0) |
| return 2 * 60 * HZ; /* Two minutes timeout */ |
| else |
| return duration; |
| } |
| |
| static ssize_t tpm_tis_i2c_transmit(const unsigned char *buf, size_t bufsiz) |
| { |
| int rc; |
| u32 count, ordinal; |
| unsigned long start, stop; |
| |
| struct tpm_chip *chip = &g_chip; |
| |
| /* switch endianess: big->little */ |
| count = get_unaligned_be32(buf + TPM_CMD_COUNT_BYTE); |
| ordinal = get_unaligned_be32(buf + TPM_CMD_ORDINAL_BYTE); |
| |
| if (count == 0) { |
| error("no data\n"); |
| return -ENODATA; |
| } |
| if (count > bufsiz) { |
| error("invalid count value %x %zx\n", count, bufsiz); |
| return -E2BIG; |
| } |
| |
| debug("Calling send\n"); |
| rc = tpm_tis_i2c_send(chip, (u8 *)buf, count); |
| debug(" ... done calling send\n"); |
| if (rc < 0) { |
| error("tpm_transmit: tpm_send: error %d\n", rc); |
| goto out; |
| } |
| |
| if (chip->irq) |
| goto out_recv; |
| |
| start = get_timer(0); |
| stop = tpm_tis_i2c_calc_ordinal_duration(chip, ordinal); |
| do { |
| debug("waiting for status... %ld %ld\n", start, stop); |
| u8 status = tpm_tis_i2c_status(chip); |
| if ((status & chip->req_complete_mask) == |
| chip->req_complete_val) { |
| debug("...got it;\n"); |
| goto out_recv; |
| } |
| |
| if (status == chip->req_canceled) { |
| error("Operation Canceled\n"); |
| rc = -ECANCELED; |
| goto out; |
| } |
| mdelay(TPM_TIMEOUT_MS); |
| } while (get_timer(start) < stop); |
| |
| tpm_tis_i2c_ready(chip); |
| error("Operation Timed out\n"); |
| rc = -ETIME; |
| goto out; |
| |
| out_recv: |
| debug("out_recv: reading response...\n"); |
| rc = tpm_tis_i2c_recv(chip, (u8 *)buf, TPM_BUFSIZE); |
| if (rc < 0) |
| error("tpm_transmit: tpm_recv: error %d\n", rc); |
| |
| out: |
| return rc; |
| } |
| |
| /** |
| * Decode TPM configuration. |
| * |
| * @param dev Returns a configuration of TPM device |
| * @return 0 if ok, -1 on error |
| */ |
| static int tpm_tis_i2c_decode_config(struct tpm_chip *chip) |
| { |
| const void *blob = gd->fdt_blob; |
| struct udevice *bus; |
| int chip_addr; |
| int parent; |
| int node; |
| int ret; |
| |
| node = fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9635_TPM); |
| if (node < 0) { |
| node = fdtdec_next_compatible(blob, 0, |
| COMPAT_INFINEON_SLB9645_TPM); |
| } |
| if (node < 0) { |
| debug("%s: Node not found\n", __func__); |
| return -1; |
| } |
| parent = fdt_parent_offset(blob, node); |
| if (parent < 0) { |
| debug("%s: Cannot find node parent\n", __func__); |
| return -1; |
| } |
| |
| /* |
| * TODO(sjg@chromium.org): Remove this when driver model supports |
| * TPMs |
| */ |
| ret = uclass_get_device_by_of_offset(UCLASS_I2C, parent, &bus); |
| if (ret) { |
| debug("Cannot find bus for node '%s: ret=%d'\n", |
| fdt_get_name(blob, parent, NULL), ret); |
| return ret; |
| } |
| |
| chip_addr = fdtdec_get_int(blob, node, "reg", -1); |
| if (chip_addr == -1) { |
| debug("Cannot find reg property for node '%s: ret=%d'\n", |
| fdt_get_name(blob, node, NULL), ret); |
| return ret; |
| } |
| /* |
| * TODO(sjg@chromium.org): Older TPMs will need to use the older method |
| * in tpm_tis_i2c_read() so the offset length needs to be 0 here. |
| */ |
| ret = i2c_get_chip(bus, chip_addr, 1, &chip->dev); |
| if (ret) { |
| debug("Cannot find device for node '%s: ret=%d'\n", |
| fdt_get_name(blob, node, NULL), ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int tis_init(void) |
| { |
| if (g_chip.inited) |
| return 0; |
| |
| if (tpm_tis_i2c_decode_config(&g_chip)) |
| return -1; |
| |
| debug("%s: done\n", __func__); |
| |
| g_chip.inited = 1; |
| |
| return 0; |
| } |
| |
| int tis_open(void) |
| { |
| int rc; |
| |
| if (!g_chip.inited) |
| return -1; |
| |
| debug("%s: start\n", __func__); |
| if (g_chip.is_open) |
| return -EBUSY; |
| rc = tpm_tis_i2c_init(g_chip.dev); |
| if (rc < 0) |
| g_chip.is_open = 0; |
| |
| return rc; |
| } |
| |
| int tis_close(void) |
| { |
| if (!g_chip.inited) |
| return -1; |
| |
| if (g_chip.is_open) { |
| tpm_tis_i2c_release_locality(&g_chip, g_chip.locality, 1); |
| g_chip.is_open = 0; |
| } |
| |
| return 0; |
| } |
| |
| int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size, |
| uint8_t *recvbuf, size_t *rbuf_len) |
| { |
| int len; |
| uint8_t buf[4096]; |
| |
| if (!g_chip.inited) |
| return -1; |
| |
| if (sizeof(buf) < sbuf_size) |
| return -1; |
| |
| memcpy(buf, sendbuf, sbuf_size); |
| |
| len = tpm_tis_i2c_transmit(buf, sbuf_size); |
| |
| if (len < 10) { |
| *rbuf_len = 0; |
| return -1; |
| } |
| |
| memcpy(recvbuf, buf, len); |
| *rbuf_len = len; |
| |
| return 0; |
| } |