| config AHCI |
| bool "Support SATA controllers with driver model" |
| depends on DM |
| help |
| This enables a uclass for disk controllers in U-Boot. Various driver |
| types can use this, such as AHCI/SATA. It does not provide any standard |
| operations at present. The block device interface has not been converted |
| to driver model. |
| |
| config SATA |
| bool "Support SATA controllers" |
| depends on BLK |
| select HAVE_BLOCK_DEVICE |
| help |
| This enables support for SATA (Serial Advanced Technology |
| Attachment), a serial bus standard for connecting to hard drives and |
| other storage devices. |
| |
| SATA replaces PATA (originally just ATA), which stands for Parallel AT |
| Attachment, where AT refers to an IBM AT (Advanced Technology) |
| computer released in 1984. |
| |
| See also CMD_SATA which provides command-line support. |
| |
| config LIBATA |
| bool |
| help |
| Select this to build and link the libata helper functions. |
| |
| config SCSI_AHCI |
| bool "Enable SCSI interface to SATA devices" |
| select LIBATA |
| help |
| Enable this to allow interfacing SATA devices via the SCSI layer. |
| |
| menu "SATA/SCSI device support" |
| |
| config AHCI_PCI |
| bool "Support for PCI-based AHCI controller" |
| depends on PCI |
| depends on DM_SCSI |
| help |
| Enables support for the PCI-based AHCI controller. |
| |
| if AHCI |
| |
| config SPL_AHCI_PCI |
| bool "Support for PCI-based AHCI controller for SPL" |
| depends on SPL |
| depends on SPL_PCI |
| depends on SPL_SATA && DM_SCSI |
| |
| config DWC_AHCI |
| bool "Enable Synopsys DWC AHCI driver support" |
| select SCSI_AHCI |
| select PHY |
| depends on DM_SCSI |
| help |
| Enable this driver to support Sata devices through |
| Synopsys DWC AHCI module. |
| |
| config DWC_AHSATA |
| bool "Enable DWC AHSATA driver support" |
| select LIBATA |
| depends on BLK |
| help |
| Enable this driver to support the DWC AHSATA SATA controller found |
| in i.MX5 and i.MX6 SoCs. |
| |
| config DWC_AHSATA_AHCI |
| bool "Enable DWC AHSATA AHCI driver support" |
| depends on DWC_AHSATA |
| default y |
| help |
| Enable this option unless you need your private ahci implementation |
| |
| config MTK_AHCI |
| bool "Enable Mediatek AHCI driver support" |
| help |
| Enable this driver to support Sata devices through |
| Mediatek AHCI controller (e.g. MT7622). |
| |
| config AHCI_MVEBU |
| bool "Marvell EBU AHCI SATA support" |
| depends on ARCH_MVEBU || ARCH_OCTEON |
| select SCSI_AHCI |
| select DM_SCSI |
| help |
| This option enables support for the Marvell EBU SoC's |
| onboard AHCI SATA. |
| |
| If unsure, say N. |
| |
| config SUNXI_AHCI |
| bool "Enable Allwinner SATA driver support" |
| default y if ARCH_SUNXI |
| help |
| Enable this driver to support the SATA controllers found in the |
| Allwinner A10, A20 and R40 SoCs. |
| |
| endif # AHCI |
| |
| if SATA |
| |
| config SATA_CEVA |
| bool "Ceva Sata controller" |
| depends on AHCI |
| depends on DM_SCSI |
| help |
| This option enables Ceva Sata controller hard IP available on Xilinx |
| ZynqMP. Support up to 2 external devices. Compliant with SATA 3.1 and |
| AHCI 1.3 specifications with hot-plug detect feature. |
| |
| config FSL_SATA |
| bool "Enable Freescale SATA controller driver support" |
| depends on PPC |
| select AHCI |
| select LIBATA |
| imply LBA48 |
| help |
| Enable this driver to support the SATA controller found in |
| some Freescale PowerPC SoCs. |
| |
| config FSL_SATA_V2 |
| bool "Enable support for V2 of the Freescale SATA controller" |
| depends on FSL_SATA |
| help |
| Enable support for V2 of this controller, rather than V1. |
| |
| config SATA_MV |
| bool "Enable Marvell SATA controller driver support" |
| select AHCI |
| select LIBATA |
| help |
| Enable this driver to support the SATA controller found in |
| some Marvell SoCs. |
| |
| config SATA_SIL |
| bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support" |
| select AHCI |
| select LIBATA |
| help |
| Enable this driver to support the SIL3131, SIL3132 and SIL3124 |
| SATA controllers. |
| |
| config SYS_SATA_MAX_DEVICE |
| int "Maximum number of SATA devices" |
| depends on !AHCI || FSL_SATA || SATA_MV |
| help |
| Sets the maximum number of SATA devices which can be supported |
| by U-Boot. |
| |
| This is only partially converted to driver model. See sata_bread() |
| for example, which shows where the conversion needs to be completed. |
| |
| endif # SATA |
| |
| endmenu |