| #include "skeleton.dtsi" |
| #include <dt-bindings/clock/tegra186-clock.h> |
| #include <dt-bindings/gpio/tegra186-gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/mailbox/tegra186-hsp.h> |
| #include <dt-bindings/power/tegra186-powergate.h> |
| #include <dt-bindings/reset/tegra186-reset.h> |
| |
| / { |
| compatible = "nvidia,tegra186"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| gpio_main: gpio@2200000 { |
| compatible = "nvidia,tegra186-gpio"; |
| reg-names = "security", "gpio"; |
| reg = |
| <0x0 0x2200000 0x0 0x10000>, |
| <0x0 0x2210000 0x0 0x10000>; |
| interrupts = |
| <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| ethernet@2490000 { |
| compatible = "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"; |
| reg = <0x0 0x02490000 0x0 0x10000>; |
| interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&bpmp TEGRA186_CLK_AXI_CBB>, |
| <&bpmp TEGRA186_CLK_EQOS_AXI>, |
| <&bpmp TEGRA186_CLK_EQOS_RX>, |
| <&bpmp TEGRA186_CLK_EQOS_PTP_REF>, |
| <&bpmp TEGRA186_CLK_EQOS_TX>; |
| clock-names = "slave_bus", |
| "master_bus", |
| "rx", |
| "ptp_ref", |
| "tx"; |
| resets = <&bpmp TEGRA186_RESET_EQOS>; |
| reset-names = "eqos"; |
| phy-mode = "rgmii"; |
| status = "disabled"; |
| }; |
| |
| uarta: serial@3100000 { |
| compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; |
| reg = <0x0 0x03100000 0x0 0x10000>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| gen1_i2c: i2c@3160000 { |
| compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; |
| reg = <0x0 0x3160000 0x0 0x100>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&bpmp TEGRA186_CLK_I2C1>; |
| clock-names = "div-clk"; |
| resets = <&bpmp TEGRA186_RESET_I2C1>; |
| reset-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| cam_i2c: i2c@3180000 { |
| compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; |
| reg = <0x0 0x3180000 0x0 0x100>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&bpmp TEGRA186_CLK_I2C3>; |
| clock-names = "div-clk"; |
| resets = <&bpmp TEGRA186_RESET_I2C3>; |
| reset-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| dp_aux_ch1_i2c: i2c@3190000 { |
| compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; |
| reg = <0x0 0x3190000 0x0 0x100>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&bpmp TEGRA186_CLK_I2C4>; |
| clock-names = "div-clk"; |
| resets = <&bpmp TEGRA186_RESET_I2C4>; |
| reset-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| dp_aux_ch0_i2c: i2c@31b0000 { |
| compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; |
| reg = <0x0 0x31b0000 0x0 0x100>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&bpmp TEGRA186_CLK_I2C6>; |
| clock-names = "div-clk"; |
| resets = <&bpmp TEGRA186_RESET_I2C6>; |
| reset-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| gen7_i2c: i2c@31c0000 { |
| compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; |
| reg = <0x0 0x31c0000 0x0 0x100>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&bpmp TEGRA186_CLK_I2C7>; |
| clock-names = "div-clk"; |
| resets = <&bpmp TEGRA186_RESET_I2C7>; |
| reset-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| gen9_i2c: i2c@31e0000 { |
| compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; |
| reg = <0x0 0x31e0000 0x0 0x100>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&bpmp TEGRA186_CLK_I2C9>; |
| clock-names = "div-clk"; |
| resets = <&bpmp TEGRA186_RESET_I2C9>; |
| reset-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| sdhci@3400000 { |
| compatible = "nvidia,tegra186-sdhci"; |
| reg = <0x0 0x03400000 0x0 0x200>; |
| resets = <&bpmp TEGRA186_RESET_SDMMC1>; |
| reset-names = "sdhci"; |
| clocks = <&bpmp TEGRA186_CLK_SDMMC1>; |
| interrupts = <GIC_SPI 62 0x04>; |
| status = "disabled"; |
| }; |
| |
| sdhci@3460000 { |
| compatible = "nvidia,tegra186-sdhci"; |
| reg = <0x0 0x03460000 0x0 0x200>; |
| resets = <&bpmp TEGRA186_RESET_SDMMC4>; |
| reset-names = "sdhci"; |
| clocks = <&bpmp TEGRA186_CLK_SDMMC4>; |
| interrupts = <GIC_SPI 31 0x04>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@3881000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0x3881000 0x0 0x1000>, |
| <0x0 0x3882000 0x0 0x2000>, |
| <0x0 0x3884000 0x0 0x2000>, |
| <0x0 0x3886000 0x0 0x2000>; |
| interrupts = <GIC_PPI 9 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| hsp: hsp@3c00000 { |
| compatible = "nvidia,tegra186-hsp"; |
| reg = <0x0 0x03c00000 0x0 0xa0000>; |
| interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "doorbell"; |
| #mbox-cells = <2>; |
| }; |
| |
| gen2_i2c: i2c@c240000 { |
| compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; |
| reg = <0x0 0xc240000 0x0 0x100>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&bpmp TEGRA186_CLK_I2C2>; |
| clock-names = "div-clk"; |
| resets = <&bpmp TEGRA186_RESET_I2C2>; |
| reset-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| gen8_i2c: i2c@c250000 { |
| compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; |
| reg = <0x0 0xc250000 0x0 0x100>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&bpmp TEGRA186_CLK_I2C8>; |
| clock-names = "div-clk"; |
| resets = <&bpmp TEGRA186_RESET_I2C8>; |
| reset-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| gpio_aon: gpio@c2f0000 { |
| compatible = "nvidia,tegra186-gpio-aon"; |
| reg-names = "security", "gpio"; |
| reg = |
| <0x0 0xc2f0000 0x0 0x1000>, |
| <0x0 0xc2f1000 0x0 0x1000>; |
| interrupts = |
| <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pcie@10003000 { |
| compatible = "nvidia,tegra186-pcie"; |
| device_type = "pci"; |
| reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ |
| 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ |
| 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ |
| reg-names = "pads", "afi", "cs"; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* MSI interrupt */ |
| <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; /* Wake interrupt */ |
| interrupt-names = "intr", "msi", "wake"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| |
| bus-range = <0x00 0xff>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ |
| 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ |
| 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ |
| 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ |
| 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07f00000 /* non-prefetchable memory (127 MiB) */ |
| 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ |
| |
| clocks = <&bpmp TEGRA186_CLK_PCIE>, |
| <&bpmp TEGRA186_CLK_AFI>; |
| clock-names = "pex", "afi"; |
| resets = <&bpmp TEGRA186_RESET_PCIE>, |
| <&bpmp TEGRA186_RESET_AFI>, |
| <&bpmp TEGRA186_RESET_PCIEXCLK>; |
| reset-names = "pex", "afi", "pcie_x"; |
| power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; |
| status = "disabled"; |
| |
| pci@1,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>; |
| reg = <0x000800 0 0 0 0>; |
| status = "disabled"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| |
| nvidia,num-lanes = <2>; |
| }; |
| |
| pci@2,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>; |
| reg = <0x001000 0 0 0 0>; |
| status = "disabled"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| |
| nvidia,num-lanes = <1>; |
| }; |
| |
| pci@3,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>; |
| reg = <0x001800 0 0 0 0>; |
| status = "disabled"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| |
| nvidia,num-lanes = <1>; |
| }; |
| }; |
| |
| sysram@30000000 { |
| compatible = "nvidia,tegra186-sysram", "mmio-sram"; |
| reg = <0x0 0x30000000 0x0 0x50000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>; |
| |
| sysram_cpu_bpmp_tx: shmem@4e000 { |
| compatible = "nvidia,tegra186-bpmp-shmem"; |
| reg = <0x0 0x4e000 0x0 0x1000>; |
| }; |
| |
| sysram_cpu_bpmp_rx: shmem@4f000 { |
| compatible = "nvidia,tegra186-bpmp-shmem"; |
| reg = <0x0 0x4f000 0x0 0x1000>; |
| }; |
| }; |
| |
| bpmp: bpmp { |
| compatible = "nvidia,tegra186-bpmp"; |
| mboxes = <&hsp HSP_MBOX_TYPE_DB HSP_DB_MASTER_BPMP>; |
| /* |
| * In theory, these references, and the configuration in the |
| * node these reference point at, are board-specific, since |
| * they depend on the BCT's memory carve-out setup, the |
| * firmware that's actually loaded onto the BPMP, etc. However, |
| * in practice, all boards are likely to use identical values. |
| */ |
| shmem = <&sysram_cpu_bpmp_tx &sysram_cpu_bpmp_rx>; |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| #reset-cells = <1>; |
| |
| bpmp_i2c: i2c { |
| compatible = "nvidia,tegra186-bpmp-i2c"; |
| nvidia,bpmp-bus-id = <5>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| }; |